Aryl Coupling Research Articles

The Cross-selectivity in Pd-catalyzed coupling of simple aryl C-H bonds

Abstract Pd-catalyzed cross-couplings of C-H bonds have been pursued by researchers to produce unsymmetrical C-C bonds directly for over fifty years, which are currently prepared by Suzuki, Kumada, Stille, Neigishi, Heck, or Sonogashira coupling of C-halogen with C-M or C-H bonds. A big challenge is to obtain the high cross-selectivity of cross-coupling products, especially when the substrates have similar chemical C-H bonds, such as simple arenes. Lu and co-workers have studied Pd catalysis in the cross-couplings of aryl C-H bonds since 2003. This account introduces their strategy, understanding and research in cross-selectivity control, C-H activation mode, cross-coupling establishment and application in synthesis. 1 Introduction 2 Cross-selectivity Control 3 Conclusion

Demonstrating Synergistic Activity of Magnetic Iron Oxide Nano Photocatalyst for C-H Activation in Heterogeneous Phase.

This report describes a dual catalytic approach for the versatile C‒H arylation of arenes under photo-excitation at room temperature. The cooperative catalysis utilizes iron oxide magnetic nanoparticles (which mostly contain Fe3O4 along with some γ-Fe2O3) as the potential photocatalyst, which merges with the Pd-catalyzed C‒H activation cycle for the reductive generation of aryl radical from aryl diazonium salt, revealing its photocatalytic activities. The method is applicable to a wide range of aryl coupling partners and different directing groups, demonstrating excellent productivity, nice co-operativity and recyclability. Adequate control experiments and mechanistic studies assisted in establishing the radical-based mechanism for the C‒H arylation occurring in the heterogeneous phase.

Chemical modification of marigold (Tagetes erecta) dye via diazo-coupling reaction for enhanced dyeing on polyester: A sustainable approach

Plant-derived natural extracts contain large amounts of polyphenolic compounds, presenting opportunities for chemical modification. The present study deals with the extraction of dye from Marigold (Tagetes erecta), a widely cultivated and commercially utilised flower, using water as an extraction medium followed by its chemical modification for sustainable synthesis of yellow dye and dyeing of polyester fabric. Phytochemical analysis and FTIR spectroscopy of the natural dye extract from Marigold flowers indicated the presence of polyphenolic flavonoids. The water-extracted natural dye was subsequently chemically modified with aniline, a primary aryl amine, via diazotisation and coupling reactions to yield a semi-synthetic natural dye with a 1.2 ± 0.3 g yield. The major constituents in the marigold natural extract and the Modified Marigold Extract (MME) dye were characterised using High-Resolution Liquid Chromatography-Mass Spectrometry (LC-HRMS). The marigold water extract contained a high concentration of Gossypetin 8-Glucoside, a yellow-coloured flavonoid compound with a mass-to-charge ratio (m/z) of 480.0904. LC-HRMS analysis further confirmed the presence of a constituent (m/z 424.0485) in the MME dye, corresponding to the predicted mass of chemically modified Gossypetin 8-Glucoside. The MME dye was subsequently employed for dyeing polyester fabric, exhibiting maximum colour strength at 10 % shade under acidic condition. The dyeing performances of the MME-dyed fabrics were evaluated in terms of fastness and post-dyeing strength. This study demonstrates a unique and novel approach to develop a yellow semi-synthetic natural dye, emphasising its potential utility for polyester dyeing.

Kinetics of On-Surface Dechlorinated Aryl–Aryl Coupling

Kinetics of On-Surface Dechlorinated Aryl–Aryl Coupling

Plasmonic-mediated S[sbnd]C arylation and S[sbnd]S coupling on nanostructured silver electrodes monitored by in situ surface-enhanced Raman spectroscopy

Plasmon-mediated chemical reaction (PMCR) is a highly attractive field of research. Here we report in situ surface-enhanced Raman spectroscopic (SERS) monitoring of plasmonic-mediated SS bond-forming reaction. The reaction is thought to be a self-coupling reaction proceeding by photoinduced aromatic SC bond arylation. Surprisingly, the SC arylation and SS coupling are found to be occurred on both partially oxidized silver and silver nanoparticles. The results demonstrated that silver oxide or hydroxide and small molecule donor sacrifice agent played a crucial role in the reaction. This work facilitates the in-situ manipulation and characterization of the active silver electrode interface in conjunction with electrochemistry, and also establishes a promising new guideline for surface plasmon resonance photocatalytic reactions on metal nanostructures with high efficiency.

Base-mediated intramolecular aryl–aryl coupling in pyrazolyl-containing iodolium salts

Pyrazolyl-containing aryliodolium salts undergo transformation to iodopyrazoles accompanied by the formation of a new Csp2–Csp2 bond in the presence of a base (DIPEA, NaOH, or K2CO3). The plausible mechanism of...

Arylation of benzazoles at the 4 positions by activation of their 2-methylsulfinyl groups.

Treatment of 2-methylsulfinylbenzazoles with triflic anhydride in the presence of phenols yields the corresponding 4-(p-hydroxyphenyl)-2-methylsulfanylbenzazoles. This regioselective dehydrative C-H/C-H coupling arylation represents a rare example of functionalizations on the benzene rings of benzo-fused azoles.

Modular synthesis of functional libraries by accelerated SuFEx click chemistry.

Accelerated SuFEx Click Chemistry (ASCC) is a powerful method for coupling aryl and alkyl alcohols with SuFEx-compatible functional groups. With its hallmark favorable kinetics and exceptional product yields, ASCC streamlines the synthetic workflow, simplifies the purification process, and is ideally suited for discovering functional molecules. We showcase the versatility and practicality of the ASCC reaction as a tool for the late-stage derivatization of bioactive molecules and in the array synthesis of sulfonate-linked, high-potency, microtubule targeting agents (MTAs) that exhibit nanomolar anticancer activity against multidrug-resistant cancer cell lines. These findings underscore ASCC's promise as a robust platform for drug discovery.

Nickel-Catalyzed Migratory Cross-Coupling Reactions: New Opportunities for Selective C-H Functionalization.

ConspectusMigratory cross-coupling via metal migration is a process of significant academic and industrial interest. It provides an attractive alternative for the selective installation of a functional group at remote C-H positions from simple precursors, thus enabling the direct synthesis of challenging structures not accessible with traditional cross-coupling. In particular, with the merger of 1,n-Ni/H shift and cross-coupling of nickel, the Ni-catalyzed migratory functionalization of simple precursors has undergone particularly intense development and emerged as a valuable field of research in the past few years. This Account will outline the recent progress made in this arena in terms of migration-functionalization modes, diverse functionalizations, and strategies for regio- and stereocontrol. Mechanistic studies and synthetic applications are also discussed.In detail, we systematically categorize our work into two parts based on the migration modes. In the first part, a platform is created for Ni-catalyzed migratory sp3 C-H functionalization of alkenes or alkyl halides via iterative 1,2-Ni/H shift-selective cross-coupling. The key reactive Ni(II)H species for chain-walking could be generated in situ either in a polarity-reversed fashion relying on stoichiometric reductants (X-Ni(II)-H) or in a redox-neutral fashion with the participation of nucleophilic coupling partners (FG-Ni(II)-H). One significant advantage associated with the polarity-reversed NiH system is the use of relatively stable, abundant, and safe olefin surrogates or alkyl halides instead of the sensitive organometallics required in traditional cross-coupling reactions. Another advantage is that diverse functionalizations, including carbonation and more challenging amination and thiolation could be smoothly achieved with suitable electrophiles or their precursors. Finally, to address the challenging multifaceted selectivity and reactivity issues in asymmetric migratory cross-coupling reactions, we have developed a feasible ligand relay catalytic strategy. In this dynamic ligand exchange process, one ligand promotes rapid migration while the other promotes highly regio- and stereoselective coupling. This innovative strategy overcomes the formidable challenge stemming from the difficulty of designing a single ligand to efficiently promote both steps of chain-walking and asymmetric coupling. In the second part, a new platform for Ni-catalyzed migratory sp2 C-H functionalization via 1,4-Ni/H shift-selective cross-coupling has been reported. Starting from readily available aryl or vinyl coupling partners, the in situ-generated aryl- or vinylnickel(II) species could undergo a rapid and reversible 1,4-Ni/H shift along an sp2 backbone, and subsequent selective coupling with various coupling partners would allow regio- and stereoselective access to diverse 1,4-migratory functionalization products. The key to success was the discovery of an appropriate ligand to efficiently promote both migration and subsequent selective cross-coupling. A vinyl-to-aryl 1,4-Ni/H shift successfully enables the modular ipso/ortho difunctionalization of aryl coupling partners, while an aryl-to-vinyl 1,4-Ni/H shift enables regio- and stereoselective access to functionalized trisubstituted alkenes.We hope that this Account will inspire broad interest and future development of migratory cross-coupling reactions. We strongly believe that continued efforts in this fascinating field will overcome many of the remaining challenges, including cutting-edge ligand/catalyst design to enhance reactivity and selectivity, conceptually new migration modes for additional transformations, and in-depth mechanistic studies for rational reaction design.

Novel Biocatalysts from Specialized Metabolism

AbstractEnzymes are increasingly recognized as valuable (bio)catalysts that complement existing synthetic methods. However, the range of biotransformations used in the laboratory is limited. Here we give an overview on the biosynthesis‐inspired discovery of novel biocatalysts that address various synthetic challenges. Prominent examples from this dynamic field highlight remarkable enzymes for protecting‐group‐free amide formation and modification, control of pericyclic reactions, stereoselective hetero‐ and polycyclizations, atroposelective aryl couplings, site‐selective C−H activations, introduction of ring strain, and N−N bond formation. We also explore unusual functions of cytochrome P450 monooxygenases, radical SAM‐dependent enzymes, flavoproteins, and enzymes recruited from primary metabolism, which offer opportunities for synthetic biology, enzyme engineering, directed evolution, and catalyst design.

On-surface synthesis of nitrogen-doped nanographene with an [18]annulene pore on Ag(111)

On-surface synthesis is of importance to fabricate low dimensional carbon-based nanomaterials with atomic precision. Here, we synthesize nitrogen-doped nanographene with an [18]annulene pore and its dimer through sequential reactions of debromination, aryl–aryl coupling, cyclodehydrogenation and C–N coupling on Ag(111) from 3,12-dibromo-7,8-diaza[5]helicene. The inner structures of the products were characterized with scanning tunneling microscopy with a CO terminated tip at low temperature. Furthermore, the first four unoccupied electronic states of the nanographene were investigated with a combination of scanning tunneling spectroscopy and theoretical calculations. Except for the LUMO + 2 state observed at +1.3 V, the electronic states at 500 mV, 750 mV and 1.9 V were attributed to the superatom molecular orbitals at the [18]annulene pore, which were significantly shifted towards the Fermi level due to the hybridization with the confined surface state.

Palladium-Catalyzed C-N Coupling in the Synthesis of 1,4-Benzodiazepines Fused with 5-Membered Carbo- and Heterocycles

Abstract: In this review, we have focused our attention on Pd-catalyzed amination and arylation reactions for the construction of various benzodiazepine scaffolds. It includes numerous types of synthetic strategies like C-H arylation, Pd-catalyzed carbonylation, and Buchwald Hartwig coupling. To synthesize different functionalized benzodiazepines, the domino processes as intra- or intermolecular reactions are developed as an eco-friendly and effective tool. Benzodiazepines exhibit several biological activities and play a valuable role in medicinal and pharmaceutical chemistry. This review article mainly focuses on synthesizing a 1,4- benzodiazepine nucleus fused with 5-membered carbo- and heterocycles in the presence of palladium catalysts.

Photoinduced Cobalt Catalysis for the Reductive Coupling of Pyridines and Dienes Enabled by Paired Single-Electron Transfer.

Selective hydroarylation of dienes has potential to provide swift access to useful building blocks. However, most existing methods rely on dienes stabilised by an aromatic group and transmetallation or nucleophilic attack steps require electron-rich aryl coupling partners. As such, there are few examples which tolerate wide-spread heteroarenes such as pyridine. Whilst allylic C-H functionalisation could be considered an alternative approach, the positional selectivity of unsymmetrical substrates is hard to control. Here, we report a general approach for selective hydropyridylation of dienes under mild conditions using metal catalysed hydrogen-atom transfer. Photoinduced, reductive conditions enable simultaneous formation of a cobalt-hydride catalyst and the persistent radical of easily-synthesised pyridyl phosphonium salts. This facilitates selective coupling of dienes in a traceless manner at the C4-position of a wide-range of pyridine substrates. The mildness of the method is underscored by its functional group tolerance and demonstrated by applications in late-stage-functionalization. Based on a combination of experimental and computational studies, we propose a mechanistic pathway which proceeds through non-reversible hydrogen atom transfer from a cobalt hydride species which is uniquely selective for dienes in the presence of other olefins due to a much higher relative barrier associated with olefin hydrogen-atom-transfer (HAT).

Photoinduced Cobalt Catalysis for the Reductive Coupling of Pyridines and Dienes Enabled by Paired Single‐Electron Transfer**

AbstractSelective hydroarylation of dienes has potential to provide swift access to useful building blocks. However, most existing methods rely on dienes stabilised by an aromatic group and transmetallation or nucleophilic attack steps require electron‐rich aryl coupling partners. As such, there are few examples which tolerate wide‐spread heteroarenes such as pyridine. Whilst allylic C−H functionalisation could be considered an alternative approach, the positional selectivity of unsymmetrical substrates is hard to control. Here, we report a general approach for selective hydropyridylation of dienes under mild conditions using metal catalysed hydrogen‐atom transfer. Photoinduced, reductive conditions enable simultaneous formation of a cobalt‐hydride catalyst and the persistent radical of easily‐synthesised pyridyl phosphonium salts. This facilitates selective coupling of dienes in a traceless manner at the C4‐position of a wide‐range of pyridine substrates. The mildness of the method is underscored by its functional‐group tolerance and demonstrated by applications in late‐stage functionalisation. Based on a combination of experimental and computational studies, we propose a mechanistic pathway which proceeds through non‐reversible hydrogen‐atom transfer (HAT) from a cobalt hydride species which is uniquely selective for dienes in the presence of other olefins due to a much higher relative barrier associated with olefin HAT.

Noncovalent Modification of Cycloparaphenylene by Catenane Formation Using an Active Metal Template Strategy**

AbstractThe active metal template (AMT) strategy is a powerful tool for the formation of mechanically interlocked molecules (MIMs) such as rotaxanes and catenanes, allowing the synthesis of a variety of MIMs, including π‐conjugated and multicomponent macrocycles. Cycloparaphenylene (CPP) is an emerging molecule characterized by its cyclic π‐conjugated structure and unique properties. Therefore, diverse modifications of CPPs are necessary for its wide application. However, most CPP modifications require early stage functionalization and the direct modification of CPPs is very limited. Herein, we report the synthesis of a catenane consisting of [9]CPP and a 2,2′‐bipyridine macrocycle as a new CPP analogue that contains a reliable synthetic scaffold enabling diverse and concise post‐modification. Following the AMT strategy, the [9]CPP‐bipyridine catenane was successfully synthesized through Ni‐mediated aryl‐aryl coupling. Catalytic C−H borylation/cross‐coupling and metal complexation of the bipyridine macrocycle moiety, an effective post‐functionalization method, were also demonstrated with the [9]CPP‐bipyridine catenane. Single‐crystal X‐ray structural analysis revealed that the [9]CPP‐bipyridine catenane forms a tridentated complex with an Ag ion inside the CPP ring. This interaction significantly enhances the phosphorescence lifetime through improved intermolecular interactions.

Computational and theoretical chemistry of newly synthesized and characterized 2,2’-(5,5’-(1,4-phenylene)bis(1H-tetrazole-5,1-diyl))bis-N-acetamides

Energetic heterocycles, including pyridines, triazoles, and tetrazoles, exhibit greater density, heats of formation, and oxygen balance compared to their carbocyclic counterparts, making them a promising approach for synthesizing novel bis-tetrazole acetamides. Synthesized compounds A-F, some of which feature a chlorine atom attached to the phenyl ring, serve as valuable synthons for aryl coupling reactions. Analysis via 1H-NMR and 13C-NMR spectroscopy, as well as density functional considerations through B3LYP functional correlation with 6-311 + + G(d) and 6-31G(d) basis set, revealed the observed LUMO/HOMO energies and charge transfer within the molecule. Additionally, the dipole moment, chemical hardness, softness, ionization potential, local reactivity potential via Fukui indices and thermodynamic properties (entropy, enthalpy, and Gibbs free energy) of the molecule were calculated through density functional theory studies. In addition, Molecular Docking studies were conducted to investigate the anti-cancer potential of synthesized heterocyclic compounds against caspase 3, NF-KAPPA-B and P53 protein. Molecular docking analysis demonstrated a potent interaction between 2,2’-(5,5’-(1,4-phenylene)bis(1H-tetrazole-5,1-diyl))bis-N-(2,4-dinitrophenyl) acetamides (6d) and TP53 and NF-KAPPA-B with binding energies of − 11.8 kJ/mol and − 10.9 kJ/mol for TP53 and NF-KAPPA-B, respectively. Similarly, 2,2’-(5,5’–(1,4-phenylene)bis(1H-tetrazole-5,1-diyl))bis-N-(2-chlorophenyl) acetamides (6f) exhibited a strong interaction with caspase-3 with binding energy of -10.0 kJ/mol, indicating their potential as therapeutic agents against these proteins. Furthermore, the findings of current study was further strengthen by 100 ns molecular dynamics (MD) simulations. Finally, theoretical studies of oxygen balance and nitrogen percentage suggest that these molecules can be utilized as energetic materials.Graphical

Broad-Scope Amination of Aryl Sulfamates Catalyzed by a Palladium Phosphine Complex.

Among phenol-derived electrophiles, aryl sulfamates are attractive substrates since they can be employed as directing groups for C-H functionalization prior to catalysis. However, their use in C-N coupling is limited only to Ni catalysis. Here, we describe a Pd-based catalyst with a broad scope for the amination of aryl sulfamates. We show that the N-methyl-2-aminobiphenyl palladacycle supported by the PCyp2ArXyl2 ligand (Cyp = cyclopentyl; ArXyl2 = 2,6-bis(2,6-dimethylphenyl)phenyl) efficiently catalyzes the C-N coupling of aryl sulfamates with a variety of nitrogen nucleophiles, including anilines, primary and secondary alkyl amines, heteroaryl amines, N-heterocycles, and primary amides. DFT calculations support that the oxidative addition of the aryl sulfamate is the rate-determining step. The C-N coupling takes place through a cationic pathway in the polar protic medium.

Suzuki–Miyaura Coupling of Aryl Nosylates with Diethanolamine Boronates

AbstractDiethanolamine boronates (DABO boronates) have gained popularity as substrates for Suzuki–Miyaura couplings due to their ease of handling as crystalline, bench-stable solids. Similarly, 4-nitrobenzenesulfonate esters (nosylates), derived from the parent phenols, also possess the advantage of being highly crystalline and stable. Herein, we describe the development of suitable reaction conditions for the Suzuki–Miyaura cross-coupling of DABO boronates with aryl and heteroaryl nosylates.

Generation of copper fluoroalkyl complexes (CuRFLn) from chlorotrifluoroethylene and −RF transfer to aroyl chlorides

Given the importance of fluorinated drugs and agrochemicals, fluoroalkylation of organic electrophiles that can be performed at a late stage of chemical synthesis has attracted a flurry of contributions. New fluoroalkyl groups can be obtained by insertion of fluoroalkenes into Cu–H bonds. Chlorotrifluoroethylene undergoes regioselective insertion in its reaction with Stryker's reagent, [CuH(PPh3)]6 and triphos to give [Cu(CFClCF2H)(μ−κ1,κ2-triphos)]2, which mediates the fluoroalkylation of several aroyl chlorides (triphos = bis(2-diphenylphosphinoethyl)-phenylphosphine). In contrast, attempted −RF transfer to aryl iodides instead affords aryl–aryl coupling products.

Direct Arylation Synthesis of Small Molecular Acceptors for Organic Solar Cells.

In recent years, small molecular acceptors (SMAs) have extensively promoted the progress of organic solar cells (OSCs). The facile tuning of chemical structures affords SMAs excellent tunability of their absorption and energy levels, and it gives SMA-based OSCs slight energy loss, enabling OSCs to achieve high power conversion efficiencies (e.g., >18%). However, SMAs always suffer complicated chemical structures requiring multiple-step synthesis and cumbersome purification, which is unfavorable to the large-scale production of SMAs and OSC devices for industrialization. Direct arylation coupling reaction via aromatic C-H bonds activation allows for the synthesis of SMAs under mild conditions, and it simultaneously reduces synthetic steps, synthetic difficulty, and toxic by-products. This review provides an overview of the progress of SMA synthesis through direct arylation and summarizes the typical reaction conditions to highlight the field's challenges. Significantly, the impacts of direct arylation conditions on reaction activity and reaction yield of the different reactants' structures are discussed and highlighted. This review gives a comprehensive view of preparing SMAs by direct arylation reactions to cause attention to the facile and low-cost synthesis of photovoltaic materials for OSCs.