Decrease In Resistance Research Articles

Ameliorative effect of diclofenac in rotenone corneal kindling model of drug-resistant epilepsy: Edge of dual COX and KMO inhibition

Epilepsy affects millions of people worldwide, about one-third patients with epilepsy exhibits resistance to available antiseizures medications, known as drug-resistant epilepsy (DRE). Mitochondrial dysfunction has been implicated as a hallmark in drug-resistant epilepsy via activation of microglial kynurenine 3-monooxygenase (KMO) and cyclooxygenase (COX) enzymes, leading to neuroinflammation and oxidative stress. Diclofenac, an equipotent non selective cyclooxygenase inhibitor, has inhibitory action on KMO enzyme and has also shown anti-inflammatory and antioxidant properties in animal models of epilepsy. These properties make it a suitable candidate for amelioration of DRE. However, its potential in drug-resistant epilepsy remained unexplored till date. In this study, dose dependent effect of diclofenac (5 mg/kg, 10 mg/kg, 20 mg/kg) has been explored in rotenone corneal kindling model of mitochondrial DRE. The results of our study revealed the induction of drug resistance to antiseizure medications and induced kynurenine 3-monooxygenase activity in rotenone corneal kindled epileptic mice in comparison to naive mice. Treatment of rotenone corneal kindled epileptic mice with diclofenac resulted in a significant decrease in drug resistance to antiseizure medications as evident by a reduction in seizure score in the treatment groups as compared to control group, in post-treatment resistance validation. The kynurenine 3-monooxygenase inhibitory activity (as evidenced by decreased levels of neurotoxic quinolinic acid) and the antioxidant effect (as evident by significantly reduced oxidative stress) in the diclofenac treated groups, emerged as a major contributor for its ameliorative action. Findings of this study suggests, diclofenac can be used as an adjunct therapy in amelioration of drug-resistant epilepsy.

Experiments on High-Temperature Irradiation of Li2ZrO3/MgLi2ZrO4 Ceramics by He2+ Ions

The key objective of this study is to determine the effect of interphase boundaries, the formation of which is caused by the variation of Li2ZrO3/MgLi2ZrO4 phases in lithium-containing ceramics based on lithium metazirconate, on the resistance to near-surface layer destruction processes associated with irradiation with He2+ ions. During the observation of the deformation effects that have an adverse impact on the volumetric swelling of the near-surface layers of ceramics, the thermal expansion factor caused by high-temperature irradiation was considered, simulating conditions as close as possible to the operating conditions of these materials as blankets for tritium propagation. During the studies conducted, it was established that an elevation in the contribution of MgLi2ZrO4 in the composition of ceramics leads to a rise in resistance to deformation swelling caused by structural distortions of the crystal lattice, due to a decrease in the effect of thermal expansion, alongside the presence of interphase boundaries. The established dependencies of the change in the hardness of the near-surface layer of the studied ceramics made it possible to establish the kinetics of softening caused by the deformation distortion of the crystalline structure, as well as to determine the relationship between volumetric swelling and softening (change in hardness) and a decrease in crack resistance (change in the value of resistance to single compression).

Can acclimation of freshwater rotifers to silver nanoparticles or 5-fluorouracil influence their multi- and transgenerational effects?

Emerging chemical contaminants (ECCs) are among the major environmental threats in present century. A variety of ECCs is released into aquatic environments with little knowledge about their long-term impacts to organisms. We examined the role of acclimation of the freshwater rotifer Brachionus calyciflorus to silver nanoparticles (Ag-NPs) and 5-fluorouracil (5-FU) for determining their ability to deal with these ECCs individually and in mixtures along multiple generations. Additionally, transgenerational effects were also assessed during the recovery phase. Rotifers acclimated at EC10 of Ag-NPs along generations showed a higher ability to deal with higher concentrations of these nanoparticles or 5-FU along generations. Rotifers acclimated to EC10 of 5-FU showed varied responses, as their population growth rates were affected at the initial generations once exposed to higher concentration (EC50) of the same or a new contaminant; however, the rotifers acquired resistance in later generations. The exposure of generational Ag-NP-acclimated rotifers to the mixture of Ag-NPs and 5-FU at EC50 led to a shift from no effects to negative effects along successive generations, suggesting a decrease in resistance, which remained even in the post-exposure recovery phase. Similar transgenerational adverse effects were also observed for the generational Ag-NP-acclimated rotifers released from 5-FU. Rotifers acclimated to 5-FU showed a decrease in population growth rate at the first generation of recovery phase, possibly shifting their optimal environmental conditions when released from contaminants. Overall, our results suggest that rotifers had a high level of plasticity to ECC exposure in freshwaters; however, acclimation can be generic or contaminant dependent.

Influence of the toxic vapors on the gas sensitivity and structure of poly(o-toluidine)

In the present work, we investigated the influence of the toxic vapors (ammonia, chloroform, tetrahydrofuran, dimethylformamide, nitrobenzene, toluene) on the specific resistance, optical absorption, and structure of conducting polymer poly-o-toluidine (PoT) obtained by oxidative polymerization of o-toluidine in toluene sulfonic acid (TSA) solution. This polymer has a high level of crystallinity and is thermal stable to 473 K (200 0C). The action of organic solvent vapors causes an increase in PoT-TSA resistance by 1.3-1.4 times, while after the action of ammonia, the resistivity increases almost 500 times. The activation energy of charge transfer Ea also increases from 0.21 to 0.71 eV under the action of ammonia due to the deprotonation of the polymer and its transformation to the resistive base form. When the organic solvents are used, the observed phenomena have a different direction (resistance increase or decrease) due to the peculiarities of polymer-solvent molecular interaction. This phenomenon may be used for selective detection of solvents.

THE IMPACT OF HOP EXTRACT ACTIVE COMPONENTS ON METABOLIC DISTURBANCES IN ESTROGEN DEFICIENT FEMALE RATS WITH PREDIABETES

A number of studies have shown a greater cardiovascular risk in women with type 2 diabetes compared to men. The latter may be due to more excessive manifestations of metabolic disorders in women, in particular postmenopausal, that develop even at the stage of prediabetes. Since the use of hormone replacement therapy in women after menopause had adverse results on the progression of cardiovascular events, an alternative method of reducing cardiovascular risk in postmenopausal women with prediabetes may be the use of phytoestrogens, which possess estrogen-like activity without negative side effects specific to exogenous estrogens. The aim of our study was to evaluate the effect of hop extract on metabolic disturbances in female rats with prediabetes under estrogen deficiency. Materials and methods. The study was conducted on three-month-old intact and ovariectomized Wistar rats with metabolic syndrome (MS) induced by high calorie diet (15% lard, 25% sucrose, 1% bile salts, 59% standard feed) for eight weeks. The test substances were administered intragastrically once per day in a dose of 20 μg/kg or 200 μg/kg b.w. in recalculation on 8-prenylnaringenin for hop extract and 200 μg/kg b.w. in recalculation on estradiol for the reference drug, from the fifth week after induction of metabolic syndrome. Results. It was revealed that administration of hop extract in a dose of 200 μg/kg, similar to estradiol, led to improvement in glucose tolerance and decrease in insulin resistance (p˂0.05) in estrogen deficient rats with MS. In contrast to estradiol, hop extract had no effect on the mass of uterus in ovariectomized animals. The use of hop extract only in the dose of 200 μg/kg, similar to estradiol, was accompanied by a significant decrease in body weight gain and visceral fat, as well as normalization of the total lipids content in serum of experimental animals (p˂0.05). It is of note, that hop extract resulted in decrease of hypertriglyceridemia (p˂0.05), but did not affect the level of total cholesterol, while estradiol reduced the concentration of total cholesterol (p˂0.05), and had no effect on the level of triglycerides. Hop extract in a dose of 200 μg/kg, as well as estradiol, led to a decrease in the intensity of lipid peroxidation induced by MS under estrogen deficiency, as evidenced by reduced concentration of conjugated dienes in serum (p˂0.05). At the same time, the total antioxidant activity of serum in these animals remained elevated compared to intact group. In rats with MS and hypoestrogenia, hop extract in the highest dose and estradiol resulted in complete normalization (p˂0.05) of the decreased level of NO stable metabolites in serum and the reduced activity of NO-synthase in heart. Conclusions. The revealed cardioprotective effect of hop extract that is realized due to the improved lipid profile and reduced insulin resistance, visceral obesity, oxidative stress and endothelial dysfunction in estrogen deficient female rats with MS indicates the prospects of its use for prevention and treatment of cardiovascular complications in postmenopausal women with prediabetes.

Angle-dependent Hall resistivity and longitudinal resistivity of type-II superconductor

We use time-dependent Ginzburg–Landau theory in a three-dimensional model, including thermal noise, to analyze angle-dependent Hall resistivity and longitudinal resistivity of type-II superconductor. The Hall resistivity and longitudinal resistivity are calculated as functions of temperature, magnetic field and the angle θ between the magnetic field and the ab-plane in the vortex-liquid regime. Our theoretical calculations within a self-consistent fluctuation approximation for MgB2 and HgBa2CaCu2O6 materials are in good agreements with the experimental findings for both below and above the critical temperature Tc. We observe that when the field angle decreases, the transition temperature increases and the magnitude of longitudinal resistivity decreases, which is qualitatively comparable to decrease of the perpendicular field component. However, when the magnetic field direction approaches the layer surface, it shows a clear different effect from that of a perpendicular field with the same normal component.

The effect of oxidation on tribology behavior of nickel-graphite coated stainless steel SS420

The main solution to the challenge of maintaining maximum sealing in the compressor section of each gas turbine is the use of abradable coatings. These coatings have a double duty, including (a) maintaining the lagging and (b) protecting the tips of the rotor blades. Choosing the type of abradable coating primarily depends on the service temperature of the coating. Nickel-graphite (Ni-G) coating is a good choice for use up to 480 °C and, or steel/sub-alloy rotor blades. In this research, the Ni-G coating was applied by the flame spraying method of Ni-G powder with a thickness of about 250 μm on an SS420 stainless steel substrate. The effect of the composition of the bonding layer was also investigated using two compositions, Ni-5Al and NiCrAlY. Obtaining the knowledge of applying Ni-G coating by flame spraying, identifying the structural and compositional characteristics of the coating (through optical and electron metallography), and the effect that oxidation can have on the tribological behavior of the coating were among the goals of this project. The best conditions for spraying the Ni-G coating were achieved an oxygen gas pressure of 6 bar, oxygen flow rate of 18 L min−1, acetylene pressure of 1.5 bar, acetylene flow rate of 24 L min−1, and the distance between the gun head and the sample surface was 22 cm. The results showed that placing the coating in oxidizing conditions increases its coefficient of friction. The increase in the coefficient of friction was attributed to the formation of oxide shells on the surface of the coating after 500 h of exposure to oxidation conditions. Corresponding to the higher coefficient of friction, the oxidized coating showed a decrease in wear resistance as a result of oxidation. This result can show the decrease in abradable of this coating with increasing service time.

Graphene Oxide-Silica Green Hybrid Nanocomposites: Fabrication via Latex Mixing and Mechanical Properties Evaluation

ABSTRACT This study investigates the incorporation of sustainable self-assembled graphene oxide-nano silica (GO/NS) hybrid nanoparticles into the natural rubber latex matrix via latex mixing. The primary objective is to assess the synergistic impact of these nanofillers on the mechanical properties of natural rubber latex using both static and dynamic mechanical analysis. Results reveal significant enhancements in mechanical properties, with NRL GO/NS 2 exhibiting a remarkable 188% increase in tensile strength and NRL GO/NS 3 showing a substantial 107% increase. Furthermore, NRL GO/NS 3 demonstrates a 30% reduction in rolling resistance and a remarkable 200% improvement in wet grip, while NRL GO/NS 2 exhibits an 88% increase in wet grip and a 43% decrease in rolling resistance, suggesting potential fuel efficiency benefits. These advancements hold promise for various applications such as automotive tire manufacturing, biomedical devices, and the production of elastomeric goods.

Fast Responsive and Highly Sensitive Ethanol Gas Sensors Designed by Agar‐Laponite Hybrid Hydrogels

AbstractLaponite, a synthetic nanosilicate clay and agar, a natural polysaccharide, both imbibe large amount of water and form into hydrogels. Various physical and chemical stimuli elicit the hydrogel response, which has been applied in designing diverse sensors and biomedical systems. In this work, we exploit the change in hydrogel's ionic conductivity due to volatile organic compounds (VOCs) (e. g. ethanol) interaction with the surfaces of Laponite‐Agar hybrid hydrogel films. Gas sensing studies are carried out on silicon (Si) and flexible polyethylene terephthalate (PET) substrates by monitoring the resistance changes. Pristine Laponite hydrogel has shown increase in resistance as it interacted with the ethanol, whereas pure agar and Laponite‐Agar have shown decrease in resistance. Moreover, Laponite‐Agar gel films have exhibited high sensitivity, fast response (4 s) and recovery time (15 s) with lowest detection limit of 6 ppm. Selectivity test carried shows high ethanol sensing response and exhibited very good reproducibility. Observed responses and sensing mechanism are discussed based on changes in ionic conduction resulted due to interacting ethanol with the gel surface network structure. Present study paves the way for understanding and designing low cost, soft and flexible hydrogel gas sensors.

In Situ Analysis of Binder Degradation during Catalyst-Accelerated Stress Test of Polymer Electrolyte Membrane Fuel Cells.

High-oxygen-permeability ionomers (HOPIs) are being actively developed to enhance the performance and durability of high-power polymer electrolyte membrane fuel cells (PEMFCs). While methods for evaluating binder performance are well-established, techniques for assessing binder durability and measuring its degradation in situ during the AST process remain limited. This study examines the distribution of relaxation times (DRT) and Warburg-like response (WLR) methods as in situ analysis techniques during the catalyst-accelerated stress test (AST) process. We conducted catalyst-ASTs (0.6-0.95 V cycling) for 20,000 cycles, monitoring changes using cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), and linear sweep voltammetry (LSV). Contrary to expectations, during the catalyst-AST, the ion transport resistance of the binder decreased, indicating no binder degradation. Scanning electron microscopy/energy dispersive spectrometer (SEM/EDS) analysis revealed that the degradation rate of the catalyst and the support was relatively higher than that of the binder, leading to a reduction in catalyst layer thickness and improved binder network formation. By applying the DRT method during the catalyst-AST process, we were able to measure the increase in oxygen reduction reaction (ORR) resistance and the decrease in proton transport resistance in situ. This allowed for the real-time detection of the reduction in catalyst layer thickness and improvements in ionomer networks due to catalyst and support degradation. These findings provide new insights into the complex interplay between catalyst degradation and binder performance, contributing to the development of more durable PEMFC components.

Electrophoretic deposition of graphene oxide modified carbon paper: Enhance the interface strength and decrease the interface resistance

The gas diffusion layer (GDL) is a key component of the proton exchange membrane fuel cell (PEMFC) with the central roles of transporting electrons, supporting the electrode structure and transporting protons. However, the traditional carbon paper for GDL greatly limits the large-scale commercial application of PEMFC due to shortcomings such as low mechanical strength and poor electrical conductivity. Based on this, in this paper, ultrasound-assisted electrophoretic deposition of graphene oxide process is used to modify the primary carbon fiber paper and simultaneously improve the interfacial bond strength and interfacial conductivity of the carbon fiber paper to realize the facile preparation of phenolic resin carbon/reduced graphene oxide/carbon fiber (CFP-GO250–25) carbon-carbon composites with high mechanical and electrical conductivity properties. Compared to the unmodified carbon paper, the prepared CFP-GO250–25 shows an increase in tensile strength of about 76.5 % to 5.4 Mpa, a decrease in resistivity from 24.00 mΩ·cm to 10.21 mΩ·cm, and also has an excellent air permeability of 7.58 L/min. This study provides a reference for the facile preparation of phenolic resin carbon/reduced graphene oxide/carbon fiber carbon/carbon composites and promotes the large-scale commercial application of carbon fiber paper for low-cost GDL.

Synthesis and characterization of MWCNTs nanocomposite for fabrication of tensometric transducers

A nanocomposite was prepared using MWCNTs and micro-sized bronze particles dispersed in elastomer silicone organic compound (SILAGER 8030). The nano-composite was characterized by FT-IR, SEM, EDS and Raman spectroscopy; showing the rough surface of the composite with interweaving of nano threads. This nano-composite was used to manufacture strain gauge. The conductivities were measured concerning wt% of micro-sized bronze, compression and time. The maximum electrical conductivity obtained was 2.1 S/m at 5.0 wt% bronze metal alloy and MWCNT (3.0 wt%) at 16% compression. With increasing amplitude and frequency of ultrasonic exposure, an increase in the pressure associated with cavitation in the liquid was observed. Each value of ultrasound exposure corresponded to a certain value of electrical resistance. At the same time, with an increase in the intensity of the cavitation effect on the strain gauge transducer, extremum points appeared, which corresponded to a decrease in resistance. The developed material is highly useful for manufacturing strain gauges to be used in liquid ring vacuum pumps as a measuring transducer of liquid ring pressure into signals associated with changes in resistance. This allows liquid ring vacuum pumps to be precisely controlled; improving their energy efficiency and reliability.

Study on the microstructure, mechanical and corrosion behaviors of 2A12 Al matrix composites containing B4C and 50% K2TiF6 flux

This study presents an innovative exploration into the development and characterization of boron carbide (B4C) reinforced aluminum (Al) metal matrix composites (AMMCs), specifically focusing on the 2A12 Al alloy. Utilizing a cutting-edge vacuum induction melting process, the research investigates the effects of varying B4C particle concentrations in conjunction with 50% K2TiF6 flux additions. This novel approach aims to enhance the microstructural integrity, mechanical properties, and corrosion resistance of the AMMCs. The research unveils a significant improvement in microhardness and tensile strength with the increase of B4C content. This enhancement is attributed to the efficient load transfer mechanism from the aluminum matrix to the B4C phase and the thermal expansion coefficient mismatch-induced dislocations. A critical finding of this study is the uniform distribution of B4C particles and the formation of a Ti-rich layer around these particles, facilitated by the K2TiF6 flux. This layer acts as a barrier, minimizing interfacial reactions. Electrochemical testing reveals that there is a slight decrease in corrosion resistance with increased B4C content. The outcomes of this research contribute to the field of metal matrix composites, offering a path forward for the application of B4C-reinforced AMMCs in demanding industrial environments where high strength, stiffness, and durability are critical. The study's findings open new avenues for advanced materials development in aerospace, automotive, and energy sectors.

Optimising ship principal dimensions with a Dung Beetle Optimizer and random forest proxy model

ABSTRACT Shipping serves as an important component of global trade, with speed being a key attribute closely tied to navigational resistance. Amid rising marine pollution, the International Maritime Organisation (IMO) requires shipowners to modify ships to comply with existing requirements. Herein, focusing on the static water sailing resistance, whole-ship hull line optimisation was conducted for Japan Bulk Carrier (JBC). The optimisation included the bulbous bow, inflow and outflow sections, and the parallel mid-body. Initially, a random forest resistance proxy model was introduced to replace traditional Computational Fluid Dynamics (CFD) methods. The model’s hyperparameters were optimised using the Dung Beetle Optimizer algorithm. Subsequently, this algorithm was employed to optimise ship design parameters. Finally, comparisons confirmed the proxy model’s high precision, and the optimisation yielded substantial outcomes, achieving a 4.7% decrease in resistance.

Fabrication and thermoelectric properties of multilayer textured Sr-doped Ca3Co4O9/Ag laminar composites

This work presents a comparative analysis of pure and Ag-intercalated Ca3Co4O9 multilayer thermoelectric materials prepared through the hot-uniaxial pressing technique. Samples were prepared by attrition milling and hot-pressed at 900 °C and 55 MPa for 1 h. They were mirror polished, and some of them were stacked with and without intermediate Ag foil and hot-pressed again at 900 °C and 52 MPa for 1 h. Out-of-plane XRD showed that samples are nearly single-phase, and the grains are well oriented with their ab-plane perpendicular to the pressure direction. Microstructural studies confirmed perfect welding in the multilayer samples accompanied by the formation of a very thin layer containing larger grains and notable Ag diffusion close to the Ca3Co4O9/Ag interface. Three-point bending stresses have been increased in Ag-containing samples, while microhardness has been raised in all samples hot-pressed twice. Thermoelectric measurements showed a decrease of thermal gradient along the Ag-containing sample, together with a drastic decrease of electrical resistivity when compared to the Ag-free ones. However, the Ag-layers have promoted a drastic decrease in the Seebeck coefficient, reflected in a notable reduction of the power factor of Ca3Co4O9/Ag multilayer composites. Nevertheless, these results show that it is possible to use these materials to reduce Joule heating and increasing the compatibility with the welding compounds when building thermoelectric modules. Moreover, they open a new research line searching for larger S compounds to be intercalated with Ag foils.

External short circuit of lithium-ion battery after high temperature aging

The microscopic and macroscopic changes of lithium-ion batteries after high temperature cycling and their effect on external short circuit (ESC) are studied in this study. The results indicate that solid electrolyte interphase and cathode electrolyte interphase cover the surface of anode and cathode. Transition metal, Mn is dissolved from the cathode. Capacity and resistance decreases and increases after cycling at high temperature. The safety of batteries after ESC is ranked as: 70 % state of health (SOH) > 100 % SOH > 80 % SOH > 90 % SOH. Thermal runaway only occurs to battery with 90 % SOH after ESC. Increase of resistance after cycling affects heat generation during ESC less. Onset temperature and thermal runaway temperature increases and decreases owing to solid electrolyte interphase growth and Mn dissolution. Compared to fresh battery, safety of battery with 70 % SOH after ESC increases. Fast discharging causes side reactions for aged batteries, which also generate heat. The heat generation effect of fast discharging decreases with the decrease of SOH after 90 % SOH. Local micro internal short circuit causes more heat generation for aged batteries. The results are important for safety control of lithium-ion battery.

Preparation of porous composite coatings to suppress surface charge movement and reduce electrical resistivity

In this work, Cr2O3/TiO2 composite coatings were prepared on α-Al2O3 insulating ceramic matrix surface by screen printing and solid phase sintering methods to yield an average film thickness of about 14.10 μm. Scanning electron microscopy (SEM) revealed changes in the pore structures of the coatings at different TiO2 contents. The atomic force microscopy (AFM) analysis of the coating surface roughness suggested a TiO2 content of 0.025 mol to yield the best surface roughness and pore structure of the coating. The calculation showed an increase in the energy level of the deep trap center on the surface from 1.506 eV to 1.547 eV, reaching a maximum. The surface resistivity of insulating ceramics decreased from 1016 Ω to 1012 Ω. The formation of deep surface traps and the decrease in surface resistivity promoted charge dispersion and suppressed the formation of flashover channels, effectively improving the surface flashover voltage of the ceramics.

Co-Benefits of Antimicrobial Resistance Mitigation from China’s PM2.5 Air Pollution Reduction Between 2014–2020

The One Health concept acknowledges the importance of multiple dimensions in controlling antimicrobial resistance (AMR). However, our understanding of how anthropological, socioeconomic, and environmental factors drive AMR at a national level remains limited. To explore associations between potential contributing factors and AMR, this study analyzed an extensive database comprising 13 major antibiotic-resistant bacteria and over 30 predictors (e.g., air pollution, antibiotic usage, economy, husbandry, public services, health services, education, diet, climate, and population) from 2014 to 2020 across China. The multivariate analysis results indicate that fine particulate matter with a diameter of 2.5 μm or less (PM2.5) is associated with AMR, accounting for 12% of the variation, followed by residents’ income (10.3%) and antibiotic usage density (5.1%). A reduction in PM2.5 of 1 µg·m−3 is linked to a 0.17% decrease in aggregate antibiotic resistance (p < 0.001, R2 = 0.74). Under different scenarios of China’s PM2.5 air-quality projections, we further estimated the premature death toll and economic burden derived from PM2.5-related antibiotic resistance in China until 2060. PM2.5-derived AMR is estimated to cause approximately 27 000 (95% confidence interval (CI): 6468–48 830) premature deaths and about 0.51 (0.12–0.92) million years of life lost annually in China, equivalent to an annual welfare loss of 8.4 (2.0–15.0) billion USD. Implementing the “Ambitious Pollution 1.5 ℃ Goals” scenario to reduce PM2.5 concentrations could prevent roughly 14 000 (3324–26 320) premature deaths—with a potential monetary value of 9.8 (2.2–17.6) billion USD—from AMR by 2060. These results suggest that reducing air pollution may offer co-benefits in the health and economic sectors by mitigating AMR.

Endovascular Treatment of Flow-Limiting Iliofemoral Stenosis Improves Left Ventricular Diastolic Function in Patients With HFpEF by Reducing Aortic Pulsatile Load.

Recent research indicates that there is a high prevalence of heart failure with preserved ejection fraction in patients with peripheral artery disease. We hypothesized that endovascular treatment (EVT) of flow-limiting peripheral stenosis improves left ventricular (LV) diastolic function. Thirty patients with symptomatic peripheral artery disease and heart failure with preserved ejection fraction according to Heart Failure Association-preserved ejection fraction score who were scheduled for EVT or angiography were investigated at baseline, the day after EVT (n=25) or angiography (control, n=5), and at 4 months follow-up. Peripheral hemodynamics were determined by the total peripheral resistance, common femoral artery flow, and ankle brachial index. Aortic function was measured by arterial compliance, augmentation index, and pulse wave velocity. Aortic pulsatile load was estimated as the characteristic impedance of the proximal aorta and the magnitude of wave reflection (reflection coefficient). LV mass index, LV mean wall thickness, and systolic and diastolic function were assessed using echocardiography. Patient-centered outcomes were treadmill walking distance and New York Heart Association class. After EVT, peripheral hemodynamics changed significantly with a decrease in total peripheral resistance and an increase in common femoral artery flow and ankle brachial index. Aortic function improved after EVT, with significantly reduced augmentation index and pulse wave velocity and increased compliance immediately and at follow-up, resulting in a reduction in aortic pulsatile load (characteristic impedance of the proximal aorta and reflection coefficient). Concurrently, LV diastolic function improved after EVT compared with control, acutely and at follow-up, with increased septal and lateral e´ velocities and decreased E/e´ and left atrial volume index. The LV mass index and LV mean wall thickness decreased at follow-up. The New York Heart Association class and treadmill walking distance improved post-EVT at follow-up. Augmentation index, pulse wave velocity, and arterial compliance were identified as independent contributors to E/e´. Endovascular treatment of flow-limiting iliofemoral stenosis reduces aortic pulsatile load and concurrently lowers total peripheral resistance. This beneficial effect is associated with an acute and sustained improvement of left ventricular diastolic function. URL: http://www.clinicaltrials.gov; Unique identifier: NCT02728479.

High-fat diet impact on prostate gland from adiponectin knockout mice: Morphometric, metabolic and inflammatory cytokines analyses

AimsObesity is a global public health issue, and some studies have linked it to an increased risk of prostatic diseases. This study aimed to evaluate the effects of a high-fat diet on metabolic parameters and prostate morphology in wild-type (WT) and adiponectin knockout (KO) mice. Main methodsMale WT and KO mice were fed a control diet (CD) or high-fat diet (HFD) for 6 months. Serum metabolic parameters, inflammatory cytokines in epididymal fat tissue, dorsal prostatic lobe morphometry and histopathology were analyzed. Key findingsCD WT and CD KO mice did not exhibit altered metabolic or prostatic parameters. However, HFD WT mice showed altered glucose and insulin tolerance even without excessive weight gain. On the other hand, HFD KO mice developed obesity, with an increase in low-density lipoprotein (11.8 ± 5.1 vs. 31.4 ± 3.6 mg/dL), high-density lipoprotein (73.4 ± 7.4 vs. 103.4 ± 2.5 mg/dL), and total cholesterol levels (126.2 ± 16.1 vs. 294.6 ± 23.2 mg/dL), a decrease in insulin levels (28.7 ± 12.2 vs. 4.6 ± 2.3 μIU/mL), and glucose and insulin resistance. We also observed that HFD KO animals display an increase in inflammatory cytokines, such as IL6, IL1β, and IL1RA. The dorsal prostate from HFD KO animals also presented significant increases in the mast cells (1.9 ± 0,7 vs. 5,3 ± 1.5 cells/field) and Ki67 index (2.91 ± 0.6 vs. 4.7 ± 0.4 %). SignificanceThe above findings highlight the complex interactions between adiponectin, metabolism, malnutrition, and prostate health. Metabolic deregulation combined with adipose inflammation potentially induces a proliferative and inflammatory microenvironment in the prostate gland under conditions of low adiponectin production, potentially impairing prostate morphophysiology in the context of obesity and aging.