Critical Current Research Articles

Observation of competing interactions and field-induced ferromagnetism in noncentrosymmetric cubic Nd3Te4 lattice

Unconventional magnetism is key to advancement in a variety of spintronic applications and thus needs to be explored in new materials. Here, we report the in-depth magnetic studies of noncentrosymmetric Nd3Te4 and findings support the existence of Dzyaloshinskii-Moriya interaction in addition to symmetric exchange interaction among the moments. The large magnetic irreversibility with negative magnetization in M(T) data and associated first-order magnetic transition in isothermal magnetization data suggest the competing interactions resulting in multiple magnetic phases. The gradual evolution of magnetic texture has been probed by changes in the magnetization entropy having interesting characteristics like the inverse magnetocaloric effect. Most importantly, we have probed the existing nontrivial magnetic phase under a low applied magnetic field by ac-χ(T, H) and dc magnetization (M − H) data, having the same critical field in both measurements. The existence of multiple magnetic phases which are interconnected through first-order field-induced magnetic phase transitions have been probed at low field. The transition from paramagnetic to field-induced state for larger applied fields follows a second-order.

Comprehensive Evaluation of Machine Learning and ANN Models for Breast Cancer Detection

Breast cancer is one of the most prevalent forms of cancer among women, and early diagnosis is of vital importance. In recent years, machine learning algorithms have demonstrated high accuracy in breast cancer detection, contributing to earlier diagnoses. Various machine learning models can analyze tumor characteristics and assist in cancer identification and treatment decisions. This project aims to comprehensively examine the performance of 14 different machine learning algorithms and a custom-developed Artificial Neural Network (ANN) model in breast cancer detection, using public Wisconsin dataset. Following data preprocessing, the training and testing stages are carried out, and the results are thoroughly analyzed to determine the model with the highest accuracy. The findings of this project will showcase the potential impact of machine learning algorithms in the clinical applications of breast cancer detection, as researchers and healthcare providers can leverage these advanced computational techniques to enhance the accuracy and efficiency of breast cancer diagnosis, ultimately leading to improved patient outcomes and the advancement of this critical field of oncology.

An expeditious calculation approach to consider the influence of power frequency voltage on the calculation of the lightning performance of transmission lines: Validation for different peak current-front time correlation expressions and cumulative peak current distributions

The approach to consider the influence of the power-frequency voltage on the calculated lightning performance of transmission lines with voltage level from 69 kV to 500 kV by means of the 0.88-multiplying-factor applied on critical currents is validated for simulation conditions that assume the correlation between lightning peak current and front time, and several cumulative peak current distributions of negative first strokes. The obtained results confirm that the relation between critical currents calculated in the presence and in the absence of the power-frequency voltage follows the 0.88-factor for all investigated cases. The root mean square errors (RMSE) calculated for the critical currents vary from 3.20 kA to 7.37 kA and for the backflashover probability are not greater than 0.02 %, ensuring the generality of application of the proposed approach. The ratio between the backflashover rates obtained by the 0.88-factor approach and by the Monte Carlo method is around 1 for most of the simulated cases, confirming the quality of the results provided by such expeditious procedure.

AC loss calculation of no-electrical-insulation HTS magnets using a field-circuit coupling method

Abstract No-electrical-insulation (NEI) magnets are gradually exhibiting significant appeal due to their robust thermal stability and elevated mechanical strength. However, when exposed to AC conditions, these magnets will suffer more significant AC losses in dynamic electromagnetic devices, such as motors and maglev systems. Presently, the numerical methods for predicting the electromagnetic and loss behavior of large-scale NEI magnets entail high computation costs due to the substantial degrees of freedom or complicated modeling strategies. Thus, we propose a fully finite element method, referred to as the field-circuit coupling method, to efficiently assess the overall behavior of NEI magnets while preserving adequate accuracy. This method couples the T-A formula and the single-turn equivalent circuit through a global voltage, to avoid the costly and complicated inductance calculations, and to simultaneously consider the induced current. By further integrating the homogenization method, the calculation speed can be increased up to ten times. Additionally, we study the critical current, and the electromagnetic and loss behavior of the NEI magnets based on the proposed model. We identify some measurement methods that offer more precise estimations of the critical current and the turn-to-turn contact resistance of NEI magnets. Meanwhile, the results indicate the severe impact of high AC fields on the losses, and emphasize the importance of a reliable shielding structure for operational safety. Finally, the influence of turn-to-turn contact resistivity on the loss behavior is also investigated, which can provide valuable insights for the design of NEI magnets in dynamic electromagnetic devices.

Effects of K excess in microstructure of (Ba0.6K0.4)Fe2As2 superconducting powders

Abstract Iron-based superconductors (IBSs) are promising for high-field applications due to their exceptional characteristics, like ultrahigh upper critical field and minimal electromagnetic anisotropy. Creating multifilamentary superconducting wires with elevated transport critical current density is essential for practical use. The Powder in Tube (PIT) technique is commonly used for this purpose, but achieving optimal results requires careful exploration of powder microstructural properties. This is particularly crucial for superconductors like (Ba,K)122, the IBS most promising from an applicative point of view, where factors such as reactivity, volatility, and toxicity of constituent elements affect phase formation. Potassium volatility often leads to nonstoichiometric conditions, introducing excess potassium in the formulation. This study focuses on the impact of potassium excess δ on the microstructural properties of the ‘optimally doped’ (Ba0.6K0.4+δ )Fe2As2 phase (0 ⩽ δ ⩽ 0.08). Using techniques like Scanning Electron Microscopy, x-ray diffraction, and temperature-dependent magnetization measurements, we demonstrate the ability to produce nearly pure powders of the superconducting phase with controlled grain size. Our findings are relevant for PIT wire fabrication, where grain size strongly affects mechanical deformation. Grain size also influences transport properties, as observed in previous studies, where reducing grain size enhanced current-carrying capability at high magnetic fields.

Tracing the Evolution: A Comprehensive Bibliometric Analysis of Drug Interaction Clinical Studies.

This study aims to meticulously map the bibliometric landscape of drug-drug interactions (DDIs) in clinical research. This represents the first use of bibliometric analysis to comprehensively highlight the evolutionary trends and core themes in this critical field of pharmacology. An exhaustive bibliometric search was performed within the Web of Science Core Collection, aiming to comprehensively gather literature on DDIs in clinical settings. A combination of sophisticated analytical tools including DIKW, VOSviewer, and Citespace was utilized for an in-depth exploration of bibliometric patterns and trends. Of the 3421 initially identified articles, 2622 were considered relevant. The analysis revealed a marked escalation in DDIs publications, with a peak observed in 2020. Five principal thematic clusters emerged: Safety and Adverse Reactions, Drug Metabolism and Efficacy, Disease and Drug Treatment, Research Methods and Practices, and Special Populations and Combined Medication. Key insights included the escalating significance of drug metabolism in pharmacokinetics, heightened focus on cardiovascular and antiviral therapeutics, and the advancing frontier of personalized medicine. Additionally, the analysis underscored the necessity for strategic attention to vulnerable populations and innovative methodological approaches. This study calls for the global harmonization of research methods in DDIs clinical investigations, advocating for the integration of personalized medicine paradigms and the implementation of cutting-edge computational analytics. It highlights the imperative for inclusive and collaborative research approaches to adeptly address the intricate challenges of contemporary pharmacotherapy.

Broad temperature range ferrielectric liquid crystal: Temperature dependencies of dielectric and electro-optical properties

Broad temperature range ferrielectric liquid crystal mixture FerriLCM-1 was previously developed in 2022 (Pozhidaev et al. 2022). In that work dielectric and electro-optical properties of the mixture were studied at room temperature. Electrically induced birefringence index reached 0.01 at a wavelength of 532 nm with response times of 300 μs. In this paper we continue the FerriLCM-1 properties investigation in a wide temperature range from the room ones till the isotropic phase transition temperature. It is found that one of the critical electric fields is almost temperature independent, while the Kerr coefficient of quadratic electro-optical effect in deformed helix ferroelectric (DHF) mode grows with temperature increase. This leads to an increase in the depth of phase modulation. Another critical electric field decreases smoothly with temperature rising. At 47–50 °C two critical electric fields merge, while temperature dependencies of all other dielectric and electro-optical parameters of the mixture are continuous and smooth functions. At about 50 °C the maximum electrically induced birefringence in DHF-mode is ΔneffE=0.022 under the applied electric field E=0.4 V/μm and with 80 μs response time. FerriLCM-1 mixture operating in the DHF-mode exhibits a giant Kerr coefficient of 1700 nm/V2 (or even up to 2900 nm/V2 at λ=400nm) at the temperature of 85 °C combined with a 50 μs response time. This is the highest value of Kkerr coefficient among liquid crystals. All these properties make ferrielectric liquid crystal mixture FerriLCM-1 suitable for solving various problems of phase modulation of light and use in low-voltage devices.

Dynamic flexoelectric instabilities in nematic liquid crystals.

Electrohydrodynamic phenomena in liquid crystals constitute an old but still very active research area. The reason is that these phenomena play the key role in various applications of liquid crystals and due to the general interest of the physical community in out-of-equilibrium systems. Nematic liquid crystals (NLCs) are ideally representative for such investigations. Our article aims to study theoretically the linear NLCs dynamics. We include into consideration orientation elastic energy, hydrodynamic motion, external alternating electric field, electric conductivity, and flexoelectric polarization. We analyze the linear stability of the NLC film, determining dynamics of perturbations with respect to the homogeneous initial state of the NLC. For the purpose we compute eigenvalues of the evolution matrix for a period of the external alternating electric field. These eigenvalues determine the amplification factors for the modes during the period. The instability occurs when the principal eigenvalue of the evolution matrix becomes unity by its absolute value. The condition determines the threshold (critical field) for the instability of the uniform state. It turns out that one might expect various types of the instability, only partially known and investigated in the literature. Particularly, we find that the flexoelectric instability may lead to two-dimensionally space-modulated patterns exhibiting time oscillations. This type of the structures was somehow overlooked in the previous works. We formulate conditions needed for the scenario to be realized. We hope that the results of our work will open the door to a broad range of further studies. Of especial importance would be a comprehensive understanding of the role of various material parameters and nonlinear effects which is a key step for the rational design of NLCs exhibiting the predicted in this publication multidimensional oscillating in time patterns.

Ensuring Cybersecurity in the Modern World: Challenges from Artificial Intelligence-Based Fraud Posing a Threat to the Environment

Cybersecurity in the modern world is a critical field that involves protecting systems, networks, and programs from digital attacks. With advancements in technology, artificial intelligence (AI) has become a double-edged sword. While AI can enhance cybersecurity measures, it also introduces new vulnerabilities. Fraudulent activities facilitated by AI not only pose risks to financial and data security but increasingly threaten environmental sustainability as well. The purpose of the article is to identify ways to ensure cybersecurity. The object of the study is challenges from fraud using artificial intelligence technologies that threaten the environment. The research methodology involves the use of modern IDEF0 modeling methods. As a result of the study, a model for ensuring cybersecurity is presented.

The role of interfacial Dzyaloshinskii–Moriya interaction in different heavy metal-based perpendicular magnetic systems and its application in spintronic devices

The interfacial Dzyaloshinskii–Moriya interaction (DMI) acting as an essential source to stabilize spin textures in ferromagnetic ultrathin films has revealed its significant role in spin–orbit torque (SOT)-driven magnetic switching. Based on a convincing homochiral Néel domain wall model, the in-plane (IP) magnetic field associated with the DMI effect has been confirmed as an essential prerequisite for deterministic SOT-driven switching. Although the presence of the IP field is required, the impact of IP field magnitude combined with the DMI effect on SOT-driven switching in different heavy metals (HMs) has never been considered together. In this research, SOT-induced switching under various IP fields in Pt, W, or Ta/CoFeB/MgO systems has been studied. The results show that the critical threshold current IC is almost independent of the IP field in the Pt-based structure; however, it significantly decreases with an increase in the IP field in the W- and Ta-based systems. Combining the derived DMI field and the magnetic domain nucleation, it is concluded that the significant difference in DMI fields and the domains' nucleating positions are the main reasons for the above phenomenon. Exploiting the distinct dependent properties of IC on the IP field, a six resistance state multilevel storage and five programmable spin logic gates are proposed and realized. This study provides insight into the special ability of the SOT effect modulated by the DMI, and also expands an effective way to construct spin-based devices based on this unique spintronic effect.

Investigating the effect of rolling deformation on the electro-mechanical limits of Nb3Sn wires produced by RRP® and PIT technologies

Future high-field magnets for particle accelerators hinge on the crucial development of advanced Nb3Sn wires engineered to withstand the large stresses generated during magnet assembly and operation. The superconducting properties of Nb3Sn enable the design of compact accelerator-quality magnets above 10 T, but at the same time the brittleness and strain sensitivity of the material impose careful consideration of the mechanical limits. In addition, accelerator magnets are wound using Rutherford cables and the cabling process generates deformations in the wire that can affect its electro-mechanical performance. This paper reports on the impact of the rolling deformation on the transverse stress tolerance of high-performance restacked-rod-process (RRP®) and powder-in-tube (PIT) Nb3Sn wires. Rolling deformation was used to mimic the effect of cabling on the wire shape. Deformed samples were compared to reference round wires in term of stress dependence and irreversible limit (σ irr) of the critical current (I c) under transverse compressive loads up to 240 MPa. Experiments were performed at 4.2 K, 19 T, on resin-impregnated single wires that imitate the operating conditions in a Rutherford cable of an accelerator magnet. The results show that rolling deformation has a detrimental effect on the initial I c of PIT wires, but it does not influence the behavior of the wire under stresses above 70 MPa. On the other hand, the deformation of RRP® wires leads to an improved σ irr without affecting the initial I c. Additionally, a 2D-mechanical finite element method model of the RRP® wire was developed to investigate the impact of the wire geometry on the plastic deformation of the copper matrix, which induces residual stresses on Nb3Sn and is the main cause for the permanent reduction of I c. Based on the model results, an alternative layout of the wire was proposed that improves its stress tolerance without affecting its electrical transport properties.

Superconducting Properties of Layered Chalocogenides 1T$1T$‐RhSeTe

AbstractPlatinum‐group transition‐metal dichalcogenides have emerged as a subject of considerable interest in condensed matter physics because of their remarkable topological properties and unconventional superconducting behavior. In this study, the synthesis and superconducting characteristics of a layered chalcogenide RhSeTe crystallized in the 1‐structure, known for hosting materials with nontrivial topology characteristics are reported. RhSeTe exhibits type‐II superconductivity, with a superconducting transition temperature of 4.72 K and a high upper critical field 4.06(7) T.

Synthesis and Properties of 12442-family Superconductor

We report a synthesis of two members of recently discovered high-temperature superconductors of 12442 family, with formula MCa2Fe4As4F2 (M=Rb, K) and transition temperatures of 32.7 and 34.6 K, respectively. Quality of the samples was assessed using X-ray powder diffraction, superconducting transitions were identified through transport and magnetic experiments. The temperature dependence of the upper critical field and vortex activation energy was investigated under magnetic fields up to 19 T. Two distinct thermally activated flux flow regimes were observed in both systems. Field dependences of activation energy U0(H) indicate a change in the properties of vortex matter in these regimes and distinctly different dissipation mechanisms, reminiscent of cuprate HTSC.

Effect of heating and bending on localized critical current in 2G HTS tapes with non-contact trapped field measurements

Current-voltage measurement (I–V curve) is a typical method to identify the critical current (Ic) of second-generation high-temperature superconducting tapes (2G HTS tapes). However, it is difficult to characterize the local Ic of 2G HTS tape on the millimeter (mm) scale due to the set spacing of the voltage electrodes (several centimeters), so non-contact trapped field distribution measurements have been used to define local defects in Y–Ba–Cu–O bulks and 2G HTS tapes, especially for the quality analysis for long lengths of 2G HTS tapes. In order to discuss the possible degradation of 2G HTS tape during heating and bending (both important parameters in joining process), this study used both trapped field measurement and I–V measurement to characterize the effect of heating (190 °C–230 °C) and bending (radius = 3.75 mm–22.35 mm) processes on the degradation of 2G HTS tape Ic. In addition, according to electromagnetic calculations, the local Ic (within a few millimeters) of the 2G HTS tape can be obtained from the flux density and distribution of the trapped magnetic field. Comparing the two sets of Ic measurements showed very good agreement. This study demonstrates the accuracy of optimized heating and bending parameters as well as spatial position and local Ic values of processed 2G HTS tape through non-contact trapped field measurements.

Superconductivity, antiferromagnetism, and charge density waves in ZrTe3 intercalated with Terbium

The uniaxial compound ZrTe3 displays a complex charge density wave (CDW) ground state below ≈ 63 K. Here we report that Tb intercalated ZrTe3 single crystals display superconductivity with Tc ≈ 5.4 K. The effect of the Tb additions to the superconducting properties, magnetism, and CDW are probed by means of measurements of electrical resistivity (ρ), thermoelectric potential (S), and Hall effect. The temperature dependence of the upper critical field (Hc2) could be fit with a two-band model. The magnetic susceptibility measurements suggest that upon the addition of Tb an antiferromagnetic order is developed with ordering temperature of TN ≈ 4.0 K. Tb doping's enhancing effect on Tc suggests promising paths for future research involving lanthanide dopants in transition metal tellurides.

(Invited) Wide Bandgap Semiconductor Homo- and Hetero-P-N Junctions

Wide bandgap (WBG) semiconductors, such as gallium nitride (GaN), gallium oxide (Ga2O3), aluminum nitride (AlN), and diamond, hold immense promise for power electronics applications by drastically reducing power loss, enhancing switching frequency, and reducing system volume. However, effective doping (p-type or n-type) remains a substantial challenge for these materials, given that the p-n junction is a fundamental building block for device design. Selective-area doping, crucial for high-performance electronic devices and integrated circuits, poses another significant obstacle.We report recent progress on selective-area doping for GaN homo-p-n junctions. Although GaN shows substantial development in both p-type and n-type doping, achieving selective doping, especially p-type, remains challenging through techniques such as ion implantation, diffusion, or in-situ doping. Our investigation delves into the challenges of p-GaN regrowth using metal-organic chemical vapor deposition (MOCVD). Interface contaminants post etching and regrowth, such as silicon (Si), carbon (C), and oxygen (O), have been systematically investigated. An optimized interface treatment has been identified to effectively reduce surface charge and, consequently, reverse leakage current to the level comparable to the as-grown p-n junction. Additionally, a novel hydrogen plasma treatment has been proposed to realize selective doping for GaN, successfully applied to p-GaN gated high electron mobility transistors (HEMTs) to improve the dynamic performance by avoiding the etching damage and edge termination for vertical GaN p-n diodes to realize high breakdown voltage.β-Ga2O3 has emerged as a standout in power electronics applications, surpassing Si (3000×), SiC (10×), and GaN (4×) in Baliga’s figure of merit. Its great potential for mass production, facilitated by the availability of high-quality and large-size wafers, significantly enhances its attractiveness. However, challenges, including the absence of p-type doping due to deep acceptor states and a flat valence band, as well as exceptionally low thermal conductivity, limit its performance at high power and temperatures. Overcoming these challenges necessitates hetero-integration with semiconductors possessing p-type characteristics and high thermal conductivity. P-type diamond stands out due to its exceptional thermal conductivity, high critical breakdown field, and well-established p-type characteristics. Moreover, since the n-type doping of diamond also poses challenges, fusing the p-type diamond and n-type Ga2O3 to create a diamond/Ga2O3 p-n-heterojunction can effectively overcome doping bottlenecks for both materials. Our successful construction of a diamond/β-Ga2O3 hetero-p-n junction through the mechanical integration of bulk p-type diamond and bulk n-type Ga2O3 presents robust electrical performance up to 125 ℃, with hysteresis lower than 0.7 V @ 1 μA. Impressively, the ideality factor of the p-n junction is remarkably low at 1.28, and the rectification ratio exceeds 108. This approach has also been applied to other hetero-p-n junctions, such as the diamond/GaN structure, demonstrating consistent robust performance. These findings underscore the significant potential of the mechanical integration approach, offering a promising avenue to simplify the fabrication process and facilitate the widespread application of WBG heterojunctions.

From Farm to Fork: Enhancing Agricultural and Food Safety Monitoring with Laser-Engineered Graphene Sensors

In the critical fields of precision agriculture and food safety, the demand for accurate and sensitive monitoring tools for fertilizers, pesticides, and food-borne pathogens cannot be overstated. Our collaborative research with commercial entities seeks to overcome the challenges faced by current electrochemical ion-selective, enzymatic, and immunosensors, which often fall short in selectivity, stability, and sensitivity, particularly under field conditions. We showcase the tunable properties of Laser-Induced Graphene (LIG) – such as surface wettability, roughness/area, and electrical conductivity – and their instrumental role in enhancing the commercial viability of these sensor technologies.We demonstrate the conversion of hydrophilic Laser-Induced Graphene (LIG) to a near-superhydrophobic state using an innovative dual-laser process in ambient conditions. This method intricately sculpts the surface into micro and nanoscale structures reminiscent of a lotus leaf, resulting in nearly superhydrophobic characteristics. By modifying the laser's power, speed, and fluence, we can also fine-tune the electroactive surface area and electrical conductivity, significantly impacting sensor functionality. For solid contact ion-selective electrodes (SC-ISEs), enhancing the LIG surface with high hydrophobicity prevents water layer accumulation at the ion-selective membrane and electrode interface. This design expels water from within the membrane, fosters stronger membrane-electrode adhesion, and consequently, diminishes signal interference. Such improvements are instrumental in boosting the sensor's accuracy and extending its operational lifespan. In contrast, a hydrophilic LIG with a large surface area enhances catalytic efficiency and allows more biorecognition agents to adhere to its surface, thereby amplifying the sensitivity of enzymatic pesticide sensors. Lastly, a flat, hydrophilic LIG surface ensures an even distribution of antibodies, which enhances the performance of sensors detecting foodborne pathogens.These modifications to LIG and the resulting sensors have substantial commercial potential. We have developed ions sensors for nitrate, ammonium, potassium, calcium, and magnesium have demonstrated near-Nernstian sensitivities, extensive sensing ranges across four orders of magnitude, and the ability to detect concentrations as low as 1 ppm in soil and water samples. These sensors are currently being integrated into commercial soil moisture and temperature probes for monitoring in farm fields. The pesticide sensing capability of the sensor can reach an extremely low picomolar detect limit for organophosphates, the nanomolar regime for neonicotinoids, and micromolar regime for glyphosate in surface waters. These sensors are currently being interfaced with LIG-based mist/fog harvesting devices to monitor pesticide and spray drift in farm fields. Finally, the LIG-based Salmonella sensors are capable of monitoring bacteria such as Salmonella to about 10 CFU/mL in actual food matrices such as chicken broth without the need for sample preconcentration or costly lab analyses.This research forges innovative avenues in agriculture and food safety monitoring, laying the groundwork for mass production of efficient and economical sensors. We believe this technology will revolutionize field monitoring, significantly advancing sustainable agriculture and improving public health safety. Figure 1

Pressure-Sensitive Multiple Superconducting Phases and Their Structural Origin in Van der Waals HfS_{2} Up to 160GPa.

Superconductivity has been observed in many insulating transition metal dichalcogenides (TMDCs) under pressure. However, the origin of superconductivity remains elusive due to the lack of studies on their structures at low temperatures. Here, we report the observation of a high-T_{c} superconducting state (SC-I phase) coexisting with other superconducting states in a compressed 1T-HfS_{2} crystal up to approximately 160GPa. Insitu synchrotron x-ray diffraction results exclude the presence of decomposed sulfur and confirm two structural phase transitions at room temperature, as well as an additional transition at low temperature, which contribute to the emergence of multiple superconducting states. The SC-I phase exhibits an unsaturated T_{c} of 16.4K at 158GPa, and demonstrates the highest upper critical field among the bulk TMDCs, μ_{0}H_{c2}(0)≈29.7 T for a T_{c}∼15.2 K at 147GPa, exceeding the weak-coupling Pauli limit. These results reveal abundant SC properties together with sensitive structures in compressed HfS_{2}, and thereby extend our understanding on TMDCs' superconductivity.

Multiphase superconductivity at the interface between ultrathin FeTe islands and Bi2Te3

FeTe monolayer islands situated on a topological insulator Bi2Te3 (0001) surface were recently reported to exhibit the opening of an energy gap below temperatures T ~ 6 K, which could be due to a superconducting phase transition. In this work, we present a magnetic field dependent transport study proving that this gap is indeed of superconducting origin. Upon cooling, several drops in resistance are observed in the temperature range between 6 K and 2 K, indicating multiple transitions. Using the Ginzburg-Landau theory, we show that the critical magnetic field of the dominant high-temperature transition at ~ 6 K is governed by orbital Cooper pair breaking in larger FeTe islands, large enough to exceed the superconductive coherence length ξ\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$\\xi$$\\end{document}. At smaller island sizes, transitions at lower temperatures < 6 K become more prominent, showing significantly increased critical fields dominated by paramagnetic pair breaking. The multiphase superconducting behaviour is in line with an observed wide distribution of FeTe islands width 5–100 nm and seems to reflect disorder effects at the interface to Bi2Te3. The proof of local superconductivity makes the FeTe interface to the topological insulator Bi2Te3 substrate a potential host of topological superconductivity.

A novel numerical approach for analyzing experimental data on critical current degradation in Nb3Sn wires caused by transverse deformations preceding heat treatment

In the framework of studies on high-field magnets for future accelerators, a specific project called ASTRACT focuses on the effect of transverse strain on the critical current of Nb3Sn wires. The first phase of the project addresses the effects of strain imposed on Nb3Sn wires before heat treatment and the development of a procedure to directly compare critical current measurements with values extracted from magnetization cycles. A Nb3Sn RRP-Ti wire was deformed to different values of transverse strain (10%, 15%, 20%, and 25%), and long samples were collected for transport measurements at 4.2 K, in a background field ranging from 10 to 14 T. Short samples were used for magnetization measurements (VSM technique). Additionally, SEM images of the cross-section were collected at different longitudinal positions along the wire for each strain value. This paper proposes a method based on SEM image analysis and magnetization measurements analysis to study the effect of bundle deformation on transport properties. The procedure requires morphological information provided by SEM images after appropriate numerical processing. Verification through statistical comparison between the Ic transport and VSM data is also conducted. Direct critical current measurements showed no degradation due to deformation up to 25%. The method introduced, independent of transport data, can reach the same conclusions by considering the real shape of the bundles.