Cytotoxicity Test Research Articles

Enhancing the Physicochemical Properties of Sodium Iodide-based Root Canal Filling Material with Lanolin Incorporation

This study aimed to enhance the physicochemical properties of sodium iodide-based root filling materials, particularly solubility. In earlier developmental stages, the iodoformcontaining paste exhibited high antibacterial efficacy but failed to meet only the solubility requirement among the ISO 6876 criteria. Therefore, this study focused on enhancing the physicochemical properties of the paste under development, particularly centering on reducing its solubility. Four experimental groups were established, including three control group. The previously developed D30 paste was named the Oil 33 group, and the control group was named the Vitapex® group. The Oil 50 group, in which the oil content was increased, and the Oil 45L group, in which lanolin was incorporated. The physical properties (solubility, pH, flowability, and film thickness) of the four pastes were evaluated according to the ISO 6876 standards. No significant differences were observed between the Oil 45L and Vitapex® groups in any of the physical property evaluations. While the Oil 33 and Oil 50 groups met the ISO 6876 standards for flowability and film thickness, the Oil 45L group met all the physical properties. However, reducing the overall oil content may be necessary to enhance the antimicrobial properties. The result of the physicochemical experiments showed that the Oil 45L group with the newly formulated composition and incorporated lanolin exhibited low solubility meeting the ISO 6876 standard of ≤ 3%. We were able to develop a paste with more stable solubility than previous iodide-based root-filling materials. Therefore, the oil content must be further adjusted to improve its antimicrobial properties. If other physical properties also meet the ISO 6876 standards and demonstrate excellent results in cytotoxicity tests, this root filling material could potentially replace existing options.

Correlation between biomedical and structural properties of Zn/Sr modified calcium phosphates.

This study investigates the correlation between the biomedical and structural properties of Zn/Sr-modified Calcium Phosphates (ZnSr-CaPs) synthesized via the sol-gel combustion method. X-ray diffraction (XRD) analysis revealed the presence of Ca10(PO4)6(OH)2 (HAp), CaCO3, and Ca(OH)2 phases in the undoped sample, while the additional phase, Ca3(PO4)2 (β-TCP) was formed in modified samples. X-ray absorption near-edge structure (XANES) analysis demonstrated the incorporation of Sr into the lattice, with a preference for occupying the Ca1 sites in the HAp matrix. The introduction of Zn, furthermore, led to the formation of ZnO and CaZnO2 species. The ZnSr-CaPs exhibited significant antibacterial activity attributed to the generation of reactive oxygen species by ZnO, the oxidation reaction of CaZnO2, and the presence of Sr ions. Cytotoxicity tests revealed a correlation between the variation in ZnO content and cellular viability, with lower ZnO concentrations corresponding to higher cell viability. Additionally, the cooperative effects of Zn and Sr ions were found to enhance the bioactivity of CaPs, despite ZnO hindering the apatite formation process. These findings contribute to the deep understanding of the diverse role in modulating the antibacterial, cytotoxic, and bioactive properties of ZnSr-CaPs, offering potential applications in the field of biomaterials.

Examination of cytotoxic and antimicrobial effect of whitening toothpastes: an in vitro study.

Toothpastes are widely used to protect oral and teeth health. This study aims to examine the cytotoxic and antimicrobial effects of whitening toothpastes. In this study, extracts were prepared according to ISO 10993-12:2021 standard (0.2 g/mL) using whitening and conventional toothpastes. The prepared extracts were added to human gingival fibroblast cell lines (HGF-1) in different dilutions (1:1, 1:2, 1:4, 1:8, 1:16, and 1:32) and a cytotoxicity test was performed. Antimicrobial analysis of toothpastes was performed on Streptococcus mutans, Staphylococcus aureus, and Candida albicans using the hole-plate diffusion method. Cell viability and microbial analysis data were examined using two-way analysis of variance (ANOVA) and Tukey post-hoc test (p < 0.05). Toothpastes with sodium lauryl sulfate (SLS) in their composition showed statistically more toxic effects (p < 0.05). The activated carbon toothpastes without SLS showed over 90% cell viability after dilution. Although the dilution rate of toothpastes containing SLS increased, cell viability remained below 70%. All toothpastes used in the study showed antimicrobial effects on S. mutans, S. aureus, and C. albicans. Toothpaste containing hydrogen peroxide and SLS produced more antibacterial effects than activated carbon, blue covarine, microparticles, and conventional toothpaste. SLS-containing toothpastes showed more toxicity on HGF-1 cells. Toothpaste containing hydroxyapatite did not show toxic effects on HGF-1 cells. SLS, sodium lauryl sarcosinate and hydrogen peroxide in toothpastes increase antimicrobial effects.

Multi-wall carbon Nanotube surface-based functional nanoparticles for stimuli-responsive dual pharmaceutical compound delivery.

Carbon nanotubes (CNTs) have the potential to serve as delivery systems for medicinal substances and gene treatments, particularly in cancer treatment. Co-delivery of curcumin (CUR) and Methotrexate (MTX) has shown promise in cancer treatment, as it uses fewer drugs and has fewer side effects. This study used MTX-conjugated albumin (BSA)-based nanoparticles (BSA-MTX) to enhance and assess the efficiency of CUR. In-vitro cytotoxicity tests, DLS, TEM, FTIR, UV/Vis, SEM, and DSC studies assessed the formulations' physical and chemical properties. The Proteinase K enzyme was used to severe amidic linkages between MTX and BSA. The findings demonstrated the efficacy of using ƒ-MWCNT-CUR-BSA-MTX as a vehicle for efficient co-delivery of CUR and MTX in cancer treatment. The MTT colorimetric method was used to evaluate the effect of chemical and medicinal compounds. Cell division was studied using the MTT method to investigate the effect of pure MWCNT, pure CUR, MTX-BSA, and ƒ-MWCNT-CUR-MTX-BSA. Studies on cell lines have shown that the combination of curcumin and MTX with CNT can increase and improve the effectiveness of both drugs against cancer. A combination of drugs curcumin and methotrexate simultaneously had a synergistic effect on MCF-7 cells, which indicated that these drugs could potentially be used as a strategy for both prevention and treatment of breast cancer. Also, ƒ-MWCNT-CUR-MTX-BSA was found to have a significant effect on cancer treatment with minimal toxicity compared to pure curcumin, pure MTX-BSA, MTX, and ƒ-MWCNT alone. Unique properties such as a high ratio of specific surface area to volume, high chemical stability, chemical adsorption ability, high capacity of drug and biomolecules of carbon nanotubes, as well as multiple drug loading at the same time The combination of ƒ-MWCNT-CUR-BSA MTX significantly impacts cancer therapy), are desirable as an alternative option for targeted drug delivery and high therapeutic efficiency.

Establishment of an at-line nanofractionation-based screening platform by coupling HPLC-MS/MS with high-throughput fluorescence polarization bioassay for natural SARS-CoV-2 fusion inhibitors

In this study, a novel at-line nanofractionation platform was established for screening SARS-CoV-2 fusion inhibitors from natural products for the first time by combining HPLC-MS/MS with high-throughput fluorescence polarization (FP) bioassay. A time-course FP bioassay in 384 well-plates was conducted in parallel with MS/MS to simultaneously obtain chemical and biological information of potential fusion inhibitors in Lonicerae Japonicae Flos (LJF) and Lianhua Qingwen capsules (LHQW). Semi-preparative liquid chromatography and orthogonal HPLC separation were employed to enrich and better identify the co-eluted components. After comprehensive evaluation and validation, 28 potential SARS-CoV-2 fusion inhibitors were screened out and identified. Several compounds at low micromolar activity were validated by in vitro inhibitory assay, molecular docking, cytotoxicity test, and pseudovirus assay. Moreover, four potential dual-target inhibitors against influenza and COVID-19 were discovered from LJF using this method, offering novel insights for the development of future pharmaceuticals targeting epidemic respiratory diseases.

Silencing of lncRNA UCA1 Reverses Doxorubicin Resistance of Breast Cancer Through Inhibiting PI3K/AKT/mTOR Signaling Pathway

AbstractThe role of silencing of long non coding RNA UCA1 gene in the development of resistance to doxorubicin in breast cancer was employed. We initially induced resistance to doxorubicin in MCF‐7 cells, reaching a level of 0.64 μM. Next, we employed the cytotoxicity test to assess the progression of doxorubicin resistance in both sensitive cells (MCF‐7/S) and the resistant cells (MCF‐7/Dox). IC50 values of MCF‐7/S and MCF‐7/Dox were determined as 1.65 μM and 128.5 μM, respectively. Then, UCA1 siRNA was transfected to MCF‐7/Dox and MCF‐7/S cells by lipofectamine method. After that, the expression levels of AKT1, PTEN, AKT2 and mTOR genes, which are involved in the PI3K/AKT/mTOR signaling pathway, were analyzed by qPCR. Finally, it was determined that the mRNA level of the UCA1 gene suppressed by siRNA was significantly decreased in MCF‐7/S and MCF‐7/Dox cells, except PTEN, compared to the control groups. These results emphasized that silencing of lncRNA UCA1 gene negatively regulates cell growth, differentiation and proliferation.

Radiofrequency enhances drug release from responsive nanoflowers for hepatocellular carcinoma therapy

Hepatocellular carcinoma (HCC) is the sixth most common malignant tumor and the third leading cause of cancer death worldwide. Most patients are diagnosed at an advanced stage, and systemic chemotherapy is the preferred treatment modality for advanced HCC. Curcumin (CUR) is a polyphenolic antineoplastic drug with low toxicity obtained from plants. However, its low bioavailability and poor solubility limit its functionality. In this study, radiofrequency- (RF) enhanced responsive nanoflowers (NFs), containing superparamagnetic ferric oxide nanoclusters (Fe3O4 NCs), – CUR layer, – and MnO2 (CUR-Fe@MnO2 NFs), were verified to have a thermal therapeutic effect. Transmission electron microscopy was used to characterize the CUR-Fe@MnO2 NFs, which appeared flower-like with a size of 96.27 nm. The in vitro experimental data showed that RF enhanced the degradation of CUR-Fe@MnO2 NFs to release Mn2+ and CUR. The cytotoxicity test results indicated that after RF heating, the CUR-Fe@MnO2 NFs significantly suppressed HCC cell proliferation. Moreover, CUR-Fe@MnO2 NFs were effective T1/T2 contrast agents for molecular magnetic resonance imaging due to the release of Mn2+ and Fe3O4 NCs.

Excellent Adsorption of Lead (II) and Chromium (VI) from Water Using Zwitterions (-NH3+ and -COO-) Functionalized Nano Lanthanum Oxide: Kinetic, Isotherm, Thermodynamic, and Surface Mechanism.

Zwitterion amino acid l-cysteine functionalized lanthanum oxide nanoparticles (l-Cyst-La2O3 NPs) have been synthesized for the first time with lanthanum acetate as the precursor, NH4OH as the base, and l-cysteine as the in situ functionalized mediator. The typical size of l-Cyst-La2O3 NPs was obtained in the range of 15-20 nm from the TEM technique. A cytotoxicity test of l-Cyst-La2O3 NPs was performed in Raw 264.7 cell lines, which were shown to be highly biocompatible. The point zero charge pH (pHPZC) of bare and l-Cyst functionalized La2O3 NPs was obtained at pH 6 and 2. The maximum uptake capacities of l-Cyst-La2O3 NPs at temperatures 25-45 °C were obtained as 137-282 mg/g for Pb2+ and 186-256 mg/g for Cr6+. All of these values are much higher than those reported in the literature with other nanomaterials. The presence of -SH, -NH2, and -COOH functional groups in zwitterion l-cysteine provides multiple binding sites leading to the high adsorption of Pb2+ and Cr6+. Five-cycle desorption studies were successfully performed to regenerate the spent l-Cyst-La2O3 NPs.

Silver and Copper Nanoparticle-Loaded Self-Assembled Pseudo-Peptide Thiourea-Based Organic-Inorganic Hybrid Gel with Antibacterial and Superhydrophobic Properties for Antifouling Surfaces.

The escalating threat of antimicrobial resistance has become a global health crisis. Therefore, there is a rising momentum in developing biomaterials with self-sanitizing capabilities and inherent antibacterial properties. Despite their promising antimicrobial properties, metal nanoparticles (MNPs) have several disadvantages, including increased toxicity as the particle size decreases, leading to oxidative stress and DNA damage that need consideration. One solution is surface functionalization with biocompatible organic ligands, which can improve nanoparticle dispersibility, reduce aggregation, and enable targeted delivery to microbial cells. The existing research predominantly concentrates on the advancement of peptide-based hydrogels for coating materials to prevent bacterial infection, with limited exploration of developing surface coatings using organogels. Herein, we have synthesized organogel-based coatings doped with MNPs that can offer superior hydrophobicity, oleophobicity, and high stability that are not easily achievable with hydrogels. The self-assembled gels displayed distinct morphologies, as revealed by scanning electron microscopy and atomic force microscopy. The cross-linked matrix helps in the controlled and sustained release of MNPs at the site of bacterial infection. The synthesized self-assembled gel@MNPs exhibited excellent antibacterial properties against harmful bacteria such as Escherichia coli and Staphylococcus aureus and reduced bacterial viability up to 95% within 4 h. Cytotoxicity testing against metazoan cells demonstrated that the gels doped with MNPs were nontoxic (IC50 > 100 μM) to mammalian cells. Furthermore, in this study, we coated the organogel@MNPs on cotton fabric and tested it against Gram +ve and Gram -ve bacteria. Additionally, the developed cotton fabric exhibited superhydrophobic properties and developed a barrier that limits the interaction between bacteria and the surface, making it difficult for bacteria to adhere and colonize, which holds potential as a valuable resource for self-cleaning coatings.

Cellulose fibres enhance the function of hemostatic composite medical sealants.

Tissue adhesives and sealants offer promising alternatives to traditional wound closure methods, but the existing trade-off between biocompatibility and strength is still a challenge. The current study explores the potential of a gelatin-alginate-based hydrogel, cross-linked with a carbodiimide, and loaded with two functional fillers, the hemostatic agent kaolin and cellulose fibres, to improve the hydrogel's mechanical strength and hemostatic properties for use as a sealant. The effect of the formulation parameters on the mechanical and physical properties was studied, as well as the biocompatibility and microstructure. The incorporation of the two functional fillers resulted in a dual micro-composite structure, with uniform dispersion of both fillers within the hydrogel, and excellent adhesion between the fillers and the hydrogel matrix. This enabled to strongly increase the sealing ability and the tensile strength and modulus of the hydrogel. The fibres' contribution to the enhanced mechanical properties is more dominant than that of kaolin. A combined synergistic effect of both fillers resulted in enhanced sealing ability (247%), tensile strength (400%), and Young's modulus (437%), compared to the unloaded hydrogel formulation. While the incorporation of kaolin almost did not affect the physical properties of the hydrogel, the incorporation of the fibres strongly increased the viscosity and decreased the gelation time and swelling degree. The cytotoxicity tests indicated that all studied formulations exhibited high cell viability. Hence, the studied new dual micro-composite hydrogels may be suitable for medical sealing applications, especially when it is needed to get a high sealing effect within a short time. The desired hemostatic effect is obtained due to kaolin incorporation without affecting the physical properties of the sealant. Understanding the effects of the formulation parameters on the hydrogel's properties enables the fitting of optimal formulations for various medical sealing applications.

Boosting the Anti-Infection Ability of Titanium Implants by Coating Polydopamine–Curcumin

To reduce the risk of infection, improving the anti-infection ability of Ti-based implantation has become a very meaningful task. In this work, by employing polydopamine (PDA) as a carrier and curcumin (CUR) as an anti-biotic/inflammatory, a series of Ti-PDA@CURx (x = 0.5, 1.0, 1.5, 2.0, 2.5) was successfully fabricated and characterized by scanning electron microscopy, Fourier transform infrared spectrometry, X-ray diffraction, X-ray photoelectron spectroscopy, and the water contact angle, where Ti plates were firmly coated by PDA@CUR. The test result of CUR content shows that the maximum loading of CUR in PDA can reach 0.6506%, where the CUR concentration is 1.5 mg/mL. The antibacterial test results demonstrate that Ti-PDA@CUR-x (x = 0.5, 1.0, 1.5, 2.0, 2.5) exhibit significant antibacterial activities against Escherichia coli and S. aureu, where Ti-PDA@CUR1.5 has the highest antibacterial rate of 62.7% against Escherichia coli and 52.6% against S. aureus. The cytotoxicity test shows that Ti-PDA, Ti-PDA@CUR-x (x = 0.5, 1.0, 1.5, 2.0, 2.5) has almost no toxicity.

Coating methotrexate-PLGA nanoparticles with folic acid-chitosan conjugate for cancer targeting

Background: Loading Methotrexate, a chemotherapeutic agent, in a nanocarrier can improve its efficacy and lower its side effects. Both PLGA and chitosan were used to formulate Methotrexate nanoparticles. Folate acts as a targeting ligand for anticancer medications. Therefore, folate, chitosan, and PLGA were used to deliver methotrexate. Methods: Folic acid and Chitosan (FA-CS) were conjugated and used to coat Methotrexate-PLGA nanoparticles. The conjugate and the nanoparticles were characterized using Zetasizer to test particle size, polydispersity and charge, SEM was used to test particles’ morphology. Both %EE and %LC of MTX in the NPs were measured. Finally, MTX release and the system cytotoxicity were tested in vitro. Results: FTIR, NMR, and XRD proved the successful formation of FA-CS, and the formation of the coated nanoparticles. The particles were spherical with a size ~385 nm, a disparity ~0.27, and a charge ~+15 mV. The %EE and the % LC were 79% and 21.2%, respectively. In vitro release studies revealed nearly complete MTX release after 48 h. In vitro cytotoxicity testing demonstrated that the formulation components are safe and that the incorporation of MTX within the nanoparticles enhanced the drug’s cytotoxic effect in comparison to the free drug. Conclusion: loading of MTX in the NPs enhances its chemotherapeutic effect, hence, this system can be used to target carcinogenic cells.

Antimicrobial efficacy of direct air gas soft jet plasma for the in vitro reduction of oral bacterial biofilms

The aim of this study was to evaluate the antimicrobial efficacy of an air gas soft jet CAP for its potential use in removing oral biofilms, given that plasma-based technologies have emerged as promising methods in periodontology. Two types of biofilms were developed, one by Streptococcus mutans UA 159 bacterial strain and the other by a complex mixture of saliva microorganisms isolated from a patient with periodontitis. This latter biofilm was characterized via Next Generation Sequencing to determine the main bacterial phyla. The CAP source was applied at a distance of 6 mm for different time points. A statistically significant reduction of both CFU count and XTT was already detected after 60 s of CAP treatment. CLSM analysis supported CAP effectiveness in killing the microorganisms inside the biofilm and in reducing the thickness of the biofilm matrix. Cytotoxicity tests demonstrated the possible use of CAP without important side effects towards human gingival fibroblasts cell line. The current study showed that CAP treatment was able to significantly reduce preformed biofilms developed by both S. mutans and microorganisms isolated by a saliva sample. Further studies should be conducted on biofilms developed by additional saliva donors to support the potential of this innovative strategy to counteract oral pathogens responsible for periodontal diseases.

Biodegradable Zn-2Cu-0.5Zr alloy promotes the bone repair of senile osteoporotic fractures via the immune-modulation of macrophages

Delayed bone-healing of senile osteoporotic fractures remains a clinical challenge due to the alterations caused by aging in bone and immune systems. The novel biomaterials that address the deficiencies in both skeletal cells and immune systems are required to effectively treat the bone injuries of older patients. Zinc (Zn) has shown promise as a biodegradable material for use in orthopedic implants. To address the bone-healing deficiencies in elderly patients with bone injuries, we developed a biodegradable Zn-based alloy (Zn–2Cu-0.5Zr) with enhanced mechanical properties, including a yield strength of 198.7 MPa and ultimate tensile strength of 217.6 MPa, surpassing those of pure Zn and Zn–2Cu alloys. Cytotoxicity tests conducted on bone marrow mesenchymal stem cells (BMSCs) and MC3T3-E1 cells demonstrated that the extracts from Zn–2Cu-0.5Zr alloy exhibited no observable cytotoxic effects. Furthermore, the extracts of Zn–2Cu-0.5Zr alloy exhibited significant anti-inflammatory effects through regulation of inflammation-related cytokine production and modulation of macrophage polarization. The improved immune-osteo microenvironment subsequently contributed to osteogenic differentiation of BMSCs. The potential therapeutic application of Zn–2Cu-0.5Zr in senile osteoporotic fracture was tested using a rat model of age-related osteoporosis. The Zn–2Cu-0.5Zr alloy met the requirements for load-bearing applications and accelerated the healing process in a tibial fracture in aged rats. The imaging and histological analyses showed that it could accelerate the bone-repair process and promote the fracture healing in senile osteoporotic rats. These findings suggest that the novel Zn–2Cu-0.5Zr alloy holds potential for influencing the immunomodulatory function of macrophages and facilitating bone repair in elderly individuals with osteoporosis.

Cytotoxicity and Biological Activities of Geopopolis Extract from the Stingless bee (Melipona scutellaris) in Isolates of Staphylococcus aureus.

Geopropolis resins are produced by stingless bees (Meliponinae), developed from the collection of resinous materials, waxes and exudates, from the flora of the region where stingless bees are present, in addition to the addition of clay or earth in its composition. Several biological activities are attributed to Ethanol Extracts of Geopropolis (EEGP). The bioactive properties are associated with the complex chemical composition that the samples have. This work aims to evaluate the biological activities of the EEGP, in order to contribute with a natural therapeutic alternative, to face infections, mainly those caused by resistant strains of Staphylococcus aureus. The EEGP MIC tests showed antibacterial activity against two strains of S. aureus, both at concentrations of 550 μg/mL. The MBC performed with the inhibition values showed that the EEGP has bacteriostatic activity in both strains. Biofilm inhibition rates exhibited an average value greater than 65 % at the highest concentration. The EEGP antioxidant potential test showed good antioxidant activity (IC50) of 11.05±1.55 μg/mL. In the cytotoxicity test against HaCat cells, after 24 hours, EEGP induced cell viability at the three tested concentrations (550 μg/mL: 81.68±3.79 %; 1100 μg/mL: 67.10±3.76 %; 2200 μg/mL: 67.40±1.86 %). In view of the above, the safe use of EEGP from the brazilian northeast could be proven by the cytotoxicity test, and its use as an antioxidant and antibacterial agent has proven to be effective, as an alternative in combating oxidative stress and microorganisms such as S. aureus, which, through the spread and ongoing evolution of drug resistance, generates an active search for effective solutions.

Nanoarchitectonics of Bactericidal Coatings Based on CaCO3-Nanosilver Hybrids.

Antimicrobial coatings provide protection against microbes colonization on surfaces. This can prevent the stabilization and proliferation of microorganisms. The ever-increasing levels of microbial resistance to antimicrobials are urging the development of alternative types of compounds that are potent across broad spectra of microorganisms and target different pathways. This will help to slow down the development of resistance and ideally halt it. The development of composite antimicrobial coatings (CACs) that can host and protect various antimicrobial agents and release them on demand is an approach to address this urgent need. In this work, new CACs based on microsized hybrids of calcium carbonate (CaCO3) and silver nanoparticles (AgNPs) were designed using a drop-casting technique. Polyvinylpyrrolidone and mucin were used as additives. The CaCO3/AgNPs hybrids contributed to endowing colloidal stability to the AgNPs and controlling their release, thereby ensuring the antibacterial activity of the coatings. Moreover, the additives PVP and mucin served as a matrix to (i) control the distribution of the hybrids, (ii) ensure mechanical integrity, and (iii) prevent the undesired release of AgNPs. Scanning electron microscopy (SEM), X-ray diffraction (XRD), and Fourier transform infrared (FTIR) techniques were used to characterize the 15 μm thick CAC. The antibacterial activity was determined against Escherichia coli, methicillin-resistant Staphylococcus aureus (MRSA), and Pseudomonas aeruginosa, three bacteria responsible for many healthcare infections. Antibacterial performance of the hybrids was demonstrated at concentrations between 15 and 30 μg/cm2. Unloaded CaCO3 also presented bactericidal properties against MRSA. In vitro cytotoxicity tests demonstrated that the hybrids at bactericidal concentrations did not affect human dermal fibroblasts and human mesenchymal stem cell viability. In conclusion, this work presents a simple approach for the design and testing of advanced multicomponent and functional antimicrobial coatings that can protect active agents and release them on demand.

Synthesis of Heterocyclic Ring-Fused Bisnoralcohol Derivatives as Novel Small-Molecule Antiosteoporosis Agents.

A series of heterocyclic ring-fused derivatives of bisnoralcohol (BA) were synthesized and evaluated for their inhibitory effects on RANKL-induced osteoclastogenesis. Most of these derivatives possessed potent antiosteoporosis activities in a dose-dependent manner. Among these compounds, 31 (SH442, IC50 = 0.052 μM) exhibited the highest potency, displaying 100% inhibition at 1.0 μM and 82.8% inhibition at an even lower concentration of 0.1 μM, which was much more potent than the lead compound BA (IC50 = 2.325 μM). Cytotoxicity tests suggested that the inhibitory effect of these compounds on RANKL-induced osteoclast differentiation did not result from their cytotoxicity. Mechanistic studies revealed that SH442 inhibited the expression of osteoclastogenesis-related marker genes and proteins, including TRAP, TRAF6, c-Fos, CTSK, and MMP9. Especially, SH442 could significantly attenuate bone loss of ovariectomy mouse in vivo. Therefore, these BA derivatives could be used as promising leads for the development of a new type of antiosteoporosis agent.

Total Synthesis of Bipenicilisorin and Assignment of the Absolute Configuration.

The first total synthesis of bipenicilisorin (1) isolated from Penicillium chrysogenum SCSIO 41001 via its monomer natural product, penicilisorin (2), was achieved. Penicilisorin was synthesized in four steps from a o-bromobenzaldehyde derivative via the Pd-catalyzed one-pot fluorocarbonylation/lactonization/β-elimination cascade reaction. Iodination of penicilisorin gave 7-iodopenicilisorin which was dimerized by Pd-catalyzed homodimerization to provide (±)-bipenicilisorin. The unknown absolute configuration of naturally occurring (+)-bipenicilisorin was examined by optical resolution of the (±)-synthetic bipenicilisorin and a comparison of experimental and theoretical electronic circular dichroism (ECD) spectra. These results support the absolute configuration of the natural product to be Sa. A cytotoxic activity test of (+)-and (-)-bipenicilisorin using A549 cells revealed that (+)-1 has a lower IC50 value than (-)-1.

Slightly degradable, naturally antibacterial hydrogel matrixes derived from polyvinyl alcohol and linear/branched-polyethyleneimine as a wound dressing material

PVA:PEI based film gels were prepared at various weight ratios, 10–100% of linear-PEI (L-PEI) and branched-PEI (B-PEI) to PVA as PVA:L-PEI or PVA:B-PEI to demonstrate the effect of PEI types on hydrolytic degradation, blood compatibility, antibacterial properties, and cytotoxicity. The hydrolytic degradation studies, done at ∼ skin pH, 5.4 and revealed that PVA:PEI-based film gels, 1:0.1 wt% are degradable with a gravimetric weight losses of16.80 ± 1.39% and 17.20 ± 1.21% up to 7 days, and decreased as the wt% of L-PEI and B-PEI were increased in the matrix. The blood compatibility assays done through hemolysis and blood clotting tests disclosed only PVA:B-PEI film gels at 1.0 mg/mL concentration were found blood compatible. The antimicrobial studies revealed that regardless of the types and weight ratio of L-PEI or B-PEI, all PVA:L-PEI and PVA:B-PEI based film gels possess a potent antibacterial activity against Pseudomonas aeruginosa, a gram-negative bacteria and Staphylococcus aureus, a gram-positive bacteria. Moreover, the cytotoxicity test results examined on the L929 cell line uncovered that only PVA:L-PEI and PVA:B-PEI even at very low concentrations of L-PEI or B-PEI, for example, PVA:L-PEI and PVA:B-PEI at 1:0.1 weight ratio film gel at 10 mg/mL show toxic effect, for example <50% cell viability suggesting lesser concentration use in biomedical applications.

Molecular Characterization and Potential Host-switching of Swine Farm associated Clostridioides difficile ST11

ObjectiveTo conduct molecular prevalence and genetic polymorphism analysis of 24 Swine Farm associated C. difficile ST11 strains, in addition to other representative sequenced ST strains. MethodsThe collected C. difficile strains underwent whole genome sequencing and bioinformatic analysis using the illumina NovaSeq platform, SPAdes, Prokka, MOB-suite, and FastTree. Virulence and antibiotic resistance genes were identified through NCBI Pathogen Database. Cytotoxicity tests were conducted on HT-29 cells and Vero cells to verify the function of toxin A and toxin B. ResultsThe most prevalent resistance genes in ST11 were found to be against β-lactamases, aminoglycosides, and tetracycline. A C. difficile isolate (strain 27) with tcdA deletion and high antibiotic resistance genes was far apart from other swine farm associated ST11 isolates in the phylogenetic branch. The remarkable genetic similarity between animal and human C. difficile strains suggests potential transmission of ST11 strains between animals and humans. The plasmid replicon sequences repUS43 were identified in all ST11 strains except one variant (strain 27), and 91.67% (22/24) of these were assessed by MOB-typer as having mobilizable plasmids. ConclusionSwine farm associated C. difficile ST11 carried fewer virulence genes than ST11 strains collected from NCBI database. It is critical to monitor the evolution of C. difficile strains to understand their changing characteristics, host-switching, and develop effective control and prevention strategies.