Cratonic Basins Research Articles

Seismic Identification and Characterization of Deep Strike-Slip Faults in the Tarim Craton Basin

Seismic Identification and Characterization of Deep Strike-Slip Faults in the Tarim Craton Basin

Abrupt structural deformation changes from the boundary to the interior of a craton basin: Implications for the long-term stability of cratonic blocks

Stable intraplate cratonic blocks usually have less structural deformation and fewer earthquakes than other locations on Earth, but with strong compressional deformation around their periphery. Investigating how and why this different deformation occurred is beneficial for understanding why the cratonic block is so stable and how the intraplate in-plane stress is transmitted. In this work, we first investigated the structural deformation changes from the margin to the interior of the western Ordos block (one of the most tectonically stable areas in China) via seismic data. The results show abrupt structural deformation changes from the margin to the interior of the Ordos block in terms of the deformation strength (from strong to weak), structural orientation (high-angle oblique relationships), and kinematics (from compression to wrenching). Our investigation also shows that such phenomena are widespread in cratonic blocks worldwide. The abrupt changes are probably induced by special in-plane stress transfer inside the cratonic block: When far-field stress is transmitted into continental interiors from active plate margins, the weak belt around the cratonic block filters and accommodates the in-plane stress. Consequently, this decreases the stress, changes the stress direction, and transmits the in-plane stress along a shallower layer (probably less than 1500 m). Furthermore, the compressional stress from the plate margin is converted into shear stress within the cratonic block. This stress transmission manner makes reactivation of deep preexisting faults difficult under far-field horizontal plate-boundary stresses in the cratonic block without vertical forces from the mantle, guaranteeing long-term stability and low seismicity. This understanding can provide a new perspective for the interpretation of earthquakes in stable continental regions. It can also be applied to appraise the long-term stability of sites for the storage of CO2.

Genesis and reservoir preservation mechanism of 10 000‐m ultradeep dolomite in Chinese craton basin

AbstractThe 10 000‐m ultradeep dolomite reservoir holds significant potential as a successor field for future oil and gas exploration in China's marine craton basin. However, major challenges such as the genesis of dolomite, the formation time of high‐quality reservoirs, and the preservation mechanism of reservoirs have always limited exploration decision‐making. This research systematically elaborates on the genesis and reservoir‐forming mechanisms of Sinian–Cambrian dolomite, discussing the ancient marine environment where microorganisms and dolomite develop, which controls the formation of large‐scale Precambrian–Cambrian dolomite. The periodic changes in Mg isotopes and sedimentary cycles show that the thick‐layered dolomite is the result of different dolomitization processes superimposed on a spatiotemporal scale. Lattice defects and dolomite embryos can promote dolomitization. By simulating the dissolution of typical calcite and dolomite crystal faces in different solution systems and calculating their molecular weights, the essence of heterogeneous dissolution and pore formation on typical calcite and dolomite crystal faces was revealed, and the mechanism of dolomitization was also demonstrated. The properties of calcite and dolomite (104)/(110) grain boundaries and their dissolution mechanism in carbonate solution were revealed, showing the limiting factors of the dolomitization process and the preservation mechanism of deep buried dolomite reservoirs. The in situ laser U‐Pb isotope dating technique has demonstrated the timing of dolomitization and pore formation in ancient carbonate rocks. This research also proposed that dolomitization occurred during the quasi‐contemporaneous or shallow‐burial periods within 50 Ma after deposition and pores formed during the quasi‐contemporaneous to the early diagenetic periods. And it was clear that the quasi‐contemporaneous dolomitization was the key period for reservoir formation. The systematic characterization of the spatial distribution of the deepest dolomite reservoirs in multiple sets of the Sinian and the Cambrian in the Chinese craton basins provides an important basis for the distribution prediction of large‐scale dolomite reservoirs. It clarifies the targets for oil and gas exploration at depths over 10 000 m. The research on dolomite in this study will greatly promote China's ultradeep oil and gas exploration and lead the Chinese petroleum industry into a new era of 10 000‐m deep oil exploration.

Decoding the complex fluvial-lacustrine sedimentary interactions: Insights from the Neogene Guantao Formation in the Bohai Bay Basin and Modern Poyang Lake, China

Small-scale lake level variations lead to significant landward/basinward shifts in the depositional system, thereby facilitating the widespread development of fluvial-lacustrine interaction sedimentary systems. Such systems are commonly found in low-gradient shallow-water continental down-warped lacustrine basins, which are favorable for the formation of composite reservoir-caprock assemblages. Nevertheless, our understanding of the sedimentary stratigraphy of the Neogene Guantao Formation remains limited due to the complex and variable spatial and temporal associations between fluvial and lacustrine deposits. Integrated analysis of the geomorphology and stratigraphy of the modern Poyang Lake Basin and ancient Bohai Bay Basin (BBB) allows us to develop a process-based fluvial-lacustrine interaction model of shallow-water depositional system. Three physiographic zones are identified based on seasonal lake shoreline migration during a certain geological sequence unit, namely fluvial-dominated zone (FDZ), fluvial-lacustrine interaction zone (FLIZ) and lacustrine-dominated zone (LDZ), respectively. The FDZ is always above the maximum lake shoreline without affection by lake basin water body and is characterized by channelized dendritic pattern of distributary channels with positive rhythmic cycles. The FLIZ is a dynamic interaction region between the maximum lake shoreline and the lowest lake shoreline. Reticular distributary channels, delta front and prodelta/lake deposits vertically superimpose and dominate the system that is featured by complex sandbody, stacked positive and negative rhythms and strong water body segmentation. The LDZ, away from the fluvial effect, was identified below the lowest lake shoreline exhibiting polycentric sheet water body, dominated by lacustrine mudstone interspersed with thin sheet-like sandstone. These results shed light on the spatial and temporal sedimentary heterogeneity in such dynamic fluvial-lacustrine interaction systems. The proposed fluvial-lacustrine interaction model may serve as a valuable analogue for identifying sedimentary types and predicting sandstone reservoirs in similar shallow-water settings ranging from continental down-warped lacustrine basins to cratonic basins, and fault-depression basin gentle-slope belts.

Evolving fill‐and‐spill patterns across linked early post‐rift depocentres control lobe characteristics: Los Molles Formation, Argentina

ABSTRACTInherited rift topography controls the sediment routing, timing of sand supply, and sedimentary linkage of early post‐rift depocentres. Exhumed examples of early post‐rift turbidite systems are rare and previous studies have examined the evolution of individual depocentres; in contrast, the detailed evolution of early post‐rift turbidite systems across multiple depocentres has never been documented. Current fill‐and‐spill models do not detail the stratigraphic architecture and evolution of sedimentological characteristics of multiple intraslope fans developed across topography, including bed type distributions. Here, the evolution of three intraslope fans that developed across two early post‐rift depocentres is documented along an 18 km long transect in the southern Neuquén Basin, Argentina. The relative chronology of sand supply in depocentres is constrained with new U–Pb ages, and sediment source areas with provenance analysis. The early post‐rift intraslope fans record progradation of the system and progressive sedimentary linkage of post‐rift depocentres, transverse to local syn‐rift structures, with sediment routing subparallel to the cratonic basin margin. The large‐scale stratigraphic architecture of intraslope fans indicates an evolution as a fill‐and‐spill system, with initial confinement through flow stripping and overspill to spillover with erosion and bypass across a transverse topographic high separating the depocentres. Changes in early post‐rift intraslope fan characteristics, including thickness, sandstone content, lobe complex stacking patterns, stratal termination patterns and bed type distribution, record changing confinement through time within a depocentre, and spatially across depocentres. The strong spatial and vertical stratigraphic variability of transitional flow deposits and hybrid event beds reflects enhanced erosion, sediment bypass and flow transformation across transverse relief between the two depocentres during the spillover phase. These findings advance current understanding of early post‐rift turbidite systems and refine fill‐and‐spill models, which will help the prediction of spatial and vertical changes in rock quality and connectivity in subsurface hydrocarbon reservoirs and CO2 storage sites.

Two stages of subsidence and its formation mechanisms in Mid-Late Triassic Ordos Basin, NW China

Based on a large number of newly added deep well data in recent years, the subsidence of the Ordos Basin in the Mid-Late Triassic is systematically studied, and it is proposed that the Ordos Basin experienced two important subsidence events during this depositional period. Through contrastive analysis of the two stages of tectonic subsidence, including stratigraphic characteristics, lithology combination, location of catchment area and sedimentary evolution, it is proposed that both of them are responses to the Indosinian Qinling tectonic activity on the edge of the craton basin. The early subsidence occurred in the Chang 10 Member was featured by high amplitude, large debris supply and fast deposition rate, with coarse debris filling and rapid subsidence accompanied by rapid accumulation, resulting in strata thickness increasing from northeast to southwest in wedge-shape. The subsidence center was located in Huanxian–Zhenyuan–Qingyang–Zhengning areas of southwestern basin with the strata thickness of 800–1 300 m. The subsidence center deviating from the depocenter developed multiple catchment areas, until then, unified lake basin has not been formed yet. Under the combined action of subsidence and Carnian heavy rainfall event during the deposition period of Chang 7 Member, a large deep-water depression was formed with slow deposition rate, and the subsidence center coincided with the depocenter basically in the Mahuangshan–Huachi–Huangling areas. The deep-water sediments were 120–320 m thick in the subsidence center, characterized by fine grain. There are differences in the mechanism between the two stages of subsidence. The early one was the response to the northward subduction of the MianLüe Ocean and intense depression under compression in Qinling during Mid-Triassic. The later subsidence is controlled by the weak extensional tectonic environment of the post-collision stage during Late Triassic.

Insights into the Phanerozoic evolution of the São Francisco Craton based on detrital zircon thermochronology and U-Pb-Hf geochronology

Basins within cratonic environments offer valuable insights into the fragmentation, dispersion, and agglutination of the lithosphere within supercontinents. The southern São Francisco Craton is home to sedimentary basins that formed in both intraplate tectonic settings (late Paleoproterozoic to Neoproterozoic and Mesozoic) and convergent tectonic settings (Ediacaran to Cambrian). To elucidate the Phanerozoic thermal history of the craton and the long-term depositional history of the southern São Francisco Craton’s cover, a comprehensive study was conducted utilizing detrital zircons through zircon fission-track (ZFT) thermochronology and U-Pb-Hf geochronology. This study analyzed samples from the following units: (1) the intracratonic basin—Lower and Upper Espinhaço Supergroup, with depositional age intervals ranging 1800−1600 Ma and 1200−920 Ma, respectively; (2) the rift-related passive margin basin—Lower Macaúbas Group (720 Ma and 640 Ma) and Jequitaí Formation, which is likely of Cryogenian age (650−635 Ma); (3) and the foreland basin—Bambui Group and Três Marias Formation, with ages of ca. 600−520 Ma and 520−480 Ma, respectively. U-Pb-Hf detrital zircon geochronology revealed the complex depositional history of the southern São Francisco Craton, and indicated changing source rocks over time. Conversely, the ZFT analysis of Precambrian to Cambrian samples allowed for the identification and characterization of Phanerozoic events in the southern São Francisco Craton. These events include: (1) the exhumation and late orogenic uplift of the foreland at ca. 500−480 Ma (mean age of 499 ± 5.5 Ma) during the late stages of the Brasiliano−Pan-African Cycle, which was associated with the Araçuaí Belt and lithospheric rebound of the peripheral cratonic margin of the southern São Francisco Craton; and (2) an age of 330−280 Ma (mean age of 306.6 ± 4.8 Ma) that possibly resulted from ice retreat and isostatic rebound interior of the Gondwana Paleocontinent. Additionally, analysis of detrital zircons from the Areado Group shows a later tectonic event recorded at 128.1 ± 9.4 Ma, which indicates Mesozoic intracontinental rifting. Based on these results and interpretations, the timing and exhumation of the southern São Francisco Craton during the Phanerozoic can be attributed to the final stages of the continental collision of the southern São Francisco Craton and Congo Craton and large-scale continental uplift during the Permo-Carboniferous late Paleozoic Ice Age of Gondwana. Overall, the findings demonstrate a direct correlation between known tectonic events at the plate margins of Western Gondwana and periods of cratonic basin formation.

A Continental Model of Curie Point Depth for China and Surroundings Based on Equivalent Source Method

AbstractThe Curie Point Depth (CPD) marks a significant temperature boundary (∼580°C) within the Earth's lithosphere. However, there has been ongoing debate regarding its spatial distribution. In this research, we utilized the Equivalent Source Method (ESM) based on Gauss‐Legendre integration and data obtained from the EMM2017 model, along with a five‐layer susceptibility model, to generate a 0.5° × 0.5° grid of continental CPD distribution for China and surroundings. The average CPD in the study area is 30.4 km, which is slightly shallower than the average depth of global continental Moho (∼33 km). Notably, stable and cold cratonic basins, such as the Tarim Basin and the Sichuan Basin, exhibit deep CPD of ∼45 km. In contrast, the North China Craton, which has experienced significant tectono‐thermal activity since the Late Mesozoic, shows moderate CPD of ∼30 km and a gradual uplift from west to east. The Tuva‐Mongol orocline within the Central Asian Orogenic Belt, the Deccan Volcanic Province in the Indian subcontinent and the Eastern Yangtze Craton have shallow CPD of ∼20 km. We estimate the surface heat flow by CPD, and the result is consistent with measurements within a RMSE of 18.1 mW/m2. When comparing the CPD with Moho, we find that the CPD may lie below Moho in stable and cold cratonic areas. In comparison to two recent global CPD models, our regional model demonstrates better alignment with tectonic features.

Greenstones as a source of hydrogen in cratonic sedimentary basins

Abstract A model is presented for the generation of natural hydrogen from cratonic basement rocks and its migration into the sediments of overlying cratonic basins. It is based on the ‘discovery’ of hydrogen at Bourakebougou in the Taoudeni Basin of Mali. In the ‘Cratonic Greenstone Model’, hydrogen is generated by the serpentinization of olivine-rich, ultramafic rocks contained within Precambrian ‘greenstones’. The model requires a protolith (in greenstones), a supply of water (from groundwater), connecting faults to act as a plumbing system and an indurated sediment cover to retard hydrogen movement. Hydrogen is expelled into the overlying basin sediments, which form the host for hydrogen accumulations. The model describes a continental ‘hydrogen system’, which can form the basis for petroleum-type play-based hydrogen exploration in cratonic settings. Using play elements derived from the model, the Bourakebougou play fairway can be extended across the Taoudeni Basin >700 km northwards of the discovery.

Hydrocarbon accumulation characteristics in basement reservoirs and exploration targets of deep basement reservoirs in onshore China

Based on the global basement reservoir database and the dissection of basement reservoirs in China, the characteristics of hydrocarbon accumulation in basement reservoirs are analyzed, and the favorable conditions for hydrocarbon accumulation in deep basement reservoirs are investigated to highlight the exploration targets. The discovered basement reservoirs worldwide are mainly buried in the Archean and Precambrian granitic and metamorphic formations with depths less than 4 500 m, and the relatively large reservoirs have been found in rift, back-arc and foreland basins in tectonic active zones of the Meso-Cenozoic plates. The hydrocarbon accumulation in basement reservoirs exhibits the characteristics in three aspects. First, the porous-fractured reservoirs with low porosity and ultra-low permeability are dominant, where extensive hydrocarbon accumulation occurred during the weathering denudation and later tectonic reworking of the basin basement. High resistance to compaction allows the physical properties of these highly heterogeneous reservoirs to be independent of the buried depth. Second, the hydrocarbons were sourced from the formations outside the basement. The source-reservoir assemblages are divided into contacted source rock-basement and separated source rock-basement patterns. Third, the abnormal high pressure in the source rock and the normal–low pressure in the basement reservoirs cause a large pressure difference between the source rock and the reservoirs, which is conducive to the pumping effect of hydrocarbons in the deep basement. The deep basement prospects are mainly evaluated by the factors such as tectonic activity of basement, source-reservoir combination, development of large deep faults (especially strike-slip faults), and regional seals. The Precambrian crystalline basements at the margin of the intracontinental rifts in cratonic basins, as well as the Paleozoic folded basements and the Meso-Cenozoic fault-block basements adjacent to the hydrocarbon generation depressions, have favorable conditions for hydrocarbon accumulation, and thus they are considered as the main targets for future exploration of deep basement reservoirs.

Plume‐Modified Lithosphere Mantle Controlled the Cenozoic Sediment Thickness in the Tarim Basin

AbstractThe Cenozoic sediments are very thick in the southwest Tarim Basin and very thin in the northwest, but what controls these variations is unclear. Here, we use two‐dimensional thermo‐mechanical models to investigate how the lateral variations in rheological strength and depletion density of cratonic lithosphere mantle affect the cratonic basin deformation. Model results show that the basin basement uplift occurs above either the region with crustal thickening or high depletion in the mantle. A model with a stronger and density‐depleted northern half of cratonic lithosphere mantle in the context of compression matches the differential Cenozoic subsidence and deformation observed in the Tarim Basin well. We propose that a Permian plume led to the lateral heterogeneity of the lithosphere mantle under the Tarim craton, and the modified lithosphere mantle characteristics caused the differential Cenozoic sediment thickness in the Tarim Basin.

An Analysis of Silurian Paleo–Tethys Hydrocarbon Source Rock Characteristics in North Africa, the Middle East, and South China

In this study, we elucidate the genesis and distribution patterns of Silurian hot shale hydrocarbon source rocks by utilizing a comparative analysis of the evolutionary characteristics of plate tectonic activity in the Paleo–Tethys Ocean and the sedimentary filling characteristics of key basins in North Africa, the Middle East, and South China. We propose an explanation for the sedimentary genesis of world-class Silurian hydrocarbon source rocks in the Paleozoic craton basin of the ancient Tethys tectonic domain. This is achieved by scrutinizing the plate tectonic activity and evolution of the ancient Tethys Ocean and combining these findings with the paleotectonic sedimentation background of North Africa, the Middle East, and South China. Additionally, we compare Silurian hydrocarbon source rocks from these regions. The deep-water stagnant environment of the land shelf favors the preservation of organic matter, thereby forming high-quality hydrocarbon source rocks. Conversely, the shallow-water body of the land shelf is more turbulent, thus resulting in the poorer preservation of organic matter and, consequently, lower-quality hydrocarbon source rocks.

Nd isotope and element composition of shales from the Parnaíba Basin, NE Brazil: Insights for provenance shifts in a cratonic basin

Sm-Nd and Sr isotope compositions of 24 samples of fine-grained clastic rocks from eastern Parnaíba basin, NE-Brazil, are presented along with major and trace element compositions of 19 of these samples. Samples were collected from outcrops of the Paleozoic Canindé (Pimenteiras, Longá and Poti) and Balsas (Piaui Formation) groups, and from the Jurassic Pastos Bons Formation. Discrimination diagrams based on Th, Sc, La and Zr indicate sedimentary provenance from felsic dominant sources and high degrees of crustal recycling. PAAS-normalized REE diagrams show that the Pimenteiras and Longá Formations display flat patterns with slight REE enrichment, and initial εNd and 87Sr/86Sr around the average composition of the upper continental crust, respectively between −8.9 and −14.6 and between 0.711 and 0.760, indicating provenance from old Precambrian basement. The Nd TDM model ages of the Pimenteiras between 1.32 Ga and 2.00 Ga indicate heterogeneity of source areas during the Devonian, and TDM ages around 1.6 Ga in the Longá Formation samples suggest intense recycling of older sediments. The Poti formation samples yield TDM ages of 2.30 Ga and 2.32 Ga, respectively, suggesting tectonic reactivation and new input from Archean-Paleoproterozoic basement complexes. The Pastos Bons Formation samples show lower Th-Sc ratios, light-REE depletion, and less negative initial εNd, indicating contribution from mafic rocks, probably from the underlying Mosquito Formation intraplate tholeiitic basalts and dolerites.

Deciphering the origin and secondary alteration of deep natural gas in the Tarim basin through paired methane clumped isotopes

The Tarim Basin is one of the most complex, ancient, and petroliferous deep craton basins in the world. Multiple sets of source rocks, stages of tectonism, and episodes of hydrocarbon generation and accumulation complicate the formation and evolutionary processes of hydrocarbons in the basin, especially for the deeply buried petroleum system at >6000 m depth. Paired clumped isotopes (Δ13CH3D and Δ12CH2D2) allow the investigation of methane isotopic bond ordering, elucidating the methane generation mechanism and its post-generation processes, which can complement studies of the molecular and conventional stable isotopic compositions of gas hydrocarbons in constraining the origin and source of natural gas. This study focused on methane clumped isotopes, and chemical and conventional stable isotopic compositions of natural gas samples from four typical oil and gas regions of the Tarim Basin. Results indicate that these gases are thermogenic gases with relatively high stable isotopic δ values (i.e., −46.1‰ < δ13C–CH4 < −25.9‰, −184‰ < δD-CH4 < −140‰). Most exhibit equilibrium methane clumped isotope signatures at temperatures of 128–257 °C, consistent with the main oil-window to gas-window region. The clumped isotope apparent temperature of equilibrated methane was used to determine its formation temperature, which was applied for gas–source correlations and thermal maturity assessments of the natural gases based on the results of previous basin modeling. The clumped isotope compositions of two gas samples from the Keshen area of the basin are characterized by significant deficits in Δ12CH2D2 values but with similar Δ13CH3D values to those of other equilibrated gases there, indicating the possibility of methane bond re-ordering at high temperatures (>300 °C) exceeding the methane “closure temperature”. Non-equilibrium gases in the Tabei area yielded a plausible Δ13CH3D apparent temperature (<160 °C) with a pronounced deficit in Δ12CH2D2 values, possibly owing to irreversible chemical kinetic processes in thermal cracking of organic matter at early thermal maturity (Ro < 1.5‰) or mixing between thermogenic gases generated at two distinct temperatures (i.e., ∼200 °C and ∼120 °C). Equilibrium clumped isotope signatures also rule out the possible effects of secondary alteration on natural gases in the Hetianhe area that were previously considered in conventional isotope studies. Such findings demonstrate that methane clumped isotopes provide independent and effective indicators of gas–source correlations in deep basins while also elucidating secondary processes that are often under- or over-estimated in conventional stable isotope studies.

Microfacies and paleoenvironment of microbialites of the Cambrian (Stage 4) Qingxudong Formation in the Huayuan area, northwestern Hunan Province, southern China

After the extinction of Archaeocyatha (sponges), microbial bioherms were well developed in the lower Cambrian of the Yangtze cratonic basin, especially in the Qingxudong Formation (Cambrian (Stage 4)) of the Huayuan area, northwestern Hunan Province, southern China. Herein, four sections from this area were chosen for investigating and analyzing their microfacies and depositional environment. Twelve microfacies types were recognized through petrographic analysis of textural attributes and calcimicrobes (including Epiphyton, Renalcis, Girvanella and Kenella), respectively as: laminated calcareous mudstone (MF1), algal wackestone (MF2), intraclastic grainstone (MF3), algal intrasparrudite (MF4), oolitic algal intrasparrudite (MF5), sparry oolitic grainstone (MF6), Epiphyton framestone (MF7), Renalcis bafflestone (MF8), Kenella bafflestone (MF9), Girvanella boundstone (MF10), thrombolitic boundstone (MF11), and dolomite (MF12). These microfacies represent four major depositional environments: carbonate ramp, carbonate platform, slope and tidal flat. Calcimicrobes played an important role in the transition from carbonate ramp to platform, while the evolution from ramp to tidal flat must be ascribed to sea-level fall during the Cambrian Age 4.

Cratonic basins as effective sediment barriers in continent-scale sediment routing systems of Paleozoic North America

Provenance studies demonstrate the important control of plate boundary mountain building on continental sediment routing systems. Less well understood is if subsidence and uplift in cratons also has the potential to affect the organization of sediment routing systems on continental scales. New detrital zircon provenance data from the Michigan Basin in the Midcontinent of North America preserve evidence of intrabasin provenance heterogeneity in Cambrian, Ordovician, and middle Devonian strata. These results suggest that cratonic basins serve as effective sediment barriers that prevent mixing within and across basins from 10 to 100 s of millions of years. Internal sediment mixing, sorting, and dispersal may be achieved by a combination of sedimentary processes and inherited low relief topography. These observations are consistent with provenance data sets from eastern Laurentian Midcontinent basins that show locally and regionally variable provenance signatures during the early Paleozoic. By the late Devonian, provenance signatures throughout the basins homogenized, consistent with the emergence of transcontinental sediment transport systems associated with Appalachian orogenesis at the plate margin. These results demonstrate the importance of cratonic basins on local and regional sediment routing systems suggesting that these features may impede the integration of continental-scale sediment routings systems, particularly during periods of plate margin quiescence.

Gzhelian cyclothem development in the western North China cratonic basin and its glacioeustatic, tectonic, climatic and autogenic implications

The Gzhelian Ximing Sandstone–to–No. 8 Coal succession of the Taiyuan Formation in the Linxing gas field and adjacent areas records the complex nested architecture of the Palougou Cyclothem and component cyclothems 2–10 developed in the western North China underfilled cratonic basin. Integrated facies and sequence stratigraphic analysis of core, well log, outcrop, and seismic data reveals architectural variation of the Palougou Cyclothem in the study area from southwestward retrograding incised-valley estuary and lagoon (TST) through upward and northeastward prograding coastal plain to epeiric shelf (HST) into downward and eastward prograding open-coast tidal flat and epeiric shelf with aggrading distributive fluvial system (FSST). The component cyclothems vary in the internal architecture through the Palougou Cyclothem from mixed retrogradational–progradational (R–P; R/P > 1) cyclothems 2–4 in the early TST to retrogradation-dominated (R/P ≫1) cyclothems 5–7 in the late TST, progradation-dominated (R/P ≪1) Cyclothem 8 in the HST, and fluvial aggradation-dominated cyclothems 9 and 10 in the FSST. The Palougou Cyclothem and component cyclothems constrained by conodont-bearing limestone marker beds and radiometric dating have been observed to be substantially synchronized with the Gzhelian interglacial–glacial cyclothem and nested 400-kyr cyclothems in the North American Midcontinent and Donets Basin. The cyclic change in accommodation at the scale of the Palougou Cyclothem and component cyclothems has been ascribed to the third-order interglacial–glacial cycle and fourth-order, long eccentricity (ca. 400 kyr)-driven glacioeustatic fluctuations coupled with the tectonically driven source–to–sink reorganization. The progressively decreasing siliciclastic flux and increasing vegetation through both the Palougou Cyclothem and individual component cyclothems have been ascribed to the third- and fourth-order equatorial seasonally dry–wet climatic cycles coupled with the tectonically driven source–to–sink reorganization, in concert with the Gzhelian third- and fourth-order interglacial–glacial eustatic cycles. Both the transgressive fluvial degradation and the falling-stage fluvial aggradation have been ascribed to a higher-gradient fluvial profile relative to the gradient of the receiving North China epeiric shelf. The autogenic shoreline retreat, advance and channel migration modified the depositional response to the third- and fourth-order sea level rise through time. The termination of the falling-stage fluvial channel belts in the lateral and distal floodplain mires has been ascribed to the sustained fluvial aggradation and autodetachment of the fluvial fan from the syn-depositional shoreline in response to steady fall of relative sea level. This study contributes to a proper understanding of the Gzhelian North China intracratonic cyclothem development in response to the coupled glacioeustatic, tectonic, climatic, and autogenic processes at the third- and fourth-order scales, but also provides a context within which to interpret the symbiotic relationship, and predict the distribution, of superimposed coal–sandstone–shale gas reservoirs, and to investigate the impact of depositional heterogeneities on hydrocarbon generation and migration pathways.

Characteristics and Gas-Bearing Properties of Yanchang Formation Shale Reservoirs in the Southern Ordos Basin

Ordos Basin is a multicycle superimposed cratonic basin in northern China with a simple internal structure and a gentle stratigraphic slope. It is characterized by extensive development, numerous oil and gas-bearing layers, and complete source-reservoir-caprock assemblages. However, the research on continental shale reservoirs and gas-bearing characteristics in the southern part of the basin is not in-depth enough, which restricts the further exploration and development of shale gas in this area. In this paper, the development characteristics of pores and fractures in shale reservoirs and the gas-bearing characteristics of Yanchang Formation shale in the study area are summarized by the comprehensive use of field outcrop, core, and logging, combined with common thin section observation, scanning electron microscope observation, X-ray diffraction analysis, and other methods and techniques. Research indicates that the cement content of the sandstone in the Yanchang Formation reservoir in the south of Ordos is generally 5%-25%. The reservoir also has a large number of primary pores, secondary pores, and microfractures. The gas content of the Yanchang Formation shale represented by Chang 7 is related to both organic matter and pore structure.

Interpretation of Sand Body Architecture in Complex Fault Block Area of Craton Basin: Case Study of TIII in Sangtamu Area, Tarim Basin

The complex fault block oilfields in the craton basin contain vast reserves of oil and gas resources. During the development of an oilfield, the flow of oil, gas, and water, is controlled by faults and configuration boundaries. The distribution of remaining oil and gas depends on the interpretation of the reservoir’s architecture. However, recognizing the faults and the architecture boundary remains a challenge, hindering the efficient development of these resources. This study proposes a new idea for interpreting the configuration of thick sand bodies. This study was conducted in order to interpret the fine architecture of thick sand bodies in the Sangtamu area, using core samples, well logging, and production data, guided by sedimentation patterns from ancient to modern times. Results indicate that the Sangtamu area is a braided river delta front sedimentary system, dominated by the backbone underwater distributary channel and branch-type underwater distributary channels. The backbone channel is larger in scale, with a relatively large rock grain size and a box-shaped logging curve, whereas the smaller-scale branch channels have a bell-shaped logging curve resulting from the gradual weakening of water energy. Sandstone bodies from different types of underwater distributary channels are spatially overlapped, forming thick plate-like sandstones. The architecture interface between channels can be used as the fluid seepage boundary and can help prevent bottom water intrusion to a certain extent. The remaining oil is primarily concentrated in the architecture boundary area, which presents the next potential tapping area.

The lithospheric S-wave velocity structure beneath the NE Tibetan Plateau and its surrounding craton basins

It is essential to investigate the spatial distribution of the lithosphere and asthenosphere in detail, to further obtain the understanding of the effect of plate collision and the process of orogenic movement. From the joint inversion of receiver functions and surface waves, the three-dimensional S-wave velocity structure results down to 200 km depth in the study area were obtained at 1,843 seismic stations. Analysis was performed on the sedimentary thickness, crustal thickness, lower crustal wave velocity, and lithospheric thickness. According to the crustal thickness, we evaluated the distribution of low-velocity zones in the lower crust. The results show that there are low-velocity bodies in the lower crust in the Qinling tectonic belt, but they are not connected, indicating that they may not be able to be used as a channel for material extrusion from the NE Tibetan Plateau at the crustal scale. According to the section results and the depth distribution of the lithosphere-astenosphere boundary, a relatively thick lithosphere exists below the Sichuan Basin and Ordos Basin, and the lithosphere in the east of the study area is relatively thin with a thickness of about 60–80 km, indicating that the lithosphere in the east of the study area has been severely destructed and restructured. The delamination has been observed in the lithosphere under the Songpan-Ganzi Block, showing characteristics of vertical movement of asthenosphere materials. There is a relatively thick low-velocity zone at the top of the mantle lithosphere of the NE plateau; however, it does not exist under the relatively stable Sichuan Basin and the Ordos Block. Compared with the Sichuan Basin and the Ordos Basin at both sides, the Qinling tectonic belt has a low-velocity zone at the depth of 100–160 km, which may be asthenosphere material. In combination with the polarization direction characteristics of the SKS wave, it is clearly observed that asthenospheric material movement exists in an approximate east-west direction beneath the Qinling tectonic belt. Therefore, the asthenosphere beneath the Qinling tectonic belt may serve as an important channel for material extrusion in the NE Tibetan Plateau.