Critical Charge Research Articles

XIII—Reclaiming the Idea of ‘the Human’

Abstract Progressive social movements correctly presume that justice demands treating people with humane regard: combining respect for human agency with concern for human vulnerability to suffering. Promoting humane regard is a critical means of acknowledging the moral claims of humanity. Some critics reject the underlying concept of a universal humanity, in virtue of which human beings form a distinct community of reciprocal moral obligation. Critics charge that the concept presumes indefensible dualisms (of mind and body, and humanity and nature); that it wrongly assigns a privileged status to reason; and that it involves an unsupportable belief in human exceptionalism. I argue that we can assert the moral claims of humanity without privileging reason, repudiating nature, or denying that there are many valuable ways to be human. I also defend an account of human moral exceptionalism that does not imply human moral superiority, to show that we can meet morally weighty obligations to humans while affirming morally substantive connections to non-human communities and domains.

Criticality of global monopole charges in diverse dimensions

In this work, we construct charged AdS black holes with a global monopole charge in diverse dimensions and study the thermodynamics. We find a critical monopole charge below which the solution exhibits Van-der Waals like behaviors. In the context of holography, this could be interpreted using the boundary degrees of freedoms. As an example, we study the phase diagram in the four dimensions analytically. We further analyze the microstructures of the solution using Ruppeiner geometry. We find that repulsive interactions dominates for black holes in a wide range of temperatures. However, around the critical point, attractive interactions is dominant and the Ruppeiner scalar curvature shows universal behaviors: it has a critical exponent 2 and coefficient -1/8\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$-1/8$$\\end{document} in diverse dimensions. Universality of the results is interpreted from the scaling behavior of free energy near the critical point for Van-der Waals like fluids.

Numerical study on positive streamer in parallel-rod dielectric barrier discharge in atmospheric air

In this work, a parallel-rod dielectric barrier discharge (DBD) operating in atmospheric air is investigated through the two-dimensional plasma fluid model. The effects of applied voltage (Vp), secondary electron emission coefficient (γ), and photoionization are examined. Photoionization can significantly influence streamer dynamics by accelerating and broadening both volumetric and surface streamers and enhance the impact of the applied voltage. Without photoionization, the propagation distance of the surface streamer along the curved dielectric surface is limited to 0.1–0.2 mm under applied voltages of 8–8.5 kV. In contrast, with photoionization, this distance can extend to 0.3–0.6 mm. Achieving the same distance requires much higher voltages (10–11 kV) if without photoionization. The “double-layer” structure of the surface streamer is investigated, revealing that γ predominantly affects the surface branch with little impact on the volumetric branch. The critical charge density for streamer onset is found to be about 1018 m−3, and the volume-to-surface streamer transition is attributed to the lateral electric field provided by the space charges. This work provides insights into the regulation strategies and underlying mechanisms of streamer dynamics in parallel-rod DBDs in atmospheric air.

Single Layer Control of Nanoscale Metal-Insulator Transition at the LaAlO3/SrTiO3 Interface.

Modern quantum device fabrication often requires precisely adding and removing materials in situ at nanoscales, which is challenging for high-quality correlated oxide devices. In this work, we present a novel nanofabrication method that remotely controls the interfacial metal-insulator transition at the LaAlO3/SrTiO3 interface by selectively removing an LaAlO3 overlayer using a diamond tip. Remarkably, we observe a large force window within which single atomic layer precision of control is achievable. Our results confirm the critical thickness and charge transfer mechanism through a layer-by-layer removal process at the interface. Additionally, high-quality nanodevices, including nanochannels and single electron transistors, are successfully fabricated using this method. This nonvolatile and high-precision nanofabrication method provides a promising oxide platform for quantum engineering by harnessing the rich electron correlations at the nanoscale.

Critical adsorption and charge reversal in polyelectrolyte solutions: Analytical mean-field theory.

An analytical linearized mean-field theory is presented to describe the adsorption behavior of polyelectrolytes near charged colloidal surfaces with additional short-ranged non-electrostatic interactions. The coupling between the polyelectrolyte segment density and electrostatic potential is explicitly accounted for in a self-consistent manner. This coupling gives rise to highly non-linear behavior, such as oscillations of the electrostatic potential. We derive analytical expressions for the critical surface charge density σc, after which adsorption takes place, and recover the well-known σc∼ns3/2 scaling regime, where ns is the salt concentration. In addition, the theory yields a new ns1 scaling regime if the surface is hard and a unified ns1 scaling regime if the surface also possesses some short-ranged attraction with the polyelectrolyte. Furthermore, we derive an analytical expression to describe the critical polyelectrolyte concentration φc to achieve complete charge reversal, which is found to scale as φc ∼ σ2/(f2c2), where c is related to the magnitude of short-ranged interactions and f is the average charge per monomer of the polyelectrolyte. It is observed that within our theory, complete charge reversal can only take place if the short-ranged interactions are sufficiently strong to completely compensate for the entropy loss of adsorption.

Optimal allocation of distributed energy resources to cater the stochastic E-vehicle loading and natural disruption in low voltage distribution grid

The everyday extreme uncertainties become the new normal for our world. Critical infrastructures like electrical power grid and transportation systems are in dire need of adaptability to dynamic changes. Moreover, stringent policies and strategies towards zero carbon emission require the heavy influx of renewable energy sources (RES) and adoption of electric transportation systems. In addition, the world has seen an increased frequency of extreme natural disasters. These events adversely impact the electrical grid, specifically the less hardened distribution grid. Hence, a resilient electrical network is the demand of the future to fulfill critical loads and charging of emergency electrical vehicles (EV). Therefore, this paper proposes a two-dimensional methodology in planning and operational phase for a resilient electric distribution grid. Initially stochastic modelling of EV load has been performed duly considering the geographical feature and commute pattern to form probability distribution functions. Thenceforth, the impact assessment of extreme natural events like earthquakes using damage state classification has been done to model the impact on distribution grid. The efficacy of the proposed methodology has been tested by simulating an urban Indian distribution grid with mapped EV on DigSILENT PowerFactory integrated with supervised learning tools on Python. Subsequently 24-h load profile before event and after event have been compared to analyze the impact.

Critical charges for droplet collisions

Two micron-sized water droplets approaching each other do not always coalesce due to the cushioning effect of the air between them. When the droplets do not carry any electrical charges, one needs to consider the breakdown of hydrodynamics at very small scales to decide whether the droplets collide and coalesce or not. In contrast, two approaching droplets that are oppositely charged always coalesce if the charges are large enough. To find the charge for which the transition to charge-dominated collisions occurs, we computed the collision efficiency of charged, hydrodynamically interacting droplets settling in quiescent air, including the noncontinuum regime at small interfacial distances. For oppositely charged droplets, we find that the transition occurs when a saddle point of the relative droplet dynamics exits the region within which the continuum hydrodynamics breaks down. For cloud droplets with radii 16 and 20µm, we observe that the transition occurs at ∼103 elementary charges e. For charges smaller than this, we predict that the coalescence rate depends primarily upon the Knudsen number (Kn, the ratio of the mean-free-path of air to the mean droplet radius), whereas coalescence for much larger charges does not depend upon Kn. For droplets charged with the same polarity, we find the critical charge to be substantially larger (∼104e for the above radii) for reasons that we discuss. Published by the American Physical Society 2024

Geometric properties of the first singlet S-wave excited state of two-electron atoms near the critical nuclear charge

Abstract In this work the geometric structure parameters and radial density distribution of 1s2s 1 S excited state of the two-electron atomic system near the critical nuclear charge Z c were calculated in detail under tripled Hylleraas basis set. Contrary to the localized behavior observed in the ground and the doubly excited 2p 2 3 P e states, for this state our results identify that while the behavior of the inner electron increasingly resembles that of a hydrogen-like atomic system, the outer electron in the excited state exhibits diffused hydrogen-like character and becomes perpendicular to the inner electron as nuclear charge Z approaches Z c. This study provides insights into the electronic structure and stability of the two-electron system in the vicinity of the critical nuclear charge.

A unified model for mechanical deformations of single stranded DNA-microbeam biosensors considering surface charge effects

A unified energy model for mechanical deformation of the microbeam included by single stranded DNA (ssDNA) adsorption considering the surface charge density on substrate is investigated. First, a free energy model is established to quantify the deflection and axial displacement of the microbeam, the ion concentration in the solution, as well as the electric potential distribution inside and outside the ssDNA film with a uniform surface charge density. Then, the governing equations and corresponding boundary conditions are obtained by minimizing the free energy with three types of variational variables. And, the relationship of the electric potential difference between the two sides of the ssDNA film and the deformation of microcantilever and simply support beam are determined in different solutions (1: 1, 1: 2, 1: 3). Moreover, the numerical solutions of the electric potential distribution inside and outside the ssDNA film are investigated by using the finite difference method and Newton's iteration method. The results suggest that the nonlinear model for electric potential distribution should be used under higher surface charge density. By fitting and comparing the present predictions with Arroyo-Hernandez's experimental data, the effectiveness of the model is verified. The study shows that the surface charge density can modulate the magnitude and direction of ssDNA-microbeam deformation, which also indicates that there exists a critical surface charge density, causing the failure of ssDNA-microbeam detection. These conclusions are helpful for designing the efficient biosensors based on DNA-microbeam.

THz Wave Power Enhancement Using a Microstrip Line-Based Combiner Integrated with Arrayed UTC-PDs

Advancements in semiconductor devices, such as Uni-travelling-carrier photodiodes (UTC-PDs), have played a significant role in the development of Terahertz communication technology. However, the persistent challenge is the limited output power from a single UTC-PD required for practical transmission distances. To enhance the output power, we propose and demonstrate a novel Terahertz wave power combining technique using a photomixer device comprising two arrayed UTC-PDs monolithically integrated with a microstrip line-based 2 × 1 Wilkinson power combiner and a patch antenna on a Silicon Carbide (SiC) substrate at 300 GHz. When the two UTC-PDs are activated at photocurrents of 8 mA and 10 mA, the device exhibits a 7.3 dB increase in power relative to the power obtained when only the 8 mA UTC-PD is activated, and a 4.4 dB increase in power relative to the power obtained with the 10 mA UTC-PD. This implies that power can be enhanced by a factor of N2 if the photocurrent is multiplied by N. Additionally, we demonstrate that the UTC-PD output saturation depends on the space charge effect, which modulates the electric field in the depletion region and results from critical charge density of about 80 kA/cm2 for the device in this work.

Theoretical and simulation analysis for R290 leakage from split-type air conditioners

Propane (R290) is a promising refrigerant for split-type household air conditioners with the advantages of energy saving, environmentally friendliness and low charge. Nevertheless, the large scale use of R290 has been hindered by its high flammability. The potential fire hazards can be relieved by reducing R290 releasable charge, and numerous methods have been put forward. In the authors’ previous papers, the method of refrigerant pump-down was proposed and a mathematical model of critical releasable charge (CRC, ignition threshold of leakage) was developed by dimensional analysis, but it is difficult to reflect the actual physical process of R290 dispersion. To reveal the leakage and dispersion mechanism of R290, a new numerical model of CRC is developed based on mechanism analysis in this work, in which the turbulent jet model, Coanda effect and dimensional analysis are involved. The predicted CRCs agree well with experimental and simulated data. Besides, the influence of indoor air speed with its direction parallel to the IDU panel on R290 concentration field is investigated by computational fluid dynamics (CFD) under different releasable charges. It is found that there is a transition value of air speed, below which the fire hazards decrease greatly with the increase of air speed, on the contrary, when the air speed is above the transition value, raising air speed has little impact on fire hazards.

Electron-Induced Single-Event Effect in 28 nm SRAM-Based FPGA

As the feature size of integrated circuit decreases, the critical charge of single-event effect decreases as well, making nano-scale devices more susceptible to the high-energy charged particles during their application in space. Here, we study the electron-induced single-event effect in 28 nm static random-access memory (SRAM)-based field programmable gate array (FPGA) utilizing high-energy electrons with energy of 1 MeV~5 MeV. The experimental results demonstrate that the 3 MeV electrons can cause single-event functional interrupts (SEFIs) in FPGA, while the electrons with other energies cannot. To further explore the mechanism of electron-induced SEFIs in this nanoscale FPGA, we combined Monte Carlo, Technology Computer-Aided Design (TCAD), and Simulation Program with Integrated Circuit Emphasis (SPICE) simulations. It is revealed that the SEFI was mainly caused by the direct ionization effect of high-energy electrons, and the SEFI was related to the interactions between multiple sensitive nodes.

Design of polarity hardening SRAM for mitigating single event multiple node upsets

With technology scaling down, the charge sharing among multiple nodes has becoming significant, making Single Event Multiple Node Upsets (SEMNUs) has become one of the major concern in memory cell designs. In this paper, a design of polarity hardening memory cell (PH_14T) is proposed for mitigating Single Event Multiple Node Upsets (SEMNUs). Through the 3D TCAD mixed-mode simulation established that the high robustness against SEU and SEMNUs of the PH_14T cell. Additionally, Cadence Spectre simulation results demonstrated that the proposed PH_14T cell has smaller write access time, lower power consumption, and highest critical charge compared to radiation-hardened cells. Monte Carlo simulation further confirmed the high radiation tolerance and high reliability of the proposed cell against SNU and DNU.

SEDONUT: A Single Event Double Node Upset Tolerant SRAM for Terrestrial Applications

Radiation and its effect on neighboring nodes are critical not only for space applications but also for terrestrial applications at modern lower-technology nodes. This may cause static random-access memory (SRAM) failures due to single- and multi-node upset. Hence, this article proposes a 14T radiation-hardened-based SRAM cell to overcome soft errors for space and critical terrestrial applications. Simulation results show that the proposed cell can be resilient to any single event upset and single event double node upset at its storage nodes. This cell uses less power than others. The hold, read, and write stability increases compared with most considered cells. The higher critical charge of the proposed SRAM increases radiation resistance. Simulation results demonstrate that out of all compared SRAMs, only DNUSRM and the proposed SRAM show 0% probability of logical flipping. Also, other parameters such as total critical charge, write stability, read stability, hold stability, area, power, sensitive area, write speed, and read speed of the proposed SRAM are improved by –19.1%, 5.22%, 25.7%, –5.46%, 22.5%, 50.6%, 60.0%, 17.91%, and 0.74% compared with DNUSRM SRAM. Hence, the better balance among the parameters makes the proposed cell more suitable for space and critical terrestrial applications. Finally, the post-layout and Monte Carlo simulation validate the efficiency of SRAMs.

A 45nm AND 65nm CMOS IMPLEMENTATION OF 12T SRAM CELL WITH SOFT ERROR READ STABILITY OF MULTINODE UPSET RECOVERABILITY FOR AEROSPACE APPLICATION

With technology advancing rapidly, the size of transistors and the distance between them is decreasing quickly. This reduction in size is causing the critical charge of sensitive nodes in SRAM cells to decrease, making them more susceptible to soft errors, especially in aerospace applications. When a radiation particle strikes a open node in a standard 6T SRAM cell, the storage data in the cell can be changed, leading to a single-event upset (SEU). To address this issue, a new Soft Error Read and write Stability improves Low Power 12T (SARP12T) SRAM cell has been introduced in this study to reduce the impact of SEUs. The performance of SARP12T has been compared to other recently developed soft-error-aware SRAM cells like QUCCE12T, QUATRO12T, RHD12T, RHPD12T, and RSP14T. SARP12T is designed for the recoverability of all stored data in sensitive nodes even if they are affected by radiation strikes. Additionally, SARP12T can overcome single-event multi-node upsets (SEMNUs) that may happened at its sensitive node pair. This proposed cell also boasts the higher read stability, as the storage node holding '0' can regain from any upset during read operations. Moreover, SARP12T consumes the minimum amount of hold power, has greater write ability, and lower write delay compared to other similar cells. Despite a almost greater read delay and higher read and write energy consumption, the improvements in the proposed SARP12T cell make it a promising solution for mitigating soft errors in SRAM cells

The Effect of Lysozyme on the Aggregation and Charging of Oxidized Carbon Nanohorn (CNHox) in Aqueous Solution

To clarify the effect of proteins on the charging and aggregation–dispersion characteristics of oxidized carbon nanohorn (CNHox), we measured the electrophoretic mobility and stability ratios as a function of concentrations of a model protein, lysozyme (LSZ), and KCl. The zeta potential from the electrophoretic mobility of CNHox was neutralized and reversed by the addition of oppositely charged LSZ. Electrical and hydrophobic interactions between CNHox and LSZ can be attributed to the adsorption and charge reversal of CNHox. The stability ratio of CNHox in the presence or absence of LSZ showed Derjaguin–Landau and Verwey–Overbeek (DLVO) theory-like behavior. That is, the slow aggregation regime, fast aggregation regime, and critical coagulation concentration (CCC) were identified. At the isoelectric point, only the fast aggregation regime was shown. The existence of patch-charge attraction due to the charge heterogeneity on the surface was inferred to have happened due to the enhanced aggregation of CNHox at high LSZ dosage and low electrolyte concentration. The relationship between critical coagulation ionic strength and surface charge density at low LSZ dosage showed that the aggregation of CNHox is in line with the DLVO theory. An obvious decrement in the Hamaker constant at high LSZ dosage can probably be found due to an increased interaction of LSZ-covered parts.

Charge Regulation at the Nanoscale as Evidenced from Light-Responsive Nanoemulsions.

Emulsions are indispensable in everyday life, and the demand for emulsions' diversity and control of properties is therefore substantial. As emulsions possess a high internal surface area, an understanding of the oil/water (o/w) interfaces at the molecular level is fundamental but often impaired by experimental limitations to probe emulsion interfaces in situ. Here, we have used light-responsive surfactants (butyl-AAP) that can photoisomerize between E and Z isomers by visible and UV light irradiation to tune the emulsion interfaces. This causes massive changes in the interface tension at the extended o/w interfaces in macroemulsions and a drastic shift in the surfactants' critical micelle concentration, which we show can be used to control both the stability and phase separation. Strikingly different from macroemulsions are nanoemulsions (RH ∼90 nm) as these are not susceptible to E/Z photoisomerization of the surfactants in terms of changes in their droplet size or ζ-potential. However, in situ second-harmonic scattering and pulsed-field gradient nuclear magnetic resonance (NMR) experiments show dramatic and reversible changes in the surface excess of surfactants at the nanoscopic interfaces. The apparent differences in ζ-potentials and surface excess provide evidence for a fixed charge to particle size ratio and the need for counterion condensation to renormalize the particle charge to a critical charge, which is markedly different compared to the behavior of very large particles in macroemulsions. Thus, our findings may have broader implications as the electrostatic stabilization of nanoparticles requires much lower surfactant concentrations, allowing for a more sustainable use of surfactants.

Quantum criticality in chains of planar rotors with dipolar interactions.

In this work, we perform a density matrix renormalization group study of chains of planar rotors interacting via dipolar interactions. By exploring the ground state from weakly to strongly interacting rotors, we find the occurrence of a quantum phase transition between a disordered and a dipole-ordered quantum state. We show that the nature of the ordered state changes from ferroelectric to antiferroelectric when the relative orientation of the rotor planes varies and that this change requires no modification of the overall symmetry. The observed quantum phase transitions are characterized by critical exponents and central charges, which reveal different universality classes ranging from that of the (1 + 1)D Ising model to the 2D classical XY model.

Static Robust Design Optimization Using the Stochastic Frontier Method: A Case Study of Pulsed EPD Process on TiO2 Films

This paper aims to optimize a pulsed electrophoretic deposition (EPD) process for TiO2 films. This is accomplished by determining the optimal configuration of the coating parameters from a robust optimization perspective. The experimental study uses a composite central design (CCD) with four control factors, i.e., the initial concentration (x1 in g/L), the deposition time (x2 in s), the duty cycle (x3 in %), and the voltage (x4 in V). The process responses that should all be maximized are the photocatalytic efficiency of the thin film (De) and three critical charges, which characterize the adhesion failure, i.e., LC1: the load at which the first cracks occurred; LC2: the load at which the film starts to delaminate at the edge level of the scratch track; and LC3: the load when the damage of the film exceeds 50%. This paper compares the robust optimization design of the EPD process using two methods: the robust design of processes and products using the stochastic frontier (RDPP-SF) and the surface response and desirability function methods. The findings show that the RDPP-SF method is superior to the response surface–desirability method for the process responses De and LC2 because of non-natural sources of variation; however, both methods perform comparably well while analyzing the LC1 and LC3 responses, which are subjected to pure random variability. The parameters setting for the process robust optimization are met in run 25 (x1 = 14 g/L, x2 = 150 s, x3 = 50%, and x4 40 V).

MULTIBIT UPSETS OF ONBOARD SPACECRAFT ELECTRONICS FROM A SINGLE COSMIC RADIATION PARTICLE

The analysis of the e ect of high-energy protons of space radiation on the onboard electronics of the spacecraft is carried out. It is shown that protons can cause nuclear reactions with atomic nuclei of electronics material. The residual nuclei formed as a result of a nuclear reaction have su ciently high energy to cross the sensitive areas of several bits of electronics, and the high ionizing ability of nuclear fragments allows generating an excess charge of carriers exceeding the critical charge for the failure to occur simultaneously in several bits of the electronic device.