Detection Of Nucleic Acid Targets Research Articles

Multiplexed electrochemical nucleic acid sensor based on visible light-mediated metal-free thiol-yne click reaction for simultaneous detection of different nucleic acid targets

Simultaneous detection of multiple tumor biomarkers with a simple and low-cost assay is crucial for early cancer detection and diagnosis. Herein, we presented a low-cost and simple assay for multiplexed detection of tumor biomarkers using a spatially separated electrodes strategy. The sensor is fabricated based on a metal-free thiol-yne click reaction, which is mediated by visible light, on commercially available indium tin oxide (ITO) electrodes. Four biomarkers, including p53 DNA, Brca2 DNA, K-ras DNA, and MicroRNA-204 RNA, were used as model analytes, and the corresponding oligonucleotide probes were modified on the desired electrode units sequentially with 530 nm irradiation light in the presence of photosensitizer Eosin Y. By this visible light-mediated coupling reaction, oligonucleotide probe densities of up to 9.2 ± 0.7 × 1010 molecules/cm2 were readily obtained on the ITO electrode surface. The proposed multiplexed E-NA sensor could detect four different nucleic acid targets concurrently without crosstalk among adjacent electrodes and was also successfully applied for detecting targets in a 20% fetal calf serum sample. The detection limits for p53 DNA, Brca2 DNA, K-ras DNA, and MicroRNA-204 RNA were 0.72 nM, 0.97 nM, 2.15 nM, and 1.73 nM, respectively. The developed approach not only has a great potential for developing cost-effective biosensors on affordable substrates for nucleic acid target detection, but also be easily extended to detect other targets by modifying the specific oligonucleotide probes anchored on the electrode.

Multifunctional self-priming hairpin probe-based isothermal nucleic acid amplification and its applications for COVID-19 diagnosis

We herein present a multifunctional self-priming hairpin probe-based isothermal amplification, termed MSH, enabling one-pot detection of target nucleic acids. The sophisticatedly designed multifunctional self-priming hairpin (MSH) probe recognizes the target and rearranges to prime itself, triggering the amplification reaction powered by the continuously repeated extension, nicking, and target recycling. As a consequence, a large number of double-stranded DNA (dsDNA) amplicons are produced that could be monitored in real-time using a dsDNA-intercalating dye. Based on this unique design approach, the nucleocapsid (N) and the open reading frame 1 ab (ORF1ab) genes of SARS-CoV-2 were successfully detected down to 1.664 fM and 0.770 fM, respectively. The practical applicability of our method was validated by accurately diagnosing 60 clinical samples with 93.33% sensitivity and 96.67% specificity. This isothermal one-pot MSH technique holds great promise as a point-of-care testing protocol for the reliable detection of a wide spectrum of pathogens, particularly in resource-limited settings.

Fluorophore and nanozyme-functionalized DNA walking: A dual-mode DNA logic biocomputing platform for microRNA sensing in clinical samples

Inspired by the programmability and modifiability of nucleic acids, point-of-care (POC) diagnostics for nucleic acid target detection is evolving to become more diversified and intelligent. In this study, we introduce a fluorescent and photothermal dual-mode logic biosensing platform that integrates catalytic hairpin assembly (CHA), toehold-mediated stand displacement reaction (SDR) and a DNA walking machine. Dual identification and signal reporting modules are incorporated into DNA circuits, orchestrated by an AND Boolean logic gate operator and magnetic beads (MBs). In the presence of bispecific microRNAs (miRNAs), the AND logic gate activates, driving the DNA walking machine, and facilitating the collection of hairpin DNA stands modified with FAM fluorescent group and CeO2@Au nanoparticles. The CeO2@Au nanoparticles, served as a nanozyme, can oxidize TMB into oxidation TMB (TMBox), enabling a near-infrared (NIR) laser-driven photothermal effect following the magnetic separation of MBs. This versatile platform was employed to differentiate between plasma samples from breast cancer patients, lung cancer patients, and healthy donors. The thermometer-readout transducers, derived from the CeO2@Au@DNA complexes, provided reliable results, further corroborated by fluorescence assays, enhancing the confidence in the diagnostics compared to singular detection method. The dual-mode logic biosensor can be easily customized to various nucleic acid biomarkers and other POC signal readout modalities by adjusting recognition sequences and modification strategies, heralding a promising future in the development of intelligent, flexible diagnostics for POC testing.

Photoactivatable CRISPR/Cas12a Sensors for Biomarkers Imaging and Point-of-Care Diagnostics.

In recent years, the CRISPR/Cas12a-based sensing strategy has shown significant potential for specific target detection due to its rapid and sensitive characteristics. However, the "always active" biosensors are often insufficient to manipulate nucleic acid sensing with high spatiotemporal control. It remains crucial to develop nucleic acid sensing devices that can be activated at the desired time and space by a remotely applied stimulus. Here, we integrated photoactivation with the CRISPR/Cas12a system for DNA and RNA detection, aiming to provide high spatiotemporal control for nucleic acid sensing. By rationally designing the target recognition sequence, this photoactivation CRISPR/Cas12a system could recognize HPV16 and survivin, respectively. We combined the lateral flow assay strip test with the CRISPR/Cas12a system to realize the visualization of nucleic acid cleavage signals, displaying potential instant test application capabilities. Additionally, we also successfully realized the temporary control of its fluorescent sensing activity for survivin by photoactivation in vivo, allowing rapid detection of target nucleic acids and avoiding the risk of contamination from premature leaks during storage. Our strategy suggests that the CRISPR/Cas12a platform can be triggered by photoactivation to sense various targets, expanding the technical toolbox for precise biological and medical analysis. This study represents a significant advancement in nucleic acid sensing and has potential applications in disease diagnosis and treatment.

Cooperative dynamics of DNA-grafted magnetic nanoparticles optimize magnetic biosensing and coupling to DNA origami.

Magnetic nanoparticles (MNPs) provide new opportunities for enzyme-free biosensing of nucleic acid biomarkers and magnetic actuation by patterning on DNA origami, yet how the DNA grafting density affects their dynamics and accessibility remains poorly understood. Here, we performed surface functionalization of MNPs with single-stranded DNA (ssDNA) via click chemistry with a tunable grafting density, which enables the encapsulation of single MNPs inside a functional polymeric layer. We used several complementary methods to show that particle translational and rotational dynamics exhibit a sigmoidal dependence on the ssDNA grafting density. At low densities, ssDNA strands adopt a coiled conformation that results in minor alterations to particle dynamics, while at high densities, they organize into polymer brushes that collectively influence particle dynamics. Intermediate ssDNA densities, where the dynamics are most sensitive to changes, show the highest magnetic biosensing sensitivity for the detection of target nucleic acids. Finally, we demonstrate that MNPs with high ssDNA grafting densities are required to efficiently couple to DNA origami. Our results establish ssDNA grafting density as a critical parameter for the functionalization of MNPs for magnetic biosensing and functionalization of DNA nanostructures.

Progress in polymerase chain reaction technology and its contribution to the tuberculosis diagnostic ecosystem in India: A mini review

The advent of Polymerase Chain Reaction (PCR) has revolutionized the human molecular diagnostic scenario. Its ability to exponentially generate desired stretch of DNA from chromosomal or complimentary DNA has laid the foundation for sensitive and specific detection of a pathogen or an aberrant stretch of DNA. Importantly, PCR technology has helped generate diagnostic immunity from phenotypic variation of pathogenic targets. The technological evolution of conventional end-point PCR to its real time version further added clinically important features such as enhanced sensitivity and quantification of target DNA molecules. Two important chemistries became prominent in the real-time PCR domain. The intercalating dye-based chemistry comes with convenience, economy and feature such as melt curve analysis but also carries the disadvantage of overestimation of signal due to unwanted signal from primer dimers. Dual labelled probe on the other hand provides unprecedented sensitivity and specificity. Isothermal method of genome nucleic acid amplification has also evolved as a parallel and convenient method of amplification-based detection of nucleic acid targets. Tuberculosis diagnostics has immensely benefitted from these technologies. However, unmet need exists in sputum handling methods and in its adaptation for molecular diagnostics in resource limited settings. Significant dependence for diagnostic needs on the western world is a matter of concern in India. The country will benefit from rapid and indigenous research and development of molecular diagnostic solutions by way of formulating kits for rapid extraction of DNA and RNA from various clinical sources and developing detection technologies that can compete international products in its category. A solution to address sputum transportation, storage and DNA extraction that has enhanced advantages compared to current methods will also be helpful in the efforts to make India free from tuberculosis.

Simple and Multiplexed Detection of Nucleic Acid Targets Based on Fluorescent Ring Patterns and Deep Learning Analysis.

Simple diagnostic tests for nucleic acid targets can provide great advantages for applications such as rapid pathogen detection. Here, we developed a membrane assay for multiplexed detection of nucleic acid targets based on the visualization of two-dimensional fluorescent ring patterns. A droplet of the assay solution is applied to a cellulose nitrate membrane, and upon radial chromatographic flow and evaporation of the solvent, fluorescent patterns appear under UV irradiation. The target nucleic acid is isothermally amplified and is immediately hybridized with fluorescent oligonucleotide probes in a one-pot reaction. We established the fluorescent ring assay integrated with isothermal amplification (iFluor-RFA = isothermal fluorescent ring-based radial flow assay), and feasibility was tested using nucleic acid targets of the receptor binding domain (RBD) and RNA-dependent RNA polymerase (RdRp) genes of SARS-CoV-2. We demonstrate that the iFluor-RFA method is capable of specific and sensitive detection in the subpicomole range, as well as multiplexed detection even in complex solutions. Furthermore, we applied deep learning analysis of the fluorescence images, showing that patterns could be classified as positive or negative and that quantitative amounts of the target could be predicted. The current technique, which is a membrane pattern-based nucleic acid assay combined with deep learning analysis, provides a novel approach in diagnostic platform development that can be versatilely applied for the rapid detection of infectious pathogens.

B-243 Utilizing Lyophilized LAMP Reagents in Rapid Molecular Assays

Abstract Background Loop Mediated Isothermal Amplification (LAMP) has become a widely used method for detection of target nucleic acids (DNA and RNA) as it offers a robust and simple alternative to PCR. LAMP is particularly well suited to point of care (POC) applications such as COVID-19 diagnostics because only a single incubation temperature is required for nucleic acid amplification and the technology is compatible with simple detection strategies, including colorimetric or lateral flow readouts. To further increase the utility of LAMP in POC molecular diagnostic workflows, elimination of cold chain requirements for reagent shipment and storage is desired. In this study, we investigate single and multiplex detection of several viral infectious diseases using lyophilized RT-LAMP reagents. Methods Assays targeting SARS-CoV-2, FluA, FluB and a host control nucleic acid were evaluated using various detection methods with lyophilized RT-LAMP reagents. Compatibility was established with endpoint LAMP detection strategies, such as colorimetric dyes, and real time multiplex LAMP detection, which is increasingly finding utility in POC testing for common respiratory infections that present with similar symptoms. Results Assays employing lyophilized RT-LAMP reagents maintained robust detection of viral respiratory targets within 30 min at 65°C using various detection strategies. Colorimetric dyes such as eriochrome back T and calcein resulted in successful visual readout upon amplification while, one prominent colorimetric dye, hydroxy naphthol blue, was found to be incompatible with the lyophilized reagents used in the study. Additionally, simple hybridization probes permitted simultaneous detection of SARS-CoV-2, FluA and FluB in a single reaction. Conclusion LAMP is a robust, simple, isothermal amplification strategy that continues to enable testing beyond traditional laboratory settings. Lyophilized reagents extend the utility of LAMP in POC settings regardless of the detection strategy and will be important factors in the extension of this powerful molecular diagnostic tool to decentralized, field, and at-home testing applications.

Ultrasensitive detection of nucleic acid based on a novel isothermal amplification

The present study describes a novel technology referred to as reciprocal two single-stranded DNA (ssDNA) probe-mediated isothermal amplification (TPIA) that enables target nucleic acid detection. TPIA extends the ssDNA probe A into ultralong ssDNA products with tandem repeats of hairpin and ssDNA probe B to form double-stranded DNA hairpins of varying lengths via continuously repeated polymerization and displacement. The entire TPIA process was supervised in real time with the assistance of fluorescence techniques. By exploiting this new mechanism, the system can be used as an autocephalous module to provide a versatile tool for a biosensing program. The ssDNA probe B was relationally designed to form a stem-loop structure (HP), which can only unwind through specific recognition by the target nucleic acid. The HP stem region was then exposed and HP was rearranged to serve as the ssDNA probe B in the TPIA system after HP unfolding. The novel design strategy was exploited to specifically assay different target microRNAs (miR-21 and miR-221) with a low limit of detection on the 10 and 1 fM level, respectively. This method has great potential for nucleic acid detection in biomedical research and clinical diagnosis by rationally redesigning the template.

CRISPR/Cas systems for the detection of nucleic acid and non-nucleic acid targets.

Clustered regularly interspaced short palindromic repeats (CRISPR)/CRISPR-associated (Cas) systems are becoming powerful tools for disease biomarkers detection. Due to the specific recognition, cis-cleavage and nonspecific trans-cleavage capabilities, CRISPR/Cas systems have implemented the detection of nucleic acid targets (DNA and RNA) as well as non-nucleic acid targets (e.g., proteins, exosomes, cells, and small molecules). In this review, we first summarize the principles and characteristics of various CRISPR/Cas systems, including CRISPR/Cas9, Cas12, Cas13 and Cas14 systems. Then, various types of applications of CRISPR/Cas systems used in detecting nucleic and non-nucleic acid targets are introduced emphatically. Finally, the prospects and challenges of their applications in biosensing are discussed.

Ultra-low concentration detection of DNA without its amplification using a biological nanopore.

Nanopore sensing is a powerful tool for single-molecule detection. A single molecule is recognized and detected from the information obtained when the target molecule passes through the nanoscale pore by electrophoresis. However, practically it is challenging to measure the target molecules at ultra-low concentrations because it takes a long time for the target molecule to enter the pore. Several elaborate techniques with a biological nanopore, α-hemolysin (αHL), have been proposed to detect the subpicomolar or femtomolar nucleic acids. Wang et al. used a salt gradient between solutions that sandwiched the αHL pore to enhance the electric field and increased the capture frequency of the targets, resulting in the detection of nucleic acid molecules at 0.1 pM. Zhang et al. showed the detection of target nucleic acids at 1 fM using the αHL pore with isothermal amplification of the targets. In contrast, we have recently reported the detection of 0.5 fM nucleic acids without their amplification reaction in the presence of a 500 nM probe complementary binding to the target. The excess amount of the probe relative to the target molecules was assumed to increase the capture frequency of the target/probe duplexes. Here, we attempt to reveal the mechanism of detecting DNA molecules at ultra-low concentrations with the αHL nanopore using probes with complementary sequences to the target molecules. We found that the complementary strand of the target in the probe sequence enhances the capture frequency of the target/probe duplexes by interacting with the target/probe molecules. In addition, higher concentrations of the probe relative to the target molecule (>107-fold) resulted in more frequent capture. This approach potentially advances nanopore technology toward its application in the direct detection of nucleic acid biomarkers at ultra-low levels in body fluids.

Sensitive Small Molecule Aptasensing based on Hybridization Chain Reaction and CRISPR/Cas12a Using a Portable 3D-Printed Visualizer.

Next-generation biosensing tools based on CRISPR/Cas have revolutionized the molecular detection. A number of CRISPR/Cas-based biosensors have been reported for the detection of nucleic acid targets. The establishment of efficient methods for non-nucleic acid target detection would further broaden the scope of this technique, but up to now, the concerning research is limited. In the current study, we reported a versatile biosensing platform for non-nucleic acid small-molecule detection called SMART-Cas12a (small-molecule aptamer regulated test using CRISPR/Cas12a). Simply, hybridization chain reaction cascade signal amplification was first trigged by functional nucleic acid (aptamer) through target binding. Then, the CRISPR/Cas system was integrated to recognize the amplified products followed by activation of the trans-cleavage. As such, the target can be ingeniously converted to nucleic acid signals and then fluorescent signals that can be readily visualized and analyzed by a customized 3D-printed visualizer with the help of a home-made App-enabled smartphone. Adenosine triphosphate was selected as a model target, and under the optimized conditions, we achieved fine analytical performance with a linear range from 0.1 to 750 μM and a detection limit of 1.0 nM. The satisfactory selectivity and recoveries that we have obtained further demonstrated this method to be suitable for a complex sample environment. The sample-to-answer time was less than 100 min. Our work not only expanded the reach of the CRISPR-Cas system in biosensing but also provided a prototype method that can be generalized for detecting a wider range of analytes with desirable adaptability, sensitivity, specificity, and on-site capability.

A facile enzyme-assisted multiple recycling amplification strategy for ultrasensitive fluorescence detection of HIV-1 DNA

We developed an enzyme-assisted multiple signal amplification reaction for target nucleic acid detection. In this strategy, the target nucleic acid as triggers, and in the presence of two specific primers, DNA polymerase and DNA nicking endonuclease act in concert to promote the repetitive cycle DNA replication process, leading to an exponential increase in nucleic acid sequence. Both ends of each sequence of the amplification products and the specific primer could from a unit of Mg2+-DNAzyme which in the presence of cofactor Mg2+ could recognize and cyclically cleave the hairpin probes in the solution and thus realize real-time fluorescence detection of HIV-1 DNA. Under optimal conditions, the detection limit of this method is 10−17 M. The simple in design, isothermal conditions and easy fluorescence measurement of this method exhibits superior sensitivity and specificity, and thus holds great potential to be a promising assay for quantitative detection of DNA or RNA in theoretical and clinic studies.

Rapid detection of SARS-CoV-2: The gradual boom of lateral flow immunoassay.

Severe Acute Respiratory Syndrome Coronavirus 2 (SARS-CoV-2) is still in an epidemic situation, which poses a serious threat to the safety of people and property. Rapid diagnosis and isolation of infected individuals are one of the important methods to control virus transmission. Existing lateral flow immunoassay techniques have the advantages of rapid, sensitive, and easy operation, and some new options have emerged with the continuous development of nanotechnology. Such as lateral flow immunoassay test strips based on colorimetric-fluorescent dual-mode and gold nanoparticles, Surface Enhanced Raman Scattering, etc., these technologies have played an important role in the rapid diagnosis of COVID-19. In this paper, we summarize the current research progress of lateral flow immunoassay in the field of Severe Acute Respiratory Syndrome Coronavirus 2 infection diagnosis, analyze the performance of Severe Acute Respiratory Syndrome Coronavirus 2 lateral flow immunoassay products, review the advantages and limitations of different detection methods and markers, and then explore the competitive CRISPR-based nucleic acid chromatography detection method. This method combines the advantages of gene editing and lateral flow immunoassay and can achieve rapid and highly sensitive lateral flow immunoassay detection of target nucleic acids, which is expected to be the most representative method for community and clinical point-of-care testing. We hope that researchers will be inspired by this review and strive to solve the problems in the design of highly sensitive targets, the selection of detection methods, and the enhancement of CRISPR technology, to truly achieve rapid, sensitive, convenient, and specific detection of novel coronaviruses, thus promoting the development of novel coronavirus diagnosis and contributing our modest contribution to the world's fight against epidemics.

Identification of astrocyte regulators by nucleic acid cytometry.

Multiple sclerosis is a chronic inflammatory disease of the central nervous system1. Astrocytes are heterogeneous glial cells that are resident in the central nervous system and participate in the pathogenesis of multiple sclerosis and its model experimental autoimmune encephalomyelitis2,3. However, few unique surface markers are available for the isolation of astrocyte subsets, preventing their analysis and the identification of candidate therapeutic targets; these limitations are further amplified by the rarity of pathogenic astrocytes. Here, to address these challenges, we developed focused interrogation of cells by nucleic acid detection and sequencing (FIND-seq), a high-throughput microfluidic cytometry method that combines encapsulation of cells in droplets, PCR-based detection of target nucleic acids and droplet sorting to enable in-depth transcriptomic analyses of cells of interest at single-cell resolution. We applied FIND-seq to study the regulation of astrocytes characterized by the splicing-driven activation of the transcription factor XBP1, which promotes disease pathology in multiple sclerosis and experimental autoimmune encephalomyelitis4. Using FIND-seq in combination with conditional-knockout mice, in vivo CRISPR-Cas9-driven genetic perturbation studies and bulk and single-cell RNAsequencing analyses of samples frommouse experimental autoimmune encephalomyelitis and humans with multiple sclerosis, we identified a new role for the nuclear receptor NR3C2 and its corepressor NCOR2 in limiting XBP1-driven pathogenic astrocyte responses. In summary, we used FIND-seq to identify a therapeutically targetable mechanism that limits XBP1-driven pathogenic astrocyte responses. FIND-seq enables the investigation of previously inaccessible cells, including rare cell subsets defined by unique gene expression signatures or other nucleic acid markers.

Amplification Free Detection of SARS-CoV-2 Using Multi-Valent Binding.

We present the development of electrochemical impedance spectroscopy (EIS)-based biosensors for sensitive detection of SARS-CoV-2 RNA using multi-valent binding. By increasing the number of probe-target binding events per target molecule, multi-valent binding is a viable strategy for improving the biosensor performance. As EIS can provide sensitive and label-free measurements of nucleic acid targets during probe-target hybridization, we used multi-valent binding to build EIS biosensors for targeting SARS-CoV-2 RNA. For developing the biosensor, we explored two different approaches including probe combinations that individually bind in a single-valent fashion and the probes that bind in a multi-valent manner on their own. While we found excellent biosensor performance using probe combinations, we also discovered unexpected signal suppression. We explained the signal suppression theoretically using inter- and intra-probe hybridizations which confirmed our experimental findings. With our best probe combination, we achieved a LOD of 182 copies/μL (303 aM) of SARS-CoV-2 RNA and used these for successful evaluation of patient samples for COVID-19 diagnostics. We were also able to show the concept of multi-valent binding with shorter probes in the second approach. Here, a 13-nt-long probe has shown the best performance during SARS-CoV-2 RNA binding. Therefore, multi-valent binding approaches using EIS have high utility for direct detection of nucleic acid targets and for point-of-care diagnostics.

(Invited, Digital Presentation) Rational Design of Nanoplasmonic Array Geometries for Biosensing

Background: Molecular diagnostics provide early and accurate diagnosis, which is essential for the prevention and treatment of infectious as well as chronic diseases. These tests are designed to detect disease-specific bioanalytes such as nucleic acid (DNA or RNA) or protein (antigens, antibodies) biomarkers. In the context of infectious disease diagnosis, nucleic acid-based detection methods are known to provide more specific and sensitive results. Here, the presence of a unique sequence belonging to the pathogenic genomic material is targeted to identify species, organism, genera and/or antimicrobial resistant gene markers. The majority of the common nucleic acid based diagnostic techniques require amplification (polymerase chain reaction, isothermal amplification etc.) of the pathogenic genetic material prior to detection impacting diagnostic speed, complexity, and cost thereby limiting ease of use. Thus, the development of simplified nucleic acid-based diagnostics that can be even used in resource-poor settings may hugely benefit patients across the globe.Nanopath is a molecular diagnostics company utilizing a solid-state nanosensor to enable sequence-specific detection of target nucleic acids without the need of amplification. These nanostructures enable ultra-sensitive biomarker detection using geometric, feature-dependent properties highly dependent on the local dielectric environment, allowing them to be sensitive to low concentration binding events. This paper describes an application of this approach to provide highly relevant clinical information within a single doctor’s office visit. Introduction: The Nanopath team is in collaboration with NASA (National Aeronautics and Space Administration) and NIST (National Institute of Standards and Technology) to push the bounds of the fundamental physics associated with their biosensing platform. The ability of metals to support electromagnetic surface waves gives rise to surface plasmons when optically illuminated. This property, and its strong sensitivity to changes in the local refractive index, allows for the use of metal nanoparticles as ultra-sensitive transducers. In prior work by members of this team, ensembles of randomly oriented nanoparticles (i.e., colloidal nanorods dispersed on chip) were employed for sequence-specific nucleic acid sensing (1-3). While these particle sensors have the advantage of rapid fabrication, they suffer from low sensitivity and quality factor due to the random particle dispersity. In contrast, in this study we employ ordered array nanoparticle ensembles which can be used to improve sensor sensitivity and figure-of-merit. Study Methods Overview: In this talk, we detail the results of sensing experiments and computational simulations to outline a rational design of the structure of these plasmonic nanoparticle arrays for biomolecular sensing. Through simulation and experiment, we iteratively tailor nanostructure dimension to provide high quality signal and large resonance shifts upon modeled nucleic acid binding.In particular, full-wave electromagnetic simulations were conducted using Lumerical photonic simulation software in which periodic boundary conditions were applied in the x- and y- dimensions for each of the nanoplasmonic sensor geometries. To simulate the resonance response to changes in the bulk solution in contact with the sensor surface, the refractive index of the surrounding media was changed appropriately. Nucleic acid hybridization events were modeled using either using spherical structures approximating the relevant radius of genomic material as estimated by polymer models, or as conformal layers with the known refractive indices for nucleic acids. On the basis of initial simulations, nanosensors were fabricated using traditional electron-beam lithography protocols at NIST. To evaluate consensus between simulations and experiments, bulk sensing experiments were carried out in which the resonance peaks were obtained by submerging the sensors in refractive index standards. Key nanosensor characteristics including resonance peak locations, resonance peak shifts as a function of refractive index, and figure of merit (FOM) of extinction curves were examined between the experimental and simulation results prior to proceeding with simulations on additional geometries and more complex solution conditions, and further device fabrication. This iterative process is repeated toward a rational design of nanoplasmonic array geometries for biosensing optimizing response for targeted disease detection.In summary, this study puts forth a methodology for rational design and characterization of regularly spaced nanoparticle arrays for optics-based biosensing. The results of this study will allow for more informed design of nanostructure geometries towards sequence-specific nucleic acid detection. These improved designs have the potential to improve clinical sensitivity and limit-of-detection across disease indication.

Novel and sensitive electrochemical/fluorescent dual-mode biosensing platform based on the cascaded cyclic amplification of enzyme-free DDSA and functional nucleic acids

Herein, we present a novel electrochemical (EC)/fluorescent (FL) dual-mode biosensor for sensitive and accurate detection of target nucleic acids, which was based on the functional nucleic acids-involved enzyme-free dynamic DNA self-assembly of catalytic hairpin assembly (CHA) and hybridization chain reaction (HCR) for cascaded cyclic amplification. Originally, the CHA reaction of three well-designed hairpin probes were initiated by target sequence, forming abundant Mg2+-dependent three-way DNAzyme junctions (MTWDJ) which could recognize and cleave the methylene blue-labeled substrate hairpin (MB-Hs) to generate the MB-labeled fragments s1 (MB-s1) and the HCR initiator s2. Then, s2 triggered the HCR of four hairpins to produce long DNA nanowires which contained numerous G-quadruplex sequences and the same Mg2+-dependent DNAzyme (MNAzyme) sequences as MTWDJ. Therefore, the HCR copolymer could not only emerge the fluorescent signals through combining thioflavin T with G-quadruplex, but also generate MB-s1 and s2 via MNAzyme cleavage of MB-Hs to continue initiating the HCR. Meanwhile, MB-s1, the cleavage product of MTWDJ and MNAzyme, was captured on the DNA tetrahedron nanostructure modified electrode surface to bring electrochemical signals. Benefiting from integrating the efficient cyclic cleavage of MTWDJ and MNAzyme, the concatenated CHA and HCR amplification circuit, and the dual-mode detection, the sensitivity and accuracy of this biosensor were significantly improved. Under the optimal conditions, the proposed EC/FL dual-mode sensing strategy exhibited a superior analytical performance toward target nucleic acids, showing the promising application in bioanalysis and early disease diagnosis.

Controlled Rehydration of Dried Reagents for Robust Multiplex Digital PCR.

Digital polymerase chain reaction (dPCR) is emerging as a powerful method for nucleic acid detection due to its unprecedented sensitivity and precision. However, most current dPCR platforms are inherently limited by their low multiplexing ability due to primer-pair cross interactions and spectral overlap of available fluorophores. Here, we present a novel and robust method for multiplexing dPCR that is free from primer dimerization and fluorescence channel number limitation, enabling highly precise and multiplexed detection of nucleic acid targets. By prestoring target-specific primers and probes in different storage chambers, the method physically separates reactions and thus avoids the primer-pair cross interactions and spectral overlap of different fluorescent probes that usually occur within a single-tube reaction. Furthermore, a dissolvable delay valve (DDV) is embedded between each pair of the reagent prestorage chamber and reaction microwell array. Such a DDV configuration allows full reconstitution of the prestored reagents and then generates a uniform concentration distribution of the reconstituted reagents across the entire reaction microwell array, which is favorable for achieving reliable and robust multiplex dPCR assays. We demonstrated the feasibility of this method by performing an eight-plex dPCR assay targeting the seven most common point mutations in Kirsten rat sarcoma viral oncogene homologue (KRAS) and a reference sequence (wild-type KRAS allele).

Magnetic Control-Enhanced Lateral Flow Technique for Ultrasensitive Nucleic Acid Target Detection.

In this work, a lateral flow (LF)-based detection strategy termed magnetic control-enhanced LFA (MCLF) was proposed to detect nucleic acid sequences at attomolar sensitivity. In the proposed MCLF method, magnetic controllers which are magnetic nanoparticles modified with antibodies against the labels on capture sequences were used to interact with the unreacted labeled capture sequence (CS-label) to improve the detection limit. By regulating the movement of magnetic probes (magnetic controllers) with a simple magnet under the lateral flow strip, the movement of magnetic probes bounded with unreacted CS-label in the sample flow could be reduced. Therefore, the target sequence-containing sandwich structures will arrive at the test zone prior, to interact with the recognition ligands, whereby the capture efficiency of the sandwich structures could be increased because the unreacted capture sequences at the test zone will be reduced. With the colorimetric signal from gold nanoparticle-based probes, the proposed MCLF technique could recognize as low as 100 aM of DNA target sequences by naked eyes, and the responding range of MCLF is from 100 aM to 10 pM.