Osteoblast Cultures Research Articles

Comparison of physico-chemical properties of different types of orthopedic acrylic cement

Analyzing the chemical composition of different kinds of acrylic cement is necessary to understand their properties and suitability for curing bone defects. Conducting various chemical tests can give valuable insight into the composition, viscosity, and performance characteristics of each kind of cement, Therefore, our study aimed to find safety standards and the effectiveness of these products for medical applications. The polymeric characterization was determined by Nuclear Magnetic Resonance (H-NMR) spectroscopy and Fourier-transform infrared spectroscopy (FTIR). Additionally, gel permeation chromatography (GPC) was used to determine the molecular weight of poly methyl methacrylate (PMMA), which was between 4000 and 6000 Mw. The presence of methyl methacrylate (MMA) monomer observed in all cement within two minutes was determined using gas chromatography-mass spectrometry (GC-MS). Moreover, the images of all radiopaque compounds in the cement were evaluated using Field emission scanning electron microscopy (FESEM) and Energy Dispersive X-ray (EDAX-MAP). The study determined the glass transition (Tg) temperature and conducted differential scanning calorimetry (DCS) analysis for each type of cement. In addition, the setting time for various kinds of spinal cord cement was measured to be more than ten minutes. The percentage of benzoyl peroxide in each cement was determined using titration, ranging from 0.6% to 6%. Additionally, cytotoxicity studies were conducted on human osteoblasts (MG63) in cell culture. In this study, we tried to make a trend line for evaluation types of bone cement that would be applicable for both regulatory buddies and researchers in this field.

Exploring the Osteoinductive Potential of Bacterial Pyomelanin Derived from Pseudomonas aeruginosa in a Human Osteoblast Model.

Alkaptonuria (AKU) is a genetically determined disease associated with disorders of tyrosine metabolism. In AKU, the deposition of homogentisic acid polymers contributes to the pathological ossification of cartilage tissue. The controlled use of biomimetics similar to deposits observed in cartilage during AKU potentially may serve the development of new bone regeneration therapy based on the activation of osteoblasts. The proposed biomimetic is pyomelanin (PyoM), a polymeric biomacromolecule synthesized by Pseudomonas aeruginosa. This work presents comprehensive data on the osteoinductive, pro-regenerative, and antibacterial properties, as well as the cytocompatibility, of water-soluble (PyoMsol) or water-insoluble (PyoMinsol) PyoM. Both variants of PyoM support osteoinductive processes as well as the maturation of osteoblasts in cell cultures in vitro due to the upregulation of bone-formation markers, osteocalcin (OC), and alkaline phosphatase (ALP). Furthermore, the cytokines involved in these processes were elevated in cell cultures of osteoblasts exposed to PyoM: tumor necrosis factor (TNF)-α, interleukin (IL)-6, and IL-10. The PyoM variants are cytocompatible in a wide concentration range and limit the doxorubicin-induced apoptosis of osteoblasts. This cytoprotective PyoM activity is correlated with an increased migration of osteoblasts. Moreover, PyoMsol and PyoMinsol exhibit antibacterial activity against staphylococci isolated from infected bones. The osteoinductive, pro-regenerative, and antiapoptotic effects achieved through PyoM stimulation prompt the development of new biocomposites modified with this bacterial biopolymer for medical use.

Fucoxanthin alleviates the cytotoxic effects of cadmium and lead on a human osteoblast cell line.

Cadmium (Cd) and lead (Pb) are non-biodegradable heavy metals (HMs) that persistently contaminate ecosystems and accumulate in bones, where they exert harmful effects. This study aimed to investigate the protective effect of fucoxanthin (FX) against the chemical toxicity induced by Cd and Pb in human bone osteoblasts in vitro, using various biochemical and molecular assays. The effect of metals and FX on osteoblasts viability was assayed by MTT, then the effect of Pb, Cd, and FX on the cells' mitochondrial parameters was studied via assays for ATP, mitochondrial membrane potential (MMP), mitochondrial complexes, and lactate production. Also, the effect of metals on oxidative stress was assessed by reactive oxygen species, lipid peroxidation and antioxidant enzymes assays. Also the effect of FX and metals on apoptosis caspases and related genes was assessed. When Cd and Pb were added to human osteoblast cultures at concentrations ranging from 1-20μM for 72h, they significantly reduced osteoblast viability in a time and concentration-dependent manner. The cytotoxic effect of Cd on osteoblasts was greater than that of Pb, with estimated EC50 of 8 and 12μM, respectively, after 72h of exposure. FX (10 and 20μM) alleviated the cytotoxicity of the metals. Bioenergetics assays, including ATP, MMP, and mitochondrial complexes I and III activities, revealed that HMs at 1 and 10μM concentrations inhibited cellular bioenergetics after 72h of exposure. Cd and Pb also increased lipid peroxidation and reactive oxygen species while reducing catalase and superoxide dismutase antioxidant activities and oxidative stress-related genes. This was accompanied by increased caspases -3, -8, and-9 and Bax/bCl-2 ratio. Co-treatment with FX (10 and 20μM) mitigated the disruption of bioenergetics, oxidative damage, and apoptosis induced by the metals, showing a concentration-dependent pattern to varying extents. These findings strongly support the role of FX in managing toxicities induced by environmental pollutants in bones and in addressing bone diseases associated with molecular bases of oxidative stress, apoptosis, and bioenergetic disruption.

Synergistic NIR and ultrasound-responsive tellurium nanorods for enhanced antibacterial and osteogenic activity

Bacterial infections and deficient osteogenic activity are the primary factors contributing to the failure of orthopedic implants. In recent years, light- and sound-based external stimulus-responsive therapies have emerged as highly effective in killing drug-resistant bacteria. In this study, we successfully synthesized tellurium nanorods coated with bovine serum albumin (Te@BSA). This novel nanomaterial exhibits excellent biocompatibility and possesses near-infrared light (NIR) and ultrasound (US) synergistic response properties. At a concentration of 100 μg/mL, Te@BSA nanorods, under combined NIR and US treatment, achieved 94 % bacterial eradication against drug-resistant strains, while maintaining cell viability above 90 % in osteoblast cultures. This dual-modality approach minimizes the risk of local thermal damage associated with conventional photothermal therapy, enhancing osteogenic activity by up to 150 % upon NIR exposure. By combining photothermal therapy and sonodynamic therapy, we achieved a remarkable antibacterial effect and enhanced osteogenic capacities in a mild and controlled manner. This study successfully balances antibacterial and osteogenic capabilities. These light- and sound-based external stimulus-responsive strategies aslo offer new perspectives and valuable insights for the surface modification of orthopedic implants.

Development and characterization of an in vitro fluorescently tagged 3D bone-cartilage interface model.

Three-dimensional cultures are widely used to study bone and cartilage. These models often focus on the interaction between osteoblasts and osteoclasts or osteoblasts and chondrocytes. A culture of osteoblasts, osteoclasts and chondrocytes would represent the cells that interact in the joint and a model with these cells could be used to study many diseases that affect the joints. The goal of this study was to develop 3D bone-cartilage interface (3D-BCI) that included osteoblasts, osteocytes, osteoclasts, and cartilage. Fluorescently tagged cell lines were developed to assess the interactions as cells differentiate to form bone and cartilage. Mouse cell line, MC3T3, was labeled with a nuclear GFP tag and differentiated into osteoblasts and osteocytes in Matrigel. Raw264.7 cells transfected with a red cytoplasmic tag were added to the system and differentiated with the MC3T3 cells to form osteoclasts. A new method was developed to differentiate chondrocyte cell line ATDC5 in a cartilage spheroid, and the ATDC5 spheroid was added to the MC3T3 and Raw264.7 cell model. We used an Incucyte and functional analysis to assess the cells throughout the differentiation process. The 3D-BCI model was found to be positive for TRAP, ALP, Alizarin red and Alcian blue staining to confirm osteoblastogenesis, osteoclastogenesis, and cartilage formation. Gene expression confirmed differentiation of cells based on increased expression of osteoblast markers: Alpl, Bglap, Col1A2, and Runx2, cartilage markers: Acan, Col2A1, Plod2, and osteoclast markers: Acp5, Rank and Ctsk. Based on staining, protein expression and gene expression results, we conclude that we successfully developed a mouse model with a 3D bone-cartilage interface.

β-Tricalcium phosphate incorporated natural rubber latex membranes for calvarial bone defects: Physicochemical, in vitro and in vivo assessment

Natural rubber latex membrane (NRL) is a biocompatible macromolecule that stimulates angiogenesis and promotes bone repair. Similarly, β-tricalcium phosphate (β-TCP) is an osteoconductive and osteoinductive bioceramic widely used as a bone substitute. Here, we investigated the combined use of these biomaterials in the guided bone regeneration process for calvarial defects in rats. Physicochemical characterization was performed to evaluate the interaction between β-TCP and NRL. Membrane toxicity was assessed using MC3T3 osteoblasts culture and in vivo assays with Caenorhabditis elegans. Lastly, NRL membranes, NRL incorporated with β-TCP membranes (NRL-β-TCP), and a periosteum-only (control group) were tested on rodents. MC3T3 cells adhered to membranes, preserving their morphology and intercellular connections. NRL-β-TCP membranes demonstrated no toxicity in larvae, which maintained their sinusoidal wave shape. Tests results on rodents revealed statistical difference between the groups at 60 days post-operation. NRL-β-TCP (56.1 ± 14.0 %) had an average 1.48-fold higher than the control group (38.0 ± 9.1 %), with tissue production and bone remodeling. Our qualitative histological analyses revealed that membranes significantly accelerated bone formation without any signs of inflammatory reactions. We conclude that NRL-β-TCP has potential to be used for flat bone regeneration, with osteoconductive properties, being a cheap, biocompatible, and effective occlusive barrier.

Effects of Tranexamic Acid on Human Osteoblasts as Proxy for Fracture Healing.

To investigate the effect of tranexamic acid (TXA) through in vitro culture of primary human osteoblasts (HOB) and in vivo using an operative rat femur fracture model. It was hypothesized that there would not be any effect on fracture healing in both studies. Primary HOBs were exposed to varying concentrations of TXA over different time periods. Cells were assessed for viability, metabolism, and mineralization. For the in vivo model, fractures were created in the femora of adult rats, exposed to either TXA or saline, and then assessed for healing at different time points. A modified radiographic union score for tibia was used to evaluate radiographs, callus mineralization was assessed with microcomputed tomography, and biomechanical tests were performed. Overall, HOB viability and metabolism decreased as TXA concentration and exposure time increased. However, at concentrations below 56.44 mg/mL, HOB viability was not affected. Similarly, mineralization also decreased as TXA concentration and exposure time increased. In both groups, in vivo results demonstrated increasing radiographic healing, callus mineralization, and biomechanical strength as a function of time. There was a trend for increased healing in the TXA group at 6 weeks after fracture; however, the difference compared with untreated animals was not statistically significant. Although a degradation of HOB viability and metabolism occurred with increased TXA concentrations and exposure times, clinically relevant concentrations do not adversely affect HOB viability, metabolism, or mineralization. In addition, there were no noticeable adverse effects of TXA administration in the in vivo model.

Disulfiram ameliorates bone loss in ovariectomized mice by suppressing osteoclastogenesis.

Disulfiram (DSF), known as an anti-alcoholism drug, has been reported to suppress osteoclast differentiation in vitro; however, it remains uncertain whether DSF is effective in preventing osteoclastogenesis in vivo. This study aimed to investigate the effect of DSF administration in osteoporotic mice and its contribution to osteoclastogenesis in vivo. The bone phenotype of ovariectomized mice, both treated and untreated with DSF, was examined using microcomputed tomography analysis. Osteoclastic and osteoblastic parameters were assessed through bone morphometric analysis. The direct effect of DSF on osteoblastogenesis in vitro was evaluated via a primary osteoblast culture experiment. The expression of genes related to DSF targets (Nup85, Ccr2, and Ccr5) in osteoclast-lineage cells was examined using scRNA-seq analysis and flow cytometry analysis using the bone marrow cells from ovariectomized mice. The impact of DSF on osteoclast-lineage cells was assessed using primary cultures of osteoclasts. DSF administration ameliorated ovariectomy-induced bone loss and mitigated the increase of osteoclasts without affecting osteoblastogenesis. The scRNA-seq data revealed that osteoclast precursor cells expressed Nup85, Ccr2, and Ccr5. CCR2 and CCR5-positive cells in osteoclast precursor cells within bone marrow increased following ovariectomy, and this increase was canceled by DSF administration. Finally, we found that DSF had a significant inhibitory effect on osteoclastogenesis in the early stage by suppressing Tnfrsf11a expression. This study demonstrates that DSF could be a candidate for osteoporosis therapies because it suppresses osteoclastogenesis from an early stage in vivo.

CRISPR activation of Tfeb , a master regulator of autophagy and lysosomal biogenesis, in osteoblast lineage cells increases bone mass and strength.

Autophagy is a recycling pathway in which damaged or dysfunctional proteins, protein aggregates, and organelles are delivered to lysosomes for degradation. Insufficiency of autophagy is thought to contribute to several age-related diseases including osteoporosis. Consistent with this, elimination of autophagy from the osteoblast lineage reduces bone formation and causes low bone mass. However, whether increasing autophagy would benefit bone health is unknown. Here, we increased expression of the endogenous Transcription Factor EB gene ( Tfeb ) in osteoblast lineage cells in vivo via CRISPR activation. Tfeb overexpression stimulated autophagy and lysosomal biogenesis in osteoblasts. Tfeb overexpressing male mice displayed a robust increase in femoral and vertebral cortical thickness at 4.5 months of age. Histomorphometric analysis revealed that the increase in femoral cortical thickness was due to increased bone formation at the periosteal surface. Tfeb overexpression also increased femoral trabecular bone volume. Consistent with these results, bone strength was increased in Tfeb overexpressing mice. Female Tfeb overexpressing mice also displayed a progressive increase in bone mass over time and at 12 months of age had high cortical thickness and trabecular bone volume. This increase in vertebral trabecular bone volume was due to elevated bone formation. Osteoblastic cultures showed that Tfeb overexpression increased proliferation and osteoblast formation. Overall, these results demonstrate that stimulation of autophagy in osteoblast lineage cells promotes bone formation and strength and may represent an effective approach to combat osteoporosis.

SEV-mediated lipid droplets transferred from bone marrow adipocytes promote ferroptosis and impair osteoblast function

Osteoporosis is linked to increased bone marrow adipocyte (BMAd) proliferation, which displaces bone-forming cells and alters the local environment. The impact of BMAd lipid droplets on bone health and osteoblast function remains unclear. This study investigates the interplay between BMAd-derived lipid droplets and osteoblast functionality, focusing on ferroptosis pathways. Osteoblast cultures were treated with conditioned media from adipocytes to simulate in vivo conditions. High-throughput mRNA sequencing and Western blot analysis were used to profile changes in gene expression and protein levels related to ferroptosis, oxidative phosphorylation, and osteogenic markers. Cellular assays assessed the direct impact of lipid droplets on osteoblast activity. Results showed that osteoblasts exposed to adipocyte-conditioned media had increased intracellular lipid droplet accumulation, upregulation of ferroptosis-related genes and proteins, and downregulation of oxidative phosphorylation and osteoblast differentiation markers. Treatment with ferroptosis inhibitors reversed the detrimental effects on osteoblasts, indicating the functional relevance of this pathway in osteoporosis. BMAd-derived lipid droplets contribute to osteoblast dysfunction through ferroptosis induction. Inhibiting ferroptosis could preserve osteoblast function and combat osteoporosis-related bone issues, suggesting that modulating lipid metabolism and redox balance in bone cells may be promising for future treatments.

An In Vitro Orbital Flow Model to Study Mechanical Loading Effects on Osteoblasts.

Flow induced by an orbital shaker is known to produce shear stress and oscillatory flow, but the utility of this model for studying mechanical loading effects in osteoblasts is not well defined. To test this, osteoblasts derived from the long bones of adult male C57BL/6J mice were plated on 6-well plates and subjected to orbital shaking at various frequencies (0.7, 1.4, and 3.3 Hz) for 30 and 60 min in serum-free differentiation media. The shear stress on cells produced by 0.7, 1.4, and 3.3 Hz shaking frequencies were 1.6, 4.5, and 11.8 dynes/cm2, respectively. ALP activity measured 72 h after shaking (orbital flow) showed a significant increase at 0.7 and 1.4 Hz, but not at 3.3 Hz, compared to static controls. Orbital flow-induced mechanical stress also significantly increased (25%) osteoblast proliferation at a 0.7 Hz flow compared to static controls. Additionally, expression levels of bone formation markers Osf2, Hif1a, Vegf, and Cox2 were significantly increased (1.5- to 3-fold, p < 0.05) in cells subjected to a 0.7 Hz flow compared to non-loaded control cells. We also evaluated the effect of orbital flow on key signaling pathways (mTOR, JNK, and WNT) known to mediate mechanical strain effects on osteoblasts. We found that blocking mTOR and WNT signaling with inhibitors significantly reduced (20-30%) orbital flow-induced ALP activity compared to cells treated using a vehicle. In contrast, inhibition of JNK signaling did not affect flow-induced osteoblast differentiation. In conclusion, our findings show that the flow produced by an orbital shaker at a lower frequency is an appropriate inexpensive model for studying the molecular pathways mediating mechanical strain effects on primary cultures of osteoblasts in vitro.

Development of polyvinyl alcohol nanofiber scaffolds loaded with flaxseed extract for bone regeneration: phytochemicals, cell proliferation, adhesion, and osteogenic gene expression.

Introduction: Bone tissue engineering seeks innovative materials that support cell growth and regeneration. Electrospun nanofibers, with their high surface area and tunable properties, serve as promising scaffolds. This study explores the incorporation of flaxseed extract, rich in polyphenolic compounds, into polyvinyl alcohol (PVA) nanofibers to improve their application in bone tissue engineering. Methods: High-performance liquid chromatography (HPLC) identified ten key compounds in flaxseed extract, including polyphenolic acids and flavonoids. PVA nanofibers were fabricated with 30 wt.% flaxseed extract (P70/E30) via electrospinning. We optimized characteristics like diameter, hydrophilicity, swelling behavior, and hydrolytic degradation. MG-63 osteoblast cultures were used to assess scaffold efficacy through cell adhesion, proliferation, viability (MTT assay), and differentiation. RT-qPCR measured expression of osteogenic genes RUNX2, COL1A1, and OCN. Results: Flaxseed extract increased nanofiber diameter from 252nm (pure PVA) to 435nm (P70/E30). P70/E30 nanofibers showed higher cell viability (102.6% vs. 74.5% for pure PVA), although adhesion decreased (151 vs. 206 cells/section). Notably, P70/E30 enhanced osteoblast differentiation, significantly upregulating RUNX2, COL1A1, and OCN genes. Discussion: Flaxseed extract incorporation into PVA nanofibers enhances bone tissue engineering by boosting osteoblast proliferation and differentiation, despite reduced adhesion. These properties suggest P70/E30's potential for regenerative medicine, emphasizing scaffold optimization for biomedical applications.

A detailed methodology for a three-dimensional, self-structuring bone model that supports the differentiation of osteoblasts towards osteocytes and the production of a complex collagen-rich mineralised matrix

Background There are insufficient in vitro bone models that accommodate long-term culture of osteoblasts and support their differentiation to osteocytes. The increased demand for effective therapies for bone diseases, and the ethical requirement to replace animals in research, warrants the development of such models. Here we present an in-depth protocol to prepare, create and maintain three-dimensional, in vitro, self-structuring bone models that support osteocytogenesis and long-term osteoblast survival (&gt;1 year). Methods Osteoblastic cells are seeded on a fibrin hydrogel, cast between two beta-tricalcium phosphate anchors. Analytical methods optimised for these self-structuring bone model (SSBM) constructs, including RT-qPCR, immunofluorescence staining and XRF, are described in detail. Results Over time, the cells restructure and replace the initial matrix with a collagen-rich, mineralising one; and demonstrate differentiation towards osteocytes within 12 weeks of culture. Conclusions Whilst optimised using a secondary human cell line (hFOB 1.19), this protocol readily accommodates osteoblasts from other species (rat and mouse) and origins (primary and secondary). This simple, straightforward method creates reproducible in vitro bone models that are responsive to exogenous stimuli, offering a versatile platform for conducting preclinical translatable research studies.

Advancing osseointegration research: A dynamic three-dimensional (3D) in vitro culture model for dental implants

Background/purposeIn-vitro studies are essential for understanding cellular responses, but traditional culture systems often neglect the three-dimensional (3D) structure of real implants, leading to limitations in cellular recruitment and behavior largely governed by gravity. The objective of this study was to pioneer a novel 3D dynamic osteoblastic culture system for assessing the biological capabilities of dental implants in a more clinically and physiologically relevant manner. Materials and methodsRat bone marrow-derived osteoblasts were cultured in a 24-well dish with a vertically positioned dental implant. Controlled rotation using a 3D rotator with 3° tilts was applied. Cell attachment, proliferation, and differentiation on implant surfaces were evaluated in response to different surface topographies, physicochemical properties, and local environments. ResultsAmong the tested rotational speeds (0, 10, 30, 50 rpm), optimal osteoblast attachment and proliferation were observed at 30 rpm. A linear correlation was found between cell attachment and rotation speed up to 30 rpm, declining at 50 rpm. Alkaline phosphatase (ALP) activity and mineralized matrix formation were elevated on newly acid-etched, hydrophilic surfaces compared to their 4-week-old hydrophobic surfaces. Sandblasted implants showed higher ALP activity and matrix mineralization. Adding N-acetyl cysteine to the culture medium increased ALP activity and mineralization. ConclusionOsteoblasts successfully attached, proliferated, and mineralized on dental implants in vitro under optimized dynamic conditions. This system differentiated the biological capabilities of implants with varying surface topographies, wettability, and biochemically modulated environments. These findings support developing a 3D dynamic dental implant culture model, advancing osseointegration research and innovating dental implant designs.

Randomized split-mouth clinical trial comparing osteoblastic activity and osteogenic potential of autogenous particle harvesting during implant surgery without irrigation and with irrigation.

To compare the osteoblastic activity and osteogenic potential of autogenous particle harvesting during implant surgery using low-speed drilling without irrigation and high-speed drilling with irrigation. Thirty patients with bilateral missing teeth of 3.6 and 4.6 were randomized into two groups (Group 1: low-speed drilling without irrigation and Group 2: high-speed drilling with irrigation) and 60 single dental implants were placed. The temperature at the tip of each drill was recorded and the harvested bone was weighed; particle size and Ca and P levels were also analyzed. After osteoblast culture, cell viability, cell cycle assay, cell migration, vascular endothelial growth factor (VEGF) concentration, and mineralized nodule formation were assessed. Although the temperature of the drills was slightly higher in Group 1, no statistically significant differences were observed (p ≤ 0.05); however, the amount of harvested bone was higher (p < 0.001) and the size of the particles was higher (p = 0.019). In relation to osteoblastic activity and osteogenic potential, higher cell proliferation, higher number of cells in G2/M and S phases, higher cell migration capacity, higher VEGF concentration, and higher amount of mineralized nodule formation were observed in Group 1. Low-speed drilling without irrigation does not result in a significant increase in bone temperature compared to conventional drilling. However, a greater amount of bone is obtained; in addition, osteoblastic activity and osteogenic potential are higher with this technique, but further clinical studies are necessary.

In Vitro Study of the Proliferation of MG63 Cells Cultured on Five Different Titanium Surfaces.

Five types of titanium discs placed in contact with osteoblast cultures of osteosarcomas were studied. The materials had different roughness. Scanning electron microscopy (SEM) photos were taken before the in vitro culture to analyze the surfaces, and at the end of the culturing time, the different gene expressions of a broad pattern of proteins were evaluated to analyze the osteoblast response, as indicated in the scientific literature. It was demonstrated that the responses of the osteoblasts were different in the five cultures in contact with the five titanium discs with different surfaces; in particular, the response in the production of some proteins was statistically significant. The key role of titanium surfaces underlines how it is still possible to carry out increasingly accurate and targeted studies in the search for new surfaces capable of stimulating a better osteoblastic response and the long-term maintenance of osteointegration.

A detailed methodology for a three-dimensional, self-structuring bone model that supports the differentiation of osteoblasts towards osteocytes and the production of a complex collagen-rich mineralised matrix.

There are insufficient in vitro bone models that accommodate long-term culture of osteoblasts and support their differentiation to osteocytes. The increased demand for effective therapies for bone diseases, and the ethical requirement to replace animals in research, warrants the development of such models.Here we present an in-depth protocol to prepare, create and maintain three-dimensional, in vitro, self-structuring bone models that support osteocytogenesis and long-term osteoblast survival (>1 year). Osteoblastic cells are seeded on a fibrin hydrogel, cast between two beta-tricalcium phosphate anchors. Analytical methods optimised for these self-structuring bone model (SSBM) constructs, including RT-qPCR, immunofluorescence staining and XRF, are described in detail. Over time, the cells restructure and replace the initial matrix with a collagen-rich, mineralising one; and demonstrate differentiation towards osteocytes within 12 weeks of culture. Whilst optimised using a secondary human cell line (hFOB 1.19), this protocol readily accommodates osteoblasts from other species (rat and mouse) and origins (primary and secondary). This simple, straightforward method creates reproducible in vitro bone models that are responsive to exogenous stimuli, offering a versatile platform for conducting preclinical translatable research studies.

Influence of Titanium Surface Residual Stresses on Osteoblastic Response and Bacteria Colonization.

Grit basting is the most common process applied to titanium dental implants to give them a roughness that favors bone colonization. There are numerous studies on the influence of roughness on osseointegration, but the influence of the compressive residual stress associated with this treatment on biological behavior has not been determined. For this purpose, four types of surfaces have been studied using 60 titanium discs: smooth, smooth with residual stress, rough without stress, and rough with residual stress. Roughness was studied by optic interferometry; wettability and surface energy (polar and dispersive components) by contact angle equipment using three solvents; and residual stresses by Bragg-Bentano X-ray diffraction. The adhesion and alkaline phosphatase (ALP) levels on the different surfaces were studied using Saos-2 osteoblastic cultures. The bacterial strains Streptococcus sanguinis and Lactobacillus salivarius were cultured on different surfaces, determining the adhesion. The results showed that residual stresses lead to increased hydrophilicity on the surfaces, as well as an increase in surface energy, especially on the polar component. From the culture results, higher adhesion and higher ALP levels were observed in the discs with residual stresses when compared between smooth and roughened discs. It was also found that roughness was the property that mostly influenced osteoblasts' response. Bacteria colonize rough surfaces better than smooth surfaces, but no changes are observed due to residual surface tension.

Engineering Precise Interconnected Porosity in β-Tricalcium Phosphate (β-TCP) Matrices by Means of Top-Down Digital Light Processing.

This study evaluated the biocompatibility and accuracy of 3D-printed β-tricalcium phosphate (β-TCP) pure ceramic scaffolds. A specific shaping process associating a digital light processing (DLP) 3D printer and a heat treatment was developed to produce pure β-TCP scaffolds leaving no polymer binder residue. The β-TCP was characterised using X-ray diffraction, infrared spectroscopy and the detection of pollutants. The open porosity of produced matrices and their resorption were studied by hydrostatic weighing and calcium release measures. The biocompatibility of the printed matrices was evaluated by mean of osteoblast cultures. Finally, macroporous cubic matrices were produced. They were scanned using a micro-Computed Tomography scanner (micro-CT scan) and compared to their numeric models. The results demonstrated that DLP 3D printing with heat treatment produces pure β-TCP matrices with enhanced biocompatibility. They also demonstrated the printing accuracy of our technique, associating top-down DLP with the sintering of green parts. Thus, this production process is promising and will enable us to explore complex phosphocalcic matrices with a special focus on the development of a functional vascular network.

Cellular response of advanced triple cultures of human osteocytes, osteoblasts and osteoclasts to high sulfated hyaluronan (sHA3)

Bone remodelling, important for homeostasis and regeneration involves the controlled action of osteoblasts, osteocytes and osteoclasts. The present study established a three-dimensional human in vitro bone model as triple culture with simultaneously differentiating osteocytes and osteoclasts, in the presence of osteoblasts. Since high sulfated hyaluronan (sHA3) was reported as a biomaterial to enhance osteogenesis as well as to dampen osteoclastogenesis, the triple culture was exposed to sHA3 to investigate cellular responses compared to the respective bone cell monocultures. Osteoclast formation and marker expression was stimulated by sHA3 only in triple culture. Osteoprotegerin (OPG) gene expression and protein secretion, but not receptor activator of NF-κB ligand (RANKL) or sclerostin (SOST), were strongly enhanced, suggesting an important role of sHA3 itself in osteoclastogenesis with other targets than indirect modulation of the RANKL/OPG ratio. Furthermore, sHA3 upregulated osteocalcin (BGLAP) in osteocytes and osteoblasts in triple culture, while alkaline phosphatase (ALP) was downregulated.