Repair Of Critical-sized Bone Defects Research Articles

Large-Pore Platelet-Rich Fibrin with a Mg Ring to Allow MC3T3-E1 Preosteoblast Migration and to Improve Osteogenic Ability for Bone Defect Repair.

Platelet-rich fibrin (PRF) is a natural fibrin meshwork material with multiple functions that are suitable for tissue engineering applications. PRF provides a suitable scaffold for critical-size bone defect treatment due to its platelet cytokines and rich growth factors. However, the structure of PRF not only promotes cell attachment but also, due to its density, provides a pool for cell migration into the PRF to facilitate regeneration. In our study, we used repeated freeze drying to enlarge the pores of PRF to engineer large-pore PRF (LPPRF), a type of PRF that has expanded pores for cell migration. Moreover, a biodegradable Mg ring was used to provide stability to bone defects and the release of Mg ions during degradation may enhance osteoconduction and osteoinduction. Our results revealed that cell migration was more extensive when LPPRF was used rather than when PRF was used and that LPPRF retained the growth factors present in PRF. Moreover, the Mg ions released from the Mg ring during degradation significantly enhanced the calcium deposition of MC3T3-E1 preosteoblasts. In the present study, a bone substitute comprising LPPRF combined with a Mg ring was demonstrated to have much potential for critical-size bone defect repair.

Sinusoidal electromagnetic fields accelerate bone regeneration by boosting the multifunctionality of bone marrow mesenchymal stem cells

BackgroundThe repair of critical-sized bone defects is always a challenging problem. Electromagnetic fields (EMFs), used as a physiotherapy for bone defects, have been suspected to cause potential hazards to human health due to the long-term exposure. To optimize the application of EMF while avoiding its adverse effects, a combination of EMF and tissue engineering techniques is critical. Furthermore, a deeper understanding of the mechanism of action of EMF will lead to better applications in the future.MethodsIn this research, bone marrow mesenchymal stem cells (BMSCs) seeded on 3D-printed scaffolds were treated with sinusoidal EMFs in vitro. Then, 5.5 mm critical-sized calvarial defects were created in rats, and the cell scaffolds were implanted into the defects. In addition, the molecular and cellular mechanisms by which EMFs regulate BMSCs were explored with various approaches to gain deeper insight into the effects of EMFs.ResultsThe cell scaffolds treated with EMF successfully accelerated the repair of critical-sized calvarial defects. Further studies revealed that EMF could not directly induce the differentiation of BMSCs but improved the sensitivity of BMSCs to BMP signals by upregulating the quantity of specific BMP (bone morphogenetic protein) receptors. Once these receptors receive BMP signals from the surrounding milieu, a cascade of reactions is initiated to promote osteogenic differentiation via the BMP/Smad signalling pathway. Moreover, the cytokines secreted by BMSCs treated with EMF can better facilitate angiogenesis and osteoimmunomodulation which play fundamental roles in bone regeneration.ConclusionIn summary, EMF can promote the osteogenic potential of BMSCs and enhance the paracrine function of BMSCs to facilitate bone regeneration. These findings highlight the profound impact of EMF on tissue engineering and provide a new strategy for the clinical treatment of bone defects.

Exosome-Functionalized Ceramic Bone Substitute Promotes Critical-Sized Bone Defect Repair in Rats.

Ceramic biomaterials are promising alternatives to bone autografts. However, limited bioactivity affects their performance. Therefore, bioactive molecules and cells are often added to enhance their performance. Exosomes have emerged as cell-secreted vesicles, delivering proteins, lipids, and nucleic acids in a paracrine/endocrine fashion. We studied two complementary aspects required for exosome activity/therapy using purified exosomes: first, the intracellular uptake of labeled exosomes and second, the influence of delivered exosomes on cell behavior. Origin-specific differences in the characteristics of purified exosomes, quantification of time-dependent intracellular uptake of PKH-26-labeled exosomes by mesenchymal stem cells (MSCs) and preosteoblasts, and influence on cell behavior were evaluated. Furthermore, exosomes from osteoblasts and MSCs cultured under normal and osteogenic environments were isolated. There is little data available on the concentration and dose of exosomes required for bone regeneration. Therefore, equal amounts of quantified exosomes were implanted in vivo in rat tibia critical defects using a calcium sulfate-nano-hydroxyapatite nanocement (NC) bone filler as the carrier. Bone regeneration was quantified using micro-computed tomography and histology. Along with inducing early maturation and mineral deposition by primary preosteoblasts in vitro, exosome treatment also demonstrated a positive effect on bone mineralization in vivo. Our study concludes that providing a local delivery of exosomes loaded onto a slowly resorbing NC bone filler can provide a potential alternate to autografts as a bone substitute.

Masquelet's induced membrane technique: Review of current concepts and future directions.

Masquelet's induced membrane technique (MIMT) is a relatively new, two-stage surgical procedure to reconstruct segmental bone defects. First performed by Dr. Masquelet in the mid-1980s, MIMT has shown great promise to revolutionize critical-sized bone defect repair and has several advantages over its alternative, distraction osteogenesis (DO). Also, its success in extremely challenging cases (defects > 15 cm) suggests that its study could lead to discovery of novel biological mechanisms that might be at play during segmental defect healing and fracture non-union. MIMT's advantages over DO have led to a world-wide increase in MIMT procedures over the past decades. However, MIMT often needs to be repeated and so the average initial success rate in adults lags significantly behind that of DO (86% vs 95%, respectively). The autologous foreign-body membrane created during the first stage by the immune system's response to a polymethyl methacrylatebone cement spacer is critical to supporting the morselized bone graft implanted in the second stage. However, the biological and/or physical mechanisms by which the membrane supports graft to bone union are unclear. This lack of knowledge makes refining MIMT and improving the success rates through technique improvements and patient selection a significant challenge and hinders wider adoption. In this review, current knowledge from basic, translational, and clinical studies is summarized. The dynamics of both stages under normal conditions as well as with drug or material perturbations is discussed along with perspectives on high-priority future research directions.

Hierarchically Porous Osteoinductive Poly(hydroxyethyl methacrylate-co-methyl methacrylate) Scaffold with Sustained Doxorubicin Delivery for Consolidated Osteosarcoma Treatment and Bone Defect Repair.

A bifronted cure system for osteosarcoma, a common aggressive bone tumor, is highly in demand to prevail the postsurgical adversities in connection with systemic chemotherapy and repair of critical-size bone defects. The hierarchically porous therapeutic scaffolds presented here are synthesized by free radical-initiated copolymerization of hydroxyethyl methacrylate and methyl methacrylate [HEMA/MMA 80:20 and 90:10 mM, H2O/NaCl porogen], which are further surface-phosphorylated [P-PHM] and transformed to bifunctional by impregnating doxorubicin (DOX) [DOXP-PHM]. The P-PHM scaffolds exhibited porous microarchitecture analogous to native cancellous bone (scanning electron microscopy analysis), while X-ray photoelectron spectroscopy analysis authenticated surface phosphorylation. Based on pore characteristics, swelling attributes and slow-pace degradation, P-PHM9163 and P-PHM8263 (HEMA/MMA 90:10 and 80:20 with H2O/NaCl: 60/3.0 weight %, respectively) were chosen from the series and evaluated for osteoinductive efficacy in vitro. Both P-PHM9163 and P-PHM8263 invoked calcium phosphate mineralization in simulated physiological conditions (day 14) with Ca/P ratios of 1.58 and 1.66 respectively, comparable to human bone (1.67). Early biomineralization (Alizarin Red S and von Kossa staining) was evidenced at day 7, while osteoblast differentiation was verified by time-dependent expression of the typical late marker, osteocalcin, at day 14 and 21 in rat bone marrow mesenchymal cells. DOX-loaded P-PHM9163 (DOXP-PHM9163) exhibited pH-responsive (tumor analogous pH; 6.5) sustained release of DOX for prolonged time (up to 45 days) and invoked cellular alterations by cortical stress fiber formation and DNA fragmentation in human osteosarcoma cells leading to early apoptosis (24 h), validated by annexin V/PI staining (FACS) and immunostaining (F-actin/DAPI). Subsequent to DOX release tenure, the scaffold induced the formation of well-organized, porous post-release Ca-P apatite coating (Ca/P is 1.3) in simulated body fluid (day 14) which further endorses the dual functionality of the system. Altogether, the results accentuate that DOXP-PHM9163 is a potential bifunctional therapeutic scaffold capable of extended localized chemotherapeutic delivery in-line with inherent osteogenesis for efficient bone cancer treatment.

Wnt1 boosts fracture healing by enhancing bone formation in the fracture callus.

Despite considerable improvement in fracture care, 5-10% of all fractures still heal poorly or result in non-union formation. Therefore, there is the urgent need to identify new molecules that can be used to improve bone fracture healing. One activator of the Wnt-signaling cascade, Wnt1, has recently gained attention for its intense osteoanabolic effect on the intact skeleton. The aim of the present study was to investigate whether Wnt1 might be a promising molecule to accelerate fracture healing both in skeletally healthy and osteoporotic mice that display a diminished healing capacity. Transgenic mice for a temporary induction of Wnt1 specifically in osteoblasts (Wnt1tg) were subjected to femur osteotomy. Non-ovariectomized and ovariectomized Wnt1tg mice displayed significantly accelerated fracture healing based on a strong increase in bone formation in the fracture callus. Transcriptome profiling revealed that Hippo/YAP-signaling and BMP-signaling pathways were highly enriched in the fracture callus of Wnt1tg animals. Immunohistochemical staining confirmed increased activation of YAP1 and expression of BMP2 in osteoblasts in the fracture callus. Therefore, our data indicate that Wnt1 boosts bone formation during fracture healing via YAP/BMP signaling both under healthy and osteoporotic conditions. To further test a potential translational application of Wnt1, we applied recombinant Wnt1 embedded into a collagen gel during critical size bone defect repair. Mice treated with Wnt1 displayed increased bone regeneration compared to control mice accompanied by increased YAP1/BMP2 expression in the defect area. These findings are of high clinical relevance because they indicate that Wnt1 could be used as a new therapeutic agent to treat orthopaedic complications in the clinic.

Three-dimensional printing of a β-tricalcium phosphate scaffold with dual bioactivities for bone repair

β-Tricalcium phosphate (β-TCP) had been widely used in the field of bone defect repair because of its osteoconduction and osteoinduction properties. However, for critical-sized bone defects, β-TCP scaffolds need to be functionalised to enhance osteoinduction and antibacterial activity. In this study, we proposed a protocol for mimicking a mussel adhesion mechanism to immobilise bone morphoprotein 2 mimetic peptide (BMP2-MP) and Ornithodoros savignyi (OS) on a three-dimensionally printed β-TCP scaffold. BMP2-MP and the OS polypeptides containing the YKYKY tail were converted into 3,4‐dihydroxyphenylalanine (DOPA) molecules via hydroxylase. The surface morphology and phase composition of the different scaffolds were analysed via scanning electron microscopy and X-ray diffraction. In addition, the binding activity of BMP2-MP and OS containing the DOPA tail to the scaffold were evaluated. The antibacterial activity of the different scaffolds was studied in vitro by performing bacteriostatic experiments against Escherichia coli and Staphylococcus aureus. The osteoinduction capability of the different scaffolds was evaluated by detecting osteogenesis-associated genes via quantitative polymerase chain reaction and by determining alkaline phosphatase expression levels. Our results demonstrated that introduction of the DOPA tail enhanced the binding capability of BMP2-MP and OS with the β-TCP scaffold, thereby enhancing the antibacterial and osteoinduction capabilities of the scaffold. A scaffold with strong antibacterial and osteoinduction capability will have good application prospects in the field of critical-sized bone defect repair.

Three-dimensional bioprinting of multicell-laden scaffolds containing bone morphogenic protein-4 for promoting M2 macrophage polarization and accelerating bone defect repair in diabetes mellitus

Critical-sized bone defect repair in patients with diabetes mellitus remains a challenge in clinical treatment because of dysfunction of macrophage polarization and the inflammatory microenvironment in the bone defect region. Three-dimensional (3D) bioprinted scaffolds loaded with live cells and bioactive factors can improve cell viability and the inflammatory microenvironment and further accelerating bone repair. Here, we used modified bioinks comprising gelatin, gelatin methacryloyl (GelMA), and 4-arm poly (ethylene glycol) acrylate (PEG) to fabricate 3D bioprinted scaffolds containing BMSCs, RAW264.7 macrophages, and BMP-4-loaded mesoporous silica nanoparticles (MSNs). Addition of MSNs effectively improved the mechanical strength of GelMA/gelatin/PEG scaffolds. Moreover, MSNs sustainably released BMP-4 for long-term effectiveness. In 3D bioprinted scaffolds, BMP-4 promoted the polarization of RAW264.7 to M2 macrophages, which secrete anti-inflammatory factors and thereby reduce the levels of pro-inflammatory factors. BMP-4 released from MSNs and BMP-2 secreted from M2 macrophages collectively stimulated the osteogenic differentiation of BMSCs in the 3D bioprinted scaffolds. Furthermore, in calvarial critical-size defect models of diabetic rats, 3D bioprinted scaffolds loaded with MSNs/BMP-4 induced M2 macrophage polarization and improved the inflammatory microenvironment. And 3D bioprinted scaffolds with MSNs/BMP-4, BMSCs, and RAW264.7 cells significantly accelerated bone repair. In conclusion, our results indicated that implanting 3D bioprinted scaffolds containing MSNs/BMP-4, BMSCs, and RAW264.7 cells in bone defects may be an effective method for improving diabetic bone repair, owing to the direct effects of BMP-4 on promoting osteogenesis of BMSCs and regulating M2 type macrophage polarization to improve the inflammatory microenvironment and secrete BMP-2.

The co-culture of ASCs and EPCs promotes vascularized bone regeneration in critical-sized bone defects of cranial bone in rats

BackgroundThe repair of critical-sized bone defect represents a challenging problem in bone tissue engineering. To address the most important problem in bone defect repair, namely insufficient blood supply, this study aimed to find a method that can promote the formation of vascularized bone tissue.MethodThe phenotypes of ASCs and EPCs were identified respectively, and ASCs/EPCs were co-cultured in vitro to detect the expression of osteogenic and angiogenic genes. Furthermore, the co-culture system combined with scaffold material was used to repair the critical-sized bone defects of the cranial bone in rats.ResultsThe co-culture of ASCs/EPCs could increase osteogenesis and angiogenesis-related gene expression in vitro. The results of in vivo animal experiments demonstrated that the ASC/EPC group could promote bone regeneration and vascularization in the meantime and then significantly accelerate the repair of critical-sized bone defects.ConclusionIt is feasible to replace traditional single seed cells with ASC/EPC co-culture system for vascularized bone regeneration. This system could ultimately enable clinicians to better repair the defect of craniofacial bone and avoid donor site morbidity.

Fabrication and Biological Activity of 3D-Printed Polycaprolactone/Magnesium Porous Scaffolds for Critical Size Bone Defect Repair.

Polycaprolactone (PCL) is widely used in bone tissue engineering due to its biocompatibility and mechanical strength. However, PCL is not biologically active and shows poor hydrophilicity, making it difficult for new bones to bind tightly to its surface. Magnesium (Mg), an important component of natural bone, exhibits good osteo-inductivity and biological activity. Therefore, porous PCL/Mg scaffolds, including pure PCL, PCL/5%Mg, PCL/10%Mg, and PCL/15%Mg, were prepared to elucidate whether the porous structure of scaffolds and the bioactivity of PCL may be enhanced via 3D printing and incorporation of Mg powder. Compared with the control group (pure PCL only), the hydrophilicity of composite PCL/Mg scaffolds was greatly increased, resulting in the scaffolds having decreased water contact angles. Tests for adhesion and proliferation of rat bone marrow mesenchymal stem cells (rBMSCs) indicated that the PCL/10%Mg scaffold showed superior compatibility. Furthermore, as indicated by alkaline phosphatase (ALP) activity and semiquantitative analysis of alizarin red staining, PCL/10%Mg scaffolds exhibited significantly stronger osteogenic activity than the other scaffolds. Animal experiments demonstrated that PCL/10%Mg scaffolds displayed pro-osteogenic effects at an early stage (4 weeks) and produced more new bone mass 8-12 weeks following implantation, compared with the control group. Visceral and blood parameter analyses indicated that PCL/10%Mg scaffolds did not exert any noticeable toxic effects. PCL/10%Mg composite scaffolds were found to promote bone defect repair at an early stage with good cytocompatibility. This finding revealed a new concept in designing bone tissue materials, which showed potential as a clinical treatment for bone defects.

Concentration-dependent effects of latex F1-protein fraction incorporated into deproteinized bovine bone and biphasic calcium phosphate on the repair of critical-size bone defects.

F1-protein fraction (F1) is a natural bioactive compound extracted from the rubber tree, Hevea brasiliensis, and has been recently studied for its therapeutic potential in wound healing. In this study, we investigated the concentration-dependent effects of F1 (0.01%, 0.025%, 0.05%, and 0.1%) incorporated into deproteinized bovine bone (DBB) and porous biphasic calcium phosphate (pBCP), on the repair of rat calvarial critical-size bone defects (CSBD). The defects were analyzed by 3D-microtomography and 2D-histomorphometry at 12 weeks postsurgery. The binding efficiency of F1 to pBCP (96.3 ± 1.4%) was higher than that to DBB (67.7 ± 3.3%). In vivo analysis showed a higher bone volume (BV) gain in all defects treated with DBB (except in 0.1% of F1) and pBCP (except in 0.05% and 0.1% of F1) compared to the CSBD without treatment/control group (9.96 ± 2.8 mm3 ). DBB plus 0.025% F1 promoted the highest BV gain (29.7 ± 2.2 mm3 , p < .0001) compared to DBB without F1 and DBB plus 0.01% and 0.1% of F1. In the pBCP group, incorporation of F1 did not promote bone gain when compared to pBCP without F1 (15.9 ± 4.2 mm3 , p > .05). Additionally, a small BV occurred in defects treated with pBCP plus 0.1% F1 (10.4 ± 1.4 mm3, p < .05). In conclusion, F1 showed a higher bone formation potential in combination with DBB than with pBCP, in a concentration-dependent manner. Incorporation of 0.25% F1 into DBB showed the best results with respect to bone formation/repair in CSBD. These results suggest that DBB plus 0.25% F1 can be used as a promising bioactive material for application in bone tissue engineering.

Vascular Supply and Bone Marrow Concentrate for the Improvement of Allograft in Bone Defects: A Comparative In Vivo Study

BackgroundSurgical repair of critical-sized bone defects still remains a big challenge in orthopedic surgery. Biological enhancement, such as growth factors or cells, can stimulate a better outcome in bone regeneration driven by well-established treatments such as allogenic bone graft. However, despite the surgical options available, correct healing can be slowed down or compromised by insufficient vascular supply to the injured site. Materials and methodsIn this pilot study, critical size bone defects in rabbit radius were treated with allograft bone, in combination with vascular bundle and autologous bone marrow concentrate seeded onto a commercial collagen scaffold. Microtomographical, histological and immunohistochemical assessments were performed to evaluate allograft integration and bone regeneration. ResultsResults showed that the surgical deviation of vascular bundle in the bone graft, regardless from the addition of bone marrow concentrate, promote the onset of healing process at short experimental times (8 wk) in comparison with the other groups, enhancing graft integration. ConclusionThe surgical procedure tested stimulates bone healing at early times, preserving native bone architecture, and can be easily combined with biological adjuvant.

Controlled Delivery of Natural Medicinal Compounds from Tissue Engineering Scaffolds for Critical-Sized Bone Defect Repair

With an increasing life expectancy and aging population, orthopedic defects and bone graft surgeries are increasing in global prevalence. Research to date has greatly advanced the understanding of bone biology and defect repair mechanism, leading to a marked success in the development of synthetic bone substitutes. Yet, the quest for a functionalized bone grafts prompted the researchers to pursue a viable and safer alternative that regulates cellular activity, and supports bone regeneration and healing process without causing serious side-effects and tissue toxicity. In this context, researchers have found a novel treatment regimen by introducing naturally derived medicinal compounds (NMSs) in bone tissue engineering scaffold that enables them to release at a desirable rate and concentration, maintains a sustained release allowing sufficient time for tissue in-growth, and guides bone regeneration process with minimized risk of tissue toxicity. NMCs are gaining popularity in western countries for the last two decades and is now being used by 80% of the population worldwide, according to an estimation by WHO. In contrast to synthetic drugs, NMCs have a broader range of safety window and thus presented as suitable for prolonged localized delivery for bone tissue regeneration. There is limited literature focusing on the integration of bone grafts and natural medicines that provides detailed scientific evidences on each NMCs, their toxic limits and particular application in bone tissue engineering, which could guide the researchers to develop functionalized implants for various bone disorders. This review will discuss the emerging trend of NMC drug delivery from tissue engineering scaffold, including both 3D printed structures and surface modified implants, highlighting the significance and potential of NMCs for bone health, guiding future paths toward the development of an ideal bone tissue engineering scaffold.

Hyper-Crosslinked Carbohydrate Polymer for Repair of Critical-Sized Bone Defects.

This study evaluated the safety and efficacy of a novel hyper-crosslinked carbohydrate polymer (HCCP) for the repair of critical-sized bone defects in comparison to two alternative treatments: autologous bone and poly(lactide-co-glycolide) with hyaluronic acid (PLGA/HA). Bilateral critical-sized defects were created in the lateral femoral condyles of skeletally mature New Zealand White rabbits, and they were subsequently implanted with HCCP, PLGA/HA, or autologous bone in a randomized manner. Clinical and behavioral observations were made daily, and radiological and histopathological evaluations were performed at 4, 10, and 16 weeks postimplantation. Defects implanted with HCCP showed progressive bone regeneration and bridging of the defect without adverse histological events. No signs of infection or inflammation associated with the implant material were observed in all animals that received HCCP implantation. A radiographic assessment performed at 16 weeks post-implantation showed significantly higher bone density and volume in defects implanted with HCCP compared to PLGA/HA. No statistically significant difference was observed in bone density and volume between HCCP and autologous bone. These findings demonstrate that HCCP is biocompatible, osteoconductive, and capable of promoting bone regeneration in vivo; therefore, it is suitable for both tissue engineering and the repair of critical-sized bone defects.

Highly versatile cell-penetrating peptide loaded scaffold for efficient and localised gene delivery to multiple cell types: From development to application in tissue engineering

Gene therapy has recently come of age with seven viral vector-based therapies gaining regulatory approval in recent years. In tissue engineering, non-viral vectors are preferred over viral vectors, however, lower transfection efficiencies and difficulties with delivery remain major limitations hampering clinical translation. This study describes the development of a novel multi-domain cell-penetrating peptide, GET, designed to enhance cell interaction and intracellular translocation of nucleic acids; combined with a series of porous collagen-based scaffolds with proven regenerative potential for different indications. GET was capable of transfecting cell types from all three germ layers, including stem cells, with an efficiency comparable to Lipofectamine® 3000, without inducing cytotoxicity. When implanted in vivo, GET gene-activated scaffolds allowed for host cell infiltration, transfection localized to the implantation site and sustained, but transient, changes in gene expression – demonstrating both the efficacy and safety of the approach. Finally, GET carrying osteogenic (pBMP-2) and angiogenic (pVEGF) genes were incorporated into collagen-hydroxyapatite scaffolds and with a single 2 μg dose of therapeutic pDNA, induced complete repair of critical-sized bone defects within 4 weeks. GET represents an exciting development in gene therapy and by combining it with a scaffold-based delivery system offers tissue engineering solutions for a myriad of regenerative indications.

Multiscale analyses reveal native-like lamellar bone repair and near perfect bone-contact with porous strontium-loaded bioactive glass

The efficient healing of critical-sized bone defects using synthetic biomaterial-based strategies is promising but remains challenging as it requires the development of biomaterials that combine a 3D porous architecture and a robust biological activity. Bioactive glasses (BGs) are attractive candidates as they stimulate a biological response that favors osteogenesis and vascularization, but amorphous 3D porous BGs are difficult to produce because conventional compositions crystallize during processing. Here, we rationally designed a porous, strontium-releasing, bioactive glass-based scaffold (pSrBG) whose composition was tailored to deliver strontium and whose properties were optimized to retain an amorphous phase, induce tissue infiltration and encourage bone formation. The hypothesis was that it would allow the repair of a critical-sized defect in an ovine model with newly-formed bone exhibiting physiological matrix composition and structural architecture. Histological and histomorphometric analyses combined with indentation testing showed pSrBG encouraged near perfect bone-to-material contact and the formation of well-organized lamellar bone. Analysis of bone quality by a combination of Raman spectral imaging, small-angle X-ray scattering, X-ray fluorescence and focused ion beam-scanning electron microscopy demonstrated that the repaired tissue was akin to that of normal, healthy bone, and incorporated small amounts of strontium in the newly formed bone mineral. These data show the potential of pSrBG to induce an efficient repair of critical-sized bone defects and establish the importance of thorough multi-scale characterization in assessing biomaterial outcomes in large animal models.

Osteoinductivity of Porous Biphasic Calcium Phosphate Ceramic Spheres with Nanocrystalline and Their Efficacy in Guiding Bone Regeneration.

Conventional biphasic calcium phosphate (BCP) bioceramics are facing many challenges to meet the demands of regenerative medicine, and their biological properties are limited to a large extent due to the large grain size in comparison with nanocrystalline of natural bone mineral. Herein, this study aimed to fabricate porous BCP ceramic spheres with nanocrystalline (BCP-N) by combining alginate gelatinizing with microwave hybrid sintering methods and investigated their in vitro and in vivo combinational osteogenesis potential. For comparison, spherical BCP granules with microcrystalline (BCP-G) and commercially irregular BCP granules (BAM, BCP-I) were selected as control. The obtained BCP-N with specific nanotopography could well initiate and regulate in vitro biological response, such as degradation, protein adsorption, bone-like apatite formation, cell behaviors, and osteogenic differentiation. In vivo canine intramuscular implantation and rabbit mandible critical-sized bone defect repair further confirmed that nanotopography in BCP-N might be responsible for the stronger osteoinductivity and bone regenerative ability than BCP-G and BCP-I. Collectedly, due to nanotopographic similarities with nature bone apatite, BCP-N has excellent efficacy in guiding bone regeneration and holds great potential to become a potential alternative to standard bone grafts in bone defect filling applications.

Preclinical alternative model for analysis of porous scaffold biocompatibility in bone tissue engineering.

Using scaffolds with appropriate porosity represents a potential approach for repair of critical-size bone defects. Vascularization is essential for bone formation and healing. This study investigates methods for monitoring angiogenesis within porous biopolymer scaffolds on the basis of polyhydroxybutyrate (PHB)/chitosan. We use the chick and quail chorioallantoic membrane (CAM) assay as an in vivo model focused on the formation of new blood vessels inside the implant structure. Chemical properties of the surface in biopolymer scaffold matrix were characterized as well as the tissue reaction of the CAM. Implantation of a piece of polymer scaffold results in vascular reaction, documented visually and by ultrasound biomicroscopy. Histological analysis shows myofibroblast reaction (smooth muscle actin-positive cells) without excessive collagen deposition. Cell invasion is observed inside the implant, and QH1 marker, detecting hemangioblasts and endothelial cells of quail origin, confirms the presence of vascular network. The CAM assay is a rapid and easy way to test biocompatibility and vasculogenic potential of new candidate scaffolds for bone tissue bioengineering with respect to the 3R´ s.

Assessment of the degradation rates and effectiveness of different coated Mg-Zn-Ca alloy scaffolds for in vivo repair of critical-size bone defects

Surgical repair of bone defects remains challenging, and the search for alternative procedures is ongoing. Devices made of Mg for bone repair have received much attention owing to their good biocompatibility and mechanical properties. We developed a new type of scaffold made of a Mg-Zn-Ca alloy with a shape that mimics cortical bone and can be filled with morselized bone. We evaluated its durability and efficacy in a rabbit ulna-defect model. Three types of scaffold-surface coating were evaluated: group A, no coating; group B, a 10-μm microarc oxidation coating; group C, a hydrothermal duplex composite coating; and group D, an empty-defect control. X-ray and micro-computed tomography(micro-CT) images were acquired over 12 weeks to assess ulnar repair. A mechanical stress test indicated that bone repair within each group improved significantly over time (P < 0.01). The degradation behavior of the different scaffolds was assessed by micro-CT and quantified according to the amount of hydrogen gas generated; these measurements indicated that the group C scaffold better resisted corrosion than did the other scaffold types (P < 0.05). Calcein fluorescence and histology revealed that greater mineral densities and better bone responses were achieved for groups B and C than for group A, with group C providing the best response. In conclusion, our Mg-Zn-Ca-alloy scaffold effectively aided bone repair. The group C scaffold exhibited the best corrosion resistance and osteogenesis properties, making it a candidate scaffold for repair of bone defects.

Mesenchymal stem cells and porous \u03b2-tricalcium phosphate composites prepared through stem cell screen-enrich-combine(\u2212biomaterials) circulating system for the repair of critical size bone defects in goat tibia

BackgroundEfficacious bone substitute is essential for the treatment of a critical size bone defect. Currently, the bone substitutes commonly used in clinical practice lack osteogenic capacity and the therapeutic efficacy is not ideal. Herein, a novel stem cell screen-enrich-combine(−biomaterials) circulating system (SECCS) was introduced to provide the substitutes with osteogenic ability. The stem cell screening, enrichment, and recombination with substitutes could be integrated during the surgical operation. Using SECCS, the bioactive mesenchymal stem cells (MSCs) and porous β-tricalcium phosphate (β-TCP) composites (MSCs/β-TCP) were rapidly prepared for critical size bone defect repair and validated in goat models of critical size tibia defects.MethodsTwelve goats with right hind limb tibia defects of 30 mm were randomly divided into two groups: six (the experimental group) were treated with MSCs/β-TCP prepared by SECCS and the other six goats (the control group) were treated with pure porous β-TCP. The repair effect was assessed by x-ray, computed tomography (CT), micro-CT, histology and histomorphology 6 months after the operation. In addition, the enrichment efficacy of MSCs and the characteristics of the MSCs/β-TCP prepared by SECCS were evaluated.ResultsThe SECCS could compound about 81.3 ± 3.0% of the MSCs in bone marrow to the porous β-TCP without affecting the cell viability. The average number of MSCs for retransplantation was 27,655.0 ± 5011.6 for each goat from the experimental group. In vitro, satisfactory biocompatibility of the MSCs/β-TCP was performed, with the MSCs spreading adequately, proliferating actively, and retaining the osteogenic potential. In vivo, the defect repair by MSCs/β-TCP with good medullary cavity recanalization and cortical remodeling was significantly superior to that of pure porous β-TCP.ConclusionsThe MSCs/β-TCP prepared through SECCS demonstrated significant therapeutic efficacy in goat models of critical size bone defect. This provides a novel therapeutic strategy for critical size bone defects caused by severe injury, infection, and bone tumor resection with a high profile of safety, effectiveness, simplicity, and ease.