Degree Of Substitution Research Articles

Sulfur-containing cellulose esters for selectively anchoring gold for water catalytic decontamination

The facile preparation of sustainable sulfur-containing polymer functional materials has been obtained great attention due to their chemical reactivity and metal complexing ability. In this study, taking the solution properties advantages of the newly developed cellulose solvent system of DBU/DMSO/CO2, thiol and disulfide bond functionalized cellulose ester (TDSCE) was facilely prepared via in-situ tandem transesterification and oxidation reaction by using methyl 3-mercaptopropionate, without adding any external catalyst. The synthetic protocol was featured by that the DBU not only acted as reagent for the dissolution of cellulose, but also catalysts for the transesterification of cellulose with methyl 3-mercaptopropionate to yield cellulose 3-mercaptopropionate (Cell-MP) with maximum degrees of substitution (DS) of 0.77, and an oxidant for the partial oxidation of Cell-MP to produce a cellulose methyl 3,3′-disulfanediyldipropionate (Cell-MDSP) with maximum DS of 0.36 mixed ester, respectively. With successful introduction of thiol and disulfide bond into the cellulose backbone, the TDSCEs indicated desirable selective absorption of Au3+ from mimic heavy mental ions waste water due to the sulfur-Au chemistry with maximal adsorption capacity for Au3+ of 415.2 mg/g. The subsequent reduction of Au3+ into gold nanoparticles (Au NPs) fabricated a robust TDSCE-2@Au NPs composite catalyst with high catalytic activity for the hydrogenation treatment of water pollutes, such as 4-nitrophenol (4-NP)and azo dyes.

Unveiling the synergistic effect of octenyl succinic anhydride and pulsed electric field on starch nanoparticles

In this study, guinea starch nanoparticles (GSNP) were prepared by nanoprecipitation technique and modified with octenyl succinic anhydride (3 %) and pulsed electric field (1.5, 3.0, and 4.5 kV/cm). The effect of dual modification on the physicochemical, structural, morphological, thermo-pasting, and rheological properties of GSNP was investigated. The dual modification successfully incorporated octenyl groups into GSNP, as confirmed by 1H nuclear magnetic resonance spectroscopy and Fourier transform infrared spectroscopy. The degree of substitution increased from 0.0254 to 0.0347, with particle size ranging from 241.30 to 292.50 nm and zeta potential of −23.11 to −29.98 mV. TEM micrographs revealed that all SNP samples had self-aggregated granules with a mean size below 120 nm, and XRD confirmed a V-type crystalline structure. The amylose content and water absorption capacity decreased from 34.02 % to 24.63 % and from 2.45 to 1.91 g/g, respectively, while the oil absorption capacity and relative crystallinity increased from 3.42 to 4.01 g/g and from 17.82 % to 34.76 %, with modification. The gelatinization and degradation temperature of modified samples were higher while pasting properties exhibited variation with modification. The rheological properties of modified SNP samples exhibited more pronounced shear thinning, attributed to their weaker gel structure and fluid-like gel network. Overall, results suggested that modified GSNPs have potential for stabilizing Pickering emulsion and delivery of carrier materials for active functional substances.

Synthesis and characterization of methacryl glycol chitosan as a novel functionally advanced thermogel for biomedical applications

Thermo-responsive hydrogels (thermogels), known for their sol-gel transition capabilities, have garnered significant interest for biomedical applications over recent decades. However, conventional thermogels are hindered by intrinsic physicochemical and functional limitations that impede their broader utility. This study introduces methacryl glycol chitosan (MGC) as a novel thermogel, offering enhanced functionality and addressing these limitations. MGCs, synthesized through N-methacrylation of glycol chitosan, exhibit tunable thermogelling and photo-crosslinking behaviors. The thermo-reversible sol-gel transition of MGCs occurs within a 21–54 °C range, adjustable by polymer concentration and methacryl substitution degree. Photo-crosslinking using UV light further enhances the mechanical properties of MGC thermogels, creating thermo-irreversible, chemically crosslinked hydrogels. MGCs show no cytotoxic effects and effectively support cell encapsulation. In vivo studies demonstrate stable crosslinking with minimal UV-induced skin damage. Due to their unique thermo-sensitivity, multi-functionality, and customizable properties, MGC thermogels are promising novel biomaterials for various biomedical applications, particularly injectable tissue engineering and cell encapsulation, thus overcoming the limitations of conventional thermogels.

Effect of NaCl replacement by other salt mixtures on myofibrillar proteins: Underlining protein structure, gel formation, and chewing properties.

The protein structure, gel changes, and chewing properties of low-sodium myofibrillar protein (MP) prepared by compound chloride salts (KCl/MgCl2, KCl/CaCl2, and KCl/MgCl2/CaCl2) and different substitution degrees (10%, 25%, and 40%) at same ionic strength (0.6M) were investigated. The results revealed that the low-sodium MP gels containing CaCl2 manifested more liquid loss and less moisture content accompanied by obvious morphological shrinkage, while KCl/MgCl2 contributed to the gel juiciness. At high substitution degree of 40%, KCl/CaCl2 substitution rendered the gel with dense structure and highest strength, but worse water retention capacity. Using other compound chloride salts influenced the chewing efficiency, and CaCl2 substitution made the gel relatively hard to chew. The inhomogeneous structure accompanied by cluster blocks in KCl/CaCl2-substituted MP gel accelerated the overall fracture rate. During heating process, more proteins in CaCl2-substituted MP did not participate in gel formation, intervening the final gel properties. The chloride salt mixtures containing MgCl2, rather than CaCl2, avoided or alleviated the liquid loss and shrinkage of low-sodium MP gel within the substitution degree of 10%-40%, and substitution degree not exceeding 25% was more reasonable for the controlled qualities.

Effects of Acetylation on the Morphological, Physicochemical, and Thermal Properties of Enterolobium cyclocarpum Starch

AbstractThis study investigates the impact of acetylation treatment on Enterolobium cyclocarpum (Parota) starch, focusing Morphological, Physico‐chemical and thermal impact induced by varying acetylation levels. The research employed scanning electron microscopy (SEM), differential scanning calorimetry (DSC), and thermogravimetric analysis (TGA) to examine the structural and thermal alterations resulting from acetylation. These analyses also evaluated the starch's thermal stability. Through titration, the degree of substitution and acetyl group content were quantified, demonstrating significant morphological transformations in the starch, such as increased particle size and the appearance of surface cracks on the granules. The study revealed that the degree of substitution, which changes with the duration of acetylation, markedly influences the starch's physicochemical properties, including hydrophobicity and thermal stability. Initially, acetylation reduced the gelatinization temperature, suggesting a decrease in the energy required for gelatinization. Over longer acetylation periods, however, the gelatinization temperature increased, likely due to enhanced crystallinity or molecular reorganization. These findings indicate that acetylated Parota starch has potential applications in the food industry as an encapsulating agent and in the thermoplastics industry as a plasticizer, dependent on the level of acetylation. This research underscores the utility of specific chemical modifications to adapt starch properties for various industrial applications.

Assessment of the influence of glycol and alcohol on the morphology and protective properties of iron carbonate in carbon dioxide corrosion of gas pipelines

The potential effect of hydrate formation inhibitors (glycols, alcohols) — components of the liquid phase of gas pipeline operating media — on carbon dioxide corrosion during the transport of aggressive gas has not been sufficiently studied. The paper presents the results of a study of the corrosive effect of glycol (alcohol) present in the liquid phase on the composition and properties of corrosion products on steel when modeling the main aggressive factors under conditions of transport of CO2-containing gas. On a corrosion stand, the aggressive conditions of alternating wetting of gas pipeline walls with water were reproduced. The fluid circulation characteristic of a partially filled pipeline can have an effect on preventing the formation or destruction of films of corrosion products (iron carbonate, siderite) on the steel surface. In places of cracking and peeling of siderite formed in the presence of CO2, conditions will be created for the formation of general and local corrosion damage. During simulation tests, monoethylene glycol and isopropanol, as well as their aqueous solutions of different concentrations, were used. For the first time, data on the formation and composition of non-stoichiometric siderite in water-glycol and water-alcohol media at CO2 partial pressures and temperature were obtained. By processing diffraction patterns obtained by X-ray diffraction, the degree of substitution of iron ions in non-stoichiometric siderites by other cations was determined. The dependence of the degree of substitution on the concentration of alcohol (glycol) in their aqueous solutions was analyzed. It was revealed that with an increase in glycol concentration, a decrease in the rate of local corrosion is observed. With a high glycol content, internal corrosion is completely suppressed in the presence of CO2. It has been established that in aqueous-alcoholic media at elevated temperatures, local carbon dioxide corrosion does not occur. This is apparently due to the uneven distribution of water and alcohol in the mixture. The results obtained can be used in assessing internal carbon dioxide corrosion in the presence of glycol (alcohol), used at gas facilities as an inhibitor of hydrate formation.

Effect of NaCl partial replacement by KCl, Ca-ascorbate, and spent hen meat hydrolysate on the physicochemical properties and quality of Cantonese sausage.

A large amount of NaCl is usually used to provide a unique flavor and extend the shelf life of meat products. However, excessive sodium intake may cause diseases such as cardiovascular diseases. Spent hen meat hydrolysate (SHH) as an efficient NaCl substitute was developed with inefficient research related to SHH application in food systems. Therefore, the effects of NaCl replacement with SHH, KCl, and Ca-ascorbate on the quality of low-sodium Cantonese sausage were investigated. Four groups of salt formulation, I (100% NaCl), II (NaCl/KCl/Ca-ascorbate=60%/30%/10%), III (NaCl/KCl/Ca-ascorbate/SHH=50%/30%/10%/10%), and IV (NaCl/KCl/Ca-ascorbate/SHH=30%/30%/10%/30%), were used to produce Cantonese sausages. The moisture and nitrite content decreased, the microbiological growth was inhibited, and the protein content increased after adding SHH for Cantonese sausages with NaCl substitution degrees of 50% and 70%. The saltiness, overall flavor, color, and texture of low-sodium Cantonese sausages with SHH were maintained or improved compared to the Cantonese sausage without sodium replacement. The proportion of peptides with molecular weight<1kDa in Cantonese sausages increased after adding SHH, which may improve the overall flavor by interacting with peptides or other compounds. SHH combined with KCl and Ca-ascorbate is an efficient NaCl substitute, which can maintain and even improve Cantonese sausage quality and reduce sodium content up to 70%. These findings offer a promising reference for SHH application in the food industry and promote the development of salt taste-enhancing hydrolysate in food science.

Effect of catalyst and oxidant concentrations in a TEMPO oxidation system on the production of cellulose nanofibers.

In traditional TEMPO oxidation systems, the high cost of TEMPO catalysts has been a significant barrier to the industrialization of oxidized CNF. From an economic perspective, presenting the characteristics of various CNFs produced with the oxidation systems with reduced catalyst usage could facilitate the industrial application of CNF across a wide range of fields. In this study, it was demonstrated that reducing the amount of TEMPO catalyst used (from 0.1 to 0.05 mmol g-1) in a conventional oxidation system increased the carboxylate content by approximately 6.3%. Furthermore, the activation of hydroxyl amine TEMPO, which is generated after the oxidation reaction of cellulose, was enhanced by adjusting the dosage of the inexpensive oxidant NaClO, leading to a 20% improvement in carboxylate content. This suggests that controlling the amount of NaClO as an oxidant can be a key parameter in adjusting the dosage of TEMPO to achieve the targeted degree of surface substitution. Results from the dispersion stability, UV-transmittance, and morphological properties of TEMPO-oxidized CNF using microfluidizing treatment showed that high carboxylate content plays a crucial role in producing high-purity CNF suspensions, which are small, uniform, and free from microfibers. Additionally, by varying the number of mechanical treatments applied to the oxidized cellulose, various types of CNF suspensions with different mean widths were obtained. We expect that these findings offer meaningful insights to end-users seeking a breakthrough in the performance limitations of final applications using cellulose nanomaterials.

Study on Surface Esterification of Cellulose Nanocrystals Their and Lipid-Lowering Effect

ABSTRACT With the rapid development of the economy and changes in dietary structure, there is an excessive intake of high sugar and high-fat foods. To address this issue, in this study, we grafted palmitic acid onto CNC in the form of ester groups and evaluated its adsorption performance. Research had found that among these three methods, the CDI catalytic method can successfully obtain esterification modified CNC while also taking into account its environmentally friendly and pollution-free characteristics. Compared with CNC, its adsorption capacity for oil had increased, with the maximum adsorption capacity increasing from 35.80 g/g to 46.91 g/g. Meanwhile, the degree of esterification substitution of esterification modified CNC was measured, and the result was 0.03. Especially, after adding CNC-PA, the hydrolysis of fat was significantly reduced during the simulated digestion in vitro, whilst the absorption of fat in the intestine was significantly inhibited. In vivo testing also confirmed that consuming a diet containing CNC-PA significantly reduced elevated levels of triglycerides (TG) compared to the high-fat control group while long-term feeding of a diet containing CNC-PA reduced weight and fat accumulation.

Metal-organic frameworks with a sulfur-rich heterocycle: synthesis, gas adsorption properties, and metal exchange.

Three new three-dimensional (3D) metal-organic frameworks [M2(ttdc)2(dabco)] (M = Zn(II), 1-Zn; Cu(II), 1-Cu; and Zn/Cu, 1-ZnCu) based on thieno[3,2-b]thiophene-2,5-dicarboxylate (ttdc2-) were synthesized and characterized by a combination of physicochemical methods (single crystal X-ray diffraction, powder X-ray diffraction, chemical and thermogravimetric analyses and IR spectroscopy). 1-Cu demonstrated permanent porosity (Vpore = 0.790 cm3 g-1 and SBET = 1725 m2 g-1) and significant CO2, CH4, C2H2, C2H4 and C2H6 gas uptakes under ambient conditions. The adsorption selectivities for gas mixtures, calculated by IAST, were 10.8 (10.7), 14.6 (9.4), 1.7 (1.6) and 1.5 (1.6) for the equimolar gas mixture compositions CO2/N2, C2H6/CH4, C2H6/C2H4 and C2H6/C2H2 at 1 bar and 273 K (298 K), respectively. The mixed-metal compound 1-ZnCu was prepared by a crystal-to-crystal ion exchange metathesis reaction from 1-Zn with a 52% degree of ion substitution, confirmed by energy-dispersive X-ray spectroscopy, optical microscopy and single crystal X-ray diffraction analysis.

How do sectoral elasticities affect the transmission of monetary shocks?

PurposeThe presence of heterogeneity in price stickiness has been previously shown to be the main determinant of the real effects of nominal shocks. The paper presents theoretical results that highlight the significance of labor mobility and intratemporal elasticity of substitution across sectors.Design/methodology/approachThis paper explores output dynamics in a closed economy, relying on a New Keynesian model that accounts for heterogeneity in price stickiness across sectors.FindingsThe key finding from the analytical results is that changes in labor mobility and intratemporal elasticity of substitution across sectors have an equivalent impact on sectoral output when accounting for differences in price stickiness. The model is then calibrated for the US economy using data from the manufacturing and services sectors, providing validation for the analytical results.Originality/valueConventional models often assume either immediate labor reallocation across sectors following shocks or no labor mobility at all. Additionally, these models assume either strong complementarity in consumption or some degree of substitutability. This paper demonstrates the crucial role that labor reallocation and the elasticity of substitution across goods across sectors play in generating well-known economic outcomes.

Model catalytic studies on the thermal dehydrogenation of the benzaldehyde/cyclohexylmethanol LOHC system on Pt(111).

We investigated the dehydrogenation reaction and the thermal robustness of the liquid organic hydrogen carrier (LOHC) couple benzaldehyde/cyclohexylmethanol on a Pt(111) model catalyst in situ in synchrotron radiation photoelectron spectroscopy- and complementary temperature-programmed desorption experiments. The system stores hydrogen in a cyclohexyl group and a primary alcohol functionality and achieves an attractive hydrogen storage capacity of 7.0 mass%. We observed a stepwise dehydrogenation mechanism, characterized by a low temperature dehydrogenation of the alcohol group at 235 K. However, stability limitations challenge the system's applicability as reversible hydrogen storage solution, as the resultant aldehyde was found to decompose during the dehydrogenation of its cyclohexyl group (between 250 and 350 K). A comparison of cyclohexylmethanol with the structurally related secondary alcohol (1-cyclo-hexylethanol; 6.3 mass% hydrogen) revealed a parallel stepwise dehydrogenation pattern for both compounds, but a technically relevant superior thermal robustness of the latter. This demonstrates the influence of the alcohol group's substitution degree on the dehydrogenation characteristics of alcohol-functionalized LOHC compounds. Density functional theory calculations are in good agreement with the experimentally observed stability trend.

공공재적 상(prizes)을 갖는 Tullock 집단 경합 모형에 대한 소고

The rent-seeking contest theory of Tullock has been deriving a lot of studies on competitions between individuals and/or groups in various settings. Among them, we reviews several works that examine Tullock group contests with group-specific public-good prizes in order to enhance our understanding about the effect of the degree of substitution or complementarity between members in a group on their effort incentives for their group’s winning. We also reviews studies on the optimal degree of substitution (complementarity) that maximizes the objective function of a contest organizer and group members’ payoffs, respectively, and endogenous formation of groups in Tullock contest setting as well. This paper may provide helpful knowledge and information that can be referred to design solutions for alleviating wasteful resources spent on rent-seeking behavior in our society.

Preparation of carboxymethylated curdlan oligosaccharides and application on plant disease control

Curdlan is produced by fermentation of microorganisms, which is an insoluble β-(1 → 3)-D-glucans. To better effectively utilize native curdlan, firstly, a derivative from curdlan, carboxymethylated curdlan (CMCD), with different degrees of substitution (DS) DS ∼ 0.20, DS ∼ 0.43 and DS ∼ 0.82 were prepared in this study. Carboxymethylation increases solubility in water more than native curdlan. Moreover, CMCDs were investigated to be hydrolyzed by CcGluE, an endo-β-1 → 3-glucanase and generated the degradation products were oligosaccharides with degrees of polymerization (DP) mainly ranging from 2 to 7. CcGluE also showed high thermal and pH stability when CMCD ∼ 0.43 was used as a substrate. Then these oligosaccharides generated by different CMCDs were applied to Arabidopsis and the activity in inducing defense responses were detected after being treated by the pathogen of Pseudomonas syringae pv tomato DC3000 (Pst DC3000). CMCD (DS ∼ 0.20) degradation oligosaccharide (CMCD ∼ 0.20 OS) pre-treatment was the just one that significantly enhanced the disease resistance to Pst DC3000, which is mediated by the salicylic acid (SA) signaling pathway in plants. The findings offer new insights into the application of curdlan, demonstrating that carboxymethylation enhances its solubility in water. Additionally, the oligosaccharide products derived from CMCD degradation show promising prospects for controlling plant diseases in agriculture.

Increasing degree of substitution inhibits acetate while promotes butyrate production during in vitro fermentation of citric acid-modified rice starch

Citric acid-modified starch functions as a resistant starch, while the combined effects of its fine molecular structure and degree of substitution on gut microbiota are not well understood. To this end, citric acid-modified starches with varying degrees of substitution were synthesized from rice starches with distinct molecular structures and their impact on gut microbiota composition and short-chain fatty acid (SCFA) production was analyzed. Notably, rice starch with a higher degree of substitution significantly reduced acetate production, while promoted butyrate production. Correlation analysis further suggested that amylopectin chains with 12 < DP ≤ 36 and amylose chains with 100 < DP ≤ 500 alter the growth of Faecalibacterium_prausnitzii and Bacteroides_vulgatus, consequentially determining the production of SCFAs. Collectively, these findings indicate that citric acid-modified rice starch with different degrees of substitution can target specific gut bacteria and SCFA production, thus conferring beneficial impact on human health.

Effect of Degree of Substitution and Molecular Weight on Transfection Efficacy of Starch-Based siRNA Delivery System

RNA interference (RNAi) is a promising approach for gene therapy in cancers, but it requires carriers to protect and deliver therapeutic small interfering RNA (siRNA) molecules to cancerous cells. Starch-based carriers, such as quaternized starch (Q-Starch), have been shown to be biocompatible and are able to form nanocomplexes with siRNA, but significant electrostatic interactions between the carrier and siRNA prevent its release at the target site. In this study, we aim to characterize the effects of the degree of substitution (DS) and molecular weight (Mw) of Q-Starch on the gene silencing capabilities of the Q-Starch/siRNA transfection system. We show that reducing the DS reduces the electrostatic interactions between Q-Starch and siRNA, which now decomplex at more physiologically relevant conditions, but also affects additional parameters such as complex size while mostly maintaining cellular uptake capabilities. Notably, reducing the DS renders Q-Starch more susceptible to enzymatic degradation by α-amylase during the initial Q-Starch pretreatment. Enzymatic cleavage leads to a reduction in the Mw of Q-Starch, resulting in a 25% enhancement in its transfection capabilities. This study provides a better understanding of the effects of the DS and Mw on the polysaccharide-based siRNA delivery system and indicates that the polysaccharide Mw may be the key factor in determining the transfection efficacy of this system.

Efficient synthesis of cellulose acetate through one-step homogeneous acetylation of cotton cellulose in binary ionic liquids

Cellulose acetate (CA) is an important cellulose derivative with a wide range of applications. To adopt a more efficient and environmentally friendly method to synthesize cellulose acetate, a binary ionic liquid mixture of 1-butyl-3-methylimidazole chloride salt (BmimCl) and 1-butyl-3-methyldihydroimidazole phosphate (BmimH2PO4) was used. Compared to the conventional methods, this approach didn't require pre-activation of cellulose and the process of homogeneous acetylation proceeded without a catalyst. By simply adjusting the reaction conditions, cellulose acetate with a degree of substitution (DS) in the range of 0.83–3.0 was produced by one-step homogeneous acetylation without hydrolysis. Furthermore, the cellulose acetate film produced by solvent casting exhibited smooth surface characteristics, 95 % transparency, and 57.9 MPa tensile strength. Therefore, this study highlights the importance of using binary ionic liquid mixtures for facile synthesis of cellulose acetate. Due to their excellent transparency and mechanical properties, newly synthesized cellulose acetate films could replace commercial films.

Local Sustained Dinutuximab Delivery and Release From Methacrylated Chondroitin Sulfate.

Neuroblastoma (NB) is the most common pediatric extracranial solid tumor. High-risk NB is a subset of the disease that has poor prognosis and requires multimodal treatment regimens, with a 50% rate of recurrence despite intervention. There is a need for improved treatment strategies to reduce high-risk patient mortality. Dinutuximab is an anti-GD2 antibody ideal for targeting GD2 expressing NB cells, but binding of the antibody to peripheral nerve fibers leads to severe pain during systemic administration. Intratumoral delivery of the anti-GD2 antibody would allow for increased local antibody concentration, without increasing systemic toxicity. Chondroitin Sulfate (CS) is a biocompatible glycosaminoglycan that can be methacrylated to form CSMA, a photocrosslinkable hydrogel that can be loaded with therapeutic agents. The methacrylation reaction time can be varied to achieve different degrees of substitution, resulting in different release and degradation profiles. In this work, 4 and 24 h reacted CSMA was used to create hydrogels at 10% and 20% CSMA. Sustained in vitro release of dinutuximab from these formulations was observed over a 24-day period, and 4 h reacted 10% CSMA hydrogels had the highest overall dinutuximab release over time. An orthotropic mouse model was used to evaluate in vivo response to dinutuximab loaded 4 h methacrylated 10% CSMA hydrogels as compared to bolus tail vein injections. Tumor growth was monitored, and there was a statistically significant increase in the days to reach specific tumor size for tumors treated with intratumoral dinutuximab-loaded hydrogel compared to those treated with dinutuximab solution through tail vein injection. This supports the concept that locally delivering dinutuximab within the hydrogel formulation slowed tumor growth. The CSMA hydrogel-only treatment slowed tumor growth as well, an interesting effect that may indicate interactions between the CSMA and cell adhesion molecules in the tumor microenvironment. These findings demonstrate a potential avenue for local sustained delivery of dinutuximab for improved anti-tumoral response in high-risk NB.

Octenylsuccinated alginate as a delivery agent for encapsulation of bergamot essential oil: Preparation, functional properties and release behavior

This study evaluate the effect of succinylation of sodium alginate (ALG) by octenyl succinic anhydride (OSA) and its effect on the bergamot essential oil (BEO)-loaded ALG beads. The physico-chemical, antioxidant, antibacterial, and in vitro release properties of BEO-loaded ALG beads were assessed. The presence of BEO in alginate beads was assessd using Fourier transform-infrared (FT-IR) spectroscopy, X-ray diffraction (XRD), and differential scanning calorimetry (DSC) experiments. The higher amount of BEO in modified alginate beads at higher degree of substitution (DS) has been confirmed. Accordingly, it was discovered that the DS has notable effects on encapsulation efficiency (EE), loading capacity (LC) of beads, so that the values of EE and LC were about 31–75 % and 19–45 %, respectively, when the DS value of ALG was 0.00–0.022. Besides, BEO-loaded beads prepared using high DS, exhibited higher total phenolic compound (TPC = 21.101 mg garlic acid/g brad), good antioxidant activity (DPPH radical scavenging activity ≈ 69 %) and antibacterial properties (against E. coli and S. aureus). In vitro release analysis showed the initial fast release followed by a slow-release. OSA modification slowed down the release rate of bergamot essential oil from alginate beads. Also, the release of BEO from the beads followed Fickian diffusion.

Phase stability of solid solution La1-xRxRh3B (R = Gd, Lu and Sc) with cubic anti-perovskite type structurecompounds

We have investigated the solid solution range of single phase La1-xRxRh3B (R = Gd, Lu and Sc) compounds with a cubic anti-perovskite type structure. The behaviors of lattice parameters, hardness, and thermogravimetry–differential thermal analysis (TG-DTA) were also investigated. The cubic anti-perovskite phase exists over the entire composition range x from 0.0 to 1.0 for all La-Gd, La-Lu and La-Sc systems. Both the lattice parameters and the hardness in all La-Gd, La-Lu and La-Sc systems show a linear dependence on the degree of the substitution x of La atom. The results of TG-DTA measurements indicate that oxidation of the compounds in air begins at about 500-600 K. The mixed phases of RBO3, R2O3 and Rh are identified as oxidized products around x = 0.4 to 0.6 composition. The oxidation onset temperature, and weight gains due to the oxidation depend on the degree of substitution x. The behavior of crystallographic and physical/chemical properties in the present compounds La1-xRxRh3B strongly depend on the atomic size of the rare-earth atoms that form the cubic framework.