Delay-and-sum Research Articles

Expanding generalized contrast-to-noise ratio into a clinically relevant measure of lesion detectability by considering size and spatial resolution.

Early image quality metrics were often designed with clinicians in mind, and ideal metrics would correlate with the subjective opinion of practitioners. Over time, adaptive beamformers and other post-processing methods have become more common, and these newer methods often violate assumptions of earlier image quality metrics, invalidating the meaning of those metrics. The result is that beamformers may "manipulate" metrics without producing more clinical information. In this work, Smith etal.'s signal-to-noise ratio (SNR) metric for lesion detectability is considered, and a more robust version, here called generalized SNR (gSNR), is proposed that uses generalized contrast-to-noise ratio (gCNR) as a core. It is analytically shown that for Rayleigh distributed data, gCNR is a function of Smith etal.'s (and therefore can be used as a substitution). More robust methods for estimating the resolution cell size are considered. Simulated lesions are included to verify the equations and demonstrate behavior, and it is shown to apply equally well to in vivo data. gSNR is shown to be equivalent to SNR for delay-and-sum (DAS) beamformed data, as intended. However, it is shown to be more robust against transformations and report lesion detectability more accurately for non-Rayleigh distributed data. In the simulation included, the SNR of DAS was , and minimum variance (MV) was , but the gSNR of DAS was , and MV was , which agrees with the subjective assessment of the image. Likewise, the transformation (which is clinically identical to DAS) had an incorrect SNR of and a correct gSNR of . Similar results are shown in vivo. Using gCNR as a component to estimate gSNR creates a robust measure of lesion detectability. Like SNR, gSNR can be compared with the Rose criterion and may better correlate with clinical assessments of image quality for modern beamformers.

Enhancing Ischemic Stroke Evaluation by a Model-Based Photoacoustic Tomography Algorithm.

Ischemic stroke (IS) is characterized by the sudden interruption of blood supply to the brain, resulting in neurological impairments and even mortality. Photoacoustic computed tomography (PACT) integrates the high contrast of optical imaging and the penetration of ultrasound imaging, enabling non-invasive IS evaluation. However, the image reconstruction quality significantly affects the oxyhemoglobin saturation (sO2) estimation. This study investigates a model-based with total variation minimized by augmented Lagrangian and alternating direction (MB-TVAL3) approach and compared it with the widely used back-projection (BP) and delay-and-sum (DAS) algorithms. Both simulations and invivo experiments are conducted to validate the performance of the MB-TVAL3 algorithm, showing a higher sO2 estimation accuracy and sensitivity in detecting infarct area compared to BP and DAS. The findings of this study emphasize the impact of acoustic inverse problem on the accuracy of sO2 estimation and the proposed approach offers valuable support for IS evaluation and cerebrovascular diagnosis.

Beamforming-integrated neural networks for ultrasound imaging

Sparse matrix beamforming (SMB) is a computationally efficient reformulation of delay-and-sum (DAS) beamforming as a single sparse matrix multiplication. This reformulation can potentially dovetail with machine learning platforms like TensorFlow and PyTorch that already support sparse matrix operations. In this work, using SMB principles, we present the development of beamforming-integrated neural networks (BINNs) that can rationally infer ultrasound images directly from pre-beamforming channel-domain radiofrequency (RF) datasets. To demonstrate feasibility, a toy BINN was first designed with two 2D-convolution layers that were respectively placed both before and after an SMB layer. This toy BINN correctly updated kernel weights in all convolution layers, demonstrating efficiency in both training (PyTorch – 133 ms, TensorFlow – 22 ms) and inference (PyTorch – 4 ms, TensorFlow – 5 ms). As an application demonstration, another BINN with two RF-domain convolution layers, an SMB layer, and three image-domain convolution layers was designed to infer high-quality B-mode images in vivo from single-shot plane-wave channel RF data. When trained using 31-angle compounded plane wave images (3000 frames from 22 human volunteers), this BINN showed mean-square logarithmic error improvements of 21.3 % and 431 % in the inferred B-mode image quality respectively comparing to an image-to-image convolutional neural network (CNN) and an RF-to-image CNN with the same number of layers and learnable parameters (3,777). Overall, by including an SMB layer to adopt prior knowledge of DAS beamforming, BINN shows potential as a new type of informed machine learning framework for ultrasound imaging.

Fully Complex-Valued Gated Recurrent Neural Network for Ultrasound Imaging.

Ultrasound imaging is widely used in medical diagnosis. It has the advantages of being performed in real time, cost-efficient, noninvasive, and nonionizing. The traditional delay-and-sum (DAS) beamformer has low resolution and contrast. Several adaptive beamformers (ABFs) have been proposed to improve them. Although they improve image quality, they incur high computation cost because of the dependence on data at the expense of real-time performance. Deep-learning methods have been successful in many areas. They train an ultrasound imaging model that can be used to quickly handle ultrasound signals and construct images. Real-valued radio-frequency signals are typically used to train a model, whereas complex-valued ultrasound signals with complex weights enable the fine-tuning of time delay for enhancing image quality. This work, for the first time, proposes a fully complex-valued gated recurrent neural network to train an ultrasound imaging model for improving ultrasound image quality. The model considers the time attributes of ultrasound signals and uses complete complex-number calculation. The model parameter and architecture are analyzed to select the best setup. The effectiveness of complex batch normalization is evaluated in training the model. The effect of analytic signals and complex weights is analyzed, and the results verify that analytic signals with complex weights enhance the model performance to reconstruct high-quality ultrasound images. The proposed model is finally compared with seven state-of-the-art methods. Experimental results reveal its great performance.

Broadband nonlinear delay and sum (NL-DAS) for baseline-free damage imaging using a sparse sensor network

The Delay and Sum (DAS) method is a well-known damage imaging technique in sparse array guided wave imaging. However, the DAS method requires prior knowledge on the stable baseline state, which makes it ineffective under different operational or environmental conditions, e.g. temperature and moisture, and altered experimental settings, e.g. degraded bonding quality of sensors.This paper proposes a Nonlinear Delay and Sum (NL-DAS) method which does not require prior knowledge about the baseline state, but instead exploits the presence of nonlinear wave/defect interactions. Relatively high-power broadband sweep sine signals are supplied to a sparse sensor array to activate a multitude of nonlinear wave/defect interactions. Application of time–frequency filtering to the response signals allows the isolation of damage-induced broadband nonlinear responses. The isolated broadband nonlinear response signals are subsequently decomposed into a series of narrowband tone burst responses from which a set of damage maps are constructed. To improve the quality of the constructed damage maps, an automated framework is proposed to obtain the frequency-dependent directional group velocities without requiring prior knowledge on material properties. Finally, the resulting set of damage maps is fused into a single broadband NL-DAS damage map.The proposed broadband NL-DAS approach is demonstrated on a simulation dataset, generated with 3D Finite Element method, which is representative for a cross-ply carbon fiber reinforced polymer (CFRP) containing a delamination defect. The damage imaging performance is studied for different test conditions in terms of (i) signal-to-noise ratio, (ii) number of sensors and (iii) excitation bandwidth. Experimental validation is illustrated on a CFRP plate containing a barely visible impact damage, and on a CFRP A320 component with a disbond at one of the stiffeners.

Quantitative detection of axial defects in pipelines based on modified multi-mode total focusing method (MTFM)

The axial defects in pipelines are hard to detect effectively with the conventional multi-mode total focusing method (MTFM). The inner and outer curved surfaces of pipelines induce beam divergence, reducing focusing performance and introducing imaging distortion and errors. In this paper, the MTFM employed for inspecting flat plates is modified in consideration of the influences of pipe curvature on the ray paths of direct, half-skip and full-skip mode waves. The corresponding travel times are recalculated and used for performing delay-and-sum (DAS) beamforming, achieving the profile reconstruction and quantitative detection of axial defects. The simulation and experiments were implemented on the carbon steel pipeline with 100 mm outer radius and 20 mm wall thickness. The phased array (PA) probe with 32 elements and 5 MHz central frequency and the 55° curved wedge were adopted to detect the inner-wall axial defects in pipeline. The profiles of the planar defects with a length of 5 mm and orientation angles of −45°∼45° were well reconstructed by modified MTFM, and the measurement errors of flaw lengths, orientation angles and tip depths were no more than 16.6 %, 5.1° and 4.0 % after correction, respectively. Further simulated and experimental results indicate that the internal axial defects can also be detected and quantified by modified MTFM. Finally, the influences of pipe curvature on modified MTFM are discussed by simulation.

Fourier-based beamforming for 3D plane wave imaging and application in vector flow imaging using selective compounding

Objective. Ultrafast ultrasound imaging using planar or diverging waves for transmission is a promising approach for efficient 3D imaging with matrix arrays. This technique has advantages for B-mode imaging and advanced techniques, such as 3D vector flow imaging (VFI). The computation load of the cross-beam technique is associated with the number of transmit anglesmand receive anglesn. The full velocity vector is obtained using the least square fashion. However, the beamforming is repeatedm × ntimes using a conventional time-domain delay-and-sum (DAS) beamformer. In the 3D case, the collection and processing of data from different beams increase the amount of data that must be processed, requiring more storage capacity and processing power. Furthermore, the large computation complexity of DAS is another major concern. These challenges translate into longer computational times, increased complexity in data processing, and difficulty in real-time applications.Approach. In response to this issue, this study proposes a novel Fourier domain beamformer for 3D plane wave imaging, which significantly increases the computational speed. Additionally, a selective compounding strategy is proposed for VFI, which reduces the beamforming process fromm × ntom(wheremandnrepresent the number of transmission and reception, respectively), effectively shortening the processing time. The underlying principle is to decompose the receive wavefront into a series of plane waves with different slant angles. Each slant angle can produce a sub-volume for coherent or selective compounding. This method does not rely on the assumption that the plane wave is perfect and the results show that our proposed beamformer is better than DAS in terms of resolution and image contrast. In the case of velocity estimation, for the Fourier-based method, only Tx angles are assigned in the beamformer and the selective compounding method produces the final image with a specialized Rx angle.Main results. Simulation studies andin vitroexperiments confirm the efficacy of this new method. The proposed beamformer shows improved resolution and contrast performance compared to the DAS beamformer for B-mode imaging, with a suppressed sidelobe level. Furthermore, the proposed technique outperforms the conventional DAS method, as evidenced by lower mean bias and standard deviation in velocity estimation for VFI. Notably, the computation time has been shortened by 40 times, thus promoting the real-time application of this technique. The efficacy of this new method is verified through simulation studies andin vitroexperiments and evaluated by mean bias and standard deviation. Thein vitroresults reveal a better velocity estimation: the mean bias is 2.3%, 3.4%, and 5.0% forvx,vy, andvz, respectively. The mean standard deviation is 1.8%, 1.7%, and 3.4%. With DAS, the evaluated mean bias is 9.8%, 4.6%, and 6.7% and the measured mean standard deviation is 7.5%, 2.5%, and 3.9%.Significance. In this work, we propose a novel Fourier-based method for both B-mode imaging and functional VFI. The new beamformer is shown to produce better image quality and improved velocity estimation. Moreover, the new VFI computation time is reduced by 40 times compared to conventional methods. This new method may pave a new way for real-time 3D VFI applications.

Improved subarray coherence factor beamformer for ultrasound plane-wave imaging

Abstract Coherent plane-wave compounding (CPWC) has gained significant traction in medical ultrasound imaging. The coherence factor (CF) weighting algorithm, a classical adaptive beamforming strategy, aims to enhance the CPWC imaging lateral resolution, but it also noticeably compromises the speckle patterns, particularly.at a low signal-to-noise ratio (SNR). Delay multiply and sum (DMAS) has been proposed to reduce side lobes. However, the reconstructed image quality with DMAS is limited in terms of resolution and speckle level. In the present study, an improved subarray coherence factor (ISCF) algorithm is introduced by combining CF with DMAS strategies, aiming to improve the contrast and resolution while preserving the speckle level. The performance of the proposed algorithm is evaluated using simulation and phantom datasets. Results indicate that the resolution and the contrast of ISCF can be improved by 41.6% and 79.4%, respectively; compared with delay and sum (DAS) algorithm. Additionally, the resolution and the speckle level of ISCF can be improved by 10.6% and 35.7% compared with CF algorithm, respectively. The proposed ISCF algorithm outperforms CF in terms of resolution, contrast, and speckle preservation.

High-Resolution Power Doppler Using Null Subtraction Imaging.

To improve the spatial resolution of power Doppler (PD) imaging, we explored null subtraction imaging (NSI) as an alternative beamforming technique to delay-and-sum (DAS). NSI is a nonlinear beamforming approach that uses three different apodizations on receive and incoherently sums the beamformed envelopes. NSI uses a null in the beam pattern to improve the lateral resolution, which we apply here for improving PD spatial resolution both with and without contrast microbubbles. In this study, we used NSI with three types of singular value decomposition (SVD)-based clutter filters and noise equalization to generate high-resolution PD images. An element sensitivity correction scheme was also proposed as a crucial component of NSI-based PD imaging. First, a microbubble trace experiment was performed to evaluate the resolution improvement of NSI-based PD over traditional DAS-based PD. Then, both contrast-enhanced and contrast free ultrasound PD images were generated from the scan of a rat brain. The cross-sectional profile of the microbubble traces and microvessels were plotted. FWHM was also estimated to provide a quantitative metric. Furthermore, iso-frequency curves were calculated to provide a resolution evaluation metric over the global field of view. Up to six-fold resolution improvement was demonstrated by the FWHM estimate and four-fold resolution improvement was demonstrated by the iso-frequency curve from the NSI-based PD microvessel images compared to microvessel images generated by traditional DAS-based beamforming. A resolvability of [Formula: see text] was measured from the NSI-based PD microvessel image. The computational cost of NSI-based PD was only increased by 40 percent over the DAS-based PD.

2D spatiotemporal passive cavitation imaging and evaluation during ultrasound thrombolysis based on diagnostic ultrasound platform

Acoustic cavitation plays a critical role in various biomedical applications. However, uncontrolled cavitation can lead to undesired damage to healthy tissues. Therefore, real-time monitoring and quantitative evaluation of cavitation dynamics is essential for understanding underlying mechanisms and optimizing ultrasound treatment efficiency and safety. The current research addressed the limitations of traditionally used cavitation detection methods by developing introduced an adaptive time-division multiplexing passive cavitation imaging (PCI) system integrated into a commercial diagnostic ultrasound platform. This new method combined real-time cavitation monitoring with B-mode imaging, allowing for simultaneous visualization of treatment progress and 2D quantitative evaluation of cavitation dosage within targeted area. An improved delay-and-sum (DAS) algorithm, optimized with a minimum variance (MV) beamformer, is utilized to minimize the side lobe effect and improve the axial resolution typically associated with PCI. In additional to visualize and quantitatively assess the cavitation activities generated under varied acoustic pressures and microbubble concentrations, this system was specifically applied to perform 2D cavitation evaluation for ultrasound thrombolysis mediated by different solutions, e.g., saline, nanodiamond (ND) and nitrogen-annealed nanodiamond (N-AND). This research aims to bridge the gap between laboratory-based research systems and real-time spatiotemporal cavitation evaluation demands in practical uses. Results indicate that this improved 2D cavitation monitoring and evaluation system could offer a useful tool for comprehensive evaluating cavitation-mediated effects (e.g., ultrasound thrombolysis), providing valuable insights into in-depth understanding of cavitation mechanisms and optimization of cavitation applications.

Vessel recovery using ultrasound localisation microscopy: An in silico comparative study between minimum variance and delay-and-sum beamformers

The use of particle localisation and tracking algorithms on Contrast Enhanced Ultrasound (CEUS) or other ultrasound mode image data containing sparse microbubble (MB) populations, can produce super-resolved vascularization maps. Typically such data stem from conventional delay and sum (DAS) beamforming that is used widely in ultrasound imaging modes. Recently, adaptive beamforming has shown significant improvement in spatial resolution, but its value to super-resolution image analysis approaches is not fully understood. The in silico study here evaluates the performance of combining minimum variance beamformers (MV BF), established to provide improved lateral resolution, compared to DAS BFs with single particle detection. The isolated effect of a range of simplified image-affecting factors such as flow profile, pulse length, noise, vessel separations and data availability is considered. The study aims to assess the vessel recovery performance using the different beamformers and investigate the link with MB detection and localisation. The MV BF was shown to provide improved microvessel position accuracy compared to conventional DAS BFs. In particular, vessel separations between 0.3–4 λ provided superior localisation uncertainty with the MV. In addition, for a separation of 0.36λ, vessel recovery was achieved with both methods but the use of MV eliminated artifacts that appear as additional vessels. These results were found to be linked to improved MB detection and localisation for the MV BF, which is proposed as suitable for testing in Ultrasound Localisation Microscopy (ULM) imaging using patient data.

Adaptive complementary neighboring sub-aperture beamforming for thermoacoustic imaging.

When applied to thermoacoustic imaging (TAI), the delay-and-sum (DAS) algorithm produces strong sidelobes due to its disadvantages of uniform aperture weighting. As a result, the quality of TAI images recovered by DAS is often severely degraded by strong non-coherent clutter, which restricts the development and application of TAI. To address this issue, we propose an adaptive complementary neighboring sub-aperture (NSA) beamforming algorithm for TAI. In NSA, we introduce a coordinate system transformation when calculating the normalized cross-correlation (NCC) matrix. This approach enables the computation of the NCC coefficient within the specified kernel without complex coordinate calculations. We first conducted the numerical simulation experiment to validate NSA using a tree branch phantom. In addition, we also conducted phantom (five sauce tubes), ex vivo (ablation needle in ex vivo porcine liver), and in vivo (human arm) TAI experiments using our TAI system with a center frequency of 3GHz. In the numerical simulation experiment, the structural similarity index (SSIM) value for NSA is increased from 0.37828 for DAS to 0.75492. In the point target phantom TAI experiment, the generalized contrast-to-noise ratio (gCNR) value for NSA is increased from 0.936 for DAS to 0.962. The experimental results show that NSA can recover clearer thermoacoustic images compared to DAS. In the ex vivo TAI experiment, the full width at half maxima (FWHM) of an ablation needle (diameter=1.5mm) for coherence factor (CF) weighted DAS and NSA are 0.9 and 1.3mm, respectively. Furthermore, in the in vivo TAI experiment, CF reduces the signals within the arm compared to NSA. Therefore, compared with CF, NSA can maintain the integrity of target information in TAI while effectively suppressing non-coherent background clutter. NSA can effectively reduce non-coherent background noise while ensuring the completeness of the target information. So, NSA offers the potential to provide high-quality thermoacoustic images and further advance their clinical application.

High-resolution defect imaging of composites using delay-sum-and-square beamforming algorithm

Abstract High-resolution ultrasonic imaging for defects in anisotropic multilayer carbon fiber reinforced polymers (CFRPs) is challenging because of the severe ultrasonic attenuation and the low signal-to-noise ratio (SNR) of echoes. The existing delay-multiply-and-sum (DMAS) beamforming outperforms delay-and-sum (DAS) beamforming in resolution, but with high computational complexity and energy loss. This paper presents a novel delay-sum-and-square (DSAS) beamforming algorithm. It takes full advantage of spatial coherence of captured data in the receiving and transmitting apertures. The non-coherent components caused by background noise are suppressed during the imaging. The back-wall reflection method (BRM) is used to correct the direction-dependent velocity. Full-matrix data is experimentally captured and processed on three different CFRP samples. Compared with DAS and DMAS, DSAS has a significant improvement in resolution, SNR and contrast. It demonstrates excellent defect characterization and noise suppression capability with only 17.4% computation time of DMAS.

Research on Delamination Damage Localization of Carbon Fiber-Reinforced Polymer Curved Plate Using Lamb Wave

Carbon fiber-reinforced polymers (CFRPs) are extensively employed in the aerospace industry due to their excellent properties. Delamination damage occurring at critical locations in CFRPs can seriously reduce the safety of in-service components. The detection and localization of delamination damage using Lamb waves hold significant potential for widespread application in non-destructive testing. However, the choice of damage localization algorithm may produce different delamination damage localization results. This research presented an IRAPID (improved reconstruction algorithm for probabilistic inspection of defects) method derived from the RAPID (reconstruction algorithm for probabilistic inspection of defects) method, aiming to improve the accuracy and reliability of delamination damage localization. Three CFRP curved plates, including a healthy curved plate and two curved plates with delamination damage sizes of Φ20 mm and Φ40 mm, were prepared in the experiment. The detection experiment of the CFRP curved plate using lead zirconate titanate (PZT) as a transducer to excite and receive Lamb waves was conducted, and the influence of excitation signal frequency on the performance of the proposed method was discussed. Under the condition of an excitation signal frequency of 220~320 kHz and a step size of 10 kHz, the accuracy of the delamination damage localization method proposed in this paper was compared with that of existing methods. The experimental results indicate that the IRAPID algorithm exhibits good stability in the localization of delamination damage across the range of frequency variations considered. The localization error of the IRAPID algorithm for delamination damage is significantly lower than that of the DaS (delay-and-sum) algorithm and the RAPID algorithm. As the size of the delamination damage increases, so does the localization error. The accuracy of delamination damage localization is lower in the X-axis direction than in the Y-axis direction. By averaging the localization results across various frequencies, we can mitigate the potential localization errors associated with single-frequency detection to a certain extent. For the localization of delamination damage, Lamb waves at multiple frequencies can be employed for detection, and the detection results at each frequency are averaged to enhance the reliability of localization.

A New Method of Plane-Wave Ultrasound Imaging Based on Reverse Time Migration.

Coherent plane-wave compounding technique enables rapid ultrasound imaging with comparable image quality to traditional B-mode imaging that relies on focused beam transmission. However, existing methods assume homogeneity in the imaged medium, neglecting the heterogeneity in sound velocities and densities present in real tissues, resulting in noise reverberation. This study introduces the Reverse Time Migration (RTM) method for ultrasound plane-wave imaging to overcome this limitation, which is combined with a method for estimating the speed of sound in layered media. Simulation results in a homogeneous background demonstrate that RTM reduces side lobes and grating lobes by approximately 30 dB, enhancing the contrast-to-noise ratio by 20% compared to conventional delay and sum (DAS) beamforming. Moreover, RTM achieves superior imaging outcomes with fewer compounding angles. The lateral resolution of the RTM with 5-9 angle compounding is able to achieve the effectiveness of the DAS method with 15-19 angle compounding, and the CNR of the RTM with 11-angle compounding is almost the same as that of the DAS with 21-angle compounding. In a heterogeneous background, experimental simulations and in vitro wire phantom experiments confirm RTM's capability to correct depth imaging, focusing reflected waves on point targets. In vitro porcine tissue experiments enable accurate imaging of layer interfaces by estimating the velocities of multiple layers containing muscle and fat. The proposed imaging procedure optimizes velocity estimation in complex media, compensates for the impact of velocity differences, provides more reliable imaging results.

Deep LSTM-based autoencoder for CFRP damage imaging using Lamb wave and correlation factor weighted delay-and-sum algorithm

The ultrasonic Lamb wave testing (ULWT) has proven valuable in non-destructive testing (NDT) due to its high sensitivity and wide coverage. However, the classical post-processing algorithm, the delay-and-sum (DAS) technique, suffers from notable artifacts and inadequate accuracy in Lamb wave inspection due to the existence of reflection and superposition, especially on composite materials. In this study, we proposed a novel algorithm, the correlation factor weighted DAS imaging algorithm based on the Long short-term memory-autoencoder (LSTM-AE), to address these deterioration issues. The LSTM-AE demonstrates the capability to extract potential features and accurately reconstruct input signals. By incorporating the concept of anomaly detection, an LSTM-AE trained with intact signals produces a significantly distorted output when exposed to damaged signals as input. We formulated a novel damage index (DI) based on the Pearson Correlation Coefficient (PCC) between the output and input signals as the weighting factor. The proposed method has undergone experimental validation, confirming its effectiveness in Lamb wave inspection.

Microwave Imaging: Locating Bone Fractures using Patch Antenna of ISM Band.

The human skeletal system relies heavily on the integrity of bones, which provide structural support and safeguard vital organs. Accurate detection is paramount for effective diagnosis. Conventional methods for identifying fractures manually are not only time-consuming but also susceptible to errors. The proposed methodology hinges on a patch antenna operating at 2.4 GHz and a bone phantom housing a simulated fracture, where the antenna is scanned. The collected signals are then processed with Delay-and-Sum (DAS), and Delay-Multiply-and-Sum (DMAS) reconstruction algorithms. The resulting images offer visual insights into the location of fractures. Through experimentation, the efficacy of the images varies considerably in terms of their capacity for noise and artifact suppression. While DAS exhibits reasonable effectiveness, it suppresses noise and artifacts comprehensively. In contrast, DMAS offers clearer and more precise images of bone fractures. In summary, the research introduces a cost-effective and non-invasive strategy for detecting bone fractures. By involving a patch antenna at 2.4 GHz, along with image reconstruction algorithms like DMAS and DAS, one can effectively visualize the location of bone fractures. The experimental results highlight the superiority of DMAS over DAS in terms of contrast resolution, making it a highly promising avenue for fracture detection.

Ultrasound Computed Tomography Reflection Imaging with Coherence-Factor Beamforming for Breast Tumor Early Detection

Breast cancer is a global health concern, emphasizing the need for early detection. However, current mammography struggles to effectively image dense breasts. Breast ultrasound can be an adjunctive method, but it is highly dependent on operator skill. Ultrasound computed tomography (USCT) reflection imaging provides high-quality 3D images, but often uses delay-and-sum (DAS) beamforming, which limits its image quality. This article proposes the integration of coherence-factor (CF) beamforming into ultrasound computed tomography (USCT) reflection imaging to enhance image quality. CF assesses the focus quality of beamforming by analyzing the signal coherence across different channels, assigning higher weights to high-quality focus points and thereby improving overall image quality. Numerical simulations and phantom experiments using our built USCT prototype were conducted to optimize the imaging parameters and assess and compare the image quality of CF and DAS beamforming. Numerical simulations demonstrated that CF beamforming can significantly enhance image quality. Phantom experiments with our prototype revealed that CF beamforming significantly improves image resolution (from 0.35 mm to 0.14 mm) and increases contrast ratio (from 24.54 dB to 63.28 dB). The integration of CF beamforming into USCT reflection imaging represents a substantial improvement in image quality, offering promise for enhanced breast cancer detection and imaging capabilities.

FLEX: FLexible Transducer With External Tracking for Ultrasound Imaging With Patient-Specific Geometry Estimation.

Flexible array transducers can adapt to patient-specific geometries during real-time ultrasound (US) image-guided therapy monitoring. This makes the system radiation-free and less user-dependency. Precise estimation of the flexible transducer's geometry is crucial for the delay-and-sum (DAS) beamforming algorithm to reconstruct B-mode US images. The primary innovation of this research is to build a system named FLexible transducer with EXternal tracking (FLEX) to estimate the position of each element of the flexible transducer and reconstruct precise US images. FLEX utilizes customized optical markers and a tracker to monitor the probe's geometry, employing a polygon fitting algorithm to estimate the position and azimuth angle of each transducer element. Subsequently, the traditional DAS algorithm processes the delay estimation from the tracked element position, reconstructing US images from radio-frequency (RF) channel data. The proposed method underwent evaluation on phantoms and cadaveric specimens, demonstrating its clinical feasibility. Deviations in tracked probe geometry compared to ground truth were minimal, measuring 0.50 ± 0.29 mm for the CIRS phantom, 0.54 ± 0.35 mm for the deformable phantom, and 0.36 ± 0.24 mm on the cadaveric specimen. Reconstructing the US image using tracked probe geometry significantly outperformed the untracked geometry, as indicated by a Dice score of 95.1 ± 3.3% versus 62.3 ± 9.2% for the CIRS phantom. The proposed method achieved high accuracy (<0.5 mm error) in tracking the element position for various random curvatures applicable for clinical deployment. The evaluation results show that the radiation-free proposed method can effectively reconstruct US images and assist in monitoring image-guided therapy with minimal user dependency.

Grating lobe mitigation on large-pitch arrays using null subtraction imaging

Null Subtraction Imaging (NSI) is a novel beamforming technique that can produce B-mode images resulting in high spatial resolution and low computational cost compared to other beamforming techniques. Previous work has demonstrated that in addition to a beam pattern with a narrow main lobe and low side lobes, NSI can also reduce or mitigate grating lobes, which can appear when the array pitch is larger than one half the wavelength of the transmitted pulse. These grating lobes can result in imaging artifacts that produce clutter and lower contrast. By lowering grating lobe levels, a larger pitch array could be used, which could allow arrays with a larger field of view while maintaining a standard element count. This could have important benefits for specific applications such as ultrasonic abdominal imaging. Experiments were conducted to examine the feasibility of using NSI with large pitch, wide field-of-view arrays. Grating lobe reduction was measured against array pitch, DC offset, and f-number. Experiments were conducted on wire targets and contrast targets in a phantom and results were further verified in vivo by imaging the liver of a rabbit. The results demonstrated that NSI was able to reduce grating lobe brightness by up to 45 dB compared to delay-and-sum (DAS) beamforming when using planewave transmissions, reduce the generalized contrast-to-noise ratio (gCNR) of grating lobe regions from 0.60 to 0.08, and maintain a similar speckle quality to DAS. The gCNR of anechoic regions also improves, increasing from 0.09 to 0.15 on an array with a pitch of 5 wavelengths. Due to significant grating lobe level reduction, NSI shows potential to improve image quality over DAS on a large pitch, wide field-of-view array.