Deep Learning-based Fault Diagnosis Methods Research Articles

An interpretable multiscale lifting wavelet contrast network for planetary gearbox fault diagnosis with small samples

Previous deep learning-based fault diagnosis methods for planetary gearbox require numerous training samples and lack the necessary interpretability. Aiming at the problems of insufficient interpretability of deep models and the absence of feature mining capability with small samples, this study presents an interpretable multiscale lifting wavelet contrast network for planetary gearbox fault diagnosis. First, an interpretable multiscale lifting wavelet network is designed to achieve comprehensive and credible features mining from fault signals. Secondly, an interactive channel attention mechanism is constructed to choose feature maps with different frequency components. It can further confirm the interpretability of the lifting wavelet layer while improving the accuracy of the model. Finally, a time-frequency contrast loss is designed to simultaneously optimizing the distribution of time-frequency domain features. The effectiveness and interpretability of the model are analyzed through various visualization approaches. Experimental results on two planetary gearbox datasets indicate that our method is an interpretable and effective fault recognition method with small samples, and it holds a promising future for engineering applications.

A model-data combination driven digital twin model for few samples fault diagnosis of rolling bearings

Abstract Deep learning-based fault diagnosis methods for rolling bearings are widely utilized due to their high accuracy. However, they have limitations under conditions with few samples. To address this problem, a model-data combination driven digital twin model (MDCDT) is proposed in this work for fault diagnosis with few samples of rolling bearings. The simulation signals generated by different fault dynamic models of rolling bearings and the measured signals are mixed through MDCDT. The MDCDT generates virtual signals to bridge the gap between the simulated signals and the measured signals by combining their respective advantages. This paper also proposes image coding method based on the Markov transfer matrix (MTMIC) to convert one-dimensional vibration signals into two-dimensional images with both frequency domain information and time domain information, making it easier to extract fault features in neural network training. In the end, the developed MDCDT was evaluated using real rolling bearing data. Experiments show that the MDCDT can generate virtual data for fault diagnosis, and the fault diagnosis accuracy is significantly improved.

Learning to generalize with latent embedding optimization for few- and zero-shot cross domain fault diagnosis

Ensuring the safety and reliability of rotating machinery in modern industrial production and intelligent manufacturing is of paramount importance. While deep learning-based fault diagnosis methods offer promise, the scarcity of fault samples and the variations in distributions between training and test data due to variable working conditions make it difficult for these methods to be applied in industrial scenarios. To surmount these obstacles, we present a novel solution: learning to generalize with latent embedding optimization. Our proposed method, tailored for few-shot and zero-shot cross domain fault diagnosis, shows promise in addressing the industrial fault diagnosis problems under small samples and various working condition. The proposed method builds upon the latent embedding optimization algorithm which capitalizes on the essence of meta-learning, effectively addressing few-shot challenges. Additionally, we harness an efficient pretraining model, enhancing feature extraction and domain adaptation, effectively handling the scarcity of fault data. In tackling the cross domain issue, we introduce an innovative meta-task organization and amplify the episode training strategy within meta-learning. These enhancements empower the model to develop the ability to generalize effectively. The proposed approach is substantiated through comprehensive case studies in bearing and gearbox fault diagnosis. The results demonstrate its exceptional efficacy in both few-shot and zero-shot cross domain fault diagnosis scenarios.

Intelligent fault diagnosis of storage stacking machinery under variable working conditions using attention-based adaptive multimodal feature fusion networks

Due to the harsh working environment of storage stacking machinery, the fault information of important components is significantly complex, which leads to the problem of low classification accuracy and high computational complexity of existing deep learning-based fault diagnosis methods. To alleviate the problem, this paper presents a novel architecture named attention-based adaptive multimodal feature fusion networks for intelligent fault diagnosis of storage stacking machinery, which is aimed at improving the diagnostic precision and robustness of feature fusion network and learning the broader feature representation. Firstly, the long short-term memory layer is introduced to extract the feature information of multiple time steps to improve the self-extraction ability of multi-temporal features. Then, the maximum temporal feature fusion module is utilized to highlight the recognizability of deep fusion features. Finally, a residual layer with spanning connections is added to increase the utilization and characterization capability of deep fusion features. Experimental results demonstrate the effectiveness and superiority of the proposed method in intelligent fault diagnosis of storage stacking machinery under variable working conditions compared with some state-of-the-art deep learning-based methodologies.

A Deep Learning-Based Fault Diagnosis Method for Flexible Converter Valve Equipment

A Deep Learning-Based Fault Diagnosis Method for Flexible Converter Valve Equipment

Rolling bearing intelligent fault diagnosis towards variable speed and imbalanced samples using multiscale dynamic supervised contrast learning

Deep learning-based fault diagnosis methods have already attained remarkable achievements in this field. However, rolling bearing frequently operates under variable speed conditions, and the number of healthy samples collected is often significantly larger than that of failure samples. In this paper, a multiscale dynamic supervised contrast learning (MDSupCon) framework is proposed. First, a multiscale adaptive feature extraction network is designed as the backbone, which utilizes multiple convolutional kernels to enhance feature extraction capabilities under variable speed conditions, and the branch attention mechanism is incorporated to adaptively adjust the weights of various scale branches. Second, the joint channel-space attention mechanism is constructed to enhance the importance of critical features while reducing redundant information, thereby improving fault identification accuracy and interpretability. Third, the dynamic supervised contrast loss function is designed to assign dynamic compensation factors to samples of various categories according to the training results, which reduces the impact of easily classified samples and enhances the contribution of hard-to-classify samples in imbalanced scenarios. Additionally, a dynamic cross-entropy loss is designed to train the backbone and the classifiers. The MDSupCon has achieved superior results of 89.49% and 92.15% on two bearing datasets with an imbalance ratio of 20:1 and variable speeds.

Chemical Process Fault Diagnosis Method Based on Deep Learning

To address the problem that the traditional fault diagnosis method for chemical processes under big data relies too much on expert experience and fault features are difficult to distinguish, a deep learning-based fault diagnosis method is proposed, which combines convolutional neural network (CNN), long and short-term memory (LSTM) and attention mechanism (AM). In this method, the spatial sequence features of the input signal are extracted by the CNN adaptively, while the LSTM extracts the time-series features of the signal. Finally, the model performance is enhanced by introducing the attention mechanism and using the SoftMax layer as a classifier for fault diagnosis, so that the model can notice the important features of the faults with the interference of noise. Simulation validation of the method in this paper is performed using the TE chemical process data set, and it is demonstrated that the method can be used for chemical process fault diagnosis studies. Finally, compared with other fault diagnosis methods, the method is more accurate and has certain superiority.

Structural discrepancy and domain adversarial fusion network for cross-domain fault diagnosis

The current deep learning-based fault diagnosis methods have achieved excellent classification performance under supervised training, but the existence of domain discrepancy under different working conditions will greatly affect data relationship mining and fault diagnosis accuracy. Graph convolutional network (GCN) with topological structured relationships is excellent in solving these issues. In this paper, structural discrepancy and domain adversarial fusion network (SDDAFN) is proposed to learn deep high-dimensional features and eliminate distribution discrepancy across different domains. In data structure construction, the high-dimensional mapping features are first extracted accurately from the input raw signals by a feature encoder, then the output of encoder is converted into an instance graph through graph construction layer (GCL) for the convenient modeling by multi-channel kernel GCN (MCK-GCN). In network optimization, the classification loss function is introduced to optimize the discrimination boundaries of different fault types, and the integrated loss function based on structural discrepancy and domain adversarial are jointly adopted to minimize the domain distribution discrepancy. Experimental cases show the proposed method outperforms the state-of-the-art methods.

A Novel Unsupervised Clustering and Domain Adaptation Framework for Rotating Machinery Fault Diagnosis

Deep learning-based fault diagnosis methods require a large number of labeled datasets. However, considering the changing operating conditions, it is impractical to obtain labeled datasets for all cases. Therefore, this study proposes a new unsupervised clustering and domain adaptation framework to circumvent data deficiency and domain issues. The proposed framework comprises two steps: unsupervised clustering and domain adaptation. In the unsupervised clustering, an expectation-maximization adversarial autoencoder, which combines an expectation-maximization algorithm with an adversarial autoencoder, is used for feature extraction and subspace mapping. Subsequently, the mapped features are clustered using a Gaussian mixture model. In the domain adaptation, a domain synchronization that is based on the symmetric Kullback-Leibler divergence metric is used to infer the relationship between the source and target domain clusters. The experiments on two rolling-element-bearing datasets validate the effectiveness of our method. Specifically, our method performs domain adaptation without retraining, which is promising for real industrial applications.

Bearing Fault Diagnosis of WDCNN-LSTM in Siamese Network

In this paper, a Siamese network-based WDCNN + LSTM model was used to diagnose bearing faults using a few shot learning algorithm. Recently, deep learning-based fault diagnosis methods have achieved good results in equipment fault diagnosis. However, there are still limitations in the existing research. The biggest problem is that a large number of training samples are required to train a deep learning model. However, manufacturing sites are complex, and it is not easy to intentionally create equipment defects. Furthermore, it is impossible to obtain enough training samples for all failure types under all working conditions. Therefore, in this study, we propose a few-shot learning algorithm that can effectively learn with limited data. A Few shot learning algorithm and Siamese network based WDCNN + LSTM model bearing fault diagnosis, which can effectively learn with limited data, is proposed in this study.

Network lightweight method based on knowledge distillation is applied to RV reducer fault diagnosis

As a core component of industrial robots, the RV reducer directly affects the normal operation of the robot, so it is of great significance to monitor its status and diagnose faults. In the field of fault diagnosis, intelligent diagnosis methods based on deep learning have shown great advantages in accuracy and efficiency. However, as the network depth and scale increase, the exponentially growing model computation and parameter amounts require higher hardware requirements for computers, making it difficult to deploy on embedded platforms with limited computing resources. This makes it difficult for deep learning-based fault diagnosis methods to be applied in practical industrial settings that emphasize real-time performance, portability, and accuracy. This paper proposes a network lightweight method based on knowledge distillation (KD). Using the two-dimensional time–frequency map of vibration signals as the model input, the improved MobileNet-V3 network is used as the teacher network, and the simplified convolutional neural network is used as the student network (SN). The method of KD is applied to condense the knowledge and transfer it to the SN. The proposed method is validated using an RV reducer fault simulation experiment platform, and the results show that the proposed method reduces computation and parameter amounts by about 170 times at an accuracy rate of 94.37%, and run time is shortened by nearly one-third, and a generalization verification was conducted using the rotating mechanical fault simulation experiment platform. The models were also deployed on embedded devices to verify that the method proposed in this paper effectively reduces the deep learning network model’s demand for hardware resources of the operating environment. This provides an effective reference for deploying and implementing deep learning-based fault diagnosis on embedded systems with lower hardware configurations.

A Fault Diagnosis Method Based on a Rainbow Recursive Plot and Deep Convolutional Neural Networks

In previous deep learning-based fault diagnosis methods for rotating machinery, the method of directly feeding one-dimensional data into convolutional neural networks can lead to the loss of important fault features. To address the problem, a novel rotating machinery fault diagnosis model based on a rainbow recursive plot (RRP) is proposed. Our main innovation and contributions are: First, a RRP is proposed to convert the one-dimensional vibration signal from the rotating machinery into a two-dimensional color image, facilitating the capturing of more significant fault information. Second, a new CNN based on LeNet-5 is devised, which extracts a feature that describes substantial fault information from the converted two-dimensional color image, thus performing fault diagnosis recognition accurately. The public rolling bearing datasets and the online fault diagnosis platform are adopted to verify proposed method performance. Experiments on public datasets show that the proposed method can improve the accurate rate of recognition to 97.86%. More importantly, online experiment on the self-made fault diagnosis platform demonstrates that our approach achieves the best comprehensive performance in terms of recognition speed and accuracy compared to mainstream algorithms.

A Compressed Unsupervised Deep Domain Adaptation Model for Efficient Cross-Domain Fault Diagnosis

As one of the most important artificial intelligence-enabled industrial applications, fault diagnosis is vital in the safe, stable and reliable operation of the equipment. Many existing deep learning-based fault diagnosis methods assume that the distribution of training data is the same as that of testing data, which is almost impossible in practical industrial applications. In addition, most of these fault diagnosis methods are generally memory intensive and computationally expensive. A compressed unsupervised deep domain adaption model-based fault diagnosis method is proposed to overcome the above-mentioned two issues. Firstly, a standard unsupervised domain adaption model is designed to extract the features of training data and testing data, respectively. Then, the maximum mean discrepancy term is introduced to minimize the discrepancy between the extracted features of them. Next, the standard model is compressed through iteratively pruning the redundant convolutional channels. Finally, the obtained compressed model is applied to diagnose faults. The performance of the proposed method is verified on the Case Western Reserve University bearing dataset. Experimental results show that the compressed model can significantly reduce the memory occupation, computational cost and inference time compared with the standard model, but still achieve comparable or even better accuracy on ten transfer diagnostic tasks.

A novel hierarchical training architecture for Siamese Neural Network based fault diagnosis method under small sample

Although current deep learning-based fault diagnosis methods have made great progress, the accuracy of these models is usually attained based on many balanced training samples, which is quite difficult to meet in real industrial scenarios. In this paper, a Siamese Neural Network (SNN) based fault diagnosis method under small sample conditions is proposed and a novel hierarchical training architecture is designed to train model efficiently. Through pre-training and secondary training of the feature extractor, the SNN training stagnation problem caused by input data is addressed, which fully exploits the deep features of small sample data. Then, a classifier is added to construct the final fault diagnosis network, which improves the diagnosis speed under large test samples, and realizes accurate and efficient fault diagnosis under small sample conditions. Finally, experiments using real rotating machinery datasets show the feasibility and accuracy of the proposed method under small sample.

A novel lightweight relation network for cross-domain few-shot fault diagnosis

Recently, the progress of intelligent fault diagnosis shows deep learning-based methods with large data have achieved great success. Nevertheless, in engineering practice, limited labelled data, and various working conditions seriously hinder the widespread application of most deep learning-based fault diagnosis methods. Besides, increasingly complex networks for obtaining powerful feature representation are difficult to deploy in the industry, due to the problem of model efficiency. To address these problems, a novel lightweight relation network (NLRN) is proposed in this paper. The lightweight encoder module in NLRN achieves a strong feature extraction capability with fewer parameters, which means higher model efficiency. Furthermore, a calibration method based on semi-supervised learning is designed to alleviate domain shift due to cross-domain problems, as well as to improve the unreliability of relation networks in few-shot problems. We choose rolling bearings as the research object and three bearing datasets are utilized to demonstrate the effectiveness of the proposed models. The results of our experiment indicate that NLRN has an aptitude to deal with cross-domain few-shot problems. In comparison with other approaches, the proposed method is superior for fault diagnosis under various working conditions with few samples.

Attention-based deep meta-transfer learning for few-shot fine-grained fault diagnosis

Deep learning-based fault diagnosis methods have made tremendous progress in recent years; however, most of these methods are coarse grained and data demanding that cannot find the root causes of mechanical system failures at a finer granularity with limited fault data. Therefore, in this study, we first investigate the few-shot fine-grained fault diagnosis (FSFGFD) problem, with the aim of identifying novel fine-grained faults under different working conditions using only few samples from each class. To address the difficulties of fine-grained fault feature extraction and poor model generalization to unseen few-shot faults in FSFGFD tasks, a novel attention-based deep meta-transfer learning (ADMTL) method is proposed. First, the failure modes under different working conditions are considered as fine-grained faults, and their raw signals are transformed into time–frequency images. Based on this, an attention mechanism is introduced to guide the feature extractor of the ADMTL on what information to learn. The ADMTL then follows a three-stage learning process of pre-training, meta-transfer, and meta-adaptation to achieve fast adaptation to new fine-grained faults using a priori knowledge gained from known faults. Furthermore, a parameter modulation strategy is employed to adaptively update the pre-trained network during the meta-transfer process. The comprehensive experimental results of three case studies demonstrate the superiority of our method over state-of-the-art methods. The proposed method achieves excellent performance with an average accuracy of 99.08%, 95.86%, and 77.74% for FSFGFD tasks when performing meta-transfer within the same machine and between different machines, respectively.

Multi-Scale Recursive Semi-Supervised Deep Learning Fault Diagnosis Method with Attention Gate

The efficiency of deep learning-based fault diagnosis methods for bearings is affected by the sample size of the labeled data, which might be insufficient in the engineering field. Self-training is a commonly used semi-supervised method, which is usually limited by the accuracy of features for unlabeled data screening. It is significant to design an efficient training mechanism to extract accurate features and a novel feature fusion mechanism to ensure that the fused feature is capable of screening. A novel training mechanism of multi-scale recursion (MRAE) is designed for Autoencoder in this article, which can be used for accurate feature extraction with a small amount of labeled data. An attention gate-based fusion mechanism was constructed to make full use of all useful features in the sense that it can incorporate distinguishing features on different scales. Utilizing large numbers of unlabeled data, the proposed multi-scale recursive semi-supervised deep learning fault diagnosis method with attention gate (MRAE-AG) can efficiently improve the fault diagnosis performance of DNNs trained by a small number of labeled data. A benchmark dataset from the Case Western Reserve University bearing data center was used to validate this novel method which shows that 7.76% accuracy improvement can be achieved in the case when only 10 labeled samples was available for supervised training of the DNN-based fault diagnosis model.

Bearing Fault Detection based on Few-Shot Learning in Siamese Network

This paper executes bearing fault diagnosis with little data through few-shot learning. Recently, deep learning-based fault diagnosis methods have achieved promising results. In previous studies, fault diagnosis requires numerous training samples. However, in manufacturing, it is not possible to obtain sufficient training samples for all failure types under all working conditions. In this work, we propose a Few shot learning-based rolling bearing fault diagnosis that can effectively learn with limited data. Our model is based on the siamese network, which learns to use the same or different class of sample pairs.

Fault Diagnosis Method for Bearing Based on Digital Twin

The bearing is an essential component of rotating machinery, as its reliability and running state have a direct impact on the machinery’s performance. Considering that deep learning-based fault diagnosis methods for bearing require a large amount of labelled sample data, a novel fault diagnosis framework based on digital twin is proposed. In the case of fault data available, self-organizing maps with minimum quantization error and support vector machine are employed to analyze the data. Where fault data is unavailable, a bearing digital twin model is first constructed to simulate the data, and the convolutional neural network combined with transfer learning is utilized to diagnose the bearing faults. Then, the law of bearing performance degradation is investigated. The effectiveness of the proposed method is verified using bearing vibration data.

Recent advances in the application of deep learning for fault diagnosis of rotating machinery using vibration signals

Vibration measurement and monitoring are essential in a wide variety of applications. Vibration measurements are critical for diagnosing industrial machinery malfunctions because they provide information about the condition of the rotating equipment. Vibration analysis is considered the most effective method for predictive maintenance because it is used to troubleshoot instantaneous faults as well as periodic maintenance. Numerous studies conducted in this vein have been published in a variety of outlets. This review documents data-driven and recently published deep learning techniques for vibration-based condition monitoring. Numerous studies were obtained from two reputable indexing databases, Web of Science and Scopus. Following a thorough review, 59 studies were selected for synthesis. The selected studies are then systematically discussed to provide researchers with an in-depth view of deep learning-based fault diagnosis methods based on vibration signals. Additionally, a few remarks regarding future research directions are made, including graph-based neural networks, physics-informed ML, and a transformer convolutional network-based fault diagnosis method.