항공기 부품에 대한 손상허용해석은 구조적 안전성 및 신뢰성 보장을 위해 면밀히 평가되어야한다. 손상허용기법은 항공기 주구조의 피로 설계기법으로 초기균열의 존재를 고려하여 피로수명을 산정한다. 따라서 손상허용해석에서는 피로 균열성장 수명의 계산이 요구되며, 이를 바탕으로 부품의 점검시간 및 교체주기를 결정한다. 본 논문에서는 형상이 복잡한 터빈 휠에 대하여 손상허용해석을 수행하였다. 형상이 복잡한 구조의 균열성장수명평가 시에는 주요 변수인 응력확대계수의 식을 알기 어려워, 이를 유한요소해석으로 계산하므로 많은 시간이 요구된다. 이러한 문제를 해결하고자 특정 균열길이에 대한 응력확대계수를 유한요소해석으로 계산하고, 생성된 데이터의 회귀분석을 통해 응력확대계수의 근사모델을 생성하였다. 균열성장 수명은 근사모델의 적분으로 계산하였으며, 근사모델을 사용하여 균열성장 수명평가와 손상허용해석의 효율을 높일 수 있었다. The damage tolerance analysis is required to guarantee the structural safety and the reliability for aircraft components. The damage tolerance method, which evaluate the life considering the initial crack, considers a fatigue design model of the aircraft main structure. The fatigue crack growth life should be calculated in damage tolerance analysis and the inspection time to define the replacement cycle. In this paper, the damage tolerance analysis is performed for a turbine wheel which has complex geometry. The equation of the stress intensity factor for complex geometry is hard to know, so that they are usually processed by finite element analysis which takes long time. To solve this problem, the stress intensity factors at specified crack are obtained by the FEA and the crack growth life is evaluated using the surrogate model which is generated by the regression analysis of the FEA data. From the results, the efficiency of the crack growth life calculation and the damage tolerance analysis could be increased by taking the surrogate model.