Depolymerase Enzyme Research Articles

Enhanced degradation of polyhydroxyalkanoates (PHAs) by newly isolated Burkholderia cepacia DP1 with high depolymerase activity.

The contribution of microbial depolymerase has received much attention because of its potential in biopolymer degradation. In this study, the P(3HB) depolymerase enzyme of a newly isolated Burkholderia cepacia DP1 from soil in Penang, Malaysia, was optimized using response surface methodology (RSM). The factors affecting P(3HB) depolymerase enzyme production were studied using one-variable-at-a-time approach prior to optimization. Preliminary experiments revealed that the concentration of nitrogen source, concentration of carbon source, initial pH and incubation time were among the main factors influencing the enzyme productivity. An increase of 9.4 folds in enzyme production with an activity of 5.66U/mL was obtained using optimal medium containing 0.028% N of di-ammonium hydrogen phosphate and 0.31% P(3HB-co-21%4HB) as carbon source at the initial pH of 6.8 for 38h of incubation. Moreover, the RSM model showed great similarity between predicted and actual enzyme production indicating a successful model validation. This study warrants the ability of P(3HB) degradation by B. cepacia DP1 in producing higher enzyme activity as compared to other P(3HB) degraders being reported. Interestingly, the production of P(3HB) depolymerase was rarely reported within genus Burkholderia. Therefore, this is considered to be a new discovery in the field of P(3HB) depolymerase production.

Capsule-Targeting Depolymerase, Derived from Klebsiella KP36 Phage, as a Tool for the Development of Anti-Virulent Strategy

The rise of antibiotic-resistant Klebsiella pneumoniae, a leading nosocomial pathogen, prompts the need for alternative therapies. We have identified and characterized a novel depolymerase enzyme encoded by Klebsiella phage KP36 (depoKP36), from the Siphoviridae family. To gain insights into the catalytic and structural features of depoKP36, we have recombinantly produced this protein of 93.4 kDa and showed that it is able to hydrolyze a crude exopolysaccharide of a K. pneumoniae host. Using in vitro and in vivo assays, we found that depoKP36 was also effective against a native capsule of clinical K. pneumoniae strains, representing the K63 type, and significantly inhibited Klebsiella-induced mortality of Galleria mellonella larvae in a time-dependent manner. DepoKP36 did not affect the antibiotic susceptibility of Klebsiella strains. The activity of this enzyme was retained in a broad range of pH values (4.0–7.0) and temperatures (up to 45 °C). Consistently, the circular dichroism (CD) spectroscopy revealed a highly stability with melting transition temperature (Tm) = 65 °C. In contrast to other phage tailspike proteins, this enzyme was susceptible to sodium dodecyl sulfate (SDS) denaturation and proteolytic cleavage. The structural studies in solution showed a trimeric arrangement with a high β-sheet content. Our findings identify depoKP36 as a suitable candidate for the development of new treatments for K. pneumoniae infections.

Biodegradation of different formulations of polyhydroxybutyrate films in soil.

BackgroundPetroleum polymers contribute to non-degradable waste materials and it would therefore be desirable to produce ecofriendly degradable materials. Biodegradation of polyhydroxybutyrate (PHB) in the presence of oligomer hydrolase and PHB depolymerase gave 3-hydroxybutyric acid which could be oxidized to acetyl acetate. Several bacteria and fungi can degrade PHB in the soil.ResultsBiodegradation of PHB showed a significant decrease in the molecular weight (Mw), number-average molecular weight (Mn) and the dispersity (Mw/Mn) for all the film formulations. Nanofibers of PHB and its composites showed faster degradation compared to other films and displayed complete degradation after 3 weeks. The SEM micrographs showed various surface morphology changes including alterations in appearance of pores, cavity, grooves, incisions, slots and pointers. Such changes were due to the growth of microorganisms that secreted PHB depolymerase enzyme which lead to the biopolymer films degradation. However, PHB nanofibers and its composites films in the presence of TiO2 demonstrated more surface changes with rupture of most nanofibers in which there was a drop in fibres diameter.ConclusionsThe degradation of biopolymers help to overcome some of the pollution problems associated with the use of petroleum polymers. PHB nanofiber and its TiO2 composite were degraded faster compared to other PHB film types due to their three dimensional and high surface area structures. The presence of TiO2 nanoparticles in the composite films slowdown the degradation process compared to PHB films. Additionally, the PHB and its composite films that were prepared from UV treated PHB films led to acceleration of the degradation.Graphical abstractBiodegradation of polyhydroxybutyrate films in soil

Unique lipid anchor attaches Vi antigen capsule to the surface of Salmonella enterica serovar Typhi

Polysaccharide capsules are surface structures that are critical for the virulence of many Gram-negative pathogenic bacteria. Salmonella enterica serovar Typhi is the etiological agent of typhoid fever. It produces a capsular polysaccharide known as "Vi antigen," which is composed of nonstoichiometrically O-acetylated α-1,4-linked N-acetylgalactosaminuronic acid residues. This glycan is a component of currently available vaccines. The genetic locus for Vi antigen production is also present in soil bacteria belonging to the genus Achromobacter Vi antigen assembly follows a widespread general strategy with a characteristic glycan export step involving an ATP-binding cassette transporter. However, Vi antigen producers lack the enzymes that build the conserved terminal glycolipid characterizing other capsules using this method. Achromobacter species possess a Vi antigen-specific depolymerase enzyme missing in S enterica Typhi, and we exploited this enzyme to isolate acylated Vi antigen termini. Mass spectrometry analysis revealed a reducing terminal N-acetylhexosamine residue modified with two β-hydroxyl acyl chains. This terminal structure resembles one half of lipid A, the hydrophobic portion of bacterial lipopolysaccharides. The VexE protein encoded in the Vi antigen biosynthesis locus shares similarity with LpxL, an acyltransferase from lipid A biosynthesis. In the absence of VexE, Vi antigen is produced, but its physical properties are altered, its export is impaired, and a Vi capsule structure is not assembled on the cell surface. The structure of the lipidated terminus dictates a unique assembly mechanism and has potential implications in pathogenesis and vaccine production.

Extracellular Polyhydroxyalkanoate Depolymerase by Acidovorax sp. DP5.

Bacteria capable of degrading polyhydroxyalkanoates (PHA) by secreting extracellular depolymerase enzymes were isolated from water and soil samples collected from various environments in Malaysia. A total of 8 potential degraders exhibited clear zones on poly(3-hydroxybutyrate) [P(3HB)] based agar, indicating the presence of extracellular PHA depolymerase. Among the isolates, DP5 exhibited the largest clearing zone with a degradation index of 6.0. The highest degradation activity of P(3HB) was also observed with depolymerase enzyme of DP5 in mineral salt medium containing P(3HB). Based on biochemical characterization and 16S rRNA cloning and sequencing, isolate DP5 was found to belong to the genus Acidovorax and subsequently named as Acidovorax sp. DP5. The highest extracellular depolymerase enzyme activity was achieved when 0.25% (w/v) of P(3HB) and 1 g/L of urea were used as carbon and nitrogen source, respectively, in the culture media. The most suitable assay condition of the depolymerase enzyme in response to pH and temperature was tested. The depolymerase produced by strain Acidovorax sp. DP5 showed high percentage of degradation with P(3HB) films in an alkaline condition with pH 9 and at a temperature of 40°C.

Identification and characterization of genes, encoding the 3‐hydroxybutyrate dehydrogenase and a putative lipase, in an avirulent spontaneous Legionella pneumophila serogroup 6 mutant

Legionella pneumophila is a pathogen widespread in aquatic environment, able to multiply both within amoebae and human macrophages. The aim of this study was to identify genes differently expressed in a spontaneous avirulent Legionella pneumophila serogroup 6 mutant, named Vir-, respect the parental strain (Vir+), and to determine their role in the loss of virulence. Protein profiles revealed some differences in Vir- proteomic maps, and among the identified proteins the undetectable 3-hydroxybutyrate dehydrogenase (BdhA) and a down-produced lipase. Both Legionella enzymes were studied before and were here further characterized at genetic level. A significant down-regulation of both genes was observed in Vir- at the transcriptional level, but the use of defined mutants demonstrated that they did not affect the intracellular multiplication. A mutant (MS1) showed an accumulation of poly-3-hydroxybutyrate (PHB) granules suggesting a role of bdhA gene in its degradation process. The lipase deduced amino acid sequence revealed a catalytic triad, typical of the 'lipase box' characteristic of PHB de-polymerase enzymes, that let us suppose a possible involvement of lipase in the PHB granule degradation process. Our results revealed unexpected alterations in secondary metabolic pathways possibly linking the loss of virulence to Legionella lack of energy sources.

Application of bacteriophage-borne enzyme combined with chlorine dioxide on controlling bacterial biofilm

Elimination of bacterial biofilm (BF) in a food processing environment is a difficult process because BFs show great resistance against common disinfectants. In this study, a heat-stable polysaccharide depolymerase that can effectively degrade bacterial exopolysaccharide was prepared from the phage infecting Klebsiella. Treatment at 75 °C for 10 min could inactivate the phage entirely, with the titration decreasing from 5.6 × 108 PFU/ml to zero. However, loss of phage enzyme activity was not detected post-treatment. The plate counting showed the phage enzyme could make a rapid decrease in the amount of BF bacteria. The elimination rate approached the maximum (80%) after 4 h of treatment. Enzyme pretreatment could also increase the disinfection effect of chlorine dioxide. Approximately 92% of the BF bacteria were eliminated after treatment with the phage enzyme followed by 30 min of treatment with chlorine dioxide. According to the results of colonies counting and scanning electron microscopy, the phage enzyme could effectively reduce the attachment of bacteria as well as the adhesion of extracellular polymeric substances in the BF. This study has demonstrated that the phage-borne polysaccharide depolymerase enzyme are valuable for eradicating the bacterial BF.

Preparation and Characterization of the Enzymatic Degradation Products of the Exopolysaccharide From Klebsiella K13

Oligosaccharides were prepared from the exopolysaccharide of Klebsiella K13 by enzymatic degradation and characterized. A phage-borne depolymerase enzyme was used to degrade the exopolysaccharide of Klebsiella K13. Bio-Gel P4 and P6 were used to purify the oligosaccharide products. The purified oligosaccharides were characterized by HPLC, mass spectroscopy, infrared spectroscopy, and NMR spectroscopy. The monosaccharide constituents of these enzymatic degradation products include D-glucose, D-galactose, D-mannose, and D-glucuronic acid. It was concluded that a pentasaccharide repeating unit with the following structure, as well as its dimer and trimer, was released from the exopolysaccharide: 3,4-O-(1-carboxyethylidene)-β-D-Galp-(1→4)-α-D-GlcpA-(1→3)-β-D-Manp-(1→4)-α-D-Glcp-(1→3)-D-Glcp

Aeromonas punctataderived depolymerase that disrupts the integrity ofKlebsiella pneumoniaecapsule: optimization of depolymerase production

Formation of dense, highly hydrated biofilm structures pose a risk for public and environmental health. Extracellular polymeric substances encompassing biofilms offer 1000-fold greater resistance as compared to the planktonic cells. Using enzymes as anti-biofouling agents, will improve penetration of antimicrobials and increase susceptibility of biofilms to components of immune system. The challenge of using enzymes derived from unrelated bacteria for the degradation of capsular matrix of Klebsiella pneumoniae has not been dealt in the past. Thus, statistical optimization was done to enhance depolymerase production by Aeromonas punctata, directed against the exopolysaccharide matrix of Klebsiella pneumoniae B5055, capable of substituting the available phage borne depolymerase enzyme. Optimization via central composite design (CCD) resulted in 16-fold enhancement in depolymerase yield (166.65 µmoles ml(-1) min(-1) ) over unoptimized medium. Out of the 19 variables, media composition giving maximum expression levels of the enzyme consisted of 1 mg ml(-1) galactose and ammonium chloride, 1.5 mg ml(-1) each of capsular polysaccharide (CPS) and magnesium sulfate. Tryptic peptide analysis of the purified 29 kDa band by Matrix assisted laser desorption ionization-time of flight (MALDI-TOF) showed a high homology with a protein of unknown function from Aeromonas cavaie Ae398. Further improvements in the enzyme can lead to its successful development as prophylactic and/or a therapeutic agent.

The tail‐associated depolymerase of Erwinia amylovora phage L1 mediates host cell adsorption and enzymatic capsule removal, which can enhance infection by other phage

The depolymerase enzyme (DpoL1) encoded by the T7-like phage L1 efficiently degrades amylovoran, an important virulence factor and major component of the extracellular polysaccharide (EPS) of its host, the plant pathogen Erwinia amylovora. Mass spectrometry analysis of hydrolysed EPS revealed that DpoL1 cleaves the galactose-containing backbone of amylovoran. The enzyme is most active at pH 6 and 50°C, and features a modular architecture. Removal of 180 N-terminal amino acids was shown not to affect enzyme activity. The C-terminus harbours the hydrolase activity, while the N-terminal domain links the enzyme to the phage particle. Electron microscopy demonstrated that DpoL1-specific antibodies cross-link phage particles at their tails, either lateral or frontal, and immunogold staining confirmed that DpoL1 is located at the tail spikes. Exposure of high-level EPS-producing Er. amylovora strain CFBP1430 to recombinant DpoL1 dramatically increased sensitivity to the Dpo-negative phage Y2, which was not the case for EPS-negative mutants or low-level EPS-producing Er. amylovora. Our findings indicate that enhanced phage susceptibility is based on enzymatic removal of the EPS capsule, normally a physical barrier to Y2 infection, and that use of DpoL1 together with the broad host range, virulent phage Y2 represents an attractive combination for biocontrol of fire blight.

Production and Purification of Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) Degrading Enzyme from Streptomyces sp. AF-111

A poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) degrading bacterial strain designated as AF-111 was isolated from sewage sludge sample. The bacterium was identified by 16S rRNA gene sequencing. The results revealed that strain AF-111 showed 99 % similarity with Streptomyces althioticus strain NRRL B-3981 and designated as Streptomyces sp. strain AF-111. An extracellular PHBV depolymerase enzyme was produced under optimized conditions and purified through ammonium sulphate fractionation and column chromatography. The enzyme was purified to homogeneity, indicated by sodium dodecyl sulfate–polyacrylamide gel electrophoresis and molecular weight was found to be approximately 51 kDa. Effect of temperature, pH, metal ions and inhibitors on the PHBV depolymerase activity was determined. The enzyme was stable at wide range of temperature (35–55 °C) and pH (6–8). PHBV depolymerase was stable in the presence of different metal ions except iron and zinc which had inhibitory effect on depolymerase activity. Both ethylenediamine teteracetic acid and phenylmethyl sulphonyl fluoride strongly inhibited enzyme activity which indicates that this enzyme belongs to the serine hydrolase family like other polyhydroxyalkanoate depolymerases. The results show that a depolymerase from strain AF-111 can effectively degrade PHBV, therefore, it can be applied in the process of biochemical monomer recycling.

Thermal treatment of the bacteriophage lysate of Klebsiella pneumoniae B5055 as a step for the purification of capsular depolymerase enzyme

The lytic bacteriophage which produces the hydrolase enzyme capable of depolymerizing exopolysaccharide of Klebsiella pneumoniae and of other bacteria was isolated earlier. In this study, a simple method of depolymerase purification from the phage lysate by dissociating the enzyme from the phage particle was developed. The bacteriophage showed a relatively smaller plaque size surrounded by a wide halo indicating a depolymerase action on the capsular polysaccharide of K. pneumoniae B5055. The depolymerase activity was associated predominantly with the phage particles. Different methods have been used by various researchers to dissociate the enzyme associated with phage particles either by exposure to chemicals or by altering the environmental conditions. In this study, the potential application of thermal treatment of the bacteriophage lysate was evaluated as a step for the purification of depolymerase in comparison to the mild acid treatment method of Rieger et al. (1975). The results showed that the relative thermal stability of phage depolymerase at 60°C for 30min was the basis for harvesting the enzyme leading to disintegration of all phage particles in the lysate. Both thermal and mild acid treatment resulted in comparable enzyme levels, however; mild acid treatment appeared to be cumbersome and cause chemical contamination.

Regulating the molar fraction of 4-hydroxybutyrate in Poly(3-hydroxybutyrate-co-4-hydroxybutyrate) by biological fermentation and enzymatic degradation

The regulation of 4-hydroxybutyrate (4HB) molar fraction in the poly(3-hydroxybutyrate-co-4-hydroxybutyrate) [P(3HB-co-4HB)] of a local isolate Cupriavidus sp. USMAA1020 was attempted by employing a feeding strategy through fed-batch fermentation in 100-L fermenter. The growth of Cupriavidus sp. USMAA1020 was enhanced by frequently feeding carbon and nitrogen at a ratio of 5 (C/N 5) using a DO-stat with cascade mode at 20% (v/v) dissolved oxygen (DO). The feeding of C/N 5 and the use of the DO-stat mode were able to regulate the 4HB composition from 0–67 mol% by sequential feeding of γ-butyrolactone and supplementing oleic acid. A high 4HB molar fraction of 67 mol% with a PHA concentration of 5.2 g/L was successfully obtained by employing this feeding strategy. Notably, enzymatic degradation carried out enhanced the 4HB composition of the copolymer synthesized. PHB depolymerase enzyme from Acidovorax sp. was used to degrade this P(3HB-co-70-mol%4HB) copolymer and the 4HB composition could be increased up to 83 mol%. The degradation process was observed by monitoring the time-dependent change in the weight loss of copolymer films. The percentage of weight loss of solvent-cast film increased proportionally up to 19% within 3 h, whereas salt-leached films showed 90% of weight loss within 3 h of incubation and were completely degraded by 4 h. The molecular weight (M n ) of the films treated with enzyme demonstrated a slight decrease. SEM observation exhibited a rough surface morphology of the copolymer degraded with depolymerase enzyme.

Identification and characterization of the intracellular poly-3-hydroxybutyrate depolymerase enzyme PhaZ of Sinorhizobium meliloti

BackgroundS. meliloti forms indeterminate nodules on the roots of its host plant alfalfa (Medicago sativa). Bacteroids of indeterminate nodules are terminally differentiated and, unlike their non-terminally differentiated counterparts in determinate nodules, do not accumulate large quantities of Poly-3-hydroxybutyrate (PHB) during symbiosis. PhaZ is in intracellular PHB depolymerase; it represents the first enzyme in the degradative arm of the PHB cycle in S. meliloti and is the only enzyme in this half of the PHB cycle that remains uncharacterized.ResultsThe S. meliloti phaZ gene was identified by in silico analysis, the ORF was cloned, and a S. meliloti phaZ mutant was constructed. This mutant exhibited increased PHB accumulation during free-living growth, even when grown under non-PHB-inducing conditions. The phaZ mutant demonstrated no reduction in symbiotic capacity; interestingly, analysis of the bacteroids showed that this mutant also accumulated PHB during symbiosis. This mutant also exhibited a decreased capacity to tolerate long-term carbon starvation, comparable to that of other PHB cycle mutants. In contrast to other PHB cycle mutants, the S. meliloti phaZ mutant did not exhibit any decrease in rhizosphere competitiveness; however, this mutant did exhibit a significant increase in succinoglycan biosynthesis.ConclusionsS. meliloti bacteroids retain the capacity to synthesize PHB during symbiosis; interestingly, accumulation does not occur at the expense of symbiotic performance. phaZ mutants are not compromised in their capacity to compete for nodulation in the rhizosphere, perhaps due to increased succinoglycan production resulting from upregulation of the succinoglycan biosynthetic pathway. The reduced survival capacity of free-living cells unable to access their accumulated stores of PHB suggests that PHB is a crucial metabolite under adverse conditions.

Genetic and biochemical characterization of poly 3-hydroxybutyrate depolymerase from Diaphorobacter sp. PCA039

Diaphorobacter sp. PCA039 secreted a polyhydroxybutyrate (PHB) depolymerase into the culture supernatant when it was cultivated on poly 3-PHB or poly 3-hydroxybutyrate-co-3-hydroxyvalerate [PHB(V)] as the sole carbon source. A PHB(V) depolymerase-encoding gene (phaZd) was cloned by construction of a Fosmid genomic library and degenerate primer screening, and overexpressed in Escherichia coli BL21 (DE3). The nucleotide sequence analysis of this gene revealed that it encoded a protein of 507 amino acids with a calculated molecular mass of 52,247 Da. The deduced amino acid sequence had 70% identity to that of the PHB depolymerase from Commonas strains and consisted a conserved lipase box sequence (G-L-S*40- S-G) in the N-terminal region. Analysis suggested that the protein contains a catalytic domain, a fibronectin type III module as a linker, and a putative substrate-binding domain. Furthermore, transcription detection of the phaZd product indicated that PhaZd is a very important degrading enzyme when PHB(V) served as sole carbon source. Further depolymerase enzyme assay data showed that the optimum temperature and pH for the purified enzyme were 40°C and 8.0, respectively.

Topographical imaging as a means of monitoring biodegradation of poly(hydroxyalkanoate) films

Poly(hydroxyalkanoates) (PHAs) are a class of bacterially-derived polymers that are naturally biodegradable through the action of extracellular depolymerase enzymes secreted by a number of different bacteria and fungi. In this paper we describe the development of topographical imaging protocols (by both scanning electron microscopy; SEM, and confocal microscopy; CM) as a means of monitoring the biodegradation of solution cast films of poly(3-hydroxybutanoate-co-3-hydroxyhexanoate) (P3HB/3HHx) and medium-chain-length (mcl-) PHA. Pseudomonas lemoignei and Comamonas P37C were used as sources for PHA depolymerase enzymes as these bacteria are known to degrade at least one of the polymers in question. SEM revealed the bacterial colonization of the film surfaces while CM permitted the comparative assessment of the roughness of the film surfaces upon exposure to the two bacterial strains. By dividing the total surface area of the film (A′) by the total area of the scan (A) it was possible to monitor biodegradation by observing differences in the topography of the film surface. Prior to inoculation, P3HB/3HHx films had an A′/A ratio of 1.06. A 24-h incubation with P. lemoignei increased the A′/A ratio to 1.47 while a 48- and 120-h incubation with Comamonas resulted in A′/A ratios of 1.16 and 1.33, respectively. These increases in the A′/A ratios over time demonstrated an increase in the irregularity of the film surface, indicative of PHA polymer breakdown.

Isolation and characterization of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) degrading bacteria and purification of PHBV depolymerase from newly isolated Bacillus sp. AF3

The contribution of bacteria, isolated from sewage sludge, towards the microbial degradation of poly (3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) was studied. A microbial consortium was inoculated on mineral salt agar plates containing different concentrations of PHBV as a substrate. The PHBV degraders showed optimum depolymerase production at pH 7.0, 37 °C, and 0.4% substrate concentration during 2–5 weeks of incubation. Additional carbon sources like glucose, fructose, sucrose, lactose and nitrogen sources including yeast extract were used as co-metabolites. The highest degree of degradation of PHBV was observed in the presence of glucose. Among the surfactants, Tween 80, was found to be a good inducer for the release of extracellular depolymerase enzyme as compared to Tween 20. When the PHBV depolymerase activity of isolates present in the consortium was determined separately, it was found that the enzyme activity was higher in case of Bacillus sp. AF3. The purification steps included ammonium sulfate fractionation and gel permeation chromatography on Sephadex G-75. The enzyme has been purified to homogeneity as judged by sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) and molecular weight was found to be approximately 37 kDa.

Adsorption effects of poly(hydroxybutyric acid) depolymerase on chain-folding surface of polyester single crystals revealed by mutant enzyme and frictional force microscopy

Adsorption effects of poly(hydroxybutyric acid) (PHB) depolymerase from Ralstonia pickettii T1 on various polymer single crystals were studied using a catalytically inactive mutant of PHB depolymerase by means of transmission electron microscopy (TEM), atomic force microscopy (AFM), and frictional force microscopy (FFM). Six types of polymer single crystals, poly[( R)-3-hydroxybutyric acid] (P(3HB)), poly[( R)-3-hydroxybutyric acid- co-6 mol% ( R)-3-hydroxyvaleric acid] (P(3HB- co-6 mol% 3HV)), poly[( R)-3-hydroxybutyric acid- co-8 mol% ( R)-3-hydroxyhexanoic acid] (P(3HB- co-8 mol% 3HH)), poly( l-lactic acid) (PLLA), poly( d-lactic acid) (PDLA), and polyethylene (PE), were prepared to examine the influence of an ester bond and stereoregularity of a polymer on the enzymatic adsorption. The numbers of PHB depolymerase enzymes adsorbed on P(3HB) and P(3HB- co-6 mol% 3HV) single crystals were determined as 171 and 183 enzymes/μm 2 by AFM, respectively. AFM observation revealed that the concentration of PHB depolymerase enzymes adsorbed onto PLLA and PDLA single crystals is much higher compared to those on a P(3HB) single crystal, whereas the concentration of enzyme adsorbed onto PE and P(3HB- co-8 mol% 3HH) single crystals is much less. In addition, the single crystals of each polymer were characterized by TEM and FFM before and after enzymatic treatment by mutant for 1 h at 37 °C. The surface properties of P(3HB), P(3HB- co-6 mol% 3HV), and P(3HB- co-8 mol% 3HH) single crystals were changed by the enzymatic adsorption, whereas the internal structures were not affected. On the basis of these results, the properties of the binding domain of PHB depolymerase to polymer chain-folding surfaces have been discussed.

Biofilm susceptibility to bacteriophage attack: the role of phage-borne polysaccharide depolymerase.

Biofilm bacteria Enterobacter agglomerans 53b and Serratia marcescens Serr were isolated from a food processing factory. A bacteriophage (SF153b), which could infect and lyse strain 53b, was isolated from sewage. This has been shown to possess a polysaccharide depolymerase enzyme specific for the exopolysaccharide (EPS) of strain 53b. Using batch culture and chemostat-linked Modified Robbins Device systems it was observed that SF153b could degrade the EPS of a mono-species biofilm (strain 53b) and infect the cells. The disruption of the biofilm by phage was a combination of EPS degradation by the depolymerase and infection and subsequent cell lysis by the phage. Strain Serr biofilms were not susceptible to the phage and the biofilm EPS was not degraded by the phage glycanase, with the result that the biofilm was unaffected by the addition of SF153b phage. Scanning electron microscopy confirmed that specific phage could extensively degrade susceptible biofilms and continue to infect biofilm bacteria whilst EPS degradation was occurring.

Protein organization on the PHA inclusion cytoplasmic boundary

Polyhydroxyalkanoate (PHA) cellular inclusions consist of polyesters, phospholipids, and proteins. Both the polymerase and the depolymerase enzymes are active components of the structure. Recently, proteins associated with these inclusions have been described in a number of bacterial species. In order to further clarify the structure and function of these proteins in relation to polymer inclusions, ultrastructural studies of isolated polymer inclusions were initiated. The surface boundary characteristics of polymer inclusions, produced by several genera of bacteria, two different Pseudomonas putida deletion mutants and by Escherichia coli recombinants, were examined. The recombinant E. coli carried either the PHB biosynthesis operon ( phaCAB) from Ralstonia eutropha alone, or both this operon and a gene encoding an inclusion surface protein of R. eutropha ( phaP). The results support two suggestions: (i) specific genes in the PHA gene cluster code for the proteins forming the surface boundary arrays which characterize the polymer inclusion; and (ii) transfer of such a gene would result in subcellular compartmentalization of accumulating polymer. Although the proteins appear to serve a similar function among different genera, nevertheless, the different surface proteins are encoded by a variety of non-homologous genetic sequences.