Degree Of Branching Research Articles

Effect of the Presence of Physiological Disorder Recognized as “yellow berry” on the Quality of Starch in Bread Wheat (Triticum aestivum) and Durum Wheat (Triticum durum)

AbstractGenetic and environmental factors influence wheat grain quality, including vitreousness, protein, and starch content. Yellow berry (YB), a physiological condition, adversely affects wheat quality, particularly in irrigated fields with limited nitrogen application, leading to starch‐rich, low‐protein grains. This study examines common wheat, used in baking industries, and durum wheat, primarily employs for pasta production. The focus is on investigating how the physicochemical properties of these wheat types change with the presence of YB, that impacts protein content negatively, increasing total starch content. Fourier‐transform infrared spectroscopy reveals structural changes in YB‐affected grains, while X‐ray diffraction indicates varying crystallinity. In determination of amylose, an increase of 6% in bread wheat with YB and 3% in durum wheat with YB is observed. In the case of RVA (Rapid Visco Analyzer) analysis, a notable increase in viscosity is evident in the treatments that included the yellow berry. This finding suggests that YB is associated with substantial modifications in starch properties, such as amylose‐to‐amylopectin ratio, chain length, and degree of branching, among several other components, which may have important implications for the texture and quality of food products. This study calls for further research to mitigate YB's impact and enhances the quality of wheat‐derived foods.

Arbor vitae cerebelli: Fractal properties and their quantitative assessment by novel “contour scaling” fractal analysis method (an anatomical study)

BackgroundArbor vitae cerebelli (tree-like branching white matter of the cerebellum) has a complex spatial configuration that is challenging to assess using conventional morphometric methods. This study proposes a fractal approach to describe and quantify the anatomy of Arbor vitae cerebelli. For this purpose, a new “contour scaling” method for fractal analysis of cerebellar white matter was developed. Material and methodsThe cerebella of 100 cadavers (50 male and 50 female) who died from causes unrelated to brain pathology, aged 20–95 years, were examined. Mid-sagittal sections of the cerebellar vermis were studied. The fractal dimension values of the cerebellar white matter were determined using both the developed fractal analysis method and the conventional “box counting” method, along with measurements of non-fractal parameters including cerebellar weight, area and perimeter of the vermis cross-section, perimeter-to-area ratio, and circularity. ResultsConsidering the cerebellar white matter as a tree-like fractal, it was found to have 7 or 8 primary branches, which subdivide into 10-18 second-iteration branches, 19–38 third-iteration branches, and 34–53 fourth-iteration branches. Females more often had 8 primary branches compared to males, while males had a greater number of branches in the second to fourth iterations. The mean fractal (Hausdorff) dimension was 1.697 (1.721 in males, 1.674 in females, P = 0.01). The fractal dimension correlated most strongly with the perimeter and area of the vermis cross-section and had no significant relationship with age. ConclusionThe fractal (Hausdorff) dimension, determined using the novel “contour scaling” method, quantitatively assesses the degree of branching of the cerebellar white matter. An increase in the absolute size of the cerebellum leads to a higher degree of branching of its white matter and an increase in the number of its constitutive components – white matter branches and folia.

Identification and Evaluation of Vulnerable Links in a Distribution Network with Renewable Energy Source Based on Minimum Discriminant Information

With the increase in the proportion of photovoltaic and wind power access, the scale and form of distribution networks are becoming more and more complex. The traditional single distribution network vulnerability assessment method is difficult to use to identify the vulnerable links in the distribution network. Therefore, this paper proposes a method for identifying and evaluating vulnerable links in distribution networks based on minimum discriminant information. First, considering the influence of distributed grid connection, an improved probabilistic power flow calculation method is proposed, which improves the calculation efficiency and accuracy. Second, considering the correlation degree, transmission capacity, and voltage stability of branches in the distribution network, the identification index of vulnerable lines is defined. Based on power quality and operating state, the identification index of vulnerable nodes in a distribution network is defined. Finally, based on the indicators of vulnerable nodes and vulnerable lines, the vulnerable links in the distribution network are comprehensively evaluated based on the principle of minimum discriminant information, and the vulnerable links of the entire distribution network are evaluated according to different degrees of vulnerability. The rationality and effectiveness of the proposed method are verified via an example analysis of actual power grid data.

Assessment of the contamination degree of gas pipeline branches during mined-out space degasification

Assessment of the contamination degree of gas pipeline branches during mined-out space degasification

Influence of ultrasonic pretreatment on the quality attributes and pectin structure of chili peppers (Capsicum spp.)

Chili peppers (Capsicum spp.) exhibit a diverse range of quality characteristics and pectin structures, which are influenced by various factors. This study aimed to investigate the effects of ultrasound (US), ultrasonic combined hot blanching (US-BL), and ultrasonic combined freezing and thawing (US-FT) on the quality characteristics and pectin structure of vacuum pulsation-dried (VP) chili peppers. The results indicated that US-BL samples exhibited the highest L* and a* values, retained maximum capsorubin, and showed an increase in vitamin C, total phenols, and rehydration by 14.28 %, 40.87 %, and 8.66 %, respectively. In contrast, the US-FT samples exhibited the highest capsaicin and dihydrocapsaicin content, which increased by 54.97 % and 64.04 %, respectively. Pretreatment resulted in higher pectin linearity, a lower degree of branching, and a reduced molecular weight in the US-BL sample. Atomic force microscopy confirmed the degrading effect of pretreatment on the pectin structure. Pearson’s correlation analysis revealed that capsorubin, capsaicin analogs, vitamin C, and total phenols were highly correlated with pectin linearity and molecular weight. This study found that US-BL was the most effective pretreatment method for improving the quality of pulsatile chili peppers and provides theoretical support for the application of VP chili peppers.

Enhancing cassava beer quality: Extrusion-induced modification of cassava starch structure boosts fermentable sugar content in wort

The high starch content and cost-effectiveness of cassava make it an attractive adjunct in beer brewing, with the fine structure of starch playing a crucial role in determining the composition of fermentable sugars (FS) and overall beer quality. This study investigated the effect of extrusion-induced changes in the starch structure of cassava flour on the FS profile of the wort and, consequently, on the quality attributes of cassava beer. The findings revealed that the shear stress during extrusion significantly reduced the molecular weight to 1.20 × 105g/mol and the branching degree of amylopectin. Simultaneously, there was an increase in the concentrations of short- and intermediate- chain amylose by 5.61% and 42.72%, respectively. These structural changes enhanced the enzymatic hydrolysis of extruded cassava flour (ECF), resulting in a higher total fermentable sugars content (22.00g/100 mL) in the ECF wort, predominantly composed of maltose and glucose. Furthermore, the altered FS profile led to an increased production of higher alcohols and esters in extruded cassava beer (ECB), particularly noted for the elevation of 2-phenylethyl alcohol levels, which imparted a distinctive rose aroma to the ECB. Consequently, the sensory profile of ECB showed significant improvement. This study offers critical insight into optimizing cassava beer quality and broadens the potential applications of cassava flour in the brewing industry.

Hyperbranched Polymeric 19F MRI Contrast Agents with Long T2 Relaxation Time Based on β-Cyclodextrin and Phosphorycholine.

19F magnetic resonance imaging (19F MRI) is gaining attention as an emerging diagnostic technology. Effective 19F MRI contrast agents (CAs) for in vivo applications require a long transverse (or spin-spin) relaxation time (T2), short longitudinal (or spin-lattice) relaxation time (T1), high fluorine content, and excellent biocompatibility. Here, we present a novel hyperbranched polymeric 19F MRI CA based on β-cyclodextrin and phosphorylcholine. The influence of the branching degree and fluorine content on T2 was thoroughly investigated. Results demonstrated a maximum fluorine content of 11.85% and a T2 of 612 ms. This hyperbranched polymeric 19F MRI CA exhibited both great biocompatibility against cells and organs of mice and high-performance imaging capabilities both in vitro and in vivo. The research provides positive insights into the synthesis strategies, topological design, and selection of fluorine tags for 19F MRI CAs.

Development of a comprehensive normal-phase liquid chromatography × size-exclusion chromatography platform with ultraviolet spectroscopy and high-resolution mass spectrometry detection for the chemical characterization of complex polyesters

BackgroundPolyesters are applied in high-end products in many industrial applications, including resins and powder-coating applications. The characterization of the chemical heterogeneities within a polyester is of utmost interest to develop new products or improve existing applications. Unfortunately, characterization is a difficult task, as polyesters may feature distributions in end-group functionality, molecular weight, chemical composition, and degree of branching. Currently, no analytical method can characterize all these interdependent distributions in a single analysis. ResultsWe report the use of comprehensive normal-phase liquid chromatography × size-exclusion chromatography hyphenated with ultraviolet-light spectroscopy and high-resolution mass spectrometry in parallel (NPLC × SEC–UV/HRMS) to characterize polyesters according to their end-group-functionality and molecular-weight distributions. The chemical composition can be measured with HRMS, while relative quantitation can be performed with UV detection. A supercharging agent was used during ionization allowing to extend the molecular-weight range of the detected chemical species. SignificanceThe presented platform allows characterization of polyesters with varying fractions of carboxyl or hydroxyl end-group functionalities and varying distributions of molecular weight, degree of branching, and chemical compositions. The number-average and weight-average molar masses are obtained in the same analysis. This information cannot be obtained by any one-dimensional technique. The developed NPLC × SEC–UV/HRMS platform is a valuable tool for characterizing polyesters in an industrial setting.

Dynamic optical coherence tomography for imaging acute wound healing.

The aim of this study was to investigate acute wound healing with dynamic optical coherence tomography (D-OCT). From 22 patients with 23 split skin graft donor sites, vessels at four wound edges, the wound bed, and adjacent and unaffected skin of the contralateral leg were measured by D-OCT at six time points from surgery to 4 weeks of healing. Changes in vessel orientation, density, diameter, morphology and pattern in horizontal, vertical and 3D images were analysed for wound healing and re-epithelialization. At 300 μm depth, there were significant differences of blobs and serpiginous vessels between normal and wounded skin. The wound had significantly more vertically oriented vessels, a higher degree of branching, vessel density and diameter compared with healthy skin. 3D images showed increased angiogenesis from healthy skin towards the wound centre, significantly higher vessel density at the wound than at normal skin and the highest at the interface. During wound healing blobs, coils and serpiginous vessels occurred significantly more frequently in lesional than healthy skin. Vessel density was greatest at the beginning, decreased and then increased by 4 weeks post-surgery. D-OCT helps to evaluate acute wound healing by visualizing and quantifying blood vessel growth in addition to re-epithelialization.

Aqueous RAFT Dispersion Polymerization Mediated by an ω,ω-Macromolecular Chain Transfer Monomer: An Efficient Approach for Amphiphilic Branched Block Copolymers and the Assemblies.

Herein, an ω,ω-macromolecular chain transfer monomer (macro-CTM) containing a RAFT (reversible addition-fragmentation chain transfer) group and a methacryloyl group was synthesized and used to mediate photoinitiated RAFT dispersion polymerization of hydroxypropyl methacrylate (HPMA) in water. The macro-CTM undergoes a self-condensing vinyl polymerization (SCVP) mechanism under RAFT dispersion polymerization conditions, leading to the formation of amphiphilic branched block copolymers and the assemblies. Compared with RAFT solution polymerization, it was found that the SCVP process was promoted under RAFT dispersion polymerization conditions. Morphologies of branched block copolymer assemblies could be controlled by varying the monomer concentration and the [HPMA]/[macro-CTM] ratio. The branched block copolymer vesicles could be used as seeds for seeded RAFT emulsion polymerization, and framboidal vesicles were successfully obtained. Finally, degrees of branching of branched block copolymers could be further controlled by using a binary mixture of the macro-CTM and a linear macro-RAFT agent or a small molecule CTM. We believe that this study not only provides a versatile strategy for the preparation of branched block copolymer assemblies but also offers important insights into polymer synthesis via heterogeneous RAFT polymerization.

Effect of branching degree of quaternized poly(p-terphenyl isatin) on the performance of anion exchange membrane water electrolyzers

Anion exchange membrane (AEM) is a vital component of an anion exchange membrane water electrolyser (AEMWE). Herein, we reported a series of quaternized poly(p-terphenyl isatin) (Q-PPI-bx) AEMs with the branching architecture and microporous structure by incorporating bulky rigid 1,3,5-triphenyl monomer through a superacid polycondensation reaction. It was found that the introduction of branching and microporous structures provided the membranes with a larger free volume and distinct microphase separation morphology, thus resulting in a higher OH− ionic conductivity (158.7 mS cm−1 at 80 °C). At the same time, the AEMs exhibited good mechanical properties and good alkaline stability (retention of 85 % for 1500 h in 1 M KOH at 80 °C). In addition, the current density of Q-PPI-b10 AEM was 1.14 A cm−2 at 2 V in AEMWE. During the in-situ endurance experiment at current density of 0.2 A cm−2, the voltage remained stable for 170 h. These findings underscore the potential of novel branched AEMs for application in AEMWE systems with enhanced performance and durability, thus contributing to the advancement of efficient and sustainable water electrolysis technology.

Hydrolysis and cross-flow ultrafiltration as an alternative process to isolate fucoidans from edible seaweed Nizamuddinia zarnardinii with enhanced immunostimulatory efficacy

In the present investigation, fucoidan isolated from Nizamuddinia zanardinii was hydrolysed using 0.01 N HCl at boiling temperature for 10, 20, 40 and 60 min. Native and hydrolysed fucoidans contained a close chemical compositions, most importantly constituted of sulfates and uronic acids as well as fucose, galactose and mannose. Hydrolysis and cross-flow ultrafiltration produced fucoidan hydrolysates having different weight average molecular weights. The FH20 fucoidan was the most potent polysaccharide hydrolysate to stimulate NO-release from RAW264.7 macrophage cells. After cross-flow ultrafiltration of FH20, 100 < kDa fucoidan, polysaccharide with high branching degree consisting mainly of (1 → 2)-Fucp, (1 → 2,3)-Fucp, (1 → 3)-Galp, (1 → 2,3)-Galp, (1 → 2)-Manp and (1 → 3)-Manp residues, exerted the highest stimulation effect on RAW264.7 macrophage cells, secreting considerable NO, TNF-α, IL-1β, IL-6 and IL-12 proinflammatory mediators. Also, 100 < kDa fucoidan activated NK-92 cells to release TNF-α, INF-γ, granzyme-B, perforin, NKG2D and FasL. Both RAW264.7 and NK-92 cells were activated through NF-κB and MAPKs signalling pathways and the degree of stimulation capacity in fucoidan from N. zanardinii was in close correlation with the molecular weight.

Polyurea-urethane Temperature-responsive Hydrogels for Sustained Delivery of Anti-VEGF Therapeutics.

Temperature-responsive hydrogels, or thermogels, have emerged as a leading platform for sustained delivery of both small molecule drugs and macromolecular biologic therapeutics. Although thermogel properties can be modulated by varying the polymer's hydrophilic-hydrophobic balance, molecular weight and degree of branching, varying the supramolecular donor-acceptor interactions on the polymer remains surprisingly overlooked. Herein, to study the influence of enhanced hydrogen bonding on thermogelation, we synthesized a family of amphiphilic polymers containing urea and urethane linkages using quinuclidine as an organocatalyst. Our findings showed that the presence of strongly hydrogen bonding urea linkages significantly enhanced polymer hydration in water, in turn affecting hierarchical polymer self-assembly and macroscopic gel properties such as sol-gel phase transition temperature and gel stiffness. Additionally, analysis of the sustained release profiles of Aflibercept, an FDA-approved protein biologic for anti-angiogenic treatment, showed that urea bonds on the thermogel were able to significantly alter the drug release mechanism and kinetics compared to usage of polyurethane gels of similar composition and molecular weight. Our findings demonstrate the unrealized possibility of modulating gel properties and outcomes of sustained drug delivery through judicious variation of hydrogen bonding motifs on the polymer structure.

Tailoring Highly Branched Poly(β-amino ester)s for Efficient and Organ-Selective mRNA Delivery.

Development of mRNA therapeutics necessitates targeted delivery technology, while the clinically advanced lipid nanoparticles face difficulty for extrahepatic delivery. Herein, we design highly branched poly(β-amino ester)s (HPAEs) for efficacious organ-selective mRNA delivery through tailoring their chemical compositions and topological structures. Using an "A2+B3+C2" Michael addition platform, a combinatorial library of 219 HPAEs with varied backbone structures, terminal groups, and branching degrees are synthesized. The branched topological structures of HPAEs provide enhanced serum resistance and significantly higher mRNA expression in vivo. The terminal amine structures of HPAEs determine the organ-selectivity of mRNA delivery following systemic administration: morpholine facilitates liver targeting, ethylenediamine favors spleen delivery, while methylpentane enables mRNA delivery to the liver, spleen, and lungs simultaneously. This study represents a comprehensive exploration of the structure-activity relationship governing both the efficiency and organ-selectivity of mRNA delivery by HPAEs, suggesting promising candidates for treating various organ-related diseases.

Engineering the Blackbody Absorption of the Au-Branch-on-Au-Plate Heterostructures.

Utilizing the strong ligand control effects of l-cysteine (l-Cys), the growth of Au on Au triangular nanoplate (AuTN) seeds was continuously tuned from layer-by-layer (the Frank-van der Merwe) to layer-plus-island (the Stranski-Krastanov), and island (the Volmer-Weber) growth modes, leading to the formation of a series of Au-on-AuTN heterostructures. Within the window of VW growth mode (featured by the growth of Au spikes and branches on AuTNs), the effective localized surface plasmon resonance (LSPR) coupling led to the selective strengthening of the "valley" absorptions, leading to smooth and flat absorption curves. Interestingly, through engineering the number/density, size, and branching degree of the Au branches, except for the black color, full spectrum absorption within 400-1300 nm wavelength was achieved on Au-branch-on-AuTN structures. Mechanistic studies revealed that the blackbody absorption property of the Au-branch-on-AuTN originates from the well-balanced intraparticle LSPR couplings among the neighboring Au branches. The tunable blackness and the full spectrum absorption property made the Au-branch-on-AuTN heterostructure a suitable candidate for various plasmonic-related applications, such as a wide spectrum light absorber, photoacoustic imaging contrast agent, and photothermal therapy medium. In addition, our strong ligand control in Au-branch-on-AuTN heterostructures could be extended to other hybrid systems with diverse material combinations, so long as to find the proper strong ligand.

Synthesis, Structural Analysis, and Peroxidase-Mimicking Activity of AuPt Branched Nanoparticles.

Bimetallic nanomaterials have generated significant interest across diverse scientific disciplines, due to their unique and tunable properties arising from the synergistic combination of two distinct metallic elements. This study presents a novel approach for synthesizing branched gold-platinum nanoparticles by utilizing poly(allylamine hydrochloride) (PAH)-stabilized branched gold nanoparticles, with a localized surface plasmon resonance (LSPR) response of around 1000 nm, as a template for platinum deposition. This approach allows precise control over nanoparticle size, the LSPR band, and the branching degree at an ambient temperature, without the need for high temperatures or organic solvents. The resulting AuPt branched nanoparticles not only demonstrate optical activity but also enhanced catalytic properties. To evaluate their catalytic potential, we compared the enzymatic capabilities of gold and gold-platinum nanoparticles by examining their peroxidase-like activity in the oxidation of 3,3',5,5'-tetramethylbenzidine (TMB). Our findings revealed that the incorporation of platinum onto the gold surface substantially enhanced the catalytic efficiency, highlighting the potential of these bimetallic nanoparticles in catalytic applications.

P-154 Structural changes of the human sperm tail during the early post-fertilization

Abstract Study question What happens to the sperm tails that are no longer needed after the goal of fertilization has been achieved? Summary answer The sperm tail lost its fibrous sheath and changed to a coiled morphology with a whisker root-like structure at the tip during the early post-fertilization. What is known already The sperm tail has been thought to play only a role in allowing the head and neck to reach the oocyte. The flagellum is found in the mammalian sperm tail and consists of a middle, main, and terminal part. It also contains an axon composed of two central microtubules surrounded by nine peripheral microtubule doublets (9d + 2s microtubule pattern) surrounded by an accessory structure called the fibrous sheath (FS), but few studies have been conducted on the post-fertilization fate of the mammalian sperm tail. Study design, size, duration To investigate sperm tail structure from the pronuclear stage to the second cleavage, we used abnormally fertilized oocytes derived from either conventional in vitro fertilization (cIVF, n = 41) or intracytoplasmic sperm injection (ICSI, n = 11). In this study, abnormally fertilized oocytes were collected between March 2022 and November 2023 and subjected to immunofluorescence analysis and field emission scanning electron microscopy (FE-SEM) analysis. Participants/materials, setting, methods Under ethical approval, abnormally fertilized oocytes were donated by infertile couples undergoing cIVF or ICSI cycles at the Yamashita Shonan Yume Clinic in Japan. Informed consent was obtained from all participants. Immunofluorescence assay was performed to analyze sperm tail morphology using antibodies against H3K27me3, α-tubulin, and AKAP4. FE-SEM analysis was performed to detect the 9d + 2s structure characteristic of the sperm tail axon. Main results and the role of chance Tri-pronuclear zygotes derived from conventional in vitro fertilization (cIVF-derived 3PN) had two male pronuclei, whereas those derived from intracytoplasmic sperm injection (ICSI-derived 3PN) had one. Each zygote had the same number of coiled microtubule structures as the male pronucleus, and the 9d + 2s structure characteristic of the axon was identified, suggesting a sperm tail. No difference in sperm tail shape was observed between ICSI-derived 3PN and cIVF-derived 3PN. AKAP4, which is specifically localized in the FS associated with the principal piece of the flagellum, was observed in sperm tails attached to the zona pellucida but not in those in the oocyte, suggesting that the FS of the flagellum is lost before the pronuclear stage, leaving the microtubules of the axonemes exposed. The sperm tail was attached to one of the spindle poles during the first cleavage of abnormally fertilized oocytes, but no differences in the structure of the spindle pole with or without the sperm tail were observed. The tip of the sperm tail was branched like a “whisker root”, suggesting that the sperm tail was degraded from the end, but the degree of tip branching did not differ from the pronuclear stage to the second cleavage. Limitations, reasons for caution Normal fertilized oocytes were not used in this study because they are used for clinical treatment. The cell biological significance of sperm tail branching is currently unknown and requires further experimentation. Wider implications of the findings These findings shed light on the processes that occur during human fertilization, suggest new roles for the sperm tail, and may have implications for assisted fertilization approaches in the future. Trial registration number not applicable

Structural characterization and in vitro digestibility of rice starch processed with the combination of ultra‐high pressure homogenization, debranching, and temperature‐cycled crystallization

AbstractThis study examined the structural characterization and in vitro digestibility of rice starch processed with the combination of ultra‐high pressure homogenization (UHPH), debranching, and temperature‐cycled crystallization under various pressures (0–160 MPa). After UHPH treatment, the degree of branching (DB) of processed starches (0.65%–2.03%) was lower than that of the native rice starch (NS, 2.96%). Assessment of chain length distribution suggested that the considerable amylose was produced after treatments. Processed starches exhibited an irregular fragmented structure, and the crystalline structure was transformed from A‐type (native rice starch) into B + V‐type (processed starches). Moreover, the relative crystallinity (RC) and the absorbance ratio of 1047/1022 cm−1 (R1047/1022) of processed starches decreased from NS (RC, 22.99%; R1047/1022, 0.79) to 13.47%–18.21% (RC) and 0.51–0.78 (R1047/1022), respectively. Iodine binding curves revealed that processed starches possessed the higher degree of polymerization (DP). Furthermore, the contents of slowly digestible starch (SDS) and resistant starch (RS) increased in all processed starches, and the RS content of starch treated under 160 MPa (35.33%) was notably greater than that of native starch (9.37%). These results suggested that the UHPH can be used as a pretreatment strategy to reduce the digestibility of starch products.Practical applicationsUHPH pretreatment disrupts starch molecular chains to produce the large amounts of short linear amylose. Debranching followed by temperature‐cycled crystallization can increase the content of resistant starch (RS), yielding a raw material suitable for boosting the health of the digestive system and overall health. Therefore, UHPH pretreatment has a high application value in the field of starch modification.

The galactomannan-EGCG physical complex: Effect of branching degree and molecular weight on structural and physiological properties

Polysaccharides and polyphenols are bioactive components that co-exist in many plant foods. Their binary interaction in terms of the structure-function relationships, however, has not been well clarified. This study elucidated the correlation between the structural and physiological properties of galactomannan (GM) -catechin monomer complexes and GM with different branching or molecular weight (Mw). Results indicated that locus bean gum with lower branching degree (Gal/Man is 0.259) bound more readily to EGCG with adsorption rate of 19.42 %. EGCG and ECG containing galloyl groups were more inclined to form hydrogen bonds with GMs, significantly improving the adsorption by GMs. The introduction of EGCG could enhance the antioxidant activity and starch digestion inhibition of GM, which positively correlated with the adsorption capacity of EGCG. The guar gum (GG) with higher Mw (7384.3 kDa) could transport 71.51 % EGCG into the colon, while the retention rate of EGCG reaching the colon alone was only 46.33 %. Conversely, GM-EGCG complex with lower Mw (6.9 kDa) could be readily utilized by gut microbiota, and increased production of short-chain fatty acids (SCFAs). This study elucidated the structure-properties relationship of GM-EGCG complexes, and provide a new idea for the development and precision nutrition of polysaccharides-polyphenol complexes fortified functional foods.

Branching in poly(amine-co-ester) polyplexes impacts mRNA transfection

Branching is a key structural parameter of polymers, which can have profound impacts on physicochemical properties. It has been demonstrated that branching is a modulating factor for mRNA delivery and transfection using delivery vehicles built from cationic polymers, but the influence of polymer branching on mRNA delivery remains relatively underexplored compared to other polymer features such as monomer composition, hydrophobicity, pKa, or the type of terminal group. In this study, we examined the impact of branching on the physicochemical properties of poly(amine-co-esters) (PACE) and their efficiency in mRNA transfection in vivo and in vitro under various conditions. PACE polymers were synthesized with various degrees of branching ranging from 0 to 0.66, and their transfection efficiency was systemically evaluated. We observed that branching improves the stability of polyplexes but reduces the pH buffering capacity. Therefore, the degree of branching (DB) must be optimized in a delivery route specific manner due to differences in challenges faced by polyplexes in different physiological compartments. Through a systematic analysis of physicochemical properties and mRNA transfection in vivo and in vitro, this study highlights the influence of polymer branching on nucleic acid delivery.