Deuterium-tritium Reaction Research Articles

Direct-drive ICF target with compound ablator containing a low-density component

The results of theoretical investigation of implosion and combustion of a direct-drive inertial confinement fusion (ICF) target as a shell with compound outer layer (ablator) intended to absorb laser radiation and produce the ablation pressure compressing the target are presented. It is proposed to supplement the solid ablator of conventional ICF target with an outer layer of a low-density porous substance with density corresponding to the nearly critical one of laser-produced plasma. It is shown that for a laser pulse with energy of 2–3 MJ, designed to ignite the deuterium-tritium reaction in modern experiments, the target with a compound ablator can provide a significant increase in fusion energy yield when the mass fraction of low-density component is in (10–15) % interval.

Conceptual design study of the tritium breeding unit for verifying the long-term performance of the breeding blanket

Fusion reactors produce high-energy neutrons through the Deuterium-Tritium (DT) reaction. The long-term performance verification and structural integrity assessment of the breeding blanket under continuous plasma operation are essential for the development of Demonstration fusion power reactor (DEMO) breeding blankets. The Korea Institute of Fusion Energy (KFE) has been planning the construction of a test facility called the Integrated Breeding Test Facility (IBTF) that uses a linear accelerator as the neutron source. A solid beryllium target has been considered to generate fusion-like neutrons. A conceptual design of the Tritium Breeding Unit (TBU), which is a key component of the breeding blanket, has been carried out. This study evaluated tritium production under fusion-like conditions using factors such as the position and thickness of the graphite block, the thickness of the first wall, and the radial length of the breeding zone. The results showed that increasing graphite block thickness and optimizing the dimensions of the TBU enhanced tritium production. However, these changes affected the structural integrity of the TBU. The side wall of the TBU experienced membrane plus bending stress, which exceeded the Level C and D acceptance criteria under the assumption of In-Box LOCA. Measures were investigated to ensure structural integrity while improving tritium production of the TBU.

Formation of orientation-dependent surface morphologies on tungsten after low energy helium plasma exposure: multiscale characterization and new insights

In ITER, the helium (He) impurity produced by the deuterium-tritium reaction will bombard the tungsten (W) divertor armor at the strike points. Consequently, strong interaction occurs therein that both impact the performance of the plasmas and the lifetime of the divertor. Despite an ever-increasing understanding of this interaction, some experimental phenomena remain mysterious, especially the formation of orientation-dependent surface morphologies. Here, we combine multiscale experimental characterization and theoretical models to shed new light on this problem. After low-energy He plasma exposure in a linear plasma generator, the polycrystalline W surface developed various morphologies. Through electron backscatter diffraction analysis, we found that the {111} grains developed cube-corner structures, the {110} grains developed ripple structures, whereas the {100} grains remained smooth. Then, electron-transparent lamellae were extracted from such grains to observe the subsurface He bubbles by transmission electron microscopy. The volume density, size distribution, and depth range of the He bubbles weakly depend on the crystallographic orientation, suggesting that the migration of W atoms causes the morphology variety. Accordingly, we proposed a two-stage formation mechanism. First, W atoms generated by over-pressurized He bubbles glide on the slip plane and in the slip direction to reach the surface, forming characteristic patterns that are enclosed by the slip traces. Second, morphological instability drives the evolution of the surface patterns, in which the initial surface structure and surface self-diffusion kinetics mediate. The proposed mechanism has been incorporated into a topographical instability model to enable asemi-quantitative analysis. The obtained new insights are valuable to the impurity control of the core plasmas and the lifetime analysis of the divertor for ITER.

Alpha particle loss measurements and analysis in JET DT plasmas

Burning reactor plasmas will be self-heated by fusion born alpha particles from deuterium-tritium reactions. Consequently, a thorough understanding of the confinement and transport of DT-born alpha particles is necessary to maintain the plasma self-heating. Measurements of fast ion losses provide a direct means to monitor alpha particle confinement. JET’s 2021–2022 second experimental DT-campaign offers burning plasma scenarios with advanced fast ion loss diagnostics for the first time in nearly 25 years. Coherent and non-coherent alpha losses were observed due to a variety of low frequency MHD activity. This manuscript will present the loss mechanisms, spatial and pitch dependencies, scalings with plasma parameters, correlations with wall impurities, and magnitude of DT-alpha born losses.

Measurement of the Gamma-Ray-to-Neutron Branching Ratio for the Deuterium-Tritium Reaction in Magnetic Confinement Fusion Plasmas.

At present, magnetic confinement fusion devices rely solely on absolute neutron counting as a direct way of measuring fusion power. Absolute counting of deuterium-tritium gamma rays could provide the secondary neutron-independent technique required for the validation of scientific results and as a licensing tool for future power plants. However, this approach necessitates an accurate determination of the gamma-ray-to-neutron branching ratio. The gamma-ray-to-neutron branching ratio for the deuterium-tritium reaction ^{3}H(^{2}H,γ)^{5}He/^{3}H(^{2}H,n)^{4}He was determined in magnetic confinement fusion plasmas at the Joint European Torus in predominantly deuterium beam heated plasmas. The branching ratio was found to be equal to (2.4±0.5)×10^{-5} over the deuterium energy range of (80±20) keV. This accurate determination of the deuterium-tritium branching ratio paves the way for a direct and neutron-independent measurement of fusion power in magnetic confinement fusion reactors, based on the absolute counting of deuterium-tritium gamma rays.

Introduction to Special Issue on the Early History of Nuclear Fusion

This introductory paper to the special issue of Fusion Science and Technology commemorates early research on fusion conducted at Los Alamos (the singular entity denoted Los Alamos Laboratory/Los Alamos Scientific Laboratory/Los Alamos National Laboratory at different times is designated “Los Alamos” in this paper) in support of the eventual H-bomb program. We survey the historical origins of the thermonuclear program, what was known of fusion reactions at the outbreak of the war, and the remarkable breakthroughs involving particularly the prospect of deuterium-tritium (DT) reactions conducted during the war, and we summarize the papers in this volume. Much of the nuclear fusion technical history presented herein has not been previously reported. Papers describe aspects of fusion science during these days, on shock hydrodynamics and on electron-radiation coupling, and on nuclear physics including the discoveries of resonances in both the DT cross section and in the lithium tritium-breeding cross section. Three papers follow our colleague Mark Paris’s finding Arthur Ruhlig’s 1938 paper on the first observation of DT fusion: one on how it influenced subsequent Manhattan Project research, another on a modern calculation of that historic experiment, and a third that has repeated the experiment using modern experimental capabilities. Other papers discuss how the first H-bomb test, Ivy Mike, led to the discovery of the new elements einsteinium and fermium and how the DT fusion processes played a key role in our universe’s development after the Big Bang. We also present a paper that analyzes the pioneering Cambridge University 1934 experiment by Marcus Oliphant, Paul Harteck, and Ernest Rutherford where deuterium-deuterium fusion was first observed and that describes how Ernest Lawrence missed identifying fusion in 1933. Finally, we present a summary of early concepts for controlled fusion energy that grew out of wartime discussions at Los Alamos. The papers show how J. Robert Oppenheimer played a leading technical role in the early developments of the H-bomb, before his later opposition—our first paper in this issue addresses the U.S. Department of Energy’s 2022 vacating of the earlier 1954 decision to revoke his security clearance.

Neutron emission characterization of IPR 14 MeV neutron generator

Accelerator-based neutron sources are being developed worldwide due to their wide applications. Institute for Plasma Research in India has developed an accelerator-based high-yield 14 MeV neutron generator based on deuterium-tritium (D-T) reaction to perform fusion-related benchmark experiments. This neutron generator is designed to produce 1012 neutrons per second in both mode continuous and pulse. The emission of neutrons from an accelerator-based neutron generator is not isotropic due to target geometry and angular dependency of reaction cross-section. A detailed and accurate description of neutron source emission and distribution is required to use such a neutron generator for various experiments. The neutron generator is characterized using experiments and simulations to accomplish the request. Energy and angular distributions of emitted neutrons are measured using a calibrated single crystal diamond (SCD) detector. Experimental data of neutron distributions are used to validate source neutron definition for Monte Carlo N Particle (MCNP) simulation. An accurate model of the Titanium Tritide (TiT) target and its holder geometry is prepared for the simulation. Finally, to validate the simulation model, simulated neutron fluxes are compared with measured ones by the SCD detector. This paper discusses the methodology adopted to characterize emitted neutrons and its results.

Anthropic Importance of the “Bretscher State” in DT Fusion

The term “Bretscher state” may not be as familiar as “Hoyle state,” but its anthropic importance cannot be overstated. In Big Bang nucleosynthesis, the deuterium-tritium (DT) fusion reaction 3H ( d , n ) 4 He, enhanced by the 3/2+ resonance due to the Bretscher state, is responsible for ∼ 99 % of primordial 4He. While this fact has been known for decades, it has not been widely appreciated, and we recently proposed that its significance be commemorated by naming the 3/2+ state after Egon Bretscher, its discoverer. The importance of the resonant nature of the DT fusion reaction has been amplified by recent activities related to the production and use of terrestrial fusion including recent, net gain shots at the National Ignition Facility. Here, we aim to highlight the anthropic importance of the 4He-producing DT reaction that plays such a prominent role in models of nucleosynthetic processes occurring in the early universe. This primordial helium serves as a source for the subsequent creation of ≥ 25 % of the carbon, 12C and other heavier elements that comprise a substantial fraction of the human body. Further studies are required to determine a better characterization of the amount of 12C than this lower limit of 25%. Some scenarios of core stellar nucleosynthetic yield of 12C suggest that even higher percentages of carbon from primordial helium are possible.

Proton-boron fusion scheme taking into account the effects of target degeneracy

The proton-boron (p-B11) reaction is regarded as the holy grail of advanced fusion fuels, since the primary reaction produces three α particles with few neutrons and induced radioactivities from second order reactions. Compared to the deuterium-tritium reaction a much higher reaction temperature is required. Moreover, bremsstrahlung energy losses due to the high nuclear charge of boron deem it seemingly apparent than a fusion reactor based on deuterium-tritium plasma in equilibrium is to say the least very difficult. It is becoming more appealing to collide intense laser beams or accelerated proton beams with a boron target to produce p-B11 reactions. The fusion yield of p-B11 reactions is closely related to proton beam parameters and boron target conditions such as density, temperature, and ingredients. Degeneracy will increase fusion yields by reducing the stopping power of injected protons. In this work, we suggest a scheme for beam-target p-B11 fusions via injecting a MeV proton beam into a highly compressed quantum degenerated boron target. Such a boron target can be achieved via quasi-isentropic compression of solid boron by using precisely shaped laser pulses. Our results indicate that for densities ranging from 103 to 104ρs, where ρs is the density of solid boron, contributions of bound and free electrons to the stopping of protons can be completely disregarded and dramatically reduced, respectively. The result is an increase in fusion yield by orders of magnitude. Furthermore, in order to achieve multiplication factor F greater than one, with F defined as the ratio of output fusion energy to the energy of injected protons, it is found there exists a minimum possible density of boron target, which is 1.8×105ρs when the kinetic energy of injected protons is 880 keV. Published by the American Physical Society 2024

IFMIF/EVEDA achievements overview

In a fusion reactor, the plasma based on a deuterium-tritium reaction generates high energy neutron flux interacting with the materials of the plasma facing components. In order to study the irradiated behavior of these materials, the International Fusion Materials Irradiation Facility (IFMIF) was conceived to generate these fusion relevant neutrons through d-Li stripping source. IFMIF is presently in its Engineering Validation and Engineering Design Activities (EVEDA) phase under the Broader Approach agreement signed between EURATOM and Japanese Government in 2007. This agreement mandates the IFMIF/EVEDA project to validate the design of the different systems of IFMIF and to produce an integrated engineering design of IFMIF, together with the data necessary for future decisions on its construction and operation. While the Engineering Validation Activity (EVA) of the Lithium Target Facility and the Test Facility was completed by constructing prototypes, the EVA of the Accelerator Facility with the Linear IFMIF Prototype Accelerator (LIPAc) is still on-going at the Rokkasho Fusion Institute, Japan. This paper overviews the achievements in the previous phase ended on 31 March 2020 and the progress in the current phase to complete the commissioning of the LIPAc.

Classical Thermodynamic Analysis of D-Based Nuclear Fusion Reactions: The Role of Entropy

In this work, the feasibility of nuclear processes is studied via classical thermodynamics by assessing the change in entropy, a parameter that has so far been neglected in the analysis of these reactions. The contribution of the entropy to the reaction spontaneity plays a different role in the fission and fusion reactions. In particular, in fusion reactions the temperature acts as a very powerful amplifier of the entropic term (−T ΔS) that, at the temperature of tokamaks (millions Kelvin), may significantly reduce the thermodynamic spontaneity of these processes. A new approach is followed for assessing the feasibility of the D-based reactions of interest for the magnetically confined nuclear fusion through the investigation of the effect of the temperature on both kinetics and thermodynamics. The results confirm that the deuterium–tritium reaction is the most promising fusion reaction to be realized in tokamak devices. At the temperature of 1.5 × 108 K (≈13 keV), the DT reaction exhibits a large thermodynamic spontaneity (ΔG = 16.0 MeV) and its reactivity is of the order of 10−22 m3/s, a value capable of guaranteeing the tritium burning rate needed to operate the nuclear plants under tritium self-sufficiency conditions and with a net energy production. The other results show that at the tokamaks’ temperature the two branches of the DD reaction exhibit a modest spontaneity (ΔG around −2 MeV) coupled to very low reactivity values (10−24 m3/s). The temperature rise that could be aimed to increase the reactivity is however ineffective to improve the reaction feasibility since it would augment the entropic term as well, thus shifting the ΔG towards positive values. The D3He reaction is soundly spontaneous at the tokamaks’ temperature (ΔG values of −17.2 MeV) while its kinetics is close to that of the DD reactions, which are at least two orders of magnitude lower than that of the DT reaction.

High-Sensitivity Thomson Spectrometry in Experiments of Laser-Driven Low-Rate NeutronLess Fusion Reactions

The aneutronic 11B(p, α)2α fusion reaction driven by the interaction of high-energy lasers with matter has become a popular topic of research, since it represents a potential long-term goal alternative to the most studied deuterium-tritium reaction. However, the detection of the typical ionic products, especially alpha particles, of this low-rate fusion reaction is a challenging issue, due to their low flux. One of the diagnostic devices that can be implemented in laser-driven proton-boron fusion experiments is a Thomson spectrometer (TS), which is capable of detecting and discriminating ions according to their mass-to-charge ratio (A/Z, where A is the mass number and Z is the atomic number of the ions). In this work, we report on the ultimate test of a TS, which was designed and developed at the ENEA Research Centre in Frascati, Italy, in the context of a p + 11B fusion experiment. Our device—designed to have high sensitivity and a robust shielding against electromagnetic pulses (EMPs)—was implemented at the PALS laser facility (∼700 J in ∼350 ps pulses) at a distance of 367 mm from the laser-plasma interaction point. We analyse here the measured signals obtained with our device, focusing on the assessment of their signal-to-background ratio. Despite the presence of strong EMPs and background radiation at such a short distance from the laser-irradiated target, the TS proved to be suitable for effectively detecting protons and heavier ions stemming from the plasma source.

Study of alpha particle concentration effects as the ash of deuterium-tritium fusion reaction on ignition criteria

In this study, the ignition criteria in the International Thermonuclear Experimental Reactor (ITER) associated with helium concentration is investigated. The main fuels used in this study are deuterium-tritium. Helium as the ash of deuterium-tritium reaction cannot be avoided. In this work, the effects of alpha particle concentration on plasma operation are investigated. The calculations were performed by using zero-dimensional power and particle balance equations. The results of our calculations show that the temporal evolution of alpha particle concentration becomes constant at 0.14. Then, ignition criteria and saddle points have been studied in n e τ E −T, and −T planes for different alpha particle concentrations.

Influence of the impurities in the hybrid discharges with high power in JET ILW

The aim of this paper is to numerically study the influences of the impurities on the high power hybrid discharges in the JET ITER-like wall (ILW) configuration in the DD and deuterium–tritium (DT) scenarios. Numerical simulations with the COREDIV code of hybrid discharges with 32 MW auxiliary heating, 2.2 MA plasma current and 2.8 T toroidal magnetic field in the ILW corner configuration are presented. In the simulations five impurity species are used: intrinsic: beryllium (Be) and nickel (Ni) from the side walls, helium (He) from DT reaction, tungsten (W) from divertor and extrinsic neon (Ne) or argon (Ar) by gas puff. The extrapolation of the DD discharges to DT plasmas at the original input power of 32 MW and taking into account only the thermal component of the alpha-power, does not show any significant difference regarding the power to the target with respect to the DD case. Simulations show that sputtering due to D and T is negligible. In contrast, the simulations at auxiliary heating 39 MW show that the power to the target is possibly too high to be sustained for about 5 s by strike-point sweeping alone without any control by Ne seeding. The tungsten is produced mainly by Ni, Be and seeded impurities.

A Study of the Requirements of p-11B Fusion Reactor by Tokamak System Code

Most tokamak devices including ITER exploit the deuterium-tritium reaction due to its high reactivity, but the wall loading caused by the associated 14-MeV neutrons will limit the further development of fusion performance at high beta. To explore the p-11B fusion cycle, a tokamak system code is extended to incorporate the relativistic bremsstrahlung since the temperature of electrons approaches the electron rest energy. By choosing an optimum p-11B mix and ion temperature, some representative sets of parameters of the p-11B tokamak reactor, whose fusion gain exceeds 1, have been found under the thermal wall loading limit and beta limit when synchrotron radiation loss is neglected. However, the fusion gain greatly decreases when the effect of synchrotron radiation loss is considered. Helium ash also plays an important role in the fusion performance, and we have found that the helium confinement time must be below the energy confinement time to keep the helium concentration ratio in an acceptable range.

Estimation of the neutron production of KSTAR based on empirical scaling law of the fast ion stored energy and ion density under NBI power and machine size upgrade

Deuterium-tritium reaction is the most promising one in term of the highest nuclear fusion cross-section for the reactor. So it is one of urgent issues to develop materials and components that are simultaneously resistant to high heat flux and high energy neutron flux in realization of the fusion energy. 2.45 MeV neutron production was reported in D-D reaction in KSTAR and regarded as beam-target is the dominant process. The feasibility study of KSTAR to wide area neutron source facility is done in term of D-D and D-T reactions from the empirical scaling law from the mixed fast and thermal stored energy and its projection to cases of heating power upgrade and DT reaction is done.

Deep-learning-enabled Bayesian inference of fuel magnetization in magnetized liner inertial fusion

Fuel magnetization in magneto-inertial fusion (MIF) experiments improves charged burn product confinement, reducing requirements on fuel areal density and pressure to achieve self-heating. By elongating the path length of 1.01 MeV tritons produced in a pure deuterium fusion plasma, magnetization enhances the probability for deuterium–tritium reactions producing 11.8−17.1 MeV neutrons. Nuclear diagnostics thus enable a sensitive probe of magnetization. Characterization of magnetization, including uncertainty quantification, is crucial for understanding the physics governing target performance in MIF platforms, such as magnetized liner inertial fusion (MagLIF) experiments conducted at Sandia National Laboratories, Z-facility. We demonstrate a deep-learned surrogate of a physics-based model of nuclear measurements. A single model evaluation is reduced from O(10–100) CPU hours on a high-performance computing cluster down to O(10) ms on a laptop. This enables a Bayesian inference of magnetization, rigorously accounting for uncertainties from surrogate modeling and noisy nuclear measurements. The approach is validated by testing on synthetic data and comparing with a previous study. We analyze a series of MagLIF experiments systematically varying preheat, resulting in the first ever systematic experimental study of magnetic confinement properties of the fuel plasma as a function of fundamental inputs on any neutron-producing MIF platform. We demonstrate that magnetization decreases from BR∼0.5 to BR∼0.2 MG cm as laser preheat energy deposited increases from Epreheat∼460 J to Epreheat∼1.4 kJ. This trend is consistent with 2D LASNEX simulations showing Nernst advection of the magnetic field out of the hot fuel and diffusion into the target liner.

First spectral measurement of deuterium-tritium fusion γ rays in inertial fusion experiments

The $R$-matrix analysis of $A=5$ nuclear systems has been partially validated by applying the technique to the $^{5}\mathrm{Li}$ system and comparing the predicted $\ensuremath{\gamma}$-ray spectrum with historical data. $R$-matrix analysis of the similar $^{5}\mathrm{He}$ system was then used to predict the $\ensuremath{\gamma}$-ray spectral shape for the deuterium-tritium (DT) reaction. The resulting spectra have been used in the analysis of DT implosions on the Omega laser where the $\ensuremath{\gamma}$-ray interaction rate was measured by a gas Cherenkov detector. Comparison of predictions to experiment confirmed the presence of both 16.75 and $\ensuremath{\approx}13$ MeV $\ensuremath{\gamma}$-ray contributions; analysis, using $R$-matrix spectra, yielded a ratio of $\ensuremath{\gamma}$-ray emission from a transition to the intermediate excited state to that from a transition to the ground state of $(2.1\ifmmode\pm\else\textpm\fi{}0.4):1$, substantiating the first spectral measurement of the DT fusion $\ensuremath{\gamma}$ ray in an inertial fusion environment.

Characterization of plastic scintillator bars using fast neutrons from D-D and D-T reactions

We report results of fast neutron response in plastic scintillator (PS) bars from deuterium-deuterium (D-D) and deuterium-tritium (D-T) reactions using Purnima Neutron Generator Facility, BARC, Mumbai. These measurements are useful in context of Indian Scintillator Matrix for Reactor Anti-Neutrino (ISMRAN) detection, an array of 10×10 PS bars, used to measure reactor anti-neutrinos through inverse beta decay (IBD) signal. ISMRAN detector, an above-ground experiment close to the reactor core (∼13m), deals with an active fast neutron background inside the reactor hall. A good understanding of fast neutron response in PS bars is an essential pre-requisite for suppression and discrimination of fast neutron background from IBD events. A monoenergetic neutron beam from the fusion reaction of D-D at 2.45 MeV and D-T at 14.1 MeV are used to characterize the energy response in these bars. The neutron energy response function has been simulated using the GEANT4 package and are compared with the measured data. A reasonable agreement of deposited energies by fast neutrons in PS bars between data and simulation are obtained for these reactions. The ratio of energy deposition in adjacent bars is used to discriminate between prompt IBD, fast neutron and neutron capture cascade gamma events.

Diagnosing plasma magnetization in inertial confinement fusion implosions using secondary deuterium-tritium reactions.

Diagnosing plasma magnetization in inertial confinement fusion implosions is important for understanding how magnetic fields affect implosion dynamics and to assess plasma conditions in magnetized implosion experiments. Secondary deuterium-tritium (DT) reactions provide two diagnostic signatures to infer neutron-averaged magnetization. Magnetically confining fusion tritons from deuterium-deuterium (DD) reactions in the hot spot increases their path lengths and energy loss, leading to an increase in the secondary DT reaction yield. In addition, the distribution of magnetically confined DD-triton is anisotropic, and this drives anisotropy in the secondary DT neutron spectra along different lines of sight. Implosion parameter space as well as sensitivity to the applied B-field, fuel ρR, temperature, and hot-spot shape will be examined using Monte Carlo and 2D radiation-magnetohydrodynamic simulations.