Dental Shape Research Articles

On the trail of Neolithic mice and men towards Transcaucasia: zooarchaeological clues from Nakhchivan (Azerbaijan)

Transcaucasia comprises a key region for understanding the history of both the hybrid zone between house mouse lineages and the dispersal of the Neolithic way of life outside its Near Eastern cradle. The opportunity to document the colonization history of both men and mice in Transcaucasia was made possible by the discovery of mouse remains accumulated in pits from a 6000-year-old farming village in the Nakhchivan (Autonomous Republic of Nakhchivan, Azerbaijan). The present study investigated their taxonomy and most likely dispersal path through the identification of the Mus lineage to which they might belong using a geometric morphometric approach of dental traits distances between archaeological and modern populations of the different Mus lineages of South-West Asia. We demonstrate that the mouse remains trapped in the deep storage pits of the dwelling belong to the Mus musculus domesticus from the Near East, with dental shapes similar to current populations in Northern Syria. These results strongly suggest that the domesticus lineage was dispersed into Transcaucasia from the upper Euphrates valley by Neolithic migration, some time between the 7th and 5th millennium BC, providing substantial evidence to back up the scenario featuring near-eastern stimuli in the emergence of agriculture in the South Caucasus. The domesticus mitochondrial DNA signature of the current house mouse in the same location 5000 years later, as well as their turnover towards a subspecies musculus/castaneus phenotype, suggests that early domesticus colonizers hybridized with a later musculus (and maybe castaneus) dispersal originating from south of the Caspian Sea and/or Northern Caucasia. © 2013 The Linnean Society of London, Biological Journal of the Linnean Society, 2013, 108, 917-928.

Patterns of Variation and Match Rates of the Anterior Biting Dentition: Characteristics of a Database of 3D‐Scanned Dentitions

An understanding of the variability of the anterior human dentition is essential in bitemark analysis. A collection of 1099 3D laser scans of paired maxillary and mandibular arches were studied using geometric morphometric methods. Analyses were performed without scale (shape only) and with scale (shape and size). Specimens differing by no more than experimentally obtained measurement error were counted as matches, or as indistinguishable. A total of 487 maxillary (396 size preserved), 131 mandibular (83 size preserved), and one paired dentition (two size preserved) matches were found. Principal component analysis and partial least squares revealed interpretable patterns of variation and covariation in dental shape, principally dominated by variation in dental arch width. The sensitivity of match rate to assumed degree of measurement error was also determined showing rapid increases in match rate as measurement error increased. In conclusion, the concept of dental uniqueness with regard to bitemark analysis should be approached with caution.

An Effective Dental Shape Extraction Algorithm Using Contour Information and Matching by Mahalanobis Distance

Human identification using dental radiographs is important in biometrics. Dental radiographs are mainly helpful for individual and mass disaster identification. In the 2004 tsunami, dental records were proven as the primary identifier of victims. So, this work aims to produce an automatic person identification system with shape extraction and matching techniques. For shape extraction, the available information is edge details, structural content, salient points derived from contours and surfaces, and statistical moments. Out of all these features, tooth contour information is a suitable choice here because it can provide better matching. This proposed method consists of four stages. The first step is preprocessing. The second one involves integral intensity projection for segmenting upper jaw, lower jaw, and individual tooth separately. Using connected component labeling, shape extraction was done in the third stage. The outputs obtained from the previous stage for some misaligned images are not satisfactory. So, it is improved by fast connected component labeling. The fourth stage is calculating Mahalanobis distance measure as a means of matching dental records. The matching distance observed for this method is comparatively better when it is compared with the semi-automatic contour extraction method which is our earlier work.

Dental and oral anomalies in incontinentia pigmenti: a systematic review

Incontinentia pigmenti (IP) is an X-linked genodermatosis caused by a mutation of the IKBKG gene. The objective of this study was to present a systematic review of the dental and oral types of anomalies, to determine the total number and sex distribution of the anomalies, and to analyze possible therapies. We analyzed the literature data from 1,286 IP cases from the period 1993-2010. Dental and/or oral anomalies were diagnosed for 54.38% of the investigated IP patients. Most of the anomaly types were dental, and the most frequent of these were dental shape anomalies, hypodontia, and delayed dentition. The most frequent oral anomaly types were cleft palate and high arched palate. IKBKG exon 4-10 deletion was present in 86.36% of genetically confirmed IP patients. According to the frequency, dental and/or oral anomalies represent the most frequent and important IP minor criteria. The most frequent mutation was IKBKG exon 4-10 deletion. The majority of dental anomalies and some of the oral anomalies could be corrected. Because of the presence of cleft palate and high arched palate in IP patients, these two anomalies may be considered as diagnostic IP minor criteria as well.

Conservative reconstruction of the smile by orthodontic, bleaching, and restorative procedures

The following is a clinical case report of a patient whose chief complaint was the presence of generalized spacing in the maxillary anterior segment following orthodontic treatment. After meticulous clinical analyses and discussions of the clinical procedures to be adopted, dental bleaching was performed in both arches with 10% hydrogen peroxide (Opalescence Trèswhite Supreme 10% Hydrogen Peroxide - Ultradent Products, Inc., South Jordan, USA) after the conclusion and stabilization of orthodontic treatment. Then, the orthodontic appliance was removed and the diastemas in the maxillary anterior teeth were closed with Amelogen Plus (Ultradent Products, Inc., South Jordan, USA) resin composite. It was observed that the association of orthodontic, bleaching, and restorative procedures was capable of restoring dental shape, function, and esthetics, allowing the patient to smile without hesitation.

A mongoose remain (Mammalia: Carnivora) from the Upper Irrawaddy sediments, Myanmar and its significance in evolutionary history of Asian herpestids

A tooth of a mongoose (Mammalia: Carnivora: Herpestidae) was discovered from the Upper Irrawaddy sediments in central Myanmar. The age of the fauna is not older than the mid-Pliocene. It is identified as a right first upper molar of a small species of Urva (formally included in the genus Herpestes) based on its size and shape. The present specimen is the first carnivoran from the Upper Irrawaddy sediments and is the first record of mongooses in the Pliocene and early Pleistocene of Asia. It confirms that mongooses had already dispersed into Southeast Asia by the late Pliocene, being consistent with the previous molecular phylogenetic analyses. The fossil may belong to one of the extant species, but an assignment to a specific species is difficult due to the fragmentary nature of the specimen and the small interspecific differences in dental shape among the Asian mongooses. The size of the tooth suggests that the Irrawaddy specimen is within or close to the clade of Urva auropunctata + javanica + edwardsii, and this taxonomic assignment agrees with the geographical distribution.

Dental Shape Match Rates in Selected and Orthodontically Treated Populations in New York State: A Two-dimensional Study*

Forensically identifying a suspect's dentition from a bitemark in an open population requires the supposition that every person's dental alignment is different. There have been few studies that have tested this claim. Four hundred and ten lower anterior dentitions from a selected population and 110 lower anterior dentitions from one that was orthodontically treated were measured using geometric morphometric analysis, allowing comparison of arch shape. Dental match rates of 1.46% and 42.7% of individuals were found in the respective populations, given an established measurement error. Orthodontic treatment had a strong effect on match rate suggesting that treated or naturally well-aligned dentitions may be indistinguishable. Sexual dimorphism was found to be only slightly significant. Principal shape variation in both populations was degree of arch curvature. Results of studying these populations show that dental matches can occur, and that statements of certainty concerning individualization in such populations should be approached with caution.

Geometric morphometric analysis of the second upper molar of the genus Apodemus (Muridae: Rodentia) in Northern Iran

Wood mice of the genus Apodemus are widespread in temperate areas of the Palaearctic region. Dental shape variation and morphological differences among three species of Apodemus (A. witherbyi, A. hyrcanicus, A. uralensis) were investigated using outline-based geometric morphometrics of the second upper molar (M2/) and a morphological study of 92 museum specimens belonging to five populations of Apodemus in northern Iran (East Azerbaijan, Khorasan, Tehran, Golestan, and Noor) were analyzed and identified. All species were distinguishable by the shape of the second upper molar (M2/). The Noor population was identified as A. hyrcanicus, and the Khorasan, Tehran, East Azerbaijan populations overlap with specimens of A. witherbyi and are differentiated from A. uralensis and A. hyrcanicus. Two species (A. hyrcanicus and A. witherbyi) were detected in the population from Golestan. Morphological traits could not separate A. uralensis from A. witherbyi, and according to the results of canonical variate analysis (CVA), only A. hyrcanicus is separate from the other two studied species.

Ecological and evolutionary factors in dental morphological diversification among modern human populations from southern South America

The knowledge of processes involved in morphological variation requires the integrated analysis of evolutionary and ecological factors. Here, we investigate the factors responsible for dental variation among human populations from southern South America. The aim of this work is to test the correspondence of dental size and shape variation with geographical, molecular (i.e. mtDNA) and ecological (i.e. climate, diet and food preparation) variables employing comparative phylogenetic methods, which have not previously been extensively applied at a within-species level. The results of the Procrustes analysis show a significant association of shape variables with molecular distance and geography, whereas dental size is not associated with molecular or geographical distances among groups. Phylogenetic generalized least-squares analysis, which takes into account the evolutionary autocorrelation among populations, shows a significant relationship between dental size variation and diet, while temperature and pottery do not correspond with dental size or shape. Specifically, groups with diets rich in carbohydrates, as well as the maritime hunter-gatherers, have the smallest teeth. In summary, our results support ecological factors as the dominant factor on dental size diversification in this region, while evolutionary relationships account for variation in dental shape.

Spatial patterns and evolutionary processes in southern South America: A study of dental morphometric variation

The purpose of this article is to examine the patterns of evolutionary relationships between human populations from the later Late Holocene (1,500-100 years BP) of southern South America on the basis of dental morphometric data. We tested the hypotheses that the variation observed in this region would be explained by the existence of populations with different phylogenetic origin or differential action of gene flow and genetic drift. In this study, we analyzed permanent teeth from 17 samples of male and female adult individuals from throughout southern South America. We measured mesiodistal and buccolingual diameters at the base of the crown, along the cement-enamel junction. The results of multiple regression analysis and a mantel correlogram indicate the existence of spatial structure in dental shape variation, as the D(2) Mahalanobis distance between samples increases with increasing geographical distance between them. In addition, the correlation test results show a trend toward reduction of the internal variation of samples with increasing latitude. The detected pattern of dental variation agrees with the one expected as an outcome of founder serial effects related to an expansion of range during the initial occupation of southern South America.

Odontometric Patterns in the Radiation of Extant Ground-dwelling Squirrels within Marmotini (Sciuridae: Xerini)

I document odontometric variation across ground-dwelling squirrels of the Holarctic tribe Marmotini. Dental size, which correlates well with published average body mass values across species, accounts for most odontometric variation across the clade. Dental shape variation primarily reflects relative size of P3 (upper cheek teeth) and relative width of p4–m1 + length of m3 (lower cheek teeth). Shape variables and relative tooth crown height covary significantly across species, suggesting a common functional complex or shared genetic control. When dental morphology is mapped on published DNA-based phylogenies, Sciurotamias (Chinese rock squirrels), Ammospermophilus (antelope squirrels), and basal subgenera within Spermophilus (ground squirrels [Callospermophilus and Otospermophilus]) are shown to retain inferred primitive dental morphology—small to moderate dental size, relatively small P3, relatively narrow p4–m1 + shortened m3, and relatively low toothcrown height. Other clades depart from this morphotype in size (very small in Tamias [chipmunks] and very large in Marmota [marmots]), tooth shape (especially 2 clades representing Eurasian and North American subgenus Spermophilus), or in both attributes (notably Cynomys [prairie dogs]), with frequent homoplasy. A plot of odontometric distance against published estimates of divergence time between sister clades suggests a roughly ‘‘clocklike’’ accumulation of odontometric change through time but highlights episodes of rapid odontometric evolution during the origins of Marmota, Cynomys, and Spermophilus parryii (arctic ground squirrel).

Cranial morphology and dietary habits of rodents

Rodents are important components of nearly every terrestrial ecosystem and display considerable ecological diversity. Nevertheless, a lack of data on the ecomorphology of rodents has led to them being largely overlooked in palaeoecological reconstructions. Here, geometric and linear morphometrics are used to examine how cranial and dental shapes reflect the diets of living rodent species. Although most rodents are omnivores or generalist herbivores, some species have evolved highly specialized carnivorous, insectivorous, and herbivorous diets. Results show that living rodents with similar diets display convergent morphology, despite their independent evolutionary histories. Carnivores have relatively elongate incisors, elongate and narrow incisor blades, orthodont incisor angles, reduced cheek tooth areas, and enlarged temporal fossae. Insectivores display relatively degenerate dentition, elongate rostra, narrow and thin zygomatic arches, and smaller temporal fossae. Herbivores are characterized by relatively broader incisor blades, longer molar tooth rows, larger cheek tooth areas, wider skull and rostrum, thicker and broader zygomatic arches, and larger temporal fossae. These results suggest that cranial and dental morphology can be used to accurately infer extinct rodent diets regardless of ancestry. Application to extinct beavers suggests that most had highly specialized herbivorous diets.

Influence of the power level of an ultra-sonic system on dental cavity preparation

The aim of this study was to evaluate the shape of dental cavities made with the CVDentus system using different ultrasound power levels. One standard cavity was made on the buccal aspect of 15 bovine incisors with a CVDentus cylindrical bur (82142). The sample was divided into three groups: G1-ultrasound with power II; G2-ultrasound with power III; and G3-ultrasound with power IV. A standardizing device was used to obtain standardized preparations and ultrasound was applied during one minute in each dental preparation. The cavities were sectioned in the middle, allowing observation of the cavity's profile with a magnifying glass, and width and depth measurement using the Leica Qwin program. The Kruskal-Wallis (p<0.05) and Dunn statistical analyses demonstrated differences between the dental cavity shapes when powers III and IV were used. However, the cavities that were made with power III presented dimensions similar to those of the bur used for preparation. We concluded that the power recommended by the manufacturer (III) is the most adequate for use with the CVDentus system.

Multivariate stasis in the dental morphology of the Paleocene-Eocene condylarthEctocion

Evolutionary stasis has often been explained by stabilizing selection, intrinsic constraints, or, more recently, by spatially patterned population dynamics. To distinguish which of these mechanisms explains a given case of stasis in the fossil record, stasis must first be rigorously documented in a high-resolution stratigraphic time series of fossil specimens. Furthermore, past studies of evolutionary mode in fossil mammalian lineages have often been limited to univariate traits (e.g., molar crown area). It is reasonable to assume that tooth shape, a multivariate trait, reflects important additional aspects of tooth form and function. Here we present the results of a geometric morphometric analysis of the lower dentition of the Paleocene-Eocene condylarth speciesEctocion osbornianuscollected from the Bighorn and Clarks Fork Basins of northwestern Wyoming. Tooth margin shape, cusp configuration, and shearing crest shape were digitized for the last lower premolar, p4, and for two lower molars, m1 and m3. Multivariate statistical tests of evolutionary mode were used to analyze the change in shape variance over time in addition to the magnitude and direction of shape change. Test results characterize the shape time series as consisting of counteracting changes with less change than expected under a random walk (i.e., stasis). The temporal structure of shape variance implies that the sampledE. osbornianusmost likely represent a single population, which is not concordant with the population dynamic mechanism of stasis. Stabilizing selection and/or intrinsic constraints remain as the mechanisms that could explain stasis in the lower dental shape ofE. osbornianusdespite the variable environmental conditions of the Paleocene–Eocene.

High-level similarity of dentitions in carnivorans and rodents

The study of mammalian evolution depends greatly on understanding the evolution of teeth and the relationship of tooth shape to diet. Links between gross tooth shape, function and diet have been proposed since antiquity, stretching from Aristotle to Cuvier, Owen and Osborn. So far, however, the possibilities for exhaustive, quantitative comparisons between greatly different tooth shapes have been limited. Cat teeth and mouse teeth, for example, are fundamentally distinct in shape and structure as a result of independent evolutionary change over tens of millions of years. There is difficulty in establishing homology between their tooth components or in summarizing their tooth shapes, yet both carnivorans and rodents possess a comparable spectrum of dietary specializations from animals to plants. Here we introduce homology-free techniques to measure the phenotypic complexity of the three-dimensional shape of tooth crowns. In our geographic information systems (GIS) analysis of 441 teeth from 81 species of carnivorans and rodents, we show that the surface complexity of tooth crowns directly reflects the foods they consume. Moreover, the absolute values of dental complexity for individual dietary classes correspond between carnivorans and rodents, illustrating a high-level similarity between overall tooth shapes despite a lack of low-level similarity of specific tooth components. These results suggest that scale-independent forces have determined the high-level dental shape in lineages that are widely divergent in size, ecology and life history. This link between diet and phenotype will be useful for inferring the ecology of extinct species and illustrates the potential of fast-throughput, high-level analysis of the phenotype.

A new species of Macrophiothrix (Ophiuroidea: Ophiotrichidae) common in northern Australia

A new brittlestar species Macrophiothrix caenosa is described from Darwin, Northern Territory, Australia. It is common throughout tropical Australia and is also recorded from Japan and Singapore. It is distinguished from congeners by the combination of trapeziform dorsal arm plates, short multifid disc stumps, radial shields with stumps or rugose granules, dental plate shape, arrangement of dental papillae and distribution of ventral disc armament.

Manufacturing and characterization of dental shape memory alloy

A powder mixture of 55 wt% Ni and 45 wt% Ti was prepared by mixing in a ball mill. The samples were then compacted at 300, 400, 500 and 700 MPa, and sintered at 950 °C for 9 h under controlled atmosphere (argon) to decrease the oxidation process. The same thing was made for the samples with V and Cr additives. The samples after being sintered were found to consist of two phases (martensite and austenite) at room temperature. It was found that increasing of the compacting pressure (for all samples) increases the hardness, decreases the porosity but has little effect on the transformation temperatures. The sample with 0.3 wt% Cr compacted at 700 MPa had nearly the same properties (porosity, transformation temperatures and hardness) comparing to reference thermal archwires.

Microstructural Reinforcement in the Canine Enamel of the Hyaenid Crocuta crocuta, the FelidPuma concolorand the Late Miocene Canid Borophagus secundus

In bone-eating carnivores such as the hyena Crocuta crocuta, the tooth enamel contains a secondary vertical prism decussation phyletically derived from the wavelike horizontal decussation of primitive carnivores. The structure resists fracture under vertical, oblique, and horizontal tensile stresses, owing to the following modifications of the primitive structure. Positions of wave crests and of wave troughs are synchronized in the vertically successive layers of decussating prisms. Prisms in each successive layer run in a common direction at the crests and in a common but reversed direction at the troughs. Between the crests and troughs, prisms in obliquely slanting layers often retain their primitively reversed prism directions. Near the enamel–dentine junction (EDJ), irregular horizontal decussation is retained. In the upper canine of C. crocuta, a consumer of large bones, secondary vertical decussation is largely confined to the labial and anterior sides of the crown toward the tip where modeling of the static stresses predicts the tensile stresses to be highest and aligned vertically. In Puma concolor, which does not consume large bones, secondary vertical decussation is absent, indicating stress magnitude to be a critical factor in the selection for secondary vertical decussation. The canine enamel in Borophagus secundus, an extinct canid with derived aspects of skull and dental shape like those in hyenas, has dental structures similar to those in C. crocuta but which differ in several ways. The wavelike shapes of the decussation planes are better developed in transverse sections in B. secundus than in C. crocuta, suggesting either the folds are less modified or they dip at a steeper angle. Secondary vertical decussation in B. secundus is more extensive around the circumference of the canine than in C. crocuta, related to a difference in cross-sectional shape of the tooth. Vertical prism decussation may have been more frequently attained in carnivorous mammals than in ungulates because of the more random orientation of dental stresses which creates a selective advantage for wavy decussation planes—a structural transition to vertical decussation.

Oral mucosa and dental findings in Yusho

Summary Background: Yusho is a disease caused by the ingestion of rice bran oil contaminated with polychlorinated biphenyls (PCBs), polychlorinated dibenzofurans (PCDFs) and related compounds. Oral lesions such as oral pigmentation, anomalies of the dental root shape and deficiency of tooth germs have been observed in Yusho patients. Objective: The purpose of this study was to determine the prevalence of oral lesions, especially oral pigmentation, in Yusho patients, and also to describe the relationship between oral lesions and PCBs or PCDFs. Methods: Visual and radiographic examinations were performed on Yusho patients who visited the dentist during the annual health examination in Fukuoka prefecture. The data obtained from 1968 to 2003 were analyzed. Results: Gingival pigmentation was the most common of all types of oral pigmentation seen in Yusho patients. Of all the examined Yusho patients, the proportion who had gingival pigmentation was more than 60% during the early phase after the Yusho incident, but this value had decreased to below 30% in 1993. However, it subsequently increased again to about 50% in 2003. Yusho patients with a blood PCB pattern typical of Yusho showed the highest incidence of oral pigmentation 5 years after PCB poisoning. As time passed, however, there was no specific difference in the prevalence of oral pigmentation between any type of PCB pattern, either specific to Yusho or commonly observed in the general population. Analysis of data by three-way analysis of variance (ANOVA) in 2001 and 2002 showed that there was a close relationship between the presence of upper gingival pigmentation and blood PCDF levels. Conclusions: The prevalence of oral pigmentation still remains high even after 35 years, and PCDFs may be responsible for the presence of oral pigmentation.

Morphological evolution, ecological diversification and climate change in rodents

Among rodents, the lineage from Progonomys hispanicus to Stephanomys documents a case of increasing size and dental specialization during an approximately 9 Myr time-interval. On the contrary, some contemporaneous generalist lineages like Apodemus show a limited morphological evolution. Dental shape can be related to diet and can be used to assess the ecological changes along the lineages. Consequently, size and shape of the first upper molar were measured in order to quantify the patterns of morphological evolution along both lineages and compare them to environmental trends. Climatic changes do not have a direct influence on evolution, but they open new ecological opportunities by changing vegetation and allow the evolution of a specialist like Stephanomys. On the other hand, environmental changes are not dramatic enough to destroy the habitat of a long-term generalist like Apodemus. Hence, our results exemplify a case of an influence of climate on the evolution of specialist species, although a generalist species may persist without change.