Depositional Processes Research Articles

The late Quaternary glacial depositional environment at Filey Bay, eastern England: Accretionary mechanisms for thick sequences of tills and stratified diamictons

Construction of the Holderness/Flamborough Head moraine belt on the East Yorkshire coast, England, records the oscillatory onshore flow of the North Sea Lobe of the British-Irish Ice Sheet from ~25.8 to ~19.7 ka BP, during which time a thick sequence of multiple diamictons and associated stratified sediments were emplaced. The sedimentology of a >40 m thick stratigraphy through the moraine belt at Filey Bay, in combination with local borehole records, is used here to reconstruct the depositional processes associated with glacier ice moving ca., 12 km onshore and damming the mouth of the Vale of Pickering, which resulted in the accumulation of an unusually thick and complex sequence of deposits traditionally classified as the “Filey till”. The base of the sedimentary sequence comprises stratified diamictons, which are interpreted as glacilacustrine deposits emplaced predominantly by sediment gravity flows in an ice-contact ‘mud apron’ on the distal slope of a subaqueous push ridge constructed in the earliest proglacial lake in Filey Bay; a vertical increase in coarse-grained lithofacies records increasing glacier proximity. Glacier overriding of the mud apron is recorded by a stacked sequence of tills that interdigitate with lake sediments inland. A zone of till-lake sediment interdigitation migrated first westward during North Sea Lobe advance and then eastward during its retreat, into and out of Glacial Lake Pickering, respectively. Multiple tills and intra-till stratified beds and lenses at the top of the sequence at Filey represent alternating deforming bed-sliding bed facies (subglacial traction tills and subglacial canal fills) associated with the construction of inset push moraines, constructed by sub-marginal incremental thickening or punctuated aggradation. This depositional scenario addresses the problems arising from genetic classifications of substantial accumulations of glacigenic diamictons as ‘till’ when modern analogues indicate only modest thicknesses of subglacial traction till beneath glaciers. Onshore thickening of glacigenic deposits through subaqueous push moraine construction and mud apron progradation is compatible with glacier surging behaviour, but not necessarily solely diagnostic of a surging North Sea Lobe during the last glaciation.

Constructing Rainfall Threshold for Debris Flows of a Defined Hazardous Magnitude

Debris flow can cause damage only when its discharge exceeds the drainage capacity of the prevention engineering. At present, most rainfall thresholds for debris flows mainly focus on the initiation of debris flow and do not adequately consider the magnitude and drainage measures of debris flows. These thresholds are likely to initiate numerous warnings that may not be related to hazardous processes. This study proposes a method for calculating the rainfall threshold that is related to a defined level of debris flow magnitude, over which certain damage may be caused. This method is constructed by using the transient rainfall infiltration analysis slope stability model (TRIGRS) and the fluid dynamics process simulation model (MassFlow). We first use the TRIGRS model to analyze slope stability in the study area and obtain the distribution of unstable slopes under different rainfall conditions. Afterward, the MassFlow model is employed to simulate the movement process of unstable slope units and to predict the depositional processes at the mouth of the catchment. Lastly a rainfall threshold is constructed by statistically analyzing the rainfall conditions that cause debris flows flushing out of the given drainage ditch. This method is useful to predict debris flow events of a hazardous magnitude, especially for areas with limited historical observational data.

Numerical Modeling of Potential Large Wood Entrainment in Rivers: Application of Hybrid Modeling in the Inter‐Dam Reach of the Dyje River, Czechia

AbstractMobilization of large wood in river channels during floods represents a hazardous factor, augmenting flood risk and endangering infrastructures such as bridges, weirs, and reservoir dams. A hybrid modeling approach combining numerical models with field‐based surveys has been recently used to elucidate the processes of LW entrainment and deposition in rivers. We used two‐dimensional hydraulic modeling performed in HEC‐RAS to simulate LW entrainment in two valley bottom segments of the Dyje River, Czechia, where LW deposition is a significant hazard to the dam of the downstream Znojmo reservoir. We surveyed all LW pieces in the inundation area of the 2002 extreme (>Q100) flood and simulated their entrainment for eight flood scenarios (1–100‐year recurrence interval). We used the equations of Braudrick and Grant (2000, https://doi.org/10.1029/1999WR900290) to calculate the LW entrainment threshold; we introduced coefficient k accounting for the incomplete submersion of LW pieces resting on an inclined surface into the original equations. Four entrainment categories — stable, wetted stable, wetted buoyant, and wetted entrained — were defined, and the proportion of LW pieces in each category was calculated for the flood scenarios. We found marked differences in entrainment categories for respective flood scenarios between the two valley segments. These were attributed to the differences in pieces' dimensions, their spatial distribution within the inundation area, and valley‐bottom topography, which affects the hydraulic conditions for a given discharge. The presented approach enables the calculation of the LW quantity potentially mobilized by the flood of a certain magnitude indicating the degree of potential risk for the infrastructures located downstream.

Coupling morphometric analysis and soil erosion modeling for the characterization of the geomorphological setting in the surrounding of the archaeological site of Chimtou (Central Medjerda Valley, Tunisia)

ABSTRACT This study focuses on the characterization of the geomorphological setting in the hinterland of the archaeological sites of Chimtou and Bordj Hellal located in the central Medjerda Valley, North Tunisia. Our approach integrates the algorithm Geomorphons for semi-automatic landform classification with the soil erosion model Unit Stream Power-based Erosion Deposition (USPED), providing information on the intensity and regional distribution of erosional and depositional processes. Data from geomorphological field mapping provide a database for a ground-truth of the semi-automatic landform classification derived by the algorithm Geomorphons and complemented the database for the creation of a detailed map of the geomorphology in the hinterland of Chimtou. In line with the delineation of the spatial distribution of erosional and depositional processes, the results deepen the understanding of the geomorphology and the sediment routing of this region.

Nature and Distribution of Beach Ridges on the Islands of the Greater Caribbean

Beach ridges originate from various depositional processes and occur in a variety of settings. This paper assesses their nature and distribution on the islands of the Greater Caribbean based on a literature review and the identification of sites using Google Earth© 7.3 imagery. The morphological and orientation parameters were measured for each site, and a measure of storm density was developed. These were statistically analysed to develop a classification of beach ridge types. The results show a diversity of beach ridge systems, in terms of setting, morphology, composition and preservation. The presence or absence of an adjacent coral reef is a major differentiating element at the regional level. A regional beach ridge plain classification is proposed, including two main classes, marine beach ridges and river-associated beach ridges, with further sub-divisions based on exposure to hurricanes or hurricanes plus swell waves.

First evidence of Pinaceae and Fagaceae in the fossil wood record of the České středohoří Mts. (Czech Republic): A comprehensive study of fossiliferous sites in pyroclastic rocks surrounding the late Oligocene Milá stratovolcano

A comprehensive anatomical and mineralogical study of fossil wood fragments from fields in the vicinity of Bečov and Břvany villages (NW Bohemia, Czech Republic) indicates that Taxodioxylon gypsaceum (Cupressaceae s.l.) predominates, but also identifies another coniferous wood: Pinuxylon parryoides (Pinaceae) and three angiosperms Quercoxylon böckhianum, Castanoxylon bavaricum and Lithocarpoxylon sp. (all Fagaceae). This paper therefore presents the first occurrence of Pinaceae and Fagaceae fossil wood in the volcanic rocks of the České Středohoří Mts. as well as its youngest palaeobotanical record in general, late Oligocene in age (26.56 ± 0.38 Ma). The samples were buried by alkaline pyroclastic deposits and were mineralized by carbonates. Two distinct depositional processes burying the fossil woods were identified. Closer to the vent, the woods occur in a near-vent pyroclastic fall deposits of the former pyroclastic cone, whereas more distant sites consist of pyroclastic flow deposits. Carbonate mineralization mostly consists of dolomite, but subordinate amounts of magnesite (likely the first time this is documented in fossil wood) as well as calcite and siderite are present. Only one sample collected in the same area, bearing clear signs of riverbed transport (Lithocarpoxylon sp.), was perfectly silicified, but its origin remains unclear.

The indicative significance of grain size end-members and quartz surface microtextural features in Beglitsa loess sections at the Sea of Azov

The loess accumulation processes in the Azov Sea region leaves a record of atmospheric circulation trends in southern Russia, which can be used to explore aeolian dynamics and atmospheric circulation evolution. However, the historical aeolian transportation and accumulation processes of the loess deposits in this region remain controversial, which limits our understanding of aeolian dust dynamics. In the present study, based on grain size analysis and scanning electron microscopy imaging, grain size end-member and microtextural characteristics of loess sediments in the Beglitsa section of the Sea of Azov were studied to reveal their sedimentary environments and processes. According to the results, the Beglitsa section exhibits typical characteristics of aeolian sediment. EM analysis revealed that the Sea of Azov loess is composed of materials from both distant and proximal sources transported by high-altitude westerly and mesoscale regional winds, respectively. Particle shape and morphology indicated that the Azov loess materials have experienced wind and flow action. The application of the two methods revealed that the formation of the Azov loess is a complex process from source to sink. It results from the combined effects of high-altitude westerly winds, low-altitude local wind systems, and near-surface air flow in the course of development, which is also influenced by sea-level rise and fall. The results of the present study lay a foundation for the interpretation of historical aeolian dynamics and environmental significance of the Azov loess.

A review of large wood dynamics relevant to hazard characteristics for built structures

Large wood exerts an influence on the topography and geomorphology of channels in areas of good vegetation development, and it is also an important component of riverine ecosystems. However, large wood may impact and damage buildings. The formation and failure of logjams can cause backwater rise, local scour, and the amplification of flow discharge, leading to more serious disasters. Therefore, quantifying the processes of large wood recruitment, entrainment, transport, deposition, accumulation and logjams failure is highly significant for the prevention of large wood hazards in channels. Based on existing research on large wood, this review provides a comprehensive analysis of large wood dynamics and hazards. First, the processes involved in large wood recruitment, entrainment, transport, and deposition are reviewed. Second, the results of large wood accumulation probability and the backwater rise, local scour, critical conditions of logjams failure and magnitude amplification of the flow discharge caused by large wood are analyzed comprehensively. Finally, large wood-related hazard mitigation measures are also introduced. Future research directions to improve the mitigation of hazards from large wood should concentrate on exploring quantification models for understanding how large wood impacts and accumulates on various built structures.

Enhancing solids deposit prediction in gully pots with explainable hybrid models: A review.

Urban flooding has made it necessary to gain a better understanding of how well gully pots perform when overwhelmed by solids deposition due to various climatic and anthropogenic variables. This study investigates solids deposition in gully pots through the review of eight models, comprising four deterministic models, two hybrid models, a statistical model, and a conceptual model, representing a wide spectrum of solid depositional processes. Traditional models understand and manage the impact of climatic and anthropogenic variables on solid deposition but they are prone to uncertainties due to inadequate handling of complex and non-linear variables, restricted applicability, inflexibility and data bias. Hybrid models which integrate traditional models with data-driven approaches have proved to improve predictions and guarantee the development of uncertainty-proof models. Despite their effectiveness, hybrid models lack explainability. Hence, this study presents the significance of eXplainable Artificial Intelligence (XAI) tools in addressing the challenges associated with hybrid models. Finally, crossovers between various models and a representative workflow for the approach to solids deposition modelling in gully pots is suggested. The paper concludes that the application of explainable hybrid modeling can serve as a valuable tool for gully pot management as it can address key limitations present in existing models.

Evolution of the hydrothermal ore-forming system of Ashele VMS-type Cu-Zn deposit in Xinjiang, NW China: Insights from mineralogy and geochemistry of sulfides

The Ashele Cu-Zn deposit is one of the largest and most typical VMS-type Cu-Zn deposits in the Chinese Altai Mountains, Central Asian Orogenic Belt. The ore-forming processes of the Ashele deposit remains elusive, with particular uncertainties surrounding the physicochemical conditions underpinning their formation. In this study, major and trace element concentrations of the two types of sphalerite and sulfide sulfur isotopic compositions have been analyzed to constrain the mineralization conditions and ore genesis. Two stages of sphalerite have been identified, i.e., euhedral sphalerite of the early Cu mineralization stage (Sp1) and anhedral sphalerite of the late Zn mineralization stage (Sp2). Results show that Sp1 has relatively higher contents of In, Cu, Sn, and Hg, but lower levels of Cd, Ga, Ge, As, and Ag compared to that of Sp2. Utilizing the sphalerite GGIMFis geothermometer, mineralization temperatures for Sp1 and Sp2 were estimated at 225-296°C (average 258°C) and 166-264°C (average 210°C), respectively. Additionally, the Ashele sphalerite geochemistry suggests a relatively high sulfur fugacity during ore formation (lgfS2 = −8.99 to −6.55 for Sp1 and −13.58 to −6.83 for Sp2). The findings suggest an evolutionary trend of ore-forming fluids, characterized by a decrease in both temperature and sulfur fugacity from the early Cu mineralization stage to the later Zn mineralization stage. In situ δ34S values of sulfides (sphalerite, chalcopyrite, and pyrite) range from 0.84 ‰ to 6.07 ‰, indicating a sulfur origin from the thermochemical reduction of seawater sulfate and leaching of the underlying volcanic rocks, with a minor contribution from direct gas release from shallow magma chambers. Overall, this work unravels the physicochemical transformation between the two identified mineralization stages, thereby enhancing the understanding of the ore-forming process of the Ashele deposit.

The source and ore-forming processes of post-collisional Qulong porphyry Cu-Mo deposit in Tibet constrained by Mo isotopes

Porphyry deposits supply most of the world's Cu and Mo resources. Most porphyry deposits are developed in magmatic arcs above subduction zones. However, abundant Miocene porphyry Cu-Mo deposits have been found in the post-collision stage in Tibet, more than ∼30 Myr after the Indian-Eurasian continental collision. The magma source and the enrichment process of ore-forming elements for these post-collision porphyry deposits remain controversial. Here, we present Sr-Nd-Mo isotope compositions of a suite of mineralized and barren igneous rocks from the Rongmucuola pluton in the Miocene post-collisional Qulong porphyry Cu-Mo deposit in Tibet to reveal their magma sources and ore-forming processes. Our results indicate that the mineralized and barren igneous rocks in the Qulong deposit were derived from a cogenetic source with similar Sr-Nd isotope compositions (87Sr/86Sr(i) = 0.7049–0.7050 and εNd(t) = −0.24 to 0.20). However, the mineralized igneous rocks have large variations in δ98/95Mo values (−0.30‰ to 0.74‰; relative to NIST SRM 3134) and Mo/Ce ratios (0.01 to 4.84) compared to those of the barren igenous rocks (δ98/95Mo = −0.74‰ to −0.02‰; Mo/Ce = 0.01 to 0.04). In combination with the higher LOI values, Mo/Ce and Cs/Ta ratios and Cu concentrations and lower Ce/Pb ratios of the mineralized igneous rocks relative to the barren igneous rocks, we propose the mineralized igneous rocks were affected by ore-forming hydrothermal fluids originated from the exsolution of later co-genetic magmas, which significantly changed the isotopic and elemental compositions of intrusions and resulted in Mo mineralization. The fluid-rock interaction modeling supports this interpretation and successfully reproduce the observed δ98/95Mo and Mo/Ce compositions of mineralized igneous rocks. Our study indicates that the exsolved magmatic-hydrothermal fluids have heavy Mo isotopes, and the fluids with a slightly heavier Mo isotope composition have the greatest potential for mineralization. As the water-rock reaction progresses, leading to the precipitation of Mo-rich minerals, ore-forming fluids with a heavier Mo isotope composition may not have significant mineralization potential. This highlights that Mo isotope system is an effective tool to study the ore-forming processes of porphyry deposits.

Appraisal of active tectonics in Karangsambung Amphitheater: Insights from DEM-derived geomorphic indices and geological data

The morphology of the Karangsambung area shows a unique form, namely the morphology of the amphitheater. This area results from the complexity of tectonic, erosion, and depositional processes. The active tectonics in this region greatly influence the drainage system and geomorphic expression. The study area provides evidence of subduction in Java. It is an ideal natural laboratory for studying evidence of tectonic activity due to the subduction of the Indo-Australian plate with the Eurasian plate during the Cretaceous period. We evaluated active tectonics using the DEM to assess the characteristics of the geomorphic index. The results obtained from these indices were combined to produce an index of relative active tectonics (IRAT) using GIS. The average of the seven geomorphic indices measured was used to evaluate the distribution of relative tectonic activity in the study area. We defined four classes to determine the relative level of tectonic activity: class 1: very high (1.0 ≤ IRAT < 1.5); class 2: high (1.5 ≥ IRAT < 2); grade 3: moderate (2 ≥ IRAT < 2.5); and grade 4: low (2.5 ≥ IRAT). The results show that the study area was strongly deformed and was influenced by tectonic activity. Landsat imagery, DEM, and field observations also proved the presence of active tectonics in the form of uplift accompanied by high vertical erosion forming pointed hills with narrow valleys, the exposure of Cretaceous-aged rocks, amphitheater morphology, and the uplift of river terraces. The indicative IRAT values were consistent with the relative uplift levels, landforms, and geology.

Importance of eDNA taphonomy and sediment provenance for robust ecological inference: Insights from interfacial geochemistry

AbstractRetrieval of modern and ancient environmental DNA (eDNA) from sediments has revolutionized our ability to study past and present ecosystems. Little emphasis has been placed, however, on the fundamentals of the DNA–sediment associations in environmental settings. Consequently, our understanding of mineralogic controls and geochemical processes that take place on the DNA–sediment interface, and its implications for eDNA taphonomy and provenance, remain extremely limited. Here, we apply interfacial geochemical principles to elucidate how depositional processes and the stability of DNA–sediment associations in different environments can influence our interpretation and identify possible interpretational biases arising from neglecting mineral and geochemical controls on eDNA taphonomy. We use atomic force microscopy to show how interfacial geochemical interactions drive DNA adsorption behavior and we outline how to increase the scope and resolution of ecological interpretations from eDNA by combining mineralogic composition information with experimental adsorption data. We bring the concepts together and propose how to integrate sediment provenance as well as mineralogic and geochemical principles in eDNA taphonomy analysis for improved reconstruction of past ecosystems and monitoring of modern ecosystems from eDNA data. We provide a conceptual understanding of how eDNA taphonomy and sediment provenance can be addressed and further applied to enhance the scope, resolution, and accuracy of modern and past ecological reconstructions based on eDNA data.

Rare Earth Elements in Sediments from the Laptev Sea Shelf: Insight into Sources and Distribution Factors

The study of rare earth elements (REEs) in marine sediments is a powerful geochemical tool for determining depositional processes and sediment provenance, as well as for understanding paleoenvironmental changes. In this context, we present REE, some major and trace elements, grain size, and mineralogy data on surface and core sediments, which were collected in different areas of the eastern Laptev Sea Shelf (LSS; Arctic Ocean). The primary objective of this paper was to assess the principal controlling factors influencing REE concentration and their vertical to lateral distribution. The total REE content (ΣREE) ranged from 139 ppm to 239 ppm within the studied sediment samples, predominantly consisting of silt. The normalized REE distribution patterns, based on North American Shale Composite (NASC) standard, exhibited an enrichment in light REE (LREE) when compared to heavy REE (HREE), which is similar to that in Lena River suspended particulate matter. The primary sources of REEs in the eastern LSS were both the suspended particulate matter from the Lena River and sediments originating from the coastal ice complex. The spatial distribution of REEs was primarily contingent upon the distance from sediment sources and prevailing hydrological conditions and was generally characterized by a decrease in REE concentration seaward. There was a moderate positive correlation between ΣREE and mean grain size in the studied surface sediment. However, this relationship was specific only for surface samples and was not found in the sediment cores, indicating that sediment grain size does not play a significant role in the REE vertical distribution. The strong positive correlation between ΣREE and Al, K, Ti, V, Cr, Zr, Hf, and Th suggests that REEs are hosted by not only heavy but also clay minerals. The vertical fluctuations of LREE/HREE, Eu/Eu*, (La/Lu)N can point at variable dominance of one or another REE source for during sediment accumulation.

Lacustrine rhythmites from the Mulhouse Basin (Upper Rhine Graben, France): a sedimentary record of increased seasonal climatic contrast and sensitivity of the climate to orbital variations through the Eocene-Oligocene Transition

The Eocene-Oligocene Transition (EOT) marks the passage from Eocene greenhouse to Oligocene icehouse conditions. It holds keys to our understanding of the behavior of climate systems under major pCO2 shifts. While the environmental impact of the EOT is rather homogenous in oceans, it is much more heterogeneous on continents. Although little to no changes are recorded in some regions, several EOT studies in western Eurasia suggest an increase in seasonal climatic contrast (e.g., higher amplitude of changes in mean temperature or precipitation), along with a higher sensitivity of the climate to orbital variations. However, these variations remain to be properly documented through changes in sedimentary facies and structures and forcing mechanisms. Here we investigate the depocenter of the Mulhouse Basin (Upper Rhine Graben; URG) revealing a prominent transition from massive mudstones to laminated sediments and varves, alongside the emergence of astronomically-forced mudstone-evaporite alternations. These changes are identified in the distal and proximal parts of the southern URG, where they consist of millimeter-thick mudstone-evaporite couplets and siliciclastic-carbonate couplets. The elemental composition and micro-facies analysis of the laminae show a recurrent depositional pattern consistent with a seasonal depositional process, which suggests that they are varves. We propose that the occurrence of varved sediments, together with the observed orbital cyclicity in the southern URG, reflects an increase in seasonal climatic contrast, and an increase in the sensitivity of climate to orbital variations across the EOT. We show that similar changes were noticed in the Rennes and Bourg-en-Bresse basins, and that of other western Eurasian records for similar climatic conditions. This work emphasizes the potential of high-resolution sedimentary structures to serve as markers of climate change across the EOT.

The effect of groyne field on trapping macroplastic. Preliminary results from laboratory experiments

Macroplastic, a precursor of microplastic pollution, has become a new scope of research interest. However, the physical processes of macroplastic transport and deposition in rivers are poorly understood, which makes the decisions of where to locate macroplastic trapping infrastructure difficult. In this research, we conducted a series of experiments in a laboratory channel, exploring the impact of groynes and flexible artificial vegetation on the floating macroplastic litter. The goal was to investigate the litter paths with different obstruction arrangements, which was done by implementing a particle tracking technique on video recordings from each experimental run. We found that increasing discharge correlated with the number of plastic litter floating into the recirculation zone within the groyne fields, especially if the upstream groyne had an extended length. This produced a strong mixing interface between the main flow and the groyne field, while a vegetation patch added in the same groyne field changed the paths of plastic litter by deflecting the flow. We noticed that during a moderate discharge rate, the litter pieces flowing into the groyne field with the vegetation circulated there for the longest period, and some of them got entangled between floating stems when discharge was at its lowest. This phenomenon points to the conclusion that low flow velocity paired with the presence of vegetation can be a primer for plastic deposition and consequently, its degradation. The insights from the experiment allowed us to recommend a place downstream of an extended groyne as the desirable (efficient) area for installing a plastic trapping infrastructure or conducting plastic cleaning actions.

The Geochemical Characteristics of Trace Elements in the Magnetite and Fe Isotope Geochemistry of the Makeng Iron Deposit in Southwest Fujian and Their Significance in Ore Genesis

The Makeng iron deposit in southwest Fujian is a significant iron polymetallic deposit containing various types of iron ore, including garnet magnetite, diopside magnetite, and quartz magnetite. The metallogenetic type of the deposit has been a subject of debate, particularly in relation to the genesis of magnetite and the source of iron. In situ microanalysis of trace elements in magnetite from different ores shows relatively low levels of V, Ti, Cu, and Zn, with higher concentrations of Ca and Si, indicating the characteristics of a skarn type deposit. The δ57Fe values of the magnetite range from −0.091‰ to 0.317‰. Combining these data, whole-rock iron isotope analyses, including Juzhou and Dayang granites, diabase, and the Lower Carboniferous Lindi Formation sandstone, suggest that Fe in the magnetite primarily originates from granitic pluton, with potential contributions from diabase and the Lower Carboniferous Lindi Formation sandstone. Combined with field work, these results indicate that Makeng iron deposit is a skarn-type magnetite deposit associated with Yanshanian granitic intrusions. Therefore, the initial ore-forming fluid is postulated to be a high-temperature magmatic hydrothermal fluid with high oxygen fugacity. This fluid infiltrates spaces such as interlayer fracture zones between the Upper Carboniferous Jingshe Formation–Middle Permian Qixia Formation carbonate rocks and the Lower Carboniferous Lindi Formation sandstone, resulting in diverse magnetite ores due to metasomatism. The mineralization process of the Makeng iron deposit is basically the same, as it is composed of typical skarn deposits. Magnetite was mainly formed during calcic skarn formation stage, and this process persisted until the initial phase of the retrograde alteration of skarns. In contrast, sulfide minerals, including molybdenite, sphalerite, and galena, precipitated during the quartz–sulfide stage.

Can palaeosols reveal palaeoenvironmental variability of fluvial systems? An example from the upper portion of the Bauru Group (Upper Cretaceous, SE Brazil)

Palaeosols are common in sedimentary successions of continental origin, and notably they comprise the majority of the thickness of some accumulated successions of fluvial origin. Yet, detailed investigation of palaeosols and evaluation of their palaeoenvironmental significance are not routinely undertaken in detail in many sedimentological studies. A careful analysis of palaeosols may, however, reveal that sedimentary units, which appear similar if based solely on the facies analysis, indeed show strongly distinct palaeoenvironmental and depositional characteristics.This is the case of the upper portion of the Bauru Group, a 100–190 m-thick Maastrichtian red sandstone unit of fluvial origin, present over an area of c. 180,000 km2 in south-eastern Brazil. In this study, the palaeosols of this unit, which constitute 25–92 % of the succession by thickness, are used to decipher palaeoenvironmental climate conditions, sediment source areas, and relationships between pedogenic and depositional processes. Through the combined study of macroscopic, micromorphological, and geochemical aspects of the palaeosols and of facies analysis of the deposits, the upper portion of the Bauru Group succession is separated into three sectors: north-western, north-eastern, and south-eastern. Although these three areas are all characterised by similar lithology types and lithofacies, indicative of deposition in alluvial systems, the palaeosol analysis highlights that they were each characterised by different climate, different clastic source areas and different dynamics and interaction of the pedogenic and sedimentary processes. This research reveals the critical significance of the palaeosols for discriminating otherwise apparently similar depositional units.

Characteristics of storm deposits in Wangcun Lagoon on the southern China coast during Typhoon Rammasun

Through study of the 210Pb, sedimentology, geochemistry, and microfossil characteristics of six core samples taken in Wangcun Lagoon on the Guangdong Province coast (China) before and after the passage of Typhoon Rammasun (2014), we determined the modern storm depositional dynamic process and its deposition characteristics. During Typhoon Rammasun, a storm deposit with thickness of 40–70 cm was formed in Wangcun Lagoon. The storm deposit gradually thickened from the entrance to the interior of the lagoon, and from the edge of the tidal channel to the tidal flat, and it showed an obvious three-layered structure. The lowest layer had finer grain size, higher total organic carbon (TOC) and C/N contents, and higher abundance of diatoms. The middle layer had coarser grain size, lower TOC and C/N contents, and lower abundance of diatoms, especially near the entrance and the tidal channel. The upper layer mainly existed in the interior of the lagoon, with finer grain size, higher TOC content, higher (lower) C/N contents in the tidal channel (tidal flat), and the second-highest diatom abundance. The fragmentation rate of diatoms was very high in all storm deposit layers. We believe the most likely explanation for the formation of such storm deposit layers is attributable to special storm dynamic processes that are influenced by tides and storm waves. The erosion maximum was reached when the hydrodynamic force was strongest, and then a fine-grained layer was formed during the sedimentary window that occurred as the hydrodynamic force of the ebb tide weakened. Later, part of the fine-grained matter was resuspended under the sub-strong dynamic environment of the subsequent flood tide. Finally, as the hydrodynamic force of the storm weakened further, two layers that were coarser at the bottom and finer at the top were formed. The numbers of storm sediment sequences depend on whether there are multiple sedimentary windows in which sediments can be retained. Storm deposits can be recorded continuously and completely in a lagoon, different from event sedimentary records, and they have specific sedimentological, geochemical, and microfossil characteristics.

Event-scale suspended sediment fluxes in a dryland environment valley-bottom wetland: Implications for downstream sediment and phosphorous fluxes

Suspended fine sediment in rivers and small streams contributes to fluvial pollution loads because of its association with anthropogenically introduced heavy metals, pesticides / herbicides, and nutrients, including phosphorous (P). By acting as sinks for suspended sediment, wetlands located along drainage lines have considerable potential in reducing downstream sediment and nutrient fluxes. The aim of this research was to document downstream sediment fluxes within a single valley-bottom wetland to establish the effectiveness of this common wetland type in retaining P attached to sediment. The study was accomplished by conducting a topographic survey (dGPS and 0.5 m Lidar-derived DEM) with surface and sub-surface sediment sampling to establish long-term (decades to centuries) processes of erosion and deposition within the wetland, as well as consider storage of P. This was paired with event-based suspended sediment sampling at eight positions within the wetland over a wet season, as well as time-averaged suspended sediment sampling at a seasonal-scale at the wetland inlet and outlet. Sediment samples were characterised in terms of organic content, total phosphorous and particle size, which were determined using loss-on-ignition, ICP-AES following aqua regia extraction, and a combination of dry sieving and settling, respectively.Over the wet season, average suspended sediment concentrations increased to a maximum value of 0.26 g.L−1 and then declined, potentially because of the exhaustion of locally available sediment. The total P concentration of incoming sediment was 2174 mg/kg compared to 800 mg/kg at the wetland outlet. However, when considering the seasonal flux for the single year sampled, it was found that the wetland was a net downstream contributor of sediment (11 g of sample were retained at the inlet, relative to 19 g at the outlet). Despite this, the wetland retained ∼37 % of the total P supplied to it from upstream sources, with the remainder passing through the wetland as a result of sediment reworking in reforming channels. Thus, while wetlands may be effective at retaining some sediment and nutrients, they are not an alternative to more formal water treatment works.