Fullerene Derivatives Research Articles

One‐Stone‐For‐Three‐Birds Strategy Using a Fullerene Modifier for Efficient and Stable Inverted Perovskite Solar Cells

AbstractThe electron extraction from perovskite/C60 interface plays a crucial role in influencing the photovoltaic performance of inverted perovskite solar cells (PSCs). Here, we develop a one‐stone‐for‐three‐birds strategy via employing a novel fullerene derivative bearing triple methyl acrylate groups (denoted as C60‐TMA) as a multifunctional interfacial layer to optimize electron extraction at the perovskite/C60 interface. It is found that the C60‐TMA not only passivates surface defects of perovskite via coordination interactions between C=O groups and Pb2+ cations but also bridge electron transfer between perovskite and C60. Moreover, it effectively induces the secondary grain growth of the perovskite film through strong bonding effect, and this phenomenon has never been observed in prior art reports on fullerene related studies. The combination of the above three upgrades enables improved perovskite film quality with increased grain size and enhanced crystallinity. With these advantages, C60‐TMA treated PSC devices exhibit a much higher power conversion efficiency (PCE) of 24.89 % than the control devices (23.66 %). Besides, C60‐TMA benefits improved thermal stability of PSC devices, retaining over 90 % of its initial efficiency after aging at 85 °C for 1200 h, primarily due to the reinforced interfacial interactions and improved perovskite film quality.

One-Stone-For-Three-Birds Strategy Using a Fullerene Modifier for Efficient and Stable Inverted Perovskite Solar Cells.

The electron extraction from perovskite/C60 interface plays a crucial role in influencing the photovoltaic performance of inverted perovskite solar cells (PSCs). Here, we develop a one-stone-for-three-birds strategy via employing a novel fullerene derivative bearing triple methyl acrylate groups (denoted as C60-TMA) as a multifunctional interfacial layer to optimize electron extraction at the perovskite/C60 interface. It is found that the C60-TMA not only passivates surface defects of perovskite via coordination interactions between C=O groups and Pb2+ cations but also bridge electron transfer between perovskite and C60. Moreover, it effectively induces the secondary grain growth of the perovskite film through strong bonding effect, and this phenomenon has never been observed in prior art reports on fullerene related studies. The combination of the above three upgrades enables improved perovskite film quality with increased grain size and enhanced crystallinity. With these advantages, C60-TMA treated PSC devices exhibit a much higher power conversion efficiency (PCE) of 24.89 % than the control devices (23.66 %). Besides, C60-TMA benefits improved thermal stability of PSC devices, retaining over 90 % of its initial efficiency after aging at 85 °C for 1200 h, primarily due to the reinforced interfacial interactions and improved perovskite film quality.

Dose-Response Effect of Various Concentrations of Cl-Containing Water-Soluble Derivatives of C60 Fullerenes on a Selective Regulation of Gene Expression in Human Embryonic Lung Fibroblasts (HELF).

The new synthesized water-soluble derivatives of C60 fullerenes are of a great interest to researchers since they can potentially be promising materials for drug delivery, bioimaging, biosonding, and tissue engineering. Surface functionalization of fullerene derivatives changes their chemical and physical characteristics, increasing their solubility and suitability for different biological systems applications, however, any changes in functionalized fullerenes can modulate their cytotoxicity and antioxidant properties. The toxic or protective effect of fullerene derivatives on cells is realized through the activation or inhibition of genes and proteins of key signaling pathways in cells responsible for regulation of cellular reactive oxygen species (ROS) level, proliferation, and apoptosis. The 3-[4,5-dimethylthiazol-2-yl]-2,5 diphenyl tetrazolium bromide (MTT) assay was used to assess cells viability. Flow cytometry analyses was applied to measure proteins levels in human embryonic lung fibroblasts (HELF) cells. HELF is a standard, stable and well described human cell line that can be passaged many times. Quantitation of ROS was assessed using H2DCFH-DA. Fluorescence images were obtained using microscopy. Expression of BCL2, CCND1, CDKN2A, BRCA1, BAX, NFKB1, NOX4, NRF2, TBP (reference gene) was analyzed using real-time Polymerase chain reaction (PCR). We found that high and low concentrations of fullerene C60 derivatives with the five residues of potassium salt of 6-(3-phenylpropanamido)hexanoic (F1) or 6-(2-(thiophen-2-yl)acetamido)hexanoic (F2) acid and a chlorine atom attached directly to the cage cause diametrically opposite activation of genes and proteins of key signaling pathways regulating the level of oxidative stress and apoptosis in HELF. High concentrations of F1 and F2 have a genotoxic effect, causing NADPH oxidase 4 (NOX4) expression activation in 24-72 hours (2-4 fold increase), ROS synthesis induction (increase by 30-40%), DNA damage and breaks (2-2.5 fold 8-oxodG level increases), and activation of nuclear factor kappa-light-chain-enhancer of activated B cells (NF-κB) (by 40-80%) against the background of reduced NF-E2-related factor 2 (NRF2) expression (by 20-45%). Low concentrations of F1 and F2 produced a cytoprotective effect: in 24-72 hours they reduce the oxidative DNA damage (by 20-40%), decrease the number of double-strand DNA breaks (by 20-30%), increase the level of anti-apoptotic proteins and enhance the antioxidant response activating the NRF2 expression (NRF2 gene expression increases 1.5-2.3 fold, phosphorylated form of the NRF2 protein increases 2-3 fold). Obtained results show that in low doses studied fullrens may serve as perspective DNA protectors against the damaging genotoxic factors.

Fullerene‐Free p–i–n Perovskite Solar Cells: Direct Deposition of Tin Oxide on Perovskite Layer Using Ligand Bridges

AbstractIn p–i–n perovskite solar cells (PSCs), fullerene derivatives are predominantly used as an electron transport material (ETM) despite their disadvantages, such as parasitic absorption in the short wavelength range and high cost. State‐of‐the‐art n‐i‐p PSCs are fabricated using SnO2 as the ETM due to their high charge transfer ability, transparency, and low cost. However, in p–i–n PSCs, dispersing SnO2 nanoparticles in a solvent that does not damage the perovskite and forming a uniform layer is challenging. Herein, a strategy of directly depositing SnO2 quantum dots (QDs) on perovskite using ethylenediamine (EDA) for high‐performance applications is reported, which involves a SnO2 QD solution designed with a damage‐free cosolvent. Treating the SnO2 QD layer with the EDA strategy creates a conformal SnO2 QD layer and improves charge transport. This strategy achieves a high power conversion efficiency (PCE) of 18.9% in PSCs with a 1.77 eV bandgap, which is the highest PCE reported for wide bandgap p–i–n PSCs using an inorganic ETM. The top SnO2 layer enables ITO deposition without sputtering damage and achieves a bifacial factor of 99% due to the high transmittance of SnO2 QD. The resulting four‐terminal all‐perovskite tandem exhibited a PCE of 27.0%.

A Quantum Mechanical MP2 Study of the Electronic Effect of Nonplanarity on the Carbon Pyramidalization of Fullerene C60.

Among C60's diverse functionalities, its potential application in CO2 sequestration has gained increasing interest. However, the processes involved are sensitive to the molecule's electronic structure, aspects of which remain debated and require greater precision. To address this, we performed structural optimization of fullerene C60 using the QM MP2/6-31G* method. The nonplanarity of the optimized icosahedron is characterized by two types of dihedral angles: 138° and 143°. The 120 dihedrals of 138° occur between two hexagons intersecting at C-C bonds of 1.42 Å, while the 60 dihedrals of 143° are observed between hexagons and pentagons at C-C bonds of 1.47 Å. NBO analysis reveals less pyramidal sp1.78 hybridization for carbons at the 1.42 Å bonds and more pyramidal sp2.13 hybridization for the 1.47 Å bonds. Electrostatic potential charges range from -0.04 a.u. to 0.04 a.u. on the carbon atoms. Second-order perturbation analysis indicates that delocalization interactions in the C-C bonds of 1.42 Å (143.70 kcal/mol) and 1.47 Å (34.98 kcal/mol) are 22% and 38% higher, respectively, than those in benzene. MP2/Def2SVP calculations yield a correlation energy of 13.49 kcal/mol per electron for C60, slightly higher than the 11.68 kcal/mol for benzene. However, the results from HOMO-LUMO calculations should be interpreted with caution. This study may assist in the rational design of fullerene C60 derivatives for CO2 reduction systems.

C60–bicyclo[2.2.1]heptanes: new hybrid mono- and hexakis-adducts of the C60 fullerene

New fullerene derivatives keep attracting attention of chemists due to their possible applications. Fullerene adducts with saturated polycyclic hydrocarbons represent one of the promising classes of fullerene compounds but still have rare examples. To enhance molecular diversity of fullerene derivatives in this direction, we have synthesized the representatives of C60–bicyclo[2.2.1]heptanes. For this purpose, we first produced the unsubstituted organic hydrazones from various bicyclo[2.2.1]heptane derivatives and then used the organic precursors in the reactions with C60. New homofullerenes and methanofullerenes with one bicyclo[2.2.1]heptane fragment have been obtained under metal-complex catalysis conditions at the fullerene C60:hydrazone molar ratio equal to 1:1.5. If fullerene C60:hydrazone ratio was 1:10, homofullerenes with six bicyclo[2.2.1]heptane fragments were synthesized, which can be isomerized into methanofullerenes when boiling in o-dichlorobenzene.

AI-assisted models to predict chemotherapy drugs modified with C60 fullerene derivatives.

Employing quantitative structure-activity relationship (QSAR)/ quantitative structure-property relationship (QSPR) models, this study explores the application of fullerene derivatives as nanocarriers for breast cancer chemotherapy drugs. Isolated drugs and two drug-fullerene complexes (i.e., drug-pristine C60 fullerene and drug-carboxyfullerene C60-COOH) were investigated with the protein CXCR7 as the molecular docking target. The research involved over 30 drugs and employed Pearson's hard-soft acid-base theory and common QSAR/QSPR descriptors to build predictive models for the docking scores. Energetic descriptors were computed using quantum chemistry at the density functional-based tight binding DFTB3 level. The results indicate that drug-fullerene complexes interact more with CXCR7 than isolated drugs. Specific binding sites were identified, with varying locations for each drug complex. Predictive models, developed using multiple linear regression and IBM Watson artificial intelligence (AI), achieved mean absolute percentage errors below 12%, driven by AI-identified key variables. The predictive models included mainly quantitative descriptors collected from datasets as well as computed ones. In addition, a water-soluble fullerene was used to compare results obtained by DFTB3 with a conventional density functional theory approach. These findings promise to enhance breast cancer chemotherapy by leveraging fullerene-based drug nanocarriers.

Enhancement of Electron Transport Characteristics Using MXene-MnFeO3 Nanocomposite Integration with Fullerene Derivatives for the Perovskite-Based Solar Cells and Detectors.

In this study, we prepared a hybrid film incorporating the MnFeO3-decorated conducting two-dimensional (2D) MXene sheet-suspended [6,6]-phenyl-C61-butyric acid methyl ester (PCBM) electron transfer layer (ETL) for the perovskite solar cells (PSCs) and detectors. The incorporation of MXene-MnFeO3 with the PCBM ETL could drive exceptional conducting features for the PSCs. Moreover, the presence of MXene-MnFeO3 facilitated superior charge transfer pathways, thereby enhancing the electron extraction and collection processes. This enhancement was directed to improve the electron mobility within the device, resulting in high photocurrents. The designed interface engineering with the MXene-MnFeO3 nanocomposite-tuned PCBM ETL has produced a remarkable power conversion efficiency of 17.79% ± 0.27. Moreover, X-ray detectors employing PCBM modulated with the MXene-MnFeO3 ETL achieved notable performance metrics including 18.47 μA/cm2 CCD-DCD, 5.53 mA/Gy·cm2 sensitivity, 7.64 × 10-4 cm2/V·s electron mobility, and 1.51 × 1015 cm2/V·s trap density.

Interpenetrated Donor-Acceptor Heterojunctions in 2D Conjugated Dibenzo[g,p]chrysene-Based Kagome Covalent Organic Frameworks.

Dibenzo[g,p]chrysene can be viewed as a constrained propeller-shaped tetraphenylethylene with reduced curvature and has been utilized to construct dual-pore kagome covalent organic frameworks (COFs) with tightly packed two-dimensional (2D) layers owing to its rigid and more planar structural characteristics. Here, we introduce 2D COFs based on the node 4,4',4″,4‴-(dibenzo[g,p]chrysene-2,7,10,15-tetraphenyl)tetraamine (DBCTPTA) featuring extended conjugation compared to the dibenzo[g,p]chrysene-3,6,11,14-tetraamine (DBCTA) node. We establish two exceptionally crystalline imine-linked 2D COFs with a hexagonal dual-pore kagome structure based on the DBCTPTA core. The newly synthesized thienothiophene (TT) and benzodithiophene (BDT)-based DBCTPTA COFs show a tight stacking behavior between adjacent layers. Furthermore, we obtained an unprecedented, interpenetrated electron-donor/acceptor host-guest system with an electron-donating BDT DBCTPTA COF synthesized in situ with the soluble fullerene derivative [6,6]-phenyl-C61-butyric acid methyl ester (PCBM) serving as molecular acceptor. The BDT DBCTPTA COF@PCBM film shows a much shorter amplitude-averaged PL lifetime of 7 ± 2 ps compared to 30 ± 4 ps of the BDT DBCTPTA COF film, indicating the light-induced charge transfer process. The successful in situ formation of interpenetrated donor-acceptor heterojunctions within 2D COFs offers a promising strategy for establishing D-A heterojunctions in diverse framework materials with open channel systems.

Fullerene Derivatives for Tumor Treatment: Mechanisms and Application.

Fullerenes hold tremendous potential as alternatives to conventional chemotherapy or radiotherapy for tumor treatment due to their abilities to photodynamically kill tumor cells, destroy the tumor vasculature, inhibit tumor metastasis and activate anti-tumor immune responses, while protecting normal tissue through antioxidative effects. The symmetrical hollow molecular structures of fullerenes with abundant C=C bonds allow versatile chemical modification with diverse functional groups, metal clusters and biomacromolecules to synthesize a wide range of fullerene derivatives with increased water solubility, improved biocompatibility, enhanced photodynamic properties and stronger targeting abilities. This review introduces the anti-tumor mechanisms of fullerenes and summarizes the most recent works on the functionalization of fullerenes and the application of fullerene derivatives in tumor treatment. This review aims to serve as a valuable reference for further development and clinical application of anti-tumor fullerene derivatives.

(Invited) Highly Water-Soluble Fullerene Derivatives for Durable Polymer Electrolyte Membrane Fuel Cells

Recently, the focus of proton-exchange membrane fuel cell (PEMFC) applications has shifted from fuel cell vehicles (FCVs) to heavy-duty vehicles (HDVs), necessitating enhanced fuel cell durability. The degradation of carbon-supported metal nanoparticle catalysts and electrolyte membranes are the primary factors responsible for fuel cell durability. Particularly in the context of HDVs, augmenting the chemical stability of electrolyte membranes, such as Nafion, stands as a crucial factor in improving fuel cell lifetime. The degradation mechanism of Nafion is believed to involve the cleavage of polymer chains by OH∙ radicals, formed by crossover hydrogen and crossover oxygen in the presence of trace transition metal ions. A common strategy to mitigate Nafion's chemical degradation involves adding radical quenchers like cerium ion (Ce+) to Nafion. However, Ce+ may migrate out of Nafion during fuel cell operation, leading to a decline in its highly efficient radical quenching ability over extended operational periods.In this study, we demonstrate that a fullerene-derived radical quencher with multiple hydroxy groups significantly contributes to enhancing the durability of Nafion. Our approach involves synthesizing fullerene derivatives with various kind of hydroxy and functional groups for remarkable water solubility to realize their homogeneous dispersion within the Nafion membrane. The abundant functional groups also aid in improving proton conductivity. Moreover, the chelating effect of the spherically distributed functional groups immobilizes themselves, preventing any observed leakage from the Nafion membrane. These fullerene-derivative radical quenchers effectively enhance fuel cell durability and hold promise for future applications in HDVs.This study was supported by the New Energy and Industrial Technology Development Organization (NEDO), Japan (JPNP20003).

Metabolite responses of cucumber on copper toxicity in presence of fullerene C60 derivatives

Copper (Cu) toxicity in crops is a result of excessive release of Cu into environment. Little is known about mitigation of Cu toxicity through the application of carbon-based nanomaterials including water-soluble fullerene C60 derivatives. Two derivatives of fullerene were examined: polyhydroxylated C60 (fullerenol) and arginine C60 derivative. In order to study the response of Cu-stressed plants (Cucumis sativus L.) to these nanomaterials, metabolomics analysis by gas chromatography-mass spectrometry (GC-MS) was performed. Excess Cu (15 μM) caused substantial increase in xylem sap Cu, retarded dry biomass and leaf chlorosis of hydroponically grown cucumber. In Cu-stressed leaves, metabolomes was disturbed towards suppression metabolism of nitrogen (N) compounds and activation metabolism of hexoses. Also, upregulation of some metabolites involving in antioxidant defense system, such as ascorbic acid, tocopherol and ferulic acid, was occurred in Cu-stressed leaves. Hydroponically added fullerene adducts decreased the xylem sap Cu and alleviated Cu toxicity with effectiveness has been most pronounced for arginine C60 derivative. Metabolic responses of plants subjected to high Cu with fullerene derivatives were opposite to that observed under Cu alone. Fatty acids up-regulation (linolenic acid) and antioxidant molecules (tocopherol) down-regulation might indicate that arginine C60 adduct can alleviate Cu induced oxidative stress. Although fullerenol slightly improved cucumber growth, its effect on metabolic state of Cu-stressed plants was not statistically significant. We suggest that tested fullerene C60 adducts have a potential to prevent Cu toxicity in plants through a mechanism associated with their capability to restrict xylem transport of Cu from roots to shoot, and to maintain antioxidative properties of plants.

Organic photovoltaic biomaterial with fullerene derivatives for near-infrared light sensing in neural cells.

Retinal degenerative diseases, which can lead to photoreceptor cell apoptosis, have now become the leading irreversible cause of blindness worldwide. In this study, we developed an organic photovoltaic biomaterial for artificial retinas, enabling neural cells to detect photoelectric stimulation. The biomaterial was prepared using a conjugated polymer donor, PCE-10, and a non-fullerene receptor, Y6, both known for their strong near-infrared light absorption capabilities. Additionally, a fullerene receptor, PC61BM, was incorporated, which possesses the ability to absorb reactive oxygen species. We conducted a comprehensive investigation into the microstructure, photovoltaic properties, and photothermal effects of this three-component photovoltaic biomaterial. Furthermore, we employed Rat adrenal pheochromocytoma cells (PC-12) as a standard neural cell model to evaluate the in vitro photoelectric stimulation effect of this photovoltaic biomaterial. The results demonstrate that the photovoltaic biomaterial, enriched with fullerene derivatives, can induce intracellular calcium influx in PC-12 cells under 630 nm (red light) and 780 nm (near-infrared) laser irradiation. Moreover, there were lower levels of oxidative stress and higher levels of mitochondrial activity compared to the non-PC61BM group. This photovoltaic biomaterial proves to be an ideal substrate for near-infrared photoelectrical stimulation of neural cells and holds promise for restoring visual function in patients with photoreceptor apoptosis.

Non-Fullerene Organic Electron Transport Materials toward Stable and Efficient Inverted Perovskite Photovoltaics.

Inverted perovskite solar cells (PSCs) attract continuing interest due to their low processing temperature, suppressed hysteresis, and compatibility with tandem cells. Considerable progress has been made with reported power conversion efficiency (PCE) surpassing 26%. Electron transport Materials (ETMs) play a critical role in achieving high-performance PSCs because they not only govern electron extraction and transport from the perovskite layer to the cathode, but also protect the perovskite from contact with ambient environment. On the other hand, the non-radiative recombination losses at the perovskite/ETM interface also limits the future development of PSCs. Compared with fullerene derivatives, non-fullerene n-type organic semiconductors feature advantages like molecular structure diversity, adjustable energy level, and easy modification. Herein, the non-fullerene ETM is systematically summarized based on the molecular functionalization strategy. Various types of molecular design approaches for producing non-fullerene ETM are presented, and the insight on relationship of chemical structure and device performance is discussed. Meantime, the future trend of non-fullerene ETM is analyzed. It is hoped that this review provides insightful perspective for the innovation of new non-fullerene ETMs toward more efficient and stable PSCs.

Novel Sprayable Antioxidative Dressing Based on Fullerene and Curdlan for Accelerating Chronic Wound Healing.

The effective treatment of chronic wounds represents a critical global medical challenge demanding urgent attention. Persistent inflammation, driven by an excess of reactive oxygen radicals, sets in motion a detrimental cycle leading to chronic wounds and impeding the natural healing process. This study develops a sprayable wound dressing by covalently grafting amino fullerene to carboxymethylated curdlan (CMC-C). This novel dressing exhibits excellent biocompatibility, antioxidant, and reactive oxygen species scavenging properties. Furthermore, it demonstrates a targeted affinity for HEK-a cells, efficiently reducing the inflammatory response while promoting cell proliferation and migration in vitro. Moreover, the animal experiment investigations reveal that CMC-C significantly accelerates chronic wounds healing by regulating the inflammatory process, promoting collagen deposition, and improving vascularization. These results demonstrate the potential of the sprayable dressing (CMC-C) in curing the healing of chronic wounds through the modulation of the inflammatory microenvironment. Overall, the sprayable hydrogel dressing based on water-soluble derivative of fullerene and curdlan emerges as a potential approach for clinical applications in the treatment of chronic wounds.

Giant nonlinear optical response of fullerene polymer fragments: a DFT perspective

Organic π-conjugated materials exhibit exceptional nonlinear optical (NLO) properties due to their unique electronic structures, characterized by short response times and large NLO responses. Fullerene (C60) is one of the few polymer species that possess a rich π-conjugated system, making it a promising material with significant NLO responses. In the present paper, we designed three C60 polymer fragments and employed density functional theory to estimate their molecular static first and second hyperpolarizabilities. Compared to previously reported fullerene derivatives, the designed C60 polymer fragments can exhibit notable second-order and third-order molecular NLO responses. The study shows that the hyperpolarizabilities and energy gaps of the investigated C60 polymer fragments are greatly influenced by their topological structures and bonding modes. These findings provide new insights for the design of novel NLO materials based on C60 polymers, and the realization of tunable NLO responses in C60 cluster-based molecular systems, which may have significant applications in nanophotonic devices.

Hierarchical Self-Assembly of Water-Soluble Fullerene Derivatives into Supramolecular Hydrogels.

Controlling the self-assembly of nanoparticle building blocks into macroscale soft matter structures is an open question and of fundamental importance to fields as diverse as nanomedicine and next-generation energy storage. Within the vast library of nanoparticles, the fullerenes-a family of quasi-spherical carbon allotropes-are not explored beyond the most common, C60. Herein, a facile one-pot method is demonstrated for functionalizing fullerenes of different sizes (C60, C70, C84, and C90-92), yielding derivatives that self-assemble in aqueous solution into supramolecular hydrogels with distinct hierarchical structures. It is shown that the mechanical properties of these resultant structures vary drastically depending on the starting material. This work opens new avenues in the search for control of macroscale soft matter structures through tuning of nanoscale building blocks.

Enhancing moisture resistance in p-i-n perovskite solar cells: utilizing fullerene derivatives as advanced electron transport materials

Enhancing moisture resistance in p-i-n perovskite solar cells: utilizing fullerene derivatives as advanced electron transport materials

Synthesis of indano[60]fullerene thioketone and its application in organic solar cells.

Evaporable indano[60]fullerene ketone (FIDO) was converted to indano[60]fullerene thioketone (FIDS) in high yield by using Lawesson's reagent. Three compounds with different substituents in para position were successfully converted to the corresponding thioketones, showing that the reaction tolerates compounds with electron-donating and electron-withdrawing substituents. Computational studies with density functional theory revealed the unique vibrations of the thioketone group in FIDS. The molecular structure of FIDS was confirmed by single-crystal X-ray analysis. Bulk heterojunction organic solar cells using three evaporable fullerene derivatives (FIDO, FIDS, C60) as electron-acceptors were compared, and the open-circuit voltage with FIDS was 0.16 V higher than that with C60.

Non-covalent complexes of polycationic/polyanionic fullerene C60 derivatives with cyanine dyes: Spectral properties and superoxide generation under NIR light irradiation

Polycationic/polyanionic fullerene C60 derivatives and heptamethine cyanine dyes IR780, IR783, IR806, IR820 and piperazine-substituted derivative of IR780 dye form complexes through an electrostatic interaction in aqueous solutions. The fluorescence of the dye is strongly quenched in such complexes, and they efficiently generate superoxide anion-radical under near-infrared (NIR) irradiation due to the photoinduced electron transfer from the photoexcited dye to the fullerene core. The superoxide generation efficiency under NIR light irradiation increases 52 times for the IR783−(polycationic fullerene derivative) complex compared to the native dye. The demonstrated results show promising potential of such [cyanine dye]−fullerene structures as new NIR type I photosensitizers for the photodynamic therapy.