Detection Of Protease Activity Research Articles

Rapid and accurate quantification of trypsin activity using integrated infrared and ultraviolet spectroscopy with data fusion techniques

Proteases play a crucial role in industrial enzyme formulations, with activity fluctuations significantly impacting product quality and yield. Therefore, developing a method for precise and rapid detection of protease activity is paramount. This study aimed to develop a rapid and accurate method for quantifying trypsin activity using integrated infrared (IR) and ultraviolet (UV) spectroscopy combined with data fusion techniques. The developed method evaluates the enzymatic activity of trypsin under varying conditions, including temperature, pH, and ionic strength. By comparing different data fusion methods, the study identifies the optimal model for accurate enzyme activity prediction. The results demonstrated significant improvements in predictive performance using the feature-level data fusion approach. Additionally, substituting the spectral data of the samples in the validation sets into the best prediction model resulted in a minimal residual difference between predicted and true values, further verifying the model's accuracy and reliability. This innovative approach offers a practical solution for the efficient and precise quantification of enzyme activity, with broad applications in industrial processes.

Synthetic protein protease sensor platform.

Introduction: Protease activity can serve as a highly specific biomarker for application in health, biotech, and beyond. The aim of this study was to develop a protease cleavable synthetic protein platform to detect protease activity in a rapid cell-free setting. Methods: The protease sensor is modular, with orthogonal peptide tags at the N and C terminal ends, which can be uncoupled via a protease responsive module located in between. The sensor design allows for several different readouts of cleavage signal. A protein 'backbone' [Green fluorescent protein (GFP)] was designed in silico to have both a C-terminal Flag-tag and N-Terminal 6x histidine tag (HIS) for antibody detection. A protease cleavage site, which can be adapted for any known protease cleavage sequence, enables the uncoupling of the peptide tags. Three different proteases-Tobacco, Etch Virus (TEV), the main protease from coronavirus SARS-COV-2 (Mpro) and Matrix Metallopeptidase 9 (MMP9)-a cancer-selective human protease-were examined. A sandwich Enzyme-Linked Immunosorbent Assay (ELISA) was developed based on antibodies against the HIS and Flag tags. As an alternative readout, a C-terminal quencher peptide separable by protease cleavage from the GFP was also included. Purified proteins were deployed in cell-free cleavage assays with their respective protease. Western blots, fluorescence assays and immunoassay were performed on samples. Results: Following the design, build and validation of protein constructs, specific protease cleavage was initially demonstrated by Western blot. The novel ELISA proved to afford highly sensitive detection of protease activity in all cases. By way of alternative readout, activation of fluorescence signal upon protease cleavage was also demonstrated but did not match the sensitivity provided by the ELISA method. Discussion: This platform, comprising a protease-responsive synthetic protein device and accompanying readout, is suitable for future deployment in a rapid, low-cost, lateral flow setting. The modular protein device can readily accommodate any desired protease-response module (target protease cleavage site). This study validates the concept with three disparate proteases and applications-human infectious disease, cancer and agricultural crop infection.

Purification, characterization, and cloning of a novel pro-inflammatory secreted protein from Staphylococcus aureus.

Staphylococcus aureus causes a myriad of human diseases, ranging from relatively mild soft tissue infections to highly fatal pneumonia, sepsis, and toxic shock syndrome. The organisms primarily cause diseases across mucosal and skin barriers. In order to facilitate penetration of barriers, S. aureus causes harmful inflammation by inducing chemokines from epithelial cells. We report the cloning and characterization of a novel secreted S. aureus protein that induces chemokine production from epithelial cells as its major demonstrable function. This secreted protein possibly helps S. aureus and its secreted proteins to penetrate host barriers.

Next Generation of Fluorometric Protease Assays: 7-Nitrobenz-2-oxa-1,3-diazol-4-yl-amides (NBD-Amides) as Class-Spanning Protease Substrates.

Fluorometric assays are one of the most frequently used methods in medicinal chemistry. Over the last 50 years, the reporter molecules for the detection of protease activity have evolved from first-generation colorimetric p-nitroanilides, through FRET substrates, and 7-amino-4-methyl coumarin (AMC)-based substrates. The aim of further substrate development is to increase sensitivity and reduce vulnerability to assay interferences. Herein, we describe a new generation of substrates for protease assays based on 7-nitrobenz-2-oxa-1,3-diazol-4-yl-amides (NBD-amides). In this study, we synthesized and tested substrates for 10 different proteases from the serine-, cysteine-, and metalloprotease classes. Enzyme- and substrate-specific parameters as well as the inhibitory activity of literature-known inhibitors confirmed their suitability for application in fluorometric assays. Hence, we were able to present NBD-based alternatives for common protease substrates. In conclusion, these NBD substrates are not only less susceptible to common assay interference, but they are also able to replace FRET-based substrates with the requirement of a prime site amino acid residue.

Biosensor Optimization Using a Förster Resonance Energy Transfer Pair Based on mScarlet Red Fluorescent Protein and an mScarlet-Derived Green Fluorescent Protein.

Genetically encoded biosensors based on Förster resonance energy transfer (FRET) are indispensable tools for monitoring biochemical changes in cells. Green and red fluorescent protein-based FRET pairs offer advantages over the classically employed cyan and yellow fluorescent protein pairs, such as better spectral separation, lower phototoxicity, and less autofluorescence. Here, we describe the development of an mScarlet-derived green fluorescent protein (designated as mWatermelon) and its use as a FRET donor to the red fluorescent protein mScarlet-I as a FRET acceptor. We tested the functionality of this FRET pair by engineering biosensors for the detection of protease activity, Ca2+, and K+. Furthermore, we described a strategy to enhance the FRET efficiency of these biosensors by modulating the intramolecular association between mWatermelon and mScarlet-I.

Modular Peroxidase-Based Reporters for Detecting Protease Activity and Protein Interactions with Temporal Gating.

Enzymatic reporters have been widely applied to study various biological processes because they can amplify signal through enzymatic reactions and provide good sensitivity. However, there is still a need for modular motifs for designing a series of enzymatic reporters. Here, we report a modular peroxidase-based motif, named CLAPon, that features acid-base coil-caged enhanced ascorbate peroxidase (APEX). We demonstrate the modularity of CLAPon by designing a series of reporters for detecting protease activity and protein-protein interactions (PPIs). CLAPon for protease activity showed a 390-fold fluorescent signal increase upon tobacco etch virus protease cleavage. CLAPon for PPI detection (PPI-CLAPon) has two variants, PPI-CLAPon1.0 and 1.1. PPI-CLAPon1.0 showed a signal-to-noise ratio (SNR) of up to 107 for high-affinity PPI pairs and enabled imaging with sub-cellular spatial resolution. However, the more sensitive PPI-CLAPon1.1 is required for detecting low-affinity PPI pairs. PPI-CLAPon1.0 was further engineered to a reporter with light-dependent temporal gating, called LiPPI-CLAPon1.0, which can detect a 3-min calcium-dependent PPI with an SNR of 17. LiPPI-CLAPon enables PPI detection within a specific time window with rapid APEX activation and diverse readout. Lastly, PPI-CLAPon1.0 was designed to have chemical gating, providing more versatility to complement the LiPPI-CLAPon. These CLAPon-based reporter designs can be broadly applied to study various signaling processes that involve protease activity and PPIs and provide a versatile platform to design various genetically encoded reporters.

Purification of RgpA from external outer membrane vesicles of Porphyromonas gingivalis

IntroductionPurification of native gingipains is challenging because these proteases are frequently associated with the cell surface, which affects yield. This study aimed to purify native Arg-gingipain (RgpA) from Porphyromonas gingivalis Outer Membrane Vesicles (OMV). MethodsNative RgpA was purified from P. gingivalis strain ATCC33277 OMV using a strategy including ultracentrifugation, sonication, and successive anionic and cationic fast protein liquid chromatography (FPLC). The presence and purity of the protease were confirmed by SDS-PAGE and detection of protease activity using fluorogenic substrates. Rat antibodies produced against the unique adhesin hemagglutinin (H1) domain of RgpA (amino acids 719–865) were titrated by ELISA at a 1:100 dilution using whole P. gingivalis lysate as an antigen and western blotting to detect a 75 kDa band corresponding to RgpA. ResultsDouble anionic-cationic FLPC yielded prominent peaks with evident amidolytic gingipain activity of the appropriate molecular weight, as confirmed by western blotting. The final RgpA yield from 1 L of bacterial culture with colony forming unit (CFU) (Log10) 7.4 ± 0.08/mL was of 12.6% (2 mg/mL), with 3.2 FU/μg of amidolytic activity. ConclusionsThis protocol allows purification of native RgpA from OMV that retains protease activity.

A Modular Fluorescent Sensor Motif Used to Detect Opioids, Protein-Protein Interactions, and Protease Activity.

Modular fluorescent sensor motifs are needed to design fluorescent sensors for detecting various cellular processes and functional molecules. Here, we took advantage of the versatility of a new sensor motif to design a series of sensors called SPOTon. SPOTon sensors integrate the signal from either opioids, protein-protein interactions, or protease activities to generate persistent green fluorescence. We demonstrate that SPOTon can be engineered with temporal gating to allow detection of these cellular events during a user-defined time window, providing temporal information about cellular processes and functional molecule release. These SPOTon sensors all show a high signal-to-noise ratio, up to 38 for chemical gated opioid detection, 147 for chemical gated protein-protein interaction detection, and 85 for protease activity detection.

(Invited, Digital Presentation) Development of Multiplex Electrode Array Sensors for Proteases Activity Profiling Toward Cancer Diagnosis

Proteases are a large family of enzymes involved in many important biological processes. Quantitative detection of the activity profile of specific target proteases is in high demand for the diagnosis and treatment monitoring of diseases such as cancers. The overexpression and enhanced activity of proteases were found to correlate well with cancer development. Protease inhibitors are also a class of major anti-cancer drug candidates. However, due to the presence of a large number (over 600) of proteases in human body, their complex interactions with each other, and large influence by the surrounding factors (such as buffer composition, pH value and temperature), it is challenging to accurately detect the activity of specific proteases in complex media. It is even more difficult to measure the activity profiles of a large set of proteases that are relevant to cancers. Here we summarize our studies on the development of a multiplex electrode array biosensor platform toward cancer diagnosis based on rapid profiling of multiple protease activities. Both nano- and micro-electrode arrays have been demonstrated for electrochemical detection of protease activities. The individually addressed 3x3 gold thin-film microelectrode array is particularly attractive for rapid profiling of multiple protease activities.The general sensor scheme involves attaching short peptides with specific sequences of 4 to 8 amino acids on the electrode surface of the electrochemical sensor chip, which serve as the substrates for selective proteolysis by the cognate proteases. The far end is covalently attached with a ferrocene (Fc) group as the redox tag for electrochemical measurements. The quantity of the intact peptides on the electrode surface is measured with an AC voltammetry (ACV) method, which is proportional to the peak current at the specific electrode potential when Fc oxidation is oxidized into ferrocenium (Fc+). As the peptide is cleaved by the cognate protease, the peak current decreases continuously in the continuously repeated ACV curves. The recorded kinetic proteolytic curve can be quantitatively described by the heterogeneous Michaelis-Menten model following an exponential decay. The inverse of exponential decay time constant, i.e., 1/τ, is found to represent the protease activity which equals to [E](kcat /KM), where [E] is the protease concentration and kcat /KM is the specificity constant defined by the kinetic proteolytic reaction constant kcat and the Michaelis equilibrium constant KM. The kcat /KM values have been investigated versus the substrate peptide sequence and length, temperature, and buffer composition to optimize the detection for activity of cathepsin B, a potential cancer biomarker. The limit of detection (LOD) for activated cathepsin B can reach down to 0.57 pM, sufficient to directly detect cathepsin B in diluted human serum.This electrochemical method has been compared and validated with the commonly used affinity assay, i.e., enzyme-linked immunosorbent assay (ELISA). The ELISA measurements were found to be more sensitive to the concentration of proenzyme (zymogen), while the electrochemical method detects the activity of the proteases which reflects the intrinsic biological function. This provides more critical information than the concentration derived from ELISA.Currently, two sets of peptides have been synthesized which are selective for detection of cathepsin B and ADAM-17, respectively. They are functionalized to the 3x3 gold thin-film microelectrode array and used to simultaneously detect these two types of proteases in serum samples from breast cancer patients at different stages. The activity profiles will be correlated to the cancer development. Figure 1

Detection of gingipain activity using solid state nanopore sensors

Accurate, robust, and rapid diagnostics is the basis for all well-functioning healthcare. There is a large need in point-of-care biosensors to facilitate diagnosis and reduce the need for cumbersome laboratory equipment. Proteases are key virulence factors in periodontitis. Periodontal disease is very common and characterized by inflammation and infection in the tooth-supporting structures and is linked to many systemic diseases such as cardiovascular disease, diabetes, and Alzheimer’s disease. Proteases present in periodontal disease, gingipains, are highly responsible for the disease onset and progression and are therefore a promising biomarker. Here we show a novel nanopore-based biosensor strategy for protease activity monitoring. Solid-state nanopores were modified with a proteolytic substrate, restricting the ionic current through the apertures of the nanopores. Protease can digest the proteolytic substrate thus enlarge the aperture and the ionic current. Trypsin was used as an initial model protease to investigate the performance of the sensor. We show that the solid-state nanopore-biosensor can detect trypsin with a limit of detection (LOD) of 0.005 ng/mL (0.2 pM). The detection system developed for the model enzyme was then applied to the detection of gingipains. The LOD for detection of gingipains was 1 ng/mL (0.02 nM), with a 27% recovery of the signal at 0.1 µg/mL, indicating that the sensitivity and dynamic range are relevant for the clinical diagnosis of periodontitis. The generic detection of protease activity and high sensitivity make this a promising sensor technology for both diagnosis of periodontal disease and monitoring of other disease-related proteases.

A General, Label-Free and Homogeneous Electrochemical Strategy for Probing of Protease Activity and Screening of Inhibitor.

Proteases play a critical role in regulating various physiological processes from protein digestion to wound healing. Monitoring the activity of proteases and screening their inhibitors as potential drug molecules are of great importance for the early diagnosis and treatment of many diseases. In this work, we reported a general, label-free and homogeneous electrochemical method for monitoring protease activity based on the peptide–copper interaction. Cleavage of peptide substrate results in the generation of a copper-binding chelator peptide with a histidine residue in the first or third position (His1 or His3) at the N-terminal. The redox potential and current of copper coordinated with the product are different from the free copper or the copper complex with the substrate, thus allowing for the detection of protease activity. Angiotensin-converting enzyme (ACE) and thrombin were determined as the model analytes. The label-free and homogeneous electrochemical method can be used for screening protease inhibitors with high simplicity and sensitivity.

Simultaneous Evaluations of pH and Enzyme Activity with a CEST MRI Contrast Agent.

The extracellular tumor microenvironment of many solid tumors has high acidosis and high protease activity. Simultaneously assessing both characteristics may improve diagnostic evaluations of aggressive tumors and the effects of anticancer treatments. Noninvasive imaging methods have previously been developed that measure extracellular pH or can detect enzyme activity using chemical exchange saturation transfer (CEST) magnetic resonance imaging (MRI). Herein, we developed a single-hybrid CEST agent that can simultaneously measure pH and evaluate protease activity using a combination of dual-power acidoCEST MRI and catalyCEST MRI. Our agent showed CEST signals at 9.2 ppm from a salicylic acid moiety and at 5.0 ppm from an aryl amide. The CEST signal at 9.2 ppm could be measured after selective saturation was applied at 1 and 4 μT, and these measurements could be used with a ratiometric analysis to determine pH. The CEST signal at 5.0 ppm from the aryl amide disappeared after the agent was treated with cathepsin B, while the CEST signal at 9.2 ppm remained, indicating that the agent could detect protease activity through the amide bond cleavage. Michaelis-Menten kinetics studies with catalyCEST MRI demonstrated that the binding affinity (as shown with the Michaelis constant KM), the catalytic turnover rate (kcat), and catalytic efficiency (kcat/KM) were each higher for cathepsin B at lower pH. The kcat rates measured with catalyCEST MRI were lower than the comparable rates measured with liquid chromatography-mass spectrometry (LC-MS), which reflected a limitation of inherently noisy and relatively insensitive CEST MRI analyses. Although this level of precision limited catalyCEST MRI to semiquantitative evaluations, these semiquantitative assessments of high and low protease activity still had value by demonstrating that high acidosis and high protease activity can be used as synergistic, multiparametric biomarkers.

A novel assay for the determination of PreScission protease by capillary electrophoresis

The detection of protease activity in the body plays a significant role in the early diagnosis of diseases. However, enzymes inevitably come into contact with various complex biological fluids in the body during the flow, which greatly increases the detection difficulty. Therefore, protease detection in vivo has great challenges. Herein, we report a new assay for detecting protease using capillary electrophoresis inside a capillary with semicircular bends. We first designed a peptide substrate, and then the peptide was self-assembled with quantum dots to form a QDs-peptide substrate. The capillary was bent to semicircular-shaped turns and served as a micro-reactor to allow protease and substrate react in it. Due to the different electrophoretic velocity, the protease and the substrate were mixed inside the bent capillary with sequential injections and the cleavage of the substrate can be detected using capillary electrophoresis combined with Förster resonance energy transfer technology. This novel assay will greatly expand the detection of enzyme activity in vivo.

Development of a Fluorescent Protein Based FRET Biosensor for Determination of Protease Activity

Proteases are closely associated with many pathological conditions. Efficient detection of protease activity may be useful for diagnosis, prognosis, and the development of new therapeutic biomolecules. Fluorescent Resonance Energy Transfer (FRET) is defined as the non-radioactive energy transfer that occurs between two fluorophores. Fluorescent proteins are widely used in FRET biosensors because they can be genetically encoded and compatible with cells. Fluorescent Protein based FRET (FP-FRET) biosensors are used to monitor biological processes such as enzyme activity, intracellular ion concentration, conformational changes, protein-protein interactions. In this study, it was aimed to detect protease activity using an FP-FRET biosensor and TEV protease was chosen as a model enzyme. The plasmid encoding the mNeonGreen-mRuby3 fluorescent protein-based FRET biosensor was constructed. The gene of the designed FP-FRET biosensor was expressed in Escherichia coli DH5α cells using recombinant DNA techniques and purified using Ni-NTA affinity chromatography. As a result, the activity of the TEV protease enzyme was determined by emission measurements performed in the spectrofluorometer using the produced FP-FRET biosensor. The usability of the designed FP-FRET biosensor in the determination of protease enzyme activity was demonstrated.

(Invited) Toward Rapid Profiling of Proteases Activities for Cancer Diagnosis Based on Multiplex Microelectrode Array Sensors

We report the development of an electrochemical biosensor platform based on multiplex micro-/nano- electrode arrays toward cancer diagnosis based on rapid profiling of protease activities. Proteases are a large family of enzymes involved in many important biological processes. Quantitative detection of the activity profile of specific target proteases is in high demand for the diagnosis and treatment monitoring of diseases such as cancers. This study demonstrates the fabrication and characterization of a nanoelectrode array platform based on embedded vertically aligned carbon nanofibers for electrochemical detection of protease activities and further development into an individually addressed 3x3 gold thin-film microelectrode array for rapid profiling of multiple protease activities.Peptides with specific sequences of 4 to 8 amino acids are designed and synthesized as the substrates for selective proteolysis by the cognate proteases, which are attached to the electrode surface as the specific probes. The far end is covalently attached with a ferrocene (Fc) group as the redox moiety for electrochemical measurements. The quantity of the intact peptides on the electrode surface can be sensitively detected with an AC voltammetry method and presents as the peak current at the specific potential for Fc oxidation into ferrocenium (Fc+). As the peptide is cleaved by the cognate protease, the peak current decreases exponentially in the continuously repeated AC voltammetry measurements. The recorded kinetic proteolytic curve can be quantitatively described by a surface-based heterogeneous Michaelis-Menten model. The inverse of exponential decay time constant, 1/t, is found to represent the protease activity which equals to [E](kcat /KM), where [E] is the protease concentration and kcat /KM is the specificity constant defined by the kinetic proteolytic reaction constant kcat and the Michaelis equilibrium constant KM. We have systematically investigated the factors that affect the value of kcat /KM, including the peptide sequence, peptide length, temperature and buffer composition, and optimized the conditions for highly sensitive detection of protease activity of cathepsin B, a potential cancer biomarker.Toward rapid profiling of multiple proteases, we have developed a multiplex electrochemical sensor chip based on a 3x3 gold microelectrode array. The nine individual gold microelectrodes are partially buried underneath the surrounding SiO2 thin film, which show highly consistent cyclic voltammetric signals in gold surface cleaning experiments and detecting benchmark redox species in solution. Upon selectively functionalizing the individual gold microelectrodes with the specific ferrocene-labeled peptide probes, simultaneous detection of the proteolytic curves of the target proteases can be obtained over 9 channels by monitoring the decay of the AC voltammetry signal of the ferrocene-labeled peptide molecules. So far, the algorithm for fitting the kinetic proteolytic curves to accurately derive the activity of cathepsin B has been established. Simultaneous detection of the proteolysis of cathepsin B on the microelectrode array functionalized with three different hexapeptides has been demonstrated, showing the potential of this sensor platform for rapid detection of the activity profiles of multiple proteases.Interestingly, the above-discussed electrochemical method detects the activity of the proteases, which reflects the true biological function and is fundamentally different from the concentration derived from commonly used affinity biosensors or assays such as enzyme-linked immunosorbent assay (ELISA). The direct comparison has shown that ELISA measurements will give the same results no matter the original proenzyme form (zymogen) in the sample is activated or not, while the electrochemically measured activity shows dramatic increase after being chemically activated. In addition, in the current practice, each protease is measured separately in its optimal buffer with the pH value varying from 5 to 9. It is not possible to measure them in a common buffer simultaneously. We have demonstrated that the electrochemical method can be applied for protease activity profiling in a buffer at pH = 7.4 that is compatible to the physiology conditions. This enables measuring the activity of multiple proteases in human serum, which is a critical step toward protease activity for cancer diagnosis.The figure shows the optical images of (a) the whole 3x3 Au microelectrode array chip and (b) the active electrode area, and the schematic illustration of (c) the mechanism of proteolysis of the peptide probes, (d) the change of the AC voltammetry signal before and after proteolysis and (e) the kinetic proteolytic curves, i.e. the exponential peak current decay over time, at different protease concentration [E]. Figure 1

Near-Infrared Fluorescent Probes for the Detection of Cancer-Associated Proteases.

Proteases are enzymes capable of catalyzing protein breakdown, which is critical across many biological processes. There are several families of proteases, each of which perform key functions through the degradation of specific proteins. As our understanding of cancer improves, it has been demonstrated that several proteases can be overactivated during the progression of cancer and contribute to malignancy. Optical imaging systems that employ near-infrared (NIR) fluorescent probes to detect protease activity offer clinical promise, both for early detection of cancer as well as for the assessment of personalized therapy. In this Review, we review the design of NIR probes and their successful application for the detection of different cancer-associated proteases.

Activatable Carbocyanine Dimers for Photoacoustic and Fluorescent Detection of Protease Activity.

Activatable contrast agents are of ongoing research interest because they offer low background and high specificity to the imaging target. Engineered sensitivity to protease activity is particularly desirable because proteases are critical biomarkers in cancer, infectious disease, inflammatory disorders, and so forth. Herein, we developed and characterized a set of peptide-linked cyanine conjugates for dual-modal detection of protease activity via photoacoustic (PA) and fluorescence imaging. The peptide-dye conjugates were designed to undergo contact quenching via intramolecular dimerization and contained n dyes (n = 2, 3, or 4) with n - 1 cleavable peptide substrates. The absorption peaks of the conjugates were blue-shifted 50 nm relative to the free dye and had quenched fluorescence. This effect was sensitive to solvent polarity and could be reversed by solvent switching from water to dimethyl sulfoxide. Employing trypsin as a model protease, we observed a 2.5-fold recovery of the peak absorbance, 330-4600-fold fluorescent enhancement, and picomolar detection limits following proteolysis. The dimer probe was further characterized for PA activation. Proteolysis released single dye-peptide fragments that produced a 5-fold PA enhancement through the increased absorption at 680 nm with nanomolar sensitivity to trypsin. The peptide substrate could also be tuned for protease selectivity; as a proof-of-concept, we detected the main protease (Mpro) associated with the viral replication in SARS-CoV-2 infection. Last, the activated probe was imaged subcutaneously in mice and signal was linearly correlated to the cleaved probe. Overall, these results demonstrate a tunable scaffold for the PA molecular imaging of protease activity with potential value in areas such as disease monitoring, tumor imaging, intraoperative imaging, in vitro diagnostics, and point-of-care sensing.

Monitoring Neutrophil Elastase and Cathepsin G Activity in Human Sputum Samples

Proteases are regulators of countless physiological processes and the precise investigation of their activities remains an intriguing biomedical challenge. Among the ~600 proteases encoded by the human genome, neutrophil serine proteases (NSPs) are thoroughly investigated for their involvement in the onset and progression of inflammatory conditions including respiratory diseases. Uniquely, secreted NSPs not only diffuse within extracellular fluids but also localize to plasma membranes. During neutrophil extracellular trap (NETs) formation, NSPs become an integral part of the secreted chromatin. Such complex behavior renders the understanding of NSPs pathophysiology a challenging task. Here, detailed protocols are shown to visualize, quantify and discriminate free and membrane-bound neutrophil elastase (NE) and cathepsin G (CG) activities in sputum samples. NE and CG are NSPs whose activities have pleiotropic roles in the pathogenesis of cystic fibrosis (CF) and chronic obstructive pulmonary disease (COPD): they promote tissue remodeling, regulate downstream immune responses and correlate with lung disease severity. The protocols show how to separate fluid and cellular fraction, as well as the isolation of neutrophils from human sputum for enzymatic activity quantification via small-molecule Förster resonance energy transfer-based (FRET) reporters. To gather specific insights into the relative role of NE and CG activities, a FRET readout can be measured by different technologies: i) in vitro plate reader measurements allow for high-throughput and bulk detection of protease activity; ii) confocal microscopy spatiotemporally resolves membrane-bound activity at the cell surface; iii) small-molecule FRET flow cytometry enables for the rapid evaluation of anti-inflammatory treatments via single-cell protease activity quantification and phenotyping. The implementation of such methods opens the doors to explore NSPs pathobiology and their potential as biomarkers of disease severity for CF and COPD. Given their standardization potential, their robust readout and simplicity of transfer, the described techniques are immediately shareable for implementation across research and diagnostic laboratories.

Monitoring Neutrophil Elastase and Cathepsin G Activity in Human Sputum Samples.

Proteases are regulators of countless physiological processes and the precise investigation of their activities remains an intriguing biomedical challenge. Among the ~600 proteases encoded by the human genome, neutrophil serine proteases (NSPs) are thoroughly investigated for their involvement in the onset and progression of inflammatory conditions including respiratory diseases. Uniquely, secreted NSPs not only diffuse within extracellular fluids but also localize to plasma membranes. During neutrophil extracellular trap (NETs) formation, NSPs become an integral part of the secreted chromatin. Such complex behavior renders the understanding of NSPs pathophysiology a challenging task. Here, detailed protocols are shown to visualize, quantify and discriminate free and membrane-bound neutrophil elastase (NE) and cathepsin G (CG) activities in sputum samples. NE and CG are NSPs whose activities have pleiotropic roles in the pathogenesis of cystic fibrosis (CF) and chronic obstructive pulmonary disease (COPD): they promote tissue remodeling, regulate downstream immune responses and correlate with lung disease severity. The protocols show how to separate fluid and cellular fraction, as well as the isolation of neutrophils from human sputum for enzymatic activity quantification via small-molecule Förster resonance energy transfer-based (FRET) reporters. To gather specific insights into the relative role of NE and CG activities, a FRET readout can be measured by different technologies: i) in vitro plate reader measurements allow for high-throughput and bulk detection of protease activity; ii) confocal microscopy spatiotemporally resolves membrane-bound activity at the cell surface; iii) small-molecule FRET flow cytometry enables for the rapid evaluation of anti-inflammatory treatments via single-cell protease activity quantification and phenotyping. The implementation of such methods opens the doors to explore NSPs pathobiology and their potential as biomarkers of disease severity for CF and COPD. Given their standardization potential, their robust readout and simplicity of transfer, the described techniques are immediately shareable for implementation across research and diagnostic laboratories.

Novel Method for the Quantitative Analysis of Protease Activity: The Casein Plate Method and Its Applications.

No simple methods are used for the quantitative analysis of the protease activity in colored food up till now. Thus, this study aims to establish a new and simple method for the quantitative detection of protease activity, especially in colored food. The detection accuracy, detection limit, and repeatability of the casein plate method were analyzed. Then, the application of the casein plate method in sample detection and recovery was further evaluated. The results showed that the casein plate method for the quantitative detection of protease activity has high accuracy, high precision, and low detection limit. The recoveries of eight kinds of colored samples were in the range of 92.26–97.84%, and the relative standard deviation (RSD) was in the range of 3.56–10.88%. The results of the casein plate method exhibited high accuracy. This indicated that the method was suitable for the detection of colored samples. The casein plate method for the quantitative detection of protease activity is simple. The newly constructed casein plate method has broad potential application value in food industry, especially for the detection of dark food.