Dairy Ingredients Research Articles

Phospholipid analysis in whey protein products using hydrophilic interaction high-performance liquid chromatography-evaporative light-scattering detection in an industry setting

The main objective of this work was to develop an analytical method that can be used in a dairy manufacturing facility for the quantitation of phospholipids in dairy products. Total lipids from a dairy matrix were obtained first by Folch extraction. The total lipid extract was then applied to a silica gel-based solid-phase extraction column, and triglycerides and other nonpolar lipids were separated from the phospholipids and sphingolipids. Quantitation was performed by hydrophilic interaction HPLC coupled to evaporative light-scattering detection using a quaternary separation method. The method was validated using a commercial whey protein phospholipid concentrate and was used to analyze phospholipid and sphingolipid composition in buttermilk, whey protein concentrate, whey protein phospholipid concentrate, and several other dairy ingredients. This method was sensitive and reproducible and can be used in the dairy industry as a research tool to develop new value-added dairy phospholipid products, then later as a standard protocol for quality assurance analysis of current and future products.

Consumer perception of the sustainability of dairy products and plant-based dairy alternatives

Plant-based dairy alternative beverage sales have increased in recent years. Plant-based dairy alternatives often advertise on a platform of sustainability and environmental commitment. To successfully position and market dairy products in this competitive environment, dairy companies must understand the consumer definition of and importance placed on sustainability, as well as communicate sustainability information effectively. The objective of this study was to characterize consumer perception of the sustainability of milk and dried dairy ingredients and their respective plant-based alternatives. Focus groups and 2 online surveys were conducted. In the first survey, maximum difference scaling was used to rank the importance of specific dairy product attributes to sustainability, along with an exercise in which respondents selected whether a fluid milk or protein powder product was sustainable. A follow-up survey included 2 exercises in which respondents selected whether generic dairy products or dried dairy ingredients were sustainable, natural, healthy, trustworthy, or ethical. Over half of dairy product consumers reported that they looked for sustainability-related information. Consumers who purchased both plant-based dairy alternative and dairy products placed a higher self-reported importance on sustainability than those who purchased dairy products only. Focus group and survey maximum difference scaling results identified 5 key attributes for sustainability: minimal carbon footprint/greenhouse gas emissions, few/no preservatives, animal happiness and welfare, and simple/minimal ingredients. Plant-based dairy alternatives followed by fluid milk and protein powders were considered more sustainable than dairy products, but package type and organic status also played a role in consumer sustainability perception. Product labels were the most common source of sustainability information, although consumers also sought information on websites affiliated and unaffiliated with dairy companies. There was cognitive overlap among the terms sustainable, natural, healthy, ethical, and trustworthy as they relate to dairy products, but consumers used the terms distinctly. Consumers perceived differences in these terms between general categories of dairy as well as among products in a specific dairy category. Dairy companies may be able to differentiate themselves by helping consumers make these choices by simplifying sustainability-related messaging and by maintaining open, transparent communication regarding sustainability.

Companion Animal Nutrition Symposia 2020 - A Review.

For the 2020 ASAS-CSAS Annual Meeting held in Madison, WI the Companion Animal nutrition section had three symposia to address “Food fraud and food safety in companion animal foods”, “Feeding behavior and management”, and “Dairy ingredients and their application in pet food”. As pets moved from the barn into homes, pet parents pay closer attention to dietary strategies and feeding practices that may improve pet health and longevity. Food safety is a key component to support health of pet animals and humans since they share the same environment, including areas devoted for food preparation and storage. Another key aspect is the use of novel and functional ingredients to improve health, for example the use of dairy products. While the health benefits associated with consumption of dairy ingredients (i.e., whey, kefir, yogurt) are known for humans, there is a need for further evaluation of the nutritional adequacy and functionality of these ingredients for companion animals. Finally, humanization of pets may have impacted their lives more than we thought, as the number of overweight and obese animals are rising. We explored some of the issues related to how the food could be a factor in contributing with obesity and strategies to help pets to lose weight.

Monitoring Viscosity and Total Solids Content of Milk Protein Concentrate Using an Inline Acoustic Flowmeter at Laboratory Scale.

Control of milk concentrate viscosity and total solids (TS) content prior to spray drying can improve dairy ingredient manufacture. However, the availability of hygienic and appropriately pressure rated process viscometers for inline monitoring of viscosity is limited. An acoustic flowmeter (FLOWave) is an inline process analytical technology (PAT) tool that measures changes in acoustic signals in response to changes in liquid properties (i.e., acoustic transmission (AT), acoustic impedance (AI), temperature and volume flowrate). In this study, an acoustic flowmeter is evaluated as an inline PAT tool for monitoring viscosity of milk protein concentrate (MPC85), protein and TS content of (MPC85), and standardised MPC (sMPC). Laboratory scale experiments were carried out at 45 °C for five different concentrations (4–21%) of MPC85 and sMPC. Results showed that AT decreased with an increase in MPC85 viscosity (e.g., AT was 98.79 ± 0.04% and 86.65 ± 0.17% for 4% and 21% TS content, respectively). Non-linear regression was carried out to develop a relationship between AT and offline viscosity (R2 (coefficient of determination) value = 0.97 and standard error of prediction = 1.86 mPa·s). AI was observed to increase at higher protein and TS content which was dependent on protein to total solid ratio (P_TSR). Multiple linear regression was carried out to develop the relationship between AI, protein content, TS content and P_TSR. Results demonstrated that AI could be used to monitor the protein and TS content of milk protein concentrate (R2 > 0.96). Overall this study demonstrated the potential of an inline acoustic flowmeter for monitoring process viscosity, protein and TS during dairy concentrate processing.

Qualitative and Quantitative Study of Glycosphingolipids in Human Milk and Bovine Milk Using High Performance Liquid Chromatography-Data-Dependent Acquisition-Mass Spectrometry.

Cerebrosides (Crb; including glucosylceramide and galactosylceramide) and lactosylceramide (LacCer) are structurally complex lipids found in many eukaryotic cell membranes, where they play important roles in cell growth, apoptosis, cell recognition and signaling. They are also found in mammalian milk as part of the milk fat globule membrane (MFGM), making milk an important dietary component for the rapidly growing infant. This study reports the development of a robust analytical method for the identification and characterization of 44 Crb and 23 LacCer molecular species in milk, using high performance liquid chromatography–tandem mass spectrometry in data-dependent acquisition mode. For the first time, it also compares the distributions of these species in human and bovine milks, a commercial MFGM-enriched dairy ingredient (MFGM Lipid 100) and commercial standards purified from bovine milk. A method for quantifying Crb and LacCer in milk using mass spectrometry in neutral loss scan mode was developed and validated for human milk, bovine milk and MFGM Lipid 100. Human milk was found to contain approximately 9.9–17.4 µg Crb/mL and 1.3–3.0 µg LacCer/mL, whereas bovine milk (pooled milk from a Friesian herd) contained 9.8–12.0 and 14.3–16.2 µg/mL of these lipids, respectively. The process used to produce MFGM Lipid 100 was shown to have enriched these components to 448 and 1036 µg/g, respectively. No significant changes in the concentrations of both Crb and LacCer were observed during lactation.

Functional Properties and Nutritional Quality of Processed Cheese Spreads Enriched with Black Rice Powder

Black rice has been reported to contain many bioactive compounds, protein, crude fiber, total carbohydrates and minerals with attractive purple color making it valuable component in dairy industries. Partial replacement of dairy ingredients by 2-6% black rice powder (BRP) to make functional processed cheese spreads (PCS) was investigated. Chemical composition, microbiological, rheological characteristics, total phenolic compounds (TPC), antioxidant activity (AA) and sensory evaluation of PCS were determined. Results showed that no significant difference was observed in dry matter and fat content between PCS and control sample however, the protein content was significantly decreased by addition of BRP. Adding different ratios of BRP in PCS increased the TPC and AA than control sample as fresh and throughout the cold storage period. Furthermore, fortification with BRP significantly affected the rheological characteristics of PCS. Inclusion of black rice powder at different concentrations in the PCSs mix had no noticeable effect on the microbiological quality. Sensory evaluation results revealed that using 2% BRP in PCS processing had higher acceptability compared with control sample. Thus, BRP could be incorporated in PCS to develop a product with acceptable functional, nutritional and sensory properties.

Effect of sodium triphosphate and sodium hexametaphosphate on properties of buffalo milk protein concentrate 60 (BMPC60) powder.

Milk protein concentrate (MPC) powders are high-protein, innovative dairy ingredients. Buffalo milk naturally contains higher concentrations of casein and calcium, which have adverse effect on solubility of MPC powders. Therefore, this study was undertaken to investigate the effect of Sodium triphosphate (STP) and Sodium hexametaphosphate (SHMP) addition in ultrafiltered retentate on physicochemical, functional and reconstitution properties, morphological characteristics and rheological behaviour of the resultant powder. Pasteurized buffalo skim milk (PBSM) was concentrated by ultrafiltration (UF) process to obtain 2.53 × UF retentate (2.53 × UFR) with 0.61 protein to total solids (TS) ratio. Compared to PBSM, ultrafiltration significantly increased (p < 0.05) calcium, protein and TS contents of 2.53 × UFR, but significantly decreased (p < 0.05) its heat stability. Addition of STP-SHMP mixture in 2.53 × UFR noticeably improved the solubility, flowability, water binding, oil binding, foaming capacity, foam and thermal stability and, viscosity of treated MPC60 powder over control powder. The DeBroukere (D43) mean, d50, specific surface area, span and water activity values of treated MPC60 powder were 94.96 ± 0.05, 78.33 ± 0.04µm, 715.93 ± 0.29m2 kg-1, 1.97 ± 0.01 and, 0.26 ± 0.01, respectively. Scanning electron micrograph showed the presence of different size powder particles without clustering. Rheological modelling of the reconstituted solution of treated MPC60 was very well described by Herschel-Bulkley model. Overall, this study established that addition of STP-SHMP salts mixer in 2.53 × UFR could improve the solubility of resultant buffalo milk based MPC60 powder.

Identification and Detection of Bioactive Peptides in Milk and Dairy Products: Remarks about Agro-Foods.

Food-based components represent major sources of functional bioactive compounds. Milk is a rich source of multiple bioactive peptides that not only help to fulfill consumers ‘nutritional requirements but also play a significant role in preventing several health disorders. Understanding the chemical composition of milk and its products is critical for producing consistent and high-quality dairy products and functional dairy ingredients. Over the last two decades, peptides have gained significant attention by scientific evidence for its beneficial health impacts besides their established nutrient value. Increasing awareness of essential milk proteins has facilitated the development of novel milk protein products that are progressively required for nutritional benefits. The need to better understand the beneficial effects of milk-protein derived peptides has, therefore, led to the development of analytical approaches for the isolation, separation and identification of bioactive peptides in complex dairy products. Continuous emphasis is on the biological function and nutritional characteristics of milk constituents using several powerful techniques, namely omics, model cell lines, gut microbiome analysis and imaging techniques. This review briefly describes the state-of-the-art approach of peptidomics and lipidomics profiling approaches for the identification and detection of milk-derived bioactive peptides while taking into account recent progress in their analysis and emphasizing the difficulty of analysis of these functional and endogenous peptides.

Determination of Lactose in Lactose-Free and Low-Lactose Milk, Milk Products, and Products Containing Dairy Ingredients by the LactoSens®R Amperometry Method: First Action 2020.01.

The AOAC Stakeholder Panel on Strategic Food Analytical Methods approved Standard Method Performance Requirements (SMPR®) 2018.009 for lactose in low-lactose or lactose-free milk, milk products, and products containing dairy ingredients. The LactoSens®R Method is a biosensor assay kit developed for the determination of lactose in a variety of lactose-free or low-lactose milk, dairy, and infant formula products produced with yeast-neutral lactases. In response to a call for methods, the LactoSensR method was validated in a single laboratory study with comparison to SMPR 2018.009. The LactoSensR method was evaluated for calibration, interference, repeatability, recovery, and robustness. In a method comparison study samples naturally containing low levels of lactose were evaluated using LactoSensR and an accredited high-performance anion-exchange chromatography with pulsed amperometric detection. Calibration with lactose standard solutions was shown to be linear and the method was shown to be free of interference from a variety of sugars, vitamins, alcohols, flavorings, and other compounds. Matrix studies, including 85 spiked materials, 55 products naturally containing lactose, and 13 reference materials, resulted in RSDr of 0-10.5% at 8-100 mg lactose/100 g and 0.2-5.4% at >100 mg lactose/100 g for milk and dairy products and 1.0-6.8% for infant formula, in compliance with SMPR 2018.009 with few exceptions. Recovery was 85.0-110.3% at 8-100 mg lactose/100 g and 85.6-109.7% at >100 mg lactose/100 g for milk and dairy products and 91.1-97.0% for infant formula, also meeting the performance requirements with few exceptions. The method was shown to be robust to changes in ambient temperature, sample temperature, and sample volume. The LactoSensR method compares favorably with the requirements of SMPR 2018.009 and should be adopted as a First Action AOAC Official MethodSM. The LactoSensR method is a fast, easy-to-use method that meets the requirements of SMPR 2018.009.

Impact of Dairy Ingredients on Wheat Flour Dough Rheology and Bread Properties

The incorporation of dairy ingredients, such as milk or acid whey in bread, is advantageous considering their functional properties and the positive effects on consumers’ health. The introduction of an ingredient in bread making process requires the evaluation of dough behavior and final product quality. Thus, the influence of water replacement by milk or acid whey on the characteristics of wheat flour dough and bread was studied. Dynamic rheological measurements were performed in order to evaluate the viscoelastic properties of dough. Compared to the control, an increase of the elastic character of dough for samples with milk and a decrease for those with acid whey was observed. The resistance to deformation decreased when water was substituted with more than 25% milk and increased for samples with up to 25% acid whey. Higher maximum gelatinization temperatures were obtained when water was substituted by milk or acid whey. Bread crumb presented higher firmness, lower volume and porosity for samples with dairy ingredients compared to the control, therefore, replacement levels lower than 25% were recommended in order to minimize this negative effect. Bread elasticity, chewiness, resilience, pores density and size were improved at replacement levels lower than 25%, while for the sensory characteristics of the specialty bread, high scores were obtained. These results can be helpful for processors, in order to develop and optimize bread with dairy ingredients.

Sustainability in the dairy industry: a systematic literature review.

The dairy industry can contribute to global food security in a sustainable way by efficiently converting milk into dairy ingredients and products, even though they are polluting on a large scale. In this context, this study aimed to conduct a systematic literature review on sustainable indicators and dairy industries. The methodology used has a qualitative and quantitative approach and its technical procedure was the systematic literature review. The bases of journals consulted, using the keywords "sustainability indicator" and "dairy industry" which resulted in 130 valid scientific articles. The main results show that the sustainability indicators in the dairy industry are emerging and lacking research; being found seven papers, that highlight 12 indicators of the environmental, 11 of the social and eight economic dimensions, that may be considered fragile and initial. The studied problems are related to wastewater treatment methods, electric power consumption, efficiency of the industrial plant, among others, and the benefits on the theme are related to solutions to the difficulties, such as electricity reduction, sustainable practices. Among others, it is concluded that the dairy industries address the sustainability theme since 2011, with an ambiguous trend, being found evidence of the fragility of the sustainability indicators was found, mainly in the initial stage of their conception, when considering holistic approach (triple bottom line).

Adapting blood glucose meter biosensors for the measurement of lactose in dairy ingredients

Commonly used lactose assays [enzymatic spectrophotometric absorbance (EZA) and HPLC] for dairy ingredients are relatively expensive and time consuming. A blood glucose meter (BGM)-based method has successfully been documented as a rapid lactose assay in milk. However, the BGM-based method has not been evaluated in dairy ingredients. The objective of this study was to evaluate the BGM-based lactose analysis method in whey-derived (WD) and skim milk-derived (SMD) ingredients. The study was carried out in 4 phases. In phase 1, the effect of pH and lactose concentrations on the BGM reading was investigated using a factorial design with 2 factors: pH (6.02-7.50) and lactose (0.2 or 0.4%). We found that BGM readings were significantly affected by lower pH values at both lactose levels. In phase 2, the effect of total solids and ingredient type was investigated using a factorial design with 2 factors: ingredient type (WD or SMD) and total solids (0-8%). It was observed that the BGM reading was significantly affected by ingredient type and total solids. Phase 3 involved developing a linear relationship between the BGM reading and the EZA reference method to ascertain the accuracy of the proposed BGM method. Different ingredient types (WD or SMD) and non-lactose solids (0.5-27%) model ingredient dilutions prepared over a range of lactose contents (0.08-0.62%) were measured using the BGM and EZA methods. The average absolute percentage bias difference between the BGM method and EZA reference method results for these model dilutions was found to be between 2.2 and 7.3%. In phase 4, 15 samples procured from commercial sources ranging from 0.01 to 81.9% lactose were evaluated using the BGM method and EZA reference method. The average absolute percentage bias difference for lactose results between the 2 methods ranged from 3.6 to 5.0% and 5.3 to 9.7% for well-performing and poorly performing meters, respectively. Overall, the BGM method is a promising tool for rapid and low-cost analysis of lactose in both high-lactose and low-lactose dairy ingredients.

Prevalence of Listeria species and L. monocytogenes in ready-to-eat foods in the West Pomeranian region of Poland: Correlations between the contamination level, serogroups, ingredients, and producers

Poland is one of the largest food producers in Europe, and the West Pomeranian region of Poland is a large producer of RTE food. Thus, the objective of this study was to determine the prevalence of Listeria sp. and L. monocytogenes (LM) in RTE foods manufactured by 13 selected Polish food producers whose processing plants are located in this region. In total, 650 samples of RTE foods, and 263 ingredients of salads and desserts were analyzed. Almost 18% of the RTE foods failed to meet the zero tolerance limit for Listeria, which means they should not be allowed for retail. LM was isolated from 13.5% of the samples, with counts of 10–100 CFU/g noted in half of them. Products with meat and dairy ingredients, and fish products, sandwiches, sprouts and sushi, were at the highest statistically significant risk of LM contamination. Four serogroups were identified among the LM isolated from RTE foods, of which the 4b-4d-4e serogroup was predominating. The samples most heavily contaminated with LM contained even 2 serogroups. Results were subjected to the cluster analysis and principal component analysis to determine correlations between food groups, food ingredients, producers, contamination level, and serogroups of LM.

Effect of milk fat globule membrane materials on the crystallization behaviour in dairy recombined cream

Milk fat globule membrane (MFGM) fragments were isolated from reconstituted buttermilk (BM-MFGM) and from buttermilk whey (whey-MFGM) and used to make recombined cream. Besides, the commercial dairy ingredient, Lacprodan® PL20, a material rich in milk polar lipids and proteins, was used as another MFGM source. Recombined cream was prepared by homogenizing 35% (w/w) anhydrous milk fat into an aqueous phase containing individual BM-MFGM, Whey-MFGM, Lacprodan® PL20, or buttermilk powder (BMP) or a mixture of MFGM materials and BMP (4:6, w/w). The effect of MFGM on the fat crystallization behaviour, shear-induced partial coalescence was investigated and compared to those of natural cream and recombined cream made with BMP. It was found that the physicochemical properties of recombined cream were strongly affected by the MFGM source. Shear-induced partial coalescence of WheyMFGM40 was slower compared to that of natural cream. Amongst the four emulsifier materials used in this study, Whey-MFGM showed a similar crystallization behaviour to natural cream.

Antifungal activity of fermented dairy ingredients: Identification of antifungal compounds

Fungi are commonly identified as the cause for dairy food spoilage. This can lead to substantial economic losses for the dairy industry as well as consumer dissatisfaction. In this context, biopreservation of fermented dairy products using lactic acid bacteria, propionibacteria and fungi capable of producing a large range of antifungal metabolites is of major interest. In a previous study, extensive screening was performed in vitro and in situ to select 3 dairy fermentates (derived from Acidipropionibacterium jensenii CIRM-BIA1774, Lactobacillus rhamnosus CIRM-BIA1952 and Mucor lanceolatus UBOCC-A-109193, respectively) with antifungal activity. The aim of the present study was to determine the main compounds responsible for this antifungal activity. Fifty-six known antifungal compounds as well as volatiles were targeted using different analytical methods (conventional LC and GC, GC–MS, LC-QToF). The most abundant antifungal compounds in P. jensenii-, L. rhamnosus- and M. lanceolatus-derived fermentates corresponded to propionic and acetic acids, lactic and acetic acids, and butyric acid, respectively. Many other antifungal compounds (organic acids, free fatty acids, volatile compounds) were identified but at lower levels. In addition, an untargeted approach using nano LC-MS/MS identified a 9-amino acid peptide derived from αs2-casein in the L. rhamnosus-derived fermentate. This peptide inhibited M. racemosus and R. mucilaginosa in vitro. This study provides new insights on the molecules involved in antifungal activities of food-grade microorganism fermentates which could be used as antifungal ingredients in the dairy industry.

One-pot synthesis of sweetening syrup from lactose

Lactose has become the main byproduct of many dairy products and ingredients. Current applications of lactose are insufficient to use the recovered lactose from manufacturing operations. Here we exemplified a new process for converting aqueous lactose into a sweeting syrup via one-pot synthesis. The synthesis consisted of two-steps: (1) enzymatic hydrolysis of lactose and (2) catalytic isomerization over MgO/SiO2. The hydrolysis of lactose over β-galactosidase converted 95.77 ± 0.67% of lactose into glucose and galactose. The catalytic isomerization was performed over MgO/SiO2 with different MgO loadings (10–40 wt.%). A battery of tests was conducted to characterize the different catalysts, including surface properties, basicity, and microstructure. The one-pot synthesis, enzymatic hydrolysis and catalytic isomerization over 20%-MgO/SiO2, converted 99.3% of lactose into a sweetening syrup made of glucose (30.48%), galactose (33.51%), fructose (16.92%), D-tagatose (10.54%), and lactulose (3.62%). The outcomes of this research present an opportunity for expanding the utilization of lactose.

Sensory Lexicons and Formation Pathways of Off-Aromas in Dairy Ingredients: A Review.

Consumers are becoming increasingly aware of the health benefits of dairy ingredients. However, products fortified with dairy proteins are experiencing considerable aroma challenges. Practices to improve the flavor quality of dairy proteins require a comprehensive understanding of the nature and origins of off-aroma. Unfortunately, existing information from the literature is fragmentary. This review presents sensory lexicons and chemical structures of off-aromas from major dairy ingredients, and it explores their possible precursors and formation mechanisms. It was found that similar chemical structures often contributed to similar off-aroma descriptors. Lipid degradation and Maillard reaction are two primary pathways that commonly cause aroma dissatisfaction. Traditional and novel flavor chemistry tools are usually adopted for off-aroma measurements in dairy ingredients. Strategies for improving aroma quality in dairy derived products include carefully selecting starting materials for formulations, and actively monitoring and optimizing processing and storage conditions.

Milk fat influences proteolytic enzyme activity of dairy Pseudomonas species

This study investigated the effect of growth conditions on proteolytic activity of six Pseudomonas strains, (Pseudomonas fragi DZ1, Pseudomonas koreensis DZ138, Pseudomonas rhodesiae DZ351, Pseudomonas fluorescens DZ390, Pseudomonas synxantha DZ832 and Pseudomonas lundensis DZ845), isolated from raw milk. The proteolytic activity of all Pseudomonas strains in dairy media (skim milk and whole milk) was significantly higher (p < 0.05) than in non-dairy media (TSB), with most activity from Pseudomonas grown in whole milk. The proteolytic activity from P. lundensis DZ845 grown in TSB with the addition of 5% (w/v) butter was higher than other dairy ingredients added to TSB and the amount of proteolytic activity increased with increasing concentrations of butter (from 5 to 15%). P. rhodesiae DZ351 showed little proteolytic activity in all TSB supplemented with dairy ingredients. Only four of the six strains produced one protease of 47 kDa when grown in TSB. However, all six strains were able to produce at least one type of proteases in milk medium. For P. lundensis DZ845, a 12% casein zymography gel revealed that the presence of butter could induce proteolytic activity. This is the first study showing the effect of milk fat (butter) on the proteolytic activity of Pseudomonas. This highlights the greater vulnerability of whole milk compared to skim milk to proteolytic activity.

Potential Health Benefits of Conjugated Linoleic Acid: An Important Functional Dairy Ingredient

Conjugated linoleic acid (CLA) refers to a class of positional and geometrical isomers of linoleic acid (cis-9, cis-12 octadecadienoic acid) having conjugate double bond system. CLA are synthesized in rumen of the ruminants by biohydrogenation of dietary fatty acids; and thus, can be obtained from dairy products as well as from the meat of sheep, lamb and other ruminants. Among the several isomers, c9, t11-CLA isomer is the most biologically active form and accounts approximately 80% of total isomers. A number of clinical and epidemiological studies have demonstrated the role of CLA as anti-atherogenic, anti-inflammatory, anti-oxidative, anti-carcinogenic, etc. Several researchers have suggested the positive association of CLA in weight management, hypercholesterolemia, immunomodulatory functions, and improved bone metabolism.

Extrusion processing of agri-horti and dairy products: A review

Extrusion processing is a versatile process used for producing kind of food products. Raw material ideal for extrusion processing are ingredients rich in starch and protein. In extrusion processing, properties of extrudates change due to thermo-mechanical operation in which moisture, pressure, temperature and mechanical shear are applied to starchy and proteinous raw material. Other ingredients such as cereals, pulses and byproduct of the grain milling, protein rich components, dietary fibres, fruit and vegetables’ extract, and dairy ingredients could be incorporated into extrudates for enhancing the nutritional properties of the product as well as for producing variety of food products. Fortification of these ingredients not only changes the nutritional profile but also alter the functional properties of the final extruded product. In this paper, effect of incorporation of these ingredients on the final characteristics of the extrudates has been reviewed.