Ralstonia Eutropha Research Articles

Production, optimization, scale up and characterization of polyhydoxyalkanoates copolymers utilizing dairy processing waste

The microbial biotransformation using low-cost feedstock to produce biopolymers (degradable), an alternative to petrochemical-based synthesis plastics (non-degradable), can be a beneficial approach towards sustainable development. In this study, the dairy industry processes waste (whey) is used in polyhydroxyalkanoate (PHA) copolymer production. Initial screening suggested that Ralstonia eutropha produced higher PHA as compared to Bacillus megaterium. A central composite rotatable design-based optimization using two process variables (amino acid and tween-80) concentration remarkably influenced PHA co-polymer production under physiological conditions of pH (7), temperature (37 °C), and agitation rate of 150 rpm. High polyhydroxybutyrate (PHB) mass fraction yield of 69.3% was observed as compared to predicted yield of 62.8% from deproteinized whey as feed. The combination of tryptophan (50 mg L−1) and tween-80 (3 mL−1) enhanced R. eutropha mass gain to 6.80 g L−1 with PHB contents of 4.71 g L−1. Further, characterization of PHA and its copolymers was done by ESI–MS, FTIR, and TEM. On upscaling up to 3.0 L, the PHA contents and yields were noted as quite similar by R. eutropha. This study demonstrates that dairy waste processing waste can be potentially utilized as inexpensive feed for producing high content of biopolymers to develop a sustainable system of waste management.

Protecting the Achilles heel: three FolE_I-type GTP-cyclohydrolases needed for full growth of metal-resistant Cupriavidus metallidurans under a variety of conditions.

In Cupriavidus metallidurans and other bacteria, biosynthesis of the essential biochemical cofactor tetrahydrofolate (THF) initiates from guanosine triphosphate (GTP). This step is catalyzed by FolE_I-type GTP cyclohydrolases, which are either zinc-dependent FolE_IA-type or metal-promiscuous FolE_IB-type enzymes. As THF is also essential for GTP biosynthesis, GTP and THF synthesis form a cooperative cycle, which may be influenced by the cellular homeostasis of zinc and other metal cations. Metal-resistant C. metallidurans harbors one FolE_IA-type and two FolE_IB-type enzymes. All three proteins were produced in Escherichia coli. FolE_IA was indeed zinc dependent and the two FolE_IB enzymes metal-promiscuous GTP cyclohydrolases in vitro, the latter, for example, functioning with iron, manganese, or cobalt. Single and double mutants of C. metallidurans with deletions in the folE_I genes were constructed to analyze the contribution of the individual FolE_I-type enzymes under various conditions. FolE_IA was required in the presence of cadmium, hydrogen peroxide, metal chelators, and under general metal starvation conditions. FolE_IB1 was important when zinc uptake was impaired in cells without the zinc importer ZupT (ZIP family) and in the presence of trimethoprim, an inhibitor of THF biosynthesis. FolE_IB2 was needed under conditions of low zinc and cobalt but high magnesium availability. Together, these data demonstrate that C. metallidurans requires all three enzymes to allow efficient growth under a variety of conditions.IMPORTANCETetrahydrofolate (THF) is an important cofactor in microbial biochemistry. This "Achilles heel" of metabolism has been exploited by anti-metabolites and antibiotics such as sulfonamide and trimethoprim. Since THF is essential for the synthesis of guanosine triphosphate (GTP) and THF biosynthesis starts from GTP, synthesis of both compounds forms a cooperative cycle. The first step of THF synthesis by GTP cyclohydrolases (FolEs) is metal dependent and catalyzed by zinc- or metal-promiscuous enzymes, so that the cooperative THF and GTP synthesis cycle may be influenced by the homeostasis of several metal cations, especially that of zinc. The metal-resistant bacterium C. metallidurans needs three FolEs to grow in environments with both high and low zinc and cadmium content. Consequently, bacterial metal homeostasis is required to guarantee THF biosynthesis.

Microaerobic insights into production of polyhydroxyalkanoates containing 3-hydroxyhexanoate via native reverse β-oxidation from glucose in Ralstonia eutropha H16

BackgroundRalstonia eutropha H16, a facultative chemolitoautotroph, is an important workhorse for bioindustrial production of useful compounds such as polyhydroxyalkanoates (PHAs). Despite the extensive studies to date, some of its physiological properties remain not fully understood.ResultsThis study demonstrated that the knallgas bacterium exhibited altered PHA production behaviors under slow-shaking condition, as compared to its usual aerobic condition. One of them was a notable increase in PHA accumulation, ranging from 3.0 to 4.5-fold in the mutants lacking of at least two NADPH-acetoacetyl-CoA reductases (PhaB1, PhaB3 and/or phaB2) when compared to their respective aerobic counterpart, suggesting the probable existence of (R)-3HB-CoA-providing route(s) independent on PhaBs. Interestingly, PHA production was still considerably high even with an excess nitrogen source under this regime. The present study further uncovered the conditional activation of native reverse β-oxidation (rBOX) allowing formation of (R)-3HHx-CoA, a crucial precursor for poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) [P(3HB-co-3HHx)], solely from glucose. This native rBOX led to the natural incorporation of 3.9 mol% 3HHx in a triple phaB-deleted mutant (∆phaB1∆phaB1∆phaB2-C2). Gene deletion experiments elucidated that the native rBOX was mediated by previously characterized (S)-3HB-CoA dehydrogenases (PaaH1/Had), β-ketothiolase (BktB), (R)-2-enoyl-CoA hydratase (PhaJ4a), and unknown crotonase(s) and reductase(s) for crotonyl-CoA to butyryl-CoA conversion prior to elongation. The introduction of heterologous enzymes, crotonyl-CoA carboxylase/reductase (Ccr) and ethylmalonyl-CoA decarboxylase (Emd) along with (R)-2-enoyl-CoA hydratase (PhaJ) aided the native rBOX, resulting in remarkably high 3HHx composition (up to 37.9 mol%) in the polyester chains under the low-aerated condition.ConclusionThese findings shed new light on the robust characteristics of Ralstonia eutropha H16 and have the potential for the development of new strategies for practical P(3HB-co-3HHx) copolyesters production from sugars under low-aerated conditions.Graphical

Screening of Antimicrobial Producing Bacteria from Berawe Beach Sand on Kampai Pangkalan Susu Island against Pathogenic Bacteria

Sand is naturally a place to live, grow and develop some marine animals and microorganisms, usually bacteria originating from the sea area that have a large number of bioactive compounds that can produce various kinds of secondary metabolites for further production of antimicrobials. The purpose of this study was to obtain bacteria that have the potential to produce antimicrobials and to characterize bacterial isolates on the sand of Berawe Beach, Kampai Island, Pangkalan Susu. In this study several stages were carried out, namely sampling, isolation, purification, morphological characterization, antimicrobial activity test, gram staining, biochemical test and determining the bacterial genus. The results of this study obtained 9 isolates (SP14A. SP15A, SP16A, SP24A, SP24B, SP35A, SP44A, SP44B and SP45A) which have the potential as antimicrobial producers. Characterization of antimicrobial bacterial isolates from the sand of Berawe Beach, Kampai Island, Pangkalan Susu, namely isolate SP14A, which is a gram- positive bacterium in the form of streptobacilli. SP15A, SP24B and SP44B isolates were coccus-shaped gram-positive bacteria. SP16A, SP35A, SP44A and SP45A isolates were gram-positive bacteria in the form of bacilli. And isolate SP24A is a gram-negative bacterium in the form of streptobacilli. All isolates produce catalase enzymes but do not use carbon and energy. Isolates that are motile (SP14A, SP15A, SP16A, SP24A, SP35A, SP44A and SP45A) can ferment glucose while non-motile (SP24B and SP44B) cannot ferment glucose. These bacteria come from the genera Bacillus, Micrococcus, LactoBacillus and Alcaligenes. Species of Bacillus pumilus, Bacillus subtilis, Bacillus firmus, LactoBacillus bulgaricus, Micrococcus luteus and Alcaligenes eutrophus.

Expanding the synthetic biology toolbox of Cupriavidus necator for establishing fatty acid production.

The Gram-negative betaproteobacterium Cupriavidus necator is a chemolithotroph that can convert carbon dioxide into biomass. Cupriavidus necator has been engineered to produce a variety of high-value chemicals in the past. However, there is still a lack of a well-characterized toolbox for gene expression and genome engineering. Development and optimization of biosynthetic pathways in metabolically engineered microorganisms necessitates control of gene expression via functional genetic elements such as promoters, ribosome binding sites (RBSs), and codon optimization. In this work, a set of inducible and constitutive promoters were validated and characterized in C. necator, and a library of RBSs was designed and tested to show a 50-fold range of expression for green fluorescent protein (gfp). The effect of codon optimization on gene expression in C. necator was studied by expressing gfp and mCherry genes with varied codon-adaptation indices and was validated by expressing codon-optimized variants of a C12-specific fatty acid thioesterase to produce dodecanoic acid. We discuss further hurdles that will need to be overcome for C. necator to be widely used for biosynthetic processes.

CO2-based production of phytase from highly stable expression plasmids in Cupriavidus necator H16

BackgroundExisting plasmid systems offer a fundamental foundation for gene expression in Cupriavidus necator; however, their applicability is constrained by the limitations of conjugation. Low segregational stabilities and plasmid copy numbers, particularly in the absence of selection pressure, pose challenges. Phytases, recognized for their widespread application as supplements in animal feed to enhance phosphate availability, present an intriguing prospect for heterologous production in C. necator. The establishment of stable, high-copy number plasmid that can be electroporated would support the utilization of C. necator for the production of single-cell protein from CO2.ResultsIn this study, we introduce a novel class of expression plasmids specifically designed for electroporation. These plasmids contain partitioning systems to boost segregation stability, eliminating the need for selection pressure. As a proof of concept, we successfully produced Escherichia coli derived AppA phytase in C. necator H16 PHB− 4 using these improved plasmids. Expression was directed by seven distinct promoters, encompassing the constitutive j5 promoter, hydrogenase promoters, and those governing the Calvin-Benson-Bassham cycle. The phytase activities observed in recombinant C. necator H16 strains ranged from 2 to 50 U/mg of total protein, contingent upon the choice of promoter and the mode of cell cultivation - heterotrophic or autotrophic. Further, an upscaling experiment conducted in a 1 l fed-batch gas fermentation system resulted in the attainment of the theoretical biomass. Phytase activity reached levels of up to 22 U/ml.ConclusionThe new expression system presented in this study offers a highly efficient platform for protein production and a wide array of synthetic biology applications. It incorporates robust promoters that exhibit either constitutive activity or can be selectively activated when cells transition from heterotrophic to autotrophic growth. This versatility makes it a powerful tool for tailored gene expression. Moreover, the potential to generate active phytases within C. necator H16 holds promising implications for the valorization of CO2 in the feed industry.

Gold nanoparticles activate hydrogenase synthesis and improve heterotrophic growth of Ralstonia eutropha H16.

Ralstonia eutropha is a facultative chemolithoautotrophic aerobic bacterium that grows using organic substrates or H2 and CO2. Hydrogenases (Hyds) are synthesized under lithoautotrophic, or energy-limited heterotrophic conditions and are used in enzyme fuel cells (EFC) as anodic catalysts. The effects of chemically synthesized gold nanoparticles (Au-NPs) on R. eutropha H16 growth, oxidation-reduction potential (ORP) kinetics, and H2-oxidizing Hyd activity were investigated in this study. Atomic force microscopy showed that thin, plate-shaped Au-NPs were in the nanoscale range with an average size of 5.68 nm. Compared with growth in medium without Au-NPs (control), the presence of Au-NPs stimulated growth, and resulted in a decrease in ORP to negative values. H2-oxidizing activity was not detected in the absence of Au-NPs, but activity was significantly induced (12 U/g CDW) after 24 h of growth with 18 ng/ml, increasing a further 4-fold after 72 h of growth. The results demonstrate that Au-NPs primarily influence the membrane-bound Hyd. In contrast to R. eutropha, Au-NPs had a negligible or negative effect on the growth, Hyd activity, and H2 production of Escherichia coli. The findings of this study offer new perspectives for the production of oxygen-tolerant Hyds and the development of EFCs.

Mobile genetic elements associated with utilization of dichloromethane and methanol as energy sources in Cupriavidus metallidurans.

Cupriavidus metallidurans strain PD11 isolated from laboratory waste drainage can use C1 compounds, such as dichloromethane (DCM) and methanol, as a sole carbon and energy source. However, strain CH34 (a type-strain) cannot grow in the medium supplemented with DCM. In the present study, we aimed to unravel the genetic elements underlying the utilization of C1 compounds by strain PD11. The genome subtraction approach indicated that only strain PD11 had several genes highly homologous to those of Herminiimonas arsenicoxydans strain ULPAs1. Moreover, a series of polymerase chain reaction (PCR) to detect the orthologs of H. arsenicoxydans genes and the comparative study of the genomes of three strains revealed that the 87.9 kb DNA fragment corresponding to HEAR1959 to HEAR2054 might be horizontally transferred to strain PD11. The 87.9 kb DNA fragment identified was found to contain three genes whose products were putatively involved in the metabolism of formaldehyde, a common intermediate of DCM and methanol. In addition, reverse transcription PCR analysis showed that all three genes were significantly expressed when strain PD11 was cultivated in the presence of DCM or methanol. These findings suggest that strain PD11 can effectively utilize the C1 compounds because of transfer of the mobile genetic elements from other bacterial species, for instance, from H. arsenicoxydans.

A bibliometric landscape of polyhydroxyalkanoates production from low-cost substrates by Cupriavidus necator and its perspectives for the Latin American bioeconomy

A bibliometric landscape of polyhydroxyalkanoates production from low-cost substrates by Cupriavidus necator and its perspectives for the Latin American bioeconomy

In Vivo DNA Assembly Using the PEDA Method.

Simple and efficient DNA assembly methods have been widely used in synthetic biology. Here, we provide the protocol for the recently developed PEDA (phage enzyme-assisted in vivo DNA assembly) method for direct in vivo assembly of individual DNA parts in multiple microorganisms, such as Escherichia coli, Ralstonia eutropha, Pseudomonas putida, Lactobacillus plantarum, and Yarrowia lipolytica. PEDA allows in vivo assembly of DNA fragments with homologous sequences as short as 5bp, and the efficiency is comparable to the prevailing in vitro DNA assembly, which will broadly boost the rapid progress of synthetic biology.

Engineering a probiotic Bacillus subtilis for acetaldehyde removal: A hag locus integration to robustly express acetaldehyde dehydrogenase.

We have addressed critical challenges in probiotic design to develop a commercially viable bacterial strain capable of removing the intestinal toxin, acetaldehyde. In this study, we report the engineering of the hag locus, a σD-dependent flagellin expression site, as a stable location for robust enzyme production. We demonstrate constitutive gene expression in relevant conditions driven by the endogenous hag promoter, following a deletion of the gene encoding a post-translational regulator of σD, FlgM, and a point mutation to abrogate the binding of the translational inhibitor CsrA. Reporter constructs demonstrate activity at the hag locus after germination, with a steady increase in heterologous expression throughout outgrowth and vegetative growth. To evaluate the chassis as a spore-based probiotic solution, we identified the physiologically relevant ethanol metabolic pathway and the subsequent accumulation of gut-derived acetaldehyde following alcohol consumption. We integrated a Cupriavidus necator aldehyde dehydrogenase gene (acoD) into the hag locus under the control of the flagellin promoter and observed a rapid reduction in acetaldehyde levels in gut-simulated conditions post-germination. This work demonstrates a promising approach for the development of genetically engineered spore-based probiotics.

The Discovery of Membrane Vesicle Biogenesis in the Polyhydroxybutyrate-non-producing Mutant Strain of Cupriavidus necator H16.

Extracellular membrane vesicles (MVs) caused by the artificial production of polyhydroxybutyrate (PHB) were previously detected in Escherichia coli. We herein observed MV biogenesis in the mutant strain (-PHB) of the natural PHB producer, Cupriavidus necator H16. This inverse relationship was revealed through comparative electron microscopic ana-lyses of wild-type and mutant strains. Based on these results, we speculate that a physiological relationship exists between MV biogenesis and PHB biosynthesis. Therefore, we propose the potential of MV biogenesis as a fermentative "stress marker" for monitoring the performance of target polymer-producing microbial platforms.

Revealing the functional potential of microbial community of activated sludge for treating tuna processing wastewater through metagenomic analysis.

Reports regarding the composition and functions of microorganisms in activated sludge from wastewater treatment plants for treating tuna processing wastewater remains scarce, with prevailing studies focusing on municipal and industrial wastewater. This study delves into the efficiency and biological dynamics of activated sludge from tuna processing wastewater, particularly under conditions of high lipid content, for pollutant removal. Through metagenomic analysis, we dissected the structure of microbial community, and its relevant biological functions as well as pathways of nitrogen and lipid metabolism in activated sludge. The findings revealed the presence of 19 phyla, 1,880 genera, and 7,974 species, with Proteobacteria emerging as the predominant phylum. The study assessed the relative abundance of the core microorganisms involved in nitrogen removal, including Thauera sp. MZ1T and Alicycliphilus denitrificans K601, among others. Moreover, the results also suggested that a diverse array of fatty acid-degrading microbes, such as Thauera aminoaromatica and Cupriavidus necator H16, could thrive under lipid-rich conditions. This research can provide some referable information for insights into optimizing the operations of wastewater treatment and identify some potential microbial agents for nitrogen and fatty acid degradation.

Optimizing Hexose Utilization Pathways of Cupriavidus necator for Improving Growth and L-Alanine Production under Heterotrophic and Autotrophic Conditions.

Cupriavidus necator is a versatile microbial chassis to produce high-value products. Blocking the poly-β-hydroxybutyrate synthesis pathway (encoded by the phaC1AB1 operon) can effectively enhance the production of C. necator, but usually decreases cell density in the stationary phase. To address this problem, we modified the hexose utilization pathways of C. necator in this study by implementing strategies such as blocking the Entner-Doudoroff pathway, completing the phosphopentose pathway by expressing the gnd gene (encoding 6-phosphogluconate dehydrogenase), and completing the Embden-Meyerhof-Parnas pathway by expressing the pfkA gene (encoding 6-phosphofructokinase). During heterotrophic fermentation, the OD600 of the phaC1AB1-knockout strain increased by 44.8% with pfkA gene expression alone, and by 93.1% with gnd and pfkA genes expressing simultaneously. During autotrophic fermentation, gnd and pfkA genes raised the OD600 of phaC1AB1-knockout strains by 19.4% and 12.0%, respectively. To explore the effect of the pfkA gene on the production of C. necator, an alanine-producing C. necator was constructed by expressing the NADPH-dependent L-alanine dehydrogenase, alanine exporter, and knocking out the phaC1AB1 operon. The alanine-producing strain had maximum alanine titer and yield of 784 mg/L and 11.0%, respectively. And these values were significantly improved to 998 mg/L and 13.4% by expressing the pfkA gene. The results indicate that completing the Embden-Meyerhof-Parnas pathway by expressing the pfkA gene is an effective method to improve the growth and production of C. necator.

Proteomic and morphological insights into the exposure of Cupriavidus metallidurans CH34 planktonic cells and biofilms to aluminium

Aluminium (Al) is one of the most popular materials for industrial and domestic use. Nevertheless, research has proven that this metal can be toxic to most organisms. This light metal has no known biological function and to date very few aluminium-specific biological pathways have been identified. In addition, information about the impact of this metal on microbial life is scarce. Here, we aimed to study the effect of aluminium on the metal-resistant soil bacterium Cupriavidus metallidurans CH34 in different growth modes, i.e. planktonic cells, adhered cells and mature biofilms. Our results indicated that despite a significant tolerance to aluminium (minimal inhibitory concentration of 6.25 mM Al₂(SO₄)₃.18H₂O), the exposure of C. metallidurans to a sub-inhibitory dose (0.78 mM) caused early oxidative stress and an increase in hydrolytic activity. Changes in the outer membrane surface of planktonic cells were observed, in addition to a rapid disruption of mature biofilms. On protein level, aluminium exposure increased the expression of proteins involved in metabolic activity such as pyruvate kinase, formate dehydrogenase and poly(3-hydroxybutyrate) polymerase, whereas proteins involved in chemotaxis, and the production and transport of iron scavenging siderophores were significantly downregulated.

Gas fermentation combined with water electrolysis for production of polyhydroxyalkanoate copolymer from carbon dioxide by engineered Ralstonia eutropha

A recycled-gas closed-circuit culture system was developed for safe autotrophic cultivation of a hydrogen-oxidizing, polyhydroxyalkanoate (PHA)-producing Ralstonia eutropha, using a non-combustible gas mixture with low-concentration of H2 supplied by water electrolysis. Automated feedback regulation of gas flow enabled input of H2, CO2, and O2 well balanced with the cellular demands, leading to constant gas composition throughout the cultivation. The engineered strain of R. eutropha produced 1.71 g/L of poly(3-hydroxybutyrate-co-12.5 mol% 3-hydroxyhexanoate) on a gas mixture of H2/CO2/O2/N2 = 4:12:7:77 vol% with a 69.2 wt% cellular content. Overexpression of can encoding cytosolic carbonic anhydrase increased the 3HHx fraction up to 19.6 mol%. The yields of biomass and PHA on input H2 were determined to be 72.9 % and 63.1 %, corresponding to 51.0 % and 44.2 % yield on electricity, respectively. The equivalent solar-to-biomass/PHA efficiencies were estimated to be 2.1–3.8 %, highlighting the high energy conversion capability of R. eutropha.

Investigating Mass Transfer and Reaction Engineering Characteristics in a Membrane Biofilm Using Cupriavidus necator H16.

Membrane biofilm reactors are a growing trend in wastewater treatment whereby gas-transfer membranes provide efficient bubbleless aeration. Recently, there has been a growing interest in using these bioreactors for industrial biotechnology using microorganisms that can metabolise gaseous substrates. Since gas fermentation is limited by the low solubilities of gaseous substrates in liquid media, it is critical to characterise mass transfer rates of gaseous substrates to enable the design of membrane biofilm reactors. The objective of this study is to measure and analyse mass transfer rates and reaction engineering characteristics for a single tube membrane biofilm reactor using Cupriavidus necator H16. At elevated Reynolds numbers, the dominant resistance for gas diffusion shifts from the liquid boundary layer to the membrane. The biofilm growth rate was observed to decrease after 260 μm at 96 h. After 144 h, some sloughing of the biofilm occurred. Oxygen uptake rate and substrate utilisation rate for the biofilm developed showed that the biofilm changes from a single-substrate limited regime to a dual-substrate-limited regime after 72 h which alters the localisation of the microbial activity within the biofilm. This study shows that this platform technology has potential applications for industrial biotechnology.

Integrated biorefinery strategy for poly(3-hydroxybutyrate) accumulation in Cupriavidus necator DSM 545 using a sugar rich syrup from cereal waste and acetate from gas fermentation

Poly(3-hydroxybutyrate) (PHB) is one of the most well-known biodegradable and biocompatible biopolymers produced by prokaryotic microorganisms. It belongs to the family of polyhydroxyalkanoates (PHAs), and it has gained significant attention in recent years due to its potential as a sustainable alternative to traditional petroleum-based plastics. Cupriavidus necator has been identified as a potential producer of PHB for industrial applications due to its ability to produce high amounts of the polymer under controlled conditions, using a wide range of waste substrates. In this study, the ability of Cupriavidus necator DSM 545 strain to produce PHB was tested in a fed-batch strategy providing two different organic substrates. The first is a sugar-based syrup (SBS), derived from cereal waste. The second is an acetate-rich medium obtained through CO2 -H2 fermentation by the acetogenic bacterium Acetobacterium woodii. The carbon sources were tested to improve the accumulation of PHB in the strain. C. necator DSM 545 proved to be able to grow and to perform high accumulation of biopolymer on waste substrates containing glucose, fructose, and acetate, reaching about 10 g/L of PHB, 83% of biopolymer accumulation in cell dry mass, in 48 h of fed-batch fermentation in 0.6 L working volume in a bioreactor. Moreover, a Life Cycle Assessment analysis was performed to evaluate the environmental impact of the process converting the sugar syrup alone and the integrated one. It demonstrated that the integrated process is more sustainable and that the most impactful step is the PHB production, followed by the polymer extraction.

Engineering artificial photosynthesis based on rhodopsin for CO2 fixation

Microbial rhodopsin, a significant contributor to sustaining life through light harvesting, holds untapped potential for carbon fixation. Here, we construct an artificial photosynthesis system which combines the proton-pumping ability of rhodopsin with an extracellular electron uptake mechanism, establishing a pathway to drive photoelectrosynthetic CO2 fixation by Ralstonia eutropha (also known as Cupriavidus necator) H16, a facultatively chemolithoautotrophic soil bacterium. R. eutropha is engineered to heterologously express an extracellular electron transfer pathway of Shewanella oneidensis MR-1 and Gloeobacter rhodopsin (GR). Employing GR and the outer-membrane conduit MtrCAB from S. oneidensis, extracellular electrons and GR-driven proton motive force are integrated into R. eutropha’s native electron transport chain (ETC). Inspired by natural photosynthesis, the photoelectrochemical system splits water to supply electrons to R. eutropha via the Mtr outer-membrane route. The light-activated proton pump - GR, supported by canthaxanthin as an antenna, powers ATP synthesis and reverses the ETC to regenerate NADH/NADPH, facilitating R. eutropha’s biomass synthesis from CO2. Overexpression of a carbonic anhydrase further enhances CO2 fixation. This artificial photosynthesis system has the potential to advance the development of efficient photosynthesis, redefining our understanding of the ecological role of microbial rhodopsins in nature.

Maximization of 3-hydroxyhexanoate fraction in poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) using lauric acid with engineered Cupriavidus necator H16

As polyhydroxybutyrate (P(3HB)) was struggling with mechanical properties, efforts have been directed towards increasing mole fraction of 3-hydroxyhexanoate (3HHx) in P(3HB-co-3HHx) to improve the properties of polyhydroxyalkanoates (PHAs). Although genetic modification had significant results, there were several issues related to cell growth and PHA production by deletion of PHA synthetic genes. To find out easier strategy for high 3HHx mole fraction without gene deletion, Cupriavidus necator H16 containing phaC2Ra-phaACn-phaJ1Pa was examined with various oils resulting that coconut oil gave the highest 3HHx mole fraction. When fatty acid composition analysis with GC–MS was applied, coconut oil was found to have very different composition from other vegetable oil containing very high lauric acid (C12) content. To find out specific fatty acid affecting 3HHx fraction, different fatty acids from caproic acid (C6) to stearic acid (C18) was evaluated and the 3HHx mole fraction was increased to 26.5 ± 1.6 % using lauric acid. Moreover, the 3HHx mole fraction could be controlled from 9 % to 31.1 % by mixing bean oil and lauric acid with different ratios. Produced P(3HB-co-3HHx) exhibited higher molecular than P(3HB-co-3HHx) from phaB-deletion mutant. This study proposes another strategy to increase 3HHx mole fraction with easier way by modifying substrate composition without applying deletion tools.