De-noising Method Research Articles

Phase denoising and unwrapping method for moiré fringes based on multiresolution analysis

Phase unwrapping for moiré fringes plays a crucial role in moiré tomography, and the precision of its outcomes deeply influences the detection results concerning high-temperature complex flow fields. In this paper, a phase denoising and unwrapping technique grounded in multiresolution analysis (MRA) is presented, and it is effectively applied to extract phase information from moiré fringes for propane-air flame and argon arc plasma flow fields. Firstly, the wrapped phase undergoes a wavelet packet decomposition for overall denoising. Subsequently, MRA is conducted to refine the denoising process and unwrap phase, involving layered wavelet packet decomposition and iterative unwrapping on different levels of approximate components. Following the hierarchical structure of MRA, the results from different levels are systematically combined and summarized. In order to ascertain the feasibility and applicability of this approach, a comparison is conducted between the results obtained from our proposed method and those obtained from three representative traditional methods. And then, the outcomes obtained from various unwrapping methods in scenarios involving noise and discontinuity, as well as the results between diverse wavelet basis functions, different decomposition layers and distinct iterations, are meticulously analyzed and compared. The findings indicate that our proposed method outperforms traditional phase unwrapping techniques in terms of continuity and smoothness, particularly when exposed to severe noise. Unlike the three classic methods, our proposed method maintains consistent results even in the presence of noise, thereby highlighting its advantages in terms of resilience against noise. In a word, this research serves as a crucial reference for the accurate detection of complex high-temperature flow fields by moiré tomography.

A de-noising method of magnetotelluric signals based on the generalized S-transform

The generalized S-transform has excellent time-frequency resolution capability. It can effectively demonstrate the non-stationary characteristics of signals and the dynamic changes in energy. This provides the conditions for denoising in the time-frequency domain. The magnetotelluric (MT) survey method is often affected by various artificial noises, and these noises are very prominent in certain frequency bands. To address this problem, a method based on the generalized S transform is proposed to de-noise MT data. The generalized S transform is used to improve the time-frequency localization of the different signal components, meanwhile the electromagnetic noise can be conveniently suppressed in the time-frequency domain. Simulated signals and measured MT signals contaminated by common sinusoidal and triangular wave interference are processed. The results were compared with those of the Wavelet threshold method. Results show that the presented method is more conducive to the identification and suppression of electromagnetic noise and shows better de-noising results than the Wavelet threshold method. After de-noising, the useful information of the MT signal affected by strong interference is highlighted, which provides favorable conditions for power spectrum and impedance estimation in the future. Further, the response parameter curve calculated from the de-noised data becomes stable. The proposed method provides a new alternative for de-noising of MT signals, especially those with low signal-to-noise ratios.

Deep-silicon photon-counting x-ray projection denoising through reinforcement learning.

In recent years, deep reinforcement learning (RL) has been applied to various medical tasks and produced encouraging results. In this paper, we demonstrate the feasibility of deep RL for denoising simulated deep-silicon photon-counting CT (PCCT) data in both full and interior scan modes. PCCT offers higher spatial and spectral resolution than conventional CT, requiring advanced denoising methods to suppress noise increase. In this work, we apply a dueling double deep Q network (DDDQN) to denoise PCCT data for maximum contrast-to-noise ratio (CNR) and a multi-agent approach to handle data non-stationarity. Using our method, we obtained significant image quality improvement for single-channel scans and consistent improvement for all three channels of multichannel scans. For the single-channel interior scans, the PSNR (dB) and SSIM increased from 33.4078 and 0.9165 to 37.4167 and 0.9790 respectively. For the multichannel interior scans, the channel-wise PSNR (dB) increased from 31.2348, 30.7114, and 30.4667 to 31.6182, 30.9783, and 30.8427 respectively. Similarly, the SSIM improved from 0.9415, 0.9445, and 0.9336 to 0.9504, 0.9493, and 0.0326 respectively. Our results show that the RL approach improves image quality effectively, efficiently, and consistently across multiple spectral channels and has great potential in clinical applications.

Self-supervised dual-domain balanced dropblock-network for low-dose CT denoising

Objective. Self-supervised learning methods have been successfully applied for low-dose computed tomography (LDCT) denoising, with the advantage of not requiring labeled data. Conventional self-supervised methods operate only in the image domain, ignoring valuable priors in the sinogram domain. Recently proposed dual-domain methods address this limitation but encounter issues with blurring artifacts in the reconstructed image due to the inhomogeneous distribution of noise levels in low-dose sinograms. Approach. To tackle this challenge, this paper proposes SDBDNet, an end-to-end dual-domain self-supervised method for LDCT denoising. With the network designed based on the properties of inhomogeneous noise in low-dose sinograms and the principle of moderate sinogram-domain denoising, SDBDNet achieves effective denoising in dual domains without introducing blurring artifacts. Specifically, we split the sinogram into two subsets based on the positions of detector cells to generate paired training data with high similarity and independent noise. These sub-sinograms are then restored to their original size using 1D interpolation and learning-based correction. To achieve adaptive and moderate smoothing in the sinogram domain, we integrate Dropblock, a type of convolution layer with regularization, into SDBDNet, and set a weighted average between the denoised sinograms and their noisy counterparts, leading to a well-balanced dual-domain approach. Main results. Numerical experiments show that our method outperforms popular non-learning and self-supervised learning methods, demonstrating its effectiveness and superior performance. Significance. While introducing a novel high-performance dual-domain self-supervised LDCT denoising method, this paper also emphasizes and verifies the importance of appropriate sinogram-domain denoising in dual-domain methods, which might inspire future work.

Learning Image Demoiréing from Unpaired Real Data

This paper focuses on addressing the issue of image demoiréing. Unlike the large volume of existing studies that rely on learning from paired real data, we attempt to learn a demoiréing model from unpaired real data, i.e., moiré images associated with irrelevant clean images. The proposed method, referred to as Unpaired Demoiréing(UnDeM), synthesizes pseudo moiré images from unpaired datasets, generating pairs with clean images for training demoiréing models. To achieve this, we divide real moiré images into patches and group them in compliance with their moiré complexity. We introduce a novel moiré generation framework to synthesize moiré images with diverse moiré features, resembling real moiré patches, and details akin to real moiré-free images. Additionally, we introduce an adaptive denoise method to eliminate the low-quality pseudo moiré images that adversely impact the learning of demoiréing models. We conduct extensive experiments on the commonly-used FHDMi and UHDM datasets. Results manifest that our UnDeM performs better than existing methods when using existing demoiréing models such as MBCNN and ESDNet-L. Code: https://github.com/zysxmu/UnDeM.

Hyperspectral image dynamic range reconstruction using deep neural network-based denoising methods

Hyperspectral (HS) measurement is among the most useful tools in agriculture for early disease detection. However, the cost of HS cameras that can perform the desired detection tasks is prohibitive-typically fifty thousand to hundreds of thousands of dollars. In a previous study at the Agricultural Research Organization’s Volcani Institute (Israel), a low-cost, high-performing HS system was developed which included a point spectrometer and optical components. Its main disadvantage was long shooting time for each image. Shooting time strongly depends on the predetermined integration time of the point spectrometer. While essential for performing monitoring tasks in a reasonable time, shortening integration time from a typical value in the range of 200 ms to the 10 ms range results in deterioration of the dynamic range of the captured scene. In this work, we suggest correcting this by learning the transformation from data measured with short integration time to that measured with long integration time. Reduction of the dynamic range and consequent low SNR were successfully overcome using three developed deep neural networks models based on a denoising auto-encoder, DnCNN and LambdaNetworks architectures as a backbone. The best model was based on DnCNN using a combined loss function of ℓ2\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$\\ell _{2}$$\\end{document} and Kullback–Leibler divergence on images with 20 consecutive channels. The full spectrum of the model achieved a mean PSNR of 30.61 and mean SSIM of 0.9, showing total improvement relatively to the 10 ms measurements’ mean PSNR and mean SSIM values by 60.43% and 94.51%, respectively.

A new fault component selection strategy based on statistical detection for slewing bearing weak signal de-noising

Slewing bearing is a critical transmission component in large-size construction machinery due to its low-speed and heavy-load conditions. Fault prognostics and health management of slewing bearing are crucial for ensuring their high availability and profitable operation. However, the presence of background noise in construction machinery signals restricts the applicability of existing signal processing approaches in prognostics and health management. To address this challenge, a novel signal de-noising method is proposed based on adaptive decomposition, along with a new strategy for recognizing fault components using statistic detection through kernel principal component analysis (KPCA). First, robust local mean decomposition is utilized to adaptively decompose the fault and normal vibration signal over the entire service life. Then, product functions (PFs) decomposed by fault and normal vibration signal are used for KPCA anomaly detection. Finally, the fault PFs are reconstructed to obtain the de-noised signal. The effectiveness of the proposed method is validated through the use of both simulated and experimental vibration signals obtained from a slewing-bearing life-cycle test. The results illustrate that the proposed method has superior de-noising capability and decomposition efficiency, making it an effective signal preprocessing technique for prognostics and health management.

Denoising OCT videos based on temporal redundancy

The identification of eye diseases and their progression often relies on a clear visualization of the anatomy and on different metrics extracted from Optical Coherence Tomography (OCT) B-scans. However, speckle noise hinders the quality of rapid OCT imaging, hampering the extraction and reliability of biomarkers that require time series. By synchronizing the acquisition of OCT images with the timing of the cardiac pulse, we transform a low-quality OCT video into a clear version by phase-wrapping each frame to the heart pulsation and averaging frames that correspond to the same instant in the cardiac cycle. Here, we compare the performance of our one-cycle denoising strategy with a deep-learning architecture, Noise2Noise, as well as classical denoising methods such as BM3D and Non-Local Means (NLM). We systematically analyze different image quality descriptors as well as region-specific metrics to assess the denoising performance based on the anatomy of the eye. The one-cycle method achieves the highest denoising performance, increases image quality and preserves the high-resolution structures within the eye tissues. The proposed workflow can be readily implemented in a clinical setting.

LPF/OGS: A Low-Pass Filtering and Overlapping Group Shrinkage Denoising Method for Diesel Engine Fault Diagnosis

LPF/OGS: A Low-Pass Filtering and Overlapping Group Shrinkage Denoising Method for Diesel Engine Fault Diagnosis

Permutation fuzzy entropy based ICEEMDAN de-noising for inertial sensors

As one of the critical factors affecting the accuracy of inertial navigation system (INS) positioning, random noise will lead to the accumulation of INS positioning errors, even the failure of the system. Previous studies mainly focus on achieving noise reduction by adopting either the wavelet decomposition method or some relevant methods of the empirical mode decomposition (EMD). However, the former is limited by Heisenberg’s uncertainty principle when processing non-stationary signals, and the latter exhibits numerous mode-mixing phenomena during the decomposition process. In this paper, a permutation fuzzy entropy (PFE) based improved complete ensemble EMD with adaptive noise (ICEEMDAN) de-noising method is proposed to utilize the ICEEMDAN method for signal decomposition, and the PFE as an index to distinguish the effective intrinsic mode functions (IMFs) and the noisy IMFs during the decomposition process. In addition, simulated signals with different noise levels and field data with different durations are utilized to design a group of experiments to test the de-noising performance of the PFE-based ICEEMDAN de-noising method. The experimental results demonstrate that the advantages of our proposed method consists of three main parts: (1) The ICEEMDAN method more effectively alleviates the mode-mixing problem compared to the complete ensemble EMD with adaptive noise (CEEMDAN), thereby enhancing the accuracy of inertial measurement unit (IMU) signal reconstruction; (2) the PFE is more preferable than the permutation entropy for classify IMFs decomposed by the ICEEMDAN method; (3) our proposed method can effectively reduce IMU signal noise and improve the positioning accuracy of inertial sensor.

Adapting low-dose CT denoisers for texture preservation using zero-shot local noise-level matching.

On enhancing the image quality of low-dose computed tomography (LDCT), various denoising methods have achieved meaningful improvements. However, they commonly produce over-smoothed results; the denoised images tend to be more blurred than the normal-dose targets (NDCTs). Furthermore, many recent denoising methods employ deep learning(DL)-based models, which require a vast amount of CT images (or image pairs). Our goal is to address the problem of over-smoothed results and design an algorithm that works regardless of the need for a large amount of training dataset to achieve plausible denoising results. Over-smoothed images negatively affect the diagnosis and treatment since radiologists had developed clinical experiences with NDCT. Besides, a large-scale training dataset is often not available in clinical situations. To overcome these limitations, we propose locally-adaptive noise-level matching (LANCH), emphasizing the output should retain the same noise-level and characteristics to that of the NDCT without additionaltraining. We represent the NDCT image as the pixel-wisely weighted sum of an over-smoothed output from off-the-shelf denoiser (OSD) and the difference between the LDCT image and the OSD output. Herein, LANCH determines a 2D ratio map (i.e., pixel-wise weight matrix) by locally matching the noise-level of output and NDCT, where the LDCT-to-NDCT device flux (mAs) ratio reveals the NDCT noise-level. Thereby, LANCH can preserve important details in LDCT, and enhance the sharpness of the noise-free regions. Note that LANCH can enhance any LDCT denoisers without additional training data (i.e., zero-shot). The proposed method is applicable to any OSD denoisers, reporting significant texture plausibility development over the baseline denoisers in quantitative and qualitative manners. It is surprising that the denoising accuracy achieved by our method with zero-shot denoiser was comparable or superior to that of the best training-based denoisers; our result showed 1% and 33% gains in terms of SSIM and DISTS, respectively. Reader study with experienced radiologists shows significant image quality improvements, a gain of +1.18 on a five-point mean opinion scorescale. In this paper, we propose a technique to enhance any low-dose CT denoiser by leveraging the fundamental physical relationship between the x-ray flux and noise variance. Our method is capable of operating in a zero-shot condition, which means that only a single low-dose CT image is required for the enhancement process. We demonstrate that our approach is comparable or even superior to supervised DL-based denoisers that are trained using numerous CT images. Extensive experiments illustrate that our method consistently improves the performance of all tested LDCT denoisers.

Empirical Wavelet Transform Based ECG Signal Filtering Method

The electrocardiogram (ECG) is a diagnostic tool that provides insights into the heart’s electrical activity and overall health. However, internal and external noises complicate accurate heart issue diagnosis. Noise in the ECG signal distorts and introduces artifacts, making it difficult to detect subtle abnormalities. To ensure an accurate evaluation, noise-free ECG signals are crucial. This study introduces the empirical wavelet transform (EWT), a contemporary denoising method. EWT decomposes the signal into frequency components, allowing detailed analysis by constructing a customized wavelet basis. Researchers and practitioners can enhance signal analysis by separating the desired components from unwanted noise. The EWT approach effectively eliminates noise while maintaining signal information. The study applies DWT-ADTF, FST, Kalman, Liouville–Weyl fractional compound integral filter LW, Weiner, and EWT denoising methods to two ECG databases from MIT-BIH, which encompass a wide range of cardiac signals and noise levels. The comparative analysis highlights EWT’s strengths through improved signal quality and objective performance metrics. This adaptive transform proves promising for denoising ECG signals and facilitating accurate analysis in clinical and research settings.

On autoregressive and neural methods for massive-MIMO channel de-noising

In modern wireless communication systems, the Multiple-Input Multiple-Output (MIMO) technology allows to greatly increase power efficiency, the serving area, and the overall cell throughput through the use of the antenna array beamforming. Nevertheless, the MIMO systems require accurate channel state knowledge to apply correct precoding. In 5G Time Division Duplex (TDD) systems, the Channel State Information (CSI) is obtained via Sounding Reference Signals (SRS) transmitted by the User Equipment (UE). UEs have limited power capabilities and thus cannot achieve high Uplink (UL) Signal-to-Noise Ratio (SNR) on gNodeB (gNB) in large bandwidth. There are multiple techniques that can be applied to improve the accuracy of Channel Estimation (CE) in noisy conditions. In this paper, we describe a classical method, namely the Vector Autoregression (VAR) with adaptive model order estimation, as well as a modern Deep Neural Network (DNN) approach for the massive-MIMO channel estimation de-noising problem. The developed methods and signal pre and postprocessing steps are described, followed by their performance evaluation in a set of realistic simulations. The designed algorithms provide results outperforming the baseline spatio-temporal windowing approaches by approximately equal to 2dB effective Downlink (DL) Signal-to-Interference-plus-Noise Ratio (SINR) metric in single and multi-user MIMO scenarios. Extensive simulation results demonstrate the robustness of the developed methods to the dynamic channel conditions.

Data model-based toolpath generation techniques for CNC milling machines

Introduction: With the development of computer technology and data modeling, the use of point cloud models to generate tool paths is particularly important for improving productivity and accuracy.Methods: This study proposes a new method that first preprocesses the point cloud data using four-point denoising and octree methods to improve processing efficiency. Subsequently, roughing tool paths were analyzed using the layer slicing method and finishing paths using the residual height method.Results and Discussion: The experimental results show that the layer slicing method has a minimum error close to 10% on the roughing path generation and the computation time is reduced to 35 s, while the residual height method has an error rate of 10.17% on the finishing path and the computation time is only 11.82 s, which reflects a high trajectory smoothness and accuracy. The above results show that the study not only optimizes the tool path generation process and improves the machining efficiency and accuracy, but also demonstrates the potential application of point cloud models in the machining of complex parts.Conclusion: The novel tool roughing and finishing methods provide more reliable path planning for actual machining operations, and future research will be devoted to further improving the performance of the data processing algorithms and exploring more efficient path planning strategies to facilitate automated production.

Noise aware content-noise complementary GAN with local and global discrimination for low-dose CT denoising

In response to rising concerns over radiation exposure in computed tomography (CT) imaging, effective denoising methods for low-dose CT (LDCT) images are crucial. In recent years, the use of deep learning techniques especially generative adversarial networks (GANs) significantly enhanced the efficiency of LDCT denoising methods, surpassing traditional methods. However, GAN-based denoising methods often face challenges in preserving structural consistency and fine details. This study introduces a novel GAN framework with three accretions to enhance the effectiveness of LDCT denoising. Firstly, our generator is designed to leverage a complementary learning scheme between image noise and image content via two distinct paths. One path focuses on exploring the anatomical information of the image, while the second path is dedicated to learning the noise pattern. This complementary learning scheme provides stable noise cancellation while preserving the maximum structural information of the image. Subsequently, we propose a novel noise-conscious mean absolute error loss to address the challenge posed by the non-stationary characteristic of CT noise. In contrast to conventional MAE loss, this loss attentively prioritizes the different parts of the image based on the local distribution of noise in that region. We also incorporate a gradient-domain loss into the loss function, which inspires the generator to preserve precise image details through explicit guidance. Finally, this study adopted a U-Net-based design for the discriminator to better regularize the model by discriminating between the clean image and the denoised image at both global and local levels. The merit of this discriminator is that it can better adapt to the non-stationary environment of GAN training and guide the generator to produce denoised images that are locally and globally consistent. Our thorough experiments using abdominal CT and lung CT datasets demonstrate the superior performance of our approach compared to state-of-the-art methods.

A deep learning framework for suppressing prestack seismic random noise without noise-free labels

Random noise attenuation is significant in seismic data processing. Supervised deep learning-based denoising methods have been widely developed and applied in recent years. In practice, it is often time-consuming and laborious to obtain noise-free data for supervised learning. Therefore, we propose a novel deep learning framework to denoise prestack seismic data without clean labels, which trains a high-resolution residual neural network (SRResnet) with noisy data for input and the same valid data with different noise for output. Since valid signals in noisy sample pairs are spatially correlated and random noise is spatially independent and unpredictable, the model can learn the features of valid data while suppressing random noise. Noisy data targets are generated by a simple conventional method without fine-tuning parameters. The initial estimates allow signal or noise leakage as the network does not require clean labels. The Monte Carlo strategy is applied to select training patches for increasing valid patches and expanding training datasets. Transfer learning is used to improve the generalization of real data processing. The synthetic and real data tests perform better than the commonly used state-of-the-art denoising methods.

Machine learning-assisted acoustic emission monitoring for track formability prediction of laser powder bed fusion

Laser powder bed fusion (L-PBF) additive manufacturing offers many advantages in directly fabricating geometrically complex parts. To achieve the optimal L-PBF-built part quality, the laser process parameters should be tailored before building or real-time adjusted during building if necessary. Monitoring the formation quality of L-PBF-built metal tracks during the building process is a technical prerequisite. The work studies the acoustic emission (AE) monitoring and machine learning (ML) to predict the formation quality of as-built tracks. The AE signals from the L-PBF processes under different laser parameters are collected. A method of deep neural network-based denoising is employed to identify and eliminate the AE noise-hits. Signal segments of interest signals in the track melting-solidification stage are detected and extracted. The features for constructing the ML models are extracted by combining wavelet packet transform and self-organization map network. The random forest is used for formation quality prediction of the as-built tracks. The correlation between AE signals and as-built track quality is analyzed based on the similarity matrix of self-organization map. The results indicate that the as-built track quality can be monitored by AE technology and ML model. It contributes to that the L-PBF process stability and the as-built track quality reliability can be ensured by adjusting the process parameters in time during the L-PBF process.

Hybrid variable exponent model for image denoising: A nonstandard high-order PDE approach with local and nonlocal coupling

In this paper, we propose a novel hybrid model combining local and nonlocal methods for effective image denoising. The model utilizes variable exponents p(x) to achieve adaptive diffusion behavior and preserve image features. Nevertheless, the coupling structure of our proposed process, along with the spatial dependence of p(x), poses challenges in theoretical analysis. To address this, we investigate the existence and uniqueness of the solution using the Faedo-Galerkin approximation, a priori estimates, and compactness considerations. Through these theoretical investigations, we demonstrate the existence of a weak solution for the coupled parabolic system. Overall, our model outperforms existing methods in noise reduction and image quality preservation.

CEEMDAN-LWT De-Noising Method for Pipe-Jacking Inertial Guidance System Based on Fiber Optic Gyroscope.

An inertial guidance system based on a fiber optic gyroscope (FOG) is an effective way to guide long-distance curved pipe jacking. However, environmental disturbances such as vibration, electromagnetism, and temperature will cause the FOG signal to generate significant random noise. The random noise will overwhelm the effective signal. Therefore, it is necessary to eliminate the random noise. This study proposes a hybrid de-noising method, namely complete ensemble empirical mode decomposition with adaptive noise (CEEMDAN)-lifting wavelet transform (LWT). Firstly, the FOG signal is extracted using a sliding window and decomposed by CEEMDAN to obtain the intrinsic modal function (IMF) with N different scales and one residual. Subsequently, the effective IMF components are selected according to the correlation coefficient between the IMF components and the FOG signal. Due to the low resolution of the CEEMDAN method for high-frequency components, the selected high-frequency IMF components are decomposed with lifting wavelet transform to increase the resolution of the signal. The detailed signals of the LWT decomposition are de-noised using the soft threshold de-noising method, and then the signal is reconstructed. Finally, pipe-jacking dynamic and environmental interference experiments were conducted to verify the effectiveness of the CEEMDAN-LWT de-noising method. The de-noising effect of the proposed method was evaluated by SNR, RMSE, and Deviation and compared with the CEEMDAN and LWT de-noising methods. The results show that the CEEMDAN-LWT de-noising method has the best de-noising effect with good adaptivity and high accuracy. The navigation results of the pipe-jacking attitude before and after de-noising were compared and analyzed in the environmental interference experiment. The results show that the absolute error of the pipe-jacking pitch, roll, and heading angles is reduced by 39.86%, 59.45%, and 14.29% after de-noising. The maximum relative error of the pitch angle is improved from -0.74% to -0.44%, the roll angle is improved from 2.07% to 0.79%, and the heading angle is improved from -0.07% to -0.06%. Therefore, the CEEMDAN-LWT method can effectively suppress the random errors of the FOG signal caused by the environment and improve the measurement accuracy of the pipe-jacking attitude.

Comparing data-driven physiological denoising approaches for resting-state fMRI: implications for the study of aging.

Physiological nuisance contributions by cardiac and respiratory signals have a significant impact on resting-state fMRI data quality. As these physiological signals are often not recorded, data-driven denoising methods are commonly used to estimate and remove physiological noise from fMRI data. To investigate the efficacy of these denoising methods, one of the first steps is to accurately capture the cardiac and respiratory signals, which requires acquiring fMRI data with high temporal resolution. In this study, we used such high-temporal resolution fMRI data to evaluate the effectiveness of several data-driven denoising methods, including global-signal regression (GSR), white matter and cerebrospinal fluid regression (WM-CSF), anatomical (aCompCor) and temporal CompCor (tCompCor), ICA-AROMA. Our analysis focused on the consequence of changes in low-frequency, cardiac and respiratory signal power, as well as age-related differences in terms of functional connectivity (fcMRI). Our results confirm that the ICA-AROMA and GSR removed the most physiological noise but also more low-frequency signals. These methods are also associated with substantially lower age-related fcMRI differences. On the other hand, aCompCor and tCompCor appear to be better at removing high-frequency physiological signals but not low-frequency signal power. These methods are also associated with relatively higher age-related fcMRI differences, whether driven by neuronal signal or residual artifact. These results were reproduced in data downsampled to represent conventional fMRI sampling frequency. Lastly, methods differ in performance depending on the age group. While this study cautions direct comparisons of fcMRI results based on different denoising methods in the study of aging, it also enhances the understanding of different denoising methods in broader fcMRI applications.