Decellularized Cartilage Matrix Research Articles

A Hybrid Scaffold Induces Chondrogenic Differentiation and Enhances In Vivo Cartilage Regeneration.

Extensively researched tissue engineering strategies involve incorporating cells into suitable biomaterials, offering promising alternatives to boost tissue repair. In this study, a hybrid scaffold, Gel-DCM, which integrates a photoreactive gelatin-hyaluronic acid hydrogel (Gel) with an oriented porous decellularized cartilage matrix (DCM), was designed to facilitate chondrogenic differentiation and cartilage repair. The Gel-DCM exhibited excellent biocompatibility in vitro, promoting favorable survival and growth of human adipose-derived stem cells (hADSCs) and articular chondrocytes (hACs). Gene expression analysis indicated that the hACs expanded within the Gel-DCM exhibited enhanced chondrogenic phenotype. In addition, Gel-DCM promoted chondrogenesis of hADSCs without the supplementation of exogenous growth factors. Following this, invivo experiments were conducted where empty Gel-DCM or Gel-DCM loaded with hACs/hADSCs were used and implanted to repair osteochondral defects in a rat model. In the control group, no implants were delivered to the injury site. Interestingly, macroscopic, histological, and microcomputed tomography scanning results revealed superior cartilage restoration and subchondral bone reconstruction in the empty Gel-DCM group compared with the control group. Moreover, both hACs-loaded and hADSCs-loaded Gel-DCM implants exhibited superior repair of hyaline cartilage and successful reconstruction of subchondral bone, whereas defects in the control groups were predominantly filled with fibrous tissue. These observations suggest that the Gel-DCM can provide an appropriate three-dimensional chondrogenic microenvironment, and its combination with reparative cell sources, ACs or ADSCs, holds great potential for facilitating cartilage regeneration.

An injectable cartilage-coating composite with long-term protection, effective lubrication and chondrocyte nourishment for osteoarthritis treatment

The osteoarthritic (OA) environment within articular cartilage poses significant challenges, resulting in chondrocyte dysfunction and cartilage matrix degradation. While intra-articular injections of anti-inflammatory drugs, biomaterials, or bioactive agents have demonstrated some effectiveness, they primarily provide temporary relief from OA pain without arresting OA progression. This study presents an injectable cartilage-coating composite, comprising hyaluronic acid and decellularized cartilage matrix integrated with specific linker polymers. It enhances the material retention, protection, and lubrication on the cartilage surface, thereby providing an effective physical barrier against inflammatory factors and reducing the friction and shear force associated with OA joint movement. Moreover, the composite gradually releases nutrients, nourishing OA chondrocytes, aiding in the recovery of cellular function, promoting cartilage-specific matrix production, and mitigating OA progression in a rat model. Overall, this injectable cartilage-coating composite offers promising potential as an effective cell-free treatment for OA. Statement of significanceOsteoarthritis (OA) in the articular cartilage leads to chondrocyte dysfunction and cartilage matrix degradation. This study introduces an intra-articular injectable composite material (HDC), composed of decellularized cartilage matrix (dECMs), hyaluronan (HA), and specially designed linker polymers to provide an effective cell-free OA treatment. The linker polymers bind HA and dECMs to form an integrated HDC structure with an enhanced degradation rate, potentially reducing the need for frequent injections and associated trauma. They also enable HDC to specifically coat the cartilage surface, forming a protective and lubricating layer that enhances long-term retention, acts as a barrier against inflammatory factors, and reduces joint movement friction. Furthermore, HDC nourishes OA chondrocytes through gradual nutrient release, aiding cellular function recovery, promoting cartilage-specific matrix production, and mitigating OA progression.

Photothermal-Controllable Microneedles with Antitumor, Antioxidant, Angiogenic, and Chondrogenic Activities to Sequential Eliminate Tracheal Neoplasm and Reconstruct Tracheal Cartilage.

The optimal treatment for tracheal tumors necessitates sequential tumor elimination and tracheal cartilage reconstruction. This study introduces an innovative inorganic nanosheet, MnO2 /PDA@Cu, comprising manganese dioxide (MnO2 ) loaded with copper ions (Cu) through in situ polymerization using polydopamine (PDA) as an intermediary. Additionally, a specialized methacrylic anhydride modified decellularized cartilage matrix (MDC) hydrogel with chondrogenic effects is developed by modifying a decellularized cartilage matrix with methacrylic anhydride. The MnO2 /PDA@Cu nanosheet is encapsulated within MDC-derived microneedles, creating a photothermal-controllable MnO2 /PDA@Cu-MDC microneedle. Effectiveness evaluation involved deep insertion of the MnO2 /PDA@Cu-MDC microneedle into tracheal orthotopic tumor in a murine model. Under 808nm near-infrared irradiation, facilitated by PDA, the microneedle exhibited rapid overheating, efficiently eliminating tumors. PDA's photothermal effects triggered controlled MnO2 and Cu release. The MnO2 nanosheet acted as a potent inorganic nanoenzyme, scavenging reactive oxygen species for an antioxidant effect, while Cu facilitated angiogenesis. This intervention enhanced blood supply at the tumor excision site, promoting stem cell enrichment and nutrient provision. The MDC hydrogel played a pivotal role in creating a chondrogenic niche, fostering stem cells to secrete cartilaginous matrix. In conclusion, the MnO2 /PDA@Cu-MDC microneedle is a versatile platform with photothermal control, sequentially combining antitumor, antioxidant, pro-angiogenic, and chondrogenic activities to orchestrate precise tracheal tumor eradication and cartilage regeneration.

Biomimetic approach for an articular cartilage patch: Combination of decellularized cartilage matrix and silk-elastin-like-protein (SELP) hydrogel

Articular cartilage degradation due to injury, disease and aging is a common clinical issue as current regenerative therapies are unable to fully replicate the complex microenvironment of the native tissue which, being avascular, is featured by very low ability to self-regenerate. The extracellular matrix (ECM), constituting almost 90% of the entire tissue, plays a critical role in its function and resistance to compressive forces. In this context, the current tissue engineering strategies are only partially effective in restoring the biology and function of the native tissue. A main issue in tissue regeneration is treatment failure due to scarce integration of the engineered construct, often following a gradual detachment of the graft. In this scenario, we aimed to create an adhesive patch able to adequately support cartilage regeneration as a promising tool for the treatment of cartilage injuries and diseases. For this, we produced an engineered construct composed of decellularized ECM (dECM) obtained from horse joint cartilage, to support tissue regeneration, coupled with a Silk-Elastin-Like Proteins (SELP) hydrogel, which acts as a biological glue, to guarantee an adequate adherence to the host tissue. Following the production of the two biomaterials we characterized them by assessing: 1) dECM morphological, chemical, and ultrastructural features along with its capability to support chondrocyte proliferation, specific marker expression and ECM synthesis; 2) SELP microarchitecture, cytocompatibility and mechanical properties. Our results demonstrated that both materials hold unique properties suitable to be exploited to produce a tailored microenvironment to support cell growth and differentiation providing a proof of concept concerning the in vitro biological and mechanical efficacy of the construct. The SELP hydrogel displayed a very interesting physical behavior due to its high degree of resistance to mechanical stress, which is generally associated with physiological mechanical load during locomotion. Intriguingly, the shear-thinning behavior of the hydrogel may also make it suitable to be applied and spread over non-homogeneous surfaces, therefore, we hypothesize that the hybrid biomaterial proposed may be a real asset in the treatment of cartilage defects and injuries.

Injectable decellularized cartilage matrix hydrogel encapsulating urine-derived stem cells for immunomodulatory and cartilage defect regeneration

Reconstruction of complex cartilage defects has remained a great challenge for tissue engineering due to the lack of stem cells and chronic inflammation within the joint. In this study, we have developed an injectable pig cartilage-derived decellularized extracellular matrix (dECM) hydrogels for the repair of cartilage defects, which has shown sound biocompatibility and immunomodulatory capacity both in vitro and in vivo. The dECM hydrogels can enhance the chondrogenic differentiation of human urine-derived stem cells (USCs). As shown by in vitro experiment, the USCs in the dECM hydrogels have survived, proliferated, and produced a mass of cartilage-specific extracellular matrix containing collagen II and aggrecan. And the USCs-laden dECM hydrogels have shown the capacity to promote the secretion of extracellular matrix, modulate the immune response and promote cartilage regeneration in the rat model for cartilage defect.

Direct 3D printing of decellularized matrix embedded composite polycaprolactone scaffolds for cartilage regeneration.

Treatment options for large osteochondral injuries (OCIs) are limited by donor tissue scarcity, morbidity, and anatomic mismatch. 3D printing technology can produce patient-specific scaffolds to address these large defects. Thermoplastics like polycaprolactone (PCL) offer necessary mechanical properties, but lack bioactivity. We fabricated 3D printed PCL scaffolds embedded with polylactic acid microspheres containing decellularized cartilage matrix (DM). DM incorporation within polylactic acid microspheres prevented its thermal degradation during the 3D printing process. The scaffolds replicated the mechanical properties of native cartilage and demonstrated controlled release of DM proteins. Human mesenchymal stem cells (hMSCs) seeded on the composite scaffolds with DM and cultured in basal media self-assembled into aggregates mimicking mesenchymal condensates during embryonic development. The DM composite scaffolds also induced higher expression of biochemical markers of cartilage development than controls, providing evidence for their translational application in the treatment of OCIs. The present study demonstrates the potential of direct incorporation of DM with thermoplastics for 3D printing of patient-specific scaffolds for osteochondral regeneration.

The effect of decellularized cartilage matrix scaffolds combined with endometrial stem cell-derived osteocytes on osteochondral tissue engineering in rats.

Since decellularized tissues may offer the instructive niche for cell differentiation and function, their use as cell culture scaffolds is a promising approach for regenerative medicine. To repair osteochondral tissues, developing a scaffold with biomimetic structural, compositional, and functional characteristics is vital. As a result of their heterogeneous structure, decellularized articular cartilage matrix from allogeneic and xenogeneic sources are considered appropriate scaffolds for cartilage regeneration. We developed a scaffold for osteochondral tissue engineering by decellularizing sheep knee cartilage using a chemical technique. DNA content measurements and histological examinations revealed that this protocol completely removed cells from decellularized cartilage. Furthermore, SEM, MTS assay, and H&E staining revealed that human endometrial stem cells could readily adhere to the decellularized cartilage, and the scaffold was biocompatible for their proliferation. Besides, we discovered that decellularized scaffolds could promote EnSC osteogenic differentiation by increasing bone-specific gene expression. Further, it was found that decellularized scaffolds were inductive for chondrogenic differentiation of stem cells, evidenced by an up-regulation in the expression of the cartilage-specific gene. Also, in vivo study showed the high affinity of acellularized scaffolds for cell adhesion and proliferation led to an improved regeneration of articular lesions in rats after 4weeks. Finally, a perfect scaffold with high fidelity is provided by the developed decellularized cartilage scaffold for the functional reconstruction of osteochondral tissues; these types of scaffolds are helpful in studying how the tissue microenvironment supports osteocytes and chondrocytes differentiation, growth, and function to have a good osteochondral repair effect.

Sequential growth factor exposure of human Ad-MSCs improves chondrogenic differentiation in an osteochondral biphasic implant.

Joint cartilage damage affects 10-12% of the world's population. Medical treatments improve the short-term quality of life of affected individuals but lack a long-term effect due to injury progression into fibrocartilage. The use of mesenchymal stem cells (MSCs) is one of the most promising strategies for tissue regeneration due to their ability to be isolated, expanded and differentiated into metabolically active chondrocytes to achieve long-term restoration. For this purpose, human adipose-derived MSCs (Ad-MSCs) were isolated from lipectomy and grown in xeno-free conditions. To establish the best differentiation potential towards a stable chondrocyte phenotype, isolated Ad-MSCs were sequentially exposed to five differentiation schemes of growth factors in previously designed three-dimensional biphasic scaffolds with incorporation of a decellularized cartilage matrix as a bioactive ingredient, silk fibroin and bone matrix, to generate a system capable of being loaded with pre-differentiated Ad-MSCs, to be used as a clinical implant in cartilage lesions for tissue regeneration. Chondrogenic and osteogenic markers were analyzed by reverse transcription-quantitative PCR and cartilage matrix generation by histology techniques at different time points over 40 days. All groups had an increased expression of chondrogenic markers; however, the use of fibroblast growth factor 2 (10 ng/ml) followed by a combination of insulin-like growth factor 1 (100 ng/ml)/TGFβ1 (10 ng/ml) and a final step of exposure to TGFβ1 alone (10 ng/ml) resulted in the most optimal chondrogenic signature towards chondrocyte differentiation and the lowest levels of osteogenic expression, while maintaining stable collagen matrix deposition until day 33. This encourages their possible use in osteochondral lesions, with appropriate properties for use in clinical patients.

The potential utility of hybrid photo-crosslinked hydrogels with non-immunogenic component for cartilage repair

Finding a suitable biomaterial for scaffolding in cartilage tissue engineering has proved to be far from trivial. Nonetheless, it is clear that biomimetic approaches based on gelatin (Gel) and hyaluronic acid (HA) have particular promise. Herein, a set of formulations consisting of photo-polymerizable Gel; photo-polymerizable HA, and allogenic decellularized cartilage matrix (DCM), is synthesized and characterized. The novelty of this study lies particularly in the choice of DCM, which was harvested from an abnormal porcine with α-1,3-galactose gene knockout. The hybrid hydrogels were prepared and studied extensively, by spectroscopic methods, for their capacity to imbibe water, for their behavior under compression, and to characterize microstructure. Subsequently, the effects of the hydrogels on contacting cells (in vitro) were studied, i.e., cytotoxicity, morphology, and differentiation through monitoring the specific markers ACAN, Sox9, Coll2, and Col2α1, hypertrophy through monitoring the specific markers alkaline phosphatase (ALP) and Col 10A1. In vivo performance of the hydrogels was assessed in a rat knee cartilage defect model. The new data expand our understanding of hydrogels built of Gel and HA, since they reveal that a significant augmenting role can be played by DCM. The data strongly suggest that further experimentation in larger cartilage-defect animal models is worthwhile and has potential utility for tissue engineering and regenerative medicine.

Regulatory effect of decellularized cartilage matrix on macrophage polarization

Regulatory effect of decellularized cartilage matrix on macrophage polarization

Bioprinting Via a Dual-Gel Bioink Based on Poly(Vinyl Alcohol) and Solubilized Extracellular Matrix towards Cartilage Engineering.

Various hydrogel systems have been developed as biomaterial inks for bioprinting, including natural and synthetic polymers. However, the available biomaterial inks, which allow printability, cell viability, and user-defined customization, remains limited. Incorporation of biological extracellular matrix materials into tunable synthetic polymers can merge the benefits of both systems towards versatile materials for biofabrication. The aim of this study was to develop novel, cell compatible dual-component biomaterial inks and bioinks based on poly(vinyl alcohol) (PVA) and solubilized decellularized cartilage matrix (SDCM) hydrogels that can be utilized for cartilage bioprinting. In a first approach, PVA was modified with amine groups (PVA-A), and mixed with SDCM. The printability of the PVA-A/SDCM formulations cross-linked by genipin was evaluated. On the second approach, the PVA was functionalized with cis-5-norbornene-endo-2,3-dicarboxylic anhydride (PVA-Nb) to allow an ultrafast light-curing thiol-ene cross-linking. Comprehensive experiments were conducted to evaluate the influence of the SDCM ratio in mechanical properties, water uptake, swelling, cell viability, and printability of the PVA-based formulations. The studies performed with the PVA-A/SDCM formulations cross-linked by genipin showed printability, but poor shape retention due to slow cross-linking kinetics. On the other hand, the PVA-Nb/SDCM showed good printability. The results showed that incorporation of SDCM into PVA-Nb reduces the compression modulus, enhance cell viability, and bioprintability and modulate the swelling ratio of the resulted hydrogels. Results indicated that PVA-Nb hydrogels containing SDCM could be considered as versatile bioinks for cartilage bioprinting.

Cell-free decellularized cartilage extracellular matrix scaffolds combined with interleukin 4 promote osteochondral repair through immunomodulatory macrophages: In vitro and in vivo preclinical study

Cartilage regeneration is a complex physiological process. Synovial macrophages play a critical immunomodulatory role in the acute inflammatory response surrounding joint injury. Due to the contrasting differences and heterogeneity of macrophage, the phenotype of macrophages are the key determinants of the healing response after cartilage injury. Biomaterials derived from extracellular matrix have been used for the repair and reconstruction of a variety of tissues by modulating the host macrophage response. However, the immunomodulatory effect of decellularized cartilage extracellular matrix (ECM) on macrophages has not been elucidated. It is necessary to clarify the immunomodulatory properties of decellularized cartilage matrix (DCM) to guide the design of cartilage regeneration materials. Here, we prepared porcine articular cartilage derived DCM and determined the response of mouse bone marrow-derived macrophages (BMDMs) to the pepsin-solubilized DCM (PDCM) in vitro. Macrophages activated by the PDCM could promote bone marrow-derived mesenchymal stem cells (BMSCs) invasion, migration, proliferation, and chondrogenic differentiation. Then, we verified that early optimization of the immunomodulatory effects of the cell-free DCM scaffold using IL-4 in vivo could achieve good cartilage regeneration in a rat knee osteochondral defect model. Therefore, this decellularized cartilage ECM scaffold combined with accurate and active immunomodulatory strategies provides a new approach for the development of cartilage regeneration materials. Statement of significanceThis work reports a decellularized cartilage extracellular matrix (DCM) scaffold combined with an accurate and active immunomodulatory strategy to improve cartilage regeneration. Our findings demonstrated that the pepsin-solubilized DCM (PDCM) activated bone marrow-derived macrophages to polarize to a constructive macrophage phenotype. These polarized macrophages promoted bone marrow-derived mesenchymal stem cell invasion, migration, proliferation, and chondrogenic differentiation. DCM scaffolds combined with early-stage intra-articular injection of IL-4 created a wound-healing microenvironment and improved cartilage regeneration in a rat knee osteochondral defect model.

A Biomimetic Biphasic Scaffold Consisting of Decellularized Cartilage and Decalcified Bone Matrixes for Osteochondral Defect Repair.

It is challenging to develop a biphasic scaffold with biomimetic compositional, structural, and functional properties to achieve concomitant repair of both superficial cartilage and subchondral bone in osteochondral defects (OCDs). This study developed a biomimsubchondraletic biphasic scaffold for OCD repair via an iterative layered lyophilization technique that controlled the composition, substrate stiffness, and pore size in each phase of the scaffold. The biphasic scaffold consisted of a superficial decellularized cartilage matrix (DCM) and underlying decalcified bone matrix (DBM) with distinct but seamlessly integrated phases that mimicked the composition and structure of osteochondral tissue, in which the DCM phase had relative low stiffness and small pores (approximately 134 μm) and the DBM phase had relative higher stiffness and larger pores (approximately 336 μm). In vitro results indicated that the biphasic scaffold was biocompatible for bone morrow stem cells (BMSCs) adhesion and proliferation, and the superficial DCM phase promoted chondrogenic differentiation of BMSCs, as indicated by the up-regulation of cartilage-specific gene expression (ACAN, Collagen II, and SOX9) and sGAG secretion; whereas the DBM phase was inducive for osteogenic differentiation of BMSCs, as indicated by the up-regulation of bone-specific gene expression (Collagen I, OCN, and RUNX2) and ALP deposition. Furthermore, compared with the untreated control group, the biphasic scaffold significantly enhanced concomitant repair of superficial cartilage and underlying subchondral bone in a rabbit OCD model, as evidenced by the ICRS macroscopic and O’Driscoll histological assessments. Our results demonstrate that the biomimetic biphasic scaffold has a good osteochondral repair effect.

Intra-articular injection of decellularized extracellular matrices in the treatment of osteoarthritis in rabbits.

BackgroundWe investigated the role of decellularized cartilage matrix in osteoarthritis to seek a new treatment for this disease.MethodsKnee cartilage from rabbits was decellularized and the degree of decellularization was assessed. A grinder was used to turn acellular cartilage into particles, which were then used in a suspension. Thirty New Zealand white rabbits were subjected to an operation on their anterior cruciate ligament for the osteoarthritis model. The success of the animal model of osteoarthritis was evaluated using results from six rabbits. The remaining 24 rabbits were randomly divided into four groups (groups A, B, C, and D). Rabbits in groups A, B, C, and D were injected with 200 µl of normal saline, 200 µl of 10% (w/v) cartilage decellularized suspension, 200 µl of 20% (w/v) cartilage decellularized suspension, and 200 µl of 40% (w/v) cartilage decellularized suspension into the knee joints, respectively. Macroscopic and microscopic assessments were performed three months after surgery to assess the degree of osteoarthritic changes.ResultsHistological and biochemical analysis revealed that the cartilage decellularized matrix removed cells after decellularization but retained components of collagen and glycosaminoglycan. Group A exhibited the most significant changes from osteophyte and cartilage erosion, which was macroscopically observable on the surface of the femoral cartilage. HE staining in group A revealed damage to the cartilage surface, disorganized chondrocytes, and spontaneous fibrocartilage formation. Safranin O-fast green staining revealed a cavity formed at the osteochondral junction in group A that did not appear in other groups.ConclusionOur study shows that decellularized cartilage matrix has a certain therapeutic effect on osteoarthritis and provides new insights in the treatment of osteoarthritis.

Decellularized cartilage matrix scaffolds with laser-machined micropores for cartilage regeneration and articular cartilage repair

Decellularized allogeneic and xenogeneic articular cartilage matrix scaffolds (CMS) are considered ideal scaffolds for cartilage regeneration owing to their heterogeneous architecture, and biochemical and biomechanical properties of native articular cartilage. However, the dense structure of the articular cartilage extracellular matrix, particularly the arrangement of collagen fibers, limits cellular infiltration, leading to poor cartilage regeneration. In addition, the incomplete removal of xenograft cells is associated with immunogenic reaction in the host. To facilitate the migration of chondrocytes into scaffolds and the rate of decellularization processing, we applied a carbon dioxide laser technique to modify the surface of porcine CMS while retaining major properties of the scaffold. By optimizing the laser parameters, we introduced orderly, lattice-arranged conical micropores of suitable depth and diameter onto the cartilage scaffold surface without affecting the cartilage shape or mechanical properties. We found that laser-modified CMS (LM-CMS) could enhance the degree of decellularization and were conducive to cell adhesion, as compared with the intact CMS. Decellularized scaffolds were seeded with rabbit-derived chondrocytes and cultured for 8 weeks in vitro. We found that cell-scaffold constructs formed cartilage-like tissue within the micropores and on the scaffold surface. In vivo, we found that cell-scaffold constructs subcutaneously implanted into the flanks of nude mice formed ivory-white neocartilage with high contents of DNA and cartilage matrix components, as well as good mechanical strength as compared with native CMS. Furthermore, scaffolds combined with autogenous chondrocytes induced neocartilage and better structural restoration at 8 weeks after transplantation into rabbit knee articular cartilage defects. In conclusion, decellularized xenogeneic CMS with laser-machined micropores offers an ideal scaffold with high fidelity for the functional reconstruction of articular cartilage.

Cartilage regeneration using decellularized cartilage matrix: Long-term comparison of subcutaneous and intranasal placement in a rabbit model

Autologous cartilage as donor tissue for various surgical reconstructions such as nasal septum regeneration is limited and associated with donor site morbidity. Our goal was to evaluate a new resorbable chondroconductive biomaterial made of decellularized porcine nasal septum cartilage compared with autologous native auricular cartilage as the gold standard. In order to examine the material and determine its long-term outcome further, we used subcutaneous implantation and septal implantation in an orthotopic rabbit model. In addition to non-seeded decellularized xenogenic cartilage, chondrocyte-seeded decellularized xenogenic cartilage was implanted as a septal replacement. After a three- or six-month period, the formation of newly synthesized cartilage extracellular matrix was evaluated immunohistochemically, whereas septal integrity and biocompatibility were evaluated histologically. The formation of the implanted neoseptum and form stability was analyzed by using 7-Tesla Magnetic Resonance Imaging.Good biocompatibility with no excessive rejection was demonstrated in all groups. Long-term stable and reliable septal reconstruction could be achieved in the study groups with or without cell seeding with autologous auricular chondrocytes. Autologous cell seeding was advantageous only with regard to septal perforations. Thus, cell seeding provides a benefit regarding long-term stability. However, because of slightly better biocompatibility, less pronounced septum deviation and the markedly lower effort involved, the non-seeded scaffold is favoured for possible clinical application.

In Situ Articular Cartilage Regeneration through Endogenous Reparative Cell Homing Using a Functional Bone Marrow-Specific Scaffolding System.

In situ tissue regeneration by homing endogenous reparative cells to the injury site has been extensively researched as a promising alternative strategy to facilitate tissue repair. In this study, a promising scaffolding system DCM-RAD/SKP, which integrated a decellularized cartilage matrix (DCM)-derived scaffold with a functionalized self-assembly Ac-(RADA)4-CONH2/Ac-(RADA)4GGSKPPGTSS-CONH2 (RAD/SKP) peptide nanofiber hydrogel, was designed for repairing rabbit osteochondral defect. In vitro experiments showed that rabbit bone marrow stem cells migrated into and have higher affinity toward the functional scaffolding system DCM-RAD/SKP than the control scaffolds. One week after in vivo implantation, the functional scaffolding system DCM-RAD/SKP facilitated the recruitment of endogenous mesenchymal stem cells within the defect site. Moreover, gene expression analysis indicated that the DCM-RAD/SKP promoted chondrogenesis of the recruited cells. In vivo results showed that the DCM-RAD/SKP achieved superior hyaline-like cartilage repair and successful subchondral bone reconstruction. By contrast, the control groups mostly led to fibrous tissue repair. These findings indicate that the DCM-RAD/SKP can recruit endogenous stem cells into the site of cartilage injury and promote differentiation of the infiltrating cells into the chondrogenic lineage, holding great potential as a one-step surgery strategy for cartilage repair.

Microspheres containing decellularized cartilage induce chondrogenesis in vitro and remain functional after incorporation within a poly(caprolactone) filament useful for fabricating a 3D scaffold

In this study, articular cartilage was decellularized preserving a majority of the inherent proteins, cytokines, growth factors and sGAGs. The decellularized cartilage matrix (dCM) was then encapsulated in poly(lactic acid) microspheres (MS + dCM) via double emulsion. Blank microspheres without dCM, MS(-), were also produced. The microspheres were spherical in shape and protein encapsulation efficiency within MS + dCM was 63.4%. The sustained release of proteins from MS + dCM was observed over 4 weeks in vitro. Both MS + dCM and MS(-) were cytocompatible. The sustained delivery of retained growth factors and cytokines from MS + dCM promoted cell migration in contrast to MS(-). Subsequently, chondrogenesis of human mesenchymal stem cells was upregulated in presence of MS + dCM as evidenced from immunohistochemistry, biochemical quantification and qPCR studies. Specifically, collagen II, aggrecan and SOX 9 gene expression were increased in the presence of MS + dCM by an order or more in magnitude compared to MS(-) with concomitant downregulation of hypertrophic genes (COL X) despite being cultured in the absence of chondrogenic media, (p < 0.05). Lastly, microspheres containing alkaline phosphatase (MS + ALP), a surrogate to assess the thermal stability of dCM proteins, incorporated within poly(caprolactone) filaments showed that the enzyme remained functional after filament production by melt extrusion. The establishment of a novel, thermally stable process for producing filaments containing chondroinductive microspheres provides evidence supporting subsequent development of a clinically-relevant, 3D scaffold fabricated from them for osteochondral regeneration and repair.

Fabrication of porous scaffolds with decellularized cartilage matrix for tissue engineering application

Due to the avascular nature of articular cartilage, damaged tissue has little capacity for spontaneous healing. Three-dimensional scaffolds have potential for use in tissue engineering approach for cartilage repair. In this study, bovine cartilage tissue was decellularized and chemically crosslinked hybrid chitosan/extracellular matrix (ECM) scaffolds were fabricated with different ECM weight ratios by simple freeze drying method. Various properties of chitosan/ECM scaffolds such as microstructure, mechanical strength, swelling ratio, and biodegradability rate were investigated to confirm improved structural and biological characteristics of chitosan scaffolds in the presence of ECM. The results indicated that by introducing ECM to chitosan, pore sizes in scaffolds with 1% and 2% ECM decreased and thus the mechanical properties were improved. The presence of ECM in the same scaffolds also improved the swelling ratio and biodegradation rate in the hybrid scaffolds. MTT cytotoxicity assays performed on chondrocyte cells cultured on chitosan/ECM scaffolds having various amounts of ECM showed that the greatest cell attachment belongs to the sample with intermediate ECM content (2% ECM). Overall, it can be concluded from all obtained results that the prepared scaffold with intermediate concentration of ECM could be a proper candidate for use in cartilage tissue engineering.

Physical characterization of decellularized cartilage matrix for reconstructive rhinosurgery

The use of autologous auricular and rib cartilage for the reconstruction of nasal defects and deformities is associated with a number of disadvantages. The development of alternative materials is therefore the focus of intensive research. Recent studies demonstrated that decellularized cartilage is a promising material for cartilage tissue engineering. Hence, the aim of this study was to characterize the materials surface and cellular reactions to the decellularized cartilage matrix in long term-3D-culture. Material geometry of decellularized cartilage was examined by microcomputed tomography as well as material characteristics by scanning and transmission electron microscopy. The expression of integrins on the surface of human chondrocytes was determined after seeding and migration into the scaffold. After decellularization an obvious enlargement of the matrix surface and an intensive interaction between the chondrocytes and the collagen matrix was observed. ITGA1 and ITGB1 were upregulated indicating chondrogenic differentiation. Therefore, decellularized porcine cartilage provides an optimal microstructure for human chondrocytes with respect to cell integration and matrix production. Thus, it offers promising characteristics for clinical application in reconstructive surgery.