Colloidal Solution Research Articles

Research of CdS/L-cystein colloid solutions using the method of mathematical planning

In the work, the additive effect of the content of crystal-forming ions Сd2+ and S2- and the stabilizer L-Cys using the method of mathematical planning of the experiment on the process of formation of CdS/L-Cys nanoparticles in potentially oxidizing conditions (without deaeration of precursor solutions) and the optical properties of colloidal solutions were investigated. obtained under conditions of pH = 7 and temperature of 220C. By statistical processing of the results, equations were obtained and diagrams of concentration dependences of the wavelength of the optical absorption edge of colloidal solutions of CdS semiconductor nanoparticles in the Сd2+ – L-Cys – S2- system were constructed.

Nanoscale dielectric properties of TiO2 in SiO2 nanocomposite deposited by hybrid PECVD method

In this paper, nanocomposites (TiO2 in SiO2) are produced by an advanced hybrid aerosol-PECVD method based on direct liquid injection of a non-commercial colloidal solution in an O2 / hexamethyldisiloxane (HMDSO) low-pressure plasma. Dielectric properties are investigated at nanoscale using techniques derived from Atomic Force Microcopy in terms of relative dielectric permittivity, charge injection and transport. Results show that a concentration in TiO2 up to 14% by volume makes it possible to increase the relative dielectric permittivity up to 4.8 while maintaining the insulating properties of the silica matrix. For a TiO2 concentration in the range 15%–37% by volume, the relative dielectric permittivity increases (up to 11 for 37% TiO2 by volume) and only few agglomerated nanoparticles lowering the insulating properties are observed. For TiO2 concentration above 40% by volume, the relative dielectric permittivity still increases but the quantity of agglomerated nanoparticles is very high, which greatly increases the charge transport dynamic and degrades the insulating properties. Finally, 37% of TiO2 by volume in the SiO2 matrix appears to be the best compromise, between high dielectric permittivity and low leakage current for the MIM applications aimed.

Merging of Bi-Modality of Ultrafast Laser Processing: Heating of Si/Au Nanocomposite Solutions with Controlled Chemical Content.

Ultrafast laser processing possesses unique outlooks for the synthesis of novel nanoarchitectures and their further applications in the field of life science. It allows not only the formation of multi-element nanostructures with tuneable performance but also provides various non-invasive laser-stimulated modalities. In this work, we employed ultrafast laser processing for the manufacturing of silicon-gold nanocomposites (Si/Au NCs) with the Au mass fraction variable from 15% (0.5 min ablation time) to 79% (10 min) which increased their plasmonic efficiency by six times and narrowed the bandgap from 1.55 eV to 1.23 eV. These nanostructures demonstrated a considerable fs laser-stimulated hyperthermia with a Au-dependent heating efficiency (~10-20 °C). The prepared surfactant-free colloidal solutions showed good chemical stability with a decrease (i) of zeta (ξ) potential (from -46 mV to -30 mV) and (ii) of the hydrodynamic size of the nanoparticles (from 104 nm to 52 nm) due to the increase in the laser ablation time from 0.5 min to 10 min. The electrical conductivity of NCs revealed a minimum value (~1.53 µS/cm) at 2 min ablation time while their increasing concentration was saturated (~1012 NPs/mL) at 7 min ablation duration. The formed NCs demonstrated a polycrystalline Au nature regardless of the laser ablation time accompanied with the coexistence of oxidized Au and oxidized Si as well as gold silicide phases at a shorter laser ablation time (<1 min) and the formation of a pristine Au at a longer irradiation. Our findings demonstrate the merged employment of ultrafast laser processing for the design of multi-element NCs with tuneable properties reveal efficient composition-sensitive photo-thermal therapy modality.

Handling Nanoparticle Content in Nanocomposite Thin Films Deposited by Misty Plasma Processes through Controlled Flash Boiling Atomization.

Misty plasma processes based on colloidal solutions sprayed into low-pressure plasmas have recently shown great potential for multifunctional thin film deposition. In such processes, nanoparticle accumulation in ring-shaped structures remains the main obstacle to the synthesis of high-quality coatings containing abundant, small-scale, and evenly dispersed nanoparticles. These local buildups appear after a colloidal droplet evaporates from a substrate. Accordingly, controlling the droplets' size in the spray is of key importance to ensure a uniform nanoparticle content in the plasma-deposited nanocomposite film. In this work, it is shown that the use of more volatile solvents produces finer droplets on the substrate, thereby improving nanoparticle dispersion in the matrix. A one-dimensional evaporation model is further developed and used to show that, contrary to what one might expect, this result cannot be attributed to faster evaporation during droplet transport in the low-pressure plasma. Instead, a so-called "flash" boiling atomization mechanism is discussed to support the experimental findings.

In vitro effect of hydroxyethyl starch on COVID-19 patients–associated hypofibrinolytic state

BackgroundDespite systematic thromboprophylaxis, 30% of the COVID-19 patients in intensive care units develop thrombosis. This occurrence is associated with a hypofibrinolytic state measured by thromboelastometry when adding tissue plasminogen activator (tPA) to citrated whole blood for a further run for EXTEM (ROTEM). ObjectivesBecause hydroxyethyl starches (HESs) affect fibrin polymerization, we have assessed its potential effect on in vitro tPA-induced fibrinolysis. MethodsFifteen successive COVID-19 patients from the local intensive care units were selected for tPA resistance occurrence. HES was added to whole blood samples with proportion similar to the pharmacologic recommendations. Samples were run for EXTEM on a ROTEM delta device after further addition of tPA. Paired controls were whole blood samples with the same volume of saline added. To assess the impact of HES on coagulation, thrombin generation was measured in 10 COVID-19 patients in the presence of either HES or saline; then, the clots obtained were used to generate electron microscope images. ResultsClot firmness at 5 minutes and the lysis index at 30 minutes were decreased in presence of HES compared with saline (Wilcoxon test, P < .01 for HES vs saline and HES vs untreated). However, no statistically significant difference was observed for all thrombin generation assay parameters studied (endogenous thrombin potential, peak thrombin, and time to peak). With HES, fibrin fibers of either COVID-19 patients or control subjects were thicker than those of saline-treated samples. ConclusionThese results highlight that HES increased apparent in vitro tPA-induced fibrinolysis in case of severe COVID-19 disease. Use of this plasma volume expander may translate as a potential help against COVID-19–induced thrombosis occurrence.

Molecularly Targeted Lanthanide Nanoparticles for Cancer Theranostic Applications

Injectable colloidal solutions of lanthanide oxides (nanoparticles between 10 and 100 nm in size) have demonstrated high biocompatibility and no toxicity when the nanoparticulate units are functionalized with specific biomolecules that molecularly target various proteins in the tumor microenvironment. Among the proteins successfully targeted by functionalized lanthanide nanoparticles are folic receptors, fibroblast activation protein (FAP), gastrin-releasing peptide receptor (GRP-R), prostate-specific membrane antigen (PSMA), and integrins associated with tumor neovasculature. Lutetium, samarium, europium, holmium, and terbium, either as lanthanide oxide nanoparticles or as nanoparticles doped with lanthanide ions, have demonstrated their theranostic potential through their ability to generate molecular images by magnetic resonance, nuclear, optical, or computed tomography imaging. Likewise, photodynamic therapy, targeted radiotherapy (neutron-activated nanoparticles), drug delivery guidance, and image-guided tumor therapy are some examples of their potential therapeutic applications. This review provides an overview of cancer theranostics based on lanthanide nanoparticles coated with specific peptides, ligands, and proteins targeting the tumor microenvironment.

Photocatalytically active Ag-doped TiO2 coatings developed by plasma electrolytic oxidation in the presence of colloidal Ag nanoparticles

The plasma electrolytic oxidation process of Ti foil in the presence of a colloidal solution of Ag nanoparticles was used for the synthesis of exceptionally photocatalytically active Ag-doped TiO2 coatings. UV–Vis absorption spectroscopy was applied to follow the changes in the surface plasmon resonance band of the Ag nanoparticles as a function of the Ag:PO43− ratio in a phosphate-based electrolyte solution. Transmission electron microscopy revealed the size of the Ag nanoparticles in the range of 3–12 nm. The XRD patterns of the Ag-doped TiO2 coatings confirmed the crystalline anatase TiO2 phase regardless of the dopant concentration and without metallic Ag or crystalline Ag oxide forms. The typical porous morphology of the Ag–TiO2 coatings was observed by scanning electron microscopy. A significantly improved photocatalytic activity of the Ag–TiO2 coatings in the degradation process of the insecticide lindane (gamma isomer of benzene hexachloride) and test molecule methyl orange compared to pure TiO2 was determined using the GC technique. The degradation efficiency of Ag-doped TiO2 coatings is higher for lindane than for methyl orange.

Optimizing Cardioplegic Solutions: A Focus on Pharmaco-Cold Strategies

This study investigates the impact of crystalloid cardioplegic solutions (CCS) on electrophysiological mechanisms and the contractile system during the diastolic phase. Extracellular solutions, categorized by ion concentration, demonstrate efficacy in inducing cardiac arrest through moderately elevated potassium or potassium-magnesium combinations, aligning with normal or slightly reduced sodium and calcium levels. Notably, the ease of equilibration with myocardial tissue enhances the protective effect, correlating with infusion volume and duration of action. However, drawbacks such as low buffering capacity and the need for reinfusion after 15-20 minutes are identified. This research sheds light on the dynamic relationship between solution composition, duration of action, and protective efficacy, providing valuable insights for refining cardioplegic protocols in cardiac surgeries. Highlights: Intracellular vs. Extracellular Impact: Explore ion concentration's influence on crystalloid cardioplegic solutions, emphasizing the choice between intracellular and extracellular formulations. Equilibration Dynamics: Investigate the direct correlation between infusion volume, duration of action, and the protective effect, emphasizing equilibration with myocardial tissue. Refining Cardioplegic Protocols: Identify limitations like low buffering capacity, necessitating reinfusion, and offer insights into strategies for enhancing cardioplegic protocols in cardiac surgeries. Keywords: Cardioplegia, Intracellular Solutions, Calcium paradox, Protective Efficacy, Cellular Metabolism

Initial Experience of Anesthetic Management in Combined Liver-Kidney Transplantation: A Case Report

In this case report, we present a successful combined liver-kidney transplantation (CLKT) performed on a 41-year-old female with end-stage liver and renal disease. The patient, previously undergoing liver transplantation and regular hemodialysis, underwent CLKT with a focus on specific anesthesia management strategies. Key aspects included the use of desflurane for anesthesia, balanced crystalloid solutions for fluid management, and careful monitoring of hemodynamics without intraoperative renal replacement therapy. Despite substantial intraoperative fluid and blood product administration, careful management ensured stable vital signs and acid-base balance. The patient's postoperative recovery was notable for significant improvements in liver and renal functions, demonstrated by decreased creatinine and bilirubin levels, and improved estimated glomerular filtration rate, without the need for postoperative dialysis. This case underscores the effectiveness of CLKT in patients with concurrent liver and renal dysfunction, highlighting the importance of tailored anesthesia and fluid management strategies. The report contributes to the limited literature on anesthesia in CLKT, providing insights for better outcomes in such complex surgical procedures.

Stable nanometer-size beta-cyclodextrin – CeO2-x colloidal nanoparticles with high free radical scavenging activity

Cyclodextrin (CD) molecules are well-known for their ability to form inclusion complexes with hydrophobic molecules, including small drug molecules and lipophilic antioxidants. The combination of nanoparticles (NPs) with antioxidant properties (so-called nanozymes) and hydrophobic antioxidant molecules using CD@NP complexes can increase sufficiently the antioxidant efficiency of both components due to synergistic effect. Here we propose the new method of obtaining β-CD@CeO2-x complexes with addition of β-CD on the stage of syntheses of NPs. As a result, highly stable colloidal solutions of nanometer-size (2–3 nm) β-CD@CeO2-x nanoparticles were obtained. The stabilization effect of β-CD molecules was shown. Obtained β-CD@CeO2-x complexes reveal high antiradical activity in the number of experiments (including •OH and O2– scavenging) related to Ce3+/Ce4+ redox switching in nanoceria. The aggregation behavior of β-CD@CeO2-x complexes in various biological media was studied and the ways to improve their stability were proposed.

Hydrogen-bonded organic frameworks in solution enables continuous and high-crystalline membranes

Hydrogen-Bonded organic frameworks (HOFs) are a type of emerging porous materials. At present, little research has been conducted on their solution state. This work demonstrates that HOFs fragment into small particles while maintaining their original assemblies upon dispersing in solvents, as confirmed by Cryo-electron microscopy coupled with 3D electron diffraction technology. 1D and 2D-Nuclear Magnetic Resonance (NMR) and zeta potential analyses indicate the HOF-based colloid solution and the isolated molecular solution have significant differences in intermolecular interactions and aggregation behavior. Such unique solution processibility allows for fabricating diverse continuous HOF membranes with high crystallinity and porosity through solution-casting approach on various substrates. Among them, HOF-BTB@AAO membranes show high C3H6 permeance (1.979 × 10−7 mol·s−1·m−2·Pa−1) and excellent separation performance toward C3H6 and C3H8 (SF = 14). This continuous membrane presents a green, low-cost, and efficient separation technology with potential applications in petroleum cracking and purification.

Early high-volume resuscitation with crystalloid solution combined with albumin improves survival of critically ill patients: A retrospective analysis from MIMIC-IV database

BackgroundVolume resuscitation is often required in critically ill patients. However, we have no clear consensus on the choice between crystalloid solution and colloidal solution. This study aimed to explore the effect of albumin administration in massive fluid resuscitation. MethodsThis was a retrospective cohort study based on the Medical Information Mart for Intensive Care IV (MIMIC-IV) database (2008 and 2019). The prognosis of patients receiving albumin in combination with crystalloids and those receiving crystalloids alone was compared to assess the benefits of albumin in fluid resuscitation. Results4426 patients received crystalloids alone (crystalloids group), 692 patients received albumin in combination with crystalloids within the first 24 h of initiation of crystalloids (early albumin combination group), and 382 patients received albumin after the first 24 h (late albumin combination group). Patients in early albumin combination group were more severe than those in Crystalloids group. Nevertheless, we found no statistically significant difference in mortality between the two groups. Multivariate logistic regression analysis using the propensity-score matched cohort showed that the 28-day and 60-day mortality in the early albumin combination group were lower than those in the crystalloids group (odds ratio: 0.64 [95% CI 0.50–0.82; P < 0.001] and 0.71 [95% CI 0.56–0.90; P = 0.004], respectively. Patients in early albumin combination group lived, on average, 1.16 days (95% CI 0.33–2.00; P < 0.01) and 3.3 days (95% CI 1.15–5.44; P < 0.01) longer than the crystalloids group during 28-day follow-up and 60-day follow-up. ConclusionAdministration of albumin within 24 h after the initiation of crystalloids was associated with a lower mortality and a longer restricted mean survival time during 28-day follow-up and 60-day follow-up compared with crystalloid infusion alone. However, administration of albumin 24 h after the initiation of crystalloids was not associated with better prognosis compared to crystalloid infusion alone.

How do balanced crystalloid solutions compare with 0.9% saline for treating acute diarrhea and severe dehydration in children?

How do balanced crystalloid solutions compare with 0.9% saline for treating acute diarrhea and severe dehydration in children?

Green synthesis of anti-cancer drug-loaded gold nanoparticles for low-intensity pulsed ultrasound targeted drug release.

In the present work, we have designed a one-pot green protocol in which anti-cancer drugs (curcumin and doxorubicin) can be directly loaded on the surface of gold nanoparticles during their formation. We have further demonstrated that low-intensity pulsed ultrasound (LIPUS) can be used to effectively induce the release of anti-cancer drugs from the surface of gold nanoparticles in an ex vivo tissue model. With this protocol, gold nanoparticles can be easily loaded with different types of anticancer drugs, irrespective of their affinity towards water, and even hydrophobic molecules, like curcumin, can be attached onto the gold nanoparticles in an aqueous medium. The method is very simple and straightforward and does not require stirring or mechanical shaking. The drug molecules interact with the gold seeds formed during the reduction and growth process and modulate the final morphology into a spherical shape. A black-colored colloidal solution of gold nanowire networks is formed in the absence of these anti-cancer drug molecules in the reaction mixture. We used hyperspectral-enhanced dark field microscopy to examine the uptake of gold nanoparticles by breast cancer cells. Upon exposure to LIPUS, the release of the anti-cancer drug from the particle surface can be quantified by fluorescence measurements. This release of drug molecules along with trisodium citrate from the surface of gold nanoparticles by ultrasound resulted in their destabilization and subsequent aggregation, which could be visually observed through the change in the color of colloidal sol. Cancer cell viability was studied by MTT assay to examine the efficacy of this nanoparticle-based drug delivery system. Ultraviolet-visible spectroscopy, dynamic light scattering (DLS), and transmission electron microscope (TEM) analysis were used to characterize the nanoparticles and quantify anti-cancer drug release.

Viscosity Anomalies of Magnetic Fluid Stabilized by a Double Layer of Surfactant in Water

Purpose to study the temperature dependence of the viscosity of a water-based magnetic fluid.Method. Consists of measuring the dynamic viscosity of a magnetic fluid based on cobalt ferrite particles stabilized in water by a double layer of surfactant. Lauric acid (first layer) and a mixture of lauric acid and sodium dodecyl sulfate (second layer) were used as a stabilizer. Measurements were performed using a Brookfield DV-II+Pro rotational viscometer equipped with a coaxial cylinder system. The measuring system of the viscometer was thermostated using a KRIO-VT-12-1 thermostat.Results. The temperature dependences of dynamic viscosity were measured for three samples of magnetic fluid based on cobalt ferrite particles of various concentrations in the temperature range 0–90C°. The obtained temperature dependences of viscosity are radically different from the temperature dependences both predicted by known theories and experimentally observed for kerosene-based magnetic fluids. According to well-known theoretical models, the ratio of the viscosity of the magnetic fluid to the viscosity of the base medium is a certain universal function of particle concentration. Different models offer different types of this feature. But it clearly follows from them that the viscosity ratio should not depend on temperature. For magnetic fluids based on kerosene, it has been experimentally established that its relative viscosity decreases with increasing temperature. However, according to the results obtained, the relative viscosity of a water-based magnetic fluid does not decrease with increasing temperature, but increases significantly. That is, the viscosity of a water-based magnetic fluid decreases more slowly with increasing temperature than the viscosity of water.Conclusion. The observed dependencies completely contradict the known patterns, both theoretical and experimentally established for kerosene-based magnetic fluids. The results obtained may be useful for the further development of the theory of aqueous colloidal solutions with particle stabilization by a double layer of surfactants.

Polymer-Doped SnO2 as an Electron Transport Layer for Highly Efficient and Stable Perovskite Solar Cells.

To produce highly efficient and repeatable perovskite solar cells (PSCs), comprehending interfacial loss and developing approaches to ameliorate interfacial features is essential. Nonradiative recombination at the SnO2-perovskite interface in SnO2-based perovskite solar cells (PSCs) leads to significant potential loss and variability in device performance. To improve the quality of the SnO2 electron transport layer, a novel polymer-doped SnO2 matrix, specifically using polyacrylic acid, was developed. This matrix is formed by spin-coating a SnO2 colloidal solution that includes polymers. The polymer aids in dispersing nanoparticles within the substrate and is evenly distributed in the SnO2 solution. As a result of the polymer addition, the density and wetting properties of the SnO2 layer substantially improved. Subsequently, perovskite-based photovoltaic devices comprising SnO2 and Spiro-OMeTAD layers and using (FAPbI3)0.97(MAPbBr3)0.03 perovskite are constructed. These optimized devices exhibited an increased efficiency of 17.2% when compared to the 15.7% power conversion efficiency of the control device. The incorporation of polymers in the electron transport layer potentially enables even better performance in planar perovskite solar cells.

Development of silver nanocubes created by pulsed laser ablation in liquid

This paper describes a simple approach for creating silver (Ag) nanocubes using pulsed laser ablation in a liquid medium. The development of nanocubical formations of Ag obtained by laser ablation using Nd: YAG laser was conducted for 5, 10, 15, and 20[Formula: see text]min. The surface morphological analysis was performed using field-emission scanning electron microscopy (FESEM) to show the formation of silver nanocubes with edge lengths ranging from 150[Formula: see text]nm to 250[Formula: see text]nm. The UV-visible spectroscopy demonstrates that the concentration of Ag nanostructures, evidenced by the characteristic localized surface plasmon resonance band near 400[Formula: see text]nm in the colloidal solution containing Ag nanoparticles, increased with the increasing laser ablation duration from 5[Formula: see text]min to 20[Formula: see text]min. The growth mechanism for Ag nanocubes can be easily understood with the change in laser ablation time from 5 to 10, 15, and then 20[Formula: see text]min. The Ag sheets with no specific shape start to develop after 5 min of laser ablation, and after 10[Formula: see text]min, larger particles form. Then, after 15[Formula: see text]min, a small number of cube-like nanostructures with rough and uneven edges was obtained. At the end of 20[Formula: see text]min, a complete cubic formed with fine and distinct edges and a very large amount of nanocubes. The elemental silver signal was present in Ag nanocubes, as revealed by the energy-dispersive X-ray spectroscopy (EDS) spectra. The produced Ag nanocubes may be used to construct two-dimensional nanocomposites with practical applications in the electrical, optoelectronic, electrochemical, and biological areas.

All-Solution-Processed High-Performance MoS2 Thin-Film Transistors with a Quasi-2D Perovskite Oxide Dielectric.

Assembling solution-processed van der Waals (vdW) materials into thin films holds great promise for constructing large-scale, high-performance thin-film electronics, especially at low temperatures. While transition metal dichalcogenide thin films assembled in solution have shown potential as channel materials, fully solution-processed vdW electronics have not been achieved due to the absence of suitable dielectric materials and high-temperature processing. In this work, we report on all-solution-processedvdW thin-film transistors (TFTs) comprising molybdenum disulfides (MoS2) as the channel and Dion-Jacobson-phase perovskite oxides as the high-permittivity dielectric. The constituent layers are prepared as colloidal solutions through electrochemical exfoliation of bulk crystals, followed by sequential assembly into a semiconductor/dielectric heterostructure for TFT construction. Notably, all fabrication processes are carried out at temperatures below 250 °C. The fabricated MoS2 TFTs exhibit excellent device characteristics, including high mobility (>10 cm2 V-1 s-1) and an on/off ratio exceeding 106. Additionally, the use of a high-k dielectric allows for operation at low voltage (∼5 V) and leakage current (∼10-11 A), enabling low power consumption. Our demonstration of the low-temperature fabrication of high-performance TFTs presents a cost-effective and scalable approach for heterointegrated thin-film electronics.

Intensifying the particle deposition from a colloidal solution for the purpose of liquid purification: Comparison of deposition mechanisms and rates

The deposition of particles from a layer of colloidal solution (water and microparticles) has been experimentally studied in the presence of laser heating. Instantaneous temperature and velocity fields are measured using a thermal imager and the Particle Image Velocimetry and the Particle Tracking Velocimetry methods. The unstable behavior of the velocity field in the presence of heating and a free liquid surface are assumed to be determined by the Bond number (Bo). Of interest is also an additional mechanism for the instability formation when the Peclet number (Pe) exceeds the critical value and when the ratio of characteristic velocities VT/Vavr > 1, where VT is the heat front velocity at the initial moment of laser heating, and Vavr is the average convection velocity. A new mechanism of particle deposition due to the use of local laser heating is proposed for the first time. The control over local heating and local deposition increases the particle deposition rate by 2–3 orders compared with that without convection. The particle deposition rate and the deposit area increase with increasing height of the liquid layer, reach maximum values at a critical height, and then decrease sharply with increasing height. The dependence for determining the area and mass of the deposit is proposed to take into account the deposition time, the height of the liquid layer and the rate of convection. The resulting particle deposition method and calculation method may be used in technologies related to the purification of liquid from solid impurities in small volumes, as well as in problems where deposition in a given direction is required to form an ordered nanocoating.

Development of injectable colloidal solution forming an in situ hydrogel for tumor ablation.

Ablation cancer therapy using percutaneous intra-tumoral injection of ethanol is a promising method for targeted and effective locoregional cancer therapy. Magnetic gelatin microsphere (MGM) colloidal ethanol solution is developed as a potential injectable tumor ablation agent. The MGM was fabricated by electrostatic interactions among gelatin, acrylic acid, and acrylic acid-coated iron oxide nanoparticles. The fabricated MGM was dispersed in ethanol solution to form injectable MGM colloidal ethanol solution. The MGM colloidal ethanol solution can be easily infused and undergo in situ gelation via solvent exchange from ethanol to water in an artificial tissue. Furthermore, the MGM colloidal ethanol solution allowed doxorubicin (Dox) chemo-agent loading and its sustained release upon the formation of a drug depot by in situ gelation in artificial tissues. Our in vitro study demonstrated that locally delivered ethanol and Dox with MGM colloidal ethanol solution promoted the anti-cancer therapeutic efficacy with a significantly suppressed cancer cell recovery rate. Overall, our developed injectable MGM colloidal ethanol solution that can be transformed to a hydrogel drug depot at the injection site holds clinical potential for a new class of chemo-ablation agents.