Critical Gelation Temperature Research Articles

Preparation and sustained-release mechanism of hydroxybutyl chitosan/graphene oxide temperature-sensitive hypoglycaemic subcutaneous implants

The current situation of diabetes prevention and control is extremely severe. For instance, glimepiride (GLM), a third-generation sulfonylurea, demonstrates suboptimal clinical efficacy in oral dosage forms, which underscores the pressing need for the development of a new dosage form. Recently, in situ gel subcutaneous implants have garnered considerable attention. Hydroxybutyl chitosan (HBC) can spontaneously crosslink to form a thermosensitive hydrogel and has good biocompatibility. However, its application is hindered by its limited mechanical properties. Graphene oxide (GO), known for its stable dispersion in water, can load GLM through π–π stacking interactions. When combined with HBC, GO enhances the mechanical properties and stability of the hydrogel. Therefore, an HBC–GO@GLM hydrogel was prepared. Rheological analysis revealed that the incorporation of GO increased the critical gelation temperature of the 5 wt% HBC hydrogel from 19.1°C to 27.2°C, considerably enhancing the mechanical properties of the hydrogel. Using encapsulation efficiency as an evaluation index, the optimal encapsulation efficiency of GO@GLM was determined to be 73.53% ± 0.45% with a drug loading capacity of 27.39 ± 0.17% using the Box–Behnken design model. Computer simulation technology validated the interaction between the materials and the drug release mechanism. Pharmacokinetic results showed that compared to the HBC@GLM group, the half-life (t1/2), mean residence time and the area under the curve for the HBC–GO@GLM group were approximately 3 times those of the HBC@GLM group. Subcutaneous implantation of the HBC–GO@GLM hydrogel for drug delivery considerably extended the drug’s action time in the body, thereby maintaining blood sugar levels within a normal and stable range for an extended period.

Gelation Behaviour of Pluronic F127/Polysaccharide Systems Revealed via Thioflavin T Fluorescence.

Fast, reliable methods for characterizing the micelle-to-gel transition in emerging Pluronic F127/polysaccharide materials are essential for tailoring their applications as in situ gelling delivery systems. This study describes a simple fluorimetric method based on the response to gelation of the molecular probe thioflavin T (ThT). The techniques employed are (second derivative) steady-state and synchronous fluorescence. The capabilities of ThT as gelation reporter are tested for three model systems: Pluronic F127 (P16.6%), Pluronic F127/alginate (P16.6%ALG2%) and Pluronic F127/hyaluronic acid (P16.6%HA0.5%). We demonstrate that the changes in the short and long wavelength emissions of ThT allow accurate determination of the critical gelation temperatures in the investigated systems. The spectroscopic data providing information at molecular level are complemented with differential scanning microcalorimetric results revealing additional macroscopic insight into the micellization process. The gelation study is preceded by a solvatochromic analysis of ThT.

Formation and In Vitro Simulated Digestion Study of Gelatinized Korean Pine Seed Oil Encapsulated with Calcified Wax

Natural waxes have demonstrated exceptional potential as oil gels for saturated and trans fatty acids, but their application has been limited by issues such as temperature sensitivity, lack of stability and durability, and compatibility. In this study, three types of wax (Beeswax (BW), Rice bran wax (RBW), and Carnauba wax (CW)) were combined with calcium hydroxide to produce calcified wax. The calcified Korean pine seed oil gel obtained by heating and stirring with Korean pine seed oil is responsive to temperature and has environmental adaptability. The effects of critical gel concentration, temperature regulation, texture properties, microstructure, oil-holding capacity, and FT-IR on the quality parameters of oil gel were investigated. Additionally, an in vitro digestion model was developed to comprehend the decomposition rate of fat during gel structure digestion and transportation. The results demonstrated a close correlation between the critical gelation concentration and calcium ion content. Furthermore, after calcification, the hardness followed the order BW > CW > RBW. Moreover, there was an approximate 10 °C increase in wax melting point. Conversely, BW:Ca exhibited the lowest oil leakage. The microstructures revealed that the oil gels formed post-wax calcification exhibited similar fractal dimension (Db) values (<7 μm), and the intermolecular forces were characterized by van der Waals forces, which were consistent with those observed in the non-calcified group. In conjunction with the vitro digestion simulation, our findings demonstrated that RBW and CW oil gels gradually released 20%, 35%, and 35% of free fatty acids (FFA) within the initial 30 min of intestinal digestion. Importantly, the FFA release rate was significantly attenuated, thereby providing a foundation for developing wax-based gel processed foods that facilitate gentle energy release benefits for healthy weight management.

Three-Dimensional Biomaterials with Spatiotemporal Control for Regenerative Tissue Engineering.

At Morehouse College, one of the nation's top liberal arts historically black colleges and universities (HBCU) for African American men, research experiences are used to enhance the liberal arts educational experience. Securing research funding to train HBCU students is highly competitive and challenging due to the review process that is typically vetted by scientists from research-intensive universities who may not be familiar with the HBCU enterprise that may be comprised of insolvent infrastructures. In this Account, the synthesis and preparation of synthetic polymeric biomaterials that are used to facilitate or support changes in biological processes, enhance mechanical properties, and foster tissue growth in three dimensions (3D) under disease conditions will be discussed. The use of biomaterials to help control biological processes in disease states is limited. Hence, the fabrication of 3D scaffolds with chemical variability to grow or repair damaged tissues by inhibiting molecular pathways shows promise by controlling the cellular response to recapitulate 3D tissues and organs. The Mendenhall laboratory at Morehouse College uses 3D biomaterials to solve biological problems by probing cellular mechanistic pathways using natural products and nanoparticles. Toward this end, we have fabricated and manufactured 3D biomaterial scaffolds using chemical strategies to mitigate biological processes to help restore pristine tissue properties. Hydrogels are 3D polymeric matrixes that swell in aqueous environments and support cell growth that later infuriates the 3D matrix to create new tissue(s). In contrast, electrospun fibers use high electric fields to create porous 3D polymeric structures that can be used to create 3D tissue molds.The synergistic use of 3D biomaterial templates that can inhibit cellular damage while providing a mechanically strong scaffold to support regenerative tissue growth is essential to creating the next generation of biomaterials. This approach will require foresight using tools from synthetic biology, molecular biology, autonomous processes, advanced biomanufacturing, and machine learning (ML). The use of several biomaterials has been explored by the Mendenhall laboratory to design, prepare, fabricate, characterize, and evaluate 3D electrospun fibers and hydrogels containing hybrid compositions of polylactic acid (PLA), poly(n-vinylcaprolactam) (PVCL), cellulose acetate (CA), and methacrylated hyaluronic acid (meHA). This work contributed to the newly fabricated PVCL-CA fibers with morphological changes and nanoscale fiber hydrophobic surface properties. While the use of electrospun fibers can create hierarchal scaffolds for bone tissue engineering, the use of injectable gels for nonporous tissues such as articular cartilage presents another compelling biomaterial challenge. Using graft polymerization, we prepared PVLC-graft-HA and studied the effect of lower critical solution temperatures (LCSTs), gelation temperatures, and mechanical properties using temperature-controlled rheology. Additionally, we reported that articular cartilage (chondrocyte) cells seeded in PVCL-g-HA gels and incubated at hypoxia 1% O2 produced a 10-fold increase in extracellular matrix proteins (collagen) after 10 days. This work supported exploring new approaches to protecting chondrocyte cells under hypoxia using a 3D scaffold technology.

Thermo-Responsive Injectable Hydrogels Formed by Self-Assembly of Alginate-Based Heterograft Copolymers.

Polysaccharide-based graft copolymers bearing thermo-responsive grafting chains, exhibiting LCST, have been designed to afford thermo-responsive injectable hydrogels. The good performance of the hydrogel requires control of the critical gelation temperature, Tgel. In the present article, we wish to show an alternative method to tune Tgel using an alginate-based thermo-responsive gelator bearing two kinds of grafting chains (heterograft copolymer topology) of P(NIPAM86-co-NtBAM14) random copolymers and pure PNIPAM, differing in their lower critical solution temperature (LCST) about 10 °C. Interestingly, the Tgel of the heterograft copolymer is controlled from the overall hydrophobic content, NtBAM, of both grafts, implying the formation of blended side chains in the crosslinked nanodomains of the formed network. Rheological investigation of the hydrogel showed excellent responsiveness to temperature and shear. Thus, a combination of shear-thinning and thermo-thickening effects provides the hydrogel with injectability and self-healing properties, making it a good candidate for biomedical applications.

Acylhydrazone functionalized naphthalene-based self-assembled supramolecular gels for efficient fluorescence detection of Fe3.

A new gel factor (named N) has been successfully designed and synthesized, which contains the conventional fluorophore naphthalene with the acylhydrazone bond as the self-assembly site. It can be self-assembled into stable organogels (named ON) in dimethyl sulfoxide (DMSO) and water mixed medium (V : V = 4 : 1) with a critical gel temperature and concentration (55 °C and 10 mg mL-1). Interestingly, under 365 nm UV light, the ON exhibits bright yellow Aggregation Induced Emission (AIE). The supramolecular organogel ON shows a fluorescent "OFF" response to the metal ions Fe3+, and the state of the gel ON remains constant before and after detection. Notably, the minimum detection limits (LODs) of the gel ON for Fe3+ are as low as 1.30 × 10-7 M. The binding mechanism of supramolecular organogels (ON) to ions has been investigated through a series of characterizations. Meanwhile, the organogel sensor ON can also be used as an ion-responsive membrane for the detection of Fe3+ in the aqueous phase.

Cellulose Nanocrystals-Incorporated Thermosensitive Hydrogel for Controlled Release, 3D Printing, and Breast Cancer Treatment Applications.

In situ-gel-forming thermoresponsive copolymers have been widely exploited in controlled delivery applications because their critical gel temperature is similar to human body temperature. However, there are limitations to controlling the delivery of biologics from a hydrogel network because of the poor networking and reinforcement between the copolymer networks. This study developed an in situ-forming robust injectable and 3D printable hydrogel network based on cellulose nanocrystals (CNCs) incorporated amphiphilic copolymers, poly(ε-caprolactone-co-lactide)-b-poly(ethylene glycol)-b-poly(ε-caprolactone-co-lactide (PCLA). In addition, the physicochemical and mechanical properties of injectable hydrogels were controlled by physically incorporating CNCs with amphiphilic PCLA copolymers. CNCs played an unprecedented role in physically reinforcing the PCLA copolymers' micelle network via intermicellar bridges. Apart from that, the free-flowing closely packed rod-like CNCs incorporated PCLA micelle networks at low temperature transformed to a stable viscoelastic hydrogel network at physiological temperature. CNC incorporated PCLA copolymer sols effectively coordinated with hydrophobic doxorubicin and water-soluble lysozyme by a combination of hydrophobic and hydrogen bonding interaction and controlled the release of biologics. As shown by the 3D printing results, the biocompatible PCLA hydrogels continuously extruded during printing had good injectability and maintained high shape fidelity after printing without any secondary cross-linking steps. The interlayer bonding between the printed layers was high and formed stable 3D structures up to 10 layers. Subcutaneous injection of free-flowing CNC incorporated PCLA copolymer sols to BALB/c mice formed a hydrogel instantly and showed controlled biodegradation of the hydrogel depot without induction of toxicity at the implantation sites or surrounding tissues. At the same time, the in vivo antitumor effect on the MDA-MB-231 tumor xenograft model demonstrated that DOX-loaded hydrogel formulation significantly inhibited the tumor growth. In summary, the CNC incorporated biodegradable hydrogels developed in this study exhibit a prolonged release with special release kinetics for hydrophobic and hydrophilic biologics.

Microneedles assisted controlled and improved transdermal delivery of high molecular drugs via in situ forming depot thermoresponsive poloxamers gels in skin microchannels

Skin is considered as an attractive route for variety of drug molecule administration. However, it is proved to be the main physical barrier for drug flux owing to their poor permeability and low bioavailability across stratum corneum layer. In the current study, novel approach has been used to enhance transdermal delivery via microporation through combination of poloxamers gels and microneedles (MNs) arrays. The phase transition of poloxamers at various concentrations from sol–gel was evaluated using AR2000 rheometer to confirm MNs-assisted in situ forming depots. Temperature test confirmed gelation between 32 and 37 °C. Curcumin was loaded in poloxamer formulations at variable concentrations and its effect showed reduction in critical gelation temperature (CGT) owing to its hydrophobic nature. Microneedle arrays (600 µm) prepared from Gantrez S-97, PEG10000 and gelatin B using (19 × 19) laser-engineered silicone micromoulds showed high mechanical stability investigated via Texture analyzer. From in situ dissolution profile, gelatin 15% w/w based MNs displayed quicker dissolution rate in comparison to PG10000. VivoSight® OCT scanner and dye tracking confirmed that PG10000 MNs arrays pierced SC layer, infiltrate the epidermis and goes to dermis layer. From in vitro permeation, it was concluded that 20% w/w PF127® gel formulations containing (0.1% and 0.3%) curcumin displayed high curcumin permeation for comparatively longer time through microporated skin samples in comparison to non-microporated skin. The curcumin distribution in skin tissues with higher florescence intensity was noted in MNs treated skin samples by confocal microscopy. FTIR confirmed the structure formation of fabricated MNs, while TGA showed dry, brittle and rigid nature of gelatin MNs.

Temperature-Responsive Aldehyde Hydrogels with Injectable, Self-Healing, and Tunable Mechanical Properties.

Injectable and self-healing hydrogels with exemplary biocompatibility and tunable mechanical properties are urgently needed due to their significant advantages for tissue engineering applications. Here, we report a new temperature-responsive aldehyde hydrogel with dual physical-cross-linked networks and injectable and self-healing properties prepared from an ABA-type triblock copolymer, poly{[FPMA(4-formylphenyl methacrylate)-co-DEGMA[di(ethylene glycol) methyl ether methacrylate]-b-MPC(2-methacryloyloxyethyl phosphorylcholine)-b-(FPMA-co-DEGMA)}. The thermoresponsive poly(DEGMA) segments drive the dehydration and hydrophobic interaction, enabling polymer chain winding as the first cross-linking network, when the temperature is raised above the critical gelation temperature. Meanwhile, the benzaldehyde groups offer physical interactions, including hydrogen bonding and hydrophobic and π-π stacking interactions as the second cross-linking network. When increasing the benzaldehyde content in the triblock copolymers from 0 to 8.2 mol %, the critical gelation temperature of the resulted hydrogels dropped from 35.5 to 19.9 °C and the mechanical modulus increased from 21 to 1411 Pa. Owing to the physical-cross-linked networks, the hydrogel demonstrated excellent injectability and self-healing properties. The cell viabilities tested from MTT assays toward both normal lung fibroblast cells (MRC-5) and cancerous cervical (HeLa) cells were found to be 100 and 101%, respectively, for varying polymer concentrations up to 1 mg/mL. The 3D cell encapsulation of the hydrogels was evaluated by a cytotoxicity Live/Dead assay, showing 92% cell viability. With these attractive physiochemical and biological properties, this temperature-responsive aldehyde hydrogel can be a promising candidate as a cell scaffold for tissue engineering.

Crucial Impact of Residue Chirality on the Gelation Process and Biodegradability of Thermoresponsive Polypeptide Hydrogels.

Thermosensitive polypeptide hydrogels have gained considerable attention in potential biomedical applications, of which the polymer structure may be tuned by residue chirality. In this study, polypeptide-based block copolymers with different chiralities were synthesized by ring-opening polymerization of γ-ethyl-l-glutamate N-carboxyanhydride and/or γ-ethyl-d-glutamate N-carboxyanhydride using amino-terminated monomethoxy poly(ethylene glycol) as a macroinitiator. All mPEG-polypeptide copolymers underwent sol-gel transition with an increase in temperature. The block copolymers with mixed enantiomeric residues of γ-ethyl-l-glutamate (ELG) and γ-ethyl-d-glutamate (EDG) in the polypeptide blocks exhibited lower critical gelation concentrations and lower critical gelation temperatures compared with those composed of pure ELG or EDG residues. We established that the difference in gelation properties between the copolymers was derived from the distinction of the secondary structures. We further demonstrated the influence of polypeptide chirality on the degradability and biocompatibility of hydrogels in vivo. Our findings provide insights into the design of hydrogels having tailored secondary conformation, gelation property, and biodegradability.

Thermoresponsive and Injectable Composite Hydrogels of Cellulose Nanocrystals and Pluronic F127.

Thermoresponsive amphiphilic Pluronic F127 triblock copolymer solutions have been widely investigated in smart biomaterial applications due to the proximity of its critical gel temperature to human body temperature. Meanwhile, cellulose nanocrystals (CNCs) have quickly become the focus of many drug delivery and tissue engineering applications due to their biocompatibility, abundance, ability to conjugate with drug molecules, and superior rheological properties. Herein, we investigate the phase behavior and thermo-rheological properties of the composite hydrogels containing cellulose nanocrystals (up to 5% by weight) and the temperature responsive Pluronic F127. Our results revealed an unprecedented role of CNC network formation on micellization and gelation behavior of the triblock copolymer. Linear and nonlinear rheological analysis suggest that at low and moderate nanocrystal loadings (1-3% by weight), the composite gel remarkably becomes softer and deformable compared to the neat Pluronic F127 gels. The softening effect results from the disruption of the close packed micelles by the rodlike CNCs. At high concentrations, however, the nanocrystals form their own network and the micelles are trapped within the CNC meshes. As a result, the original (neat F127) hard-gel modulus is recovered at 4 to 5% nanocrystal loading, yet the composite gel is much more deformable (and tougher) in the presence of the CNC network. Our temperature sweep experiments show that the CNC addition up to 3% does not change the rapid thermal gelation of the F127 solutions; therefore, these composites are suitable for smart drug delivery systems. On the other hand, at higher CNC concentrations, abrupt viscosity transition is not observed, rather the composite gels smoothly thicken with temperature in contrast to thermal thinning of the aqueous neat CNC. Thus, they can be used as smartly adaptive biolubricants and bioviscostatic materials.

Tuning the properties of hydrogen-bonded block copolymer worm gels prepared via polymerization-induced self-assembly.

Polymerization-induced self-assembly (PISA) is exploited to design hydrogen-bonded poly(stearyl methacrylate)-poly(benzyl methacrylate) [PSMA-PBzMA] worm gels in n-dodecane. Using a carboxylic acid-based RAFT agent facilitates hydrogen bonding between neighboring worms to produce much stronger physical gels than those prepared using the analogous methyl ester-based RAFT agent. Moreover, tuning the proportion of these two types of end-groups on the PSMA chains enables the storage modulus (G′) of a 20% w/w worm gel to be tuned from ∼4.5 kPa up to ∼114 kPa. This is achieved via two complementary routes: (i) an in situ approach using binary mixtures of acid- and ester-capped PSMA stabilizer chains during PISA or (ii) a post-polymerization processing strategy using a thermally-induced worm-to-sphere transition to mix acid- and ester-functionalized spheres at 110 °C that fuse to form worms on cooling to 20 °C. SAXS and rheology studies of these hydrogen-bonded worm gels provide detailed insights into their inter-worm interactions and physical behavior, respectively. In the case of the carboxylic acid-functionalized worms, SAXS provides direct evidence for additional inter-worm interactions, while rheological studies confirm both a significant reduction in critical gelation concentration (from approximately 10% w/w to 2–3% w/w) and a substantial increase in critical gelation temperature (from 41 °C to 92 °C). It is remarkable that a rather subtle change in the chemical structure results in such improvements in gel strength, gelation efficiency and gel cohesion.

Therapeutic effects of boronate ester cross-linked injectable hydrogels for the treatment of hepatocellular carcinoma.

Hepatocellular carcinoma is the most common malignancy with a high incidence rate and is the leading cause of cancer-related deaths. Herein, we developed a thermo-responsive hydrogel comprising poly(ε-caprolactone-co-lactide)-b-poly(ethylene glycol)-b-poly(ε-caprolactone-co-lactide (PCLA) that exhibits acidity-accelerated delivery of the tumor-targeting glucuronic acid-bearing doxorubicin (DOX-pH-GA) conjugate into tumor tissues. The PCLA copolymer was post-modified with boronic acid (BA-PCLA) to covalently cross-link with the pH-responsive DOX-pH-GA conjugate. The BA-PCLA copolymer effectively coordinated with the DOX-pH-GA conjugate through the boronate ester formation and showed a lower critical gelation temperature. The DOX conjugated via boronate ester exhibited a sustained release in vitro. Subcutaneous administration of PCLA copolymers formed in situ gels in the subcutaneous layers of Sprague-Dawley rats and degraded after 6 weeks. Similarly, BA-PCLA copolymers coordinated with DOX-pH-GA formed a stable in situ gel in vivo. In vivo imaging studies demonstrated that DOX-pH-GA was released in a sustained manner. The anti-tumor activity of the DOX releasing injectable hydrogel was examined using a HepG2 liver cancer xenograft model. The in vivo antitumor effect demonstrated that the DOX releasing hydrogel depot remarkably suppresses the tumor growth. These results demonstrate that the pH-responsive DOX releasing thermo-responsive hydrogel depot has great potential for application in localized anticancer therapy.

Unexpected observation of an intermediate hexagonal phase upon fluid-to-gel transition: SDS self-assembly in glycerol

Understanding morphological transformations upon temperature-induced mesophase transitions offers mechanistic insights into the self-assembly process. We have recently reported the unexpected formation of a microfibrillar lamellar gel in SDS-glycerol mixtures above a critical gelation concentration (CGC) as low as ~2 wt%. The gel phase comprised a fibrillar structure on the microscale and a lamellar structure on the nanoscale. Here, the nanoscopic structure of the gel as a function of temperature was probed with small-angle neutron scattering (SANS). The gel underwent a gel-to-fluid transition at a critical gelation temperature, TGC = 45 °C, forming cylindrical micelles at elevated temperatures. Upon cooling, a hexagonal phase formed at ~TGC, evident from the SANS Bragg peaks. This hexagonal phase upon the fluid-to-gel transition sheds light on the gelation mechanism, in which self-assembled SDS micelles undergo a cylindrical-to-lamellar morphological transition via a hexagonal phase. This unprecedented observation also highlights the complexity of self-assembly in nonaqueous hydrogen-bonding rich media.

The curious case of SDS self-assembly in glycerol: Formation of a lamellar gel

HypothesisHydrogen-bonding capacities of polar nonaqueous media significantly affect self-assembly behaviours of surfactants in these media. IntroductionGlycerol, a nonaqueous hydrogen-bonding solvent, is widely used in industrial formulations due to its desirable physical properties. Surfactants are ubiquitous in such applications; however, surfactant self-assembly in glycerol is not well understood. MethodsThe microscopic structure of the gel phase was studied using a series of imaging techniques: polarised light microscopy (PLM), confocal laser scanning microscopy (CLSM), and environmental scanning electron microscopy (ESEM). The rheological properties of the gel were studied using viscometry and oscillation rheology measurements. Further nano-structural characterisation was carried out using small-angle neutron scattering (SANS). ResultsWe have observed the unexpected formation of a microfibrillar gel in SDS and glycerol mixtures at a critical gelation concentration (CGC) as low as ~2 wt%; such SDS gelation has not been observed in aqueous systems. The microscopic structure of the gel consisted of microfibres some mm in length and with an average diameter of D ~ 0.5 μm. The fibres in the gel phase exhibited shear-induced alignment in the viscometry measurements, and oscillation tests showed that the gel was viscoelastic, with an elastic-dominated behaviour. Fitting to SANS profiles showed lamellar nano-structures in the gel microfibres at room temperature, transforming into cylindrical-micellar solutions above a critical gelation temperature, TCG ~ 45 °C. ConclusionsThese unprecedented observations highlight the markedly different self-assembly behaviours in aqueous and nonaqueous H-bonding solvents, which is not currently well understood. Deciphering such self-assembly behaviour is key to furthering our understanding of self-assembly on a fundamental level.

Effects of ethyl-L-glutamated and phenylalanine ratio/sequence on the secondary structure and gelation properties of their PEGylated copolymers

Injectable hydrogels have attracted great research interest for the delivery drugs and recruitment of cells to promote tissue regeneration. In this work, a series of the amino acid based methoxy-poly (ethylene glycol)-b-(poly (γ-ethyl-l-glutamate-co/b-l-phenylalanine) block copolymers (mPEG-b-P (ELG-co/b-Phe)s) with similar block chain length, but different proportion and sequence of γ-ethyl-l-glutamate (ELG) and l-phenylalanine (Phe) arrangements were prepared through ring-opening polymerization method. The influence of the ratio and sequence structures of mPEG-b-P (ELG-co/b-Phe)s on their thermosensitive aqueous gelation behaviors were investigated in detail. The results showed that the obtained polymers showned higher modulus (G’) and lower critical gelation temperature with higher proportion of l-phenylalanine. However, the physical properties start to deteriorate as the copolymers have a large number of phenylalanine groups. To clarify this phenomenon, the analysis of secondary structure with circular dichroism (CD) and fourier transform infrared (FTIR) spectrum showed that random coil reached a higher percentage as incorporated phenylalanine groups increased. On the other hand, the polymers with different sequence and similar compositions exhibited divergence due to the influence of random coil conformation. In addition, the good biocompatibility of mPEG-b-P (ELG-co-Phe)s were observed in vitro and in vivo. The copolymers have the potential to be used as thermo-sensitive injectable hydrogels for biomedical applications.

RSM based engineering of the critical gelation temperature in magneto-thermally responsive nanocarriers

The multistep release of therapeutic agents in the theranostic particulate systems has remained as a challenge in smart drug delivery. In this study, superparamagnetic nanoparticles of Fe3O4 were coated with a blend of F127/F68 grades of pluronic in order to adjust the lower critical solution temperature (LCST) and consequently engineering of the release temperature. Pluronic as a biocompatible thermo-sensitive polymer is frequently used as a self-emulsifying drug delivery system. Magnetite nanoparticles with double layer coating of oleic acid and pluronic F127 have been reported as an on-demand smart carrier for hydrophobic drugs. LCST was examined using differential scanning calorimetry (DSC) and temperature modulated DSC (TMDSC). Response surface methodology (RSM) was also applied for the design of experiments and modelling of LCST as a function of oleic acid content, polymer/particle, and F127/F68 ratio. The oleic acid content was optimized for the synthesis of the most hydrophilic nanocarrier with the highest drug capacity and the model was modified. The model has the advantage to be normalized appropriately to the specific area in various particle sizes. This study led the way for optimizing the LCST behavior in thermos-responsive systems.

Injectable Cholesterol-Enhanced Stereocomplex Polylactide Thermogel Loading Chondrocytes for Optimized Cartilage Regeneration.

Ideal cartilage tissue engineering requires scaffolds featuring good biocompatibility, large pore structure, high mechanical strength, as well as minimal invasion procedure. Although significant progress has been made in the development of polymer scaffolds, the construction of smart systems with all the desired properties is still emerging as a challenge. The thermogels of stereocomplex 4-arm poly(ethylene glycol)-polylactide (PEG-PLA) (scPLAgel ) and stereocomplex cholesterol-modified 4-arm PEG-PLA (scPLA-Cholgel ) from the equimolar enantiomeric 4-arm PEG-PLA and 4-arm PEG-PLA-Chol, respectively, are fabricated as scaffolds for cartilage tissue engineering. scPLA-Cholgel shows lower critical gelation temperature, higher mechanical strength, larger pore size, better chondrocyte adhesion, and slower degradation compared to scPLAgel as the benefit of cholesterol modification, which is more appropriate for cartilage regeneration. Moreover, the preservation of morphology, biomechanical property, cartilaginous specific matrix, as well as cartilaginous gene expressions of engineered cartilage mediated by scPLA-Cholgel are proven superior to those by scPLAgel . scPLA-Cholgel serves as a promising chondrocyte carrier for cartilage tissue engineering and gives an alternative solution to clinical cartilage repair.

Injectable thermosensitive hydrogel systems based on functional PEG/PCL block polymer for local drug delivery

Injectable in situ thermosensitive hydrogels have potential applications in tissue engineering and drug delivery. The hydrogel formulations exist as aqueous solutions at room temperature but rapidly solidify into gels at 37 °C in situ, making them highly suitable for administering drugs in a minimally invasive manner to the target organ(s). The hydrogel formed with nanoparticles assembled with amphiphilic polymer blocks of polyethyleneglycol (PEG) and biodegradable polycaprolactone (PCL) have been tested as platforms for targeted and sustained drug delivery, and have shown encouraging results. In this review, we summarize the influence of the molecular weight, PEG/PCL ratio and functional structure of hydrophobic PCL blocks on the critical gelation temperature, gelling behavior and drug release kinetics of the hydrogels. The current studies on the biomedical applications of thermosensitive PEG/PCL hydrogels have also been discussed.

Evaluation of microneedles-assisted in situ depot forming poloxamer gels for sustained transdermal drug delivery

In this study, for the first time, we have reported a sustained transdermal drug delivery from thermoresponsive poloxamer depots formed within the skin micropores following microneedle (MN) application. Firstly, we have investigated the sol–gel phase transition characteristics of poloxamers (PF®127, P108, and P87) at physiological conditions. Rheological measurements were evaluated to confirm the critical gelation temperature (CGT) of the poloxamer formulations with or without fluorescein sodium (FS), as a model drug, at various concentrations. Optimized poloxamer formulations were subjected to in vitro release studies using a vial method. Secondly, polymeric MNs were fabricated using laser-engineered silicone micromolds from various biocompatible polymeric blends of Gantrez S-97, PEG 10000, PEG200, PVP K32, and PVP K90. The MN arrays were characterized for mechanical strength, insertion force determination, in situ dissolution kinetics, moisture content, and penetration depth. The optimized MN arrays with good mechanical strength and non-soluble nature were used to create micropores in the neonatal porcine skin. Microporation in neonatal porcine skin was confirmed by dye-binding study, skin integrity assessment, and histology study. Finally, the in vitro delivery of FS from optimized poloxamer formulations was conducted across non-porated vs microporated skin samples using vertical Franz diffusion cells. Results concluded that permeation of FS was sustained for 96 h across the MN-treated skin samples containing in situ forming depot poloxamer formulations compared to non-microporated skin which sustained the FS delivery for 72 h. Confocal microscopic images confirmed the distribution of higher florescence intensity of FS in skin tissues after permeation study in case of MN-treated skin samples vs intact skin samples.