Change Detection In Data Research Articles

Sampling Error of Mean and Trend of Nighttime Air Temperature at Weather Stations Over China Using Satellite Data as Proxy

AbstractMeteorological observations of surface air temperature have provided fundamental data for climate change detection and attribution. However, the weather stations are unevenly distributed, and are still very sparse in remote regions. The possible sampling error is well known, but not well quantified because we are lack of the adequate and regularly distributed measurements. The high resolution of satellite land surface temperature retrieval during night time provide a nice proxy for near surface temperature as both temperatures controlled by surface longwave radiative cooling and the nocturnal temperature inversion depress land‐atmosphere turbulent exchange. The sampling error of mean value and trend were assessed by comparing station point measurements (pixel of ∼0.01°) with grid (1°) mean and national mean from 2001 to 2021. This method permits us to make the first assessment of under‐sampling error and spatial representative error on both national mean and trend of air temperature during nighttime collected at ∼2,400 weather stations over China. The sampling error in national mean temperature is more than 3°C. The under‐sampling error due to lack of observation explains two thirds and the spatial representative error due to the difference between station and grid/regional mean elevation contribute the other one third. The sampling error in trend account for one third of the national mean trend. The urban heat island effect associated with urbanization around the weather stations (spatial representative error) can explain four fifths of the sampling error in trend, which is consistent with existing studies based on air temperature collected at paired weather station.

Large-scale integration of remotely sensed and GIS road networks: A full image-vector conflation approach based on optimization and deep learning

Road networks play an important role in the sustainable development of human society. Conventionally, there are two sources of road data acquisition: road extraction from Remote Sensing (RS) imagery and GIS based map production. Each method has its limitations. The RS road extraction methods are primarily raster-based and the extracted roads are not directly usable in GIS due to their fragmented and noisy nature, while vector-based methods cannot utilize rich raster information. Further more, the vector and raster data can have discrepancies for various reasons. Efficient road data production requires an image-vector conflation process that can match and combine raster and vector-based road data automatically.In this study, we propose a full image-vector conflation framework that directly integrates image and vector road data by appropriately transforming extracted roads from imagery and establishing a match relation between these roads and a credible target GIS road dataset. Based on analyzing these match relations, we propose new metrics for measuring the degree of agreement between the raster and vector road data. The proposed framework combines state-of-the-art deep learning methods for image segmentation and optimization-based models for object matching. We prepared a large-scale high-resolution road dataset covering two counties in Kansas, US. Using trained models from one of the two counties, we were able to extract road segments in the other county and match them to the TIGER/Line roads.Our experiments show that conventional performance metrics for road extraction (e.g. IoU) are insufficient for measuring the degree of agreement between image and vector roads as they are pixel-based and are too sensitive to spatial displacement. Instead, the newly defined vector-based agreement metrics are needed for image-vector conflation purposes. Experiments show that, by the vector-based metrics, nearly 90% of GIS road lengths in the study area were extracted and over 90% of extracted roads matched the target GIS roads. The new framework streamlines raster-vector conflation of roads and can potentially expedite relevant geospatial analyses regarding change detection, disaster monitoring and GIS data production, among others.

D‐CDA: A Denoise and Change Detection Approach for Flood Disaster Location From SAR Images

AbstractFloods are among the most devastating natural disasters worldwide. Such disasters are often accompanied by strong precipitation and other weather factors, making it more difficult to identify affected areas. Moreover, synthetic aperture radar (SAR) technology can capture images in a 24‐hr window and penetrate clouds and fog. Change detection (CD) technology based on SAR images is generally utilized to locate disaster‐stricken areas by analyzing the differences between pre‐ and post‐disaster images. However, this method faces two main challenges: the presence of speckle noise, which reduces the difference detection accuracy, and the lack of a suitable SAR data set for flood disaster CD. Therefore, this study proposes a novel two‐stage approach for locating flood disaster areas, known as the denoising‐change detection approach (D‐CDA). The first stage comprises a nine‐layer denoising network with an encoder‐decoder structure known as the SAR denoising network (SDNet). It utilizes a multiresidual block and a parallel convolutional block attention module to extract features during the encoding process to suppress the noise component. In the second stage, a novel convolution neural network is proposed to detect the changes between bitemporal SAR images, namely, the coordinate attention fused network, which combines the siamese network and UNet++ as the backbone, and fuses coordinate attention modules to enhance the change features. Moreover, a CD data set (Zhengzhou flood data set) was constructed using Sentinel‐1 SAR images based on the 2021 flood disaster in Zhengzhou, China. Simulations verify the effectiveness of the proposed method. The experimental results indicate that D‐CDA achieves favorable detection performance in locating flood disaster areas.

Multiscale Change Detection Domain Adaptation Model Based on Illumination–Reflection Decoupling

In the change detection (CD) task, the substantial variation in feature distributions across different CD datasets significantly limits the reusability of supervised CD models. To alleviate this problem, we propose an illumination–reflection decoupled change detection multi-scale unsupervised domain adaptation model, referred to as IRD-CD-UDA. IRD-CD-UDA maintains its performance on the original dataset (source domain) and improves its performance on unlabeled datasets (target domain) through a novel CD-UDA structure and methodology. IRD-CD-UDA synergizes mid-level global feature marginal distribution domain alignment, classifier layer feature conditional distribution domain alignment, and an easy-to-hard sample selection strategy to increase the generalization performance of CD models on cross-domain datasets. Extensive experiments conducted on the LEVIR, SYSU, and GZ optical remote sensing image datasets demonstrate that the IRD-CD-UDA model effectively mitigates feature distribution discrepancies between source and target CD data, thereby achieving optimal recognition performance on unlabeled target domain datasets.

Multiomics and blood-based biomarkers of moyamoya disease: protocol of Moyamoya Omics Atlas (MOYAOMICS)

BackgroundMoyamoya disease (MMD) is a rare and complex cerebrovascular disorder characterized by the progressive narrowing of the internal carotid arteries and the formation of compensatory collateral vessels. The etiology of MMD remains enigmatic, making diagnosis and management challenging. The MOYAOMICS project was initiated to investigate the molecular underpinnings of MMD and explore potential diagnostic and therapeutic strategies.MethodsThe MOYAOMICS project employs a multidisciplinary approach, integrating various omics technologies, including genomics, transcriptomics, proteomics, and metabolomics, to comprehensively examine the molecular signatures associated with MMD pathogenesis. Additionally, we will investigate the potential influence of gut microbiota and brain-gut peptides on MMD development, assessing their suitability as targets for therapeutic strategies and dietary interventions. Radiomics, a specialized field in medical imaging, is utilized to analyze neuroimaging data for early detection and characterization of MMD-related brain changes. Deep learning algorithms are employed to differentiate MMD from other conditions, automating the diagnostic process. We also employ single-cellomics and mass cytometry to precisely study cellular heterogeneity in peripheral blood samples from MMD patients.ConclusionsThe MOYAOMICS project represents a significant step toward comprehending MMD’s molecular underpinnings. This multidisciplinary approach has the potential to revolutionize early diagnosis, patient stratification, and the development of targeted therapies for MMD. The identification of blood-based biomarkers and the integration of multiple omics data are critical for improving the clinical management of MMD and enhancing patient outcomes for this complex disease.

RESEARCH ON SELF-CROSS-TRANSFORMER MODEL OF POINT CLOUD CHANGE DETECTION

Abstract. With the vigorous development of the urban construction industry, engineering deformation or changes often occur during the construction process. To combat this phenomenon, it is necessary to detect changes in order to detect construction loopholes in time, ensure the integrity of the project and reduce labor costs. Or the inconvenience and injuriousness of the road. In the study of change detection in 3D point clouds, researchers have published various research methods on 3D point clouds. Directly based on but mostly based on traditional threshold distance methods (C2C, M3C2, M3C2-EP), and some are to convert 3D point clouds into DSM, which loses a lot of original information. Although deep learning is used in remote sensing methods, in terms of change detection of 3D point clouds, it is more converted into two-dimensional patches, and neural networks are rarely applied directly. We prefer that the network is given at the level of pixels or points. Variety. Therefore, in this article, our network builds a network for 3D point cloud change detection, and proposes a new module Cross transformer suitable for change detection. Simultaneously simulate tunneling data for change detection, and do test experiments with our network.

Limitations in the use of Sentinel-1 data for morphological change detection in rivers

ABSTRACT The identification of morphological changes occurring along river channels is essential to support river process understanding, assess sediment budgets and evaluate the effectiveness of river management. Among available remote sensing techniques, space-borne synthetic aperture radar (SAR) could potentially provide a powerful complement to optical imagery for this task. However, very few studies have been carried out on the use of SAR datasets to study erosion and deposition processes in river channels. In this work, we investigate the potential of change detection analysis based on Sentinel-1 data, by comparing variations of radar backscattering to river morphology changes identified through high-resolution drone acquisitions. We considered a time series of two years of Sentinel-1 data relative to a period where, despite a moderate fluvial event occurred, morphological changes have been significantly detected in multitemporal drone point clouds. Satellite optical imagery (planet.com) and hydro-meteorological data were used to support the analysis and interpret results. The results show that the spatial and temporal resolution of Sentinel-1 is currently not suitable for accurate discrimination of morphological changes related to river dynamics at local scale. Other spaceborne sensors with sub-metric ground sampling distance and/or daily revisit time would be probably suitable; however, so far, this option would need the use of commercial solutions with a consistent increase of the costs of the investigation.

A Review of Practical AI for Remote Sensing in Earth Sciences

Integrating Artificial Intelligence (AI) techniques with remote sensing holds great potential for revolutionizing data analysis and applications in many domains of Earth sciences. This review paper synthesizes the existing literature on AI applications in remote sensing, consolidating and analyzing AI methodologies, outcomes, and limitations. The primary objectives are to identify research gaps, assess the effectiveness of AI approaches in practice, and highlight emerging trends and challenges. We explore diverse applications of AI in remote sensing, including image classification, land cover mapping, object detection, change detection, hyperspectral and radar data analysis, and data fusion. We present an overview of the remote sensing technologies, methods employed, and relevant use cases. We further explore challenges associated with practical AI in remote sensing, such as data quality and availability, model uncertainty and interpretability, and integration with domain expertise as well as potential solutions, advancements, and future directions. We provide a comprehensive overview for researchers, practitioners, and decision makers, informing future research and applications at the exciting intersection of AI and remote sensing.

Use of LiDAR drone data for O-mapping and change detection in mountainous areas

Use of LiDAR drone data for O-mapping and change detection in mountainous areas

Fusion of VNIR Optical and C-Band Polarimetric SAR Satellite Data for Accurate Detection of Temporal Changes in Vegetated Areas

In this paper, we propose a processing chain jointly employing Sentinel-1 and Sentinel-2 data, aiming to monitor changes in the status of the vegetation cover by integrating the four 10 m visible and near-infrared (VNIR) bands with the three red-edge (RE) bands of Sentinel-2. The latter approximately span the gap between red and NIR bands (700 nm–800 nm), with bandwidths of 15/20 nm and 20 m pixel spacing. The RE bands are sharpened to 10 m, following the hyper-sharpening protocol, which holds, unlike pansharpening, when the sharpening band is not unique. The resulting 10 m fusion product may be integrated with polarimetric features calculated from the Interferometric Wide (IW) Ground Range Detected (GRD) product of Sentinel-1, available at 10 m pixel spacing, before the fused data are analyzed for change detection. A key point of the proposed scheme is that the fusion of optical and synthetic aperture radar (SAR) data is accomplished at level of change, through modulation of the optical change feature, namely the difference in normalized area over (reflectance) curve (NAOC), calculated from the sharpened RE bands, by the polarimetric SAR change feature, achieved as the temporal ratio of polarimetric features, where the latter is the pixel ratio between the co-polar and the cross-polar channels. Hyper-sharpening of Sentinel-2 RE bands, calculation of NAOC and modulation-based integration of Sentinel-1 polarimetric change features are applied to multitemporal datasets acquired before and after a fire event, over Mount Serra, in Italy. The optical change feature captures variations in the content of chlorophyll. The polarimetric SAR temporal change feature describes depolarization effects and changes in volumetric scattering of canopies. Their fusion shows an increased ability to highlight changes in vegetation status. In a performance comparison achieved by means of receiver operating characteristic (ROC) curves, the proposed change feature-based fusion approach surpasses a traditional area-based approach and the normalized burned ratio (NBR) index, which is widespread in the detection of burnt vegetation.

Change Detection Based on Supervised Contrastive Learning for High-Resolution Remote Sensing Imagery

Change detection (CD) is a challenging task on high-resolution bitemporal remote sensing images. Many recent studies of CD have focused on designing fully convolutional Siamese network architectures. However, most of these methods initialize their encoders by random values or an ImageNet pretrained model, without any prior for the CD task, thus limiting the performance of the CD model. In this article, the novel supervised contrastive pretraining and fine-tuning CD (SCPFCD) framework, which is made up of two cascaded stages, is presented to train a CD network based on a pretrained encoder. In the first supervised contrastive pretraining stage, the encoder of the Siamese network is asked to solve a joint pretext task introduced by the proposed CDContrast pretraining method on labeled CD data. The proposed CDContrast pretraining method includes land contrastive learning (LCL), which is based on supervised contrastive learning, and proxy CD learning. The LCL focuses on learning the spatial relationships among the land cover from bitemporal images by solving a land contrast task, while the proxy CD learning performs a proxy CD task on the top of the upsampling projector to avoid local optima for the LCL and learn features for the CD. Then, in the second fine-tuning stage, the whole Siamese network initialized with the pretrained encoder is fine-tuned to perform the CD task in an end-to-end manner. The proposed SCPFCD framework was verified with three CD datasets of high-resolution remote sensing images. The extensive experimental results consistently show that the proposed framework can effectively improve the ability to extract change information for Siamese networks.

A New Remote Sensing Change Detection Data Augmentation Method Based on Mosaic Simulation and Haze Image Simulation

A New Remote Sensing Change Detection Data Augmentation Method Based on Mosaic Simulation and Haze Image Simulation

High-Resolution Remote Sensing Bitemporal Image Change Detection Based on Feature Interaction and Multitask Learning

With the development of remote sensing technology, high-resolution (HR) remote sensing optical images have gradually become the main source of change detection data. Albeit, the change detection for HR remote sensing images still faces challenges: 1) in complex scenes, a region contains a large amount of semantic information, which makes it difficult to accurately locate the boundaries between different semantics in the feature maps and 2) due to the inability to maintain consistent conditions such as light, weather, and other factors when acquiring bitemporal images, confounding factors such as the style of bitemporal data that are not related to change detection can cause detection difficulties. Therefore, a change detection method based on feature interaction and multitask learning (FMCD) is proposed in this article. To improve the ability to detect changes in complex scenes, FMCD models the context information of features through a multilevel feature interaction module, so as to obtain representative features, and to improve the sensitivity of the model to changes, the interaction between two temporal features is realized through the mix attention block (MAB). In addition, to eliminate the influence of weather and other factors, FMCD adopts a multitask learning strategy, takes domain adaptation as an auxiliary task, and maps the features of bitemporal images to the same space through the feature relationship adaptation module (FRAM) and feature distribution adaptation module (FDAM). Experiments on three datasets show that the proposed method is superior to other state-of-the-art methods.

You cannot "count" how many items people remember in visual working memory: The importance of signal detection-based measures for understanding change detection performance.

Change detection tasks are commonly used to measure and understand the nature of visual working memory capacity. Across three experiments, we examine whether the nature of the memory signals used to perform change detection are continuous or all-or-none and consider the implications for proper measurement of performance. In Experiment 1, we find evidence from confidence reports that visual working memory is continuous in strength, with strong support for an equal variance signal detection model with no guesses or lapses. Experiments 2 and 3 test an implication of this, which is that K should confound response criteria and memory. We found K values increased by roughly 30% when criteria are shifted despite no change in the underlying memory signals. Overall, our data call into question a large body of work using threshold measures, like K, to analyze change detection data. This metric confounds response bias with memory performance and is inconsistent with the vast majority of visual working memory models, which propose variations in precision or strength are present in working memory. Instead, our data indicate an equal variance signal detection model (and thus, d')-without need for lapses or guesses-is sufficient to explain change detection performance. (PsycInfo Database Record (c) 2022 APA, all rights reserved).

EVALUATION OF SEVERAL FULLY CONVOLUTIONAL NETWORKS IN SAR IMAGE CHANGE DETECTION

Abstract. In recent years, the world is suffering from frequent natural disasters. Change detection (CD) technology can quickly identify the change information on the ground and has developed into an important means of disaster monitoring and assessment. Synthetic aperture radar (SAR) has the characteristics of periodic observation and wide coverage. Moreover, SAR has the advantages of penetrating, all-day and all-weather observation, which plays an important role in disaster monitoring. Due to the rapid development of satellite sensors, the available CD data has been greatly enriched. This situation provides an opportunity for deep learning change detection (DLCD) techniques. However, SAR data are affected by speckle noise and lack of available labeled samples, it remains challenging to precisely locate the change information with high efficiency. This paper focuses on several commonly used and outstanding networks in the DLCD field to evaluate their performance and develop them to SAR data. In addition, Transfer learning experiments are designed to evaluate the generalization performance of each network for the CD task. The experimental results show that the Siamese CD network encoding multi-temporal data separately has the best ability to detect changes and generalization performance. In addition, adding high quality explicit difference guidance information to the network is more specific for the CD task, which can further improve network performance and refine the boundaries of changed ground objects on change map.

An integrated approach for the assessment and monitoring of land degradation and desertification in semi-arid regions using physico-chemical and geospatial modeling techniques.

Land degradation (LD) and desertification are serious ecological, environmental, and social-economic threats in the world, and there is a demanding need to develop accountable and reproducible techniques to assess them at different scales. This study assesses LD and desertification with the help of remote sensing (RS) and geographical information system (GIS) in the study region for the period past 29 years, i.e., from 1990 to 2019. The severity of LD and desertification was assessed quantitatively by collecting twelve soil samples in the study region and analyzing the eleven soil physico-chemical parameters and these values have made correlated with digital number (DN) values with LANDSAT 8 OLI/TIRS satellite image. The land cover analysis of LANDSAT imagery revealed that the water body slightly increased from 0.29% in 1990 to 0.46% in 2019, and built-up-land increased from 2.87% in 1990 to 5.31% in 2019. Vegetation decreased from 52.03% in 1990 to 28.57%. Fallow land, degraded land, and desertified lands increased at alarming rates, respectively 13.71% to 26.35, 18.57% to 22.31%, and 12.53% to 17.00%. It is also established that the multi-temporal analysis of change detection data can provide a sophisticated measure of ecosystem health and variation, and that, over the last 29 years, considerable progress has been made in the respective research.

A high-resolution map of coastal vegetation for two Arctic Alaskan parklands: An object-oriented approach with point training data.

Bering Land Bridge National Preserve and Cape Krusenstern National Monument in northwest Alaska have approximately 1600 km of predominantly soft-sediment coastlines along the Chukchi Sea, a shallow bay of the Arctic Ocean. Over the past decade, marine vessel traffic through the Bering Strait has grown exponentially to take advantage of new ice-free summer shipping routes, increasing the risk of oil spills in these fragile ecosystems. We present a high-resolution coastal vegetation map to serve as a baseline for potential spill response, restoration, and change detection. We segmented 663 km2 of high-resolution multispectral satellite images by the mean-shift method and collected 40 spectral, topographic and spatial variables per segment. The segments were classified using photo-interpreted points as training data, and verified with field based plots. Digitizing points, rather than polygons, and intersecting them with the segmentation allows for rapid collection of training data. We classified the map segments using Random Forest because of its high accuracy, computational speed, and ability to incorporate non-normal, high-dimensional data. We found creating separate classification models by each satellite scene gave highly similar results to models combining the entire study area, and that reducing the number of variables had little impact on accuracy. A unified, study area-wide Random Forest model for both parklands produced the highest accuracy of various models attempted. We mapped 18 distinct classes, with an out-of-bag error of 11.6%, resulting in an improvement to the past per-pixel classification of this coast, and in higher spatial and vegetation classification resolution. The resulting map demonstrates the utility of our point-based method and provides baseline data for incident preparedness and change detection. Elevation is highly correlated with the ordination of the vegetation types, and was the most important variable in all tested classification models. The vegetation classification brings together the largest amount of vegetation data for the Chukchi Sea coast yet documented.

Rockfall detection using LiDAR and deep learning

Rockfall risk management has traditionally been built upon scenarios based on statistical analysis of historic frequency-magnitude rockfall patterns which allows for an estimation of the return period of rockfalls within given ranges of magnitude. Τhe availability of rockfall databases is thereby of crucial importance to quantify rockfall activity. In recent years, engineering geologists have been able to leverage light detection and ranging (LiDAR) technology with automated change detection and clustering workflows, for spatially accurate rockfall monitoring and inventorization. This wealth of digital data generates new research prospects for the development of an artificial intelligence (AI) system able to analyze change detection sequences and map spatio-temporal rockfall patterns by precisely capturing the rock slope evolution in near-real-time. However, prerequisite to such an advancement is the need to efficiently automate the process of classifying surface changes corresponding to rockfall. This task typically requires intensive human effort and is prone to multiple sources of human error like subjectivity, expertise, and experience that may differ from person to person involved in a particular project. This paper investigates the potential of integrating sophisticated deep learning architectures into dynamic rockfall database population processes, with the goal of relieving experts from the daunting task of manually classifying rockfall events within large loads of change detection data. Deep neural networks based on the pioneering PointNet and PointNet++ architectures for 3D point cloud learning are developed for this purpose based on a 5-year change detection database consisting of >8000 rock slope clusters of identified change for training, with scanning intervals ranging from 5 days to 6 months. The models are tested on the 536 clusters from the two last data acquisitions to simulate the real monitoring situation and subsequently on the most frequent of the campaigns to increase the probability of working with single-event clusters. The best-performing model achieves an accuracy of about 89% and 84% on the last and shortest campaign, respectively. The optimized deep learning models are further evaluated on a geologically different rockfall database achieving almost 93% accuracy in a location where discrete geomorphologic features such as steep rock outcrops and erosion channels are present. The study shows that although it is challenging to achieve generalization in rockfall detection, site-specific training of the proposed deep learning architecture can lead to high-level performance and support further advancements in rockfall risk management.

Hypothesis tests with functional data for surface quality change detection in surface finishing processes

This work is concerned with providing a principled decision process for stopping or tool-changing in a surface finishing process. The decision process is supposed to work for products of non-flat geometry. The solution is based on conducting hypothesis testing on the bearing area curves from two consecutive stages of a surface finishing process. In each stage, the bearing area curves, which are in fact the nonparametric quantile curves representing the surface roughness, are extracted from surface profile measurements at a number of sampling locations on the surface of the products. The hypothesis test of these curves informs the decision makers whether there is a change in surface quality induced by the current finishing action. When such change is detected, the current action is deemed effective and should thus continue, while when no change is detected, the effectiveness of the current action is then called into question, signaling possibly some change in the course of action. Application of the hypothesis testing-based decision procedure to both spherical and flat surfaces demonstrates the effectiveness and benefit of the proposed method and confirms its geometry-agnostic nature.

A BUILDING CHANGE DETECTION METHOD BASED ON A SINGLE ALS POINT CLOUD AND A HRS IMAGE

Abstract. For common remote sensing image change detection based on different time phases, it is difficult to solve the problem of surface tilt caused by the different shooting angle and time, which makes it difficult to complete the accurate registration. Some scholars utilized three-dimensional data for change detection to avoid registration problem, however, it costs very high for using 3D data to detect changes. Aim at this problem, this paper proposes a method of combining a single phase of ALS (Airborne Laser Scanning) data and HRS (High Resolution Satellite) image. It is composed of the following four steps: (1) Extracting the shadow area of the new-phase optical image, and superimposing it with the classified old-time point cloud data, and then the disappeared building area and the approximate building area are obtained according to the associated relationship between the shadow area and buildings. (2) Determining the unchanged building areas as positive samples, and taking the remaining area and vegetation area after removing the approximate buildings from the image as negative samples, and then GrabCut algorithm is used to segment new-phase HRS images to obtain building areas. (3) Comparing between building areas obtained in the previous step and the registered old-time ALS data to obtain a new building area with noise. (4) Denoising the results of the previous step to obtain the final new building area. Two datasets are used to verify the method. The detection accuracy of the disappeared buildings is over 85%, and the detection accuracy of the newly added buildings is over 70%.