Design Of Ultra-wideband Antenna Research Articles

A compact tri-notched flexible UWB antenna based on an inkjet-printable and plasma-activated silver nano ink

The rapid development of ultrawideband (UWB) communication systems has resulted in increasing performance requirements for the antenna system. In addition to a wide bandwidth, fast propagation rates and compact dimensions, flexibility, wearability or portability are also desirable for UWB antennas, as are excellent notch characteristics. Although progress has been made in the development of flexible/wearable antennas desired notch properties are still rather limited. Moreover, most presently available flexible UWB antennas are fabricated using environmentally not attractive subtractive etching-based processes. The usage of facile additive sustainably inkjet printing processes also utilizing low temperature plasma-activated conductive inks is rarely reported. In addition, the currently used tri-notched flexible UWB antenna designs have a relatively large footprint, which poses difficulties when integrated into miniaturized and compact communication devices. In this work, a silver nano ink is used to fabricate the antenna via inkjet printing and an efficient plasma sintering procedure. For the targeted UWB applications miniaturized tri-notched flexible antenna is realized on a flexible polyethylene terephthalate (PET) substrate with a compact size of 17.6 mm × 16 mm × 0.12 mm. The antenna operates in the UWB frequency band (2.9–10.61 GHz), and can shield interferences from WiMAX (3.3–3.6 GHz), WLAN (5.150–5.825 GHz) and X-uplink (7.9–8.4 GHz) bands, as well as exhibits a certain of bendability. Three nested "C" slots of different sizes were adopted to achieve notch features. The simulation and test results demonstrate that the proposed antenna can generate signal radiation in the desired UWB frequency band while retaining the desired notch properties and having acceptable SAR values on-body, making it a viable candidate for usage in flexible or wearable communication transmission devices. The research provides a facile and highly efficient method for fabricating flexible/wearable UWB antennas, that is, the effective combination of inkjet printing processing, flexible substrates, low temperature-activated conductive ink and antenna structure design.

Filtenna Designed with Defected Ground Structure (DGS) for Ultra-wideband Applications

In microwave imaging applications, filter and antenna are the key components as front-end devices and function independently. Antenna radiates and receives signals to or from nearby scattered objects while filter is used to suppress unwanted signals noise before and after the required bandwidth. Current antennas suffer from high loss, bandwidth limitation and impedance mismatch and deteriorate their performance near the band-edges if connected as a stand-alone device. Due to the current trend towards simplicity and size reduction, researchers are focusing on integrating the filter and antenna into a single module called integrated filter-antenna (IFA) or filtering antenna (filtenna). These would improve the noise performance of the system and pre-filtering requirements such as complexity algorithm in inverse scattering techniques This paper introduces a novel contribution in the field of UWB antenna design by incorporating Defected Ground Structure (DGS) on both the antenna and filter. Thus, the main aim of this research is to conduct detail parametric studies of the proposed integrated filter-antenna with defected ground structure (DGS) to enhance the performance of imaging system. The proposed IFA will be analysed on Rogers RO4003C dielectric substrate by using EM tool, Computer Simulation Technology (CST) and measured using R&S Vector Network Analyzer (VNA). A compact ultra-wideband (UWB) filter and UWB elliptical antenna are designed and examined in detail before combining the devices. Different types of DGS are designed and act as the ground layer of the proposed filtering antenna. The bandwidth of each design is then compared with and without the existence of DGS. The results show that the proposed IFA with DGS implementation achieve the targeted objective, with compact size, enhanced bandwidth and better performance compared to the conventional design of filter and antenna. By integrating filter and antenna into one subsystem, it can help to reduce the loss and enhancing the bandwidth of the system thus letting the antenna to operate at more different frequencies that fall within the range. Both simulated and measured results prove that by integrating filter and antenna into one module, a low loss and larger bandwidth can be accomplished. High performance compact IFA can act as microwave transceiver to improve the overall performance of the microwave imaging system, MIS.

Chamfered edge filtering ultra-wideband antenna integrated with H-unit cell-loaded feed line for improved out-of-band rejection

Abstract This paper proposes a passive filtering antenna for ultra-wideband (UWB) applications. The edge chamfering technique is adopted to construct the UWB antenna. The designed UWB antenna has a fractional bandwidth of 135%. A low-pass filter (LPF) is embedded on the feed line of the UWB antenna to convert it into a narrowband antenna that works at 2.45 GHz with 29.5% fractional bandwidth by removing the high-frequency components. The LPF is a transmission line with a stepped impedance configuration loaded with an H-shaped unit cell. The proposed filtering antenna is fabricated and tested. The measured results indicate the gain is >4.2 dBi and the radiation efficiency is >75%.

Hammer-shaped slotted antenna design and analysis for wireless applications

The method for creating a two-element multiple-input and multiple-output (MIMO) ultra-wideband hammer antenna is presented in this paper. It has been suggested to investigate characteristics of this ultra-wideband antenna design. Split-ring resonators (SRR), made of metamaterial, have enhanced performance of antenna in terms of multiplexing effectiveness, S parameters, radiation characteristics, envelope correlation coefficient, and diversity gain. Reduced weight and size of this antenna technology make it easier to integrate into a 5G and linked object receiver. Because the outputs from the previous designer to the target entity did not satisfy the standards, we thoroughly researched design attributes and made parametric changes to the design to reach the precise outcomes.

Ultra Wideband (UWB) Multiple Input and Multiple Output (MIMO) Antenna Design : A Review

Since the Federal Communication Commission (FCC) issued a license for the 3.1 – 10.6 GHz frequency spectrum for unlicensed radio applications, many papers have been published regarding ultrawideband (UWB) antenna design. The issue of UWB antenna design is determining how to create an antenna with a wide bandwidth, capable of rejecting communication systems that coexist with UWB bands, and capable of designing UWB antennas for multiple input multiple output (MIMO) communication system applications. This study examines the design of UWB antennas with monopole and slot types based on evaluations published over the last two decades. The discussion began with UWB and MIMO systems and then moved on to the configuration of monopole and slot UWB antennas. UWB antenna layout with notched bands and the several types of notched bands available. Finally, two port and quad-port MIMO antenna configuration is examined. To further understand UWB antenna design, numerous UWB antenna configurations are simulated. The outcomes of this review can be utilized as preliminary reading material for researchers looking into UWB antennas.

UWB Circular Fractal Antenna with High Gain for Telecommunication Applications.

The present study proposes a new, highly efficient fractal antenna with ultra-wideband (UWB) characteristics. The proposed patch offers a wide simulated operating band that reaches 8.3 GHz, a simulated gain that varies between 2.47 and 7.73 dB throughout the operating range, and a high simulated efficiency that comes to 98% due to the modifications made to the antenna geometry. The modifications carried out on the antenna are composed of several stages, a circular ring extracted from a circular antenna in which four rings are integrated and, in each ring, four other rings are integrated with a reduction factor of 3/8. To further improve the adaptation of the antenna, a modification of the shape of the ground plane is carried out. In order to test the simulation results, the prototype of the suggested patch was built and tested. The measurement results validate the suggested dual ultra-wideband antenna design approach, which demonstrates good compliance with the simulation. From the measured results, the suggested antenna with a compact volume of 40 × 24.5 × 1.6 mm3 asserts ultra-wideband operation with a measured impedance bandwidth of 7.33 GHz. A high measured efficiency of 92% and a measured gain of 6.52 dB is also achieved. The suggested UWB can effectively cover several wireless applications such as WLAN, WiMAX, and C and X bands.

Automated and Optimized Regression Model for UWB Antenna Design

Antenna design involves continuously optimizing antenna parameters to meet the desired requirements. Since the process is manual, laborious, and time-consuming, a surrogate model based on machine learning provides an effective solution. The conventional approach for selecting antenna parameters is mapped to a regression problem to predict the antenna performance in terms of S parameters. In this regard, a heuristic approach is employed using an optimized random forest model. The design parameters are obtained from an ultrawideband (UWB) antenna simulated using the high-frequency structure simulator (HFSS). The designed antenna is an embedded structure consisting of a circular monopole with a rectangle. The ground plane of the proposed antenna is reduced to realize the wider impedance bandwidth. The lowered ground plane will create a new current channel that affects the uniform current distribution and helps in achieving the wider impedance bandwidth. Initially, data were preprocessed, and feature extraction was performed using additive regression. Further, ten different regression models with optimized parameters are used to determine the best values for antenna design. The proposed method was evaluated by splitting the dataset into train and test data in the ratio of 60:40 and by employing a ten-fold cross-validation scheme. A correlation coefficient of 0.99 was obtained using the optimized random forest model.

Miniaturized Coplanar Waveguide-Fed UWB Antenna for Wireless Applications

This study presents a compact ultra-wideband (UWB) antenna fed by a coplanar waveguide (CPW) with huge bandwidth for the demands of modern wireless communities. To overcome some technical limitations of the employed substrate and UWB antenna design, a slotted patch resonator was used to create and simulate this antenna based on Locked-Key topology. It has been printed on a 1.5 mm-thick FR4 substrate with a dielectric constant of 4.4. A feeder with characteristic impedances of 50 Ω has been employed. A CST electromagnetic simulator has been employed to simulate and analyze the antenna design. It is operated within the UWB spectrum with a bandwidth of 10.354 GHz, spanning 3.581 to 14 GHz. The overall surface area is 27 × 25 mm2. The gain and maximum efficiency within UWB are better than 3 dBi and 82%, respectively. The antenna is fabricated, and the simulated results are correlated with the measured ones. Finally, the equivalent circuit models for the antenna and rectifier circuit are simulated and measured.

Design of UWB Antenna for Multimedia and High-Speed Automotive Communication

This paper reveals a planar ultra-wideband (UWB) antenna with defective ground structure is designed and analyzed. A size of 24 × 24 × 1.6 mm3 circular shaped proposed UWB antenna uses FR-4 substrate covering the impedance bandwidth (S11 ≤ −10 dB) of 11 GHz ranging from 2.9 GHz to 13.9 GHz and also offers a peak gain of 5.1 dBi, more than 65% of efficiency in overall UWB operating band with omnidirectional radiation pattern. The simulated results of proposed UWB planar antenna have good performance, and is well-suited for high-speed and multimedia communications in vehicular environment.

Performance Analysis of an Ultra-Wide Band (UWB) Antenna for Communication System

A spherical shape ultra-wideband antenna is a microstrip patch antenna whose emitted signal bandwidth exceeds the lesser of 500 MHz. One of the major issues hindering the ultra-wideband antennas is poor diversity factors, poor voltage standing wave ratio and poor power efficiency to transmit the required signals. In this research work, the method of approach is the design and analysis of a spherical shape ultra-wideband antenna with the use of computer simulation technology (CST). This antenna is working under the resonant frequency of 6 GHz on a frequency bandwidth of 4-9 GHz. However, this research work has made an intensive review of related works. A spherical shape microstrip antenna with a diameter of 13mm and a radius of 6.5mm was designed, after which a simulation was carried out using the computer simulation technology software. The result from the radiated power shows how high the radiative efficiency is and from the results we were able to observe that the ultra-wideband antenna uses a very low amount of power but can transmit a better outgoing power from the 0.5 watts stimulated power. In this research work, an evaluation process on the envelope correlation coefficient of the antenna s-parameters was carried out, with a good result was obtained. Most importantly the diversity gain of the antenna proves to be good and efficient due to the effectiveness of the antenna radiation efficiency. The results of this antenna produce a very good voltage standing wave ratio (VSWR), the voltage standing wave ratio of this spherical ultra-wideband antenna is less than 2% with a very low return loss reflection. In conclusion, the spherical shape antenna is good for ultra-wideband purposes because of its robustness in delivering high-quality signals with a very low return loss. So, it stands the chance of recommendations in the communication industries due to its high radiation efficiency rate and good VSWR.

A Miniaturized Microstrip Antenna for Ultra-wideband Applications

In this paper, the authors present an ultra-wideband (UWB) planar antenna with defected ground structure (DGS) for various wireless applications. The operating frequency of the proposed geometry is in the range of 3.1 to 10.6 GHz. The proposed compact geometry antenna is applicable for the UWB applications. In order to optimize the dimensions of the antenna, a parametric analysis has been performed. The measured S11 magnitude is less than -10 dB over the band, and it has an impedance bandwidth of 10.60 GHz. The designed UWB antenna gives maximum radiation efficiency and gain of 96.5% and 3.30 dBi, respectively. Also, it gives good time-domain characteristics over the entire resonating band. The designed UWB antenna is simple geometry, and it is applicable for numerous wireless applications.

Designing of Ultra-Wideband Microstrip Patch Antenna for WLAN Application – A Review

As per the antenna theory, the main advantage of the microstrip patch antenna (MPA) is that it is small in size, suitable for flat and non-planar surfaces, and is simple to manufacture and low in cost using current printed circuit technology. Therefore, in this modern era, microstrip patch antennas are widely used in communication accessories. Ultra-Wide Band (UWB) technology is emerging as a promising solution to this problem. High data rates, large bandwidths and immunity to multipath interference are important features of UWB. UWB antennas must not create unwanted distortions and therefore good design is very important. This paper reviews the work done in this field to date and attempts to give an overall scenario of the research direction in UWB antenna design. This article has shown in the previous years of research that various antenna design methods in the ultra-wideband range, such as U-shaped cutting edge tapered grooves, DGS-based microstrip patch antennas, planar partially grounded patch antennas, and parasitic patch antennas, Fractal antennas and reconfigurable antennas.

Ultra-Wideband Antennas for Biomedical Imaging Applications: A Survey

Microwave imaging is an active area of research that has garnered interest over the past few years. The main desired improvements to microwave imaging are related to the performances of radiating systems and identification algorithms. To achieve these improvements, antennas suitable to guarantee demanding requirements are needed. In particular, they must operate in close proximity to the objects under examination, ensure an adequate bandwidth, as well as reduced dimensions and low production costs. In addition, in near-field microwave imaging systems, the antenna should provide an ultra-wideband (UWB) response. Given the relevance of the foreseen applications, many UWB antenna designs for microwave imaging applications have been proposed in the literature. In this paper, a comprehensive review of different UWB antenna designs for near-field microwave imaging is presented. The antennas are classified according to the manufacturing technology and radiative performances. Particular attention is also paid to the radiation mechanisms as well as the techniques used to reduce the size and improve the bandwidth.

A Low Profile Ultra-Wideband Antenna Design with Reconfigurable Notch-Bands for Wideband and Narrowband Applications

A Low Profile Ultra-Wideband Antenna Design with Reconfigurable Notch-Bands for Wideband and Narrowband Applications

New MIMO Antenna with Filtration for the Future Multiuser Systems in Satellite Communications

This paper emphasizes the function of the split ring resonator (SRR) within the design of ultra-wideband (UWB) antennas. We presented an antenna that belongs to the category of UWB antenna with two rejected bands based on square SRR. At first, we presented a UWB antenna. This antenna is designed to operate in the band 2.3–11.5 GHz. Then, with the integration of two SRR cells, we were capable of filtering the bands 3.7–3.9 GHz and 8.7–8.9 GHz without losing the UWB characteristics outside these rejected bands. Next, to ensure the proper performance of the MIMO system, we studied the use of metamaterials in the design of MIMO (Multiple-Input Multiple-Output) antennas for miniaturization and antenna performance.

Design and analysis of UWB antenna with quintuple band-notched and wide-band rejection characteristics

AbstractIn this study, a compact ultra-wideband (UWB) antenna with quintuple band-notched and wide-band rejection characteristics is studied. The proposed antenna mainly consists of a rectangular radiating patch, a microstrip feeding line, and a modified rectangular ground plane. The quintuple band-notched functions with narrow stop bands are achieved at WiMAX (3.3–3.7 GHz), WLAN (5.15–5.35 GHz and 5.725–5.825 GHz), C-band IEEE INSAT/super-extended (6.7–7.1 GHz) by using three modified inverted U-shaped slots and two symmetrical rectangular slots on the radiating path. Each stop band formed in the UWB antenna can be adjusted independently, and deep reflection zeros are formed between the adjacent stop bands. The formation of reflection zeros improves the band-edge selectivity of the stop band, and the notch characteristics are more prominent. To further study the wide stop band (C-band and X-band) with good selectivity characteristics, a pair of L-shaped open slot is added to the edges of two rectangular slots. Additionally, a pair of modified Rho-shaped resonators is located near the feeding line to realize band-notched characteristic at ITU service bands (8.025–8.4 GHz), thus a quintuple band-notched UWB antenna is achieved. The shape factor (ratio of the −3 dB bandwidth to the −10 dB bandwidth) of the wide stop band is 0.56, which indicates that the antenna has excellent band-edge selectivity. To verify the performance of the proposed design, both the time-domain and the frequency-domain characteristics of the antenna have been studied and analyzed. The simulated and measured results verify the design as a good candidate for various portable UWB applications.

Comparative Exploration of Diverse Substrate Materials on Performance of Ultra Wide Band Antenna Design for on Body WBAN Applications

Comparative Exploration of Diverse Substrate Materials on Performance of Ultra Wide Band Antenna Design for on Body WBAN Applications

A Jug-Shaped CPW-Fed Ultra-Wideband Printed Monopole Antenna for Wireless Communications Networks

A type of telecommunication technology called an ultra-wideband (UWB) is used to provide a typical solution for short-range wireless communication due to large bandwidth and low power consumption in transmission and reception. Printed monopole antennas are considered as a preferred platform for implementing this technology because of its alluring characteristics such as light weight, low cost, ease of fabrication, integration capability with other systems, etc. Therefore, a compact-sized ultra-wideband (UWB) printed monopole antenna with improved gain and efficiency is presented in this article. Computer simulation technology microwave studio (CSTMWS) software is used to build and analyze the proposed antenna design technique. This broadband printed monopole antenna contains a jug-shaped radiator fed by a coplanar waveguide (CPW) technique. The designed UWB antenna is fabricated on a low-cost FR-4 substrate with relative permittivity of 4.3, loss tangent of 0.025, and a standard height of 1.6 mm, sized at 25 mm × 22 mm × 1.6 mm, suitable for wireless communication system. The designed UWB antenna works with maximum gain (peak gain of 4.1 dB) across the whole UWB spectrum of 3–11 GHz. The results are simulated, measured, and debated in detail. Different parametric studies based on numerical simulations are involved to arrive at the optimal design through monitoring the effects of adding cuts on the performance of the proposed antennas. Therefore, these parametric studies are optimized to achieve maximum antenna bandwidth with relatively best gain. The proposed patch antenna shape is like a jug with a handle that offers greater bandwidth, good gain, higher efficiency, and compact size.

Design of Dual-Band Notched UWB Antenna Loaded with Split Ring Resonators for Wide Band Rejection

ABSTRACT Nowadays, the design of a miniaturised ultra-wideband (UWB) antenna with wide dual band-notched characteristics gained widespread demand in wireless communications to reduce interference. The design of a planar CPW-fed circular UWB antenna loaded with split ring resonators and stubs is presented to eliminate two frequency bands. Two symmetrical circular split ring resonators are etched below the CPW feed at the backside of a circular UWB monopole antenna to suppress 3.61 GHz–5.57 GHz (sub-6 GHz band) wideband interference, whereas the 7.06 GHz–8.79 GHz (X-band uplinks and downlinks) band is suppressed by loading two L-shaped stubs. Slots are also made on the patch and ground to enhance impedance matching at a lower resonance frequency. The proposed notch band antenna has a compact size of 38 × 32 × 1.6 mm3 and has the highest gain of 5.75 dB at a frequency of 9 GHz. The parametric analysis has been performed to obtain optimised dimensions for better performance. The designed antenna is simulated, prototyped and tested to validate the antenna design.

Design and Implementation of Ultra-Wide Band Antenna for Partial Discharge Detection in High Voltage Power Equipment

Partial discharges (PD) are the most common and harmful threat to the health of electrical insulation of high voltage (HV) and high field (HF) equipment. The occurrence of PD activity in HV and MV equipment is at the same time a cause and a sign of insulation degradation that may eventually result in the breakdown of the HV power equipment. For the safe and reliable operation of HV power equipment, continuous PD monitoring needs to be conducted conveniently to prevent any unplanned power outages and damage to electrical power equipment. The ultra-high frequency (UHF) PD measurement method has been widely used as an effective technique to detect PD activity on HV power equipment due to its non-invasive principle. To enable PD detection accuracy, there is still a need for more sensitive PD sensors that can assist the UHF PD monitoring system by suppressing ambient background noise and low-frequency electromagnetic interferences from telecommunication such as GSM signals. To tackle the sensitivity issues, this article presents a new design of ultra-wideband (UWB) microstrip patch antenna that is capable of effective suppression of low-frequency interference signals. The proposed antenna, designed, simulated, and optimized using the CST Microwave Studio software, has a bandwidth of 3.3GHz, below -10dB, in the operating frequency range of 1.2GHz-4.5GHz. The prototype of this antenna, printed on an FR4 substrate of a thickness of 1.6mm and a dielectric constant of 4.4, featuring a compact size of 100mm <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$\times100$ </tex-math></inline-formula> mm <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$\times1.6$ </tex-math></inline-formula> mm, was implemented to detect PD through laboratory experiments. This paper shows that the designed UWB antenna has high sensitivity, good noise rejection and it is, therefore, a promising candidate sensor for PD detection on HV equipment.