cryo-EM Grid Research Articles

Blotting-free and lossless cryo-electron microscopy grid preparation from nanoliter-sized protein samples and single-cell extracts.

We present a sample preparation method for cryo-electron microscopy (cryo-EM) that requires only 3-20nL of sample to prepare a cryo-EM grid, depending on the protocol used. The sample is applied and spread on the grid by a microcapillary. The procedure does not involve any blotting steps, and real-time monitoring allows the water film thickness to be assessed and decreased to an optimum value prior to vitrification. We demonstrate that the method is suitable for high-resolution cryo-EM and will enable alternative electron microscopy approaches, such as single-cell visual proteomics.

Antibody-Based Affinity Cryoelectron Microscopy at 2.6-Å Resolution

The affinity cryoelectron microscopy (cryo-EM) approach has been explored in recent years to simplify and/or improve the sample preparation for cryo-EM, which can bring previously challenging specimens such as those of low abundance and/or unpurified ones within reach of the cryo-EM technique. Despite the demonstrated successes for solving structures to low to intermediate resolutions, the lack of near-atomic structures using this approach has led to a common perception of affinity cryo-EM as a niche technique incapable of reaching high resolutions. Here, we report a ∼2.6-Å structure solved using the antibody-based affinity grid approach with low-concentration Tulane virus purified from a low-yield cell-culture system that has been challenging to standard cryo-EM grid preparation. Quantitative analyses of the structure indicate data and reconstruction quality comparable with the conventional grid preparation method using samples at high concentration.

Alignment algorithms and per-particle CTF correction for single particle cryo-electron tomography.

Single particle cryo-electron tomography (cryoSPT) extracts features from cryo-electron tomograms, followed by 3D classification, alignment and averaging to generate improved 3D density maps of such features. Robust methods to correct for the contrast transfer function (CTF) of the electron microscope are necessary for cryoSPT to reach its resolution potential. Many factors can make CTF correction for cryoSPT challenging, such as lack of eucentricity of the specimen stage, inherent low dose per image, specimen charging, beam-induced specimen motions, and defocus gradients resulting both from specimen tilting and from unpredictable ice thickness variations. Current CTF correction methods for cryoET make at least one of the following assumptions: that the defocus at the center of the image is the same across the images of a tiltseries, that the particles all lie at the same Z-height in the embedding ice, and/or that the specimen, the cryo-electron microscopy (cryoEM) grid and/or the carbon support are flat. These experimental conditions are not always met. We have developed a CTF correction algorithm for cryoSPT without making any of the aforementioned assumptions. We also introduce speed and accuracy improvements and a higher degree of automation to the subtomogram averaging algorithms available in EMAN2. Using motion-corrected images of isolated virus particles as a benchmark specimen, recorded with a DE20 direct detection camera, we show that our CTF correction and subtomogram alignment routines can yield subtomogram averages close to 4/5 Nyquist frequency of the detector under our experimental conditions.

Antibody-based affinity cryo-EM grid

The Affinity Grid technique combines sample purification and cryo-Electron Microscopy (cryo-EM) grid preparation into a single step. Several types of affinity surfaces, including functionalized lipids monolayers, streptavidin 2D crystals, and covalently functionalized carbon surfaces have been reported. More recently, we presented a new affinity cryo-EM approach, cryo-SPIEM, which applies the traditional Solid Phase Immune Electron Microscopy (SPIEM) technique to cryo-EM. This approach significantly simplifies the preparation of affinity grids and directly works with native macromolecular complexes without need of target modifications. With wide availability of high affinity and high specificity antibodies, the antibody-based affinity grid would enable cryo-EM studies of the native samples directly from cell cultures, targets of low abundance, and unstable or short-lived intermediate states.

Sample preparation of biological macromolecular assemblies for the determination of high-resolution structures by cryo-electron microscopy.

Single particle cryo-EM has recently developed into a powerful tool to determine the 3D structure of macromolecular complexes at near-atomic resolution, which allows structural biologists to build atomic models of proteins. All technical aspects of cryo-EM technology have been considerably improved over the last two decades, including electron microscopic hardware, image processing software and the ever growing speed of computers. This leads to a more widespread use of the technique, and it can be anticipated that further automation of electron microscopes and image processing tools will soon fully shift the focus away from the technological aspects, onto biological questions that can be answered. In single particle cryo-EM, no crystals of a macromolecule are required. In contrast to X-ray crystallography, this significantly facilitates structure determination by cryo-EM. Nevertheless, a relatively high level of biochemical control is still essential to obtain high-resolution structures by cryo-EM, and it can be anticipated that the success of the cryo-EM technology goes hand in hand with further developments of sample purification and preparation techniques. This will allow routine high-resolution structure determination of the many macromolecular complexes of the cell that until now represent evasive targets for X-ray crystallographers. Here we discuss the various biochemical tools that are currently available and the existing sample purification and preparation techniques for cryo-EM grid preparation that are needed to obtain high-resolution images for structure determination.

Gas-assisted annular microsprayer for sample preparation for time-resolved cryo-electron microscopy

Time-resolved cryo-electron microscopy (TRCEM) has emerged as a powerful technique for transient structural characterization of isolated biomacromolecular complexes in their native state within the time scale of seconds to milliseconds. For TRCEM sample preparation, a microfluidic device has been demonstrated to be a promising approach to facilitate TRCEM biological sample preparation. It is capable of achieving rapidly aqueous sample mixing, controlled reaction incubation, and sample deposition on electron microscopy (EM) grids for rapid freezing. One of the critical challenges is to transfer samples to cryo-EM grids from the microfluidic device. By using a microspraying method, the generated droplet size needs to be controlled to facilitate thin ice film formation on the grid surface for efficient data collection, whilst not being so thin that it dries out before freezing, i.e. an optimized mean droplet size needs to be achieved. In this work, we developed a novel monolithic three dimensional (3D) annular gas-assisted microfluidic sprayer using 3D MEMS (MicroElectroMechanical System) fabrication techniques. The microsprayer demonstrated dense and consistent microsprays with average droplet size between 6 and 9 μm, which fulfilled the droplet size requirement for TRCEM sample preparation. With droplet density of around 12–18 per grid window (window size 58 × 58 μm), and a data collectible thin ice region of >50% total wetted area, we collected ~800–1000 high quality CCD micrographs in a 6–8 h period of continuous effort. This level of output is comparable to what were routinely achieving using cryo-grids prepared by conventional blotting and manual data collection. In this case, weeks of data collection with the previous device has been shortened to a day or two. And hundreds of microliters of valuable sample consumption can be reduced to only a small fraction.

Preparation of single-layered enzyme 2D crystals for electron crystallography

Electron crystallography allows for a wide range of membrane proteins to be studied once conditions for two-dimensional (2D) crystallization have been identified. Two-dimensional crystallization is most frequently achieved via the dialysis approach, where the detergent-solubilized membrane protein is reconstituted into a lipid bilayer [1]. Vesicles, planar-tubular crystals, and sheets are the three most common 2D crystal morphologies. Vesicle and planar-tubular morphologies are observed for the largest percentage of 2D crystals of membrane proteins. Upon negative stain as well as electron cryo-microscopy (cryo-EM) grid preparation, each planar-tubular and vesicle 2D crystal will result in two ordered bilayers that can be analyzed separately by image processing. If any of these morphologies, however, contains a larger number of stacked crystals, data of tilted crystal stacks in particular can currently not be analyzed. Sheets constitute the most desirable morphology, allowing for the preparation of very flat samples for cryo-EM [2]. This is at present the only type of morphology that may be amenable to collection and analysis of electron diffraction data of highly ordered samples [3]. We could reproducibly induce single-layered sheet formation in the large majority of 2D crystals of two different enzyme samples and are working towards a general protocol applicable to other membrane protein 2D crystals.

Single-step antibody-based affinity cryo-electron microscopy for imaging and structural analysis of macromolecular assemblies.

Single particle cryo-electron microscopy (cryo-EM) is an emerging powerful tool for structural studies of macromolecular assemblies (i.e., protein complexes and viruses). Although single particle cryo-EM requires less concentrated and smaller amounts of samples than X-ray crystallography, it remains challenging to study specimens that are low-abundance, low-yield, or short-lived. The recent development of affinity grid techniques can potentially further extend single particle cryo-EM to these challenging samples by combining sample purification and cryo-EM grid preparation into a single step. Here we report a new design of affinity cryo-EM approach, cryo-SPIEM, that applies a traditional pathogen diagnosis tool Solid Phase Immune Electron Microscopy (SPIEM) to the single particle cryo-EM method. This approach provides an alternative, largely simplified and easier to use affinity grid that directly works with most native macromolecular complexes with established antibodies, and enables cryo-EM studies of native samples directly from cell cultures. In the present work, we extensively tested the feasibility of cryo-SPIEM with multiple samples including those of high or low molecular weight, macromolecules with low or high symmetry, His-tagged or native particles, and high- or low-yield macromolecules. Results for all these samples (non-purified His-tagged bacteriophage T7, His-tagged Escherichiacoli ribosomes, native Sindbis virus, and purified but low-concentration native Tulane virus) demonstrated the capability of cryo-SPIEM approach in specifically trapping and concentrating target particles on TEM grids with minimal view constraints for cryo-EM imaging and determination of 3D structures.

Measurement of ice thickness on vitreous ice embedded cryo-EM grids: investigation of optimizing condition for visualizing macromolecules

Abstract Background Cryo-electron microscopy is an excellent method for the structural analysis of biological materials. Advantage of its use over conventional electron microscopy techniques is the preservation of the sample in a near-native, hydrated state. To achieve the analysis with greatly improved structural details, optimization of various parameters involved in sample vitrification is required. Most considerable parameter is the thickness of ice: thick and thin layers are ideally in favor for larger and smaller target objects. Findings We measured the thickness of vitreous ice from different types of widely used holey carbon grids using cryo-EM and electron energy loss spectroscopy. It showed that Quantifoil grids are suitable for the structural analysis of large biological macromolecules (>100 nm in size), whereas the use of lacey and C-flat grids are ideal for smaller particles. Conclusions This report provides informative details that may help increasing chances of obtaining optimal vitreous ice for various biological objects with different sizes, hence facilitate the successful application of cryo-electron microscopy.

Low-Cost Cryo-Light Microscopy Stage Fabrication for Correlated Light/Electron Microscopy

The coupling of cryo-light microscopy (cryo-LM) and cryo-electron microscopy (cryo-EM) poses a number of advantages for understanding cellular dynamics and ultrastructure. First, cells can be imaged in a near native environment for both techniques. Second, due to the vitrification process, samples are preserved by rapid physical immobilization rather than slow chemical fixation. Third, imaging the same sample with both cryo-LM and cryo-EM provides correlation of data from a single cell, rather than a comparison of "representative samples". While these benefits are well known from prior studies, the widespread use of correlative cryo-LM and cryo-EM remains limited due to the expense and complexity of buying or building a suitable cryogenic light microscopy stage. Here we demonstrate the assembly, and use of an inexpensive cryogenic stage that can be fabricated in any lab for less than $40 with parts found at local hardware and grocery stores. This cryo-LM stage is designed for use with reflected light microscopes that are fitted with long working distance air objectives. For correlative cryo-LM and cryo-EM studies, we adapt the use of carbon coated standard 3-mm cryo-EM grids as specimen supports. After adsorbing the sample to the grid, previously established protocols for vitrifying the sample and transferring/handling the grid are followed to permit multi-technique imaging. As a result, this setup allows any laboratory with a reflected light microscope to have access to direct correlative imaging of frozen hydrated samples.

Low-Cost Cryo-Light Microscopy Stage Fabrication for Correlated Light/Electron Microscopy

The coupling of cryo-light microscopy (cryo-LM) and cryo-electron microscopy (cryo-EM) poses a number of advantages for understanding cellular dynamics and ultrastructure. First, cells can be imaged in a near native environment for both techniques. Second, due to the vitrification process, samples are preserved by rapid physical immobilization rather than slow chemical fixation. Third, imaging the same sample with both cryo-LM and cryo-EM provides correlation of data from a single cell, rather than a comparison of "representative samples". While these benefits are well known from prior studies, the widespread use of correlative cryo-LM and cryo-EM remains limited due to the expense and complexity of buying or building a suitable cryogenic light microscopy stage. Here we demonstrate the assembly, and use of an inexpensive cryogenic stage that can be fabricated in any lab for less than $40 with parts found at local hardware and grocery stores. This cryo-LM stage is designed for use with reflected light microscopes that are fitted with long working distance air objectives. For correlative cryo-LM and cryo-EM studies, we adapt the use of carbon coated standard 3-mm cryo-EM grids as specimen supports. After adsorbing the sample to the grid, previously established protocols for vitrifying the sample and transferring/handling the grid are followed to permit multi-technique imaging. As a result, this setup allows any laboratory with a reflected light microscope to have access to direct correlative imaging of frozen hydrated samples.

Human LDL core cholesterol ester packing: three-dimensional image reconstruction and SAXS simulation studies

Human LDL undergoes a reversible thermal order-disorder phase transition associated with the cholesterol ester packing in the lipid core. Structural changes associated with this phase transition have been shown to affect the resistance of LDL to oxidation in vitro studies. Previous electron cryo-microscopy studies have provided image evidence that the cholesterol ester is packed in three flat layers in the core at temperatures below the phase transition. To study changes in lipid packing, overall structure and particle morphology in three dimensions (3D) subsequent to the phase transition, we cryo-preserved human LDL at a temperature above phase transition (53°C) and examined the sample by electron microscopy and image reconstruction. The LDL frozen from 53°C adopted a different morphology. The central density layer was disrupted and the outer two layers formed a "disrupted shell"-shaped density, located concentrically underneath the surface density of the LDL particle. Simulation of the small angle X-ray scattering curves and comparison with published data suggested that this disrupted shell organization represents an intermediate state in the transition from isotropic to layered packing of the lipid. Thus, the results revealed, with 3D images, the lipid packing in the dynamic process of the LDL lipid-core phase transition.