Current Treatment Processes Research Articles

Artificial Intelligence in Healthcare: Pros, Cons, and Future Expectations

Artificial intelligence (AI) has rapidly become a globally accessible resource for organizing and processing information, improving efficiency, and increasing effectiveness. In healthcare, AI has shown the potential to identify health risks at early stages and enhance current treatment processes. As AI becomes more widely integrated, it is essential to consider the benefits and risks associated with this largely unproven technology to create an environment where patients and providers universally and equitably experience its advantages.

The Study of Removal of Polyvinyl Chloride (PVC) Particles from Wastewater through Electrocoagulation

Plastic was produced massively, especially using polyvinyl chloride (PVC) as a raw material. Unfortunately, this condition cause affects the environment, which creates a new pollutant issue. It is essential to study the removal of PVC microplastics in current water treatment processes. The study of wastewater treatment can be achieved using electrocoagulation, which has several benefits, including low-cost, simple chemicals, and accessible equipment operation. This research investigated the study of the removal of PVC microplastics from wastewater by electrocoagulation. The new potential of the electrocoagulation technique using Al-Al electrodes was studied systematically at various variations, i.e., electrolysis time, electrolyte concentration, initial pH, coagulation speed, and electrolyte type. The results showed that the PVC microplastics removal efficiency reached 100% after electrolysis for 60 min, electrolyte concentration of 0.01 mol/L, initial pH of 7, coagulation speed of 500 rpm, the type of electrolyte used was NaCl at a flocculation speed. These optimum conditions also reduced the value of turbidity of wastewater samples from 1.39 ± 0.02 to 1.10 ± 0.05 NTU. The results of this study provide an engineering perspective in optimizing operational parameters for removing PVC microplastics in aquatic environments.

Ultra-hydrophilic MOF-303 on electrospun nanofibers with Burr Puzzles structure for the purification of oily wastewater containing heavy metal ions

The current oil-water separation field is extremely complex and the material system is variable. Therefore, the full process applicability of membrane technology is extremely demanding, both in terms of high oil-water separation efficiency and the treatment of soluble substances in wastewater, such as heavy metal ions. The high demand for membrane performance is accompanied by the complexity of the membrane manufacturing process, resulting in the development of membrane technology being hindered. If we can purify heavy metal ions from wastewater while meeting the conditions of oil-water treatment, and simplify the process flow, it is an innovation that we are happy to see. Herein, the use of a seed pre-embedded growth strategy is taking polyacrylamide (PEI) as a breakthrough point, we take advantage of blending to introduce embedding sites in polyacrylonitrile (PAN) membranes. Uniform growth of MOF-303 with Burr Puzzle structure on membrane surface using in situ hydrothermal growth method. The Burr Puzzles structure on the membrane surface is not only able to effectively deal with nanoscale stabilized oil-water mixture and effectively adsorb heavy metal ions, but also enables the MOF-303 crystals to grow more firmly on the membrane surface, so that the modified membrane still maintains good performance in harsh environments. The separation fluxes of the oil-in-water emulsions were all higher than 6987 L m−2 h−1 for oil-in-water emulsion with a separation efficiency of 98.4 %, and the adsorption efficiency of heavy metal ions was also as high as 98.3 %. After 20 cycles, the membrane maintains its promising performance. Due to its simple preparation process and excellent efficiency of emulsions separation and heavy metal ions separation, simplifies complex membrane processes while meeting the rigors of wastewater treatment. it has great prospects for development in the current complex wastewater treatment process.

Boosting seawater denitrification in an electrochemical flow cell

Nitrogen compounds in current seawater treatment processes typically are converted to nitrate, threatening seawater quality and marine ecology. Electrochemical denitrification is a promising technique, but its efficiency is severely limited by the presence of excess chloride ions. In this work, a flow-through cell went through an on-demand chlorine-mediated electrochemical-chemical tandem reaction process was designed for efficient seawater denitrification. Equipped with ultrathin cobalt-based nanosheets as the cathode catalyst and commercial IrO2-RuO2/Ti as the anode, the newly designed flow-through cell achieved nitrate removal efficiency that was about 50 times greater than the batch cell and nearly 100 % N2 selectivity. Moreover, nitrite and ammonia can also be removed with over 93 % efficiency in total nitrogen (TN) removal. Furthermore, the concentration of active chlorine in the effluent could be adjusted within two orders of magnitude, enabling on-demand release of active chlorine. Finally, this flow-through cell reduced the TN of actual mariculture tailwater (40.1 mg N L-1 nitrate) to only 5.7 mg N L-1, meeting the discharge standard for aquaculture tailwater of Fujian, China. This work demonstrates the paradigm of deep denitrification from ultra-concentrated chlorine ion wastewater using an on-demand active chlorine-mediated electrochemical-chemical tandem reaction process.

Current Treatment Process and Challenges for Spinal Muscular Atrophy (SMA)

Spinal muscular atrophy (SMA) presents as a pediatric neuromuscular disorder resulting from mutations in the survival motor neuron 1(SMN1) gene, with an incidence of approximately 10-13 per 100,000 live births. This condition manifests primarily through muscle weakness and atrophy, particularly affecting the proximal limb muscles. A homozygous deletion of exon 7 in the SMN1 gene is the most common genetic mutation in SMA and serves as a sensitive diagnostic marker. This article comprehensively explores various aspects of SMA, including its types, diagnostic methods, and management strategies. Pulmonary care, gastrointestinal (GI) management, nutritional supplementation, orthopedic spinal care, and physiotherapy play crucial roles in delaying disease progression. Current pharmacological treatments for SMA are diverse and evolving. Notable among them is Zolgensma (formerly AVXS-101 or Onasemnogene abeparvovec), a gene replacement therapy utilizing an adeno-associated virus vector to boost functional SMN protein levels. Sodium vanadate, a phosphatase inhibitor, and risdiplam (RO703406) are agents that modulate SMN2 splicing to augment the production of functional SMN protein. Riluzole acts as a neuroprotective agent by preventing SMN deficiency, while reldesemtive (CK-2127107) is under development as a muscle-enhancing therapy to ameliorate skeletal muscle function during fatigue. While pharmacological therapies for SMA are advancing, a holistic approach involving comprehensive multidisciplinary care, encompassing pulmonary support, proper nutritional supplementation, and adept orthopedic management, significantly contributes to the effective management of SMA.

Treatment of the Textile Wastewater using Malaysian Ganoderma lucidum Mycelial Pellets

Purification of textile wastewater using biomass and in particular different fungi is gaining exponential interest to minimize the impacts of current physical-chemical and biological wastewater treatment by-products. This study investigates the potential of Malaysian Ganoderma lucidum mycelium pellets (GLMP) for the decontamination of wastewater samples received from a commercial textile manufacturer. All studies were performed under ambient temperature (26-35 ℃) and unsterilized conditions using a simple bioreactor design (stirred batch bioreactor) for a more practical assimilation of the current available wastewater treatment process system. The optimal conditions of adsorption by GLMP were determined by variation effects of adsorbent concentration (0, 8.75, 12.5 and 25 g/L), pH (unadjusted 7.10 – 8.22, 4 and 6), and wastewater dilution factor (1:0, 1:4, and 2:3, v/v). This method was proved to be effective in both decolorization and chemical oxygen demand (COD) reduction, simultaneously. The most significant percentage of decolorization observed was 77.24% in a 72 h treatment, whereas COD reductions were 78.32% in a 36 h treatment. The present study fits both Langmuir and Freundlich adsorption isotherms as the values of R2 both model were close to 1, indicating the favorable adsorption of dyes towards Malaysian GLMP.

Surveillance of PFAS in sludge and biosolids at 12 water resource recovery facilities.

Per- and polyfluoroalkyl substances (PFAS) are refractory anthropogenic chemicals and current treatment processes at municipal water resource recovery facilities (WRRFs) cannot efficiently degrade them, hence, these chemicals cycle through the environment. Certain PFAS can be concentrated in biosolids from WRRFs and are commonly land applied for beneficial reuse. Given recent advances in measurement of PFAS, documentation of the range of concentrations in pre-stabilized sludge and stabilized biosolids is critical to evaluating treatment best practices and assessing potential human health and ecological risks. In this study, pre-stabilized sludge and post-stabilized biosolids samples were collected from 12 major WRRFs across the United States. PFAS were analyzed using Environmental Protection Agency (EPA) Method SW846-3500C/537.1, and Draft EPA Method 1633, by one commercial laboratory and two university research laboratories, respectively. Results comparison among laboratories demonstrated statistical differences in PFAS concentrations among split samples. For example, 5:3 FTCA (fluorotelomer carboxylic acid) concentrations in post-stabilized sludge at Lab 1 were measured at 21ng/g (dry), while they were detected at 151ng/g (dry) in Lab 3. Further, higher PFAS concentrations were observed in post-stabilized biosolids compared to pre-stabilized sludges, regardless of the laboratory or analysis method, even when solids destruction through solids stabilization was considered. Further research is required to refine methods for analyses of PFAS in sludge and biosolids samples from WRRFs prior to being used for development of regulatory actions as well as understanding how various treatment protocols could impact concentrations of PFAS in land-applied biosolids.

The efficacy of current treatment processes to remove, inactivate, or reduce environmental bloom-forming Escherichia coli.

Escherichia coli is excreted in high numbers from the intestinal tract of humans, other mammals, and birds. Traditionally, it had been thought that E. coli could grow only within human or animal hosts and would perish in the environment. Therefore, the presence of E. coli in water has become universally accepted as a key water quality indicator of fecal pollution. However, recent research challenges the assumption that the presence of E. coli in water is always an indicator of fecal contamination, with some types of E. coli having evolved to survive and grow in aquatic environments. These strains can form blooms in water storages, resulting in high E. coli counts even without fecal contamination. Although these bloom-forming strains lack virulence genes and pose little threat to public health, their presence in treated water triggers the same response as fecal-derived E. coli. Yet, little is known about the effectiveness of treatment processes in removing or inactivating them. This study evaluated the effectiveness of current treatment processes to remove bloom-forming strains, in comparison to fecal-derived strains, with conventional coagulation-flocculation-sedimentation and filtration investigated. Second, the effectiveness of current disinfection processes-chlorination, chloramination, and ultraviolet (UV) light to disinfect bloom-forming strains in comparison to fecal-derived strains-was assessed. These experiments showed that the responses of bloom isolates were not significantly different from those of fecal E. coli strains. Therefore, commonly used water treatment and disinfection processes are effective to remove bloom-forming E. coli strains from water.IMPORTANCEThe presence of Escherichia coli in water has long been used globally as a key indicator of fecal pollution and for quantifying water safety. Traditionally, it was believed that E. coli could only thrive within hosts and would perish outside, making its presence in water indicative of fecal contamination. However, recent research has unveiled strains of E. coli capable of surviving and proliferating in aquatic environments, forming blooms even in the absence of fecal contamination. While these bloom-forming strains lack the genes to be pathogenic, their detection in source or drinking water triggers the same response as fecal-derived E. coli. Yet, little is known about the efficacy of treatment processes in removing them. This study evaluated the effectiveness of conventional treatment and disinfection processes in removing bloom-forming strains compared to fecal-derived strains. Results indicate that these commonly used processes are equally effective against both types of E. coli, reassuring that bloom-forming E. coli strains can be eliminated from water.

Comprehensive Utilization and Control Measures of Iron and Steel Slag

With the increase of steel production, the amount of steel slag piled up is on the rise. The article analyzes the current situation of blast furnace slag utilization, elaborates on the current treatment technology of blast furnace slag, and points out that in the future, the utilization of blast furnace slag will develop towards the direction of developing high value-added products, and the sensible heat recovery rate of blast furnace slag is expected to increase. Analyze the current application status and treatment process of converter slag. The comprehensive treatment technology of converter slag is limited by multiple factors, and it is proposed to control converter slag from the production source through "slag recycling".

Efficient nitrogen removal by microalgal-bacterial granular sludge-marimo coupling process

Current biological wastewater treatment processes usually have a drawback of insufficient nitrogen (N) removal, contributing to the ubiquitous eutrophication of aquatic ecosystems globally. To address such a challenging situation, this study explored an innovative microalgal-bacterial granular sludge-marimo (MBGS-MA) coupling process. The process removed 83.4 % of N with the effluent N concentration of 4.0 mg/L. With the growth of MBGS, there was a shift towards genes associated with nitrification and denitrification, and away from ammonia assimilation genes, revealing internal mechanism of the shift of N removal pathway. Contrarily, MA could use gaseous N2 with the N fixing genes in MA enriched, and the genes abundance related to assimilatory nitrate reduction were also raised under the mutualistic interactions between Proteobacteria and Cyanobacteria, which was beneficial to achieve efficient N removal. These findings may open a new horizon for developing innovative hybrid microalgal-bacterial processes aimed at high-efficiency N removal from wastewater.

Analysis of sewage treatment process and effect Take Maidao sewage plant in Qingdao as an example

The purpose of this paper is to analyze the current situation of urban sewage treatment, understand the process of sewage treatment, conduct in-depth analysis of it combined with actual cases, and put forward effective suggestions for improvement. Nowadays, with the development of science and technology, many cities have built advanced sewage plants, as an example as Qingdao, which is a serious water shortage city in Shandong Province of China. More specifically, a field interview and a field trip in Mai Dao sewage plant provide the actual treatment process and real data of the plant. It provides with a comprehensive process and actual removal rate of the plant, so we can have a deeper understanding of the current status of urban sewage treatment processes. Additionally, an analysis of the effect of every devices in the process supports the effectiveness of the plant. Furthermore, this paper gives information about current situations of reuse water process and offers some suggestions to the current treatment process and the use of outflow water.

Recycling and Degradation of Polyamides.

As one of the five major engineering plastics, polyamide brings many benefits to humans in the fields of transportation, clothing, entertainment, health, and more. However, as the production of polyamide increases year by year, the pollution problems it causes are becoming increasingly severe. This article reviews the current recycling and treatment processes of polyamide, such as chemical, mechanical, and energy recovery, and degradation methods such as thermal oxidation, photooxidation, enzyme degradation, etc. Starting from the synthesis mechanism of polyamide, it discusses the advantages and disadvantages of different treatment methods of polyamide to obtain more environmentally friendly and economical treatment schemes. Finding enzymes that can degrade high-molecular-weight polyamides, exploring the recovery of polyamides under mild conditions, synthesizing environmentally degradable polyamides through copolymerization or molecular design, and finally preparing degradable bio-based polyamides may be the destination of polyamide.

Application of side-submerged combustion smelting(SSC) process in recovery of lead smelting by-products

The treatment of lead smelting by-products,such as anode slime and antimony-containing dust and slag is an important process, which is not only related to improvement the rate of comprehensive recovery of resources, but also plays a very important role in improving the economic benefits of plant. The existing by-product treatment technology and current situation were introduced in first. Combined with the current treatment process and characteristics of by-products, this paper focuses on the characteristics of the oxygen-enriched submerged combustion side-blown smelting technology and the application of by-products treatment. Based on the engineering practice and relevant technical and economic indicators of treating 5812t anode slime annually, compared with the conventional technology, this technology has obvious advantages in operation cost, treatment efficiency and environmental protection.

Non-target and target screening and risk assessment of per- and polyfluoroalkyl substances in textile wastewater and receiving river

Textile industry uses varieties of chemicals including per- and polyfluoroalkyl substances (PFAS). PFAS are known to be persistent and incompletely removed in wastewater treatment plants (WWTPs). So far, little is known about what types of PFAS are used in the textile industry and their potential risks. Here we investigated PFAS in two WWTPs and a receiving river of a textile industrial park in Guangxi, China, by using both target and non-target analyses over a two-year period. The target analysis identified 11 specific PFAS, while the non-target analysis revealed a list of 648 different PFAS, including both legacy and emerging substances. Notably, perfluorooctanoic acid (PFOA) was still the most prevalent compound detected. Of particular concern was the finding that the investigated WWTPs, which employs an A/O (Anaerobic/Aerobic) process, exhibited a poor removal efficiency for PFAS. The average removal rate was only 22.0 %, indicating that the current treatment processes are inadequate in effectively mitigating PFAS contamination. Correlation analysis further highlighted the potential for PFAS to be transported from WWTPs to the receiving river, revealing a significant and strong positive correlation between the PFAS in the WWTP effluent and those of the river. Perfluorooctanesulfonic acid (PFOS) and two emerging PFAS (DTXSID30240816 and DTXSID90240817) were identified to have high ecological risks in the receiving river. Notably, these two emerging PFAS are homologues, and their presence in WWTPs has been poorly reported. The findings highlight the wide use and persistence of PFAS in current textile WWTPs, indicating potential long term risks to the receiving environment.

Organic Micropollutants in the Agricultural Chain of Production of Strawberries by Irrigation with Treated Wastewater and Assessment of Human Health Implications

Treated water reuse is vital for sustainable water management and reducing the strain on freshwater resources, particularly in agriculture, which has a great impact on freshwater withdrawal. Despite the benefits, the reuse of treated wastewater carries risks due to residual chemical and microbiological contaminants, such as the organic micropollutants polycyclic aromatic hydrocarbons (PAHs) and polychlorinated biphenyls (PCBs), which are not fully removed by current treatment processes and can affect plant growth and human health when used for irrigation. This study focuses on monitoring the PAHs and PCBs in wastewater used for irrigating strawberries, assessing their transfer to crops and potential health risks. The effluents of four wastewater treatment plants were monitored for two years (2017 and 2018) and used to irrigate strawberries grown in plot installations. Effective and robust analytical methodologies (60–99% recoveries, optimal reproducibility) were developed for wastewater and strawberry analysis. The analysis of the treated wastewaters showed the presence of residual PAH and PCB concentrations at hundreds of ng/L. The strawberry crops were further analyzed to measure the PAHs and PCBs. Since two PAHs were present in strawberries, a risk assessment was performed (EPA methodology), finding that the residual contamination of treated waters does not pose a significant health risk, for both adults and children, through the consumption of fruits.

Retention of Ciprofloxacin and Carbamazepine from Aqueous Solutions Using Chitosan-Based Cryostructured Composites.

Water pollution is becoming a great concern at the global level due to highly polluted effluents, which are charged year by year with increasing amounts of organic residues, dyes, pharmaceuticals and heavy metals. For some of these pollutants, the industrial treatment of wastewater is still relevant. Yet, in some cases, such as pharmaceuticals, specific treatment schemes are urgently required. Therefore, the present study describes the synthesis and evaluation of promising cryostructured composite adsorbents based on chitosan containing native minerals and two types of reinforcement materials (functionalized kaolin and synthetic silicate microparticles). The targeted pharmaceuticals refer to the ciprofloxacin (CIP) antibiotic and the carbamazepine (CBZ) drug, for which the current water treatment process seem to be less efficient, making them appear in exceedingly high concentrations, even in tap water. The study reveals first the progress made for improving the mechanical stability and resilience to water disintegration, as a function of pH, of chitosan-based cryostructures. Further on, a retention study shows that both pharmaceuticals are retained with high efficiency (up to 85.94% CIP and 86.38% CBZ) from diluted aqueous solutions.

First application of the novel anaerobic/aerobic/anoxic (AOA) process for advanced nutrient removal in a wastewater treatment plant

The stringent effluent quality standards in wastewater treatment plants (WWTPs) can effectively mitigate environmental issues such as eutrophication by reducing the discharge of nutrients into water environments. However, the current wastewater treatment process often struggles to achieve advanced nutrient removal while also saving energy and reducing carbon consumption. The first full-scale anaerobic/aerobic/anoxic (AOA) system was established with a wastewater treatment scale of 40,000 m3/d. Over one year of operation, the average TN and TP concentration in the effluent of 7.53 ± 0.81 and 0.37 ± 0.05 mg/L was achieved in low TN/COD (C/N) ratio (average 5) wastewater treatment. The post-anoxic zones fully utilized the internal carbon source stored in pre-anaerobic zones, removing 41.29 % of TN and 36.25 % of TP. Intracellular glycogen (Gly) and proteins in extracellular polymeric substances (EPS) served as potential drivers for post-anoxic denitrification and phosphorus uptake. The sludge fermentation process was enhanced by the long anoxic hydraulic retention time (HRT) of the AOA system. The relative abundance of fermentative bacteria was 31.66 - 55.83 %, and their fermentation metabolites can provide additional substrates and energy for nutrient removal. The development and utilization of internal carbon sources in the AOA system benefited from reducing excess sludge production, energy conservation, and advanced nutrient removal under carbon-limited. The successful full-scale validation of the AOA process provided a potentially transformative technology with wide applicability to WWTPs.

Application of vacuum membrane distillation-Fenton oxidation process for deep purification of low-level radioactive organic wastewater

During the production of UO2 kernel for the high temperature gas-cooled nuclear reactor, a large amount of low-level radioactive organic wastewater (LLROW) containing ammonia, uranium and organic compounds are generated. The current treatment process is suffered from the production of radioactive solid wastes, low adsorption efficiency of organic matters and the frequent membrane fouling during RO process. In this study, vacuum membrane distillation (VMD)-Fenton oxidation process was developed for the deep purification of the LLROW. The process parameters were optimized and the system performance was evaluated. As a result, all major contaminates such as uranium, NH3-N, TN and COD could meet the GB8978-1996 (secondary standard) and GB/T31962-2015 (B standard) for direct discharge. The membrane fouling was also studied by membrane autopsy as well as the quantum calculation. It was found that weak hydrogen bonds were formed between PTFE membrane and contaminants while the membrane fouling could be recovered by 0.1 M HCl cleaning.

Screening Electrochemical Phosphorous Recovery Conditions in Real and Synthetic Wastewater Streams

The recovery of phosphorus (P) from wastewater via electrochemical precipitation is a promising route to improved nutrient recovery due to its ability to be coupled with current wastewater treatment processes, the viability of both small- and large-scale implementation (allowing for dispersed nutrient recovery systems), and utilization of electrons as an energy source (as opposed to chemically induced precipitation). In this talk, electrochemical P recovery from real and synthetic wastewater will be demonstrated, discussed, and contrasted. This study highlights the viability of electrochemical P recovery by considering waste stream composition, energetics of separation, and analyses of recovered products.Specifically, both synthetic and real wastewater was tested under similar stirred batch reactor conditions with various mass transfer conditions, electrode types, and applied potentials. The reactor solution chemistry was based upon an analysis of three real waste streams and time series analyses were used to compare the transient stream conditions to conditions used in P recovery studies. Additionally, materials characterization was performed on the product of various recovery conditions and the implications of reactor conditions are discussed.

Emerging and legacy per- and polyfluoroalkyl substances (PFAS) in fluorochemical wastewater along full-scale treatment processes: Source, fate, and ecological risk

The increasing applications of emerging per- and polyfluoroalkyl substances (PFAS) have raised global concern. However, the release of emerging PFAS from the fluorochemical industry remains unclear. Herein, the occurrence of 48 emerging and legacy PFAS in wastewater from 10 fluorochemical manufacturers and mass flows of PFAS in a centralized wastewater treatment plant were investigated. Their distribution and ecological risk in neighboring riverine water were also evaluated. In wastewater from fluorochemical manufacturers, PFAS concentrations were in the range of 14,700–5200,000 ng/L and 2 H,2 H-perfluorooctanoic acid (6:2 FTCA), perfluorooctanoic acid (PFOA), N-ethyl perfluorooctane sulfonamide (N-EtFOSA), and 1 H,1 H,2 H,2 H-perfluorodecanesulfonate (8:2 FTS) were the major PFAS detected. Several PFAS displayed increased mass flows after wastewater treatment, especially PFOA and 6:2 FTCA. The mass flows of PFAS increased from − 20% to 233% after the activated sludge system but decreased by only 0–13% after the activated carbon filtration. In riverine water, PFAS concentrations were in the range of 5900–39,100 ng/L and 6:2 FTCA, 1 H,1 H,2 H,2 H-perfluorodecyl phosphate monoester (8:2 monoPAP), 1 H,1 H,2 H,2 H-perfluorooctyl phosphate monoester (6:2 monoPAP), PFOA, and perfluorohexanoic acid (PFHxA) were the major PFAS detected. PFOA and 6:2 FTCA exhibited comparable hazard quotients for ecological risk. Current wastewater treatment processes cannot fully remove various PFAS discharged by fluorochemical manufacturers, and further investigations on their risk are needed for better chemical management.