A common-drain power amplifier (PA) for envelope tracking systems is presented. In envelope tracking, the main PA operates mostly in compression and the power supply rejection ratio (PSRR) is not high. Furthermore, the output noise of the supply modulator can be mixed with the RF signal and generates out-of-band emissions. In this article, instead of using a common-source topology, the PSRR of the envelope tracking PA is inherently improved by utilizing a common-drain topology. A comprehensive analysis shows that the common-drain topology is less sensitive to the supply noise, as compared to the conventional common-source topology. The proposed common-drain PA is implemented using a discrete LDMOS PD20010-E RF transistor. Measurement results show that the PSRR of the proposed common-drain PA is improved by up to 7 dB as compared to that of the common-source PA. For a two-tone input with 10 MHz bandwidth at the center frequency of 700 MHz, the power added efficiency (PAE) and IM3 of the envelope tracking common-drain PA are 20% and − 28 dBc, respectively, at an average output power of 33.4 dBm. The amplifier also shows a 12.4 dB power gain. Moreover, by utilizing the envelope tracking, the PAE is improved by more than 5%.