Disulfide Bridges Research Articles

Molecular dynamics simulations at high temperatures of the Aeropyrum pernix L7Ae thermostable protein: Insight into the unfolding pathway

Most life forms on earth live at temperatures below 50 °C. Within these organisms are proteins that form the three-dimensional structures essential to their biological activity and function. However, some thermophilic life forms can resist higher temperatures and have corresponding adaptations to preserve protein function at these high temperatures. Among the structural factors responsible for this resistance of thermophilic proteins to high temperatures is the presence of additional hydrogen bonds in the thermophilic proteins, which means that the structure of the protein is more resistant to unfolding. Similarly, thermostable proteins are rich in structure-stabilizing salt bridges and/or disulfide bridges. In this context, we perform multiple replica molecular dynamics simulations at different temperatures on the Aeropyrum pernix (L7Ae) protein (from the crenarchaeal species A. pernix), known for its high melting temperature, and this in the aim to elucidate the structural factors responsible for its high thermostability. The results reveal that between the most sensitive regions of the protein to the increase of temperature are the loops L1, and L5, which surround the hydrophobic core region of the protein, besides the loop L9, and the C-terminal α5 region. This latter is the longer alpha helix of the protein secondary structure motifs and it is the first to be denaturated at 450 K, while the rest of the protein secondary structure motifs at this temperature were intact. The mechanism of unfolding that follows this protein at 550 K is similar to other thermophile proteins found in literature, with the opening of the loops that surround the hydrophobic core of the protein. So, the latter is completely exposed to the solvent, and partially denatured. The total denaturation process of the protein takes an average time of 40 ns to be achieved. Our investigation also shows that all the calculated salt bridges, with distances less than or equal to 6 A°, are on the periphery part of the protein, exposed to the solvent. However, the hydrophobic core of the protein is not involved in the formation of salt bridges, but rather with formation of some important hydrogen bondings that still persist even at 450 K. So, optimizing hydrogen bonding, near or within the core region, at high temperatures is a strategy that follows this thermostable protein to protect its hydrophobic core from denaturation, and ensure the thermal stability of the protein.

N-Acetylcysteine Antagonizes NGF Activation of TrkA through Disulfide Bridge Interaction, an Effect Which May Contribute to Its Analgesic Activity.

N-acetylcysteine (NAC), a mucolytic agent and an antidote to acetaminophen intoxication, has been studied in experimental conditions and trials exploring its analgesic activity based on its antioxidant and anti-inflammatory properties. The purpose of this study is to investigate additional mechanisms, namely, the inhibition of nerve growth factor (NGF) and the activation of the Tropomyosin receptor kinase A (TrkA) receptor, which is responsible for nociception. In silico studies were conducted to evaluate dithiothreitol and NAC's interaction with TrkA. We also measured the autophosphorylation of TrkA in SH-SY5Y cells via ELISA to assess NAC's in vitro activity against NGF-induced TrkA activation. The in silico and in vitro tests show that NAC interferes with NGF-induced TrkA activation. In particular, NAC breaks the disulfide-bound Cys 300-345 of TrkA, perturbing the NGF-TrkA interaction and producing a rearrangement of the binding site, inducing a consequent loss of their molecular recognition and spatial reorganization, which are necessary for the induction of the autophosphorylation process. The latter was inhibited by 40% using 20 mM NAC. These findings suggest that NAC could have a role as a TrkA antagonist, an action that may contribute to the activity and use of NAC in various pain states (acute, chronic, nociplastic) sustained by NGF hyperactivity and/or accompanied by spinal cord sensitization.

Differential effects of disulfide bond formation in TEM-1 versus CTX-M-9 β-lactamase.

To investigate how disulfide bonds can impact protein energy landscapes, we surveyed the effects of adding or removing a disulfide in two β-lactamase enzymes, TEM-1 and CTX-M-9. The homologs share a structure and 38% sequence identity, but only TEM-1 contains a native disulfide bond. They also differ in thermodynamic stability and in the number of states populated at equilibrium: CTX-M-9 is two-state whereas TEM-1 has an additional intermediate state. We hypothesized that the disulfide bond is the major underlying determinant for these observed differences in their energy landscapes. To test this, we removed the disulfide bridge from TEM-1 and introduced a disulfide bridge at the same location in CTX-M-9. This modest change to sequence modulates the stabilities-and therefore populations-of TEM-1's equilibrium states and, more surprisingly, creates a novel third state in CTX-M-9. Unlike TEM-1's partially folded intermediate, this third state is a higher-order oligomer with reduced cysteines that retains the native fold and is fully active. Sub-denaturing concentrations of urea shifts the equilibrium to the monomeric form, allowing the disulfide bond to form. Interestingly, comparing the stability of the oxidized monomer with a variant lacking cysteines reveals the disulfide is neither stabilizing nor destabilizing in CTX-M-9, in contrast with the observed stabilization in TEM-1. Thus, we can conclude that engineering disulfide bonds is not always an effective stabilization strategy even when analogous disulfides exist in more stable structural homologs. This study also illustrates how homo-oligomerization can result from a small number of mutations, suggesting complex formation might be easily accessed during a protein family's evolution.

Progressive Design of a Ranatuerin-2 Peptide from Amolops wuyiensis: Enhancement of Bioactivity and In Vivo Efficacy.

Antimicrobial peptides (AMPs) that exert multiple functions are considered promising candidates to combat the bacterial drug resistance crisis. Nowadays, targeted peptide modification has been widely recognised to improve biological activity and make up for deficiencies in clinical applications such as toxicity. In this study, a helix-loop peptide was isolated and identified from the skin secretion of the Wuyi torrent frog Amolops wuyiensis, namely, ranatuerin-2-AW (R2AW) (GFMDTAKNVAKNVAATLLDKLKCKITGGC). Target modifications were made to R2AW to study the structure-activity relationships and to optimise its bioactivities. Five analogues were progressively designed via residue substitution and truncation and the antibacterial and anticancer activities were evaluated. We found that the serine-substitution and cyclic-domain-deletion products showed similar antibacterial activity to the natural peptide R2AW, implying that the disulphide bridge and Rana box were dispensable for the antibacterial activity of ranatuerin-2 peptides. Notably, the cationicity- and hydrophobicity-enhanced variant, [Lys4,19, Leu20]R2AW(1-22)-NH2, exhibited significantly optimised antibacterial and anticancer activities. Additionally, it killed bacteria by membrane disruption at a highly efficient rate. Moreover, [Lys4,19, Leu20]R2AW(1-22)-NH2 exerted potential in vivo efficacy in a methicillin-resistant Staphylococcus aureus (MRSA)-infected waxworm model. Overall, this study demonstrated some rational design ideas for optimising the dual antibacterial and anticancer activities of ranatuerin-2 peptides and it proposes [Lys4,19, Leu20]R2AW(1-22)-NH2 as an appealing candidate for therapeutic development.

Fabrication of GSH‐Responsive Poly(Tertiary Amine‐Oxide)‐Based Nanomedicines for Enhanced Anticancer Drug Release

AbstractPoly(tertiary amine‐oxide)‐based polymeric nanocarriers have showed more functionalities than stealthy PEG‐based analogs due to the structure of phospholipid affinitive N‐oxides groups, which has attracted considerable attention to the synthesis of various zwitterionic copolymers with tertiary amine‐oxide grafts for enhanced anticancer drug delivery. However, poly(tertiary amine‐oxide)‐based amphiphilic copolymers with tumor intracellular microenvironment sensitivities, to the knowledge, have been rarely reported likely due to the lack of a controlled synthetic strategy. Herein, a reducible zwitterionic copolymer, poly(ε‐caprolactone)25‐SS‐poly(2‐(N‐oxide‐N,N‐diethylamino)ethyl methacrylate)30 (PCL25‐SS‐OPDEA30) is designed and synthesized successfully via combination of controlled polymerization techniques and post polymerization modification. Specifically, postoxidation of poly(tertiary amine) is confirmed to be a better synthetic strategy toward a well‐defined polymer structure relative to direct polymerization of N,N‐diethylaminoethyl methacrylate (ODEA). The effect of disulfide bridges on the self‐assembly behaviors, in vitro drug loading and drug release properties is investigated in detail. Notablely, the resulting micelles self‐assembled from PCL25‐SS‐OPDEA30 show much greater colloidal stability, higher drug loading content (DLC), and better in vitro tumor cell inhibition than the reduction‐insensitive counterparts. Overall, this study reports a robust strategy toward zwitterionic nanomedicines for on‐demand anticancer drug delivery.

Structural and thermodynamic framework for PIEZO1 modulation by small molecules.

Mechanosensitive PIEZO channels constitute potential pharmacological targets for multiple clinical conditions, spurring the search for potent chemical PIEZO modulators. Among them is Yoda1, a widely used synthetic small molecule PIEZO1 activator discovered through cell-based high-throughput screening. Yoda1 is thought to bind to PIEZO1's mechanosensory arm domain, sandwiched between two transmembrane regions near the channel pore. However, how the binding of Yoda1 to this region promotes channel activation remains elusive. Here, we first demonstrate that cross-linking PIEZO1 repeats A and B with disulfide bridges reduces the effects of Yoda1 in a redox-dependent manner, suggesting that Yoda1 acts by perturbing the contact between these repeats. Using molecular dynamics-based absolute binding free energy simulations, we next show that Yoda1 preferentially occupies a deeper, amphipathic binding site with higher affinity in PIEZO1 open state. Using Yoda1's binding poses in open and closed states, relative binding free energy simulations were conducted in the membrane environment, recapitulating structure-activity relationships of known Yoda1 analogs. Through virtual screening of an 8 million-compound library using computed fragment maps of the Yoda1 binding site, we subsequently identified two chemical scaffolds with agonist activity toward PIEZO1. This study supports a pharmacological model in which Yoda1 activates PIEZO1 by wedging repeats A and B, providing a structural and thermodynamic framework for the rational design of PIEZO1 modulators. Beyond PIEZO channels, the three orthogonal computational approaches employed here represent a promising path toward drug discovery in highly heterogeneous membrane protein systems.

Rapid photothermal antibacterial and antifungal textiles through dynamic disulfide bond-assisted in-situ deposition of SeNPs

Inorganic nanoparticles have significant surface and are often used as efficient antimicrobial agent to solve the problem of bacterial propagation on textile surfaces. However, the commonly used antibacterial nanomaterials generally exhibit weak binding force to textiles, and can be toxic to both the human body and the environment. Herein, in this work, we demonstrated a facile yet effective approach to construct rapid photothermal antibacterial and antifungal textiles, through the dynamic disulfide bond-assisted in-situ deposition of selenium nanoparticles (SeNPs) onto cotton fabric. Briefly, selenium nanospheres with an average particle size of 40 nm were successfully prepared, using α-lipoic acid-modified polylysine (mPLL) as soft template and ascorbic acid as reducing agent. Subsequently, the nanospheres were induced to cross-link with cotton fibers by reconstructing the disulfide bonds and bridging with ethylene glycol diglycyl ether (EGDE). The resulting composite fabric, cotton-g-mPLL@SeNPs, exhibits excellent photothermal conversion ability and durable antibacterial and antifungal properties. Meanwhile, a bright orange-red appearance and excellent anti-ultraviolet ability were achieved after the introduction of inorganic nanoparticles onto fabric surface, without obvious adverse effects on the wearability performances such as hand feeling and air permeability. Furthermore, the obtained textiles crucially remain highly biocompatible and non-cytotoxic, significantly superior to traditional antibacterial nanoparticles such as nanosilver. The present work provides a novel alternative for preparation of the nanoparticle-based textiles with rapid and durable antibacterial and antifungal properties.

Poly(Vinyl Alcohol)/Bovine Serum Albumin Hybrid Hydrogels with Tunable Mechanical Properties.

In this study, a new strategy was adopted for obtaining polymer/protein hybrid hydrogels with shape stability and tunable mechanical or rheological characteristics by using non-toxic procedures. A chemical network was created using a poly(vinyl alcohol)(PVA)/bovine serum albumin (BSA) mixture in aqueous solution in the presence of genipin and reduced glutathione (GSH). Then, a second physical network was formed through PVA after applying freezing/thawing cycles. In addition, the protein macromolecules formed intermolecular disulfide bridges in the presence of GSH. In these conditions, multiple crosslinked networks were obtained, determining the strengthening and stiffening into relatively tough porous hydrogels with tunable viscoelasticity and a self-healing ability. A SEM analysis evidenced the formation of networks with interconnected pores of sizes between 20 μm and 50 μm. The mechanical or rheological investigations showed that the hydrogels' strength and response in different conditions of deformation were influenced by the composition and crosslinking procedure. Thus, the dynamics of the hybrid hydrogels can be adjusted to mimic the viscoelastic properties of the native tissues. The dynamic water vapor-sorption ability, swelling behavior in an aqueous environment, and bioadhesive properties were also investigated and are discussed in this paper. The hybrid hydrogels with tunable viscoelasticity can be designed on request, and they are promising candidates for tissue engineering, bioinks, and wound dressing applications.

High-Density Immobilization of TCEP on Silica Beads for Efficient Disulfide Reduction and Thiol Alkylation in Peptides.

Tris-(2-carboxyethyl)phosphine (TCEP) linked to agarose beads is widely used for reducing disulfide bridges in proteins and peptides. The immobilization of TCEP on beads allows efficient removal after reduction to prevent its reaction with alkylating reagents and thus interference with conjugation reactions. However, a limitation of agarose TCEP is its relatively low reduction capacity per milliliter of wet beads (about 15 μmol/ml), making it unsuitable for the reduction of disulfides from molecules at millimolar concentrations. In this work, we tested the immobilization of TCEP to a range of different solid supports and found that conjugation to silica gel offers TCEP beads with about 8-fold higher reduction capacity (129±16 μmol/ml wet beads). We show that it allows reducing disulfide-cyclized peptides at millimolar concentrations for subsequent cyclization by bis-electrophile linker reagents. Given the substantially higher reduction capacity, the robust performance in different solvents, the low cost of the silica gel, and the ease of functionalization with TCEP, the silica gel-TCEP is suited for reducing disulfide bridges in essentially any peptide and is particularly useful for reducing peptides at higher concentrations.

Enhancing biocatalytical N[sbnd]N bond formation with the actinobacterial piperazate synthase KtzT

Natural compounds with nitrogen-nitrogen bonds are diverse and have applications in medicine and agriculture. l-Piperazic acid (Piz), an α-hydrazino acid, is one of few naturally occurring compounds of its kind. Yet, Piz and its derivatives are valuable building blocks for bioactive compounds. Few NNzymes, enzymes capable of forming NN bonds, have been identified thus far. The hemoenzyme KtzT from Kutzneria sp. 744 catalyzes the intramolecular NN bond formation of N5‑hydroxy-l-ornithine (OH-Orn) to form Piz, a natural building block of kutznerides. The latter has antifungal and antibiotic properties. In our study, we established an improved expression method, with significantly improved yields (ca. 35-fold) of heme-loaded enzyme, making the enzyme much more accessible for laboratory studies. In vitro biochemical characterization under conditions for NN bond formation indicated a considerable thermo- and pH-flexibility, with optimal reaction conditions at 30 °C and 10 mM Tris buffer at pH 9 together with low salinity, paving the way for more complex applications involving KtzT. We have also identified two homologous enzymes from extremophilic organisms to exhibit piperazate-forming activity. In silico structural studies, combined with phylogenetic analysis, resulted in a heme- and substrate-binding model, suggesting target enzyme residues that we propose are critical for the structural integrity and catalytic activity of KtzT. Following this approach, we investigated the potential role of a cysteine residue in a dimer-stabilizing disulfide bridge. The interplay of in vitro and in silico data therefore provides crucial functional information on this enzyme class.

Sequence-Structure Based Comparison of Structurally Homologous Thermophilic and Mesophilic Polyethylene Terephthalate (PET) Hydrolases

Protein structure has a direct impact on thermostability. Deviations in the primary sequence can affect structural changes, leading to alterations in thermostability properties. However, the molecular basis of protein thermostability is unspecified; thus, elucidation of key factors that role particular protein thermostability is required when engineering proteins to be thermostable. To address this challenge, the amino acid composition, hydrophobicity/hydrophilicity ratio, cysteine bridges, and intrinsic features of two structurally homologous but different thermostability, poly(ethylene terephthalate) hydrolase (PETase) were compared. According to the findings, thermostable and thermolabile PETases have similar folds, compactness, and disulfide bridges. Interestingly, an abundance gap of aromaticity, hydrophobic cluster area, polar amino acid and hydrogen bond network compositions demonstrated dominant trends of variations for both PET hydrolases, indicating a pivotal role of these features in the thermostability of PET hydrolase. Furthermore, increased hydrophobic amino acid frequency in the inner surface of thermostable proteins contributed significantly to thermostability by forming more internal hydrophobic interactions and a less hydrophobic patch. There are no consistent trends in insertions and deletions between both PETases. Taken together, these observations demonstrate that hydrophobicity and hydrogen bond networks are essential factors in thermostability of thermostable PETase.

Naphthalene Monoimides with Peri-Annulated Disulfide Bridge—Synthesis and Electrochemical Redox Activity

Nowadays, organosulfur compounds provide new options in the development of full organic ion batteries. However, many drawbacks (such as kinetics limitations during the reversible oxidation of disulfides with cleavage of S–S bond, as well as solubility in non-aqueous electrolytes) make their commercialization difficult. Herein, a new concept for the design of organosulfur compounds with regulated redox properties and limited solubility is proposed. As a proof-of-concept, we designed peri-disulfo-substituted 1,8-naphthalimide derivatives, in which the alkyl chain length and halogen substituents (Cl or Br) at positions 3 and 6 are varied. The compounds were synthesized by an originally developed procedure starting from tetrahalonaphthalic anhydride via nucleophilic substitution at both peri-positions in the respective imide. Using ionic liquid electrolyte, it was found that the new peri-dithiolo-1,8-naphthalimides can participate in n- and p-type redox reactions at about 2.0 V and above 4.0 V vs. Li/Li+, respectively. The redox potentials are sensitive mainly to whether Cl or Br substituents are available in the molecule architecture, while the alkyl chain length determines the kinetics of the redox reactions. Among all compounds, the chloro-substituted compound with the shorter alkyl chain displays the best kinetics for both low- and high-voltage redox reactions.

Structural, biochemical and immunochemical characterization of an acidic phospholipase A2 from Lachesis acrochorda (Viperidae: Crotalinae) venom

Viperids of the genus Lachesis, also known as bushmasters, are capable of injecting great amounts of venom that cause severe envenomation incidents. Since phospholipases type A2 are mainly involved in edema and myonecrosis within the snakebite sites, in this work, the isolation, amino acid sequence and biochemical characterization of the first phospholipase type A2 from the venom of Lachesis acrochorda, named Lacro_PLA2, is described. Lacro_PLA2 is an acidic aspartic 49 calcium-dependent phospholipase A2 with 93% similarity to the L. stenophrys phospholipase. Lacro_PLA2 has a molecular mass of 13,969.7 Da and an experimental isoelectric point around 5.3. A combination of N-terminal Edman degradation and MS/MS spectrometry analyses revealed that Lacro_PLA2 contains 122 residues including 14 cysteines that form 7 disulfide bridges. A predicted 3D model shows a high resemblance to other viperid phospholipases. Nevertheless, immunochemical and phospholipase neutralization tests revealed a notorious level of immunorecognition of the isolated protein by two polyclonal antibodies from viperids from different genus, which suggest that Lacro_PLA2 resembles more to bothropic phospholipases. Lacro_PLA2 also showed significantly high edema activity when was injected into mice; so, it could be an alternative antigen in the development of antibodies against toxins of this group of viperids, seeking to improve commercial polyclonal antivenoms.

Extreme diversity of 12 cations in folding ALS-linked hSOD1 unveils novel hSOD1-dependent mechanisms for Fe2+/Cu2+-induced cytotoxicity

153-Residue copper-zinc superoxide dismutase 1 (hSOD1) is the first gene whose mutation was linked to FALS. To date, > 180 ALS-causing mutations have been identified within hSOD1, yet the underlying mechanism still remains mysterious. Mature hSOD1 is exceptionally stable constrained by a disulfide bridge to adopt a Greek-key β-barrel fold that accommodates copper/zinc cofactors. Conversely, nascent hSOD1 is unfolded and susceptible to aggregation and amyloid formation, requiring Zn2+ to initiate folding to a coexistence of folded and unfolded states. Recent studies demonstrate mutations that disrupt Zn2+-binding correlate with their ability to form toxic aggregates. Therefore, to decode the role of cations in hSOD1 folding provides not only mechanistic insights, but may bear therapeutic implications for hSOD1-linked ALS. Here by NMR, we visualized the effect of 12 cations: 8 essential for humans (Na+, K+, Ca2+, Zn2+, Mg2+, Mn2+, Cu2+, Fe2+), 3 mimicking zinc (Ni2+, Cd2+, Co2+), and environmentally abundant Al3+. Surprisingly, most cations, including Zn2+-mimics, showed negligible binding or induction for folding of nascent hSOD1. Cu2+ exhibited extensive binding to the unfolded state but led to severe aggregation. Unexpectedly, for the first time Fe2+ was deciphered to have Zn2+-like folding-inducing capacity. Zn2+ was unable to induce folding of H80S/D83S-hSOD1, while Fe2+ could. In contrast, Zn2+ could trigger folding of G93A-hSOD1, but Fe2+ failed. Notably, pre-existing Fe2+ disrupted the Zn2+-induced folding of G93A-hSOD1. Comparing with the ATP-induced folded state, our findings delineate that hSOD1 maturation requires: (1) intrinsic folding capacity encoded by the sequence; (2) specific Zn2+-coordination; (3) disulfide formation and Cu-load catalyzed by hCCS. This study unveils a previously-unknown interplay of cations in governing the initial folding of hSOD1, emphasizing the pivotal role of Zn2+ in hSOD1-related ALS and implying new hSOD1-dependent mechanisms for Cu2+/Fe2+-induced cytotoxicity, likely relevant to aging and other diseases.

Conotoxin Prediction: New Features to Increase Prediction Accuracy.

Conotoxins are toxic, disulfide-bond-rich peptides from cone snail venom that target a wide range of receptors and ion channels with multiple pathophysiological effects. Conotoxins have extraordinary potential for medical therapeutics that include cancer, microbial infections, epilepsy, autoimmune diseases, neurological conditions, and cardiovascular disorders. Despite the potential for these compounds in novel therapeutic treatment development, the process of identifying and characterizing the toxicities of conotoxins is difficult, costly, and time-consuming. This challenge requires a series of diverse, complex, and labor-intensive biological, toxicological, and analytical techniques for effective characterization. While recent attempts, using machine learning based solely on primary amino acid sequences to predict biological toxins (e.g., conotoxins and animal venoms), have improved toxin identification, these methods are limited due to peptide conformational flexibility and the high frequency of cysteines present in toxin sequences. This results in an enumerable set of disulfide-bridged foldamers with different conformations of the same primary amino acid sequence that affect function and toxicity levels. Consequently, a given peptide may be toxic when its cysteine residues form a particular disulfide-bond pattern, while alternative bonding patterns (isoforms) or its reduced form (free cysteines with no disulfide bridges) may have little or no toxicological effects. Similarly, the same disulfide-bond pattern may be possible for other peptide sequences and result in different conformations that all exhibit varying toxicities to the same receptor or to different receptors. We present here new features, when combined with primary sequence features to train machine learning algorithms to predict conotoxins, that significantly increase prediction accuracy.

Structural Basis of the Immunological Cross-Reactivity between Kiwi and Birch Pollen.

Allergies related to kiwi consumption have become a growing health concern, with their prevalence on the rise. Many of these allergic reactions are attributed to cross-reactivity, particularly with the major allergen found in birch pollen. This cross-reactivity is associated with proteins belonging to the pathogenesis-related class 10 (PR-10) protein family. In our study, we determined the three-dimensional structures of the two PR-10 proteins in gold and green kiwi fruits, Act c 8 and Act d 8, using nuclear magnetic resonance (NMR) spectroscopy. The structures of both kiwi proteins closely resemble the major birch pollen allergen, Bet v 1, providing a molecular explanation for the observed immunological cross-reactivity between kiwi and birch pollen. Compared to Act d 11, however, a kiwi allergen that shares the same architecture as PR-10 proteins, structural differences are apparent. Moreover, despite both Act c 8 and Act d 8 containing multiple cysteine residues, no disulfide bridges are present within their structures. Instead, all the cysteines are accessible on the protein's surface and exposed to the surrounding solvent, where they are available for reactions with components of the natural food matrix. This structural characteristic sets Act c 8 and Act d 8 apart from other kiwi proteins with a high cysteine content. Furthermore, we demonstrate that pyrogallol, the most abundant phenolic compound found in kiwi, binds into the internal cavities of these two proteins, albeit with low affinity. Our research offers a foundation for further studies aimed at understanding allergic reactions associated with this fruit and exploring how interactions with the natural food matrix might be employed to enhance food safety.

Reduction is sufficient for the disassembly of ricin and Shiga toxin 1 but not Escherichia coli heat-labile enterotoxin.

Many AB toxins contain an enzymatic A moiety that is anchored to a cell-binding B moiety by a disulfide bridge. After receptor-mediated endocytosis, some AB toxins undergo retrograde transport to the endoplasmic reticulum (ER) where reduction of the disulfide bond occurs. The reduced A subunit then dissociates from the holotoxin and enters the cytosol to alter its cellular target. Intoxication requires A chain separation from the holotoxin, but, for many toxins, it is unclear if reduction alone is sufficient for toxin disassembly. Here, we examined the link between reduction and disassembly for several ER-translocating toxins. We found disassembly of the reduced Escherichia coli heat-labile enterotoxin (Ltx) required an interaction with one specific ER-localized oxidoreductase: protein disulfide isomerase (PDI). In contrast, the reduction and disassembly of ricin toxin (Rtx) and Shiga toxin 1 (Stx1) were coupled events that did not require PDI and could be triggered by reductant alone. PDI-deficient cells accordingly exhibited high resistance to Ltx with continued sensitivity to Rtx and Stx1. The distinct structural organization of each AB toxin thus appears to determine whether holotoxin disassembly occurs spontaneously upon disulfide reduction or requires the additional input of PDI.

RALF22 promotes plant immunity and amplifies the Pep3 immune signal.

Rapid alkalinization factors (RALFs) in plantshave been reported to dampen pathogen-associated molecular pattern (PAMP)-triggered immunity via suppressing PAMP-induced complex formation between the pattern recognition receptor (PRR) and its co-receptor BAK1. However, the direct and positive role of RALFs in plant immunity remains largely unknown. Herein, we report the direct and positive roles of a typical RALF, RALF22, in plant immunity. RALF22 alone directly elicited a variety of typical immune responses and triggered resistance against the devastating necrotrophic fungal pathogen Sclerotinia sclerotiorum in a FERONIA (FER)-dependent manner. LORELEI (LRE)-like glycosylphosphatidylinositol (GPI)-anchored protein 1 (LLG1) and NADPH oxidase RBOHD were required for RALF22-elicited reactive oxygen species (ROS) generation. Themutation of cysteines conserved in the C terminus of RALFs abolished, while the constitutive formation of two disulfide bridges between these cysteines promoted the RALF22-elicited ROS production and resistance against S. sclerotiorum, demonstrating the requirement of these cysteines in the functions of RALF22 in plant immunity. Furthermore, RALF22 amplified the Pep3-induced immune signal by dramatically increasing the abundance of PROPEP3 transcript and protein. Supply with RALF22 induced resistance against S. sclerotiorum in Brassica crop plants. Collectively, our results reveal that RALF22 triggers immune responses and augments the Pep3-induced immune signal in a FER-dependent manner, and exhibits the potential to be exploited as an immune elicitor in crop protection.

Novel Triangulenes: Computational Investigations of Energy Thresholds for Photocatalytic Water Splitting.

Organic materials with Inverted Singlet-Triplet (INVEST) gaps are interesting for their potential use in photocatalytic small molecule transformations such as the entirely solar-driven water splitting reaction. However, only a few INVEST emitters are thermodynamically able to split water requiring a first singlet excited dark state, S1 , above 1.27 or 1.76 eV, and absorption near solar the maximum, 2.57 eV. These requirements and the INVEST character are key for achieving a long-lived photocatalyst for water splitting. The only known INVEST emitters that conform to these criteria are large triangular boron carbon nitrides with unknown synthesis pathways. Using ADC(2), a quantum-mechanical method, we describe three triangulenes. 3 a is a cyano azacyclopenta[cd]phenalene derivative while 3 b and 3 c are cycl[3.3.3]azine derivatives. 3 b has a previously undescribed disulfide bridge. Overall, 3 a fulfills requirements for photocatalytic four-electron reduction of water while the S1 states of 3 b and 3 c are likely slightly low for the two-electron reduction process. By analyzing impacts of ligands, we find that there are guidelines describing how S1 -S5 energies and oscillator strengths, T1 energies, and ΔES1T1 gaps are affected, requiring deep-learning algorithms for which studies will be presented by us in due time. The impact of ground-state geometries, solvation effects, as well as reduced-cost ADC(2) algorithms on our findings are also discussed.

A biotechnological approach for the production of new protein bioplastics.

The future of biomaterial production will leverage biotechnology based on the domestication of cells as biological factories. Plants, algae, and bacteria can produce low-environmental impact biopolymers. Here, two strategies were developed to produce a biopolymer derived from a bioengineered vacuolar storage protein of the common bean (phaseolin; PHSL). The cys-added PHSL* forms linear-structured biopolymers when expressed in the thylakoids of transplastomic tobacco leaves by exploiting the formation of inter-chain disulfide bridges. The same protein without signal peptide (ΔPHSL*) accumulates in Escherichia coli inclusion bodies as high-molar-mass species polymers that can subsequently be oxidized to form disulfide crosslinking bridges in order to increase the stiffness of the biomaterial, a valid alternative to the use of chemical crosslinkers. The E. coli cells produced 300 times more engineered PHSL, measured as percentage of total soluble proteins, than transplastomic tobacco plants. Moreover, the thiol groups of cysteine allow the site-specific PEGylation of ΔPHSL*, which is a desirable functionality in the design of a protein-based drug carrier. In conclusion, ΔPHSL* expressed in E. coli has the potential to become an innovative biopolymer.