Depositional Processes Research Articles

Integrating CoDA and PCA for enhanced characterization of fluvial depositional processes: a case study of the Shendi formation, Sudan

Traditional approaches to fluvial sedimentary analysis often face challenges in deciphering complex, multivariate datasets. This study combines compositional data analysis (CoDA) with principal component analysis (PCA) to enhance the characterization of depositional processes and sub-environments within the Shendi Formation. The PCA applied to centered log ratio (clr)-transformed grain size distributions, reveals three principal components with ~ 91.86% of the data variance explained, representing distinct processes: bedload-dominated channel-bar dynamics, overbank deposition, and high-energy flood events. Specific lithofacies associations strongly correlate to each principal component. This integrated approach enables the identification of subtle yet significant patterns within the complex sedimentological record. The Shendi Formation exhibits characteristics of a dynamic fluvial setting with variations in flow energy, channel migration, and periodic flooding. Our findings demonstrate the power of CoDA-PCA in refining the understanding of fluvial depositional systems and highlight its potential for broader applications.

Random and time-persistent depositional processes in turbidite successions: an example from the marine deep-water Aoshima Formation (Neogene, Kyushu Island, southwest Japan)

ABSTRACT The deposits of flood- and earthquake-derived subaqueous sediment gravity flows represent a significant fraction of lacustrine and deep-sea sedimentary successions, thus providing a valuable record of such natural disasters. The magnitude of these events and the thickness of the associated deposits are considered to follow a lognormal or power-law frequency distribution, whilst that of time intervals between subsequent events appear to be best approximated by a Poisson model, indicative of a random, time-independent phenomenon. However, the debate on whether the sedimentary record of these natural disasters is governed by randomness alone or whether there is some underlying stratigraphic ordering is still unsettled and requires detailed time-series analysis. This study consists of a time-series analysis of mudstone- and sandstone-dominated turbidite successions offshore a fan-delta system in the Neogene Aoshima Formation that belongs to the sedimentary fill of the forearc basin of southwest Japan. The formation consists of a monotonous alternation of very fine- to medium-grained sandstones capped by hemipelagic mudstones and, more rarely, by turbidite mudstones. The results show that the autocorrelation function of the time series suggests quasi-periodic variability in the upper sandstone-dominated part, whereas the lower mudstone-dominated part shows a white-noise-like pattern. Rescaled range analysis shows that the number of events per unit time in the lower part is characterized by a random time series, such as Brownian noise with a Hurst exponent of 0.5. In contrast, the thickness of event beds of the lower part and the thickness and the number of events of the upper part are persistent time series with a Hurst exponent > 0.5. These results suggest that the number of turbidite depositional events in the mudstone-dominated part indicates random timing, whereas its thickness time series and the sandstone-dominant part are not governed by simple stochastic processes but are affected by sea-level changes, sediment transport dynamics, and other factors such as, for example, seafloor topography.

Transport and deposition of the 39.8 ka Campanian Ignimbrite large-scale pyroclastic density currents (Italy)

Processes of transport and deposition of large-scale pyroclastic density currents, which transport 102−103 km3 of material, are still poorly understood. The volcanic explosivity index (VEI) 7 Campanian Ignimbrite pyroclastic density current is one such poorly understood case that is subject to lively scientific debates about its origin and processes. The Campanian Ignimbrite is related to the 39.8 ka eruption that formed the partly submarine and active Campi Flegrei caldera in Italy. The related pyroclastic density current extended over an area of more than 6000 km2 on land around the caldera, with a final runout of ∼75 km, and surmounted mountain ridges higher than 1000 m above sea level, even at distal reaches. We used physical characteristics of the ignimbrite to understand the transport and emplacement dynamics of the Campanian Ignimbrite pyroclastic density current. Thickness, mass, and clast-size distributions across paleotopography were used to infer that the main transport system was a dilute, density-stratified pyroclastic density current, which was at least 1.5 km thick, which was short-lived (possibly as short as ∼20 min), and which had a mass flow rate of ∼1011 kg/s. At its base, high-concentration undercurrents formed and interacted with the rough paleotopography, laying down a low-aspect-ratio ignimbrite sheet when on flat plains, but generating back-flows from ridges and channeling in paleovalleys. The deposit is predominantly a massive valley-pond ignimbrite facies, even across rough mountain terrains. The absence of veneer facies on steep slopes reflects the near-Newtonian rheology of the undercurrents, interpreted as fluidized dense granular flows. This work advances the interpretations of pyroclastic density current deposits, which do not necessarily directly reflect conditions in the transport system.

STUDYING THE INFLUENCE OF NEW COMBINED INHIBITORS ON THE PROCESSES OF CORROSION AND SALT DEPOSITION IN OIL-FIELD EQUIPMENT

Aggressive salts contained in formation waters accelerate the processes of corrosion and salt deposition in oilfield equipment, which leads to unforeseen accidents, contamination of soil and groundwater with harmful substances, as a result of which the ecological balance of the environment is disrupted. Corrosion and scaling that occur during oil production create difficulties during the operation of wells, and, consequently, increase the cost of produced oil.This article covers the results of studies concerning two compositions developed from technical phosphatide - an emulsion obtained by hydration of vegetable oils, as well as sodium hexametaphosphate, ammophos and polypropylene glycol bottoms. When vegetable oils are treated with water and steam (hydration process), the phospholipids contained in the oils combine with water and are released in the form of precipitates called phosphatide emulsions. Such emulsions consist of 45–75 % water, and the rest is phospholipids in the vegetable oil sediment.Technical phosphatides are a group of esters that contain a phosphoric acid residue associated with an amino alcohol. They are natural surfactants and are non-toxic.Preliminary studies have shown that each of the chemical compounds included in the developed reagents has certain inhibitory properties, but when formulated, these compounds provide a synergistic effect.Based on the results of laboratory studies, it was found that at an optimal concentration of reagents of 200 mg/l, the developed compositions provide protection of equipment from corrosion destruction by 94–95 %, and from scaling by 87–88 %. The developed mixed-type inhibitors at optimal concentrations equally effectively inhibit both cathodic and anodic processes on the electrode.The use of these inhibitors leads to the prevention of steel corrosion in the two-phase oil-electrolyte system, as well as to a significant reduction in the rate of scaling.The proposed new compositions can be used in oil wells and in-field transport systems, as well as in reservoir pressure maintenance systems to protect against corrosion and scale deposits.Field tests of the corrosion inhibitor were carried out in deep pumping wells at the Bibieybatneft oil and gas production department. Tests have shown that as a result of using the inhibitor, the protective effect at a concentration of 200 mg/l was 89–90 %, and the effect of salt deposition was 70 %.

Sedimentology, depositional processes, and sequence stratigraphy of deep lacustrine fine-grained sedimentary rocks in the Lower Oligocene Xiaganchaigou Formation, Qaidam Basin, Northwestern China

Lacustrine deep-water fine-grained sedimentary rocks are characterized by high heterogeneities in lithology and lithofacies stacking patterns, controlled by sediment supply and lake level fluctuation. Despite their vital roles as source and reservoir rocks of unconventional oil and gas play, depositional processes and sedimentary sequence of lacustrine fine-grained sedimentary rocks are poorly understood compared to their extensively studied deep marine counterparts. Here, we studied lithofacies, transportation and depositional processes, depositional environments, and sedimentary cycles of deep-water fine-grained deposits of the Lower Oligocene Xiaganchaigou Formation from cored wells in the western Qaidam Basin. Nine lithofacies that stack repetitively in 6-18 m thick sedimentary cycles are identified based on petrographic observation, geochemical analysis, and scanning electron microscopy. The regressive systems tract of a sedimentary cycle is composed of detrital-rich massive fine sandstone deposited by debris flows and thin-bedded fine sandstone deposited by high-density turbidity currents. The transgressive systems tract is dominated by laminated carbonate-rich mudrock facies deposited by low-density turbidity currents. A complete sedimentary cycle is interpreted to represent a transgressive-regressive cycle controlled by fifth-order lake-level variation. Coarse-grained detrital-rich debrite and high-density turbidite were deposited in the proximal sublacustrine fan and channel during lake-level regression, with sediments mainly supplied by terrigenous siliciclastic input. Carbonate-rich low-density turbidites are deposited primarily in the distal sublacustrine fan during lake-level transgression. Thin-laminated carbonate-rich mudrock facies with high organic matter abundance and well-developed laminae-induced fractures are considered both source rocks and target reservoirs of the upper Xiaganchaigou Formation.

Post-glaciation depositional changes in Wijdefjorden, northern Svalbard, using grain-size end-member modelling

Grain-size end-member (EM) modelling is a robust statistical approach for identifying and quantifying dominant grain-size distributions. This approach provides a novel perspective for understanding the impact of interactions between depositional processes in complex sedimentary environments. This study examines grain-size distributions of six glacimarine sediment cores collected along an NS transect from the continental shelf to the Wijdefjorden system in northern Svalbard. In addition, we integrate grain-size EMs with lithologic and acoustic facies, allowing us to identify three distinct groups of EMs (EM1–3), each closely associated with specific depositional processes: turbid meltwater discharge (EM1), sediment winnowing by bottom currents (EM2), and the deposition of ice-rafted debris in glacimarine conditions and subglacial till (EM3). An analysis of the three EM groups reveals that the glacial retreat during the last deglaciation and the Atlantic Water inflow significantly impacted depositional changes within the Wijdefjorden system. In contrast, a decrease in the Atlantic Water inflow during the late Holocene corresponds to glacial re-advance, resulting in shifts in the depositional environment. This study demonstrates the utility of EM modelling in deciphering complex grain-size distributions and reconstructing different climate-driven depositional processes in glacimarine sediments in Svalbard fjords. This integrated approach enhances our understanding of the intricate interplay among climate change, glacier dynamics, and oceanic forcing in polar fjord environments.

The role of ice-sheet dynamics in the Miocene-Pliocene depositional systems of the Ross Sea, Antarctica

The dynamics of the Antarctic ice sheet (AIS) have profound implications for the evolution of the Antarctic continental margin, global ocean currents, and climate changes. Marine sediments from the Antarctic continental margins recorded the history of the advance and retreat of the AIS. In this study, we present an integrated analysis of the sedimentary characteristics of the Early Miocene to Late Miocene of the Ross Sea by using 2D seismic reflection data and cores from International Ocean Discovery Program (IODP) Expedition 374 Sites U1521, U1522, and U1524. The characteristics of the seismic facies and sediments show that the expansion and grounding of the ice sheets across the continental shelf significantly influenced the depositional processes, leading to increased glacial erosion, the formation of prograding wedges, mass transport deposits (MTDs), and mixed (turbidite-contourite) depositional systems since the Early Miocene. The seaward migration of the continental shelf edge and the steepening of the continental slope were mainly influenced by the glaciation of extreme expansion of the AIS. Marked increases in the prograding wedge and MTD are associated with extensive sediment reworking and deposition at the grounding zones and along the continental slope as a result of ice sheet expansion. The development of the mixed (turbidite-contourite) depositional systems was the result of extensive sediment reworking and deposition by gravity flows and bottom currents on the continental slope and the rise. This research provides new insights into the complexity of the ice sheet and the sensibility of marginal sediments in responding to the past climate changes in Antarctica.

Seismic sequence stratigraphy of Late Albian-Early Turonian successions in SW Iran: Implication for reservoir characterizations and potential for improved reservoir quality prediction

The Late Albian-Early Turonian succession on the Arabian Platform stands out as one of the world's richest hydrocarbon provinces. This study delves into the Seismic Sequence Stratigraphy (SSS) of these successions to unravel reservoir characterization and characterized potential hydrocarbon plays. Utilizing data from five exploration wells, including well logs, selected core data, biostratigraphical information, and chemostratigraphy analysis, alongside a comprehensive 3D seismic volume, enabled the identification of four 3rd-order sequences and multiple 4th-order sequences within the studied successions. Sequence-1 (DS-I), dating back to the Late Albian age, features mudstone and bioclast wackestone in an open marine environment. DS-I is a key sequence, notably witnessing the disappearance of siliciclastic input from west to east in the study area. DS-II (Early Cenomanian) and DS-III (Mid-Cenomanian) were deposited on carbonate platforms with grain-supported facies in shoal and lagoonal depositional environments.A distinct regional unconformity at the Turonian base, evident on seismic sections, aligns with depleted δ18O values on the Cenomanian-Turonian Boundary. The maximum flooding surfaces of DS-I and DS-II are characterized by continuous reflectors with negative amplitude. Furthermore, the lateral grading of reservoir facies and their intercalation with non-reservoir facies within 4th-order sequences suggest that reservoir facies heterogeneity is strongly influenced by depositional processes at this scale. Potential reservoirs, particularly in the Highstand System Tract (HST) of each 3rd sequence, are highlighted, with DC-III's HST standing out, hosting patch reef facies resulting from local tectonic activities and carbonate build-up movements.

End of the Cretaceous

Abstract The Cretaceous ended when the Chicxulub asteroid struck the Yucatán platform, and all deposits and landforms generated are earliest Paleocene in age. Drill core from the Cretaceous-Paleogene (K-Pg) boundary sequence deposited on top of the Chicxulub impact structure's peak ring paired with geophysical data within the crater and other well-preserved marine and terrestrial K-Pg boundary sites provide insight into impact processes and effects on Earth's ecosystems, in terms of extinction and recovery. Key findings as reviewed here: 1) confirmation of acoustic fluidization as a physical principle to explain impact structure formation, 2) importance of the target rock properties and marine setting for impactite depositional processes and drivers of climate change, 3) state of understanding of extinction mechanisms and ecological recovery, and 4) implications for impact generated hydrothermal habitat creation. Areas highlighted for next stages of discovery include: 1) physics and chemistry of impact vapor plumes and ejecta processes, 2) sampling of the K-Pg boundary deposit and impact melt sheet within the central basin of the impact structure, 3) examination of ecosystem recovery in an “Early Ocean” scenario at a range of K-Pg boundary sites, and 4) experiments and observations of impact hydrothermal systems as habitats on Earth and other worlds.

Geohazard features of the north-western Sicily and Pantelleria

ABSTRACT We present maps of geohazard features identified across north-western Sicily and Pantelleria in the framework of the Magic project (MArine Geohazard along Italian Coasts), which involved Italian marine geological researchers in 2007-2013. These seafloor features were recognized using high-resolution bathymetry data and rely on the morphological expression of the seafloor and shallow sub-surface processes. The north-western Sicily is a complex continental margin, affected by morphodynamic, depositional, and tectonic processes. The Egadi offshore is controlled by fault escarpments and alternating retreating and progradational processes. Ustica and Pantelleria submerged edifices show the effect of volcanic activity. The Ustica seafloor is interested in volcanic, tectonic, and gravitational instability processes, while the Pantelleria offshore underwent erosive-depositional processes and the effect of bottom currents. Two levels of interpretation are represented: the physiographic domain at a scale of 1:250.000 and the morphological units and morpho-bathymetric elements at a 1:100.000 scale.

Evaluation of the possibilities of using albumin microspheres for radioaerosol study of the deposition of inhaled substances and mucociliary clearance

The need to study and evaluate the leading protective mechanisms of the respiratory system remains one of the key, but unresolved problems of modern medicine, concerning both radiation hygiene and toxicology, and pulmonology. The model of the respiratory tract presented by the ICRP only partially addresses them, significantly limiting the feasibility and possibilities of its use. The solution of this problem undoubtedly contributes to the improvement of methods of prevention and treatment from the effects of incorporative radionuclides entering by inhalation, as well as methods for diagnosing and treating respiratory diseases aimed at the earliest stages of their pathogenesis, given that the processes of deposition of inhaled substances and lung clearance directly depend both therapeutic and pathogenic effects. This is especially relevant when there is a danger of contamination with radioactive waste, when there is an urgent need to deal with highly pathogenic influence and its consequences. The most informative method for studying the processes of deposition inhalant and mucociliary clearance is radioaerosol. However, due to the circumstances, there are no radiopharmaceuticals that could be used for such a study since the 2000s, which prompted us to carry out this work. At the same time, albumin microspheres labeled with 99mTc are considered potentially suitable, but not studied radiopharmaceuticals in this regard. The aim of the work was to study the aerodynamic properties of albumin microspheres and evaluate the possibilities of their use for radioaerosol study of the processes of deposition of inhaled substances and mucociliary clearance. The aerodynamic properties of albumin micro[1]spheres were studied using optical and scanning electron microscopy by studying their dry dispersion, initial and obtained from its suspension in distilled water, generated by an ultrasonic inhaler according to the developed technology. The results indicated that the dispersible particles were characterized by sphericity, clear boundary differentiation and a relatively homogeneous distribution of particles with a relatively narrow size range (spread 1-2.5 µm) and little conglomeration, as well as a smooth surface. Conclusion. The investigated albumin microspheres are suitable for radioaerosol study of the processes of deposition of inhaled substances and mucociliary clearance.

Identification of the subaerial unconformity, genesis, and distribution in Lower Triassic Baikouquan Formation, Mahu Sag, Junggar Basin, Western China

The genesis of unconformities involves multiple influences on basin formation and evolution, which affects the favorable reservoir and hydrocarbon distribution. Within the Early Triassic Baikouquan Formation in the Mahu Sag of the Junggar Basin, we identified subaerial unconformities (SU), namely SU1 and SU2. SU1 is characterized by regional, irregular valleys, whereas SU2 displays extensive lateral extent with comparatively lower relief. These distinctions stem from detailed analyses involving cores, well data, seismic profiles, and spatial distributions, enriching our understanding of SUs in the Junggar Basin. Key findings from our study include: (1) SU occurrences within the Baikouquan Formation span the falling-stage systems tract (FSST) and expanding system tract (EST), corresponding to relative lake level changes. SU1 emerges during descending lake levels, whereas SU2 develops during rising levels. (2) The extensive uplift of the Junggar Basin's perimeter, driven by the late Hercynian movement, heightened topographic gradient shapes a steeper lake shoreline profile, fostering SU development. Arid paleoclimatic conditions during the Permian-Triassic interval accelerate SU formation in the FSST. (3) SU typically comprises regional compound scour surfaces (RCS) and river intermittent exposure surfaces (IES). Continuous winnowing at RCS led to relatively high primary porosities, IES can develop better secondary porosity with superposed freshwater leaching. The investigation into the subaerial unconformity in the study area holds broader implications for comprehending depositional processes, reservoir distribution, and petroleum prospects, both locally and within a global lake basin context.

Spatial and temporal stable water isotope data from the upper snowpack at the EastGRIP camp site, NE Greenland, sampled in summer 2018

Abstract. Stable water isotopes stored in snow, firn and ice are used to reconstruct climatic parameters. The imprint of these parameters at the snow surface and their preservation in the upper snowpack are determined by a number of processes influencing the recording of the environmental signal. Here, we present a dataset of approximately 3800 snow samples analysed for their stable water isotope composition, which were obtained during the summer season next to the deep drilling site of the East Greenland Ice Core Project in northeast Greenland (75.635411° N, 36.000250° W). Sampling was carried out every third day between 14 May and 3 August 2018 along a 39 m long transect. Three depth intervals in the top 10 cm were sampled at 30 positions with a higher resolution closer to the surface (0–1 and 1–4 cm depth vs. 4–10 cm). The sample analysis was carried out at two renowned stable water isotope laboratories that produced isotope data with the overall highest uncertainty of 0.09 ‰ for δ18O and 0.8 ‰ for δD. This unique dataset shows the strongest δ18O variability closest to the surface, damped and delayed variations in the lowest layer, and a trend towards increasing homogeneity towards the end of the season, especially in the deepest layer. Additional information on the snow height and its temporal changes suggests a non-uniform spatial imprint of the seasonal climatic information in this area, potentially following the stratigraphic noise of the surface. The data can be used to study the relation between snow height (changes) and the imprint and preservation of the isotopic composition at a site with 10–14 cm w.e. yr−1 accumulation. The high-temporal-resolution sampling allows additional analyses on (post-)depositional processes, such as vapour–snow exchange. The data can be accessed at https://doi.org/10.1594/PANGAEA.956626 (Zuhr et al., 2023a).

Geomorphic changes after the 2021 Central European flood in the Ahr Valley by LiDAR-based differences

BackgroundIn July 2021, destructive floods in Western Europe were triggered by enormous precipitation rates related to a low-pressure system named "Bernd." These catastrophic events led not only to major damage to infrastructure, severe economic losses, and the loss of lives but also to significant landscape changes and modifications. Here, we focus, as a case study, on the flood aftermath of the Ahr Valley in Rhineland-Palatinate state in western Germany, as it was one of the most affected and destroyed regions by the flood. We utilize high-resolution Digital Terrain Models (DTMs) based on airborne Light Detection and Ranging (LiDAR) that were taken shortly before and after the flood to investigate insights into geomorphic changes. ResultsBy calculating Digital Terrain Models of Difference (DoD), we are able to quantify volumetric and areal changes caused by erosional and depositional processes for different sites in the Ahr Valley. Due to the morphology of the narrow Ahr Valley, most of the erosion and deposition is located within the deeply incised canyon of the Ahr River. The comprehensive analysis reveals notable morphological modifications throughout the study area, with a calculated erosion/deposition areal ratio of 0.46 and an erosion/deposition volumetric ratio of 0.63. Our findings indicate massive deposition regarding both areal and volumetric. We selected six different locations along the Ahr Valley that showcase distinct aspects of flood-induced fluvial morpho-dynamics. Deposition occurred mainly in point bars and downstream of destroyed artificial levees, in a braided river style.ConclusionOur investigations contribute to an overview and assessment of the morphological response to the destructive flood in the Ahr Valley. The results emphasize the necessity for implementing effective flood management strategies, as most of the urban areas in the Ahr Valley were flooded. Moreover, our results provide valuable insights into the impacted areas, highlighting vulnerable locations for flood-related erosion and deposition. This information could contribute to future mitigation and protection efforts, aiding in the development of comprehensive strategies to minimize the impact of similar events in the future.

Bank strength variability and its impact on the system-scale morphodynamics of the upper Amazon River in Brazil

Large anabranching rivers form channels in sediments of varying strength, resulting from erosional and depositional processes that act over geological time scales. Although bank strength variability is known to affect channel morphodynamics, its impact on the migration of large sand-bed rivers remains poorly understood. We report the first in situ measurements of bank strength from an ∼100-km-long reach of the Solimões River, the Brazilian Amazon River upstream of Manaus. These show that cohesive muds in Pleistocene terraces along the river’s right margin have bank strengths as much as three times greater than Holocene floodplain deposits composing the left bank. Image analysis suggests these resistant outcrops determine channel-bar dynamics: channel widening and bar deposition are inhibited, which lowers planform curvature and reduces erosion of the opposing bank. Planform analysis of the 1600-km-long Solimões River between 1984 and 2021 shows that where the channel is associated with Pleistocene terraces, lower rates of bank erosion and bar deposition are evident. Heterogeneity in bank strength is thus a first-order control on the large-scale morphodynamics of the world’s largest lowland river.

Sedimentary Structures and Petrography of Rocks within Akpoha Area of the Afikpo Basin Southeastern Nigeria; Constraints on Provenance

Sedimentary structures and petrographic studies of Akpoha area in Afikpo/Abakiliki basin  was undertaken in an attempt to understudy and determining constraints  in depositional processes in the area . The major outcrops in the area are alternating succession of sandstones and shales striking in a NE-SW direction primarily as a result of folding due to past orogeny in the area. The sandstone outcrops at Akpoha are highly indurated due to age, compaction and tectonism and occur in ridges within the shale unit. The studied shale outcrops were poorly laminated and low in fossil content.Sedimentary structures identified include;Wavy/ripple lamination, Mud cracks, Parallel lamination and Fissility.The results of the petrographic modal analysis from thin section studies show that  the sandstone consists predominantly of quartz (55 - 64%); feldspar (22 - 30%) and rock fragment (1 – 9%). The sandstones were immature, poorly to moderately sorted with angular to sub-angular grain shapes which gives clear indication of high energy of sediment deposition and short transport history from provenance.The abundance of well preserved sedimentary structures  is an indication of prolong calmness of tectonic/orogenic activities in the area. The fissility observed in shale outcrops and the high induration of the Akpoha sandstones was as a result of compaction from overburden pressure before uplift and exposure.

Constructing Rainfall Threshold for Debris Flows of a Defined Hazardous Magnitude

Debris flow can cause damage only when its discharge exceeds the drainage capacity of the prevention engineering. At present, most rainfall thresholds for debris flows mainly focus on the initiation of debris flow and do not adequately consider the magnitude and drainage measures of debris flows. These thresholds are likely to initiate numerous warnings that may not be related to hazardous processes. This study proposes a method for calculating the rainfall threshold that is related to a defined level of debris flow magnitude, over which certain damage may be caused. This method is constructed by using the transient rainfall infiltration analysis slope stability model (TRIGRS) and the fluid dynamics process simulation model (MassFlow). We first use the TRIGRS model to analyze slope stability in the study area and obtain the distribution of unstable slopes under different rainfall conditions. Afterward, the MassFlow model is employed to simulate the movement process of unstable slope units and to predict the depositional processes at the mouth of the catchment. Lastly a rainfall threshold is constructed by statistically analyzing the rainfall conditions that cause debris flows flushing out of the given drainage ditch. This method is useful to predict debris flow events of a hazardous magnitude, especially for areas with limited historical observational data.

Pyrite geochemical fingerprinting on skarn ore-forming processes: A case study from the Huangshaping W–Sn–Cu–Pb–Zn deposit in the Nanling Range, South China

Pyrite geochemistry has been extensively used to reveal ore-forming processes in diverse ore deposits, but its application in skarn systems is not well understood. The Huangshaping deposit in the Nanling Range (South China) uniquely develops W–Sn–Pb–Zn and Cu–Pb–Zn skarn mineralization systems, and both two systems have formed multi-types of pyrite, which provides a good window to reveal the mineralization histories of different skarn systems using pyrite trace element geochemistry. In the Cu–Pb–Zn system, texturally homogeneous Py1 mainly occurs in calcite veins within the host rock, whereas texturally homogeneous Py2 in the calcite-sulfide stage mainly occurs in skarn orebodies. Py3 in the siderite-sulfide stage replaces Py2 and commonly develops abundant pores or fractures, resembling the “bird's eye” texture. In the W–Sn–Pb–Zn system, Py4 in calcite veins can be divided into the oscillatory-zoned Py4a and irregular Py4b under BSE, and Py4b commonly replaces Py4a as veins or overgrowth. Texturally homogeneous Py5 in the calcite-sulfide stage occurs in skarn orebodies and is replaced by Py6 with a “bird's eye” texture in the siderite-sulfide stage.In the Cu–Pb–Zn system, Py1 may have formed by fluid cooling during its ascent along the hydraulic fractures indicated by its enrichment of Co, Ni, As, Sb, and Tl, whereas Py2 is likely formed under higher temperature and pH conditions caused by intense fluid-rock interactions evidenced by its depletion of Co, Ni, As, Sb, and Tl as well as its enrichment of Zn and Ag. In the W–Sn–Pb–Zn system, Py4b has higher contents of Co, Ni, As, Sb, and Tl than Py4a and similar contents of Ag, Zn, and Mo with Py4a, suggesting that decreasing temperature may have controlled the formation of Py4b. Py5 is featured by the depletion of As, Sb, Tl, and Mo as well as the enrichment of Zn and Ag, indicating that Py5 is likely formed under higher temperature and pH conditions resulting from the intense fluid-rock interactions. Marcasite replaces pyrrhotite and then is replaced by pyrite may be an important precipitation mechanism for pyrite with a “bird's eye” texture (Py3 and Py6) in both two skarn systems at Huangshaping. This study demonstrates that fluid-rock interaction is an important mechanism for sulfide precipitation at Huangshaping, which shows that pyrite geochemistry has good potential to reveal mineralization histories in skarn systems.

Numerical Modeling of Potential Large Wood Entrainment in Rivers: Application of Hybrid Modeling in the Inter‐Dam Reach of the Dyje River, Czechia

AbstractMobilization of large wood in river channels during floods represents a hazardous factor, augmenting flood risk and endangering infrastructures such as bridges, weirs, and reservoir dams. A hybrid modeling approach combining numerical models with field‐based surveys has been recently used to elucidate the processes of LW entrainment and deposition in rivers. We used two‐dimensional hydraulic modeling performed in HEC‐RAS to simulate LW entrainment in two valley bottom segments of the Dyje River, Czechia, where LW deposition is a significant hazard to the dam of the downstream Znojmo reservoir. We surveyed all LW pieces in the inundation area of the 2002 extreme (>Q100) flood and simulated their entrainment for eight flood scenarios (1–100‐year recurrence interval). We used the equations of Braudrick and Grant (2000, https://doi.org/10.1029/1999WR900290) to calculate the LW entrainment threshold; we introduced coefficient k accounting for the incomplete submersion of LW pieces resting on an inclined surface into the original equations. Four entrainment categories — stable, wetted stable, wetted buoyant, and wetted entrained — were defined, and the proportion of LW pieces in each category was calculated for the flood scenarios. We found marked differences in entrainment categories for respective flood scenarios between the two valley segments. These were attributed to the differences in pieces' dimensions, their spatial distribution within the inundation area, and valley‐bottom topography, which affects the hydraulic conditions for a given discharge. The presented approach enables the calculation of the LW quantity potentially mobilized by the flood of a certain magnitude indicating the degree of potential risk for the infrastructures located downstream.

The late Quaternary glacial depositional environment at Filey Bay, eastern England: Accretionary mechanisms for thick sequences of tills and stratified diamictons

Construction of the Holderness/Flamborough Head moraine belt on the East Yorkshire coast, England, records the oscillatory onshore flow of the North Sea Lobe of the British-Irish Ice Sheet from ~25.8 to ~19.7 ka BP, during which time a thick sequence of multiple diamictons and associated stratified sediments were emplaced. The sedimentology of a >40 m thick stratigraphy through the moraine belt at Filey Bay, in combination with local borehole records, is used here to reconstruct the depositional processes associated with glacier ice moving ca., 12 km onshore and damming the mouth of the Vale of Pickering, which resulted in the accumulation of an unusually thick and complex sequence of deposits traditionally classified as the “Filey till”. The base of the sedimentary sequence comprises stratified diamictons, which are interpreted as glacilacustrine deposits emplaced predominantly by sediment gravity flows in an ice-contact ‘mud apron’ on the distal slope of a subaqueous push ridge constructed in the earliest proglacial lake in Filey Bay; a vertical increase in coarse-grained lithofacies records increasing glacier proximity. Glacier overriding of the mud apron is recorded by a stacked sequence of tills that interdigitate with lake sediments inland. A zone of till-lake sediment interdigitation migrated first westward during North Sea Lobe advance and then eastward during its retreat, into and out of Glacial Lake Pickering, respectively. Multiple tills and intra-till stratified beds and lenses at the top of the sequence at Filey represent alternating deforming bed-sliding bed facies (subglacial traction tills and subglacial canal fills) associated with the construction of inset push moraines, constructed by sub-marginal incremental thickening or punctuated aggradation. This depositional scenario addresses the problems arising from genetic classifications of substantial accumulations of glacigenic diamictons as ‘till’ when modern analogues indicate only modest thicknesses of subglacial traction till beneath glaciers. Onshore thickening of glacigenic deposits through subaqueous push moraine construction and mud apron progradation is compatible with glacier surging behaviour, but not necessarily solely diagnostic of a surging North Sea Lobe during the last glaciation.