Degree Of Curvature Research Articles

Time and space modulation of substrate curvature to regulate cell mechanical identity

Recently, a variety of microenvironmental biophysical stimuli have been proved to play a crucial role in regulating cell functions. Among them, morpho-physical cues, like curvature, are emerging as key regulators of cellular behavior. Changes in substrate curvature have been shown to impact the arrangement of Focal Adhesions (FAs), influencing the direction and intensity of cytoskeleton generated forces and resulting in an overall alteration of cell mechanical identity. In their native environment, cells encounter varying degrees of substrate curvature, and in specific organs, they are exposed to dynamic changes of curvature due to periodic tissue deformation. However, the mechanism by which cells perceive substrate curvature remains poorly understood. To this aim, a micro-pneumatic device was designed and implemented. This device enables the controlled application of substrate curvature, both statically and dynamically. Employing a combined experimental and simulative approach, human adipose-derived stem cells were exposed to controlled curvature intensity and frequency. During this exposure, measurements were taken on FAs extension and orientation, cytoskeleton organization and cellular/nuclear alignment. The data clearly indicated a significant influence of the substrate curvature on cell adhesion processes. These findings contribute to a better understanding of the mechanisms through which cells perceive and respond to substrate curvature signals. Statement of significanceThis work is our contribution to the comprehension of substrate curvature's function as a crucial regulator of cell adhesion at the scale of focal adhesions and cell mechanical identity. In recent years, a large body of knowledge is continuously growing providing comprehension of the role of various microenvironmental biophysical stimuli in regulating cell functions. Nevertheless, little is known about the role of substrate curvature, in particular, when cells are exposed to this stimulus in a dynamic manner. To address the role of substrate curvature on cellular behavior, a micro-pneumatic device was designed and implemented. This device enables the controlled application of substrate curvature, both statically and dynamically. The experiment data made it abundantly evident that the substrate curvature had a major impact on the mechanisms involved in cell adhesion.

Pisa Syndrome Secondary to Drugs: A Scope Review.

Pisa syndrome, also known as pleurothotonus, is a neurological condition characterized by more than ten degrees of constant lateral curvature of the spine when upright. In this way, the present manuscript aims to systematically review Pisa syndrome secondary to drugs. Two reviewers identified and assessed relevant reports in six databases without language restriction between January 1990 and June 2024. The prevalence of Pisa syndrome varied from 0.037 to 9.3%. We found 109 articles containing 191 cases of drug-induced Pisa syndrome reported in the literature. The mean and median ages were 59.70 (SD = 19.02) and 67 (range = 12-98 years). The most prevalent sex was female, 56.91% (107/188). The most frequent medications associated with Pisa syndrome were acetylcholinesterase inhibitors in 87 individuals. Of 112 individuals in which the onset time from the medication to the movement disorder occurrence was reported, 59 took place within a month. In this way, a return to baseline was observed in 45.50% of the cases, and partial recovery was observed in 14.28%. We proposed new diagnostic criteria for Pisa syndrome based on previous findings in the literature. Moreover, multiple mechanisms are probably involved in balance control and the development of lateral trunk flexions.

Taxonomy for the assessment of the subjective experience of curly hair manageability.

This paper aims to develop and validate a taxonomy for the assessment of the subjective experience of curly hair manageability. It represents the latter of two iterative stages of a mixed-method design interdisciplinary project. The qualitative stage of the study incorporated thematic analysis of 14 interview transcripts generated using a video-ethnographic method (SEBE). A survey-based instrument assessing different elements of the construct of hair manageability designed during the first stage of this project was further developed following consultations with experts with extensive experience in hair research, product development, testing and trichology. The instrument was tested online with 506 female participants self-reporting natural curly hair, types 3A and higher according to the Andre Walker Curl Classification. The initial construct of four groups of hair goals received positive content validity from the experts. High scale reliability was achieved for the aesthetic, haptic and emotive goals' scales as well as for hair esteem (Cronbach's alpha >0.75). Curl type was the only personal hair attribute that was correlated with hair goals and perceptions. From the demographic and lifestyle data, only age was correlated with goals and willingness to try new products. Common hair practices and product usage were also correlated with hair curl and goals. The appropriateness of the instrument for measuring the strength of different hair goals and perceptions relevant to hair curvature degree and hair esteem has been validated. The instrument will support the development and testing of products better aligned with the manageability needs of very curly and textured hair. It was also confirmed that hair curvature is the most significant determinant of practices, and age of product attitudes.

Extended legality of curved boundary integral method.

The angular spectrum method is an efficient approach for synthesizing electromagnetic beams from planar electric field distributions. The electric field definition is restricted to a plane, which can introduce inaccuracy when applying the synthesized beam to curved surface features. The angular spectrum method can also be interpreted as a pure source method defining the field symmetrically with respect to the creation plane. Recently, we generalized that symmetric field method to arbitrary source distributions, which are valid at any point on compact, regular surface Ω in R 3. We call this approach the Curved Boundary Integral method. The electromagnetic fields synthesized with this method satisfy the Helmholtz equation and are adjusted via amplitude and phase at the desired surface. The fields are obtained as a relatively simple integral. However, restrictions on where in space the synthesized field is valid were included in the mathematical proof length to avoid obscuring the main points. These restrictions can be significant depending on the shape and degree of curvature of surface Ω. In this article, we remove these restrictions so that the integral representation of the electromagnetic beam becomes valid at all points r∈R 3∖Ω, with a minor restriction. Its modification can work even on Ω. We demonstrate the importance of this extended legality with a source field parametrized into the torus surface. The electromagnetic radiation of this structure would not be valid at any point in space without this extension. Finally, we show that by changing the order of integration, the field singularity at each source point is eliminated.

Prediction of adolescent idiopathic scoliosis with machine learning algorithms using brain volumetric measurements.

It is known that neuroanatomical and neurofunctional changes observed in the brain, brainstem and cerebellum play a role in the etiology of adolescent idiopathic scoliosis (AIS). This study aimed to investigate whether volumetric measurements of brain regions can be used as predictive indicators for AIS through machine learning techniques. Patients with a severe degree of curvature in AIS (n = 32) and healthy individuals (n = 31) were enrolled in the study. Volumetric data from 169 brain regions, acquired from magnetic resonance imaging (MRI) of these individuals, were utilized as predictive factors. A comprehensive analysis was conducted using the twelve most prevalent machine learning algorithms, encompassing thorough parameter adjustments and cross-validation processes. Furthermore, the findings related to variable significance are presented. Among all the algorithms evaluated, the random forest algorithm produced the most favorable results in terms of various classification metrics, including accuracy (0.9083), AUC (0.993), f1-score (0.970), and Brier score (0.1256). Additionally, the most critical variables were identified as the volumetric measurements of the right corticospinal tract, right corpus callosum body, right corpus callosum splenium, right cerebellum, and right pons, respectively. The outcomes of this study indicate that volumetric measurements of specific brain regions can serve as reliable indicators of AIS. In conclusion, the developed model and the significant variables discovered hold promise for predicting scoliosis development, particularly in high-risk individuals.

Extraction of Arbors from Terrestrial Laser Scanning Data Based on Trunk Axis Fitting

Accurate arbor extraction is an important element of forest surveys. However, the presence of shrubs can interfere with the extraction of arbors. Addressing the issues of low accuracy and weak generalizability in existing Terrestrial Laser Scanning (TLS) arbor point clouds extraction methods, this study proposes a trunk axis fitting (TAF) method for arbor extraction. After separating the point cloud data by upper and lower, slicing, clustering, fitting circles, obtaining the main central axis, filtering by distance, etc. The canopy point clouds are merged with the extracted trunk point clouds to precisely separate arbors and shrubs. The advantage of the TAF method proposed in this study is that it is not affected by point cloud density or the degree of trunk curvature. This study focuses on a natural forest plot in Shangri-La City, Yunnan Province, and a plantation plot in Kunming City, using manually extracted data from a standardized dataset of samples to test the accuracy of the TAF method and validate the feasibility of the proposed method. The results showed that the TAF method proposed in this study has high extraction accuracy. It can effectively avoid the problem of trunk point cloud loss caused by tree growth curvature. The experimental accuracy for both plots reached over 99%. This study can provide certain technical support for arbor parameter extraction and scientific guidance for forest resource investigation and forest management decision-making.

On the Role of Nonlocal Strain Gradient Elasticity in Nonlinear Buckling of FG Porous Reinforced Curved Nanobeams Having Different Degrees of Curvature

Curved nanobeams are one of the essential components in manufacturing nano-electromechanical systems needing nonlinear stability design. In the current investigation, the nonlinear buckling characteristics of functionally graded porous reinforced curved (FGPRC) nanobeams having different degrees of curvature are analyzed by counting the higher-order gradients of the classical strain tensor as well as nonlocal-type interatomic interactions. In this regard, two independent length-scale constants within the framework of the nonlocal strain gradient theory (NSGT) of continuum elasticity are taken into account. Via employing the promising low computational cost and geometrically adaptable method of isogeometric collocation, various branches of NSGT-based equilibrium graphs of FGPRC nanobeams are plotted relevant to each considered degree of curvature. It is extrapolated that the quantity of graphene platelet (GPL) weight fraction has a negligible influence on the significance of nonlocal-type of interatomic size dependency as well as the strain gradient kind of small-scale effect in the value of the maximum deflections or lateral loads at the detected limit points, especially attributed to a higher degree of curvature. Besides, it can be remarked that, in the FGPRC nanobeam owning a small degree of curvature, lessening the quantity of porosity index results in an increment in the significance of the nonlocal-type of interatomic size dependency as well as the strain gradient kind of small-scale effect on the maximum deflection at both upper and lower limit points. However, in the FGPRC nanobeams owning medium and large degrees of curvature, it gets lesser at the upper limit point, but becomes higher at the lower limit one.

Field curvature analysis and optimization method for near-eye display systems

Near-eye display (NED) systems with a large field of view (FOV) and a large pupil are often accompanied by field curvature. In such cases, there is often a significant deviation between the virtual image seen by the human eye and an ideal plane. Currently, there is a lack of precise methods for describing and controlling the shape of virtual images in visual space. In this paper, the system is modeled, and the curvature is controlled through optimization. Under limited conditions, the system’s field curvature is controlled to approach an ideal state. When the system’s field curvature cannot be completely corrected, a method for describing the virtual image surface is introduced. This method helps optical designers effectively predict the degree of curvature and the distance of the virtual image. The image quality of the system with a curved image is evaluated and optimized based on the focusing function of the human eye. Additionally, the field curvature and pupil swim are analyzed jointly. The effectiveness of the method is verified by designing two different types of NED systems.

Multimodal treatments based on Tadalafil during acute phase of Peyronie's disease: experience at two referral academic centers.

The purpose of this study is to identify the clinical outcomes of patients during acute phase of Peyronie's disease (PD) treated with daily Tadalafil 5mg associated with non-surgical treatments such as intra-plaque verapamil injections (IVI), vacuum erection devices (VED) or extra corporeal shockwave therapy (ESWT). 445 patients with PD in acute stage were treated as it follows: Group 1(G1) 117 men with only Tadalafil 5mg once a day for 3months; Group 2(G2) 106 men with IVI plus Tadalafil 5mg for a period of 12weeks; Group 3(G3) 124 men that received ESWT for 6weeks plus Tadalafil with the same protocol of G1; Group 4(G4) 98 men with VED plus Tadalafil 5mg for 3months. There were assessed at baseline and follow-up: Erectile dysfunction (ED), presence and severity of painful erections, penile plaque size and penile curvature degree. The results were evaluated at baseline and 3,6,12months. Not statistically significant differences emerged between the two groups at baseline, except for higher presence of patients with ED in in G3(7.4%) vs other groups(p < 0.001). Three months after the treatment in G3 men had a significant reduction of penile curvature degrees after 1year by treatments, whereas pain in an erection or during intercourse was resolved completely in 75% of the patients. Our study highlights that multimodal therapy has beneficial long-term effects not only in the decrease of ED symptoms, but also in the relief of the penile curvature and the quality of life.

INFLUENCE OF WELDING PARAMETERS ON THE PERFORMANCE CHARACTERISTICS OF THE THERMOCATODES

Methods of controlling welding parameters, physical and physico-chemical transformations that occur during welding are considered in the work. The physico-chemical mechanism of welding is considered - the deformation of the crystal lattice, the transfer of metal on the contacting surfaces, the mixing of deformation products, diffusion, phase transformations, the appearance of new chemical compounds - intermetallics, oxides, carbides. Studies of the influence of the main parameters of friction welding on the formation of the structure of the welded joints of the investigated alloys have been carried out. The microstructures of welded joints OT4 + VN-2AE and VT6 + VN-2AE are given. The obtained dependence of the relative strength of the OT 4 + VN-2AE connection on the parameters of the welding process. The given microstructures were obtained by SEM from the surface of OT 4 + VN-2AE and VT6 samples, based on which it was determined that the destruction begins with the formation of microcracks in the contact zone on the side of the VN-2AE niobium alloy. It was determined that a layer saturated with oxygen is formed in the diffusion zone due to which the β-modification of Ni2O5 with a significant specific volume is formed, which causes high internal stresses and the formation of microcracks. The reason for the decrease in the mechanical properties of the welded joint OT 4 + ВН-2АЕ was established - the formation of a phase (Ti-Nb) with an orthorhombic lattice, the degree of curvature of which determines the degree of strengthening of the layer and depends on the niobium content. These data are confirmed by X-ray structural analysis. The analysis of the concentration curves of niobium and titanium shows that titanium does not diffuse into the narrow contact zone of the niobium alloy, and niobium forms a wide diffusion zone in the contact zone of the OT 4 alloy. It was established that niobium contributes to the increase in the solubility of aluminum in λ-titanium, which leads to increase in weldability plasticity and corrosion resistance. It was determined that the low mechanical properties of the welded joints of the VN-2AE alloy with the OT-4 and VT-6 titanium alloys are due to the same nature - the oxidation of the niobium alloy at the welding temperature. It was established that the weak link of the welded joint is the surface of the niobium alloy.

Silvery fullerene in Ag102 nanosaucer.

Despite the discovery of a series of fullerenes and a handful of noncarbon clusters with the typical topology of I h-C60, the smallest fullerene with a large degree of curvature, C20, and its other-element counterparts are difficult to isolate experimentally. In coinage metal nanoclusters (NCs), the first all-gold fullerene, Au32, was discovered after a long-lasting pursuit, but the isolation of similar silvery fullerene structures is still challenging. Herein, we report a flying saucer-shaped 102-nuclei silver NC (Ag102) with a silvery fullerene kernel of Ag32, which is embraced by a robust cyclic anionic passivation layer of (KPO4)10. This Ag32 kernel can be viewed as a non-centered icosahedron Ag12 encaged into a dodecahedron Ag20, forming the silvery fullerene of Ag12@Ag20. The anionic layer (KPO4)10 is located at the interlayer between the Ag32 kernel and Ag70 shell, passivating the Ag32 silvery fullerene and templating the Ag70 shell. The t BuPhS- and CF3COO- ligands on the silver shell show a regioselective arrangement with the 60 t BuPhS- ligands as expanders covering the upper and lower of the flying saucer and 10 CF3COO- as terminators neatly encircling the edges of the structure. In addition, Ag102 shows excellent photothermal conversion efficiency (η) from the visible to near-infrared region (η=67.1%±0.9% at 450nm, 60.9%±0.9% at 660nm and 50.2%±0.5% at 808nm), rendering it a promising material for photothermal converters and potential application in remote laser ignition. This work not only captures silver kernels with the topology of the smallest fullerene C20, but also provides a pathway for incorporating alkali metal (M) into coinage metal NCs via M-oxoanions.

Modified Essed–Schroder Technique in Congenital Penile Curvature: Long-Term Outcomes and Quality of Life Evaluation

Background. In this study, long-term functional, cosmetic, and quality-of-life outcomes of patients with congenital penile curvature who were operated on using the modified Essed–Schröder procedure were evaluated. Materials and Methods. Between 2009 and 2022, 233 patients with congenital penile curvature were operated using a modification of the Essed–Schröder technique. The average age of the cases was found to be 23.7 ± 4.6 (18–37). The mean postoperative follow-up period was 76.1 ± 16.8 (18–153) months. At the end of the follow-up period, 203 of 233 patients were interviewed retrospectively, and standard questionnaires were filled out to evaluate the functional, cosmetic, and quality-of-life results of the procedure. Results. There was a curvature ventral in 103, left lateral in 40, right lateral in 30, dorsal in 17, dorsolateral in 8, and ventrolateral in 5 cases. The mean degree of curvature was found to be 51.7 ± 9.4 (30–80). Recurrent curvature was detected in 16 cases (7.14%), and discomfort due to suture palpation was detected in 17 cases (8.37%). No case reporting erectile dysfunction was detected. 90.6% of the patients reported that they were satisfied with the operation. As a result, the curvature was effectively corrected, and the sensation of postoperative suture palpation was minimized. It has been determined that it increases patient and partner satisfaction and improves the quality of life. Conclusions. The modified Essed–Schröder technique is a relatively simple technique and provides successful functional and cosmetic results. It also provides a significant improvement in quality of life.

Comprehensive Assessment of Cyclic Fatigue Strength in Five Multiple-File Nickel-Titanium Endodontic Systems.

The resistance of nickel-titanium endodontic instruments against cyclic fatigue failure remains a significant concern in clinical settings. This study aimed to assess the cyclic fatigue strength of five nickel-titanium rotary systems, while correlating the results with the instruments' geometric and metallurgical characteristics. A total of 250 new instruments (sizes S1/A1, S2/A2, F1/B1, F2/B2, F3/B3) from ProTaper Gold, ProTaper Universal, Premium Taper Gold, Go-Taper Flex, and U-Files systems underwent mechanical testing. Prior to experimental procedures, all instruments were meticulously inspected to identify irregularities that could affect the investigation. Using a stereomicroscope, design characteristics such as the number of spirals, length, spirals per millimeter, and average helical angle of the active blade were determined. The surface finishing characteristics of the instruments were examined using a scanning electron microscope. Differential scanning calorimetry was employed to establish the instruments' phase transformation temperatures, while energy-dispersive X-ray spectroscopy was utilized to analyze the elemental composition of the alloy. The instruments were subjected to cyclic fatigue testing within a stainless steel non-tapered artificial canal featuring a 6 mm radius and 86 degrees of curvature. Appropriate statistical tests were applied to compare groups, considering a significance level of 0.05. The assessed design characteristics varied depending on the instrument type. The least irregular surface finishing was observed in U-Files and Premium Taper Gold files, while the most irregular surface was noted in Go-Taper Flex. All instruments exhibited near-equiatomic proportions of nickel and titanium elements, whereas ProTaper Universal and U-Files instruments demonstrated lower phase transformation temperatures compared to their counterparts. Larger-sized instruments, as well as ProTaper Universal and U-Files, tended to display lower cyclic fatigue strength results. Overall, the design, metallurgical, and cyclic fatigue outcomes varied among instruments and systems. Understanding these outcomes may assist clinicians in making more informed decisions regarding instrument selection.

Focal adhesion and actin orientation regulated by cellular geometry determine stem cell differentiation via mechanotransduction

Tuning cell adhesion geometry can affect cytoskeleton organization and the distribution of cytoskeleton forces, which play critical roles in controlling cell functions. To elucidate the geometrical relationship with cytoskeleton force distribution, it is necessary to control cell morphology. In this study, a series of dextral vortex micropatterns were prepared to precisely control cell morphology for investigating the influence of the curvature degree of adhesion curves on intracellular force distribution and stem cell differentiation at a sub-cellular level. Peripherial actin filaments of micropatterned cells were assembled along the adhesion curves and showed different orientations, filament thicknesses and densities. Focal adhesion and cytoskeleton force distribution were dependent on the curvature degree. Intracellular force distribution was also regulated by adhesion curves. The cytoskeleton and force distribution affected the osteogenic differentiation of mesenchymal stem cells through a YAP/TAZ-mediated mechanotransduction process. Thus, regulation of cell adhesion curvature, especially at cytoskeletal filament level, is critical for cell function manipulation. Statement of significanceIn this study, a series of dextral micro-vortexes were prepared and used for the culture of human mesenchymal stem cells (hMSCs) to precisely control adhesive curvatures (0°, 30°, 60°, and 90°). The single MSCs on the micropatterns had the same size and shape but showed distinct focal adhesion (FA) and cytoskeleton orientations. Cellular nanomechanics were observed to be correlated with the curvature degrees, subsequently influencing nuclear morphological features. As a consequence, the localization of the mechanotransduction sensor and activator-YAP/TAZ was affected, influencing osteogenic differentiation. The results revealed the pivotal role of adhesive curvatures in the manipulation of stem cell differentiation via the machanotransduction process, which has rarely been investigated.

Surface roughness and cyclic fatigue resistance of a novel shaping system: An in-vitro study.

Recently developed Nickel-Titanium (NiTi) instruments with practical changes have resulted in safer instrumentation. In addition, topographical features on the file surface are a contributing factor to clinical durability. Therefore, this study aimed to investigate both the cyclic fatigue resistance and the roughness change of MTwo and Rotate instruments (VDW, Munich, Germany). Each instrument (n = 6/each group) was scanned with an atomic force microscopy prior to and after instrumentation. In addition, cyclic fatigue testing was conducted for each instrument (n = 11/each group) with stainless-steel blocks, including 45°-60°-90° degrees of curvature milled to the instruments' size. The roughness parameters increased for both systems after instrumentation (p<0.05). Both systems presented an increased roughness following instrumentation (p<0.05). The cyclic fatigue resistance was lowest at 90° for both systems (p<0.05), whereas the Rotate files presented a higher resistance than that of the Mtwo files (p<0.05). Compared to the Mtwo files, Rotate files presented better resistance, while the resistance decreased as the curvature increased.

Influence of spatial variability in surrounding rock on fracture propagation in compressed air energy storage caverns

The expansion of fractures around underground caverns for compressed air energy storage (CAES) has a significant impact on engineering stability. We established a thermo-mechanical coupled random phase field model to investigate the trajectory of fractures in the heterogeneous surrounding rock of underground gas storage caverns. By simulating the different mechanical parameters under different coefficients of variation and autocorrelation distances, we explored the impact of spatial variability of rock mass on the fracture mode of surrounding rock in underground gas storage caverns. The results indicate that when only the spatial variability of elastic modulus is considered, the coefficient of variation primarily affects the inclination and curvature degree of fractures while the autocorrelation distance has a slight impact on the bending shape of fractures. When only the spatial variability of fracture energy release rate is considered, both the coefficient of variation and the autocorrelation distance have a negligible effect on fracture propagation. Compared with the elastic modulus of the rock mass, the fracture energy release rate has a more significant impact on the path of the cavern fractures.

Numerical simulation of cellular blood flow in curved micro-vessels with saccular aneurysms: Effect of curvature degree and hematocrit level.

The dynamics of cellular blood flow in curved vessels considerably differ from those in straight vessels. It is reported that clotting development is significantly affected by vessel shape irregularities. Thus, the current study aims to investigate the effect of curvature degree and hematocrit level on cellular blood flow in a curved micro-vessel with a saccular aneurysm. Accordingly, a three-dimensional numerical simulation is performed using a validated code developed for cellular blood flow problems. The obtained results show that the cell-free layer thickness is highly dependent on the curvature degree and hematocrit level, which may have a remarkable impact on the apparent viscosity of blood as well as the dynamics of other particles such as drug particulates. The near-wall region exhibits the highest degree of cell deformation, whereas the red blood cells within the aneurysm zone remain nearly undeformed. Meanwhile, the velocity of the red blood cells decreases with the increase in curvature degree, which can affect the quality of the oxygenation process. Because of the saccular aneurysm, a considerable decrease in plasma velocity is predicted. Moreover, no secondary flows are detected in the curved vessel except in the aneurysm zone. An increase in the curvature degree is expected to reduce the blood flow rate by about 10%. Furthermore, low wall shear stress values are predicted in the straight case compared to the values at the apex of the curved vessel, which may affect the structure and function of the endothelial cells of the vessel wall and, hence, increase the aneurysm rupture possibility.

Performance on a contour integration task as a function of contour shape in schizophrenia and controls

Contour Integration (CI) is the ability to integrate elemental features into objects and is a basic visual process essential for object perception and recognition, and for functioning in visual environments. It is now well documented that people with schizophrenia (SZ), in addition to having cognitive impairments, also have several visual perceptual deficits, including in CI. Here, we retrospectively characterize the performance of both SZ and neurotypical individuals (NT) on a series of contour shapes, made up of Gabor elements, that varied in terms of closure and curvature. Participants in both groups performed a CI training task that included 7 different families of shapes (Lines, Ellipse, Blobs, Squiggles, Spiral, Circle and Letters) for up to 40 sessions. Two parameters were manipulated in the training task: Orientation Jitter (OJ, i.e., orientation deviations of individual Gabor elements from ideal for each shape) and Inducer Number (IN, i.e., number of Gabor elements defining the shape). Results show that both OJ and IN thresholds significantly differed between the groups, with higher (OJ) and lower (IN) thresholds observed in the controls. Furthermore, we found significant effects as a function of the contour shapes, with differences between groups emerging with contours that were considered more complex, e.g., due to having a higher degree of curvature (Blobs, Spiral, Letters). These data can inform future work that aims to characterize visual integration impairments in schizophrenia.

Optimization of SOFC Anode Microstructure for Performance and Highly Scalable Cells Through Graded Porosity

Anode porosity is fundamental to the performance and durability of SOFCs. This research evaluated the role of pore former loading in the anode layer to optimize the trade-off between cell performance and flatness. It was found that intermediate levels of organic loading through pore former resulted in the highest performance while also the greatest degree of curvature. Grading the porosity such that it decreases towards the electrolyte improved the performance at lower temperatures and fuel ratios. Graded anodes only improved flatness when larger loadings of pore former were used, but this resulted in a loss of performance. When considering both flatness and curvature, graded anodes resulted in cells that were flat and had decent but not the highest performance. Based on our results, the anode microstructure closest to the electrolyte strongly affects performance, while the microstructure towards the fuel affects flatness.

HYDRODYNAMIC MEANS OF HEAT EXCHANGE INTENSIFICATION IN CONSTANT CROSS-SECTION ROUND CHANNELS

The purpose of research is the analysis of innovative designs of hydrodynamic means of intensification of heat exchange in channels of constant cross-section of technological equipment and pipelines, intended for use in the thermal power, chemical, food and related industries. The study of the state of the issue and trends in the development of structural and technological design of hydrodynamic elements of pipes and tubular elements for the intensification of heat exchange are based on a critical analysis of scientific and technical sources of information and, first of all, patent information of the leading countries of the world. The classification of these means for intensification of heat exchange in equipment and pipelines of thermal energy, chemical, food and related industries is proposed. The most interesting designs of these elements proposed by scientists, designers and inventors of the leading countries of the world are considered. A critical assessment of most of the above constructions is provided, their advantages and disadvantages are discussed. Designs of means of intensification of heat exchange in channels are analyzed depending on the change in flow continuity, the degree of mobility of the working element, the nature of the effect on the flow over time, relative length, assembly/disassembly possibilities, the degree of curvature of the channel, material, level of assembly, the degree of rigidity, the degree of mobility of the working element, the possibility of changing the geometry of the working channel , the possibility of temperature regulation, as well as the degree of uniformity of the heat flow in the circular direction of the channel. Means according to the change of flow continuity, namely turbulizers and cavitators, were analyzed in more detail. It is shown that, despite the significant variety of structural and technological design of hydrodynamic means of heat exchange intensification in round channels of constant cross-section, the most demanded by the industry are technologically diverse removable turbulizers that can be replaced or completely removed from the channel if necessary. Less common are cavitators, because they are usually characterized by less versatility and manufacturability, as well as greater sensitivity to the flow rate of the transported flow and its physical properties. Bibl. 44, Fig. 19.