Photonic Crystal Defect Research Articles

Effect of graphene on absorption spectrum of Si/SiO2 multilayer

In recent decades, photonic crystals have emerged as a key technology in several fields, including light management, photovoltaics, detection, and lasing. This success can be attributed to the ability to regulate electromagnetic waves, which can be achieved by, through a variety of techniques, disruption the periodicity of crystals. In this study, the introduction of graphene as a material defect in a one-dimensional photonic crystal consisting of six Si/SiO2 patterns is subjected to investigation. The calculations are performed using the transfer matrix method, with the experimental data serving as the input, following a protocol that involves exploring the variation of the absorption spectra as a function of the parameters of the material system and the incident electromagnetic wave. The findings illustrate that the absorption peak exhibits a pronounced dependency on the positioning of the material defect, the graphene layer thickness, and the incident angle. This paves the way for a more detailed inquiry into its potential utility in the domain of detection.

CaF2/TiO2 nanophotonic biosensor based on a one-dimensional photonic crystal for Chikungunya virus detection

An optical sensor based on a defective photonic crystal is proposed to identify the Chikungunya virus in blood components, including plasma, platelets, red blood cells (RBCs), and uric acid. Under healthy conditions, each blood component has a unique refractive index; this value is altered if the person is infected with the Chikungunya virus. The infected blood sample results in a deviation in the refractive index of the sample as compared to a normal sample due to the presence of the infection in the human blood. With the help of our suggested structure, this alteration can be detected, and the normal cell can be distinguished from the infected one. To simulate the results, the transfer matrix method (TMM) is applied. The sensitivity of the suggested structures loaded separately with the sample containing plasma, platelets, red blood cells, and uric acid is found to be 1411, 1352, 1335, and 795 nm/RIU, respectively. These results are enough to support our claim that the present design can be used as an ultra-sensitive nanophotonic biosensor for the detection of the Chikungunya virus.

Two-dimensional valley photonic crystal resonant cavities

Introducing defects in photonic crystals is a common method for manipulating and controlling the propagation of electromagnetic waves. By introducing defects in photonic crystal waveguides, the periodicity of the waveguide structure can be disrupted, local modes can be formed, and resonant cavity functions can be achieved. In this study, we designed two groups of two-dimensional valley photonic crystal waveguides, each of which uses different methods to introduce defects and obtained different resonant cavity structures, and designed a resonant cavity sensor. We conducted a detailed theoretical analysis of the resonant cavity through simulation software. In addition, we fabricated the samples and conducted microwave experiments to demonstrate the accuracy of our theoretical research. Our research provides guidance for the application of photonic crystal devices.

Enhanced four-band absorption in a tunable graphene subwavelength grating structure for photodetection

This paper investigates a sub-wavelength multilayer dielectric grating structure based on a simple metasurface, achieving dynamically switchable four-band absorption enhancement. This enhancement spans the visible to near-infrared (NIR) range, with absorption exceeding 90%, representing nearly a 40-fold increase over the intrinsic absorption of a single graphene layer. The contributions of guided-mode resonance (GMR), optical Tamm state (OTS), and photonic crystal defect cavity resonance to the absorption spectra are analyzed separately, offering a method for independent multi-channel signal extraction. Additionally, we explore the impact of structural parameters on the absorption response and examine the broad-spectrum multiband detection mechanism. This mechanism, explained through the integration of resonant cavity perturbation theory and the dynamic tuning of absorption efficiency via graphene's Fermi energy levels, results in an independently tunable optical system for four key operating bands. These properties make the structure suitable for applications such as multiband biomedical photodetectors or components in optoelectronic devices with multiple operating bands.

Multiband and bidirectional multiplexing asymmetric optical transmission empowered by nanograting-coupled defective multilayer photonic crystal

Asymmetric optical transmission (AOT) has been an enduring hot topic of interest in various fields, including optical communication, information processing, and so on. Particularly, the development of reciprocal micro-nanostructures achieving AOT further facilitates and accelerates the miniaturization and integration of traditional optical components. However, most of these optical components merely consider a single AOT band and transmission in a specified direction, limiting the development of their versatile functions. In this paper, we theoretically propose an all-dielectric metamaterial consisting of a nanograting and a defective multilayer photonic crystal, exhibiting multi-band and bidirectional multiplexing AOT. More specifically, the proposed metamaterial demonstrates both narrowband and wideband AOT for incidence from the nanograting to the photonic crystal, and a completely different narrowband AOT for the opposite incidence, namely, from the photonic crystal to the nanograting. These distinctive AOT spectral features are achieved by matching the diffraction effect of the nanograting with the special energy band of the defective multilayer photonic crystal. Remarkably, the device exhibits a transmittance difference of up to 0.974 and a contrast ratio of up to 0.997 (transmittance ratio of up to 673), with a transmission bandwidth of 62.7 nm for incident light with a wavelength of 624 nm illuminating from the nanograting to the defective multilayer photonic crystal. Furthermore, the bandwidth and number of transmission bands can be flexibly tuned by changing the polarization angle of the incident light, showcasing its excellent polarization multiplexing characteristics. The designed metamaterial provides an effective strategy for the realization of versatile AOT devices and is conducive to expanding the application scenarios of AOT devices.

Tunable polarization-dependent defect modes and lateral shifts of one-dimensional photonic crystals containing Dirac semimetal-based hyperbolic metamaterials and chiral materials

The transmission and lateral shift properties of the one-dimensional photonic crystals containing Dirac semimetal-based hyperbolic metamaterials and chiral material defects are theoretically investigated by using the transfer matrix method in terahertz. It is found that the angle-independent omnidirectional photonic bandgaps (PBGs) for p-polarization can be realized in the photonic crystals made of dielectric and the Dirac semimetal-based hyperbolic metamaterials. However, the PBGs are blue-shifted with the incident angle for s-polarized wave. The omnidirectional PBGs can be tunable with the Fermi energy of the Dirac semimetal, the thickness ratio of the constitute layers and the structural parameters. When one or two isotropic chiral material layers are introduced in the photonic crystals, double or four polarization-dependent defect modes are found in the bandgap under oblique incidence due to the coupling and conversion between different polarized waves in the chiral defects. The frequency interval of the defect modes changes with the chirality parameter and the incident angle. It is also found that when a light is incident on the defective photonic crystals, the giant positive and negative Goos-Hänchen shifts of co-polarization reflected waves can be induced around the defect modes, which are sensitive to the polarization, the incident angle, the incident frequency and the chirality. The special optical properties of the proposed defective multiplayers provide possibilities for practical applications in designing polarization sensitive optical devices, such as filter and sensor.

The sensitivity of refractive index sensors based on defected 1D photonic crystals: an analytical approach

In this paper, an analytical formula for the sensitivity of optical sensors based on one-dimensional photonic crystals (PCs) with a defect was derived for the first time. Based on this formula, a comparative analysis of the sensitivity of defected PCs with and without mirror symmetry was carried out. In addition, the exact values of sensitivity in the limit of an infinite PC with a quarter-wave unit cell were obtained. It was shown that the sensitivity of a defective PC with an infinitely thick defect layer is equal to that of a perfectly reflecting Fabry–Perot resonator and does not depend on the specific structure of the PC. The results of this work provide a significant simplification of the analysis and optimization of optical sensors based on defective PCs, as well as a better understanding of the numerous numerical results obtained previously.

Coherent control of nonreciprocal optical properties of the defect modes in 1D defective photonic crystals with atomic doping

We investigate the spectral properties of photonic crystals, lacking parity-time (PT) symmetry, using scattering matrix formalism. We show using the symmetry properties of matrices that a defective photonic crystal, doped with three-level atoms, breaks PT symmetry. For the two defect modes lying in the band gap region, both the reflection and the absorption become nonreciprocal, while the transmission remains reciprocal. We show that the relevant energy spectra do not exhibit exceptional points, thereby invalidating its necessity to achieve non-reciprocity in reflection and absorption. We further demonstrate how this non-reciprocity can be coherently controlled using the driving field and dissipation rates of the atoms.

Goos-Hänchen shift in cryogenic defect photonic crystals composed of superconductor HgBa2Ca2Cu3O8+δ

We explore theoretically Goos-Hänchen (GH) shift around the defect mode in superconducting defective photonic crystals (PCs) in cryogenic environment. The defective PCs are constructed by alternating semiconductors and superconductors. A defect mode arises in the photonic bandgap and sensitively depends on environment temperature and hydrostatic pressure. Reflection and transmission coefficient phases make an abruptly jump at the defect mode and giant GH shifts have been achieved around this mode. The maximum GH shift can get as high as 103λ (incident wavelength), which could be modulated by the values of temperature and hydrostatic pressure. This study may be utilized for pressure- or temperature-sensors in cryogenic environment.

A neural network model for point defect microcavities of two-dimensional GaAs media background photonic crystals

This paper aims to address the challenge of constructing, training, and optimizing a neural network model for the point defect microcavity of a two-dimensional GaAs media background photonic crystal. The objective is to achieve more accurate predictions and analyses of photon modes, thereby enhancing the performance of the microcavity. Due to the structural complexity and multi-parameter nature of point defect microcavities, traditional analysis methods often fail to capture their optical behavior adequately. Consequently, there is a need for a novel approach to establishing an optical model for point defect microcavities, enabling precise predictions of their optical properties and optimal design. In this study, the MPB computing tool developed by MIT, in conjunction with the programming language Scheme, MATLAB, and the Ubuntu virtual machine platform, was utilized for data acquisition. The neural network model was employed to process the input data of the photonic crystal point defect microcavity, leading to predictions and analyses. This interdisciplinary approach results in a high-precision model of the microcavity. The neural network model is capable of nonlinear mapping and prediction by learning the patterns and features of the data. Additionally, this combination holds the promise of enabling more efficient optical information processing and increased data transfer rates. The relationship between the energy band data and the structure of photonic crystals exhibits a high degree of nonlinearity. The neural network model proposed in this paper can infer the structure of photonic crystals based on the photon energy band (dispersion relation ω-K) of micro-cavity structures with point defects in different photonic crystals. This provides a valuable reference for more accurate predictions and analyses of photon modes in complex photonic crystal micro-cavities, ultimately leading to improved micro-cavity performance.

Azimuthal modulation of light propagation through 1DPCs via efficient nonlinear frequency mixing

The present study aims to investigate the transmitted and reflected light beams from a one-dimensional defect photonic crystal (1DPC) composed of a three-level ladder-type quantum system. The lower leg of the ladder scheme is driven by a weaker probe beam, while the upper leg is driven by a stronger control beam. Unlike natural atoms, this type of model with broken symmetry permits the generation of a sum-frequency signal beam between the majority of higher and lower quantum states, resulting in the formation of a cyclic closed-loop arrangement for the interaction between light and matter. The Laguerre Gaussian (LG) field with strong coupling and a weak probe light interact with the quantum system. A new weak signal light is produced as a result of the system’s symmetric breakdown, and the medium becomes azimuthal dependent. We investigate the spatial dependence of the transmitted and reflected light from a defect 1DPC by using azimuthal modulation of the LG light. Additionally, we will discuss how the absorption spectrum’s spatial modulation varies with winding numbers. We discover that in certain regions, the gain can be realized without population inversion under certain specified parametric parameters.

Two-dimensional silicon-based dielectric column photonic crystal point defect microcavity Neural network modelling

In order to solve the problem that it is difficult to predict the microcavity photonic energy bands of point defects in two-dimensional silicon-based dielectric column photonic crystals, this paper proposes a method to predict the microcavity photonic energy bands of point defects in two-dimensional silicon-based photonic crystals by using an artificial neural network model. In this paper, the energy band structure of triangular lattice point defects at different radii is calculated using MPB, and a neural network model is established based on this data and the accuracy of the established model is verified.

Effect of thickness and applied pressure on quality factor in defective photonic crystals composed of polymer materials

In this work, we employed the transfer-matrix method to obtain the transmittance spectrum of a defective one-dimensional photonic crystal composed of polymer materials. We consider that the dielectric constant of the polymers is a function of the applied pressure, and the cavity is infiltrated by plasma cells. When blood plasma concentration and cavity thickness are increased, we observe a defective mode tuned to long wavelengths within the photonic band gap. By calculating the energy stored in the cavity, a maximization of the quality factor to [Formula: see text] for a 2350[Formula: see text]nm cavity was observed. In addition, we report that as the applied pressure increases, the defective mode shifts to shorter wavelengths, accompanied by a decrease in the quality factor to [Formula: see text] for a pressure of 100[Formula: see text]MPa.

Omnidirectional near-infrared narrowband filters based on defective mirror-symmetry one-dimensional photonic crystals containing hyperbolic metamaterials

The photonic band gap (PBG) of conventional all-dielectric one-dimension (1D) photonic crystal (PC) shifts towards the shorter wavelength (blueshift) as the incident angle increases, thus the defect mode in conventional defective all-dielectric 1DPC is also blueshifted. This leads to many limitations on the performance of the narrowband filtering. Recently, the emergence of the redshift PBG in 1DPC containing hyperbolic metamaterials (HMMs) for transverse magnetic (TM) polarization provides a possibility to achieve angle-insensitive defect mode in defective 1DPC containing HMMs. In this paper, we designed a mirror-symmetry 1DPC filter containing HMMs, and the HMM layers consist of subwavelength molybdenum disulfide/indium tin oxide (MoS2/ITO) multilayers, an omnidirectional defect mode at 1805.6 nm was achieved by phase compensation in mirror-symmetry 1DPC containing HMMs for the incident angle of 0˚-60˚, with a transmittance efficiency of 100 % at the vertical incidence. The position of the omnidirectional defect mode can be adjusted flexibly. This omnidirectional narrowband defect mode has important implications in the fields of sensors, detectors, and filters.

Transmissible topological edge states based on Su–Schrieffer–Heeger photonic crystals with defect cavities

Abstract Topological photonic crystals have great potential in the application of on-chip integrated optical communication devices. Here, we successfully construct the on-chip transmissible topological edge states using one-dimensional Su–Schrieffer–Heeger (SSH) photonic crystals with defect cavities on silicon-on-insulator slab. Different coupling strengths between the lateral modes and diagonal modes in photonic crystal defect cavities are used to construct the SSH model. Furthermore, two photonic SSH-cavity configurations, called α and β configurations, are designed to demonstrate the topological edge states. Leveraging the capabilities of photonic crystal transverse electric modes with on-chip transmission, we introduced a waveguide to excite a boundary defect cavity and found that the transmission peak of light, corresponding to the topological edge state, can be received in another boundary defect cavity, which is caused by the tunnel effect. Moreover, the position of this peak experiences a blue shift as the defect cavity size increases. Therefore, by tuning the size of the SSH defect cavity, on-chip wavelength division multiplexing function can be achieved, which is demonstrated in experiments. The ultrafast response time of one operation can be less than 20 fs. This work harmonizes the simplicity of one-dimensional SSH model with the transmissibility of two-dimensional photonic crystals, realizing transmissible on-chip zero-dimensional topological edge states. Since transmission peaks are highly sensitive to defect cavity size, this configuration can also serve as a wavelength sensor and a reconfigurable optical device, which is of substantial practical value to on-chip applications of topological photonics.

The Determination of the Sensitivity of Refractive Index Sensors

A new approach to determining the sensitivity of refractive index sensors is proposed. It has been shown that relative and absolute sensitivity show different results, and also, for the first time, it is demonstrated that relative sensitivity has advantages over absolute sensitivity. In addition, the influence of the relative width of the photonic band gap and the difference in the refractive indices of the layers on the sensitivity are examined and the corresponding dependences of these parameters are obtained. We propose these parameters as a convenient tool for optimizing the sensitivity of sensors based on defective photonic crystals. Finally, results are obtained regarding the behavior of the defect mode at the center of the photonic band gap of one-dimensional photonic crystals.

Data analysis on the three defect wavelengths of a MoS2-based defective photonic crystal using machine learning

To reduce the dimension of optoelectronic devices, recently, Molybdenum disulfide (MoS2) monolayers with direct bandgap in the visible range are widely used in designing a variety of photonic devices. In these applications, adjustability of the working wavelength and bandwidth with optimum absorption value plays an important role. This work proposes a symmetric defective photonic crystal with three defects containing MoS2 monolayer to achieve triple narrowband defect modes with wavelength adjustability throughout the Photonic Band Gap (PBG) region, 560 to 680 nm. Within one of our designs remarkable FWHM approximately equal to 5 nm with absorption values higher than 90% for the first and third defect modes are achieved. The impacts of varying structural parameters on absorption value and wavelength of defect modes are investigated. Due to the multiplicity of structural parameters which results in data plurality, the optical properties of the structure are also predicted by machine learning techniques to assort the achieved data. Multiple Linear Regression (MLR) modeling is used to predict the absorption and wavelength of defect modes for four datasets based on various permutations of structural variables. The machine learning modeling results are highly accurate due to the obtained R2-score and cross-validation score values higher than 90%.

A temperature sensor based on Si/PS/SiO2 photonic crystals

The present research deals with the extremely sensitive temperature-sensing capabilities of defective one-dimensional photonic crystal structures (Si/PS/SiO2). The proposed structure is realized by putting a defective layer of material silicon Dioxide (SiO2) in the middle of a structure consisting of alternating layers of silicon (Si) and porous silica (PS). The transfer matrix method has been employed to examine the transmission characteristics of the proposed defective one-dimensional photonic crystal in addition to MATLAB software. The transmission spectra of the proposed structure in the visible light domain are computed throughout a temperature range of 25–900 °C, and we study the thermal properties related to the defective mode. Additionally, the impacts of changing the defect layer's thickness are examined. Due to the effects of thermal expansion and the thermo-optical coefficient, the defect mode varies significantly as the temperature increases. Our investigation shows that the proposed structure considerably impacts the transmission intensity of the defective mode. The theoretically obtained numeric values of the quality factor and sensitivity are 2216.6 and 0.085 nm/°C, respectively. The challenges presented by conventional temperature sensors could be overcome by the suggested defective photonic crystal sensor. These results are enough to support our claim that the present design can be used as an ultra-sensitive temperature sensor.

Interference logic elements based on a Y-shaped defect photonic crystal

We discuss prospects of using a photonic crystal with a Y-shaped defect for the implementation of interference logic elements. By the numerical modeling we demonstrate that such photonic-crystal elements can implement logic operations such as "AND", "OR", "XOR" and "NOR". Particular attention is given to demonstrating the possibility of cascading such elements with the aim of synthesizing composite interference logic elements capable of implementing other logic operations.

Investigation into Oxidation Width of AlGaOx Cladding Layer for Circular Defect in 2D Photonic Crystal Laser

A circular defect in 2D photonic crystal (CirD) lasers is developed, which has the potential to achieve a target communication density of 10 Pbps cm−2 for intrachip optical communications by vertical current injection. The AlGaOx cladding layer's oxidation width strongly influences the device's light confinement and electronic resistance. Herein, samples with different oxidation widths are fabricated and the relationship between threshold power and oxidation width through photoexcitation is revealed. The optimal range of the oxidation width is found to be 349–439 nm, which can ensure low electronic resistance and low threshold power.