Cretaceous Accretionary Complex Research Articles

Metamorphic Ages of the Jurassic Accretionary Complexes in the Kanto Mountains, Central Japan, Determined by K–Ar Dating of Illite: Implications for the Tectonic Relationship between the Chichibu and Sanbagawa Belts

To determine the metamorphic ages of the accretionary complexes in the Northern Chichibu Belt in SW Japan, K–Ar dating was conducted using weakly metamorphosed sedimentary rocks collected from the Kanto Mountains, Central Japan. Whole-rock ages were obtained for chert and red shale samples, and the mineral ages of fine-grained illite with a grain size of less than 4 μm were obtained for chert, red shale, mudstone, acidic tuff, and basic tuff. The K–Ar ages of chert and red shale presented large variations, with systematically older ages compared to those of mudstone and tuff in the same strata. The influence of submarine hydrothermal activities on chert and red shale before subduction is a possible cause of this deviation. The illite samples, which were fractionated into four grain-size classes using a suspension method, yielded older ages and higher illite crystallinity (i.e., smaller values of Kübler’s crystallinity index) for larger grain-size classes. The peak metamorphic ages were determined from the K–Ar ages of the 3–4 μm class illite in mudstone and tuff. The Late Jurassic to the Earliest Cretaceous accretionary complex of the lowest structural unit (Kashiwagi Unit) was dated within a small range between 117–110 Ma, which is distinctly older than the K–Ar ages of white mica reported from the Sanbagawa Belt. The peak metamorphic age of acidic tuff (113 Ma) at the type locality of the Mikabu Greenstones indicates that the subducted Mikabu seamount is a constituent of the Kashiwagi Unit. The peak metamorphic ages of the Manba and Kamiyoshida Units were obtained as 132–107 Ma and 163–144 Ma, respectively. Major structural discontinuity is suggested within the Middle Jurassic accretionary complexes.

Meta-bauxite deposit in the Tavşanlı Zone, NW Turkey: A new locality for gem-quality diaspore formation

The tectonic units of Sakarya Zone (Pontides) and Tavşanlı Zone (Anatolides) are exposed in the Mihalıççık area of central Anatolia. A Cretaceous accretionary complex that forms the İzmir-Ankara-Erzincan suture zone separates the units. Within this region, the Tavşanlı Zone is made up of a coherent series and tectonically overlying late Cretaceous mélange, which has undergone blueschist facies metamorphism. Coherent series consist of strongly retrogressed schists and conformably overlying platform-type thick marbles, known as the İnönü marbles.The İnönü marbles contain meta-bauxite lenses in the lower levels, which can be classified as karstic bauxites deposited in the karst holes within the original limestone. Considering the general stratigraphy of the Tavşanlı Zone, a middle Jurassic age can be envisaged for the bauxite formation. Geochemical data suggest that the bauxites were largely derived from redeposited argillic sediments, with minor and variable inputs from the weathering of intermediate to acidic rock. The mineral assemblage of the meta-bauxite consists of diaspore, chloritoid, muscovite, paragonite, Al-spinel (hercynite), magnetite, hematite and ilmenite. In addition, apatite, rutile, monazite, xenotime and zircon occur as accessory minerals. Limonite, goethite, akaganeite and kaolinite also formed during the latest stage of alteration. P-T conditions for the meta-bauxites are estimated as 20–27 kbar and 330–470 °C that are indicative of formation under high-P / low-T blueschist facies conditions.The meta-bauxites are cut by veins of diaspore, muscovite-paragonite, goethite, calcite and ankerite, and include gem-quality diaspore crystals up to 6 cm long. Textural evidence indicates that the diaspore formation is related to the extraction of aluminium from the meta-bauxite body and migration of Al-rich fluids into the shear zones during the last stage of the high-P metamorphism. During exhumation of the Tavşanlı Zone, these veins were brecciated by brittle deformation and the fractured minerals were cemented by granoblastic calcite and ankerite during the latest stage of the vein formation.

Provenance analysis of Cenozoic conglomerates: Insights from Lower Cretaceous radiolarians in chert clasts from the Xigaze area, southern Tibet

Conglomerates, exposed on either side of the Yarlung Tsangpo suture zone (YTSZ) in southern Tibet, have attracted wide attention in elucidating uplift and erosion histories of the Himalayan-Tibetan orogen. However, the provenance of these conglomerates remains controversial. Although radiolarian-bearing chert clasts within these conglomerates have received little focus, identification of the radiolarian assemblages they contain could shed light on the provenance of these sedimentary units. We present the first report of Upper Jurassic to Lower Cretaceous (upper Kimmeridgian–lower Barremian) radiolarian assemblages recovered from chert clasts within the Liuqu and Gangrinboche conglomerates in the Xigaze area. To extract radiolarian fossils from independent clasts in the conglomerates, a detailed and efficient experimental process is illustrated. The assemblages are well correlated to those in the YTSZ and Tethyan Himalaya, showing typical Tethyan characteristics. The lithology of chert clasts and ages of constituent radiolarian faunas suggest that the chert clasts in Liuqu and Gangrinboche conglomerates were derived from the Bainang terrane. This interpretation implies that Early Cretaceous accretionary complexes in the YTSZ had been exposed and eroded before deposited as clasts in the Cenozoic Liuqu and Gangrinboche conglomerates.

Provenance of Late Cretaceous accretionary complex within the Yarlung–Zangpo suture zone, Bainang, southern Tibet: Implications for the subduction–accretion of the Neo-Tethyan ocean

Accretionary complexes offer important source of information for studying the subduction history and source-to-sink system and neighboring terranes. In this study, we conducted field mapping, detrital zircon U–Pb age and trace element analyses, and electronic microprobe composition analysis of detrital Cr-spinel in sandstones from the Cretaceous Bainang accretionary complex in the central part of the Yarlung–Zangpo suture zone (YZSZ). The Bainang accretionary complex is located in a structural window that is mainly composed of Xigaze ophiolite, Late Triassic–Early Cretaceous radiolarite chert with a Late Cretaceous hemipelagic siliceous shale matrix, and Late Cretaceous sandstone. The obtained detrital zircon geochronological dataset confirms two spectra. Detrital zircons from the Canggasaba and Lianxiang sections are dominated by Precambrian grains with subordinate numbers of Mesozoic grains clustering at 243–178, 164–117, and 109–91 Ma, consistent with the mélange and trench-fill Rongmawa Formation, and all the trace elements of the Mesozoic grains match continental arc affinity. Provenance analysis suggests that detritus in these sections was mainly derived from the eastern part of the Gangdese arc and the central–northern Lhasa terrane. These results confirm the existence of the ancestral Lhasa River that transports sediments from the eastern Lhasa terrane to the subduction zone and further westward along the east–west axial system parallel to the trench. Conversely, the Qiajiu section is mainly dominated by Mesozoic detrital zircon grains, representing submarine fan deposits that were sourced from the adjacent Gangdese arc and transported through a local north–south-flowing river system. Detrital Cr-spinel compositions and detrital zircon trace elements from the Qiajiu section also revealed the contribution of ophiolites. Considering the abundance of Eurasia-affinity detrital zircons, this study supports the single subduction model that was developed along the southern margin of the Lhasa terrane.

Early cretaceous accretionary complex of the valaisan ocean, western alps?

Based on detailed field investigations and structural mapping in the Petit-Saint Bernard Pass area (French-Italian border), the Versoyen Complex is newly defined as an imbrication of four structural units. The first one is composed of the remnant of the Valaisan ocean floor (“basalt” and “black schist” formation) and the other three units -grouped under the name of “schistes a blocs”- contain blocks with different origin: oceanic, continental or a mix of both, embedded in a matrix of grey micaschists. Kinematic analysis highlights the compressional style of this complex with a well-developed stack of tectonic slivers. Rocks in the tectonic melange include Paleozoic green gneiss and grey-green micaschists blocks, together with Upper Paleozoic granitoid and layered gabbro, which display a typical orogenic calc-alkaline signature, comparable to that of coeval plutonic rocks of the Brianconnais continental basement attributed to a late Variscan back-arc environment. A new isotopic dating on a calc-alkaline layered gabbro block gave a U/Pb zircon age of 310 ± 4 Ma, in the range of other dated plutonic rocks such as the Punta Rossa and Aiguille du Clapet megablocks. These Paleozoic continental basement rocks of the Versoyen Complex were initially rift allochthons, but are now outcropping as a tectonic melange, with imbricated blocks and slivers within an Early Cretaceous grey micaschists matrix. Radiolarians sampled by Beltrando et al. (2012) within the grey micaschists have been attributed to the Late Jurassic - Early Cretaceous. Additional stratigraphic and geodynamic constraints allow us to restrict the deposition of the Versoyen sediments from the Aptian to Cenomanian times. The Versoyen Complex is unconformably overlain by the Valaisan Trilogy (Aroley-Marmontains-Saint Christophe) of Cretaceous age. The Turonian Aroley strata deposited on the Versoyen “schistes a blocs” units and the absence of any Aroley limestones within the underlying tectonic melange testify a clear stratigraphic unconformity, mapped regionally, between the Versoyen Complex and Valaisan Trilogy. Both are affected by a high-pressure metamorphism related to the Alpine collision around 40 Ma and trace of former metamorphism are nowhere observed suggesting that the former melange did not result in a significant tectonic thickening. We interpret the Versoyen Complex, as a pre-Alpine Cretaceous subduction-related accretionary prism, formed during the closure of the Valaisan Ocean. Valaisan rifting initiated during the Late Jurassic, as a consequence of an eastwards propagation of the North-Atlantic rifting towards the Alpine region. This propagation followed pre-existing Variscan structures along the Zone Houillere, explaining the present marked differences between Variscan basements on each side of the Valaisan suture (External Crystalline Massifs and Brianconnais basement). Due to the southward subduction of the Valaisan Ocean, this passive margin was later on deformed through compressional shearing tectonics, developing a “schistes a blocs” fabric and imbricating the former rift allochthons. During the Tertiary Alpine collision, Versoyen and Valaisan Trilogy units were deeply underthrusted, and then exhumed under the Subbrianconnais units - including the Petit-Saint Bernard and Arguerey Liassic calcschists, which underthrusted in turn the Brianconnais Front.

Rock pillars shaped by columnar joints in granite at Mt. Mizugaki, Central Japan

AbstractRock pillars of granite form a special type of characteristic topography in granite, but their origin is not well understood, partly because their 3D morphology has never been well characterized. Rock pillars were investigated at Mt. Mizugaki, which is underlain by Neogene granite that intruded into the Cretaceous accretionary complex in central Japan. Three rock pillars and their surrounding areas were investigated in detail using unmanned aerial vehicle (UAV) images and structure from motion (SfM). The rock pillars were up to 70 m high and were shaped by columnar joints, which has hardly been reported before in granitic rocks. Columnar joints in granite are much larger than columnar joints in volcanic rocks. The columnar joints curved vertically, and some of them showed dipyramid shapes. The large size and curved morphology of the columnar joints may be the result of the slow cooling of the granite, compared to that of volcanic rocks. Thus, the columnar joints at Mt. Mizugaki made large, high rock pillars, which are not common in volcanic rocks.

Geochemical characteristics of a pre-Middle Jurassic oceanic crust fragment from the Central Pontides in northern Turkey: Geodynamic implications on intra-oceanic subduction initiation

The Central Pontides (northern Turkey) is one of the key localities to understand the geodynamic evolution of the Palaeo- and Neotethyan oceans. It consists of the pre-Jurassic basement units, the Early Jurassic and the Early Cretaceous accretionary complexes, the widespread Middle Jurassic continental arc magmatics and the Late Jurassic to Tertiary cover units. The Early Cretaceous accretionary complex is represented by the Central Pontide Structural Complex and includes the Middle Jurassic oceanic units, which were metamorphosed during the Early Cretaceous. Apart from these oceanic units, a few metaophiolite and serpentinite fragments have been recognized within the basement units, which may represent the remnants of an older ocean. The pre-Middle Jurassic Devrekani Metaophiolite is the largest oceanic fragment and tectonically intercalated within/between the Devrekani Metamorphics and the Çangaldağ Metamorphic Complex. It is mainly composed of harzburgites, dunites with chromite veins and metagabbros, and cut by metabasaltic andesites and metadacites. Petrographically, the gabbro consists mainly of plagioclase and clinopyroxene, and displays phaneritic/porphyritic texture. In contrast, the metabasaltic andesite includes plagioclase and mica phenocrysts within a fine-grained groundmass. Also, the metadacite is composed predominantly of quartz, plagioclase, and mica minerals. Two different magmatic groups belonging to completely different tectono-magmatic settings have been geochemically determined based on the immobile trace element systematics. The metadacites and metabasaltic andesites are akin to continental arc magmatics and characterized by negative Nb and Ta anomalies and depleted HFSE relative to Th and La contents. However, the metagabbro samples display the geochemical signatures of boninitic rocks and characterized by highly depletion in HFSEs and REEs relative to N-MORB. The Devrekani Metaophiolite in the Central Pontides may represent another remnant of pre-Middle Jurassic oceanic crust generation and can be north-eastward continuation of the Permian-aged Almacık complex and the Boğazköy Metaophiolite fragment in the western Sakarya Composite Terrane. It may have been cut by intrusions of the extensive Middle Jurassic continental arc magmatism after its imbrication within the basement unit. The presence of pre-Middle Jurassic oceanic units may indicate that the Paleozoic ocean may have survived as the Jurassic Intra-Pontide Ocean between the Scythian Platform and Sakarya Composite Terrane during the Mesozoic time. Thus, the Intra-Pontide Suture may normally include the Palaeozoic and Mesozoic remnants of the long-lived northward subducting Tethyan ocean.

Tokoro Belt (NE Hokkaido): an exhumed, Jurassic – Early Cretaceous seamount in the Late Cretaceous accretionary prism of northern Japan

AbstractThe Tokoro Belt exposed in NE Hokkaido (Japan) represents part of a Late Cretaceous accretionary complex, which includes variously metamorphosed volcanic rocks that are interbedded with chert, lenticular limestone and some fore-arc sedimentary rocks. The Tokoro Belt is notably different from other Late Cretaceous accretionary complexes around the Pacific Rim because of widespread occurrence of basalts and volcaniclastic rocks in it. The Nikoro Group, characterized by widespread occurrence of volcanic rocks, is divided into western, eastern and southern sections based on the internal structure, geochemical affinities and metamorphic grades of their volcanic lithologies. OIB (ocean island basalt)-type volcanic rocks with low-grade metamorphic overprint predominate in the western and southern sections, whereas MORB (mid-ocean ridge basalt)- and OIA (ocean island alkaline basalt)-type rocks in the eastern section with partly high-pressure metamorphism make up the northern part of the eastern section. Trace element patterns display transitional trends from MORB to OIA geochemical affinities. OIB-type rocks display trace element characteristics similar to those of shield volcano lavas on Hawaii, rather than small and mainly alkaline, Polynesian hotspot lavas; furthermore, they show significant HREE (heavy rare earth element) enrichment probably caused by plume–ridge interaction. Widespread OIBs in the Tokoro Belt represents tectonic slices of a large (>80 km wide) Hawaiian-style, seamount shield volcano on the Izanagi oceanic plate that was accreted into the continental margin of Far East Asia in the Late Cretaceous.

Detrital zircon U-Pb ages from the Cretaceous accretionary complexes in the Takaharagawa area, central Kii Peninsula

Detrital zircon U-Pb ages from the Cretaceous accretionary complexes in the Takaharagawa area, central Kii Peninsula

Tectonic setting required for the preservation of sedimentary mélanges in Palaeozoic and Mesozoic accretionary complexes of southwest Japan

The Palaeozoic to Mesozoic accretionary complexes of southwest Japan include various types of mélange. Most mélanges are polygenetic in origin, being sedimentary or diapiric mélanges that were overprinted by tectonic deformation during subduction. Sedimentary mélanges, without a tectonic overprint, are present in the Permian accretionary complexes of the Akiyoshi and Kurosegawa belts and in the Early Cretaceous accretionary complex of the Chichibu Belt. These mélanges are characterized by dominant basalt and limestone clasts, within a mudstone matrix. The basalt and limestone clasts within the sedimentary mélanges were derived from ancient seamounts. Subduction of a seamount results in deformation of the pre-existing accretionary wedge, and it is difficult to incorporate a seamount into an accretionary wedge; therefore, preservation of seamount fragments requires a special tectonic setting. Oceanic plateau accretion might play an important role in interrupting the processes of subduction and accretion during the formation of accretionary complexes. Especially the Mikabu oceanic plateau might have caused the cessation of accretion during the Early Cretaceous. The subduction and accretion of volcanic arcs and oceanic plateaux helps to preserve sedimentary mélanges from tectonic overprinting by preventing further subduction.

Blueschist facies overprint of late Triassic Tethyan oceanic crust in a subduction–accretion complex in north-central Anatolia, Turkey

The late Cretaceous accretionary complex along the İzmir–Ankara–Erzincan suture zone, northern Turkey, includes various types of metamorphic rock together with radiolarite, sandstone, mudstone, serpentinite, basalt and limestone. Meta-plagiogranite blocks (up to 5 m in diameter) and a meta-gabbro slice (800 × 500 m) cross-cut by meta-plagiogranite are observed in a matrix of serpentinite, mudstone and radiolarian chert. These meta-gabbros and meta-plagiogranites show subduction-related geochemical characteristics. Laser ablation inductively coupled plasma mass spectrometry U–Pb dating of zircons from two meta-plagiogranites yielded 222.3 ± 1.5 and 227.2 ± 1.6 Ma crystallization ages. This study shows that the meta-gabbro and meta-plagiogranite from the accretionary complex are remnants of the metamorphosed equivalents of the late Triassic lower crustal rocks of the subducted Tethyan oceanic crust. They are the oldest lower crustal rocks observed in the İzmir–Ankara–Erzincan suture zone. Both the meta-gabbros and meta-plagiogranites have Na–Ca amphiboles, indicating blueschist facies metamorphism. However, phengites from a blueschist facies rock yielded an 40 Ar/ 39 Ar age of 104.3 ± 0.7 Ma, indicating that blueschist metamorphism occurred during the Albian. All these data suggest that the oceanic crust formed during the Norian, metamorphosed during the Jurassic to early Cretaceous and then dismembered during accretionary complex formation in the late Cretaceous. Supplementary material: A complete description of the analytical methods ( electron microprobe, LA-ICP-MS zircon U–Pb and 40 Ar/ 39 Ar age analyses, pseudo-section modelling and THERMOCALC) are available at https://doi.org/10.6084/m9.figshare.6509984 Thematic collection: This article is part of the ‘Tethyan ophiolites and Tethyan seaways collection’ available at: https://www.lyellcollection.org/cc/tethyan-ophiolites-and-tethyan-seaways

Origin of the pleonaste-bearing mafic-ultramafic rocks from the Armutlu peninsula, NW Turkey

Al-rich spinels were rarely reported compared to Cr-spinels, which were mostly observed in ophiolitic rocks. Pleonaste [(Mg, Fe 2+ )Al 2 O 4 ], which is an Al-rich spinel, was observed in the ophiolitic mafic-ultramafic rocks tectonically located in the Early Cretaceous accretionary complex, at the eastern part of the Armutlu peninsula, NW Turkey. The ophiolitic mafic-ultramafic rocks have cumulate character, and most of them are represented by peridotite and pyroxenite. Pleonaste was observed in pyroxenites and gabbros of the ophiolitic rocks. Pyroxenites consist mainly of clinopyroxene + orthopyroxene + amphibole ± olivine + spinel. Gabbros are composed of clinopyroxene + orthopyroxene + amphibole + plagioclase + spinel. Pleonaste in these rocks lies parallel to the magmatic layers and is distinguished by its emerald greenish color under the microscope. Pleonastes have high Al 2 O 3 (59.65-62.24 wt.%) and low Cr 2 O 3 (0.05-1.32 wt.%) contents with Mg# and Fe 3+ # ranging from 54.23 to 59.77 and 3.83 to 4.28, respectively. Petrographical observations and the pressure?temperature (P-T) pseudosection modelling suggest that pleonaste in the mafic-ultramafic rocks from the study area crystallized during magmatic processes. Presence of amphibole and Ca-rich (An % 85-88) plagioclase in these rocks suggests that the ophiolitic rocks, located in the Early Cretaceous accretionary complex at the eastern part of Armutlu peninsula, formed from an arc-related hydrous magma source.

Subduction history of the Paleo-Pacific slab beneath Eurasian continent: Mesozoic-Paleogene magmatic records in Northeast Asia

This paper presents a review on the rock associations, geochemistry, and spatial distribution of Mesozoic-Paleogene igneous rocks in Northeast Asia. The record of magmatism is used to evaluate the spatial-temporal extent and influence of multiple tectonic regimes during the Mesozoic, as well as the onset and history of Paleo-Pacific slab subduction beneath Eurasian continent. Mesozoic-Paleogene magmatism at the continental margin of Northeast Asia can be subdivided into nine stages that took place in the Early-Middle Triassic, Late Triassic, Early Jurassic, Middle Jurassic, Late Jurassic, early Early Cretaceous, late Early Cretaceous, Late Cretaceous, and Paleogene, respectively. The Triassic magmatism is mainly composed of adakitic rocks, bimodal rocks, alkaline igneous rocks, and A-type granites and rhyolites that formed in syn-collisional to post-collisional extensional settings related to the final closure of the Paleo-Asian Ocean. However, Triassic calc-alkaline igneous rocks in the Erguna-Xing’an massifs were associated with the southward subduction of the Mongol-Okhotsk oceanic slab. A passive continental margin setting existed in Northeast Asia during the Triassic. Early Jurassic calc-alkaline igneous rocks have a geochemical affinity to arc-like magmatism, whereas coeval intracontinental magmatism is composed of bimodal igneous rocks and A-type granites. Spatial variations in the potassium contents of Early Jurassic igneous rocks from the continental margin to intracontinental region, together with the presence of an Early Jurassic accretionary complex, reveal that the onset of the Paleo-Pacific slab subduction beneath Eurasian continent occurred in the Early Jurassic. Middle Jurassic to early Early Cretaceous magmatism did not take place at the continental margin of Northeast Asia. This observation, combined with the occurrence of low-altitude biological assemblages and the age population of detrital zircons in an Early Cretaceous accretionary complex, indicates that a strike-slip tectonic regime existed between the continental margin and Paleo-Pacific slab during the Middle Jurassic to early Early Cretaceous. The widespread occurrence of late Early Cretaceous calc-alkaline igneous rocks, I-type granites, and adakitic rocks suggests low-angle subduction of the Paleo-Pacific slab beneath Eurasian continent at this time. The eastward narrowing of the distribution of igneous rocks from the Late Cretaceous to Paleogene, and the change from an intracontinental to continental margin setting, suggest the eastward movement of Eurasian continent and rollback of the Paleo-Pacific slab at this time.

Lithological discrimination of accretionary complex (Sivas, northern Turkey) using novel hybrid color composites and field data

One of the most appropriate approaches to better understand and interpret geologic evolution of an accretionary complex is to make a detailed geologic map. The fact that ophiolite sequences consist of various rock types may require a unique image processing method to map each ophiolite body. The accretionary complex in the study area is composed mainly of ophiolitic and metamorphic rocks along with epi-ophiolitic sedimentary rocks. This paper attempts to map the Late Cretaceous accretionary complex in detail in northern Sivas (within İzmir-Ankara-Erzincan Suture Zone in Turkey) by the analysis of all of the Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) bands and field study. The new two hybrid color composite images yield satisfactory results in delineating peridotite, gabbro, basalt, and epi-ophiolitic sedimentary rocks of the accretionary complex in the study area. While the first hybrid color composite image consists of one principle component (PC) and two band ratios (PC1, 3/4, 4/6 in the RGB), the PC5, the original ASTER band 4 and the 3/4 band ratio images were assigned to the RGB colors to generate the second hybrid color composite image. In addition to that, the spectral indices derived from the ASTER thermal infrared (TIR) bands discriminate clearly ultramafic, siliceous, and carbonate rocks from adjacent lithologies at a regional scale. Peridotites with varying degrees of serpentinization illustrated as a single color were best identified in the spectral indices map. Furthermore, the boundaries of ophiolitic rocks based on fieldwork were outlined in detail in some parts of the study area by superimposing the resultant maps of ASTER maps on Google Earth images of finer spatial resolution. Eventually, the encouraging geologic map generated by the image analysis of ASTER data strongly correlates with lithological boundaries from a field survey.

Interplay of irreversible reactions and deformation: a case of hydrofracturing in the rodingite\u2013serpentinite system

The interplay of irreversible reactions and deformation during regional metamorphism was analyzed in the reaction zones between rodingite and serpentinite. Rodingites are leucocratic rocks found commonly in serpentinites and are considered metasomatic products of Ca-rich fluid. Rodingites occur ubiquitously in serpentinite from the Nomo metamorphic rocks, western Kyushu, a Cretaceous accretionary complex of greenschist to epidote–amphibolite facies condition. We used the singular value decomposition (SVD) method to analyze rodingitization reactions based on mineral compositions of a rodingite sample and a possible protolith (clinopyroxene gabbro). The resultant reaction implied that the rodingite was formed due to the addition of considerable amounts of CaO and H2O to the protolith, whereas other components such as SiO2, AF (Al2O3 + Fe2O3), and FM (FeO + MgO) were conserved. The Nomo rodingites are associated with reaction zones between serpentinite. A careful study on the compositional variations of diopside and chlorite in the rodingite, serpentinite, and the reaction zones between them showed a disequilibrium crystallization of diopside in the reaction zone. Diopside shows a serrated variation in composition across the reaction zone together with disequilibrium signature within grains (composite grain consisting of Fe-rich and Fe-poor parts). These features clearly indicate that diopside crystallized in a relatively short period compared to the metamorphism by irreversible reactions. Another conspicuous feature is that perovskite occurs in some reaction zones, whereas titanite is common in rodingites; this indicates that the reaction zone is poorer in SiO2. The tremolite veins are typically derived from the reaction zone into serpentinite; showing this is a good example of hydrofracturing associated with the formation of the reaction zone. All the reactions obtained by the SVD method that contribute to the formation of the reaction zones consumed CaO and evolved H2O, strongly suggesting that the hydrofracturing is caused by a rapid increment of fluid pressure during the progression of the reactions. The reactions consumed considerable amounts of SiO2 in the reaction zone, which is consistent with the occurrence of perovskite, and the conservation of AF and FM components.

Origin and geodynamic environments of the metamorphic sole rocks from the İzmir–Ankara–Erzincan suture zone (Tokat, northern Turkey)

ABSTRACTThe Late Cretaceous accretionary complex of the İzmir–Ankara–Erzincan suture zone, near Artova, is composed mainly of peridotites (variably serpentinized), amphibolite, garnet-micaschist, calc-schist, marble, basalt, sandstones, neritic limestones. The metamorphic rocks were interpreted as the metamorphic sole rocks occurring at the base of mantle tectonites, because: (i) amphibolites were observed together with the serpentinized peridotites suggesting their occurrences in the oceanic environment; (ii) foliation in amphibolites and serpentinized peridotites run subparallel to each other; (iii) all these metamorphic rocks and serpentinized peridotites are cross-cut by the unmetamorphosed dolerite dikes with island arc tholeiite-like chemistry. Geochemical characteristics of the amphibolites display enriched mid-ocean ridge basalt (E-MORB)- and ocean island basalt (OIB)-like signatures. The dolerite dikes, on the other hand, yield an island arc tholeiite-like composition. Geothermobarometric investigations of the metamorphic sole rocks suggest that the metamorphic temperature was ~650 ± 30°C and the pressure condition was less than 0.5 GPa. Dating of hornblende grains from amphibolite yielded age values ranging from 139 ± 11 to 157 ± 3.6 Ma (2σ). The oldest weighted average age value is regarded as approximating the timing of the intra-oceanic subduction. These cooling ages were interpreted to be the intra-oceanic subduction/thrusting time of the İzmir–Ankara–Erzincan oceanic domain.

Late Cretaceous infant intra-oceanic arc volcanism, the Central Pontides, Turkey: Petrogenetic and tectonic implications

A tectonic slice of an arc sequence consisting of low-grade metavolcanic rocks and overlying metasedimentary succession is exposed in the Central Pontides north of the İzmir-Ankara-Erzincan suture separating Laurasia from Gondwana-derived terranes. The metavolcanic rocks mainly consist of basaltic andesite/andesite and mafic cognate xenolith-bearing rhyolite with their pyroclastic equivalents, which are interbedded with recrystallized pelagic limestone and chert. The metasedimentary succession comprises recrystallized micritic limestone with rare volcanogenic metaclastic rocks and stratigraphically overlies the metavolcanic rocks. The geochemistry of the metavolcanic rocks indicates an arc setting evidenced by depletion of HFSE (Ti, P and Nb) and enrichment of fluid mobile LILE. Identical trace and rare earth elements compositions of basaltic andesites/andesites and rhyolites suggest that they are cogenetic and derived from a common parental magma. The arc sequence crops out between an Albian–Turonian subduction–accretionary complex representing the Laurasian active margin and an ophiolitic mélange. Absence of continent derived detritus in the arc sequence and its tectonic setting in a wide Cretaceous accretionary complex suggest that the Kösdağ Arc was intra-oceanic. Zircons from two metarhyolite samples give Late Cretaceous (93.8±1.9 and 94.4±1.9Ma) U/Pb ages. These ages are the same as the age of the supra-subduction ophiolites in western Turkey, which implies that that the Kösdağ Arc may represent part of the incipient arc formed during the generation of the supra-subduction ophiolites. The low-grade regional metamorphism in the Kösdağ Arc is constrained to 69.9±0.4Ma by 40Ar/39Ar muscovite dating indicating that the arc sequence became part of a wide Tethyan Cretaceous accretionary complex by the latest Cretaceous. Non-collisional cessation of the arc volcanism is possibly associated with southward migration of the magmatism as in the Izu-Bonin-Mariana arc system.

Reconstruction of tectonic process in fore-arc region: zircon U–Pb ages from Jurassic and Cretaceous accretionary complexes in the Mitsumine area, Kanto Mountains

Reconstruction of tectonic process in fore-arc region: zircon U–Pb ages from Jurassic and Cretaceous accretionary complexes in the Mitsumine area, Kanto Mountains

Jurassic accretionary complex and ophiolite from northeast Turkey: No evidence for the Cimmerian continental ribbon

Permian-Triassic and Late Cretaceous accretionary complexes, ascribed to the consumption of two distinct oceans, the Paleo- and Neo-Tethys, are exposed over extensive areas in the Eastern Mediterranean region. However, a separating continental ribbon, the so-called Cimmeride continent, between the Paleo- and Neo-Tethys during early Mesozoic time cannot be defined. Here we report a previously unknown Early Jurassic metamorphic oceanic accretionary complex and ophiolite from northeast Turkey, bounded by oceanic accretionary complexes of Permian-Triassic and Late Cretaceous age to the north and the south, respectively, without a continental domain in between. This special tectonic position and widespread coexistence of Permian-Triassic and Late Cretaceous accretionary complexes alongside the Izmir-Ankara-Erzincan suture imply that (1) the southern margin of Laurasia in the eastern Mediterranean region grew by episodic accretionary processes from late Paleozoic to end-Mesozoic time without involvement of a Cimmerian continental ribbon, and (2) the Paleo-Tethys and northern branch of the Neo-Tethys were not distinct oceans in the Eastern Mediterranean region.

Fault tectonic analysis of Kii peninsula, Southwest Japan: Preliminary approach to Neogene paleostress sequence near the Nankai subduction zone

AbstractThe southern part of the Outer Zone of Southwest Japan including the Kii peninsula belongs to the tectonic ‘shadow zone’, where fewer conspicuous active faults and less Quaternary sediments develop than in the Nankai subduction zone and Inner Zone of Southwest Japan. In order to study the paleostress sequence of the Kii peninsula, we analyzed fault‐slip data and tension gashes at pilot sites of Early–Middle Miocene forearc sediments and Late Cretaceous accretionary complex. According to the results, six faulting events are reconstructed in sequence: (i) east–west extension (normal faulting); (ii) east–west compression and north–south extension (strike‐slip faulting); (iii) NNW–SSE compression and ENE–WSW extension (strike‐slip faulting); (iv) northeast–southwest compression and northwest–southeast extension (strike‐slip faulting); (v) WNW–ESE compression (strike‐slip or reverse faulting); and (vi) NNE–SSW extension. The north–south to NNW–SSE trending dyke swarm of Middle Miocene age in the Kii peninsula is thought to be related to Event 3, implying that Event 3 was active at least during the Middle Miocene. Because Event 6 is recognized solely at a site, the overall latest faulting event seems to be Event 5. Assuming that the compression results from the motion of the crust or plate, the compression direction of Event 5 is in good accordance with the present‐day WNW crustal velocity vectors of the Kii peninsula. The stress trajectory map of Southeast Korea and Southwest Japan reveals that the current compression directions of the Kii peninsula correspond to the combinatory stress fields of the Himalayan and Philippine Sea tectonic domains.