Drug Delivery Research Articles

Development of a Biodegradable PLGA Carrier to Provide Wnt Agonists and Antibiotics to Meet the Requirements for Patients with Bone Infections

Antibiotic beads can be used to treat surgical infections. In this study, polylactide–polyglycolide (PLGA) was mixed with vancomycin, the osteogenic enhancer lithium chloride (LiCl), and hot compression to form PLGA-vancomycin-LiCl delivery beads to treat bone infection. An elution method was used to characterize in vitro release characteristics of vancomycin and Li over a 42-day period. The release profiles lasted for more than 42 days for vancomycin and 28 days for Li. The concentration of vancomycin in each sample was well above the breakpoint sensitivity. Lithium cotreatment enhanced the bactericidal effect of vancomycin. Released Li and vancomycin increased the mRNA or protein expressions of osteogenic markers of mesenchymal stem cells (MSCs). In vivo, the PLGA delivery systems were implanted into the distal femoral cavities of rabbits, and the cavity fluid content was aspirated and analyzed at each time point. The released Li and vancomycin lasted more than 6 weeks, and the vancomycin concentrations were much greater than the breakpoint sensitivity. Four rabbits in each group were sacrificed at 8 weeks for histological observation. More mature bone tissue was observed in the Li treatment group. This study provides a PLGA drug delivery system to meet the requirements of patients with bone infections.

Innovative Nanoscale Drug Delivery Strategies for Breast Carcinoma: A Comprehensive Exploration.

Breast cancer (BC) is one of the major causes of poor health in women and the most devastating disease after lung cancer. The term "cancer" refers to a collection of problems resulting from abnormal cell proliferation, particularly cells that can spread to other parts of the body. Surgery, followed by chemotherapy or radiotherapy, is now accepted for BC-related cancers. However, chemotherapy and radiotherapy are rarely effective in the treatment of BC due to the adverse effects of these treatments on healthy tissues and organs. Consequently, the use of NPs in targeted Drug Delivery Systems (DDSs) has emerged as a promising strategy for BC treatment. This review provides a summary of recent clinical investigations of nanoparticle-mediated DDS that offer a novel therapeutic strategy commonly used for the treatment of breast cancer.

Mitigating infections in implantable urological continence devices: risks, challenges, solutions, and future innovations. A comprehensive literature review.

Stress urinary incontinence is a growing issue in ageing men, often following treatment for prostate cancer or bladder outflow obstruction. While implantable urological devices offer relief, infections are a significant concern. These infections can lead to device removal, negating the benefits and impacting patient outcomes. This review explores the risks and factors contributing to these infections and existing strategies to minimize them. These strategies encompass a multifaceted approach that considers patient-specific issues, environmental issues, device design and surgical techniques. However, despite these interventions, there is still a pressing need for further advancements in device infection prevention. Faster diagnostics, such as Raman spectroscopy, could enable early detection of infections. Additionally, biocompatible adjuncts like ultrasound-responsive microbubbles hold promise for enhanced drug delivery and biofilm disruption, particularly important as antibiotic resistance rises worldwide. By combining advancements in diagnostics, device design, and patient-specific surgical techniques, we can create a future where implantable urological devices offer men a significant improvement in quality of life with minimal infection risk.

A comparative study of sericin and gluten for magnetic nanoparticle-mediated drug delivery to breast cancer cell lines

With breast cancer emerging as a pressing global health challenge, characterized by escalating incidence rates and geographical disparities, there is a critical need for innovative therapeutic strategies. This comprehensive research navigates the landscape of nanomedicine, specifically focusing on the potential of magnetic nanoparticles (MNPs), with magnetite (Fe3O4) taking center stage. MNPs, encapsulated in biocompatible polymers like silica known as magnetic silica nanoparticles (MSN), are augmented with phosphotungstate (PTA) for enhanced chemodynamic therapy (CDT). PTA is recognized for its dual role as a natural chelator and electron shuttle, expediting electron transfer from ferric (Fe3+) to ferrous (Fe2+) ions within nanoparticles. Additionally, protein-based charge-reversal nanocarriers like silk sericin and gluten are introduced to encapsulate (MSN-PTA) nanoparticles, offering a dynamic facet to drug delivery systems for potential revolutionization of breast cancer therapy. This study successfully formulates and characterizes protein-coated nanocapsules, specifically MSN-PTA-SER, and MSN-PTA-GLU, with optimal physicochemical attributes for drug delivery applications. The careful optimization of sericin and gluten concentrations results in finely tuned nanoparticles, showcasing uniform size, enhanced negative zeta potential, and remarkable stability. Various analyses, from Dynamic Light Scattering (DLS) and scanning electron microscopy (SEM) to transmission electron microscopy (TEM), Fourier Transform Infrared Spectroscopy (FTIR), X-Ray diffraction analysis (XRD), and Thermogravimetric analysis (TGA), provide insights into structural integrity and surface modifications. Vibrating Sample Magnetometer (VSM) analysis underscores superparamagnetic behavior, positioning these nanocapsules as promising candidates for targeted drug delivery. In vitro evaluations demonstrate dose-dependent inhibition of cell viability in MCF-7 and Zr-75–1 breast cancer cells, emphasizing the therapeutic potential of MSN-PTA-SER and MSN-PTA-GLU. The interplay of surface charge and pH-dependent cellular uptake highlights the robust stability and versatility of these nanocarriers in tumor microenvironment, paving the way for advancements in targeted drug delivery and personalized nanomedicine. This comparative analysis explores the suitability of silk sericin and gluten, unraveling a promising avenue for the development of advanced, targeted, and efficient breast cancer treatments.

Pectin and Alginate Functional Biopolymers: Factors Influencing Structural Composition, Functional Characteristics and Biofilm Development

Various natural polymers have been explored for their specific and desirable functional properties. Biopolymers have been found to hold the potential to satisfy many current environmental and health needs from a natural food packaging perspective. With a drive towards a more sustainable and plastic-free future, polymers like pectin and alginate have been considered key to reducing traditional plastic packaging usage in the food industry. These well-established, commercially available biopolymers display unique functional properties that can be manipulated in the development of biofilms that possess specific physical–mechanical properties. Pectin and alginate have also proven successful in the biomedical applications of encapsulation, drug delivery, wound healing and tissue engineering, greatly due to their ability to form biofilms and coatings. The structural and consequent functional properties of pectin and alginate have been investigated, although rarely concurrently with one another, focusing on biofilm development. Research has specifically identified and highlighted the importance of pectin and alginate in developing biofilms due to their versatile and charged structural nature. This review article discusses and highlights factors responsible for the specific properties displayed by pectin and alginate biofilms from a chemical and film development perspective.

Monocyte/Macrophage-Mediated Transport of Dual-Drug ZIF Nanoplatforms Synergized with Programmed Cell Death Protein-1 Inhibitor Against Microsatellite-Stable Colorectal Cancer.

Microsatellite-stable colorectal cancer (MSS-CRC) exhibits resistance to programmed cell death protein-1 (PD-1) therapy. Improving the infiltration and tumor recognition of cytotoxic T-lymphocytes (CTLs) is a promising strategy, but it encounters huge challenges from drug delivery and mechanisms aspects. Here, a zeolitic imidazolate framework (ZIF) coated with apoptotic body membranes derived from MSS-CRC cells is engineered for the co-delivery of ginsenoside Rg1 (Rg1) and atractylenolide-I (Att) to MSS-CRC, named as Ab@Rg1/Att-ZIF. This system is selectively engulfed by Ly-6C+ monocytes during blood circulation and utilizes a "hitchhiking" mechanism to migrate toward the core of MSS-CRC. Ab@Rg1/Att-ZIF undergoes rapid disassembly in the tumor, released Rg1 promotes the processing and transportation of tumor antigens in dendritic cells (DCs), enhancing their maturation. Meanwhile, Att enhances the activity of the 26S proteasome complex in tumor cells, leading to increased expression of major histocompatibility complex class-I (MHC-I). These coordinated actions enhance the infiltration and recognition of CTLs in the center of MSS-CRC, significantly improving the tumor inhibition of PD-1 treatment from ≈5% to ≈69%. This innovative design, involving inflammation-guided precise drug co-delivery and a rational combination, achieves synergistic engineering of the tumor microenvironment, providing a novel strategy for successful PD-1 treatment of MSS-CRC.

ATP-binding cassette transporter inhibitor potency and substrate drug affinity are critical determinants of successful drug delivery enhancement to the brain

BackgroundPharmacotherapy for brain diseases is severely compromised by the blood-brain barrier (BBB). ABCB1 and ABCG2 are drug transporters that restrict drug entry into the brain and their inhibition can be used as a strategy to boost drug delivery and pharmacotherapy for brain diseases.MethodsWe employed elacridar and tariquidar in mice to explore the conditions for effective inhibition at the BBB. Abcg2;Abcb1a/b knockout (KO), Abcb1a/b KO, Abcg2 KO and wild-type (WT) mice received a 3 h i.p. infusion of a cocktail of 8 typical substrate drugs in combination with elacridar or tariquidar at a range of doses. Abcg2;Abcb1a/b KO mice were used as the reference for complete inhibition, while single KO mice were used to assess the potency to inhibit the remaining transporter. Brain and plasma drug levels were measured by LC-MS/MS.ResultsComplete inhibition of ABCB1 at the BBB is achieved when the elacridar plasma level reaches 1200 nM, whereas tariquidar requires at least 4000 nM. Inhibition of ABCG2 is more difficult. Elacridar inhibits ABCG2-mediated efflux of weak but not strong ABCG2 substrates. Strikingly, tariquidar does not enhance the brain uptake of any ABCG2-subtrate drug. Similarly, elacridar, but not tariquidar, was able to inhibit its own brain efflux in ABCG2-proficient mice. The plasma protein binding of elacridar and tariquidar was very high but similar in mouse and human plasma, facilitating the translation of mouse data to humans.ConclusionsThis work shows that elacridar is an effective pharmacokinetic-enhancer for the brain delivery of ABCB1 and weaker ABCG2 substrate drugs when a plasma concentration of 1200 nM is exceeded.

3D printed microneedles: revamping transdermal drug delivery systems.

One of the advancements of the transdermal drug delivery system (TDDS) is the development of microneedles (MNs). These micron-sized needles are used for delivering various types of drugs to address the disadvantage of other transdermal techniques as well as oral drug delivery systems. MNs have high patient acceptance due to self-administration with minimally invasive and pain compared to the parenteral drug delivery. Over the years, various methods have been adopted to evolve the MNs and make them more cost-effective, accurate, and suitable for multiple applications. One such method is the 3D printing of MNs. The development of MN platforms using 3D printing has been made possible by improved features like precision, printing resolution, and the feasibility of using low-cost raw materials. In this review, we have tried to explain various types of MNs, fabrication methods, materials used in the formulation of MNs, and the recent applications that utilize 3D-printed MNs.

Nanogel: A versatile drug delivery system for the treatment of various diseases and their future perspective.

Nanogel (NG) drug delivery systems have emerged as promising tools for targeted and controlled drug release, revolutionizing treatment approaches across various diseases.Their unique physicochemical properties, such as nano size, high surface area,biocompatibility, stability, and tunable drug release, make themideal carriers for a wide range of therapeutic agents. Nanogels (NGs), characterized by their 3D network of crosslinked polymers, offer unique edges like high drug loading capacity, controlled release, and targeted delivery. Additionally, the diverse applications of NGs in medical therapeutics highlight their versatility and potential impact on improving patient outcomes. Their application spans cancer treatment, infectious diseases, and chronic conditions, allowing for precise drug delivery to specific tissues or cells, minimizing side effects, and enhancing therapeutic efficacy. Despite their potential, challenges such as scalability, manufacturing reproducibility, and regulatory hurdles must be addressed. Achieving clinical translation requires overcoming these obstacles to ensure therapeutic payloads' safe and efficient delivery. Strategies such as surface modification and incorporating stimuli-responsive elements enhanced NG performance and addressed specific therapeutic challenges. Advances in nanotechnology, biomaterials, and targeted drug design offer opportunities to improve the performance of NGs and address current limitations. Tailoring NGs for exploring combination therapies and integrating diagnostics for real-time monitoring represent promising avenues for future research. In conclusion, NG drug delivery systems have demonstrated tremendous potential in diverse disease applications. Overcoming challenges and leveraging emerging technologies will pave the way for their widespread clinical implementation, ushering in a new era of precision medicine and improved patient care.

Chitosan-based biomaterial delivery strategies for hepatocellular carcinoma

BackgroundHepatocellular carcinoma accounts for 80% of primary liver cancers, is the most common primary liver malignancy. Hepatocellular carcinoma is the third leading cause of tumor-related deaths worldwide, with a 5-year survival rate of approximately 18%. Chemotherapy, although commonly used for hepatocellular carcinoma treatment, is limited by systemic toxicity and drug resistance. Improving targeted delivery of chemotherapy drugs to tumor cells without causing systemic side effects is a current research focus. Chitosan, a biopolymer derived from chitin, possesses good biocompatibility and biodegradability, making it suitable for drug delivery. Enhanced chitosan formulations retain the anti-tumor properties while improving stability. Chitosan-based biomaterials promote hepatocellular carcinoma apoptosis, exhibit antioxidant and anti-inflammatory effects, inhibit tumor angiogenesis, and improve extracellular matrix remodeling for enhanced anti-tumor therapy.MethodsWe summarized published experimental papers by querying them.Results and ConclusionsThis review discusses the physicochemical properties of chitosan, its application in hepatocellular carcinoma treatment, and the challenges faced by chitosan-based biomaterials.

Synthesis, Optimization and Molecular Self-Assembly Behavior of Alginate-g-Oleylamine Derivatives Based on Ugi Reaction for Hydrophobic Drug Delivery

To achieve the optimal alginate-based oral formulation for delivery of hydrophobic drugs, on the basis of previous research, we further optimized the synthesis process parameters of alginate-g-oleylamine derivatives (Ugi-FOlT) and explored the effects of different degrees of substitution (DSs) on the molecular self-assembly properties of Ugi-FOlT, as well as the in vitro cytotoxicity and drug release behavior of Ugi-FOlT. The resultant Ugi-FOlT exhibited good amphiphilic properties with the critical micelle concentration (CMC) ranging from 0.043 mg/mL to 0.091 mg/mL, which decreased with the increase in the DS of Ugi-FOlT. Furthermore, Ugi-FOlT was able to self-assemble into spherical micellar aggregates in aqueous solution, whose sizes and zeta potentials with various DSs measured by dynamic light scattering (DLS) were in the range of 653 ± 25~710 ± 40 nm and −58.2 ± 1.92~−48.9 ± 2.86 mV, respectively. In addition, RAW 264.7 macrophages were used for MTT assay to evaluate the in vitro cytotoxicity of Ugi-FOlT in the range of 100~500 μg/mL, and the results indicated good cytocompatibility for Ugi-FOlT. Ugi-FOlT micellar aggregates with favorable stability also showed a certain sustained and pH-responsive release behavior for the hydrophobic drug ibuprofen (IBU). Meanwhile, it is feasible to control the drug release rate by regulating the DS of Ugi-FOlT. The influence of different DSs on the properties of Ugi-FOlT is helpful to fully understand the relationship between the micromolecular structure of Ugi-FOlT and its macroscopic properties.

The elasticity of silicone-stabilized liposomes has no impact on their in vivo behavior

BackgroundThe elastomechanical properties of nanocarriers have recently been discussed as important for the efficient delivery of various therapeutics. Some data indicate that optimal nanocarriers’ elasticity can modulate in vivo nanocarrier stability, interaction with phagocytes, and uptake by target cells. Here, we presented a study to extensively analyze the in vivo behavior of LIP-SS liposomes that were modified by forming the silicone network within the lipid bilayers to improve their elastomechanical properties. We verified liposome pharmacokinetic profiles and biodistribution, including retention in tumors on a mouse model of breast cancer, while biocompatibility was analyzed on healthy mice.ResultsWe showed that fluorescently labeled LIP-SS and control LIP-CAT liposomes had similar pharmacokinetic profiles, biodistribution, and retention in tumors, indicating that modified elasticity did not improve nanocarrier in vivo performance. Interestingly, biocompatibility studies revealed no changes in blood morphology, liver, spleen, and kidney function but indicated prolonged activation of immune response manifesting in increased concentration of proinflammatory cytokines in sera of animals exposed to all tested liposomes.ConclusionIncorporating the silicone layer into the liposome structure did not change nanocarriers’ characteristics in vivo. Further modification of the LIP-SS surface, including decoration with hydrophilic stealth polymers, should be performed to improve their pharmacokinetics and retention in tumors significantly. Activation of the immune response by LIP-SS and LIP-CAT, resulting in elevated inflammatory cytokine production, requires detailed studies to elucidate its mechanism.Graphical

Transport cocktails for cancer therapeutics

Beyond biological cell heterogeneity, evidenced by different resistances to therapeutics, “delivery heterogeneity” crucially limits treatment efficacy for advanced solid tumors: variations in therapeutic drug delivery to different tumor areas (perivascular, perinecrotic) leading to nonuniform drug concentrations/doses and to unsuccessful treatment (cancer cell kill). Short-range (40–80 µm), high energy (1–5 MeV) α particles successfully address the biological heterogeneity: the double-strand DNA breaks they cause make them impervious to cell resistance mechanisms. Multiresponsive nanocarriers and/or engineered antibody-drug-conjugates are elegant approaches to delivering such α-particle emitters. Delivery heterogeneity, however, remains a challenge in established (i.e., large, vascularized) tumors. Remarkably, delivery properties enabling efficacy at the cell scale (targeting selectivity, affinity, cell drug uptake) may act against spatial delivery uniformity at the tumor scale (binding-site barrier effect). We have previously demonstrated, in different mouse models, that spatial delivery uniformity, key to the effective killing of solid tumors, can be achieved utilizing combinations of different, distinct delivery carriers of the same emitter, but with different, complementary delivery properties, “leaving no cancer cell behind.” We build first principles reaction-transport models (quantitatively informed by experiments) that explain the “geographically complementary” behaviors of such carrier cocktails, and help optimally design these cocktails and their delivery protocols. Published by the American Physical Society 2024

Novel Approach for Cardioprotection: In Situ Targeting of Metformin via Conductive Hydrogel System

Ischemia/reperfusion (I/R) injury following myocardial infarction is a major cause of cardiomyocyte death and impaired cardiac function. Although clinical data show that metformin is effective in repairing cardiac I/R injury, its efficacy is hindered by non-specific targeting during administration, a short half-life, frequent dosing, and potential adverse effects on the liver and kidneys. In recent years, injectable hydrogels have shown substantial potential in overcoming drug delivery challenges and treating myocardial infarction. To this end, we developed a natural polymer hydrogel system comprising methacryloylated chitosan and methacryloylated gelatin modified with polyaniline conductive derivatives. In vitro studies demonstrated that the optimized hydrogel exhibited excellent injectability, biocompatibility, biodegradability, suitable mechanical properties, and electrical conductivity. Incorporating metformin into this hydrogel significantly extended the administration cycle, mitigated mitochondrial damage, decreased abnormal ROS production, and enhanced cardiomyocyte function. Animal experiments indicated that the metformin/hydrogel system reduced arrhythmia incidence, infarct size, and improved cardiac mitochondrial and overall cardiac function, promoting myocardial repair in I/R injury. Overall, the metformin-loaded conductive hydrogel system effectively mitigates mitochondrial oxidative damage and improves cardiomyocyte function, thereby offering a theoretical foundation for the potential application of metformin in cardioprotection.

Application and Development of Cell Membrane Functionalized Biomimetic Nanoparticles in the Treatment of Acute Ischemic Stroke

Ischemic stroke is a serious neurological disease involving multiple complex physiological processes, including vascular obstruction, brain tissue ischemia, impaired energy metabolism, cell death, impaired ion pump function, and inflammatory response. In recent years, there has been significant interest in cell membrane-functionalized biomimetic nanoparticles as a novel therapeutic approach. This review comprehensively explores the mechanisms and importance of using these nanoparticles to treat acute ischemic stroke with a special emphasis on their potential for actively targeting therapies through cell membranes. We provide an overview of the pathophysiology of ischemic stroke and present advances in the study of biomimetic nanoparticles, emphasizing their potential for drug delivery and precision-targeted therapy. This paper focuses on bio-nanoparticles encapsulated in bionic cell membranes to target ischemic stroke treatment. It highlights the mechanism of action and research progress regarding different types of cell membrane-functionalized bi-onic nanoparticles such as erythrocytes, neutrophils, platelets, exosomes, macrophages, and neural stem cells in treating ischemic stroke while emphasizing their potential to improve brain tissue’s ischemic state and attenuate neurological damage and dysfunction. Through an in-depth exploration of the potential benefits provided by cell membrane-functionalized biomimetic nanoparticles to improve brain tissue’s ischemic state while reducing neurological injury and dysfunction, this study also provides comprehensive research on neural stem cells’ potential along with that of cell membrane-functionalized biomimetic nanoparticles to ameliorate neurological injury and dysfunction. However, it is undeniable that there are still some challenges and limitations in terms of biocompatibility, safety, and practical applications for clinical translation.

A potent formula against triple-negative breast cancer-sorafenib-carbon nanotubes-folic acid: Targeting, apoptosis triggering, and bioavailability enhancing.

Triple-negative breast cancer (TNBC) has short survival rates. This study aimed to prepare a novel formula of sorafenib, carbon nanotubes (CNTs), and folic acid to be tested as a drug delivery system targeting versus TNBC compared with free sorafenib and to evaluate the formula stability, in vitro pharmacodynamic, and in vivo pharmacokinetic properties. The formula preparation was done by the synthesis of polyethylene glycol bis amine linker, CNT PEGylation, folic acid attachment, and sorafenib loading. The prepared formula has been characterized using X-ray diffraction, Flourier-transform infrared, 1HNMR, UV, high resolution-transmission electron microscope, field emission scanning electron microscopy, and Zeta potential. In vitro studies included drug release determination, MTT assay, flow cytometry to determine the apoptotic stage with percent, cell cycle analysis, and apoptotic marker assays for caspase-3, 8, 9, cytochrome c, and BCL-2. The in vivo study was performed to determine bioavailability and half-life in rats. The in vitro MTT antiproliferative assay revealed that the formula was threefold more cytotoxic toward TNBC cells than free sorafenib, and the flow cytometry showed a significant increase in apoptosis and necrosis. The formula has a greater inhibitory effect on BCL-2 and a lessening effect on cytochrome c and caspases 3, 8, and 9 than free sorafenib. In vivo experiments proved that our novel formula was superior to free sorafenib by increasing bioavailability by eight times and prolonging the half-life by three times. These results confirmed the successful preparation of the desired formula with better pharmacodynamic and pharmacokinetic properties. These promising results may show a novel therapeutic strategy for TNBC patients.

Enhanced breast cancer therapy using multifunctional lipid-coated nanoparticles combining curcumin chemotherapy and nitric oxide gas delivery

The limitations associated with conventional cancer treatment modalities, particularly for breast cancer, underscore the imperative for developing safer and more productive drug delivery systems. A promising strategy that has emerged is the combination of chemotherapy with gas therapy. We synthesized curcumin-loaded amorphous calcium carbonate nanoparticles (Cur-CaCO3) via a gas diffusion reaction in the present study. Subsequently, a "one-step" ethanol injection method was employed to fabricate lipid-coated calcium carbonate nanoparticles (Cur-CaCO3@LA-Lip) loaded with L-arginine, aimed at harnessing the synergistic effects of chemotherapy and nitric oxide to enhance antitumor efficacy. Transmission electron microscopy analysis revealed that Cur-CaCO3@LA-Lip nanoparticles were subspherical with a distinct lipid layer encapsulating the periphery. Fourier transform infrared spectroscopy, X-ray powder diffraction, and differential scanning calorimetry results confirmed the successful synthesis of Cur-CaCO3@LA-Lip. The nanoparticles exhibited significant drug loading capacities of 8.89% for curcumin and 3.1% for L-arginine. In vitro and in vivo assessments demonstrated that Cur-CaCO3@LA-Lip nanoparticles facilitated sustained release of curcumin and exhibited high cellular uptake, substantial tumor accumulation, and excellent biocompatibility. Additionally, the nanoparticles showed robust cytotoxicity and potent antitumor efficacy, suggesting their potential as a formidable candidate for breast cancer therapy.

γ-Butyrolactone Derivatives of MSA-2 are STING Prodrugs.

STING agonists are potent enhancers of a pro-inflammatory response and, thus, potentially useful therapeutics. Unfortunately, many agonists developed to date require complex drug delivery formulations and often have poor water solubility, limiting their use for systemic administration. Here, we report the discovery and chemical characterization of lactones of MSA-2 as new STING prodrugs with enhanced properties. We show that these prodrugs form efficient inclusion complexes with tumor myeloid cell targeting cyclodextrin nanoparticles and propose a new mechanism of formation and hydrolysis.

Self-assembled α-lactalbumin nanostructures: encapsulation and controlled release of bioactive molecules in gastrointestinal in vitro model.

Implementing encapsulation techniques is pivotal in safeguarding bioactive molecules against environmental conditions for drug delivery systems. Moreover, the food-grade nanocarrier is a delivery system and food ingredient crucial in creating nutraceutical foods. Nano α-lactalbumin has been shown to be a promissory nanocarrier for hydrophobic molecules. Furthermore, the nanoprotein can enhance the tecno-functional properties of food such as foam and emulsion. The present study investigated the nanostructured α-lactalbumin protein (nano α-la) as a delivery and controlled release system for bioactive molecules in a gastric-intestinal in vitro mimic system. The nano α-la was synthesized by a low self-assembly technique, changing the solution ionic strength by NaCl and obtaining nano α-la 191.10 ± 21.33 nm and a spherical shape. The nano α-la showed higher encapsulation efficiency and loading capacity for quercetin than riboflavin, a potential carrier for hydrophobic compounds. Thermal analysis of nano α-la resulted in a ΔH of -1480 J g-1 for denaturation at 57.44 °C. The nanostructure formed by self-assembly modifies the foam volume increment and stability. Also, differences between nano and native proteins in emulsion activity and stability were noticed. The release profile in vitro showed that the nano α-la could not hold the molecules in gastric fluid. The Weibull and Korsmeyer-Peppas model better fits the release profile behavior in the studied fluids. The present study shows the possibility of nano α-la as an alternative to molecule delivery systems and nutraceutical foods' formulation because of the high capacity to encapsulate hydrophobic molecules and the improvement of techno-functional properties. However, the nanocarrier is not perfectly suitable for the sustainable delivery of molecules in the gastrointestinal fluid, demanding improvements in the nanocarrier. © 2024 Society of Chemical Industry.

Nanomaterials that Aid in the Diagnosis and Treatment of Alzheimer's Disease, Resolving Blood-Brain Barrier Crossing Ability.

As a form of dementia, Alzheimer's disease (AD) suffers from no efficacious cure, yet AD treatment is still imperative, as it ameliorates the symptoms or prevents it from deteriorating or maintains the current status to the longest extent. The human brain is the most sensitive and complex organ in the body, which is protected by the blood-brain barrier (BBB). This yet induces the difficulty in curing AD as the drugs or nanomaterials that are much inhibited from reaching the lesion site. Thus, BBB crossing capability of drug delivery system remains a significant challenge in the development of neurological therapeutics. Fortunately, nano-enabled delivery systems possess promising potential to achieve multifunctional diagnostics/therapeutics against various targets of AD owing to their intriguing advantages of nanocarriers, including easy multifunctionalization on surfaces, high surface-to-volume ratio with large payloads, and potential ability to cross the BBB, making them capable of conquering the limitations of conventional drug candidates.This review, which focuses on the BBB crossing ability of the multifunctional nanomaterials in AD diagnosis and treatment, will provide an insightful vision that is conducive to the development of AD-related nanomaterials.