Field Coupling Research Articles

A coupling numerical model for simulating groundwater uranium removal in coupling device of electric field and PRB

The remediation of groundwater uranium pollution has been successfully researched and implemented. However, the cost-effectiveness remains challenging to evaluate. Numerical modeling presents a potential solution, while the coupling of multi-physics in uranium pollution remediation has been a global challenge. This study developed a multi-physics coupled model to simulate the evolution of groundwater uranium plumes in composite remediation system, which was composed of permeable reactive barrier (PRB) and electrokinetic remediation (EKR). Meanwhile, pH changes are also taken into account. The research revolved around sandbox dynamic migration experiments, where key parameters were measured for model building. Based on this, a mathematical model for achieving multi field coupling has been proposed. Substitute equations were used to unify the calculation of flow field and electric field into the same dimension. The results showed that the pH variations induced by electrolysis propagate towards the center of the electric field. Medium adsorption of uranium reached its peak when the pH was between 4 and 5. The driving force of groundwater flow in the coupled field was about 3.5 times that of electroosmosis, occupying a dominant position. Electric fields can serve as auxiliary means to delay the migration of uranium. Under ensuring the effective operation of the system for 360 days, the system can save 25 % of PRB thickness with the EKR assistance. The model can not only predict evolution of uranium plume in groundwater, but also calculate the performance and lifespan of composite remediation systems, providing guidance and recommendations for the design of real-site remediation systems.

Dynamic Coupling of Internal Strain Field and Lithium Pathway within Individual Battery Particles in Solid State Batteries

In all-solid-state batteries (ASSBs), (electro)chemo-mechanical aspects such as uneven interfaces, cathode-electrolyte interphase formation, delamination, fracture, defects, etc., are the major factors in capacity fade but remain largely unknown.Nonhomogeneous transfer of lithium ions can cause significant variations in strain and stress within battery electrodes, leading to degradation in battery performance. In all-solid-state batteries (ASSBs), the lithium pathway and the associated strain/stress field become more intricate due to the (electro)chemo-mechanical reaction at the electrode-electrolyte interfaces. The dynamic volume change in active particles are heavily influencing by strength of the solid electrolyte and interfacial conformality. This can continually alter the lithium pathway and the internal stress field, leading to recurrent redefinitions of (electro)chemo-mechanical environment.Here, we have developed an operando coherent X-ray imaging platform and associated analysis methodologies. This technology can track the nanoscale transport of lithium and the strain evolution of individual electrode particles in ASSBs. With this platform, we gained a comprehensive electrochemical and mechanical understanding of the cycling properties of single electrode particles in ASSBs.

Thermal Analysis of Parabolic and Fresnel Linear Solar Collectors Using Compressed Gases as Heat Transfer Fluid in CSP Plants

This study introduces the use of compressed air as a heat transfer fluid in small-scale, concentrated linear solar collector technology, evaluating its possible advantages over traditional fluids. This work assumes the adoption of readily available components for both linear parabolic trough and Fresnel collectors and the coupling of the solar field with Brayton cycles for power generation. The aim is to provide a theoretical analysis of the applicability of this novel solar plant configuration for small-scale electricity generation. Firstly, a lumped thermal model was developed in a MatLab® (v. 2023a) environment to assess the thermal performance of a PT collector with an evacuated receiver tube. This model was then modified to describe the performance of a Fresnel collector. The resulting optical–thermal model was validated through literature data and appears to provide realistic estimates of temperature distribution along the entire collector length, including both the receiver tube surface and the Fresnel collector’s secondary concentrator. The analysis shows a high thermal efficiency for both Fresnel and parabolic collectors, with average values above 0.9 (in different wind conditions). Th5s study also shows that the glass covering of the Fresnel evacuated receiver, under the conditions considered (solar field outlet temperature: 550 °C), reaches significant temperatures (above 300 °C). Furthermore, due to the presence of the secondary reflector, the temperature difference between the upper and the lower part of the glass envelope can be very high, well above 100 °C in the final part of the collector string. Differently, in the case of PTs, this temperature difference is quite limited (below 30 °C).

Effective elastic behavior analysis of three-layer quasicrystal composite plates

In this paper, the effective elastic behavior of three-layer quasicrystal composite plates are forecasted. Firstly, effective properties of the first and third layers quasicrystal composite plates containing ellipsoidal inclusions are obtained according to the Mori-Tanaka model. Secondly, the three-layer composite plates effective behavior parameters are computed by employing the general matrix approach. The numerical examples reveal the influence of the inclusions geometry and volume fraction on the three-layer quasicrystal composite plates effective behavior parameters. The findings indicate that changing the elastic constants of the phason field and phonon-phason coupling field of inclusions will affect the effective behavior parameters of the three-layer quasicrystal composite plates. The increase in layers to some extent reduces the effective behavioral parameters.

Multi-physics field coupling interface lubrication contact analysis for gear transmission under various finishing processes

Surface integrity is crucial for the load-bearing capacity, transmission performance, and service life of gears. Finishing processes can effectively improve surface quality and are widely used in gear manufacturing processes to enhance surface integrity and improve the service performance of gears. Five precision machining tests of form grinding, vibratory finishing, barrel finishing, honing, and abrasive flow machining were conducted on spur gears. High-precision surface integrity characterization methods were used to analyze the surface integrity parameters of the finished gear surfaces, including surface roughness, surface microtopography, residual stress, texture aspect ratio, roughness peak curvature radius. The finishing processes uniformity and effectiveness of the tooth profile surface were also evaluated. By using the finished rough surfaces as inputs and considering the impact of thermal elasto hydrodynamic lubrication on the gear surface, a multi-field coupling contact analysis model encompassing solid, liquid, and thermal fields at the gear meshing interface was established. Lubrication performance parameters such as oil film pressure, oil film thickness, oil film temperature rise, and friction coefficient under various finishing surfaces were compared and analyzed. Experimental results indicate that barrel finishing can simultaneously improve various parameters, such as surface roughness, texture aspect ratio, and compressive residual stress. Finishing processes can effectively reduce surface roughness, improve lubrication performance and reduce the risk of scuffing failure. This approach provided an effective method for the comprehensive evaluation of the effects of various finishing processes. The developed program offers theoretical guidance and data support for the selection and optimization design of gear surface finishing processes.

Superelastic electromechanical behaviors in ferroelectric PbTiO[formula omitted] ceramics under coupled mechanical-electric fields: Higher-order piezoelectric constitutive equations from first-principles

With the recent discovery of superelastic behaviors of ferroelectric (piezoelectric) ceramics, understanding their non-linear mechanical and electromechanical responses under high stress and electric field conditions is crucial for engineering and designing advanced piezoelectric devices, such as ultrasmall actuator systems. In this study, we carry out first-principles finite electric field calculations to clarify the mechanical and electromechanical properties under the electric field for typical ferroelectric ceramics of PbTiO3. Superelastic-like non-linear deformation behavior is enhanced or suppressed depending on the electric field direction, suggesting the possible design of superelasticity. We clarified that positive and negative electric fields to spontaneous polarization promote and inhibit deformation due to strain loading, thereby providing tunable superelasticity. We also investigate the mechanical loading and electric field dependence of the piezoelectric coefficient of PbTiO3. The tunable piezoelectric response can be provided with a coupling of mechanical loading and electric field. Finally, we present higher-order piezoelectric constitutive equations applicable for superelastic-like non-linear deformations under an electric field. The present results will open promising paradigms for functional piezoelectric devices, and the proposed piezoelectric constitutive equations broaden the design scope through finite element method analysis.

A study on the uniformity of hot air drying quality for stacked flake materials based on multi-physical coupling fields

To improve the uniformity of the hot air drying quality for stacked flake materials, a heat and mass transfer study of stacked flake materials drying process based on multi-physical field coupling is carried out. A numerical simulation model of the stacked flake materials is developed based on the multi-physical field coupling theory, and the accuracy of the numerical simulation model is verified by the bidirectional alternating hot air drying test bed. The segmented hot air drying method is used to analyze the influence mechanism of single airflow direction and alternate airflow direction on the heat and mass transfer for stacked flake materials, and the optimization of drying parameters is studied. The results indicate that a single airflow direction may cause excessive drying, and the uneven stacking density significantly affects the drying quality. The increase of air flow direction change number will lead to the improvement of drying uniformity and moisture content of drying results, and at the same time, the flake material absorbs moisture significantly after changing the air flow direction. By adopting the down-down-up-up airflow direction and optimizing the parameters, the moisture content uniformity of the drying results is improved by 19%, while energy consumption is reduced.

Study on the effect of natural fractures and temperature on the wormhole morphology formed by two-phase acidizing in carbonate rocks

The simulation of a two-phase acidizing process coupled with thermal–chemical–fracturing is a complex task, given the presence of natural fractures in carbonate rocks and the influence of temperature on the acid–rock reaction. In this work, we introduce a mixed computational strategy combining the operator splitting and the Newton iteration built upon the embedded discrete fracture model. This innovative strategy is designed to tackle nonlinear problems arising from the coupling of multiphysics fields. The porosity improved region within rock is divided into three parts: the high (H), medium (M), and low (L) efficiency regions, aimed at clearly assessing the impact of various physical fields on acidizing efficiency. The results show that the wormhole morphology is determined by the H and M regions, and the L region determines the acidizing efficiency. The oil in the rock can have a “sealing effect” on the acid, improving the acidizing efficiency. For the large fracture aperture, the wormhole morphology is predominantly influenced by fractures, with the influence diminishing as the aperture decreases. At small apertures, fractures exhibit minimal impact on the morphology. While increasing injection temperature may not significantly alter the wormhole morphology, it can enhance acidizing efficiency. The morphology of wormholes is highly sensitive to multiphase interactions, fractures, and temperature variations. The proposed hybrid computational strategy effectively addresses multiphysics field challenges in two-phase acidizing.

Can specific THz fields induce collective base-flipping in DNA? A stochastic averaging and resonant enhancement investigation based on a new mesoscopic model.

We study the metastability, internal frequencies, activation mechanism, energy transfer, and the collective base-flipping in a mesoscopic DNA via resonance with specific electric fields. Our new mesoscopic DNA model takes into account not only the issues of helicity and the coupling of an electric field with the base dipole moments, but also includes environmental effects, such as fluid viscosity and thermal noise. Also, all the parameter values are chosen to best represent the typical values for the opening and closing dynamics of a DNA. Our study shows that while the mesoscopic DNA is metastable and robust to environmental effects, it is vulnerable to certain frequencies that could be targeted by specific THz fields for triggering its collective base-flipping dynamics and causing large amplitude separation of base pairs. Based on applying the Freidlin-Wentzell method of stochastic averaging and the newly developed theory of resonant enhancement to our mesoscopic DNA model, our semi-analytic estimates show that the required fields should be THz fields with frequencies around 0.28 THz and with amplitudes in the order of 450 kV/cm. These estimates compare well with the experimental data of Titova et al., which have demonstrated that they could affect the function of DNA in human skin tissues by THz pulses with frequencies around 0.5 THz and with a peak electric field at 220 kV/cm. Moreover, our estimates also conform to a number of other experimental results, which appeared in the last couple years.

Jet slipping mechanism and fabricating of composite fiber by multiple field coupling

AbstractThe rotary jet spinning process involves the joint action of centrifugal force, gravity, temperature, humidity, and flow fields on the spinning solution. The solution is ejected through the nozzle after flowing from the storage container and stretched in the air to form a composite fiber. At present, the investigation of rotary jet composite spinning primarily focused on the dynamics and kinematics of the spinning solution and jet within the container. However, there is still a lack of comprehensive exploration into the motion and slip phenomena exhibited by the composite spinning solution in air. This article investigates the slip phenomenon between the polymer and the gas contact surface after the spinning solution leaves the spinneret aperture. A slip model is established to analyze the motion and force of the polymer in air. Meanwhile, a mathematical model for the evaporation rate of composite spinning solution motion under the influence of multi‐field coupling is established through theoretical analysis. A numerical simulation of the rotary jet spinning process was conducted to obtain clouds of jet exit velocity. The morphology of composite fibers produced by rotary jet spinning was analyzed using scanning electron microscopy, enabling a comparison of diameter distribution and surface quality under different environmental and equipment parameters. This study provides a certain reference for the preparation of high‐quality composite fibers.

Investigation of the humidity control in the printing space for the material extrusion of medical biodegradable hydrogel

Materials extrusion for medical biodegradable hydrogel manifests potential for the fabrication of biomimetic functionalized tissues in tissue engineering. However, the uncontrollable shape of 3D printed structures usually leads to shrinkage as well as collapse of the prepared biocompatible scaffold, which limits the potential to develop large-size tissue or organs. Uncontrollable ambient humidity during the 3D printing process is a primary cause of the moisture loss and geometric variation of prepared architectures, which means the humidity in the printing space of hydrogel materials must be controlled accurately throughout the extrusion process. This study proposed a novel configuration of humidity-controlled atmospheric enclosure, by which the humidity distribution in the printing space can be accurately regulated. Subsequently, a fluid-thermal-humidity coupling field simulation model based on the finite element method was established to numerically investigate the humidity field in the printing space. Furthermore, printing trials were conducted with the proposed atmospheric enclosure, and the moisture loss of 3D architecture was avoided. The size of the scaffold was improved evidently from 25 mm(length) × 25 mm(width) × 0.6 mm(height) to 25 mm(length) × 25 mm(width) × 3.5 mm(height).

A Monte Carlo study of Magnetic and thermodynamic behaviors of L[formula omitted] structure like quadrangular frustum pyramid nanoisland

Based on the Monte Carlo simulation, research has been conducted on the magnetic and thermodynamic behaviors of a ferrimagnetic mixed-spin (5/2, 1/2) L10 nanoisland with a like quadrangular frustum pyramid structure. We studied the effects of the magneto-crystal anisotropy and exchange coupling on the magnetization, susceptibility, internal energy, and hysteresis loops. The ferrimagnetic system exhibits more abundant magnetic and thermodynamic behavior than the cubic L10 nanoisland. We found eight saturation values of magnetization, five-loop hysteresis loops, and abrupt transitions in the low-temperature region. In addition, the exchange coupling effect of ferrimagnetism also promotes magnetic properties. Interestingly, in this system, the ferromagnetic exchange coupling (Jaa) and external magnetic field (h) linearly depend on the blocking temperature TB. The hysteresis loops of the system have more magnetization steps, which reflects that it has more ground state spin configurations.

Construction and photothermal properties of Ag–Pt nanoparticles modified hierarchical porous carbon film with ultra-wide infrared spectrum absorption

The rapid development and popularization of infrared detectors have expressed higher and urgent requirements for the light harvesting and photothermal conversion capability of infrared sensitive films. Herein, a hierarchical porous carbon (HPC) derived from polymer carbonization was employed as the porous framework, and then was modified with Pt and Ag particles to construct an efficient photothermal conversion film with ultra-wide infrared spectrum absorption. The light-trapping effect of special porous microstructure, introduction of enormous defects, and intrinsic strong absorption of carbon materials enables the HPC film to holds an absorbance of 72.74 % over the range of 2–20 μm, which could be further improved by about 1.3 times to 94.75 % after Pt and Ag particles (AgPt@HPC) were introduced onto the framework because of the additional plasmon effect and the establishment of complex electric field coupling mechanisms. Moreover, photothermal conversion efficiency of AgPt@HPC film also witnesses a great improvement by about 1.8 times compared with HPC film, and the boosted charge transfer between Ag, Pt and C was confirmed to provides a significant contribution to photothermal conversion. The proposed ultra-wide infrared sensitive film is not only designed for infrared detectors, but also has the potential to provide reference for the development of functionalized photothermal nanomaterials.

Polaritonic states trapped by topological defects

The miniaturization of photonic technologies calls for a deliberate integration of diverse materials to enable novel functionalities in chip-scale devices. Topological photonic systems are a promising platform to couple structured light with solid-state matter excitations and establish robust forms of 1D polaritonic transport. Here, we demonstrate a mechanism to efficiently trap mid-IR structured phonon-polaritons in topological defects of a metasurface integrated with hexagonal boron nitride (hBN). These defects, created by stitching displaced domains of a Kekulé-patterned metasurface, sustain localized polaritonic modes that originate from coupling of electromagnetic fields with hBN lattice vibrations. These 0D higher-order topological modes, comprising phononic and photonic components with chiral polarization, are imaged in real- and Fourier-space. The results reveal a singular radiation leakage profile and selective excitation through spin-polarized edge waves at heterogeneous topological interfaces. This offers impactful opportunities to control light-matter waves in their dimensional hierarchy, paving the way for topological polariton shaping, ultrathin structured light sources, and thermal management at the nanoscale.

Nonlinear dynamic analysis of high-speed precision grinding considering multi-effect coupling

The aerostatic spindle is widely used in the field of precision grinding because of its excellent machining stability and machining accuracy. The spindle is jointly affected by multiple excitation effects in the high-speed grinding process. In order to study the dynamic characteristics of the aerostatic spindle under high-speed precision machining, it is necessary to analyse the nonlinear response of the aerostatic spindle with multi-physical field coupling. In this paper, the nonlinear dynamic model of the aerostatic spindle system under multi-effect coupling is established by considering three aspects: fluid-structure coupling, mass eccentricity excitation coupling, and vibration-grinding force coupling. Firstly, the instantaneous nonlinear air film force excitation is calculated by the derivation of the dynamic air film thickness model with multi-degree-of-freedom vibration responses coupling. The mass eccentricity excitation considering dynamic deflection angle is derived through the eccentric-load relationship. Afterwards, the dynamic precision grinding force model under the full surface of the tool is established based on judging the material removal mode, which considers the grain-workpiece interaction relationship under the influence of the nonlinear vibration. Finally, the accuracy and effectiveness of the coupled model is verified by high-speed precision grinding experiments, and the nonlinear dynamic behaviour under different operating parameters is analysed.

Cavity-Induced Optical Nonreciprocity Based on Degenerate Two-Level Atoms.

We developed and experimentally realized a scheme of optical nonreciprocity (ONR) by using degenerate two-level atoms embedded in an optical ring cavity. For the degenerate transition Fg = 4 ↔ Fe = 3, we first studied the cavity-transmission property in different coupling field configurations and verified that under the strong-coupling regime, the single-dark-state peak formed by electromagnetically induced transparency (EIT) showed ONR. The stable ground-state Zeeman coherence for Λ-chains involved in the degenerate two-level system was found to be important in the formation of intracavity EIT. However, different from the three-level atom-cavity system, in the degenerate two-level system, the ONR effect based on intracavity EIT occurred only at a low probe intensity, because the cavity-atom coupling strength was weakened in the counter-propagating probe and coupling field configuration. Furthermore, ONR transmission with a high contrast and linewidth-narrowing was experimentally demonstrated.

A stepwise multi-stage continuous dielectrophoresis separation microfluidic chip with microfilter structures

The separation of target microparticles using microfluidic systems owns extensive applications in biomedical, chemical, and materials science fields. Integration of microfluidic sorting systems employing dielectrophoresis (DEP) technology has been widely investigated. However, enhancing separation efficiency, purity, stability, and integration remains a pressing issue. This study proposes a stepwise multi-stage continuous DEP separation microfluidic chip with a microfilter structure. By leveraging a stepwise electrode configuration, a gradient electric field is generated to drive target microparticles along the electric field gradient, thereby enhancing separation efficiency. Innovative integration of a microfilter structure facilitates simultaneous filtration and improves flow field distribution, thus enhancing system stability. Through the synergistic effect of stepwise electrodes and the microfilter structure, superior coupling of electric and flow fields is achieved, consequently improving the sorting purity, separation efficiency, and system stability of the DEP-based microfluidic sorting system. Validation through simulation and separation of polystyrene microspheres demonstrates the excellent particle separation performance of the proposed system. It evidently shows potential for seamless extension to various biological microparticle sorting applications, harboring significant prospects in the biomedical domain field.

Energy storage mechanism and modeling method of underground aquifer to meet the demand of large-capacity new energy consumption

With the increasing scale of new energy, the ability to rationally utilize new energy power abandonment has become key to improving the operational efficiency of new power systems in the future. Existing new energy power abandonment consumption methods have problems such as limited consumption capacity and large-scale applications. Therefore, to consume the large-scale power abandonment of new energy and enable it to be stored for a long time, this study proposed a method in which electro-thermal conversion devices are used to convert electric energy into thermal energy, and the energy is stored in an underground aquifer. A finite element numerical analysis model was constructed to analyze and calculate this process. A multi-physical field coupling numerical analysis model, considering the seepage of groundwater and the heat transfer of the heat exchangers and porous media, was constructed by combining the distribution characteristics of power abandonment and a theoretical analysis of the heat transfer principle of an aquifer. A scaled test platform was constructed based on the similarity principle to verify the accuracy of the numerical analysis model. The results of the numerical analysis and simulated test showed that the energy storage system could store power abandonment in the form of thermal energy in the aquifer. At the same time, the annual energy loss of the system is only 14.89%, indicating that the system has long-term storage capabilities. In addition, a comparative analysis of the consumption effects of energy storage systems of different sizes showed that an aquifer energy storage system can be configured according to the capacity of power abandonment. Thus, a large-capacity new energy consumption space can be constructed to realize the complete consumption of power abandonment.

Multi-Physics Coupling in IGBT Modules: A Review

Abstract Since insulated gate bipolar transistor (IGBT) is a core component for power conversion in a power electronic system, guaranteeing the safety of IGBT becomes a crucial task for the maintenance of the power system. However, the mechanism of IGBT failure is a considerably complicated process related to the dynamic process, involving electric, thermal, and force. Hence, understanding the behaviors of IGBT under multi-physics field coupling plays an important role in the design and reliability studies of IGBT. In this paper, we review the multi-physics coupling effects, namely, electric-thermal coupling, thermal-force coupling, and force-electric coupling, inside IGBT devices. The basic principles of each coupling, coupling models, application occasions as well as key issues and development trends are discussed in detail, respectively.

Numerical investigation of thermal damage in rocks under high‐voltage electric pulse

AbstractThe high‐voltage electric pulse fracturing (HVEPF) technology represents a novel and highly promising approach in rock fracturing. The investigation of thermal damage inflicted upon rocks by high‐voltage electrical pulses under multi‐physical field coupling is of great significance in the development of deep geothermal energy. This study establishes a damage model for rocks under electric fragmentation conditions by integrating electric field, heat transfer field, and solid mechanics field. Based on the developed damage model, the insulating properties, temperature variations, and forms of damage of rocks during electric fracturing are explored. Subsequently, the influence of voltage on rock damage status is investigated. The findings reveal that damage to the rock does not occur immediately after electrical breakdown; rather, it increases with the growth of current and temperature within the breakdown channel. Initial damage occurs at the ends of the breakdown channel, followed closely by damage in the central region of the channel. The predominant form of damage in rocks is tensile failure, with shear failure playing a secondary role, and the volume of damage increases with voltage. These results elucidate the characteristics of rock damage during electric fracturing, providing valuable insights for the engineering application of electric fracturing techniques.