Design Criteria Research Articles

Research on Design Parameters for Fatigue Performance of Asphalt Mixtures.

The fatigue performance of the asphalt mixture was the main focus of this study, with five typical factors-phase angle, cumulative dissipated energy, failure strain, failure stiffness modulus, and strain rate-identified as potential design indexes. The effect of asphalt content on the parameters under different gradation and stress ratios was tested. It was observed that the selected parameters exhibited varying levels of sensitivity and relevance to the fatigue behavior of asphalt mixtures under cyclic loads. By comparison, the strain rate proved sensitive to the asphalt content and independent of the other parameters, namely aggregate gradations and stress ratio, thus establishing the strain rate as a critical design index based on fatigue performance. On this basis, a design method based on the fatigue performance for the asphalt mixtures is herein proposed. It was confirmed that the asphalt mixture formulated using the proposed method exhibited enhanced fatigue endurance compared to those designed using the conventional method.

Sustainable Logistics: Synergizing Passive Design and PV–Battery Systems for Carbon Footprint Reduction

As more companies strive for net-zero emissions, mitigating indirect greenhouse gas emissions embedded in value chains—especially in logistics activities—has become a critical priority. In the European logistics sector, sustainability and energy efficiency are receiving growing attention, given the sector’s intersectional role in both transportation and construction. This transition toward low-carbon logistics design not only reduces carbon emissions but also yields financial benefits, including operational cost savings and new market opportunities. This study examines the impact of passive design strategies and low-carbon technologies in a Swedish logistics center, assessed using the low-carbon design criteria from the BREEAM International standard, version 6. The findings show that passive energy-efficient measures, such as the installation of 47 skylights for natural daylighting, reduced light power density in accordance with AHSHARE 90.1-2019 and the integration of free night flushing, contribute to a 23% reduction in total energy consumption. In addition, the integration of 600 PV panels and 480 batteries with a capacity of 268 ampere-hours and 13.5 kWh storage, operating at 50 volts, delivers a further 56% reduction in carbon emissions. By optimizing the interaction between passive design and active low-carbon technologies, this research presents a comprehensive feasibility analysis that promotes sustainable logistics practices while ensuring a future-proof, low-carbon operational model.

Design Guidelines for Building and Infrastructure Integrated Photovoltaic Modules

The demand for renewable energy is increasing as efforts to decarbonize energy sources continue. Photovoltaic (PV) generation systems are the main contributor to the growth of renewable energy, but limited land availability in countries such as Belgium and Netherlands poses a challenge to their deployment. Integrated PV (IPV) can be a promising solution, but requires special consideration regarding electrical and fire safety, efficiency, durability, cost, and environmental impact in the design process. This study seeks to assist designers of IPV products by guiding the selection of materials, technologies, mechanical designs, and production methods for PV semifabricates (SF). It provides a comprehensive list of general design criteria, each offering various options in terms of bill of materials and production technologies. These options come with their own set of advantages and disadvantages, which are enumerated and quantified wherever feasible. The general design guidelines are validated based on the building‐integrated PV and infrastructure‐integrated PV demonstrators (in this case a noise barrier) being developed in the Solar Energy Made Regional (SolarEMR) project.

Automatic Design of Robot Swarms under Concurrent Design Criteria: A Study Based on Iterated F‐Race

Automatic design is an appealing approach to realizing robot swarms. In this approach, a designer specifies a mission that the swarm must perform, and an optimization algorithm searches for the control software that enables the robots to perform the given mission. Traditionally, research in automatic design has focused on missions specified by a single design criterion, adopting methods based on single‐objective optimization algorithms. In this study, we investigate whether existing methods can be adapted to address missions specified by concurrent design criteria. We focus on the bi‐criteria case. We conduct experiments with a swarm of e‐puck robots that must perform sequences of two missions: each mission in the sequence is an independent design criterion that the automatic method must handle during the optimization process. We consider modular and neuroevolutionary methods that aggregate concurrent criteria via the weighted sum, hypervolume, or ‐norm. We compare their performance with that of Mandarina, an original automatic modular design method. Mandarina integrates Iterated F‐race as an optimization algorithm to conduct the design process without aggregating the design criteria. Results from realistic simulations and demonstrations with physical robots show that the best results are obtained with modular methods and when the design criteria are not aggregated.

Didactic and Psychological Principles of Successful Design of Serious Games

In this paper, a systematic, evidence-based overview of didactic and psychological design principles is provided, which have a significant impact on the learning success of Serious Games. Design criteria are described that relate to the structure of games, the principle of learning through play, interaction regarding usability and playability, as well as motivation with the necessary game incentives. Furthermore, perspectives on the future development of Serious Games are outlined, focusing particularly on the implementation of concepts of adaptive e-learning and AI-supported learning.

Understanding bi-modal seas, shingle beach response and flood risk at Hayling island, UK

Beach management through nourishment and annual recycling has been applied for over 37 years to manage flood and coastal erosion risk to 1700 properties at Eastoke, Hayling Island, UK. This form of natural flood risk management has proved successful in avoiding the annual flooding that blighted this area previously. However there have been unexpected storm events which have caused beach erosion and localised flooding. Using long-term nearshore wave datasets and state-of-the-art statistical methods, new multivariate extreme wave conditions were derived. The conditions were applied to simulate beach profile response, estimated bimodal overtopping rates and resulting flood inundation, then validated against recent storm events. The Eastoke beach was found to meet its original design criteria of a 0.5% AEP standard of protection for unimodal wave conditions. However, it experiences greater roll back erosion, wave overwash and therefore flood inundation under certain bimodal wave conditions, causing uncertainty around the future standard of protection.It remains unclear if the unexpected beach response at Eastoke resulted from increased storminess due to climate change, additional loading by mixed sea/swell events, increasing bimodal events, or the assumptions within the original bivariate analysis, leading to incorrect AEP attribution.Communicating these issues to practitioners and a non-specialist audience is challenging as we tend to oversimplify, despite every beach and storm being unique. Better understanding of mixed beaches both in situ and through parametric and numerical models would reduce uncertainty, to ensure communities are resilient to climate change.

Design of piezoelectric quasi— zero—stiffness metastructures for improved low—frequency vibration isolation

Abstract In this paper, a novel type of piezoelectric quasi–zero stiffness (QZS) metastructure is proposed and the improved vibration isolation performance is investigated. A piezoelectric QZS metastructure is composed of curved beams covered with piezoelectric macro–fiber composite patches, to which digital circuits are connected. Based on the principle of minimum potential energy and the mode superposition method, the constrain on the geometry and material parameters of the piezo–curved beams to achieve QZS is given. According to this design criterion, 1D, 2D and 3D piezoelectric QZS metastructures are designed, and their improved low–frequency vibration isolation characteristics are comprehensively analyzed through theoretical, numerical and experimental studies. It is demonstrated that by optimizing the parameters of the resonant transfer functions implemented in the digital circuits, high–level damping localized near the first resonant peak can be introduced into the curved beams. As a result, the resonant peaks of the metastructures can be reduced without compromising the isolation performance beyond those peaks.

Balancing Playability and Historical Accuracy in Game Design - Developing the Struve Geodetic Arc Mobile Game

Numerous digital games and media with historical themes aim to educate or engage audiences with heritage. When developing a historical video game, some of the most critical design decisions are centered around finding the balance between an accurate presentation of historical facts and engaging gameplay. This paper examines the game developer's role in selecting and presenting historical content through a case study of a mobile game development process. The design choices and developers' positions related to using historical facts are examined through thematic analysis of interview data and game design documents. Recurring themes in the data reveal a constant interplay between game features and historical content, supported by historical knowledge and technology. In small teams, individual developers often make crucial design decisions while performing multiple roles. As key findings, we report that the resourcing and timing of historical research significantly impacts developers' decisions, and note varying degrees of interest in historical accuracy within the development team.

Microwave planar resonator-based sensor for pharmaceutical tablet-moisture characterization based on complementary symmetric meander line-shaped structure

ABSTRACT This paper presents a microwave planar resonator-based sensor for moisture sensing application. The resonator sensor is designed utilising the Complementary Symmetric Meander Line-Shaped Resonator topology and operated in the S-band with the frequency range of 2.6–3.3 GHz. The main design criteria of this sensor are based on low manufacturing complexity and cost, ease of fabrication and integration with existing equipment, despite its high sensitivity and accuracy. When this sensor is loaded/unloaded with four different Material Under Tests with relative permittivity values varying from 2.3 to 4.3, the electromagnetic simulations were validated against experimental measurements according to the resonant notch frequency of transmission coefficient for the sensor’s material-characterisation performance. The simulated and experimental results show good agreements on the resonant frequencies and demonstrate the sensor’s high performance with a normalised sensitivity of 6%. Resonant frequencies are well correlated with material permittivity using a quadratic-polynomial regression with R 2 = 0.999. Moreover, moisture-content percentages of both dry and moist paracetamol tablets, measured by a loss-on-drying moisture analyser between 1.74% and 17.72%, have good correlation with the sensor’s resonant-frequency shift from on-line measurements. This resonator sensor has exhibited the potential for detecting moisture contents in small-sized materials in various industries.

Flexural behaviour and shear capacity of RC flat plate sections during fire exposure

PurposeFire safety is a pivotal requirement in building codes. Prescribed design criteria have been the norm to achieve it, which imposes limitations on engineers, including the inability to accommodate new solutions/materials. The shift towards performance-based design offers the potential to address shortcomings of the prescribed design. However, this shift also significantly increases the workload on structural engineers without a corresponding increase in their engineering fees. Simplified design tools are needed to assist engineers in this transition.Design/methodology/approachThe paper is divided into sections investigating equivalent standard fire duration, thermal deformations, flexural behaviour and shear capacity of flat slabs when exposed to fire. The first section conducts a parametric study correlating equivalent and realistic fire durations using the average internal temperature profile (AITP) method, resulting in statistical equations estimating equivalent fire duration. The second section evaluates thermal deformations and flexural behaviour through a parametric study considering various parameters. This section results in statistical equations estimating thermal deformations and flexural behaviour of flat slab sections during fire exposure. The final section focuses on shear capacity, developing simplified heat transfer formulas and statistical equations predicting compression zone depth reduction. The section presents methodologies predicting flat slab sections' one-way and two-way shear capacities during fire exposure.FindingsStructural engineers can use the proposed methods for daily design work without applying complex heat transfer calculations. When the equivalent standard fire duration is utilized, a flat slab’s thermal deformations, flexural behaviour and shear capacity under an actual fire condition can be calculated. As such, the methods would be highly beneficial in assessing the structural integrity of a building during an active fire incident.Originality/valueThe paper provides engineers with the tools required to evaluate the safety of flat slab sections during fire exposure. The methodologies presented in the paper enable engineers to use performance-based design for slab sections by (1) converting any real fire scenario to a standard fire with an equivalent duration, (2) assessing their thermal behaviour, (3) evaluating their flexural behaviour and (4) evaluating their flexural and shear capacities. The paper concludes with a case study example demonstrating the detailed application of the developed methods.

Evaluation of space efficiency criteria in high-rise buildings based on functions: a case study of Türkiye

ABSTRACT High-rise buildings have become a significant solution to address the challenges posed by the rapid growth of urban populations and space limitations in cities. Efficient planning and design of these buildings, aiming to achieve more productivity, can be realized through ensuring space efficiency. This research compares architectural and structural design criteria affecting space efficiency in high-rises based on their functions, aiming to assess the degree of correlation among these criteria, space efficiency, and their interrelations. Currently, no studies examine the differences or similarities in space efficiency of high-rise buildings based on their functions. Additionally, selecting buildings from the same region as samples is a unique aspect of this study. Employing a case study method, the analysis encompasses 42 high-rises in Türkiye, ranging from 100 m to 300 m, and utilizes correlation analysis methods to examine the data. The comprehensive review of space efficiency in high-rises, based on their functions, yielded the following results: (i) Space efficiency ranged from 82.7% to 65.2% in high-rise case studies with different functions, with an average of 73.2%. (ii) A significant majority (83%) of the buildings followed orthogonal designs. (iii) Central core floor planning emerged as the preferred approach. (iv) Increasing elevator density reduced space efficiency. (v) Office buildings favored reinforced concrete frame systems, while residential buildings commonly used reinforced concrete shear wall systems. (vi) As building height increased, elevator and core areas expanded. These findings provide guidance for future high-rise building design and planning.

Maxpro Designs for Experiments with Multiple Types of Branching and Nested Factors.

Contemporary experiments often involve special factors known as branching factors. The levels of such factors determine the presence of some certain factors, referred to as nested factors. The design criteria for investigating the goodness of such designs are rarely developed. Furthermore, the existing criteria for such designs pay less attention to the space-filling property of low-dimensional projections of the design. The efficiencies of designs yielded by such criteria can markedly decrease when only a few factors are significant. To address this issue, this paper proposes a novel space-filling criterion based on the maximum projection criterion to evaluate the performance of the designs with branching and nested factors. A framework to construct optimal designs under the proposed criterion is also provided. Compared with the existing works, the resulting designs have better space-filling properties in all possible low-dimensional projections. Moreover, our strategy imposes no constraints on run size, level, and type of any factor, demonstrating its broad applicability.

Increasing dam failure risk in the USA due to compound rainfall clusters as climate changes

A changing climate, with intensifying precipitation may contribute to increasing failures of dams by overtopping. We present the first analysis of rainfall sequences and events associated with recent hydrologic failures of 552 dams in the United States. We find that the maximum 1-day rainfall associated with failure was often not extreme compared to dam spillway design criteria, even when accounting for rainfall statistics changing with time at each site. However, the combination of the total rainfall 5 to 30 days prior and the maximum 1-day rainfall associated with dam failure is rare. Persistent atmospheric circulation patterns that lead to recurrent rainfall events, rather than just more moisture in the atmosphere is a possible reason. The probability of these compound precipitation risks has increased across much of the country. With over 90,000 aging dams still in service, the increasing likelihood of intense rainfall sequences raises concerns about future dam failures.

Electromagnetic Interference Shielding Films: Structure Design and Prospects.

The popularity of portable and wearable flexible electronic devices, coupled with the rapid advancements in military field, requires electromagnetic interference (EMI) shielding materials with lightweight, thin, and flexible characteristics, which are incomparable for traditional EMI shielding materials. The film materials can fulfill the above requirements, making them among the most promising EMI shielding materials for next-generation electronic devices. Meticulously controlling structure of composite film materials while optimizing the electromagnetic parameters of the constructed components can effectively dissipate and transform electromagnetic wave energy. Herein, the review systematically outlines high-performance EMI shielding composite films through structural design strategies, including homogeneous structure, layered structure, and porous structure. The attenuation mechanism of EMI shielding materials and the evaluation (Schelkunoff theory and calculation theory) of EMI shielding performance are introduced in detail. Moreover, the effect of structure attributes and electromagnetic properties of composite films on the EMI shielding performance is analyzed, while summarizing design criteria and elucidating the relevant EMI shielding mechanism. Finally, the future challenges and potential application prospects of EMI shielding composite films are prospected. This review provides crucial guidance for the construction of advanced EMI shielding films tailored for highly customized and personalized electronic devices in the future.

Penalized Bayesian D-Optimal Designs for Regression Models of Continuous Response

We propose extending the use of desirability functions in Bayesian optimal designs for regression models. This technique generates experimental designs with good statistical inference properties according to Bayesian optimal design theory and practical features, as defined by an investigator. These practical features are defined by a penalty function, using an overall desirability function, which is added to a Bayesian $D$-optimal design criterion to penalize impractical experimental designs. This methodology is illustrated by two examples of regression models: quadratic and exponential. Then, we compare designs obtained for different prior distributions of unknown parameters by efficiency calculations and simulation study. Results show that the $D$-efficiencies of the penalized designs relative to the non-penalized Bayesian D-optimal designs are competitive.

Legged walking robot design applying the adaptive behavior of passive dynamic walking and interconnections among the different dynamics

In this paper, the authors propose a new design methodology for legged walking robots with dynamic characteristics suitable for walking motions by applying the unique properties of Passive Dynamic Walking as design criteria. The authors have identified the ‘adaptive behaviour’, in which the passive dynamic walking robot automatically adjusts its gait to keep walking in response to variations in physical parameters, such as the slope angle or mass, that constitute its mechanics. Furthermore, the authors discovered that this adaptive behaviour enables the transition of the structure and degrees of freedom of the passive dynamic walking robot to different mechanical systems through the application of ‘interconnections among different dynamics’. This paper introduces new mechanical design approach for legged robots that applies these unique properties, with its validity verified through the computer simulations.

Graphene nanoribbon FET technology‐based OTA for optimizing fast and energy‐efficient electronics for IoT application: Next‐generation circuit design

AbstractThe Internet of Things (IoT) and portable electronic devices are pivotal in enhancing living standards, with battery efficiency and compact design being critical for these devices. Analogue sensors, integral to advanced artificial intelligence, often necessitate complex real‐time processing and actuation. This study examines the performance of one‐dimensional armchair graphene nanoribbons in graphene nanoribbon field‐effect transistors (GNRFETs). It compares graphene nanoribbon‐based triple cascode operational transconductance amplifiers (GNRFET‐TCOTAs) with conventional CMOS‐based TCOTA. The results reveal substantial enhancements in the GNRFET‐based TCOTAs: the pure GNR‐TCOTA variant shows a remarkable 33.8% increase in DC gain and significant improvements in transconductance, slew rate, and gain‐bandwidth, with enhancements of 8.48, 5.85, and 8.56 times, respectively. Furthermore, the pure GNRFET TCOTA exhibits higher speed, lower energy‐delay product, and settling time compared to Si‐CMOS‐based TCOTA. The study also investigates the impact of critical design parameters on circuit performance. Overall, the research highlights the potential of GNRFETs to optimize TCOTA circuits, offering a path towards more efficient and compact electronic devices, thereby advancing the state of nanoelectronics and supporting the growth of high‐performance IoT systems.

High density cobalt single atom catalysts for H2O2 electrosynthesis: A critical design of carbon nitride skeleton

Direct hydrogen peroxide (H2O2) electrosynthesis via the two-electron oxygen reduction reaction (ORR) provides aburgeoning alternative to the industrial anthraquinone process.In this work, based on first-principles calculations and a targeted structural search, we predicted a new two-dimensional (2D) carbon nitride monolayer, PH-CN, accompanied by high mechanical stability and adequate intrinsic pyrrolic N-rich network, such remarkable merits ensure its greatpotential as substrates. Herein, we demonstrate how the coordination environment regulates the electronic structure of the Co central atom and thus steers the ORR selectivity and activity using a series of control samples based on the most prevalent CoN4 moiety. As expected, the acquired P-CoN4 and PH-CoN4 show excellent H2O2electrosynthesis performance with low thermodynamic overpotential of 0.02 and 0.07 V, as well as extremely high Co loadings of 26.28 and 27.42 wt%, respectively. This work sheds light on how the carbon nitride skeleton affects catalytic activities on Co-N-C catalysts.

Risk Assessment of Overturning of Freestanding Non-Structural Building Contents in Buckling-Restrained Braced Frames

The increasing demand in structural engineering now extends beyond collapse prevention to encompass business continuity planning (BCP). In response, energy dissipation devices have garnered significant attention for building response control. Among these, buckling-restrained braces (BRBs) are particularly favored due to their stable hysteretic behavior and well-established design provisions. However, BCP also necessitates the prevention of furniture overturning—an area that remains quantitatively underexplored in the context of buckling-restrained braced frames (BRBFs). Addressing this gap, this research designs BRBFs using various design criteria and performs incremental dynamic analysis (IDA) with artificially generated seismic waves. The results are compared with previously developed fragility curves for furniture overturning under different BRB design conditions. The findings demonstrate that the fragility of furniture overturning can be mitigated by a natural frequency shift, which alters the threshold of critical peak floor acceleration. These results, combined with hazard curves obtained from various locations across Japan, quantify the mean annual frequency of furniture overturning. The study reveals that increased floor acceleration in stiffer BRBFs can lead to a 3.8-fold higher risk of furniture overturning compared to frames without BRBs. This heightened risk also arises from the greater hazards at shorter natural periods due to stricter response reduction demands. The probabilistic risk analysis, which integrates fragility and hazard assessments, provides deeper insights into the evaluation of BCP.

Neurointerventional surveys between 2000 and 2023: a systematic review

BackgroundSurveys are increasingly used in neurointervention to gauge physicians’ and patients’ attitudes, practice patterns, and ‘real-world’ treatment strategies, particularly in conditions for which few, or no evidence-based, recommendations exist. While...