Coupling Conditions Research Articles

Monthly impact of the Scandinavian pattern on winter surface air temperature over Asia

This study employs the ERA5 and JRA-55 monthly reanalysis datasets to examine the monthly impact of the Scandinavian (SCA) teleconnection pattern on the surface air temperature (SAT) over Asia in boreal winters from 1958 to 2021. We demonstrate that the monthly impacts of the SCA vary by month and region. Notably, the accumulated SAT anomalies over the region to the north of Tibetan Plateau (NP) due to the SCA tend to propagate southward to the eastern China (EC) during late winter, which is associated with the gradually intensifying westward gradient of the air temperature over the EC. Furthermore, both the November and January SCA patterns can significantly cause one-month-lagged SAT anomalies over the NP, albeit through different mechanisms. For the November SCA pattern, it induces significant snowfall anomalies over the NP and the associated snow cover anomalies can persist until December, facilitating the formation of local significant SAT anomalies via anomalous sensible heat flux. In contrast, from January to February, the background states for the air temperature in the lower troposphere and absolute vorticity in the upper troposphere change in such a way that creates a more favorable condition for the vertical coupling between the upper and lower circulation anomalies associated with the SCA pattern. Consequently, the SCA pattern tends to persist from January to February, leading to significant SAT anomalies over both the NP and EC in February.

Computational fluid dynamics driven surrogate model to predict hydrodynamic and acoustic properties of propeller boss cap fins

A novel method is proposed to predict the hydrodynamic and acoustic properties of propeller boss cap fins (PBCF) based on computational fluid dynamics (CFD) and surrogate models. The propulsive performance and radiated noise of the B-series propeller equipped with PBCF under open-water and hull-propeller coupling conditions are predicted and analyzed. The transient calculations are performed to generate accurate sample data for the surrogate model based on the Unsteady Reynolds Averaged Navier–Stokes and Ffowcs Williams-Hawkings equations. The response surface, polynomial, and Kriging models are used to learn sample data and output predictions. The relationship between inputs and outputs can be established from local data, which enables to obtain arbitrary response results in the global range. The hydrodynamic performance and radiated noise are compared for configurations with and without PBCF. PBCF improves the open-water efficiency by more than 1.5% at medium to high advance velocities. For the self-propulsion efficiency, over 5% improvement is achieved under ideal working conditions. In addition, PBCF has a directional effect on the radial and axial radiated noise, with better noise reduction in the axial direction. The difference between the axial and radial spectrums is significant, especially near the first blade passing frequency.

3D package thermal analysis and thermal optimization

3D packaging mainly uses TSVs (Through Silicon via) to vertically interconnect multiple chips, achieving the purpose of signal transmission and electrical connection. As a popular advanced packaging method, its research is of great significance. Although stacked chips can achieve stronger performance in smaller spaces, they can also cause a series of reliability issues, among which thermal stress and warping due to differences in the thermal expansion coefficients of materials can even lead to chip failure. Therefore, it is highly valuable to simulate and analyze the entire 3D packaging model.In this study, the thermal stress and deformation of the whole three-dimensional package model were simulated by finite element analysis. The results showed that there were significant stress and deformation effects at the joint of the TSV structure at normal temperature, and the stress and deformation reached 209.99MPa and 0.0018519mm, respectively. After that, the temperature of the double-sided package system containing 3D package under electrothermal coupling conditions was optimized by heat dissipation design, which verified the ‘quantity first’ scheme of heat dissipation fins and reduced the temperature by 40%.

Static voltage stability analysis of integrated smart energy systems

The analysis of multi-energy flows forms the cornerstone for the study of state estimation, safety assessment, and optimization in integrated smart energy systems (ISES). The interactions between various energy flows and the inherent variability of renewable energy sources often lead to significant challenges to the static stability of ISES. This paper investigates the static voltage stability of ISES under multi-energy coupling conditions through multi-energy flow analysis in electric-gas-thermal energy systems. First, a steady-state model of the ISES is constructed by representing the interconnected energy subsystems as equivalent sources and loads in the power grid. Subsequently, through the coupling elements of ISES, the power flows of the natural gas system (NGS) and the district heating system (DHS) are converted into active power in the electrical power system (EPS), resulting in an equivalent power flow equation for the ISES. Then, using Brouwer’s fixed-point theorem, the analytical sufficient conditions for solving the equivalent power flow equation are derived. Finally, a simulation model based on MATLAB/Simulink is established. The steady-state criterion for ISES is obtained in this paper, and the correctness and effectiveness of the proposed conclusions are verified by the simulation results.

Role of cavity strong coupling on single electron transfer reaction rate at electrode-electrolyte interface.

The physicochemical properties of molecules can be modulated through polariton formation under strong electromagnetic confinement. Here, we discuss the possibility of exploiting this phenomenon to increase the electron transfer rate at an electrode-electrolyte interface. Electron transfer theory under strong electromagnetic confinement can be extended to the electrode-electrolyte interface, and single-electron transfer reactions can be simulated using Gerischer's theory. Although single electron transfer in free space is well described using Marcus theory, the vacuum electric field can facilitate an additional electron transfer pathway via virtual photon excitation under cavity strong coupling conditions. Therefore, this binary reaction pathway for single electron transfer can yield a quasi-two-particle electron transfer process. This quantum behavior can dominate when the mode volume is small and when there are a large number of molecules in the vacuum electric field. Exploitation of polaritons in single electron transfer reactions can lead to enhanced electrochemical energy conversion systems.

Influences of thickness and coupled water-temperature-load effects on adhesion/cohesion properties of mastic and mortar in porous asphalt mixtures

ABSTRACT The thickness of the mastic and mortar is randomly distributed in porous asphalt mixtures and has a critical influence on the adhesion/cohesion properties of the mastic and mortar. An advanced pull-off test, combined with a coupled effect tester, was designed to evaluate the adhesion/cohesion properties of mastic and mortar. Pull-off tensile strength (POTS) of mastic and mortar firstly increased then decreased with the increasing thickness of mastic and mortar. The failure mode of mastic changed from brittle adhesive failure to adhesive failure, while the failure mode of mortar changed from cohesive failure to adhesive failure with increasing thickness under dry conditions. However, adhesive failure was found in all thicknesses under coupled effects. As coupled effects increased, POTS and fracture energy of mastic and mortar prominently decreased. The failure modes of mastic and mortar changed from adhesive failure to cohesive failure with temperature increase. A water pressure of 0.2 MPa is critical where POTS dramatically decreases. With increasing coupled effect duration, failure modes of mastic changed from adhesive failure to brittle adhesive failure, while failure modes of mortar show brittle adhesive failure. High-viscosity modified asphalt greatly improved the POTS of mastic and mortar under dry and coupled effect conditions.

Numerical investigation on the polarization-dependent light extraction of 275-nm AlGaN based nanowire with bowtie antenna array or passivation layer

Abstract The low light extraction efficiency (LEE) is one of the major factors hindering the application of AlGaN based deep ultraviolet (DUV) light-emitting diodes (LEDs). Here we investigate the LEE of AlGaN based nanowire (NW) DUV LEDs emitting at 275 nm for bare NW, NW integrated with aluminum (Al) bowtie antenna array, and NW with passivation layer under transverse-electric (TE) and transverse-magnetic (TM) polarization. It is observed that by integrating plasmonic Al bowtie antenna array with AlGaN based NW, the LEE up to 83% and 74% can be achieved under TE and TM polarization. In addition, the effect of the three different passivation layer SiO2, SiNx and AlN on the LEE of AlGaN based NW is also analysed, the results suggests that SiO2, which has smaller refractive index than NW core, could extract more photons from the NW and lead to large enhancement of LEE. For SiNx and AlN passivation layer, which has refractive index similar to the NW core, have strong coupling with the NW core, when the thickness of passivation layer satisfy resonance coupling conditions, the LEE could be achieved more than 80% for both TE and TM polarization. These integrated NW/antenna array and NW with passivation layer system can provide guidelines for designing other nano-photonic devices.

A dual‐excitation inductive power transfer system with decoupled transformer for high misalignment tolerance

AbstractThis study delves into the design and optimization of a 4 kW dual‐excitation inductive power transfer system designed to accommodate large misalignments. The system utilizes a bipolar‐solenoid inductive coupled transformer as its coupling mechanism. Detailed simulation and analysis of this coupling mechanism are conducted. Additionally, the system employs a control strategy aimed at optimizing the coordination between output power and efficiency. This control strategy dynamically adjusts the power of the two transmitters, aiming to enhance system efficiency to the maximum extent possible under favourable coupling conditions. Moreover, it ensures that the system's output power remains at or above the rated value even when coupling conditions deteriorate. During the experiment, the system can optimize the output power and efficiency at the same time by using a suitable control strategy when the coils are misaligned. Meanwhile, the system can achieve a minimum efficiency of 81.5% even when the misalignment distance reaches 300 mm (60% of per transmitting coil size). The system and control strategy proposed in this paper can effectively overcome the deterioration of the output characteristics of the wireless power transfer system when misalignment occurs.

Mechanically Induced Green Targeted Conversion of Ammonia Nitrogen to N2: Based on Cavitation Effects and ROS Oxidation.

Addressing the mounting challenge of ammonia nitrogen pollution in aquatic ecosystems necessitates the selective oxidation of ammonia nitrogen to nitrogen gas, a pivotal aspect of eco-friendly nitrogen removal processes. Ultrasound cavitation, renowned for its capacity to generate reactive oxygen species (ROS), has garnered considerable attention in environmental remediation. This study reveals a highly synergistic mechanism in ultrasound coupled stirring (US-ST), establishing optimal coupling conditions through sound field monitoring and quantification of ROS. In comparison to ultrasound treatment alone (US), the sound pressure amplitude significantly increased from ±18 to ±30 kPa in US-ST, markedly reducing the cavitation nucleation threshold and augmenting the steady-state concentration of hydroxyl radicals (HO•) by 13-fold. Further, with appropriate charge transfer conditions enabled by the acoustoelectric characteristics of the passive film on stirring paddles, the concentrations of superoxide (•O2-) and singlet oxygen (1O2) elevated to 9.54 × 10-10 M and 8.43 × 10-13 M, respectively. Under the regulation of 500 rpm stirring vortex, a maximum sonochemical efficiency of 6.5 × 105 mg J-1 was achieved. In the context of domestic wastewater, ammonia nitrogen degradation was achieved through the oxidation and thermal dissociation effects of US-ST. The concentration decreased from 27.5 to 3.4 mg/L after 2 h, with an impressive N2 selectivity of 96.8%. This study elucidates the targeted conversion mechanism of ammonia nitrogen in US-ST, introducing an emerging water treatment technology propelled by mechanical energy.

Mitigating interface damping of metal adhesion layers of nanostructures through bright-dark plasmonic mode coupling

Metal (such as Cr, Ti, etc.) adhesion layers, which are generally used to prevent nanostructures from falling off during electron beam lithography processes, will introduce interface damping, decrease the near-field enhancement, and shorten the dephasing time of localized surface plasmons (LSP). Maintaining metal adhesion layers while alleviating the induced interface damping in nanostructures is crucial for high-performance sensing, surface-enhanced Raman scattering elements, plasmon-based photocathodes, and plasmon-mediated catalysis. Here, we experimentally demonstrated that the mitigation of interface damping of metal adhesion layers can be achieved through the coupling between the bright and dark plasmonic modes of gold nanorods. We attribute the mitigation to stronger confinement across the plasmon energy, which effectively reduces the proportion of plasmon energy injected into the Cr adhesive layers. Compared to weak coupling, the non-radiative damping of plasmonic modes 1 and 2 is reduced by approximately 74% and 85%, respectively, under strong coupling conditions. The experimental results are supported by finite-difference time-domain simulations and are well explained by the calculated interaction potential for different gap sizes. This research will further benefit applications where low interface damping is required, such as the construction of low-threshold nanolasers and ultrasensitive sensing systems.

Study on the decay laws and deterioration mechanism of mechanical properties of cement-stabilized gravel under water-heat-salt coupled conditions

A new type of asphalt pavement disease, known as arch expansion, has appeared in the saline soil regions of Northwest China. The emergence, as well as the evolution of the disease, is strongly related to the distribution of sulfate. However, the decay of Cement-stabilized gravel (CSG) mechanical properties is closely related to the onset and development of arch expansion. The relationship between CSG mechanical strength and salinity in the arch expansion area is analyzed based on field investigations to systematically study the mechanical property degradation law and mechanism of CSG. The mechanical strength and deterioration patterns of CSG with different coupling conditions were investigated. The mineral composition and micromorphology of the erosion products were analyzed. The results show that the mechanical properties of CSG in the area of the arch deteriorate more than those in the regular section. The mechanical strength of the specimens initially containing salt and partially immersed in salt solution decayed most severely. In terms of the deterioration mechanism of mechanical strength of CSG, the water-heat-salt erosion process is also divided into two parts, including the formation stage of gypsum and ettringite, the stage of C-S-H decomposition and thaumasite formation, respectively. The degradation mechanism of CSG is a combination of physical and chemical erosion.

Localized Stochastic Dynamic Solution for Laminated Coupled Open Conical-Cylindrical Cabin System Based on the Condensation Method

This paper proposed a technical solution for quickly and accurately solving the stochastic dynamic characteristics of laminated coupled open conical-cylindrical cabin system. On the basic of first-order shear deformation theory (FSDT), the two-dimensional spectral Chebyshev method was introduced to obtain a unified dynamic matrix that included laminated conical and cylindrical panels. The middle part of the cabin was selected as the target substructure, while the precise dynamic condensation theory was used as a tool to establish a local dynamic analysis model of the cabin system based on comprehensive consideration of complex boundary conditions, coupling conditions, random load excitation and other factors. From a numerical analysis perspective, the local-level dynamic responses obtained from the model were validated to match well with the global-level results from the finite element method. Based on this numerical validation, a dynamic parametric analysis scheme was proposed, focusing on the local dynamic characteristics of the target substructure. This scheme analyzed the impact of the structural parameters of the middle part of cabin on the dynamic behaviors of the cabin system, providing technical guidance for the design optimization of the cabin system in engineering applications.

Co-vulcanization of natural rubber and Eucommia ulmoides gum for mediation of the nonlinear rheology behaviors

Co-vulcanization of natural rubber (NR) and high-moduli Eucommia ulmoides gum (EUG) is promising while the reduction in crystallinity of crosslinked EUG is adverse for developing high-performance materials. Proposed herein is a novel method to prepare high-strength and high-stretchability NR/EUG vulcanizates with rapid vulcanization of EUG into slightly crosslinked particles, followed by further vulcanization of NR to form crosslinked matrix network. Deep eutectic solvents (DESs) are employed to facilitate the vulcanization of EUG during its blending with NR. The two-step vulcanization results in vulcanizates exhibiting superior mechanical properties under shear, tensile, and compressive conditions, significantly exceeding those of vulcanizates prepared by traditional processing methods. The reinforcement mechanism is elucidated by controlling thermomechanical coupling conditions and is supported by comprehensive structural characterizations. It is suggested that the EUG crystalline regions, maintained through the special processing method, work in conjunction with the stress-induced crystallization of the matrix to enhance the vulcanizates, nearly doubling the deformation stress at 800% strain. The crystalline regions can mediate the deformation stress during shear and compression and weaken nonlinear rheological behavior. The established structure-performance relationship is guidable for preparing high-performance NR/EUG blend vulcanizates.

Stability Analysis of Electromagnetic Suspension Systems Coupled with Flexible Frames: Modeling, Control, Analysis and Experimentation

The stability of the suspension is a key challenge for the application and promotion of electromagnetic suspension technology, especially when it operates in conjunction with a flexible structure, which significantly increases the system's complexity. This paper abstracts the characteristics of the coupling conditions between an electromagnetic suspension system and a flexible structure and designs and constructs an experimental apparatus that includes an electromagnet and a simulated flexible structure with adjustable stiffness and inertia. Based on the Lyapunov method, the central manifold theorem, and the Poincaré method, the stability of the electromagnetic suspension system and the conditions for Hopf bifurcations are derived. Finally, through reasonable experimental design and data analysis, the correctness of the theoretical analysis conclusions is validated, providing references for the engineering applications of electromagnetic suspension systems.

Creep behavior of BFRP-confined coal gangue concrete under sulfate and high stress conditions

To recycle the coal gangue more economically and effectively, the basalt fiber reinforced polymer (BFRP) and coal gangue concrete (CGC) are combined to form a novel supporting structure in the underground mines, BFRP-confined CGC (FCGC). However, the underground mine environment is rich in sulfate corrosive ions, and meanwhile, the structure is subjected to a high sustained load. Thus, this paper presents an experimental and theoretical investigation on the long-term deformation properties of FCGC under sulfate and high stress conditions. The effects of inner concrete, FRP layer, stress-to-strength ratio, sulfate concentration and load duration time on the shrinkage and creep behavior were clarified in detail. The findings indicate that the shrinkage of FCGC is relatively lower as the BFRP confinement weakens the moisture exchange between inner CGC and external environment. In addition, under sulfate and high stress conditions, the creep strain and specific creep increase continuously in the early stage, while the growth rate gradually slows down in the later stage, where the high stress-to-strength ratio is the key factor. Moreover, when compared with a single high stress condition, the creep strain of FCGC is relatively larger under sulfate and high stress coupling conditions, attributed to the sulfate corrosion on the BFRP wraps. Theoretically, the ACI 209 was modified to predict the nonlinear creep of CGC, by introducing the coal gangue influence coefficient and the increasing coefficient of nonlinear creep. Furthermore, based on the creep model of CGC and BFRP, the nonlinear calculation model of FCGC was developed considering the creep of CGC under a triaxial-stress state and the interaction between inner CGC and BFRP confinement. Validations against the experimental results show that the nonlinear creep model of FCGC works well.

Water-promoted oxidative coupling of aromatics with subnanometer palladium clusters confined in zeolites

A fundamental understanding of the active sites in working catalysts can guide the rational design of new catalysts with improved performances. In this work, we have followed the evolution of homogeneous and heterogeneous Pd catalysts under the reaction conditions for aerobic oxidative coupling of toluene for the production of 4,4′-bitolyl. We have found that subnanometer Pd clusters made with a few Pd atoms are the working active sites in both homogeneous and heterogeneous catalytic systems. Moreover, water can promote the activity of Pd clusters by nearly one-order magnitude for oxidative coupling reaction by facilitating the activation of O2. These new insights lead to the preparation of a catalyst made with Pd clusters supported on a two-dimensional zeolite, which expands the scope of the oxidative coupling of aromatics to larger substrates.

Superradiant phase transitions in ultrastrong coupling regime

Abstract One of the long-standing problems in quantum optics and laser physics is the observation of both equilibrium and non-equilibrium (Dicke) superradiant states in two-level (qubit) systems interacting with the quantized electromagnetic (EM) field. We demonstrate that the superradiant phase transition (PT) at thermal equilibrium in such a system is close to ultrastrong light–matter coupling (USC) condition, which is currently available for superconducting devices. We examine the USC regime for EM fields interacting with two-level systems located in highly connected graph nodes of photonic networks beyond the rotating wave approximation. We find that a critical matter–field coupling parameter reduces ⟨ k ⟩ times due to network peculiarities providing suitable conditions for equilibrium PT observation; ⟨ k ⟩ is a network average node degree. We study the non-equilibrium (Dicke) superradiance for the same network system and show that superradiance appears as a non-equilibrium PT to the superradiant laser operating within a bad cavity limit. We show that population inversion in this case plays the same role as the reciprocal temperature inherent to the equilibrium superradiant PT. Our results open new perspectives for experimental observation of superradiance in cavity-free systems in the gigahertz photonic regime and beyond.

Mathematical and numerical analysis of reduced order interface conditions and augmented finite elements for mixed dimensional problems

In this paper, we are interested in the mathematical properties of methods based on a fictitious domain approach combined with reduced-order interface coupling conditions, which have been recently introduced to simulate 3D-1D fluid-structure or structure-structure coupled problems. To give insights on the approximation properties of these methods, we investigate them in a simplified setting by considering the Poisson problem in a two-dimensional domain with non-homogeneous Dirichlet boundary conditions on small inclusions. The approximated reduced problem is obtained using a fictitious domain approach combined with a projection on a Fourier finite-dimensional space of the Lagrange multiplier associated to the Dirichlet boundary constraints, obtaining in this way a Poisson problem with defective interface conditions. After analyzing the existence of a solution of the reduced problem, we prove its convergence towards the original full problem, when the size of the holes tends towards zero, with a rate which depends on the number of modes of the finite-dimensional space. In particular, our estimates highlight the fact that to obtain a good convergence on the Lagrange multiplier, one needs to consider more modes than the first Fourier mode (constant mode). This is a key issue when one wants to deal with real coupled problems, such as fluid-structure problems for instance. Next, the numerical discretization of the reduced problem using the finite element method is analyzed in the case where the computational mesh does not fit the small inclusion interface. As is standard for these types of problem, the convergence of the solution is not optimal due to the lack of regularity of the solution. Moreover, convergence exhibits a well-known locking effect when the mesh size and the inclusion size are of the same order of magnitude. This locking effect is more apparent when increasing the number of modes and affects the Lagrange multiplier convergence rate more heavily. To resolve these issues, we propose and analyze a stabilized method and an enriched method for which additional basis functions are added without changing the approximation space of the Lagrange multiplier. Finally, the properties of numerical strategies are illustrated by numerical experiments.

Numerical Verification of a Polarization-Insensitive Electrically Tunable Far Infrared Band-Stop Meta-Surface Filter

Tunable filters have many potential applications in diverse fields, including high-capacity communications, dynamic beam shaping and spectral imaging. Although providing a high-performance solution for actively tunable devices, metasurface combined with tunable materials faces the great challenges of limited tuning range and modulation depth. Here, we propose a far-infrared tunable band-stop filter based on Fabry-Perot (FP) resonators and graphene surface plasmons. By switching the wavelength of the critical coupling condition of the filter via the gate voltage applied on graphene, achieving the dynamically tunable band-stop filtering at the central wavelengths from 12.4 μm to 14.1 μm with a modulation depth of more than 99%. Due to the symmetry of the proposed meta-atoms, the filter is insensitive to the polarization direction of the incident light. And it can realize more than 85% filtering efficiency within 60° angle of incidence around the vertical direction. By adjusting the geometry of the meta-atoms structure, it is feasible to move the operational range from the near-infrared to terahertz bands.

Numerical simulation of phase transition with the hyperbolic Godunov-Peshkov-Romenski model

In this paper, a thermodynamically consistent numerical solution of the interfacial Riemann problem for the first-order hyperbolic continuum model of Godunov, Peshkov and Romenski (GPR model) is presented. In the presence of phase transition, interfacial physics are governed by molecular interaction on a microscopic scale, beyond the scope of the macroscopic continuum model in the bulk phases. The developed approximate two-phase Riemann solvers tackle this multi-scale problem, by incorporating a local thermodynamic model to predict the interfacial entropy production. Using phenomenological relations of non-equilibrium thermodynamics, interfacial mass and heat fluxes are derived from the entropy production and provide closure at the phase boundary. We employ the proposed Riemann solvers in an efficient sharp interface level-set Ghost-Fluid framework to provide coupling conditions at phase interfaces under phase transition. As a single-phase benchmark, a Rayleigh-Bénard convection is studied to compare the hyperbolic thermal relaxation formulation of the GPR model against the hyperbolic-parabolic Euler-Fourier system. The novel interfacial Riemann solvers are validated against molecular dynamics simulations of evaporating shock tubes with the Lennard-Jones shifted and truncated potential. On a macroscopic scale, evaporating shock tubes are computed for the material n-Dodecane and compared against Euler-Fourier results. Finally, the efficiency and robustness of the scheme is demonstrated with shock-droplet interaction simulations that involve both phase transfer and surface tension, while featuring severe interface deformations.