Culture Bottles Research Articles

Clinical Utility of Blood Culture Identification 2 Panel in Flagged Blood Culture Samples from the Intensive Care Unit of a Tertiary Care Hospital.

The availability of rapid diagnostic platforms for positive blood cultures has accelerated the speed at which the clinical microbiology laboratory can identify the causative organism and facilitate early appropriate antimicrobial therapy. There is a paucity of data regarding the clinical utility of the blood culture identification 2 (BCID2) panel test and its correlation with phenotypic drug susceptibility testing (DST) in flagged blood culture bottles from intensive care units (ICUs) in countries such as India, which have high rates of multidrug-resistant gram-negative bacteria (MDR-GNB). We conducted a retrospective observational study in a tertiary care ICU on 200 patients above 18 years of age in whom a BCID2 test was ordered when blood cultures flagged positive. We found 99% concordance between BCID2 and cultures in the identification of bacteria and yeasts and 96.5% concordance between phenotypic and genotypic DST. Furthermore, BCID2 was available about 1.5 days earlier than conventional ID and DST and played a key role in tailoring antimicrobials in 82.5% of the patients. Polymyxin-based therapy was discontinued earlier after an empiric dose in 138 patients (69%) based on BCID2 reports. In critically ill patients with monomicrobial bacteremia, BCID2 rapidly identifies bacteria and antimicrobial resistance (AMR) genes and is significantly faster than conventional culture and sensitivity testing. Antibiotics were escalated in more than a third of patients and de-escalated in almost a fifth on the same day. We recommend that all ICUs routinely incorporate the test in their antibiotic decision-making process and in antimicrobial stewardship. Vineeth VK, Nambi PS, Gopalakrishnan R, Sethuraman N, Ramanathan Y, Chandran C, et al. Clinical Utility of Blood Culture Identification 2 Panel in Flagged Blood Culture Samples from the Intensive Care Unit of a Tertiary Care Hospital. Indian J Crit Care Med 2024;28(5):461-466.

Use of flow cytometry method to detect contaminations of platelet suspensions

In this study, it was aimed to investigate bacterial contamination in apheresis platelet suspensions (APS) by automated blood culture system and flow cytometry method (FCM).33 spiked APS each using 11 bacterial strains (5 standard strains, 6 clinical isolates), were prepared in three different dilutions (1–10, 10–50, 50-100 cfu/mL), incubated in two different temperatures (35–37 °C and 22–24 °C) and different incubation times (18–96 h) evaluated by FCM. This three different dilutions were also inoculated into special platelet culture bottles (BacT/ALERT® BPA) and loaded into the blood culture system. Additionally 80 APSs routinely prepared in the Transfusion Center were evaluated by both FCM and the blood culture system. Platelets were lysed by freeze-thaw method.All spiked samples were positive with BacT/ALERT® BPA in 12–18 h. In 96 h incubation at 22–24 °C, the presence of bacteria was detected by FCM in all other samples (31/33) except low dilutions (1–10 and 10–100 CFU/ml) of K.pneumoniae standard strain. In the 35–37 °C, the presence of bacteria was detected by FCM in all samples (33/33) after 48 h of incubation. In routine APS one sample detected as positive (Bacillus simplex) with BacT/ALERT® BPA and no positivity was detected by FCM.The freeze-thaw method, which we have optimized for the lysis of platelets, is very practical and can be easily applied. The BacT/ALERT® system has been found to be very sensitive in detecting bacterial contamination in PSs. Flow cytometry method has been found to be successful, fast, easy to use and low cost in detecting bacterial contamination in PSs.

Evaluation of the QMAC-dRAST System Version 2.5 for Rapid Antimicrobial Susceptibility Testing of Gram-Negative Bacteria From Positive Blood Culture Broth and Subcultured Colony Isolates.

Rapid antimicrobial susceptibility testing (AST) for bloodstream infections (BSIs) facilitates the optimization of antimicrobial therapy, preventing antimicrobial resistance and improving patient outcomes. QMAC-dRAST (QuantaMatrix Inc., Korea) is a rapid AST platform based on microfluidic chip technology that performs AST directly using positive blood culture broth (PBCB). This study evaluated the performance of QMAC-dRAST for Gram-negative bacteria using PBCB and subcultured colony isolates, comparing it with that of VITEK 2 (bioMérieux, France) using broth microdilution (BMD) as the reference method. We included 141 Gram-negative blood culture isolates from patients with BSI and 12 carbapenemase-producing clinical isolates of Enterobacterales spiked into blood culture bottles. QMAC-dRAST performance was evaluated using PBCB and colony isolates, whereas VITEK 2 and BMD were tested only on colony isolates. For PBCB, QMAC-dRAST achieved 92.1% categorical agreement (CA), 95.3% essential agreement (EA), with 1.8% very major errors (VMEs), 3.5% major errors (MEs), and 5.2% minor errors (mEs). With colony isolates, it exhibited 92.5% CA and 95.1% EA, with 2.0% VMEs, 3.2% MEs, and 4.8% mEs. VITEK 2 showed 94.1% CA and 96.0% EA, with 4.3% VMEs, 0.4% MEs, and 4.3% mEs. QMAC-dRAST yielded elevated error rates for specific antimicrobial agents, with high VMEs for carbapenems and aminoglycosides. The median time to result for QMAC-dRAST was 5.9 h for PBCB samples and 6.1 h for subcultured colony isolates. The QMAC-dRAST system demonstrated considerable strengths and comparable performance to the VITEK 2 system; however, challenges were discerned with specific antimicrobial agents, underlining a necessity for improvement.

Assessment of Adequate Blood Culture Incubation Time to Accentuate Clinically Relevant Results from Blood Culture Instrument and Media System in a Tertiary Care Hospital Lahore

Background: Bloodstream infections necessitate rapid identification and management. Automated blood culture systems have revolutionized diagnostic microbiology by expediting pathogen detection and enabling effective clinical interventions. This study assesses the optimal incubation period for blood cultures in a tertiary healthcare setting, aiming to enhance diagnostic accuracy and support antibiotic stewardship. Objective: To evaluate the adequacy of incubation times in blood cultures for producing clinically significant results using an automated system in a tertiary care setting. Methods: This cross-sectional descriptive study was conducted at the Microbiology Section of Combined Military Hospital, Lahore, from October 2022 to March 2023. All patient blood samples processed through the Bactec/Alert system were studied. Positive samples were cultured on Blood and MacConkey agar and incubated at 35 ± 2°C for 24 hours. Positivity rates, contamination, and patient demographics were analyzed using the Laboratory Information Management System. Results: Of the 8,216 blood culture bottles processed, 490 (5.96%) were flagged as positive. Early detection within the first 24 hours was noted in 41.63% (n=204) of cases, with subsequent detections on the second day at 58.65% (n=258), the third day at 5.30% (n=26), and the fourth day at 0.20% (n=1). The isolated pathogens included gram-positive organisms (16.32%, n=80), gram-negative organisms (80.20%, n=393), and Candida spp. (3.46%, n=17). Conclusion: Timely and effective blood culturing is crucial for the diagnostic confirmation of bacteremia, enabling appropriate pathogen identification and antimicrobial therapy. Shortening detection times can significantly impact clinical outcomes, reduce healthcare costs, and promote antimicrobial stewardship.

PLEURAL FLUID CULTURE USING BLOOD CULTURE BOTTLES AND STERILE SYRINGES IN PATIENTS WITH PARAPNEUMONIC EFFUSION

Objectives: To determine the frequency of positive pleural fluid Culture by utilizing blood culture bottles and sterile syringes in patients with Para pneumonic effusions Material and Methods: This prospective cross-sectional study recruited 386 patients with suspected para pneumonic effusion using a non-probability sampling technique from a single-center study setting of Lady Reading Hospital (LRH) Peshawar, KPK. The total duration of the study was six months. Sample selection was done using preset criteria. The data obtained on the validated questionnaire was analyzed using SPSS version 2.0. Results: The age distribution among 386 patients was analyzed which showed 158(41%) patients ranging between 18-40 years old, and 228(59%) in the 41-70 age range. The mean age was 39 years with SD ± 10.33. Positive pleural fluid Culture was obtained from 44 percent while 56 percent were negative for any growth on pleural fluid culture. Furthermore, the 44% Positive pleural fluid Culture yielded organisms in 59% of blood culture bottles and 30% in sterile syringes. Conclusion: Analysis of the data concluded that the blood culture bottles when used for pleural fluid culture yielded organisms more effectively as compared to the sterile syringes used for the same purpose, hence it can be evident that blood culture bottles have more sensitivity for pleural fluid organisms growth as compared to sterile syringes. Key Words: Para-pneumonic effusions, Pleural fluid cultures, Blood culture bottle, Sterile syringes.

Proteomic assay for rapid characterisation of Staphylococcus aureus antimicrobial resistance mechanisms directly from blood cultures.

Staphylococcus aureus is one of the most common pathogens causing bloodstream infection. A rapid characterisation of resistance to methicillin and, occasionally, to aminoglycosides for particular indications, is therefore crucial to quickly adapt the treatment and improve the clinical outcomes of septic patients. Among analytical technologies, targeted liquid chromatography-tandem mass spectrometry (LC-MS/MS) has emerged as a promising tool to detect resistance mechanisms in clinical samples. A rapid proteomic method was developed to detect and quantify the most clinically relevant antimicrobial resistance effectors in S. aureus in the context of sepsis: PBP2a, PBP2c, APH(3')-III, ANT(4')-I, and AAC(6')-APH(2''), directly from positive blood cultures and in less than 70min including a 30-min cefoxitin-induction step. The method was tested on spiked blood culture bottles inoculated with 124 S.aureus, accounting for the known genomic diversity of SCCmec types and the genetic background of the strains. This method provided 99% agreement for PBP2a (n = 98/99 strains) detection. Agreement was 100% for PBP2c (n = 5/5), APH(3')-III (n = 16/16), and ANT(4')-I (n = 20/20), and 94% for AAC(6')-APH(2'') (n = 16/17). Across the entire strain collection, 100% negative agreement was reported for each of the 5 resistance proteins. Additionally, relative quantification of ANT(4')-I expression allowed to discriminate kanamycin-susceptible and -resistant strains, in all strains harbouring the ant(4')-Ia gene. The LC-MS/MS method presented herein demonstrates its ability to provide a reliable determination of S. aureus resistance mechanisms, directly from positive blood cultures and in a short turnaround time, as required in clinical laboratories.

Delay in the diagnosis of Brucella abortus bacteremia in a nonendemic country: a case report

BackgroundIt is challenging to diagnose brucellosis in nonendemic regions because it is a nonspecific febrile disease. The accurate identification of Brucella spp. in clinical microbiology laboratories (CMLs) continues to pose difficulties. Most reports of misidentification are for B. melitensis, and we report a rare case of misidentified B. abortus.Case presentationA 67-year-old man visited an outpatient clinic complaining of fatigue, fever, and weight loss. The patient had a history of slaughtering cows with brucellosis one year prior, and his Brucella antibody tests were negative twice. After blood culture, the administration of doxycycline and rifampin was initiated. The patient was hospitalized due to a positive blood culture. Gram-negative coccobacilli were detected in aerobic blood culture bottles, but the CML's lack of experience with Brucella prevented appropriate further testing. Inaccurate identification results were obtained for a GN ID card of VITEK 2 (bioMérieux, USA) and matrix-assisted laser desorption ionization–time of flight mass spectrometry (MALDI–TOF MS) using a MALDI Biotyper (Bruker, Germany). The strain showed 100.0% identity with Brucella spp. according to 16S rRNA sequencing. MALDI–TOF MS peaks were reanalyzed using the CDC MicrobeNet database to determine Brucella spp. (score value: 2.023). The patient was discharged after nine days of hospitalization and improved after maintaining only doxycycline for six weeks. The isolate was also identified as Brucella abortus by genomic evidence.ConclusionAutomated identification instruments and MALDI–TOF MS are widely used to identify bacteria in CMLs, but there are limitations in accurately identifying Brucella spp. It is important for CMLs to be aware of the possibility of brucellosis through communication with clinicians. Performing an analysis with an additional well-curated MALDI–TOF MS database such as Bruker security-relevant (SR) database or CDC MicrobeNet database is helpful for quickly identifying the genus Brucella.

Rapid colorimetric polymyxin B microelution directly from positive blood bottles: because patients with serious infections should not have to wait for results of culture-based methodologies.

To evaluate the performance of the rapid colorimetric polymyxin B microelution (RCPEm) in determining polymyxin B resistance directly from Enterobacterales-positive blood cultures. A set volume of positive blood culture bottles (diluted 1:10) was inoculated into a glucose-broth-phenol red solution (NP solution), where a polymyxin B disk was previously eluted (final concentration of 3µg/mL). Test was read each 1h for up to 4h. Color change from red/orange to yellow indicated resistant isolates. Results were compared to the reference method, broth microdilution (BMD), performed from colonies grown on solid media from the same blood culture bottle. One hundred fifty-two Enterobacterales-positive blood cultures were evaluated, 22.4% (34/152) of them resistant to polymyxin B (including 6.6% with borderline MICs). When performing directly from positive blood cultures (RCPEm-BC), specificity and sensitivity were 99.1% and 94.1%, respectively. Of note, 79.4% (27/34) of truly resistant isolates required 3h of incubation, compared to the 18 ± 2h incubation that microtiter plates of BMD demand before reading can be performed. RCPEm directly from blood cultures has great potential to be part of the routine of clinical microbiology laboratories to establish polymyxin B susceptibility, impacting outcome of patients with bloodstream infections caused by carbapenem-resistant Enterobacterales.

Enhancing pneumococcal bacteraemia diagnosis: A comparative assessment of culture-independent assays (MALDI–TOF–MS Sepsityper® module and a lateral flow inmunochromatography test)

IntroductionPneumococcal bacteraemia is a major contributor to global morbidity and mortality. Traditional culture-based methods lack sensitivity and are time-consuming. This study aimed to assess the effectiveness of two culture-independent assays, the MALDI–TOF–MS Sepsityper® module and the lateral flow inmunochromatography test (LFICT) with the Standard F® Streptococcus pneumoniae, directly from positive blood culture (BC) bottles. MethodsA prospective study was conducted from December 2021 to July 2022. For all BC positives for S. pneumoniae a double centrifugation protocol was implemented. The resulting pellet was subsequently processed using both techniques. ResultsThe LFICT showed exceptional performance with 100% sensitivity and specificity, outperforming the MALDI–TOF–MS Sepsityper® module, which achieved 85.2% sensitivity and 100% specificity. Nevertheless, the combination of these assays offers a robust and comprehensive approach to diagnosis. ConclusionsThe simultaneous use of both techniques offers a promising alternative that can be integrated into routine practices directly from BC samples.

Comparison of time-to-detection of Mindray TDR and BacT/ALERT®3D blood culture systems using simulated blood cultures

ABSTRACT Purpose Blood culture (BC) is the standard for diagnosing bloodstream infections. Available blood culture (BC) systems have been developed to shorten the time to detection (TTD) of positive BCs. This study aimed to evaluate the performance of the Mindray TDR automatic BC system by comparing it with the BacT/ALERT®3D system. Methods Sixteen reference strains and 14 clinical isolates were used. Serial dilutions were prepared from all bacterial and yeast colonies with a final concentration of 100 CFU/ml and 10 CFU/ml. The prepared solutions were simultaneously inoculated into the bottles of both systems and placed in blood culture devices. Results Three hundred and fifty-two (176 BacT/ALERT®3D and 176 Mindray TDR-X060) blood culture bottles were evaluated, 336 aerobic and 16 anaerobic. At both 10 CFU/ml and 100 CFU/ml dilution, there was no significant difference between the two systems in terms of mean detection times for all isolates (p = 0.965, p = 0.245). When evaluated according to the type of organism, the detection time of gram-positive bacteria at 10 CFU/ml dilution was significantly shorter in the BacT/ALERT system (p = 0.019), whereas detection time for yeasts was significantly shorter with the Mindray system (p = 0.047). The number of anaerobic bacteria was too small to draw statistical conclusions, but we observed a trend of shorter detection times in the Mindray TDR-X060 system. Conclusion Two systems with similar operating principles showed different concentrations-dependent performances in terms of positivity detection times depending on the type of microorganism. Mindray TDR-X060 system has been found to be safe to use at high concentrations with this at lower concentrations further comparative studies are needed on the newly introduced Mindray system.

Identifying organisms directly from BacT/Alert FAN plus blood culture bottles using Vitek MS in a state-wide laboratory network

Identifying organisms directly from positive blood culture bottles using matrix-assisted laser desorption-ionisation time-of-flight mass spectrometry (MALDI-TOF MS) has many advantages to patients, clinical services, and laboratories. However, few published methods have demonstrated good performance using the current BioMérieux culture bottles and MALDI-TOF system: BacT/Alert FAN plus and Vitek MS. The effect of transporting bottles on test performance has not been assessed for any direct-from-bottle MS method. In this study, 802 positive blood culture bottles were analysed including 234 requiring inter-laboratory transport, using a method involving protein extraction with formic acid and acetonitrile. Correct identification rates were high for Staphylococcus aureus (58/58 of new diagnostic samples), Enterococcus faecalis (27/27), Gram-negative bacilli (160/176, 90.1%), and coagulase-negative Staphylococcus species (108/132, 81.8%). Three false identifications were made, none with clinical significance. For Gram-positive cocci in pairs or chains, more correct identifications were made from bottles analysed immediately compared to transported bottles (67% vs 44%, p=0.016), and longer transport time was associated with slightly lower probability of correct identification (OR 0.984 per additional hour, p=0.040). Transportation was not associated with a difference for other organism types. This technique is a vastly more cost-effective alternative to molecular techniques for rapid identification of bacteraemia isolates, and performance is minimally affected by inter-laboratory transport of bottles at ambient temperature.

Molecular mouse gram-negative resistance cartridges are a valid option for rapid antibiotic resistance detection in blood culture bottles

Molecular mouse gram-negative resistance cartridges are a valid option for rapid antibiotic resistance detection in blood culture bottles

Comparison of Rapid Antibiotic Susceptibility Test Method Directly from Blood Culture Bottle with Standard Disc Diffusion Method

Aim: Early determination of antimicrobial susceptibility of sepsis pathogens is important. In this study, we aimed to compare the standard disc diffusion method with the rapid antimicrobial susceptibility testing (RAST) method performed directly from blood culture bottles. Material and Methods: Bacteria isolated from samples that gave a positive signal on the blood culture device between April 2019 and September 2019 were included in the study, and antimicrobial susceptibilities were determined by the standard disc diffusion method and the RAST method. Categorical agreement, small error, large error, very large error, and area of technical uncertainty ratios were recorded. Results: A total of 103 bacteria including 19 S. aureus, 10 Enterococcus spp. and 24 E. coli, 24 K. pneumoniae, 13 P. aeruginosa, and 13 A. baumannii were included in the study. When the RAST method was compared with the standard disc diffusion method, 100% agreement was found between the methods against imipenem, meropenem, gentamicin, and trimethoprim-sulfamethoxazole in E. coli isolates at all hours evaluated, and against meropenem in K. pneumoniae isolates at the 6th and 8th hour. For S. aureus and P. aeruginosa isolates, very major errors were found in the RAST results. For A. baumannii isolates, 100% agreement between methods was observed for many antibiotics. Conclusion: It was concluded that the RAST method is a simple and inexpensive test for life-threatening infections such as sepsis. It was also felt that similar studies should be carried out with a large number of isolates, as compliance rates vary depending on the bacteria tested.

Direct Species Identification in Positive Blood Culture Bottles From Patients With Hematologic Malignancies.

Background In patients with hematologic malignancies, faster species identification is particularly important in the management of bloodstream infection because of their immunocompromised and neutropenic status. In the present study, we analyzed direct species identification in patients with hematologic malignancies, and the factors that might influence the results of species identification. Methods We performed direct species identification using a Sepsityper® kit (Bruker Corporation, Billerica, Massachusetts, United States) and compared the results with a conventional method in patients with hematologic malignancies. Forty-five positive blood culture bottles containing single microorganisms from 37 patients were analyzed by matrix-assisted laser desorption/ionization-time of flight mass spectrometry (MALDI-TOF MS). And patients' clinical data were compared between the groups with spectral scores at acceptable and unacceptable levels. Results Direct species identification correctly identified 42 of 45 isolates and three were misidentified.While 35 of 45 isolates showed a spectral score ≥1.7 (acceptable identification), 10 isolates had a spectral score <1.7 (unacceptable identification) including three misidentified isolates. The group with a spectral score ≥1.7 had significantly lower white blood cell (p<0.01), neutrophil (p<0.01), and platelet (p<0.01) counts in addition to more frequent central venous (CV) line insertion (p=0.01). Multivariate analysis revealed that pathogen type (gram-positive or negative) and CV line insertion were associated with spectral scores. Conclusion Direct species identification using the Sepsityper kit is an upcoming approach for blood culture bottles, which were flagged as positive even in patients with hematologic malignancies when the spectral score was ≥ 1.7. Our study also indicates that direct identification is more accurate in patients with CV lines, and may be less accurate when gram-positive bacteria are detected.

Time to Positivity in Blood Culture Bottles Inoculated with Sonication Fluid from Fracture-Related Infections.

The timely and accurate identification of causative agents is crucial for effectively managing fracture-related infections (FRIs). Among various diagnostic methods, the "time to positivity" (TTP) of cultures has emerged as a valuable predictive factor in infectious diseases. While sonication of implants and inoculation of blood culture bottles with sonication fluid have enhanced sensitivity, data on the TTP of this microbiological technique remain limited. Therefore, patients with ICM criteria for confirmed FRI treated at our institution between March 2019 and March 2023 were retrospectively identified and their microbiological records were analyzed. The primary outcome parameter was TTP for different microorganism species cultured in a liquid culture collected from patients with confirmed FRI. A total of 155 sonication fluid samples from 126 patients (average age 57.0 ± 17.4 years, 68.3% males) was analyzed. Positive bacterial detection was observed in 78.7% (122/155) of the liquid culture pairs infused with sonication fluid. Staphylococcus aureus was the most prevalent organism (42.6%). Streptococcus species exhibited the fastest TTP (median 11.9 h), followed by Staphylococcus aureus (median 12.1 h) and Gram-negative bacteria (median 12.5 h), all of which had a 100% detection rate within 48 h after inoculation. Since all Gram-negative pathogens yielded positive culture results within 24 h, it could be discussed if empirical antibiotic therapy could be de-escalated early and limited towards the Gram-positive germ spectrum if no Gram-negative pathogens are detected up to this time point in the context of antibiotic stewardship.

Multicenter Study of the Effectiveness of Antifungal Stewardship Team Intervention for Candidemia in Japan in 2008-2021.

Candidemia, linked to high mortality rates, requires prompt antifungal therapy for better outcomes. Treatment is structured as an action bundle, which is beneficial when followed closely. However, the Japanese action bundle lacks detailed guidance on severe complications like endocarditis or ocular issues. To address this, we adjusted the action bundle and assessed outcomes with and without AFT intervention. We strengthened protocols for blood cultures and organ assessments, and the AFT contacted the primary physician when yeast-like fungi were detected in the patient's blood culture bottles. Analyzing 204 candidemia cases from 2008-2021, we observed increased adherence and reduced mortality post-AFT intervention. Ophthalmology consultations rose significantly, but many patients had only one visit, suggesting inadequate follow-up. If endophthalmitis is diagnosed, a change in the treatment approach may be necessary. There is a possibility that abnormal ocular findings will be detected during subsequent visits, which highlights the need for improvement in ophthalmology follow-up rates as a future challenge for our AFT activities.

Evaluation of three protocols for direct susceptibility testing for Gram-negative rods from flagged positive blood culture bottles.

Bloodstream infections are associated with high mortality that can be reduced by targeted antibiotic therapy in the early stages of infection. Direct antibiotic susceptibility testing (AST) from flagged positive blood cultures may facilitate the administration of early effective antimicrobials much before the routine AST. Clinical and Laboratory Standards Institute-recommended direct AST can be performed with a limited number of antibiotic disks only. On the other hand, using an automated system for direct AST will not only allow effective laboratory workflow with reduced turnaround time but also provide the minimum inhibitory concentration values of tested antibiotics. However, using expensive automated systems for direct AST may not be feasible for resource-limited laboratories. Therefore, in this study, we aimed to evaluate the CLSI-recommended method and two other direct AST protocols (one with an automated system and the other with disk diffusion) for Gram-negative rods from flagged positive blood cultures.

Comparative transcriptome analysis reveals the importance of phenylpropanoid biosynthesis for the induced resistance of 84K poplar to anthracnose

BackgroundPoplar anthracnose, which is one of the most important tree diseases, is primarily caused by Colletotrichum gloeosporioides, which has been detected in poplar plantations in China and is responsible for serious economic losses. The characteristics of 84K poplar that have made it one of the typical woody model plants used for investigating stress resistance include its rapid growth, simple reproduction, and adaptability.ResultsIn this study, we found that the resistance of 84K poplar to anthracnose varied considerably depending on how the samples were inoculated of the two seedlings in each tissue culture bottle, one (84K-Cg) was inoculated for 6 days, whereas the 84K-DCg samples were another seedling inoculated at the 6th day and incubated for another 6 days under the same conditions. It was showed that the average anthracnose spot diameter on 84K-Cg and 84K-DCg leaves was 1.23 ± 0.0577 cm and 0.67 ± 0.1154 cm, respectively. Based on the transcriptome sequencing analysis, it was indicated that the upregulated phenylpropanoid biosynthesis-related genes in 84K poplar infected with C. gloeosporioides, including genes encoding PAL, C4H, 4CL, HCT, CCR, COMT, F5H, and CAD, are also involved in other KEGG pathways (i.e., flavonoid biosynthesis and phenylalanine metabolism). The expression levels of these genes were lowest in 84K-Cg and highest in 84K-DCg.ConclusionsIt was found that PAL-related genes may be crucial for the induced resistance of 84K poplar to anthracnose, which enriched in the phenylpropanoid biosynthesis. These results will provide the basis for future research conducted to verify the contribution of phenylpropanoid biosynthesis to induced resistance and explore plant immune resistance-related signals that may regulate plant defense capabilities, which may provide valuable insights relevant to the development of effective and environmentally friendly methods for controlling poplar anthracnose.

Rapid identification,fluconazole and micafungin susceptibility testing of Candida species from blood culture by a short incubation method

This study aimed to develop and validate a rapid method for identification by MALDI-TOF system and determination of the susceptibility to Fluconazole and Micafungin by broth microdilution among Candidaspecies causing bloodstream infections. Subcultures from blood culture bottles were incubated for 5 hours (+/- 1h) and used to perform the tests, so that the turnaround time of rapid identification and susceptibility profile was about 5 and 24 hours, respectively. The rapid identification showed agreement of 92.05 %. Regarding the rapid broth microdilution for Fluconazole and Micafungin, the agreement was 97.06 % (p<0.001) and 100 % (p<0.001), and the Kappa coefficient was 0.91 (p<0.001) and 1.0 (p<0.001), respectively. To conclude, both rapid methods showed to be reproducible, inexpensive, easy to perform and time-saving. Thus, these methodologies could be useful to guide and adjust empirical antifungal therapy.

Clinical utility of multiplex PCR in the detection of pathogens from sterile body fluids.

The identification of pathogens in normally sterile body fluid (NSBF) is performed using routine culture, the current gold standard. Limitations of this method include sensitivity and increased turnaround times which could potentially delay vital patient care, especially antimicrobial therapy. Adaptations of NSBF in blood culture bottles prompted us to consider the utility of additional methods to bridge the gap in diagnostic challenges for these life-threatening infections. Multiplex molecular panels have been manufactured for use with multiple specimen types including blood, cerebral spinal fluid, stool, and respiratory. Therefore, the purpose of this study was to evaluate the off-label use of ePlex Blood Culture Identification Panels on positive body fluids grown in blood culture bottles for the detection of microorganisms for research purposes.