cryo-EM Sample Preparation Research Articles

TRPV3 expression and purification for structure determination by Cryo-EM.

The transient receptor potential vanilloid-superfamily member 3 (TRPV3) channel is implicated in a variety of physiological processes, including temperature sensing, nociception and itch, maintenance of the skin barrier, wound healing, hair growth, and embryonic development. TRPV3 is also associated with various skin diseases, including Olmsted syndrome, atopic dermatitis, and rosacea. Studies of TRPV3 are of fundamental importance for structural pharmacology aimed at the design of drugs targeting this channel and for understanding the molecular basis of temperature sensing. Here we describe a detailed protocol for expression and purification of chemically pure and stable TRPV3 protein that is suitable for structural and functional characterization of this channel, in particular for cryo-EM sample preparation and high-resolution 3D reconstruction.

Need for Speed: Examining Protein Behavior during CryoEM Grid Preparation at Different Timescales

SummaryA host of new technologies are under development to improve the quality and reproducibility of cryoelectron microscopy (cryoEM) grid preparation. Here we have systematically investigated the preparation of three macromolecular complexes using three different vitrification devices (Vitrobot, chameleon, and a time-resolved cryoEM device) on various timescales, including grids made within 6 ms (the fastest reported to date), to interrogate particle behavior at the air-water interface for different timepoints. Results demonstrate that different macromolecular complexes can respond to the thin-film environment formed during cryoEM sample preparation in highly variable ways, shedding light on why cryoEM sample preparation can be difficult to optimize. We demonstrate that reducing time between sample application and vitrification is just one tool to improve cryoEM grid quality, but that it is unlikely to be a generic “silver bullet” for improving the quality of every cryoEM sample preparation.

Amorphous nickel titanium alloy film: A new choice for cryo electron microscopy sample preparation

Cryo-electron microscopy (cryoEM) has become one of the most important approach for structural biology. However, barriers are still there for an increased successful rate, a better resolution and improved efficiency from sample preparation, data collection to image processing. CryoEM sample preparation is one of the bottlenecks with many efforts made recently, including the optimization of supporting substrate (e.g. ultra-thin carbon, graphene, pure gold, 2d crystal of streptavidin, and affinity modification), which was aimed to solve air-water interface problem, or reduce beam induced motion (BIM), or change particle distribution in the grid hole. Here, we report another effort of developing a new supporting substrate, the amorphous nickel-titanium alloy (ANTA) film, for cryoEM sample preparation as a layer of holey supporting film covering on TEM grid. Our investigations showed advantages of ANTA film in comparison with conventional carbon film, including much better electron conductivity and trace non-specific interaction with protein. These advantages yield less BIM and significantly improved particle distribution during cryoEM experiment of human apo-ferritn, thus resulting an improved reconstruction resolution from a reduced number of micrographs and particles. Unlike the pure gold film, the usage of the ANTA film is just same with the carbon film, compatible to conventional automatic cryoEM data collection procedure.

Need for Speed: Examining Protein Behaviour During CryoEM Grid Preparation at Different Timescales

A host of new technologies are under development to improve the quality and reproducibility of cryoEM grid preparation. Here we have systematically investigated the preparation of three macromolecular complexes using three different vitrification devices (Vitrobot™, chameleon and a time-resolved cryoEM device) on various timescales, including grids made within 6 ms, (the fastest reported to date), to interrogate particle behaviour at the air-water interface for different timepoints. Results demonstrate that different macromolecular complexes can respond to the thin film environment formed during cryoEM sample preparation in highly variable ways, shedding light on why cryoEM sample preparation can be difficult to optimise. We demonstrate that reducing time between sample application and vitrification is just one tool to improve cryoEM grid quality, but that it is unlikely to be a generic ‘silver bullet’ for improving the quality of every cryoEM sample preparation.

Cryo-EM sample preparation method for extremely low concentration liposomes

Liposomes are widely used as delivery systems in pharmaceutical, cosmetics and food industries, as well as a system for structural and functional study of membrane proteins. To accurately characterize liposomes, cryo-Electron Microscopy (cryo-EM) has been employed as it is the most precise and direct method to determine liposome lamellarity, size, shape and ultrastructure. However, its use is limited by the number of liposomes that can be trapped in the thin layer of ice that spans holes in the perforated carbon film on EM grids. We report a long-incubation method for increasing the density of liposomes in holes. By increasing the incubation time, high liposome density was achieved even with extremely dilute (in the nanomolar range) liposome solutions. This long-incubation method has been successfully employed to study the structure of an ion channel reconstituted into liposomes.

Preparation of filamentous proteins for electron microscopy visualization and reconstruction.

Cryo electron microscopy (cryo-EM) has become a mainstream tool for determining the structures of macromolecular complexes at the atomic resolution. It has many advantages over other techniques such as X-ray crystallography and nuclear magnetic resonance (NMR). However, it also entails several challenges, a major one being preparation of an ideal sample. Recent studies have identified that DNA sensors and inflammasomes often assemble into filamentous oligomers, which poses a unique set of challenges in preparing ideal samples for high-resolution reconstruction using cryo-EM. This chapter will discuss how to overcome several major issues in cryo-EM sample preparation including construct design, screening using negative stain (ns) EM, and tips on working with filamentous proteins.

Innovation in CryoEM Sample Preparation: Towards Commercialization of Spotiton

Innovation in CryoEM Sample Preparation: Towards Commercialization of Spotiton

Structure of an innexin gap junction channel and cryo-EM sample preparation.

Gap junction channels are essential for mediating intercellular communication in most multicellular organisms. Two gene families encode gap junction channels, innexin and connexin. Although the sequence similarity between these two families based on bioinformatics is not conclusively determined, the gap junction channels encoded by these two gene families are structurally and functionally analogous. We recently reported an atomic structure of an invertebrate innexin gap junction channel using single-particle cryo-electron microscopy. Our findings revealed that connexin and innexin families share several structural properties with regard to their monomeric and oligomeric structures, while simultaneously suggesting a diversity of gap junction channels in nature. This review summarizes cutting-edge progress toward determining an innexin gap junction channel structure, as well as essential tips for preparing cryo-electron microscopy samples for high-resolution structural analysis of an innexin gap junction channel.

Streptavidin Monolayer-Crystal Affinity Grids: A Step Toward Controlling What Happens During Cryo-EM Sample Preparation

Streptavidin Monolayer-Crystal Affinity Grids: A Step Toward Controlling What Happens During Cryo-EM Sample Preparation

Self-Blotting Nanowire Grids for Cryo-EM Sample Preparation

AbstractAlmost every aspect of cryo electron microscopy (CryoEM) has been automated over the last few decades. One of the challenges that remains to be addressed is the robust and reliable preparation of vitrified specimens of suitable ice thickness. The development of a new self-blotting nanowire (Zhang et al., 2013) grid in conjunction with a piezo electric dispensing robot called Spotiton (Jain et al., 2012) enables spreading a sample to a thin film without the use of externally applied filter paper. This new approach has the advantage of using small amounts of protein material, resulting in large areas of ice of a well- defined thickness containing evenly distributed particles (Razinkov et al., 2016).

Design of a molecular support for cryo-EM structure determination

Despite the recent rapid progress in cryo-electron microscopy (cryo-EM), there still exist ample opportunities for improvement in sample preparation. Macromolecular complexes may disassociate or adopt nonrandom orientations against the extended air-water interface that exists for a short time before the sample is frozen. We designed a hollow support structure using 3D DNA origami to protect complexes from the detrimental effects of cryo-EM sample preparation. For a first proof-of-principle, we concentrated on the transcription factor p53, which binds to specific DNA sequences on double-stranded DNA. The support structures spontaneously form monolayers of preoriented particles in a thin film of water, and offer advantages in particle picking and sorting. By controlling the position of the binding sequence on a single helix that spans the hollow support structure, we also sought to control the orientation of individual p53 complexes. Although the latter did not yet yield the desired results, the support structures did provide partial information about the relative orientations of individual p53 complexes. We used this information to calculate a tomographic 3D reconstruction, and refined this structure to a final resolution of ∼15 Å. This structure settles an ongoing debate about the symmetry of the p53 tetramer bound to DNA.

SNARE and regulatory proteins induce local membrane protrusions to prime docked vesicles for fast calcium‐triggered fusion

Synaptic vesicles fuse with the plasma membrane in response to Ca(2+) influx, thereby releasing neurotransmitters into the synaptic cleft. The protein machinery that mediates this process, consisting of soluble N-ethylmaleimide-sensitive factor attachment protein receptors (SNAREs) and regulatory proteins, is well known, but the mechanisms by which these proteins prime synaptic membranes for fusion are debated. In this study, we applied large-scale, automated cryo-electron tomography to image an in vitro system that reconstitutes synaptic fusion. Our findings suggest that upon docking and priming of vesicles for fast Ca(2)(+)-triggered fusion, SNARE proteins act in concert with regulatory proteins to induce a local protrusion in the plasma membrane, directed towards the primed vesicle. The SNAREs and regulatory proteins thereby stabilize the membrane in a high-energy state from which the activation energy for fusion is profoundly reduced, allowing synchronous and instantaneous fusion upon release of the complexin clamp.

High-Resolution Single-Molecule Structure Revealed by Electron Microscopy and Individual Particle Electron Tomography.

The protein is naturally dynamic and heterogeneous in solution. Protein dynamics involves both equilibrium fluctuations that regulate biological function and other non-equilibrium effects of biological motors, which convert chemical energy to mechanical energy. However, a single, unique structure of protein determined from X-ray crystal and conventional single-particle electron microscopy is insufficient to encompass the dynamic nature of proteins in solution. Structure determination of dynamic and heterogeneous protein is essentially required the determination of each individual particle of protein. Recently, Drs. Gang Ren and Lei Zhan published the first single molecule three-dimensional (3D) EM images of individual proteins ever obtained with enough clarity to determine their structure, an IgG antibody (14 Å resolution) and a 17nm HDL (36 Å resolution). These results depended upon four innovations: i) improved cryo-electron microscopy (cryoEM) sample preparation and Electron microscopy (EM) operation conditions resulted in the successful imaging of a 17 nm HDL particle (120-200kDa) by cryo-electron tomography (cryoET); ii) developed an optimized NS (OpNS) protocol that eliminates the rouleau artifact that has plagued EM research for three decades. This OpNS protocol provides high-contrast single lipoprotein images with similar size (<5%) and shape (<5%) to that seen by cryoEM; iii) developed a high-resolution and high contrast sample preparation protocol, cryo-positive-staining (cryoPS) that allows direct visualization of the secondary structure of a small protein, such as the β-strands in CETP and the helical double belt of apoA-I in spherical HDL; iv) developed a robust tomography reconstruction method, Individual Particle Electron Tomography (IPET) that is a high-resolution, high throughput reconstruction method that, to the best of our knowledge, is the only method for determining an individual protein structure. Remarkably, IPET went against the conventional wisdom that a single protein can NOT be reconstructed by EM and this opens a door for the study of protein dynamics via a particle-by-particle structural comparison.