Decrease In Operative Time Research Articles

Operative Time, Cost, and Union Rate of Power Rasp Joint Preparation Versus Traditional Preparation in Arthrodesis of the Foot and Rearfoot

Time spent in the operating room is valuable to both surgeons and patients. One of the biggest rate-limiting factors when it comes to arthrodesis procedures of the foot and ankle is cartilage removal and joint preparation. Power instrumentation in joint preparation provides an avenue to decrease joint preparation time, thus decreasing operating room time and costs. Arthrodesis of 47 joints (n) from 27 patients were included. Power rasp joint preparation in 26 joints was compared to traditional osteotome and curette joint preparation in 21 joints in both time (seconds), cost (total operating room time cost per minute), and union rate. The overall mean joint preparation time using power rasp for the subtalar joint was 268.3 seconds, talonavicular joint 212.3 seconds, calcaneocuboid joint 142.6 seconds, 1st TMT 107.2 seconds. Mean joint preparation time using traditional method for subtalar joint 509.8 seconds, talonavicular joint 393.0 seconds, calcaneocuboid joint 400.0 seconds, 1st TMT 319.6 seconds. Mean cost of joint preparation using power rasp for subtalar joint $165.47, talonavicular joint $130.89, calcaneocuboid joint $87.94, 1st TMT $66.11. Mean cost of joint preparation using traditional techniques for subtalar joint $314.34, talonavicular joint $242.35, calcaneocuboid joint $246.67, 1st TMT $197.33. Overall union rate was 98% (1 asymptomatic non-union). Increasing efficiency in the operating room is vital to every surgeon's practice. Power rasp joint preparation is a viable option to increase efficiency and decrease operative time, this study shows no statistically significant differences in union rate, with comparable rates to existing literature.

Transferring Surgical Expertise: Analyzing the Learning Curve of Robotic Cardiac Surgery Operative Time Reduction When Surgeon Moves from One Experienced Center to Another.

Robotically assisted cardiac surgery is performed in a team setting and is well known to be associated with learning curves. Surgeon and operative team learning curves are distinct entities, with total operative time representing the entire operative team (surgery, anesthesia, nursing, and perfusion) and cross-clamp time representing mainly the surgical team. Little is known about how a team learning curve evolves when an experienced surgeon transitions from one surgical center to another. This study investigates the dynamics of the team learning curve expressed as total operative time in the case of a surgeon with previous experience transitioning to a new team. A retrospective analysis was conducted on robotic cardiac surgeries performed by a surgeon who transitioned from one experienced surgical center to another. Operative time data were collected and categorized to assess the evolution of the learning curve. Statistical analysis, including learning curve modeling and linear regression analysis, was used to evaluate changes in total time in the operating room per case. 103 cases were included in Weill Cornell Medicine (2019-2023). The median patient age was 63 years, 68% were males, 90.3% of cases were repaired for degenerative mitral valve disease, and the median body mass index was 23.87. Operative time (ORT) decreased from a median of 5.00 h [95%CI: 4.76, 6.00] in the first 30 cases to 4.83 [95%CI: 4.10, 5.27] thereafter, with the apparent curve plateauing indicative of the adaptation period to the new surgical environment (p = 0.01). Subgroup analysis among mitral cases (n = 93) showed a decrease in ORT from 5.00 [95%CI: 4.71, 5.98] in the first 26 cases to 4.83 [95%CI: 4.14, 5.30] (p = 0.045). There was no difference between the initial 30 cases and subsequent cases regarding cardiopulmonary bypass time, myocardial ischemia time, reoperation for bleeding, prolonged ventilation, reintubation, renal failure, need for an intra-aortic balloon pump, readmission to the ICU, reoperation for valvular dysfunction within 30 days, pneumonia, and deep venous thrombosis. Multivariate significant predictors of longer operative time were the first 30 cases, resection-based repairs, and MAZE as a concomitant procedure. Total operative time can be expected to decrease after about 30 cases when an experienced robotic surgeon moves between centers. Complications and cross-clamp times are less susceptible to a learning curve phenomenon in such a circumstance, as these depend primarily on the operating surgeon's level of experience. Understanding these dynamics can inform the planning and management of surgical transitions, ensuring optimal patient care and continued improvement in surgical outcomes.

Arthroscopic Anterior Cruciate Ligament Reconstruction Learning Curve: Analysis of Operating Time and Clinical Outcomes.

Technical proficiency for arthroscopic anterior cruciate ligament reconstruction (ACLR) is complex and requires learning and practice. Achieving an appropriate level of competency with this surgery is important for patient safety and satisfactory surgical outcomes. There is limited literature about the learning curve in ACLR in Africa. This study aimed to demonstrate the learning curve associated with ACLR. This retrospective study on arthroscopic ACLR was conducted between January 2020 and June 2023 with a minimum of 12 months follow-up. The primary outcome measure was operation time, whereas the secondary outcome measures were functional outcome and postoperative complications. One hundred fifty-nine ACLR met the inclusion criteria and were analysed. The mean age of the patients was 31.47 ± 9.50 years. There were 148 (93.1%) males and 11 (6.9%) females. The median operation time was 50 min (45-190 min). There was progressively decreasing operation time with increasing number of cases done until after the first 19 cases. The mean operating time for the first 19 cases was 143.89 ± 32.84 min, whereas the mean operating time for the later 140 cases was 53.81 ± 9.72 min (P = 0.000). The operation time for arthroscopic ACLR progressively decreased until after the first 19 cases. There was, however, no significant difference in the clinical outcome between the cases done during the learning curve and those done at proficiency.

Utilization of Imaging Modalities in the Diagnosis of Melanoma: A Scoping Review.

Melanomas arise de novo or in the context of a precursor lesion. Lesions typically grow radially and then undergo a vertical growth phase proceeding to local invasion and metastasis. This review describes the utility of different imaging modalities in diagnosis and melanocytic lesion monitoring. A literature search was performed in November 2023 utilizing EMBASE, Medline, and PubMed. The PRISMA diagram demonstrates the review process. Reflectance confocal microscopy (RCM) utilizes near-infrared light to help diagnose dermatologic lesions. RCMwas found to demonstrate nearly two times the positive predictive value compared to dermoscopy. The introduction of the Berlin Ultrasound (US) Morphology Criteria permitted a 65-80% improvement in diagnostic sensitivity. US with fine-needle aspiration cytology (FNAC) accurately predicts the necessity for sentinel lymph node biopsy and lymphadenectomy, sparing patients with metastasis and prompting biopsy for equivocal lesions. Single-photon emission computed tomography/computed tomography (SPECT/CT) is an adjunctive tool to anatomically and functionally assess lymphatic invasion. SPECT/CT improves the detection of sentinel nodes while decreasing operating time and improving cosmetic outcomes. 18F-fluorodeoxyglucose(18F-FDG) positron emission tomography/computed tomography (PET/CT) with small voxel reconstruction demonstrated increased specificity and sensitivity for detecting in-transit metastases of melanomas, specifically in the limbs. Dermoscopy allows providers to cost-effectively recognize common lesion patterns. Multiphoton microscopy assigns a weight-based score based on malignant features. Optical coherence angiography captures images of vessels to help diagnose equivocal lesions. Utilization of imaging techniques may increase diagnostic accuracy, reduce unnecessary procedures, and help guide treatment plans. Additional research is needed to further characterize the utility of these techniques in order to improve the diagnosis and treatment of melanomas.

Long-term outcomes of staged iliofemoral endoconduits prior to complex endovascular aortic aneurysm repair

ObjectiveAdverse iliofemoral anatomy may preclude complex endovascular aortic aneurysm repair (EVAR). In our practice, staged iliofemoral endoconduits (ECs) are planned prior to complex EVAR to improve vascular access and decrease operative time while allowing the stented vessel to heal. This study describes the long-term results of iliofemoral ECs prior to complex EVAR. MethodsBetween 2012 and 2023, 59 patients (44% male; median age, 75 ± 6 years) underwent ECs before complex EVAR using self-expanding covered stents (Viabahn). For common femoral artery (CFA) disease, ECs were delivered percutaneously from contralateral femoral access and extended into the CFA to preserve the future access site for stent graft delivery. Internal iliac artery patency was maintained when feasible. During complex EVAR, the EC extended into the CFA was directly accessed and sequentially dilated until it could accommodate the endograft. Technical success was defined as successful access, closure, and delivery of the endograft during complex EVAR. Endpoints were vascular injury or EC disruption, secondary interventions, and EC patency. ResultsUnilateral EC was performed in 45 patients (76%). ECs were extended into the CFA in 21 patients (35%). Median diameters of the native common iliac, external iliac, and CFA were 7 mm (interquartile range [IQR], 6-8 mm), 6 mm (IQR, 5-7 mm), and 6 mm (IQR, 6-7 mm), respectively. Internal iliac artery was inadvertently excluded in 10 patients (17%). Six patients (10%) had an intraoperative vascular injury during the EC procedure, and six patients (10%) had EC disruption during complex EVAR, including five EC collapses requiring re-stenting and one EC fracture requiring open cut-down and reconstruction with patch angioplasty. In 23 patients (39%), 22 Fr OD devices were used; 20 Fr were used in 22 patients (37%), and 18 Fr in 14 patients (24%). Technical success for accessing EC was 89%. There was no difference in major adverse events at 30 days between the iliac ECs and iliofemoral ECs. Primary patency by Kaplan-Meier estimates at 1, 3, and 5 years were 97.5%, 89%, and 82%, respectively. There was no difference in primary patency between iliac and iliofemoral ECs. Six secondary interventions (10%) were required. The mean follow-up was 34 ± 27 months; no limb loss or amputations occurred during the follow-up. ConclusionsECs improve vascular access, and their use prior to complex EVAR is associated with low rates of vascular injury, high technical success, and optimal long-term patency. Complex EVAR procedures can be performed percutaneously by accessing the EC directly under ultrasound guidance and using sequential dilation to avoid EC disruption.

Synthesis and characterization of hierarchical suspended carbon fiber structures decorated with carbon nanotubes

Carbon nanotubes (CNTs) and carbon microfibers (CMFs) have received significant attention due to their exceptional mechanical and electrical properties, which make them promising materials for various applications. This study introduces a novel approach to integrate CNTs and CMFs into a unified architecture by simultaneously conducting pyrolysis and chemical vapor deposition (CVD). The localized CVD of CNTs on suspended CMFs was achieved by utilizing Fe–Co nanoparticles (NPs) embedded in polyacrylonitrile (PAN) fibers as catalysts. Scanning electron microscopy and elemental analysis confirmed the formation of needle-like carbon structures on the pyrolyzed fiber surface, where carbon gases released from the pyrolyzing PAN fiber acted as the carbon source for the localized CVD. The incorporation of an additional carbon source, such as camphor vapor, significantly enhanced the growth and density of CNTs on the CMF. Various characterization techniques, including transmission electron microscopy, X-ray diffraction, Raman spectroscopy, and Atomic Force Microscopy, were employed to analyse the properties of the synthesized materials. The substantial increase in electrical conductivity upon incorporating CNTs highlights their positive influence on electrical properties and defect reduction. These characterization results highlight the potential applications of the fabricated structures in various fields, including sensors, lithium-ion electrodes, and microfabrication. In addition, the economic advantages of optimizing the process by integrating CVD with pyrolysis were assessed, revealing decreased operation time, lower energy consumption, and reduced chemical costs in comparison to conventional methods involving multiple intermediate processing steps.Graphical

Clinical and Radiologic Analysis of Minimally Invasive Anterior-Posterior Combined Surgery for Adult Spinal Deformity: Comparison of Oblique Lateral Interbody Fusion at L5/S1 (OLIF51) versus Transforaminal Interbody Fusion.

Background and Objectives: Although adult spinal deformity (ASD) surgery brought about improvement in the quality of life of patients, it is accompanied by high invasiveness and several complications. Specifically, mechanical complications of rod fracture, instrumentation failures, and pseudarthrosis are still unsolved issues. To better improve these problems, oblique lateral interbody fusion at L5/S1 (OLIF51) was introduced in 2015 at my institution. The objective of this study was to compare the clinical and radiologic outcomes of anterior-posterior combined surgery for ASD between the use of OLIF51 and transforaminal interbody fusion (TLIF) at L5/S1. Materials and Methods: A total of 117 ASD patients received anterior-posterior correction surgeries either with the use of OLIF51 (35 patients) or L5/S1 TLIF (82 patients). In both groups, L1-5 OLIF and minimally invasive posterior procedures of hybrid or circumferential MIS were employed. The sagittal and coronal spinal alignment and spino-pelvic parameters were recorded preoperatively and at follow-up. The quality-of-life parameters and visual analogue scale were evaluated, as well as surgical complications at follow-up. Results: The average follow-up period was thirty months (13-84). The number of average fused segments was eight (4-12). The operation time and estimated blood loss were significantly lower in OLIF51 than in TLIF. The PI-LL mismatch, LLL, L5/S1 segmental lordosis, and L5 coronal tilt were significantly better in OLIF51 than TLIF. The complication rate was statistically equivalent between the two groups. Conclusions: The introduction of OLIF51 for adult spine deformity surgery led to a decrease in operation time and estimated blood loss, as well as improvement in sagittal and coronal correction compared to TLIF. The circumferential MIS correction and fusion with OLIF51 serve as an effective surgical modality which can be applied to many cases of adult spinal deformity.

MENOR TEMPO CIRÚRGICO, MENOS COMPLICAÇÕES E RETORNO MAIS RÁPIDO ÀS ATIVIDADES AO LONGO DA CURVA DE APRENDIZADO PARA A TÉCNICA ARTROSCÓPICA DE LATARJET

ABSTRACT Objetive: This study aims to analyze the learning curves in performing the arthroscopic Latarjet surgery. Methods: This was an observational, retrospective, single-center study. All cases of arthroscopic Latarjet performed in this institution from 2016 to 2021 were included. The data analyzed were surgical time (of the chief surgeon alone and the group of surgeons), complications, and time until the return to sports activities. Technical observations about the learning process were also reported. Results: In total, 50 consecutive cases were included (93% retention of the initial sample identified at the institution). The decrease in surgical time was presented logarithmically and showed a decrease in time both for the individualized analysis of the senior surgeon (r = −0.67, p < 0.001) and for the surgical group (r = −0.476, p < 0.001). Mean operating time (and standard deviation) dropped from 235 minutes (73) in the first 10 cases to 156 minutes (34) for the subsequent cases (p < 0.001). In the first 20 cases, five intercurrences were recorded and three reoperations were performed, whereas subsequent cases presented only one intercurrence requiring surgical intervention (p = 0.032). The median time to return to sport was nine months for the first 20 cases versus six months for subsequent cases (p = 0.001). Conclusion: The learning curve for the arthroscopic Latarjet procedure showed a progressive decrease in operative time, complications, and time to return to sports activities. This suggests that the surgeon developed the necessary skills and confidence to reach a plateau of expertise to perform the surgical procedure. Level of evidence IV, Observational retrospective.

Percutaneous Sacroiliac Screw Fixation: A Modified Screw Insertion Method Using Just 2 Fluoroscopy Views.

Percutaneous sacroiliac screw fixation (PSSF) is a well-defined method of surgery to fix unstable fractures of the pelvic ring with fewer post-surgical complications. However, the complex anatomy of the mentioned area makes PSSF a formidable challenge. The present study aimed to investigate a modified screw insertion method using two views of fluoroscopy X-ray instead of the prior three views to reduce the duration of operations and radiation exposures. The present study was performed on 10 radiopaque plastic pelvic models (including 20 half pelvis) during simulated surgical procedures. Of the 20 screws, 10 were inserted using the conventional method with the navigation of three fluoroscopy views (Group A). The remaining 10 were inserted using the modified method with the navigation of two fluoroscopy views, including just the outlet and inlet views, without taking the lateral view, based on our theory and order of fluoroscopy (Group B). Following screw insertion, the accuracy of screw locations was evaluated using a computed tomography (CT) scan, and the duration of operations and radiation exposures were compared between the two surgery methods at the end of the study. In both groups, nine screws (90%) were located correctly, and one screw (10%) perforated the anterior wall of the first sacral vertebra. The mean±SD of the duration of radiation exposure in groups A and B was 6.1±1.0 min and 4.2±0.1 min, respectively (P=0.01). Moreover, the mean±SD of operation duration in group A was 45.7±5.8 min, but this value in group B was 35.5±4.5, which showed a significant decrease in operation duration (P=0.04).). PSSF using a modified screw insertion method with just two fluoroscopy views not only had similar accuracy to conventional methods but also could decrease operation time and the following radiation exposure.

"Slim-Mesh" Technique for Diastasis Recti Abdominis, Including Obesity-Related Cases.

We operated on a series of mostly obese patients with diastasis recti abdominis using the "Slim-Mesh" technique to repair/reinforce the diastasis and linea alba/recti muscles without plicating and traumatizing them. Additional objectives were to decrease operation time and intra- and postoperative complications. We considered T1 cases diastasis after pregnancy and T2 cases obesity (BMI ≥ 30 mg/kg2); D1, D2, and D3 when the diastasis measured 2-3, 3-5, and ≥ 5 cm, respectively; H0 and H1 without and concomitant umbilical and/or epigastric hernia, respectively. At our Department, between May 2010 and November 2022, 47 patients with diastasis recti were operated on with the "Slim-Mesh" technique to reinforce/repair the traumatized linea alba/recti muscles, without plicating them. This was a prospective (83%)-retrospective study. We studied 23 males and 24 females. Mean age and BMI was 58 years and 29 kg/m2, respectively. Groups D1, D2, and D3 comprised 6, 23 and 18 patients, respectively; groups T1, T2, H0 and H1 comprised 22, 25, 13 and 34 patients, respectively. Mean operation time for all cases was 100 minutes. Mean length of hospital stay was 2.3 days and follow-up time was 5 years. We had 6 late postoperative complications: 3 hernia recurrences and 3 trocar site hernias. Considering the lack of agreement on the best surgery for diastasis recti abdominis repair, in our experience the "Slim-Mesh" technique is a valid, safe and easy-to-reproduce way to save, repair and reinforce linea alba/recti muscles in diastasis recti patients, including the obese population (53%).

Robotic hernia repair: the trainee "Drag" factor-a single-surgeon 9-year experience.

The use of robotic assisted surgery is increasing but training residents in its use may be associated with increased operative time and cost. The objective of this study is to compare the operative time of robotic incisional/ventral hernia repair (RIVHR) and robotic inguinal hernia repair (RIHR) when performed with and without a resident or fellow trainee. A review of prospectively collected data was performed on all patients who underwent RIVHR and RIHR by a single surgeon over a 9-year period (2014-2023). Study variables included presence of trainee (resident or fellow), procedure time, console time, and recurrent hernia. Primary outcomes include procedure time and console time. A total of 402 surgeries were included for analysis. Residents assisted in 190 (47%) of the procedures, while fellows assisted in 97 (24%), and 115 (29%) were performed without a trainee. Median (IQR) console times in RIVHR assisted by fellows was 102 (72-145) minutes, compared to 90 (71-129) minutes among surgeries assisted by residents and 65 (52-82) minutes among surgeries performed without a trainee (p < 0.0001), a similar trend was observed for RIHR. The duration of hernia repair assisted by trainees was significantly longer than surgeries performed without a trainee. Operative time for RIVHR and RIHR is significantly lower when performed without a trainee. However, RIHR assisted by residents showed a consistent decrease in operative time over the 9-year period.

The learning curve for transanal hemorrhoidal dearterialization with mucopexy. Experience of 459 cases

Aim: to evaluate learning curve for transanal hemorrhoidal dearterialization (THD) with mucopexy for chronic hemorrhoids II-IV stage.Patients and Methods: the THD was performed by one surgeon in 459 patients under local anesthesia in 2013- 2021. Patients were aged 45 (37;54) years, 355 (77.3%) — males. Stage II was diagnosed in 85 (18.5%) cases, stage II-III — in 47 (10.2%), stage III — in 296 (64.5%), stage III-IV and IV — in 27 (5.9%) and 4 (0.9%) cases. Regression and CUSUM analysis were used to construct the learning curve. The operation time, postoperative morbidity and recurrence rate were assessed.Results: the operation time was 25 (25;32.5) minutes, it was achieved on 210 cases. The postoperative complications occurred in 7 (1.5%) cases and were significantly often in stage III-IV and IV — 3 (9.7%) cases (p = 0.001). Recurrence was showed in 29 (6.3%) cases after 1 year of follow-up. The CUSUM function graph showed that with the experience level, a 2-fold decrease in the morbidity rate and recurrence rate was achieved after 24 and 28 procedures, respectively. When experience is achieved, the morbidity rate was low regardless of the disease stage. Despite the experience obtained, in patients operated in the 3rd and 4th quartiles, the recurrences occurred in 10 (7.7%) and 9 (8.8%) patients, respectively.Conclusion: the indicator of experience obtained is the decrease of operation time and post-op morbidity. The experience level dies not affect recurrence rate in stages III-IV due to limitations of the technique.

From Augmented to Virtual Reality in Plastic Surgery: Blazing the Trail to a New Frontier.

Augmented reality (AR) and virtual reality (VR)-termed mixed reality-have shown promise in the care of operative patients. Currently, AR and VR have well-known applications for craniofacial surgery, specifically in preoperative planning. However, the application of AR/VR technology to other reconstructive challenges has not been widely adopted. Thus, the purpose of this investigation is to outline the current applications of AR and VR in the operative setting. The literature pertaining to the use of AR/VR technology in the operative setting was examined. Emphasis was placed on the use of mixed reality technology in surgical subspecialities, including plastic surgery, oral and maxillofacial surgery, colorectal surgery, neurosurgery, otolaryngology, neurosurgery, and orthopaedic surgery. Presently, mixed reality is widely used in the care of patients requiring complex reconstruction of the craniomaxillofacial skeleton for pre- and intraoperative planning. For upper extremity amputees, there is evidence that VR may be efficacious in the treatment of phantom limb pain. Furthermore, VR has untapped potential as a cost-effective tool for microsurgical education and for training residents on techniques in surgical and nonsurgical aesthetic treatment. There is utility for mixed reality in breast reconstruction for preoperative planning, mapping perforators, and decreasing operative time. VR has well- documented applications in the planning of deep inferior epigastric perforator flaps by creating three-dimensional immersive simulations based on a patient's preoperative computed tomography angiogram. The benefits of AR and VR are numerous for both patients and surgeons. VR has been shown to increase surgical precision and decrease operative time. Furthermore, it is effective for patient-specific rehearsal which uses the patient's exact anatomical data to rehearse the procedure before performing it on the actual patient. Taken together, AR/VR technology can improve patient outcomes, decrease operative times, and lower the burden of care on both patients and health care institutions.

Efficient evaluation of misalignment between real and virtual objects for HMD-Based AR assembly assistance system

Augmented reality (AR) technology is a promising tool for field service applications such as assembly. AR can show computer-aided design (CAD) models of assembly parts at installation locations. This provides a means for delivering assembly instructions to an operator. Furthermore, evaluating the assembly process can be beneficial for preventing assembly errors. Field service engineers who perform assembly operations may choose to use a head-mounted display (HMD) for its good portability and hands-free operation. In this study, we propose a method for efficiently evaluating the misalignment between real and virtual objects, which is a mismatch between the two objects’ poses, in an HMD-based AR assembly assistance system. By using a depth camera in the HMD, we evaluate the misalignment by comparing the depth maps of the real and virtual worlds. With our preliminary prototype, the system can evaluate misalignment with an accuracy of ±1 cm at a rate of 30 fps in real time. Moreover, we also propose a coordinate calibration method and establish a basic HMD-based AR assembly assistance system to demonstrate the methods. The efficient evaluation of misalignment could help to monitor operations to prevent assembly errors and decrease operation time.

Clinical application of artificial intelligence-assisted three-dimensional planning in direct anterior approach hip arthroplasty

PurposeThe objective of this study was to investigate the efficacy of an artificial intelligence-assisted 3D planning system (AIHIP) in total hip arthroplasty by direct anterior approach and assess the reliability of the AIHIP preoperative program in terms of both interobserver and intraobserver agreement.MethodsA retrospective analysis was conducted on patients who underwent unilateral primary THA via direct anterior approach from June 2019 to March 2022. Participants were randomly assigned to receive either the AIHIP system (n = 220) or the 2D template (control group) (n = 220) for preoperative planning. The primary outcome aimed to evaluate the correspondence between the prosthesis selected intro-operation and the one planned preoperatively, as well as to calculate the intraclass correlation coefficient (ICC). Secondary outcomes included operation time, intraoperative blood loss, fluoroscopy times, Harris hip score (HHS), lower limb length difference (LLD), femoral offset (FO), and bilateral femoral offset difference.ResultsNo significant differences were observed in gender, age, body mass index (BMI), aetiology, and American Society of Anesthesiologists (ASA) score between the two groups. Both planning methods exhibited good intraobserver agreement for component planning (ICC: 0.941–0.976). Interobserver agreement for component planning was comparable between the two methods (ICC: 0.882–0.929). In the AIHIP group, the accuracy of acetabular cup and femoral stem prosthetics planning significantly improved, with accuracies within the size range of ± 0 and ± 1 being 76.8% and 90.5% and 79.5% and 95.5%, respectively. All differences between two groups were statistically significant (p < 0.05). Patients receiving AIHIP preoperative planning experienced shorter operation times, reduced intraoperative blood loss, fewer fluoroscopy times, and lower leg length discrepancy (LLD) (p < 0.05). Moreover, they demonstrated a higher Harris hip score (HHS) at three days post-surgery (p < 0.05). However, no significant differences were found in femoral offset (FO), difference of bilateral femoral offsets, and HHS at 1 month after the operation.ConclusionUtilizing AIHIP for preoperative planning of direct anterior approach THA can significantly enhance the accuracy of prosthetic sizing with good reliability, decrease operation time, reduce intraoperative blood loss, and more effectively restore the length of both lower limbs. This approach has greater clinical application value.

Outcomes and Complications Associated With the Learning Curve for Endoscopic Cervical Foraminotomy: A Systematic Review and Meta-Analysis.

A systematic review and meta-analysis. The objective of this study is to examine the impact of the learning curve for endoscopic cervical foraminotomy for clinical outcomes and patient safety. Endoscopic cervical foraminotomy is a minimally invasive surgical technique emerging in the literature for surgical management of cervical radiculopathy without the use of open incision. The adoption of endoscopic cervical foraminotomy may be hindered by the learning curve, although no review and meta-analysis exists to date on the topic. A systematic review and meta-analysis was performed using PubMed, CINAHL, and MEDLINE from database inception until July 11, 2023. Inclusion criteria were articles that examined endoscopic cervical foraminotomy, reported outcomes, and/or complications for endoscopic cervical spine surgery relevant to the learning curve and had full-text. A random effects meta-analysis was performed for outcomes and complications. A total of three articles (n=203 patients) were included from 792 articles initially retrieved. The learning curves from four surgeons were examined with a FWM 21 procedures until the competency phase. There was no significant difference in the postoperative hospitalization length ( P =0.669), postoperative recovery room time ( P =0.415), intraoperative blood loss ( P =0.064), and total complication rates (10.9% vs . 1.2%, P =0.139) between endoscopic cervical foraminotomy procedures performed in the learning phase as compared with the competency phase of the learning curve. There was a significant decrease in operative time from the learning phase to the competency phase ( P =0.005). Competency was achieved on the learning curve for endoscopic cervical foraminotomy after about 21 procedures. There is no significant difference in postoperative hospitalization time, postoperative recovery room time, intraoperative blood loss, and complication rates between the learning phase and the competency phase of the learning curve for endoscopic cervical foraminotomy, noting the relatively small sample size of this study that may underpower this finding.

The Effect of Intraoperative Margin Assessment During Breast Conserving Surgery for Breast Cancer in a Dutch Cohort

IntroductionIntraoperative specimen radiography is a routinely used procedure to ensure adequate resection of non-palpable breast tumors. Intraoperative digital specimen mammography (IDSM) is an alternative to conventional specimen radiography (CSR) which provides immediate specimen evaluation and can potentially decrease operation time. IDSM may also result in lower positive margin and re-excision rates. IDSM was implemented in our hospital in 2018. The objective of this study was to evaluate the effect of using IDSM versus CSR on operation time, margin status and re-excision rates in breast conserving surgery. MethodsThe present study is a single-center retrospective cohort study with 2 patient cohorts: one which underwent CSR (n = 532) and one which underwent IDSM (n = 475). The primary outcome was the operation time. Secondary outcomes were the margin status of the primary surgery, the cavity shaving rate, and the re-excision rate. Differences between cohorts were compared using univariate statistics and multiple regression analyses to adjust for variables that were significantly different between the groups. ResultsIDSM use was associated with an 8-minute reduction in surgery time (B = -8.034, 95% CI [-11.6, -4.5]; P < .001). Treatment variables independently associated with the operation time included use of IDSM, type of surgery, and performance of cavity shaving. Cavity shaves were more often performed when IDSM was used (24% for IDSM vs. 14% for CSR, P < .001), while the proportion of negative margin rates (93% for IDSM vs. 96% for CSR, P = .070) was comparable. ConclusionIDSM was associated with a modest reduction in operation time. Surgeons performed more cavity shaves since the introduction of IDSM, but this increase was not reflected by difference in negative margin rates.

Sternalsparing aortic valve replacement via right anterior minithoracotomy: An early experience.

This study aims to evaluate the perioperative outcomes of aortic valve replacement (AVR) via right anterior minithoracotomy (RAT) during the learning curve. It was a retrospective, observational, cohort study of patients who underwent RAT AVR from June 2015 to April 2022. Primary outcomes measured were 30-day morbidity and mortality. A total of 107 consecutive patients underwent elective RAT AVR. Our patients were mostly male (78.5%), elderly (mean 68.7 years), and obese (34.6%). A majority of the patients (93.5%) were of low operative risk. Median cross-clamp and bypass times were 95 and 123 minutes respectively. There was a statistically significant correlation between increase in number of cases and decrease in operative time. All patients had no paravalvular leak at discharge. There were no operative cardiovascular mortality or major morbidity including stroke, myocardial infarction, renal failure requiring dialysis, or vascular complication. No patient required intraoperative conversion to full sternotomy for completion of AVR. Our study demonstrated that RAT AVR can be safely introduced. The learning curve required in performing RAT AVR can be safely negotiated through training, previous experience in minimally invasive surgery, careful patient selection including use of preoperative computed tomography of the aorta, and introduction of sutureless/rapid deployment valves.

Lessons Learned – the Learning Curve of Percutaneous Hallux Valgus Correction Using 3rd Generation MICA in 106 Consecutive Cases

Category: Bunion; Other Introduction/Purpose: Minimally-invasive Chevron and Akin osteotomy (MICA) represents the third-generation percutaneous hallux valgus surgery which is characterized by an extra-articular osteotomy, stable internal fixation and a high potential for correction. Compared to other percutaneous techniques of the foot, MICA is generally regarded as an advanced and demanding surgical procedure with a prolonged learning curve. The aim of this study is to analyze a single-surgeons learning curve with his first 106 consecutive MICA procedures. Methods: Between May 2018 and November 2022, 106 consecutive MICA procedures performed by the author were prospectively analyzed focusing on surgery duration, number of fluoroscopies, radiological correction results and surgery- associated complications using a modified Clavien-Dindo classification. There were 95 female and 11 male patients with a mean age of 53y (range 16-78y). The mean preoperative intermetatarsal angle I/II (IMA) was 15,7°, the mean hallux valgus angle (HVA) 28,7°. Results: The average amount of radiological correction was 12,6° for IMA and 16,8° for HVA. Overall, the mean surgery duration was 41,6min. (range 27-90min.), the number of fluoroscopies (fs) was 110,8 (range 64-186 fs). Comparing the first 10 MICAS vs. the last 10 procedures, both surgery duration and the amount of fluoro shots decreased significantly (58,8min vs. 32,4min and 165,9 fs vs. 83,1fs). According to the modified Clavien-Dindo classification, there were three grade 1 complications (superficial cellulitis requiring oral antibiotics), four grade 2 complications (1 intraoperative conversion to open surgery, 1 delayed union, 2 symptomatic recurrences) and one grade 3 complication (delayed wound-healing requiring superifical wound revision). Overall screw removal rate was 18 /106 cases, all due to prominent hardware with square headless designed screws (non-beveled). Conclusion: This study represents the largest case series on the learning curve of MICA. Although the learning curve is prolonged requiring specific training and intensive practice, the rate of severe complications is not increased compared to open hallux valgus surgery. The use of bevel-headed screws is strongly advised to reduce the rate of secondary hardware removal. The learning curve manifests itself predominantly in a decreasing operation time and lower number of fluoroscopies. Adherence to the principles of MICA with stable fixation and meticulous intraoperative control of each surgical step helps to reduce complications and allows for adequate correction from the beginning.

Risk factors for blood transfusion and postoperative anaemia following total knee arthroplasty.

Blood transfusion and postoperative anaemia are complications of total knee arthroplasty (TKA) that are associated with substantial healthcare costs, morbidity, and mortality. There are few data from large datasets on the risk factors for these complications. We retrospectively reviewed the records of TKA patients from a single tertiary care institution from February 2016 to December 2020. There were a total of 14,901 patients in this cohort with a mean age of 67.9 years (SD 9.2), and 5,575 patients (37.4%) were male. Outcomes included perioperative blood transfusion and postoperative anaemia, defined a priori as haemoglobin level < 10 g/dl measured on the first day postoperatively. In order to establish a preoperative haemoglobin cutoff, we investigated a preoperative haemoglobin level that would limit transfusion likelihood to ≤ 1% (13 g/dl) and postoperative anaemia likelihood to 4.1%. Risk factors were assessed through multivariable Poisson regression modelling with robust error variance. In multivariable analyses, each gram of tranexamic acid reduced transfusion likelihood by 39% (adjusted risk ratio (ARR) 0.61 (95% confidence interval (CI) 0.47 to 0.78)). Risk factors associated with an increased risk of transfusion included operating time (ARR 2.07 (95% CI 1.54 to 2.77)) and drain use (ARR 1.73 (95% CI 1.34 to 2.24)). In this study, we found that increased tranexamic acid dosing, decreased operating time, and decreased drain use may reduce transfusions following TKA. We also established a single preoperative haemoglobin cutoff of 13 g/dl that could help minimize transfusions and reduce postoperative complete blood counts.