Weight Of Cuts Research Articles

Effect of graded levels of lablab (Lablab purpureus L. Sweet) hay on carcass characteristics of red sokoto goats fed maize stover basal diet

An experiment was conducted to investigate the effect of feeding varying levels of lablab hay on carcass characteristics of Red Sokoto bucks. Twenty (20) male, non castrate Red Sokoto bucks of average initial weight range of 9.30-11.87± 0.1kg, were used for the experiment. They were randomly assigned to five treatment diets containing lablab hay at 0, 25, 50, 75 and 100% levels of inclusion, respectively. The bucks were individually pen-fed with the concentrate diets at 2% body weight in a Randomized Complete Block Design for a period of 90 days, before they were slaughtered. Results revealed that a 50% inclusion level of lablab hay in the diet led to 79% higher (P<0.05) dressed weight compared to the control diet (35%). The length of small intestine increased by 51% (P<0.05) at 100% level of inclusion of lablab hay compared to the control diet (25%). Also, there was a 45% increase (P<0.05) in the head weight of the bucks at 75% level of lablab hay inclusion. Similarly, including lablab hay at 100% in the diet led to 55% decrease (P<0.05) in the abdominal fat content compared to the control diet. Generally, lablab hay inclusion in the diet of Red Sokoto bucks led to increased (P<0.05) weight of other prime cuts and organs. It was therefore concluded that lablab hay is a potential feed supplement for Red Sokoto bucks under smallholder systems and should be adopted by the farmers for better performance, heavier carcass weight and lean meat production in Nigeria.Key words: Carcass, diet, goats, lablab, Nigeria

Characteristics of the carcass of goats of different genotypes fed pineapple (Ananas comosus L.) stubble hay

The effect of the substitution of Tifton hay (0, 33, 66, 100 g/100 g) for pineapple (Ananas comosus L.) stubble hay was evaluated in the characteristics of the carcasses of goats of an unknown breed (UB) in feedlot. Thirty-two bucks with an average initial live weight of 17.5±1.3 kg, at approximately 150 days of age, were housed in individual stalls provided with feeding and drinking troughs. The animals were distributed in a completely randomized design with four treatments and eight replications. There was a quadratic effect on the weights of hot carcass and cold carcass, empty body, and loin eye area. A linear increase was observed for losses by carcass cooling. The weights of commercial cuts and the weights of total muscle, total bone, intramuscular fat, and total fat decreased linearly. All morphometric measurements were influenced by the inclusion of pineapple stubble hay in the .diets. Substitution of Tifton hay for pineapple stubble hay at the level of 33 g/100 g improves the carcasses of UB goats qualitatively and quantitatively

Performance of Broilers Fed Graded Levels of Bio-Detheobrominized Cocoa Bean Shell (CBS) Based Diets

A study was carried out to observe the effect of bio-detheobromised cocoa bean shell based diets on the performance of broilers. One hundred and ninety six (196) day-old broiler chicks were randomly assigned to seven diets, with each diet replicated four times and seven birds allocated to each replicate. Cocoa Bean Shell was included at varying levels of 0, 5, 10, 15, 20, 25 and 30% in the diets. Results showed that Cocoa Bean Shell inclusion had significant influence on the final weight, weight gain, feed intake and feed conversion ratio (p 0.05) for gut weight and primal cuts. It was observed that Cocoa Bean Shell inclusion at up to 10% had no adverse effect on the performance and primal cut output of broilers.

Predicting fat, lean and the weights of primal cuts for growing pigs of different genotypes and sexes using computed tomography.

The aim of the present study was to find single equations to predict the amounts of fat, lean, and the weights of the primal cuts (ham, loin, belly, and shoulder) as well as ham composition of pigs from 30 to 120 kg BW of different genotypes (GEN; Exp. 1) and sexual conditions (SEX; Exp. 2). Two types of regression equations, taking into account different work situations, were developed: 1) research applications, using computed tomography (CT) parameters, and 2) potential on-farm applications, which could be obtained using easily accessible equipment. Two data sets were used: Exp. 1 included 90 gilts from 3 different GEN: 30 Duroc × (Landrace × Large White), 30 Pietrain × (Landrace × Large White), and 30 Landrace × Large White, and Exp. 2 included 92 Pietrain × (Landrace × Duroc) pigs of different SEX: 24 each of females, entire males, castrated males, and 20 immunocastrated males. Pigs were fully CT scanned in vivo at 30, 70, 100, and 120 kg BW. A subsample of pigs of each GEN ( = 5) or SEX ( = 4) were slaughtered at 30, 70, and 100 kg BW, and all remaining pigs were slaughtered after weighing and scanning at 120 kg BW. For all the slaughtered pigs, the 4 main cuts were fully (GEN) or partially dissected (SEX). CT images were analyzed and used to predict the lean and fat contents as well as the weights of the primal cuts and the composition of the ham. Total amounts of fat and lean for both populations were predicted with high levels of accuracy ( = 0.994 and 0.993, respectively) and proportions of random error for GEN and SEX effects (0.998 and 0.946 for the fat and 0.997 and 0.836 for the lean predictions, respectively). Moreover, the composition of ham (fat, lean, and bone) was very well predicted with high proportions (> 80%) of random error for GEN and SEX effect using CT and potential on-farm predictors.

Effects of sex and dietary lysine on performances and serum and meat traits in finisher pigs

A total of 160 Duroc×(Landrace×Large White) pigs, 50% barrows and 50% gilts, of 28.3±4.52 kg of BW were used to study the effect of lysine (Lys) restriction in the finisher period, on growth performances and serum and carcass and meat quality traits. The grower diet (from 30 to 90 kg BW) was slightly Lys-restricted (7.8 g standardised ileal digestible (SID) Lys/kg) in accordance with results from a previous trial. During the finisher period (90 to 130 kg BW), four experimental diets with decreasing SID Lys contents (6.3, 5.6, 4.2 and 3.2 g/kg) were tested. Each of the eight treatments (two sexes×four levels of Lys) was replicated five times. Each replicate was a pen with four pigs allocated together. When animals achieved 129±2.59 kg were slaughtered and carcass and meat characteristics were evaluated. No significant interaction sex×diet was found. During the finisher period, barrows grew faster (P<0.001) and ate more feed (P<0.001) but tended to be less efficient (P=0.055) than gilts. The Lys restriction affected linearly (P<0.001) all productive performance traits; daily BW gain and feed intake decreased and feed conversion ratio increased. Also, the concentration of serum urea at slaughter tended to be higher in barrows than in gilts (P=0.065) and was reduced quadratically by the restriction of Lys in feed (P<0.001). Carcasses from barrows had higher backfat thickness (P<0.01) and lower weight of main trimmed lean cuts (ham+shoulder+loin; P<0.05) than those from gilts. The Lys restriction during the finisher period decreased carcass yield (quadratic; P<0.001) and the weight of major cuts (linear; P<0.001). Sex and diet had limited effect on meat characteristics; the Lys restriction decreased quadratically the proportion of protein (P<0.01) and increased linearly the intramuscular fat (IMF) content (P<0.001). We can conclude that dietary Lys restriction during finisher period in pigs impaired growth performances and was not successful to increase the carcass fat deposition, although it could have positive effects on IMF proportion of pork.

Effect of Improving Lamphun Cattle with Black Angus on Carcass and Meat Quality

The objective of this study was to assess carcass and meat quality of Black Angus × White Lamphun (A×W) in comparison to Black Angus × Holstein Friesian (A×H) crossbred cattle. In this experiment, sixteen Angus crossbred cattle, eight from each crossbred type, were randomly selected at an average age 20-24 month for slaughter under standard condition. Slaughter weight, carcass quality and proportions of commercial prime retail cuts were determined. The Longissimus dorsi muscle (LD) was selected to evaluate meat quality. Carcass yield (proportion of live weight) was higher ( P <0.01) with the A×H than the A×W crossbred. No significant differences were observed between A×H and A×W for hot and chilled carcass weight, carcass length, back fat thickness and loin eye area. The A×W crossbred was superior ( P <0.05) compared with A×H in chuck, shot rib and sir loin percentage. The lightness (L*) of the LD of A×W was higher ( P <0.01) and redness (a*) as well as protein content was lower ( P <0.05) than in A×H. Drip loss, yellowness (b*), fat, and moisture content were not significantly different between the two crossbred types. Thiobarbitiric acid reactive substance (TBARS) levels were increased with storage period in every group, but this at a lower level with the A×W. In conclusion, A×W was superior to A×H incarcass and meat quality, with similar carcass weights at lower dressing percentage. So, promoting of A×W, is a promising first step in creating improved genotypes suitable to cover the demands of the livestock industry of Thailand at concomitantly lower production costs for the farmers.

Morfologia e qualidade da carcaça de cabritos naturalizados do “Alto Camaquã” abatidos em diferentes idades

The objective of this study was to evaluate the carcass morphology and quality of goats slaughtered at 8-9 and 11-12 months of age, which were reared extensively in the region of “Alto Camaqua”, Rio Grande do Sul, Brazil. The carcasses of 37 male castrated goats, including 14 animals slaughtered at 8-9 months of age and 23 at 11-12 months, were evaluated. The following five cuts were obtained from the right half-carcass: foreleg, hind leg, fluctuating ribs plus loin and flank, fixed ribs and chest. These cuts were then dissected for determination of the composition of muscle, bone, subcutaneous fat, intermuscular fat, and other tissues. There was a significant difference in hot carcass yield, commercial cut yield, cooling losses, carcass and leg length, and leg and chest depth between slaughter ages. An interaction between slaughter age and carcass cut was observed for muscle/fat ratio, muscle percentage, total fat, intermuscular and subcutaneous fat, and weight and percentage of other tissues. There was an effect of slaughter age, regardless of cut, on the variables bone, muscle, total cut weight, muscle/bone ratio and bone percentage. Commercial cut yield and hot carcass weight increase with age. However, the tissue composition of animals slaughtered at a younger age is characterized by a better muscle/fat ratio in the different cuts.

Carcass quality and uniformity of heavy pigs fed restrictive diets with progressive reductions in crude protein and indispensable amino acids

This study investigated the effects of four dietary treatments characterized by 0 to 20% progressive reduction of the dietary crude protein (CP) and indispensable amino acid (AA) contents on carcass quality and uniformity of pigs fed restrictively and slaughtered around 165kg body weight (BW). Carcass data from 233 pigs from a feeding study that involved 3 batches of 80 crossbred pigs each were used. Pigs, offspring of 12 boars, were assigned to 1 of 4 dietary treatments (10 pigs per pen, gilts and barrows, and 2 pens per treatment in each batch) with diets formulated to contain 146 to 117 and 133 to 108g/kg of CP and 7.3 to 5.8 and 5.7 to 4.7g/kg of total Lys in early (90 to 130kg BW) and late (130 to 165kg BW) finishing, respectively. After slaughter, the carcasses were processed and the weight of the commercial lean (neck, loin, shoulder, and ham) and fat cuts (backfat, belly, and jowl) was recorded. The coefficient of variation was used to describe uniformity of the most important carcass traits, and the corresponding confidence intervals were computed to make comparisons across dietary treatments. Carcass weight and midline backfat thickness averaged 137kg and 31mm, respectively, and were not affected by diets. Diets did not influence the weight of commercial cuts and their proportion on carcass weight, with the sole exception of loins. Pigs fed diets containing the 2 lowest CP content had a slight lower proportion of loins in the carcass compared with pigs fed the conventional CP diet (P<0.05). Most carcass traits were affected by sex and by sire effects, but interactions between diet and sex or sire was only episodic. Uniformity of carcass weight, backfat thickness, and weight of loins and dressed hams was not influenced by the dietary treatments. In conclusion, the content of CP, Lys, and other indispensable AA of conventional diets for finishing heavy pigs may be reduced by 20% without impairing the weight of carcass and primal cuts and the yields of dressed hams. This feeding strategy will contribute to the heavy pig industry by reducing feed costs (i.e., decreasing the dietary provision of soybean meal and crystalline AA) and minimizing the nitrogen excretion, without affecting carcass quality.

Blast-Hole Cuttings Grindability Relationship with Silica Content and Bit Wear Rate

The relationship between grindability of blast-hole cuttings, strength parameters and bit wear rate were investigated. In order to achieve this, drill cuttings were collected from twenty blast-holes drilled in a quarry. The samples were tested in the laboratory for Silica content using X-Ray Fluorescence (XRF) spectrometer. Also, the length of button worn on the surface of bit was measured at regular interval with aid of digital vernier caliper on the field as drilling operation progresses to determine wear rate. Sieve analysis was used to determine the size distribution of the blast hole cuttings in the laboratory using sieve shaker while grindability was determined using the ball mill, by grinding for certain number of revolutions. The result obtained show that the weight of drill cuttings retained on 850μm decreases while weight retained on 75μm increases as wear rate increases. Grindability was correlated with wear rate and weight retained at 75μm sieve, the value of multiple coefficients of correlation is 0.126 and 0.064 respectively, this show that there is no relationship between grindability, wear rate and weight of cuttings retained on 75μm. The result of correlation of wear rate and weight retained at 75μm shows that strong relationship exist between them and the value of multiple coefficient of correlation is 0.892.

Carcass characteristics of Santa Inês lambs finished on native pasture and subjected to different types of supplementation

This study aimed to evaluate the biometric measurements and characteristics of the carcass and retail cuts of 24 Santa Ines whole lambs finished in native pasture with different supplements. The animals were divided into four experimental diets: 200 g/day of a protein-energy supplement plus sodium chloride; 200 g/day of the protein-energy-mineral supplement; 300 g/day of the protein-energy-mineral supplement and 300 g/day of the protein-energy-min supplement without manganese. A complete randomized experimental design with four treatments and six replications was used. The supplements did not influence the biometric measurements, body score, slaughter weight, loss by cooling, weight of the half carcass, hot carcass yield, cold carcass yield or the biological yield and weight of retail cuts from the Santa Ines lambs. The weights of hot and cold carcass, empty body, gastrointestinal-tract contents and leg of the lambs that received 300 g/day of supplement without manganese were higher than those of lambs that received 200 g/day of supplement. The energetic protein-mineral supplementation systems evaluated were effective in obtaining quality carcasses under finishing recommendations of Santa Ines sheep on native pasture with an initial weight of approximately 19.9 kg and slaughtered at 200 days old.

Babassu mesocarp bran levels associated with whole or ground corn grains in the finishing of young bulls: carcass and meat characteristics

The objective of this study was to evaluate the effect of grinding corn and inclusion of babassu mesocarp bran (BMB) in the diet of crossbred dairy young bulls finished in feedlot on their carcass and meat characteristics. Twenty-four young bulls were fed four experimental diets containing two BMB inclusion levels (0 and 41.24%) and corn in two forms of processing (ground and whole grains) for 98 days, and then slaughtered in a commercial packing plant. Among the quantitative carcass characteristics, there was interaction only in fat trimmings/whole hot carcass weight and cold carcass yield. The whole hot carcass and hot carcass weights showed reduced means with the use of whole corn. The other quantitative variables were not separately affected by BMB inclusion levels or by the form corn was processed. There was interaction between the factors for pistol cut weight, edible portion and weight of the cuts of the pistol cut, in which the use of whole corn and BMB promoted reduction in the mean values. The use of the whole corn grain reduced the participation of flank cut and elevated the participation of the bone fraction in the carcass. Inclusion of 41.24% of BMB did not change the qualitative meat characteristics, but the use of corn grain resulted in darker meat. The use of whole corn resulted in alteration in the weight of cuts like eye of rump and striploin, which have a high commercial value. There was interaction between factors for the percentages of moisture and minerals of the meat, whereas the crude protein content was affected by the two factors. The use of diets with whole corn or with babassu mesocarp bran may modify the carcass and meat characteristics of finishing crossbred young bulls.

Genetic and phenotypic correlations between performance traits with meat quality and carcass characteristics in commercial crossbred pigs.

Genetic correlations between performance traits with meat quality and carcass traits were estimated on 6,408 commercial crossbred pigs with performance traits recorded in production systems with 2,100 of them having meat quality and carcass measurements. Significant fixed effects (company, sex and batch), covariates (birth weight, cold carcass weight, and age), random effects (additive, litter and maternal) were fitted in the statistical models. A series of pairwise bivariate analyses were implemented in ASREML to estimate heritability, phenotypic, and genetic correlations between performance traits (n = 9) with meat quality (n = 25) and carcass (n = 19) traits. The animals had a pedigree compromised of 9,439 animals over 15 generations. Performance traits had low-to-moderate heritabilities (±SE), ranged from 0.07±0.13 to 0.45±0.07 for weaning weight, and ultrasound backfat depth, respectively. Genetic correlations between performance and carcass traits were moderate to high. The results indicate that: (a) selection for birth weight may increase drip loss, lightness of longissimus dorsi, and gluteus medius muscles but may reduce fat depth; (b) selection for nursery weight can be valuable for increasing both quantity and quality traits; (c) selection for increased daily gain may increase the carcass weight and most of the primal cuts. These findings suggest that deterioration of pork quality may have occurred over many generations through the selection for less backfat thickness, and feed efficiency, but selection for growth had no adverse effects on pork quality. Low-to-moderate heritabilities for performance traits indicate that they could be improved using traditional selection or genomic selection. The estimated genetic parameters for performance, carcass and meat quality traits may be incorporated into the breeding programs that emphasize product quality in these Canadian swine populations.

In vivo computed tomography evaluation of the composition of the carcass and main cuts of growing pigs of three commercial crossbreeds

The purposes of the present study were: (1) to evaluate variations in the body composition of three genetic types at the live weights of 30, 70, 100 and 120kg by analysing live pigs with CT and (2) to determine the allometric growth of the main body parts in relation to body weight and lean, fat and bone contents in relation to the cut weight and body weight. Forty-five gilts of various genetic types: Duroc×(Landrace×Large White), Pietrain×(Landrace×Large White) and Landrace×Large White were scanned in vivo at 30, 70, 100 and 120kg. CT images were analysed and used to predict the lean, fat and bone contents. The results reflected clear differences in the body compositions between crossbreeds, particularly when pigs were ≥ 100kg. However, certain significant differences also appeared at the earliest weight of 30kg, which demonstrates the importance of genetic traits.

Comparative Effects of Breed and Sex on Carcass and Organ Profiles of Duck (Anas plantrynychos) and Guinea Fowl (Numidia meleagris) in Abeokuta, Ogun State, Nigeria

&lt;p&gt;Carcass and organs characteristics of two breeds and sexes of poultry which include Duck and Guinea fowl (GF) were investigated. A total of twenty four matured birds with twelve from each breed were used for this study in a 2 × 2 (Breed × Sex) factorial arrangement in a completely randomized design. The birds were slaughtered in batches of four properly bled, defeathered and dressed, the carcasses and organs weighed. The birds carcasses were chilled at 4 ºC for 24hrs prior to fabrication into primal cuts. The results showed that duck had higher (P&amp;lt;0.05) carcass and organs weight and percentages than GF, also males irrespective of the breed gave higher (P&amp;lt;0.05) carcass and organs weight and percentages than their female counterparts. At interaction level male ducks still gave higher (P&amp;lt;0.05) cut-up parts weight and percentages than female, while female GF elicited higher (P&amp;lt;0.05) primal cuts weight and percentages. It was observed from this study that Duck and GF carcass and organs cut-up parts were heavy enough to supply needed protein like chicken. These birds can therefore, be integrated into commercial poultry production to make animal protein more available to consumers.&lt;/p&gt;

Genetic relationships of carcass traits with retail cut productivity of hanwoo cattle.

This study aimed to estimate genetic correlation between carcass grading and retail productivity traits and to estimate the correlated response on retail productivity traits through selection for carcass grading traits in order to assess the efficacy of indirect selection. Genetic parameters were estimated with the data from 4240 Hanwoo steers using mixed models, and phenotypes included carcass weight (CWT), back fat thickness (BFT), eye muscle area (EMA), marbling (MAR), and estimated lean yield percentage (ELP) as the carcass grading traits, and weight and portion of retail cuts (RCW and RCP), trimmed fats (TFW and TFP) and trimmed bones (TBW and TBP) as the lean productivity traits. The CWT had positive genetic correlations with RCW (0.95) and TFW (0.73), but its genetic correlation with RCP was negligible (0.02). The BFT was negatively correlated with RCP (−0.63), but positively correlated with TFW and TFP (0.77 and 0.70). Genetic correlations of MAR with TFW and TFP were low. Among the carcass grading traits, only EMA was positively correlated with both RCW (0.60) and RCP (0.72). The EMA had a relatively strong negative genetic correlation with TFW (−0.64). The genetic correlation coefficients of ELP with RCP, TFW, and TFP were 0.76, −0.90, and −0.82, respectively. These correlation coefficients suggested that the ELP and EMA might be favorable traits in regulating lean productivity of carcass.

The Potential of the Ni-Resistant TCE-Degrading Pseudomonas putida W619-TCE to Reduce Phytotoxicity and Improve Phytoremediation Efficiency of Poplar Cuttings on A Ni-TCE Co-Contamination

To examine the potential of Pseudomonas putida W619-TCE to improve phytoremediation of Ni-TCE co-contamination, the effects of inoculation of a Ni-resistant, TCE-degrading root endophyte on Ni-TCE phytotoxicity, Ni uptake and trichloroethylene (TCE) degradation of Ni-TCE-exposed poplar cuttings are evaluated.After inoculation with P. putida W619-TCE, root weight of non-exposed poplar cuttings significantly increased. Further, inoculation induced a mitigation of the Ni-TCE phytotoxicity, which was illustrated by a diminished exposure-induced increase in activity of antioxidative enzymes. Considering phytoremediation efficiency, inoculation with P. putida W619-TCE resulted in a 45% increased Ni uptake in roots as well as a slightly significant reduction in TCE concentration in leaves and TCE evapotranspiration to the atmosphere.These results indicate that endophytes equipped with the appropriate characteristics can assist their host plant to deal with co-contamination of toxic metals and organic contaminants during phytoremediation. Furthermore, as poplar is an excellent plant for biomass production as well as for phytoremediation, the obtained results can be exploited to produce biomass for energy and industrial feedstock applications in a highly productive manner on contaminated land that is not suited for normal agriculture. Exploiting this land for biomass production could contribute to diminish the conflict between food and bioenergy production.

Fattening ability and carcass value of Dhamari and Tehami ram lambs, F₁ crossbreds of Dhamari × Tehami in Yemen.

A fattening experiment was carried out to analyze and evaluate the effect of ram lamb genotype on the growth, feed conversion (FC), and carcass value of Dhamari ram lambs, F1 crossbreds of Dhamari × Tehami (F1 DhT), and Tehami ram lambs. Genotype of the ram lambs including the experiment (n = 30) had high significant effect on total weight gain (TWG), average daily gain (ADG), and FC (P < 0.01-0.001). Genotype of the lamb had significant effect on hot and cold dressing percentage (P < 0.001). Also, genotype of the lamb had significant effect on the highest leg percentage (P < 0.001). Furthermore, genotype of the ram lambs had significant effect on musculus longissimus dorsi (MLD) area (P < 0.001). Genotype of the ram lamb had significant effect on TWG, ADG, and FC (P < 0.001). The results of moisture percentage, crude protein percentage, and ash percentage of muscle samples were significantly influenced by ram lamb's genotype (P < 0.001). Fasting live weight and other carcass measurements (hot carcass weight, leg weight, loin weight, shoulder weight, first quality cuts weight) have a positive and highest correlations (P < 0.001). The positive and the highest correlations were found between fasting live weight and hot carcass weight, first quality parts weight. In addition, the positive and the highest correlations were found between hot carcass weight and first quality cuts weight. In general, the results of this study documented that F1 DhT was better than Tehami ram lambs in ADG, TWG, and FC. Additionally, the results show that the feed conversion was in F1 DhT crossbreds ram lambs better than pure Dhamari and Tehami ram lambs, mainly in the carcass indicators.

수출용 오리엔탈 백합 품종 잎마름병 방제를 위한 감마선 및 화학 대체제 융복합 처리 효과

화훼 수출 검역에서 기존 메틸브로마이드 훈증보다 경제적이고 친환경적이며 안전한 대안으로서 감마선 융복합 처리 기술을 백합 잎마름병 방제에 적용하였다. 감마선 융복합 처리는 200 Gy 감마선과 이염화이소시안산나트륨(NaDCC) 은나노 입자(NSS)의 화학대체제를 시베리아, 르네부, 소르본느 품종의 절화 백합이 담긴 수출포장용 종이상자에 총 6회로 실시하였다. 감마선 조사 8일 후 백합 잎과 꽃잎에서 측정한 발병율(disease incidence)과 발병도(disease severity)로 분석 결과, 감마선은 소르본느 잎에서 발병도를 약 13-25% 감소시킨 반면, 르네부 잎에서는 발병도를 2-5% 증가시켰다. 화학대체제 처리와 무처리를 비교한 결과 절화 백합 수출현장에서 화학대체제의 잎마름병 발병 억제 효과를 기대할 수 없었다. 한편, 조사 12일 후 감마선 처리 유무에 따른 백합 잎의 엽록소 함량 비교 결과 감마선에 의해 통계적으로 유의하게 감소하였고, 시베리아와 소르본느 꽃의 만개 기간을 0.4-1.2일 연장시켰다. 또한 감마선이 조사된 절화는 화병에서 무처리에 비해 마름이 발생하여 생중량 감소가 뚜렷하였다. 한편, 1과 2 kGy 고선량 감마선은 백합 꽃봉오리 끝 부분을 짙은 갈색으로 변색시키거나 꽃봉오리 목 부분의 꺽임, 봉오리가 개화하지 못하게 하는 등 마름 이외에도 감마선 과도에 의한 품질저해 피해가 나타났다. In order to seek more eco-friend, economic and safer quarantine method than current methyl bromide fumigation, the convergent treatment with 200 Gy of gamma irradiation and several chemicals such as nano-siver particles (NSS), sodium dichloroisocyanurate (NaDCC) was tried on the cuttings of lily in the packing of catonnage box for export. With 6 independent experiments of gamma irradiation on the three lily cultivars, cvs. Siberia, Le reve and Sorbonne, incidence and severity of lily leaf blight was investigated on leaves and petals at 8-d after infection. 200 Gy of gamma irradiation decreased at 13-25% of severity on the leaf of Sorbonne, but it increased at 2-5% of severity on the leaf of Siberia and Le reve. Chemical substitutes such as NSS and NaDCC were not effective to control of lily blight on cuttings. By 200 Gy of gamma irradiation treatment, chlorophyll contents were statistically significantly decreased at 12-d after irradiation and the longevities vaselife of fully open flower of Siberia and Sorbonne were increased at 0.4 to 1.2 days. In addition, the relative fresh weights of the gamma irradiated cuttings were severely dried compared to the non-irradiated control. On the other hands, the symptoms of phyto-toxicity of high dose gamma irradiation at 1 or 2 kGy on cv. Siberia were to be blight at the tip of bloom, bent necks of flower, and delayed the process of flowering.

Desempenho, rendimento de carcaça e cortes nobres de frangos de corte alimentados com rações suplementadas com Solanum glaucophyllum

The objective was to evaluate the performance of broilers from 8 to 42 days of age, fed with diets supplemented with active vitamin D3. It was used 648 broilers, males, Cobb®, distributed among six treatments (0.0; 0.5; 1.0; 1.5; 2.0 and 2.5 D3/kg of ration) using a randomized block design, with six repetitions of 18 birds each. At 8 and 42 days of age each experimental unit and the rations were weighted in order to evaluated the performance (feed intake - FI, weight gain - WG and feed conversion - FC). Later, three broilers/repetition were removed and slaughtered in order to measure the absolutely weight, carcass and noble cuts yield. The average carcass, breast, thighs, drumsticks and wings were 70.17%, 37.09%, 14.08%, 18.31% and 10.44%, respectively. The levels of active vitamin D3 did not influence (p&gt;0.05) performance, nor the carcass and noble cuts of broilers. Including up to 2.5 ?g/kg in ration of active vitamin D3 did not influence (p&gt;0.05) the performance and carcass and noble cuts yield of broilers.

Genetic and phenotypic parameters for carcass and meat quality traits in commercial crossbred pigs.

Pork quality and carcass characteristics are now being integrated into swine breeding objectives because of their economic value. Understanding the genetic basis for these traits is necessary for this to be accomplished. The objective of this study was to estimate phenotypic and genetic parameters for carcass and meat quality traits in 2 Canadian swine populations. Data from a genomic selection study aimed at improving meat quality with a mating system involving hybrid Landrace × Large White and Duroc pigs were used to estimate heritabilities and phenotypic and genetic correlations among them. Data on 2,100 commercial crossbred pigs for meat quality and carcass traits were recorded with pedigrees compromising 9,439 animals over 15 generations. Significant fixed effects (company, sex, and slaughter batch), covariates (cold carcass weight and slaughter age), and random additive and common litter effects were fitted in the models. A series of pairwise bivariate analyses were implemented in ASReml to estimate phenotypic and genetic parameters. Heritability estimates (±SE) for carcass traits were moderate to high and ranged from 0.22 ± 0.08 for longissimus dorsi muscle area to 0.63 ± 0.04 for trimmed ham weight, except for firmness, which was low. Heritability estimates (±SE) for meat quality traits varied from 0.10 ± 0.04 to 0.39 ± 0.06 for the Minolta b* of ham quadriceps femoris muscle and shear force, respectively. Generally, most of the genetic correlations were significant (P < 0.05) and ranged from low (0.18 ± 0.07) to high (-0.97 ± 0.35). There were high negative genetic correlations between drip loss with pH and shear force and a positive correlation with cooking loss. Genetic correlations between carcass weight (both hot and cold) with carcass marbling were highly positive. It was concluded that selection for increasing primal and subprimal cut weights with better pork quality may be possible. Furthermore, the use of pH is confirmed as an indicator for pork water-holding capacity and cooking loss. The heritabilities of carcass and pork quality traits indicated that they can be improved using traditional breeding methods and genomic selection, respectively. The estimated genetic parameters for carcass and meat quality traits can be incorporated into the breeding programs that emphasize product quality in these Canadian swine populations.