Covalent Network Research Articles

Ultra-Fast Selenol-Yne Click (SYC) Reaction Enables Poly(selenoacetal) Covalent Adaptable Network Formation.

The emergence of covalent adaptable networks (CANs) based on dynamic covalent bonds (DCBs) presents a promising avenue for achieving resource recovery and utilization. In this study, we discovered a dynamic covalent bond called selenacetal, which is obtained through a double click reaction between selenol and activated alkynes. Density functional theory (DFT) calculations demonstrated that the ΔG for the formation of selenoacetals ranges from 12 to 18 kJ mol-1, suggesting its potential for dynamic reversibility. Dynamic exchange experiments involving small molecules and polymers provide substantial evidence supporting the dynamic exchange properties of selenoacetals. By utilizing this highly efficient click reaction, we successfully synthesized dynamic materials based on selenoacetal with remarkable reprocessing capabilities without any catalysts. These materials exhibit chemical recycling under alkaline conditions, wherein selenoacetal (SA) can decompose into active enone selenide (ES) and diselenides. Reintroducing selenol initiates a renewed reaction with the enone selenide, facilitating material recycling and yielding a newly developed dynamic material exhibiting both photo- and thermal responsiveness. The results underscore the potential of selenoacetal polymers in terms of recyclability and selective degradation, making them a valuable addition to conventional covalent adaptable networks.

Ultra‐Fast Selenol‐Yne Click (SYC) Reaction Enables Poly(selenoacetal) Covalent Adaptable Network Formation

AbstractThe emergence of covalent adaptable networks (CANs) based on dynamic covalent bonds (DCBs) presents a promising avenue for achieving resource recovery and utilization. In this study, we discovered a dynamic covalent bond called selenacetal, which is obtained through a double click reaction between selenol and activated alkynes. Density functional theory (DFT) calculations demonstrated that the ΔG for the formation of selenoacetals ranges from 12 to 18 kJ mol−1, suggesting its potential for dynamic reversibility. Dynamic exchange experiments involving small molecules and polymers provide substantial evidence supporting the dynamic exchange properties of selenoacetals. By utilizing this highly efficient click reaction, we successfully synthesized dynamic materials based on selenoacetal with remarkable reprocessing capabilities without any catalysts. These materials exhibit chemical recycling under alkaline conditions, wherein selenoacetal (SA) can decompose into active enone selenide (ES) and diselenides. Reintroducing selenol initiates a renewed reaction with the enone selenide, facilitating material recycling and yielding a newly developed dynamic material exhibiting both photo‐ and thermal responsiveness. The results underscore the potential of selenoacetal polymers in terms of recyclability and selective degradation, making them a valuable addition to conventional covalent adaptable networks.

Closed-Loop Recyclable Poly(ester-disulfide)s for Potential Alternatives to Engineering Plastic.

Facile fabrication, low material complexity and closed-loop recycling are essential for polymer plastics to alter their linear product economy towards a cradle-to-cradle one. Covalent adaptable networks (CANs) are one way to achieve that, which intrinsically exhibit decent mechanical properties like the thermosets but could also be easily recycled like the thermoplastics. In this work, we introduce rigid ester structural motifs into dynamic poly(disulfide)s to form a series of dual polymer networks. Owning to the coherence of soft/rigid segments and the reversible sacrificial crosslinking, they exhibit tailorable mechanical properties and good resistance towards different chemicals. Their closed-loop recycling is achieved via mild solvolysis, maintaining materials' mechanical integrities. It offers a solution as a sustainable replacement for engineering plastics which are massively under production but hard to be recycled.

Closed-Loop Recyclable and Totally Renewable Liquid Crystal Networks with Room-Temperature Programmability and Reconfigurable Functionalities.

Dynamic covalent liquid crystal networks (DCv-LCNs) with straightforward (re)programmability, reprocessability, and recyclability facilitates the manufacture of sophisticated LCN actuators and intelligent robots. However, the DCv-LCNs are still limited to heat-assisted programming and polymer-to-polymer reprocessing/recycling, which inevitably lead to deterioration of the LCN structures and the actuation performances after repeated programming/processing treatments, owing to the thermal degradation of the polymer network and/or external agent interference. Here, a totally renewable azobenzene-based DCv-LCN with room-temperature programmability and polymer-to-monomers chemical recyclability is reported, which was synthesized by crosslinking the azobenzene-containing dibenzaldehyde monomer and the triamine monomer via the dynamic and dissociable imine bonds. Thanks to the water-activated dynamics of the imine bonds, the resultant DCv-LCN can be simply programmed, upon water-soaking at room temperature, to yield a UV/Vis light-driven actuator. Importantly, the reported DCv-LCN undergoes depolymerization in an acid-solvent medium at room temperature because of the acid-catalyzed hydrolysis of the imine bonds, giving rise to easy separation and recovery of both monomers in high purity, even with tolerance to additives. The recovered pure monomers can be used to regenerate totally new DCv-LCNs and actuators, and their functionalities can be reconfigured by removing old and introducing new additives, by implementing the closed-loop polymer-monomers-polymer recycling.

Closed‐Loop Recyclable and Totally Renewable Liquid Crystal Networks with Room‐Temperature Programmability and Reconfigurable Functionalities

AbstractDynamic covalent liquid crystal networks (DCv‐LCNs) with straightforward (re)programmability, reprocessability, and recyclability facilitates the manufacture of sophisticated LCN actuators and intelligent robots. However, the DCv‐LCNs are still limited to heat‐assisted programming and polymer‐to‐polymer reprocessing/recycling, which inevitably lead to deterioration of the LCN structures and the actuation performances after repeated programming/processing treatments, owing to the thermal degradation of the polymer network and/or external agent interference. Here, a totally renewable azobenzene‐based DCv‐LCN with room‐temperature programmability and polymer‐to‐monomers chemical recyclability is reported, which was synthesized by crosslinking the azobenzene‐containing dibenzaldehyde monomer and the triamine monomer via the dynamic and dissociable imine bonds. Thanks to the water‐activated dynamics of the imine bonds, the resultant DCv‐LCN can be simply programmed, upon water‐soaking at room temperature, to yield a UV/Vis light‐driven actuator. Importantly, the reported DCv‐LCN undergoes depolymerization in an acid‐solvent medium at room temperature because of the acid‐catalyzed hydrolysis of the imine bonds, giving rise to easy separation and recovery of both monomers in high purity, even with tolerance to additives. The recovered pure monomers can be used to regenerate totally new DCv‐LCNs and actuators, and their functionalities can be reconfigured by removing old and introducing new additives, by implementing the closed‐loop polymer‐monomers‐polymer recycling.

Mechanistically Different Mechanochromophores Enable Calibration and Validation of Molecular Forces in Glassy Polymers and Elastomeric Networks.

Sterically distorted donor-acceptor π-systems, termed DA springs, can be progressively planarized under mechanical load causing a bathochromic shift of the photoluminescence (PL) spectrum. By combining theory and experiment, we here use a simple linear force calibration for two different conformational mechanochromophores to determine molecular forces in polymers from the mechanochromic shift in PL wavelength during multiple uniaxial tensile tests. Two systems are used, i) a highly entangled linear glassy polyphenylene and ii) a covalent elastomeric polydimethylsiloxane network. The mean forces estimated by this method are validated using known threshold forces for the mechanochemical ring-opening reactions of two different spiropyran force probes. The agreement between both approaches underlines that these DA springs provide the unique opportunity for the online monitoring of local molecular forces present in diverse polymer matrices.

Fusion of immiscible covalent adaptable networks rooted in Enamine-One and β-Amino ester bonds with robust mechanically and excellent re-processing properties

Covalent adaptable networks (CANs) are widely used because of their outstanding mechanical properties and reprocessibility. However, these materials can only be recycled with mono-dynamic bonding networks during recovery. Here, we report that fused polymer CANs containing bi-dynamic bonds with adjustable mechanical properties are achieved through the dynamic behavior of the β-amino ester bond and the enamine-one bond. The β-amino ester bond-based CANs (P1) and the enamine-one bond-based CANs (P5) were prepared using tris(2-aminoethyl)amine (TREN) and m-xylylenediamine (MXDA) with hexanediol diacrylate and hexane-1, 6-diyl dipropiolate via click reaction, respectively. The mechanical and thermal properties of the fused films obtained after grinding and mixing at room temperature were comparable to those of CANs containing bi-dynamic bonds obtained by pre-mixing TREN and MXDA. Dynamic exchange and topological bond formation by the β-amino ester and the enamine-one at the interface are shown at the molecular level and with high uniformity. CANs containing bi-dynamic bonds showed synergism in stress relaxation experiments, demonstrating variable activation energies over a range of the temperature window. Owing to their excellent puncture resistance, the prepared materials can be used in flexible devices, energy-storage equipment, and various other applications.

UV-Mediated Facile Fabrication of a Robust, Fully Renewable and Controllably Biodegradable Poly(lactic acid)-Based Covalent Adaptable Network.

A robust and fully biobased covalent adaptable network (CAN) that allows recyclability, biocompatibility, and controlled biodegradability is reported. The CAN was fabricated through a simple photo-cross-linking method, wherein low-molecular-weight poly(lactic acid) (∼3 kDa) was modified with end 1,2-dithiolane rings through a one-step Steglich esterification reaction with thioctic acid (TA). These incorporated 1,2-dithiolane rings undergo photoinduced ring-opening polymerization, thus enabling the cross-linking of poly(lactic acid) with abundant dynamic disulfide bonds. The resultant CAN demonstrates excellent transparency, effective UV-blocking capabilities below 320 nm, robust tensile strength (∼39 MPa), and superior dimensional stability at 80 °C, alongside attractive biocompatibility. Moreover, owing to the dynamic exchange and redox-responsiveness of disulfide bonds, the material can be recycled by hot-pressing and a reduction-oxidation process while also being capable of controllably biodegrading at the end of its lifecycle. Furthermore, it exhibits reconfigurable shape memory properties with fast recovery. This study elucidates a straightforward approach to fabricating multifunctional and sustainable polymer materials with potential applications in diverse fields such as packaging, coating, and biomedicine.

Withdrawal: Conductive Hydrogel Dressing With High Mechanical Strength for Joint Wound Healing.

Hydrogel wound dressing can accelerate angiogenesis to achieve rapid wound healing, but traditional hydrogel dressings are difficult to meet the repair of joint sites due to their low mechanical strength. Therefore, we constructed the gel system by designing the chemical-physical interpenetrating network structure to achieve high strength and high toughness of the hydrogel. The high-strength double-network hydrogels were synthesized by simple free radical polymerization and low-temperature physicochemical cross-linking in our experiments. The suspension was obtained by green reduction of graphene oxide with carboxymethyl chitosan, followed by the introduction of acrylamide (AM) to form a covalent cross-linked network, which was immersed in ferric chloride solution to form metal ligand bonds, and finally the chemical-physical dual cross-linked network hydrogel wound dressing was prepared. Here, reduced graphene oxide can enhance electrical conductivity and excellent near-infrared photothermal effect to the hydrogel. The cell viability of this novel wound dressing was above 90.0%, its hemolysis rate was below 2.0%, and the electrical conductivity could reach (6.89 ± 0.07 (mS/cm)). In addition, the stress-strain curve demonstrated that the double cross-linked network hydrogel could reach a stress of more than 0.8MPa at 82.0% strain, and the cyclic compression experiment shows that it can still recover its original shape after five times of repeated compression. This work can provide a reference for the exploitation of high mechanical strength hydrogel wound dressings with good electrical conductivity and near-infrared photothermal effect. This article is protected by copyright. All rights reserved.

Closed-Loop Recycling and Upcycling of Fully Biobased Poly(thiourethane) Covalent Adaptable Networks

Closed-Loop Recycling and Upcycling of Fully Biobased Poly(thiourethane) Covalent Adaptable Networks

Design and Continuous (Re)Processing of Thermally Resilient Poly(Styrene-co-Maleic Maleate)-Based Covalent Adaptable Networks

Design and Continuous (Re)Processing of Thermally Resilient Poly(Styrene<i>-co-</i>Maleic Maleate)-Based Covalent Adaptable Networks

Tunable Waterborne Aspartic Acid-Based Covalent Adaptable Networks with Internal Catalysis and Incorporation in Bioinspired Nanocomposites

Tunable Waterborne Aspartic Acid-Based Covalent Adaptable Networks with Internal Catalysis and Incorporation in Bioinspired Nanocomposites

Covalent adaptable polymer networks with CO2-facilitated recyclability

Cross-linked polymers with covalent adaptable networks (CANs) can be reprocessed under external stimuli owing to the exchangeability of dynamic covalent bonds. Optimization of reprocessing conditions is critical since increasing the reprocessing temperature costs more energy and even deteriorates the materials, while reducing the reprocessing temperature via molecular design usually narrows the service temperature range. Exploiting CO2 gas as an external trigger for lowering the reprocessing barrier shows great promise in low sample contamination and environmental friendliness. Herein, we develop a type of CANs incorporated with ionic clusters that achieve CO2-facilitated recyclability without sacrificing performance. The presence of CO2 can facilitate the rearrangement of ionic clusters, thus promoting the exchange of dynamic bonds. The effective stress relaxation and network rearrangement enable the system with rapid recycling under CO2 while retaining excellent mechanical performance in working conditions. This work opens avenues to design recyclable polymer materials with tunable dynamics and responsive recyclability.

Recycling of Commercially Available Biobased Thermoset Polyurethane Using Covalent Adaptable Network Mechanisms.

Until recently, recycling thermoset polyurethanes (PUs) was limited to degrading methods. The development of covalent adaptable networks (CANs), to which PUs can be assigned, has opened novel possibilities for actual recycling. Most efforts in this area have been directed toward inventing new materials that can benefit from CAN theory; presently, little or nothing has been applied to industrially producible materials. In this study, both an industrially available polyol (Sovermol780®) and isocyanate (Tolonate X FLO 100®) with percentages of bioderived components were employed, resulting in a potentially scalable and industrially producible material. The resultant network could be reworked up to three times, maintaining the crosslinked structure without significantly changing the thermal properties. Improvements in mechanical parameters were observed when comparing the pristine material to the material exposed to three rework processes, with gains of roughly 50% in elongation at break and 20% in tensile strength despite a 25% decrease in Young's modulus and crosslink density. Thus, it was demonstrated that theory may be profitably applied even to materials that are not designed including additional bonds but instead rely just on the dynamic urethane bond that is naturally present in the network.

Transparent, Self-Healing, and Recyclable Biomass-Based Covalent Adaptable Networks Formed via Magnolol and Dynamic Boronate Ester

Transparent, Self-Healing, and Recyclable Biomass-Based Covalent Adaptable Networks Formed via Magnolol and Dynamic Boronate Ester

Fast Photoactuation Driven by Supramolecular Polymers Integrated into Covalent Networks

Fast Photoactuation Driven by Supramolecular Polymers Integrated into Covalent Networks

Covalent Adaptable Networks Containing Nitrogen-Coordinated Boronic Ester and Imine Bonds

Covalent Adaptable Networks Containing Nitrogen-Coordinated Boronic Ester and Imine Bonds

Covalent Transition Metal Borosilicides: Reaction Pathways in Molten Salts for Water Oxidation Electrocatalysis.

The properties of transition metal borides and silicides are intimately linked to the covalent character of the chemical bonds within their crystal structures. Bringing boron and silicon together within metal borosilicides can then engender different competing covalent networks and complex charge distributions. This situation results in unique structures and atomic environments, which can impact charge transport and catalytic properties. Metal borosilicides, however, hold the status of unusual exotic species, difficult to synthesize and with poor knowledge of their properties. Our strategy consists of developing a redox pathway to synthesize transition metal borosilicides in inorganic molten salts as high-temperature solvents. By studying the formation of Ni6Si2B, Co4.75Si2B, Fe5SiB2, and Mn5SiB2 with in situ X-ray diffraction, we highlight how new reaction routes, maintaining covalent structural building blocks, draw a general scheme of their formation. This pathway is driven by the covalence of the chemical bonds within the boron coordination framework. Next, we demonstrate high efficiency for water oxidation electrocatalysis, especially for Ni6Si2B. We ascribe the strongly increased resistance to corrosion, high stability, and electrocatalytic activity of the Ni6Si2B-derived material to three factors: (1) the two entangled boron and silicon covalent networks; (2) the ability to codope with boron and silicon an in situ generated catalytic layer; and (3) a rare electron enrichment of the transition metal by back-donation from boron atoms, previously unknown within this compound family. With this work, we then unveil a new chemical dimension for Earth-abundant water oxidation electrocatalysts by bringing to light a new family of materials.

Naturally derived double-network hydrogels with application as flexible adhesive sensors

Hydrogels have been widely used in the biomedical field, including wearable sensors and biological adhesives. However, achieving a balance between various functionalities, such as wet adhesion, stable conductivity, and biocompatibility, in one customized hydrogel has been a challenging issue. In this study, we developed a multifunctional hydrogel comprising recombinant human collagen (RHC) and aldehyde-modified sodium alginate (Ald-alginate), which was primarily crosslinked through a Schiff-base reaction and metal chelation. Due to the combination of a dynamic covalent crosslinking network (imine linkage between RHC and Ald-alginate) and a dynamic ionic crosslinking network (ionic bonding between Ca2+ and Ald-alginate), the hydrogel exhibited excellent self-healing and injectable behaviors. Benefiting from the high Ca2+ content, the hydrogel also attained antifreezing and conductivity properties. In addition to its excellent conductivity and biocompatibility, the hydrogel exhibited strong wet tissue adhesion ability and could adhere rapidly and strongly to the surfaces of various objects or biological tissues, forming a good sealing environment. Moreover, the hydrogel could be directly adhered to a tissue surface as a flexible sensor to accurately detect physiological signals. The versatility of this multifunctional hydrogel will open new avenues for biomedical applications, such as bioadhesives and biosensing.

Rapidly Self-Healable and Melt-Extrudable Polyethylene Reprocessable Network Enabled with Dialkylamino Disulfide Dynamic Chemistry.

Catalyst-free, radical-based reactive processing is used to transform low-density polyethylene (LDPE) into polyethylene covalent adaptable networks (PE CANs) using a dialkylamino disulfide crosslinker, BiTEMPS methacrylate (BTMA). Two versions of BTMA are used, BTMA-S2, with nearly exclusively disulfide bridges, and BTMA-Sn, with a mixture of oligosulfide bridges, to produce S2 PE CAN and Sn PE CAN, respectively. The two PE CANs exhibit identical crosslink densities, but the S2 PE CAN manifests faster stress relaxation, with average relaxation times ∼4.5 times shorter than those of Sn PE CAN over a 130 to 160°C temperature range. The more rapid dynamics of the S2 PE CAN translate into a shorter compression-molding reprocessing time at 160°C of only 5min (vs 30min for the Sn PE CAN) to achieve full recovery of crosslink density. Both PE CANs are melt-extrudable and exhibit full recovery within experimental uncertainty of crosslink density after extrusion. Both PE CANs are self-healable, with a crack fully repaired and the original tensile properties restored after 30min for the S2 PE CAN or 60min for the Sn PE CAN at a temperature slightly above the LDPE melting point and without the assistance of external forces.