Cost-effective Remediation Research Articles

China\u2019s most typical nonferrous organic-metal facilities own specific microbial communities

The diversity and function of microorganisms have yet to be explored at non-ferrous metal mining facilities (NMMFs), which are the world’s largest and potentially most toxic sources of co-existing metal(loid)s and flotation reagents (FRs). The diversity and inferred functions of different bacterial communities inhabiting two types of sites (active and abandoned) in Guangxi province (China) were investigated for the first time. Here we show that the structure and diversity of bacteria correlated with the types of mine sites, metal(loid)s, and FRs concentrations; and best correlated with the combination of pH, Cu, Pb, and Mn. Combined microbial coenobium may play a pivotal role in NMMFs microbial life. Arenimonas, specific in active mine sites and an acidophilic bacterium, carries functions able to cope with the extreme conditions, whereas Latescibacteria specific in abandoned sites can degrade organics. Such a bacterial consortium provides new insights to develop cost-effective remediation strategies of co-contaminated sites that currently remain intractable for bioremediation.

Determination of wild animal sources of fecal indicator bacteria by microbial source tracking (MST) influences regulatory decisions

Fecal indicator bacteria (FIB) are used to assess fecal pollution levels in surface water and are among the criteria used by regulatory agencies to determine water body impairment status. While FIB provide no information about pollution source, microbial source tracking (MST) does, which contributes to more direct and cost effective remediation efforts. We studied a watershed in Florida managed for wildlife conservation that historically exceeded the state regulatory guideline for fecal coliforms. We measured fecal coliforms, enterococci, a marker gene for avian feces (GFD), and a marker gene for human-associated Bacteroides (HF183) in sediment, vegetation, and water samples collected monthly from six sites over two years to: 1) assess the influence of site, temporal factors, and habitat (sediment, vegetation, and water) on FIB and MST marker concentrations, 2) test for correlations among FIB and MST markers, and 3) determine if avian feces and/or human sewage contributed to FIB levels. Sediment and vegetation had significantly higher concentrations of FIB and GFD compared to water and thus may serve as microbial reservoirs, providing unreliable indications of recent contamination. HF183 concentrations were greatest in water samples but were generally near the assay limit of detection. HF183-positive results were attributed to white-tailed deer (Odocoileus virginianus) feces, which provided a false indication of human sewage in this water body. FIB and GFD were positively correlated while FIB and HF183 were negatively correlated. We demonstrated that birds, not sewage, were the main source of FIB, thus avoiding implementation of a total maximum daily load program (TMDL). Our results demonstrate that the concomitant use of FIB and MST can improve decision-making and provide direction when water bodies are impaired, and provides a strategy for natural source exclusion in water bodies impacted by wild animal feces.

Phytoremediation of Pb and Cd contaminated soils by using sunflower (Helianthus annuus) plant

Phytoextraction is an emerging cost effective remediation technology that uses plants to remove metals from contaminated soils. Pot experiments were conducted to compare the biomass of Helianthus annuus L. plant grown on Pb and Cd contaminated soils, and to evaluate its efficacy for the removal of Pb and Cd. The obtained results showed that as the concentration of heavy metals increased in soil, the fresh and dry weights of the growing plants gradually decreased. The application of 200 mg kg−1 soil of Pb and Cd reduced the fresh weights of shoot and root (up to 76.6% and 64.3%; 88.5% and 80.80%, respectively), shoot and root length (up to 71.6% and 94.1%; 83.2% and 95.1%, respectively). The maximum concentration of Pb and Cd in shoot (40.1 and 65.7 mg kg−1 Dwt) and roots (107.7 and 71.3 mg kg−1, respectively) were recorded in the plant cultivated in soil amended with 200 mg kg−1 metal concentration. The highest bioaccumulation (BAF) was recorded for Cd in the root grown on soil amended with 20 mg kg−1 with an average value of 1.67. In addition, the value of the translocation factor (TF) of Cd increased by increasing the levels of Cd in soil; however, Pb translocation factor decreased by increasing the levels of Pb in soil. The study concludes that H. annuus plant was more favorable for Cd uptake compared to Pb, and we suggest its ability for the remediation of Pb and Cd contaminated soils.

Remediation of Petroleum-Contaminated Soil and Simultaneous Recovery of Oil by Fast Pyrolysis.

Petroleum-contaminated soil (PCS) caused by the accidental release of crude oil into the environment, which occurs frequently during oil exploitation worldwide, needs efficient and cost-effective remediation. In this study, a fast pyrolysis technology was implemented to remediate the PCS and concurrently recover the oil. The remediation effect related to pyrolytic parameters, the recovery rate of oil and its possible formation pathway, and the physicochemical properties of the remediated PCS and its suitability for planting were systematically investigated. The results show that 50.9% carbon was recovered in oil, whose quality even exceeds that of crude oil. Both extractable total petroleum hydrocarbon (TPH) and water-soluble organic matter (SOM) in PCS were completely removed at 500 °C within 30 min. The remaining carbon in remediated PCS was determined to be in a stable and innocuous state, which has no adverse effect on wheat growth. On the basis of the systematically characterizations of initial PCS and pyrolytic products, a possible thermochemical mechanism was proposed which involves evaporation, cracking and polymerization. In addition, the energy consumption analysis and remediation effect of various PCSs indicate that fast pyrolysis is a viable and cost-effective method for PCS remediation.

Enhancement of Conductive Coated Polymer Networks Utilizing Guest-Host Inclusion Complexes for the Electrotreatment of Heavy Metal Ion Effluent

As water pollution continues to be a global concern, there is a demand for cost effective remediation technologies. A large contribution of water scarcity can be traced back to heavy metal ion contamination which current technologies, such as ion exchange or ‘softening’ have proven to be ineffective. This work focuses on the remediation of heavy metal ion pollutants using the incorporation of β-Cyclodextrin (β-CD), and conductive polymers into an adsorbent, cellulosic nanocomposite. Previous results have shown that β-CD can enhance the adsorption capability allowing the removal of 75% Cadmium (Cd) ions from solution. To further increase the yield of metal ion removal, the chemical polymerization of a conductive polymer, such as polyaniline (PANI) introduces electrochemical properties to the cellulosic film. Initial results have indicated that with the application of voltage these conductive nanocomposites have the ability to be used for the electrochemical treatment of simulated wastewater as Copper (Cu) ions were shown to be successfully removed from solution.

Heavy Metal Pollution Delineation Based on Uncertainty in a Coastal Industrial City in the Yangtze River Delta, China.

Assessing heavy metal pollution and delineating pollution are the bases for evaluating pollution and determining a cost-effective remediation plan. Most existing studies are based on the spatial distribution of pollutants but ignore related uncertainty. In this study, eight heavy-metal concentrations (Cr, Pb, Cd, Hg, Zn, Cu, Ni, and Zn) were collected at 1040 sampling sites in a coastal industrial city in the Yangtze River Delta, China. The single pollution index (PI) and Nemerow integrated pollution index (NIPI) were calculated for every surface sample (0–20 cm) to assess the degree of heavy metal pollution. Ordinary kriging (OK) was used to map the spatial distribution of heavy metals content and NIPI. Then, we delineated composite heavy metal contamination based on the uncertainty produced by indicator kriging (IK). The results showed that mean values of all PIs and NIPIs were at safe levels. Heavy metals were most accumulated in the central portion of the study area. Based on IK, the spatial probability of composite heavy metal pollution was computed. The probability of composite contamination in the central core urban area was highest. A probability of 0.6 was found as the optimum probability threshold to delineate polluted areas from unpolluted areas for integrative heavy metal contamination. Results of pollution delineation based on uncertainty showed the proportion of false negative error areas was 6.34%, while the proportion of false positive error areas was 0.86%. The accuracy of the classification was 92.80%. This indicated the method we developed is a valuable tool for delineating heavy metal pollution.

Microbial reduction of vanadium (V) in groundwater: Interactions with coexisting common electron acceptors and analysis of microbial community

Vanadium (V) pollution in groundwater has posed serious risks to the environment and public health. Anaerobic microbial reduction can achieve efficient and cost-effective remediation of V(V) pollution, but its interactions with coexisting common electron acceptors such as NO3−, Fe3+, SO42− and CO2 in groundwater remain unknown. In this study, the interactions between V(V) reduction and reduction of common electron acceptors were examined with revealing relevant microbial community and identifying dominant species. The results showed that the presence of NO3− slowed down the removal of V(V) in the early stage of the reaction but eventually led to a similar reduction efficiency (90.0% ± 0.4% in 72-h operation) to that in the reactor without NO3−. The addition of Fe3+, SO42−, or CO2 decreased the efficiency of V(V) reduction. Furthermore, the microbial reduction of these coexisting electron acceptors was also adversely affected by the presence of V(V). The addition of V(V) as well as the extra dose of Fe3+, SO42− and CO2 decreased microbial diversity and evenness, whereas the reactor supplied with NO3− showed the increased diversity. High-throughput 16S rRNA gene pyrosequencing analysis indicated the accumulation of Geobacter, Longilinea, Syntrophobacter, Spirochaeta and Anaerolinea, which might be responsible for the reduction of multiple electron acceptors. The findings of this study have demonstrated the feasibility of anaerobic bioremediation of V(V) and the possible influence of coexisting electron acceptors commonly found in groundwater.

Effective rhizoinoculation and biofilm formation by arsenic immobilizing halophilic plant growth promoting bacteria (PGPB) isolated from mangrove rhizosphere: A step towards arsenic rhizoremediation

Arsenic (As) uptake by plants is largely influenced by the presence of microbial consortia and their interactions with As. In the coastal region of Bengal deltaic plain of Eastern India, the As-contaminated groundwater is frequently used for irrigation purposes resulting in an elevated level of soil As in agricultural lands. The health hazards associated with As necessitates development of cost-effective remediation strategies to reclaim contaminated agricultural lands. Among the available technologies developed in recent times, bioremediation using bacteria has been found to be the most propitious. In this study, two As-resistant halophilic bacterial strains Kocuria flava AB402 and Bacillus vietnamensis AB403 were isolated, identified and characterized from mangrove rhizosphere of Sundarban. The isolates, AB402 and AB403, could tolerate 35mM and 20mM of arsenite, respectively. The effect of As on the exopolysaccharide (EPS) synthesis, biofilm formation, and root association was evaluated for both the bacterial strains. Arsenic adsorption on the cell surfaces and intracellular accumulation in both the bacterial strains were promising under culture conditions. Moreover, both the strains when used as inoculum, not only promoted the growth of rice seedlings but also decreased As uptake and accumulation in plants.

(Im)mobilization of soil heavy metals using CaO, FA, sulfur, and Na2S: a 1-year incubation study

The immobilization of heavy metals (HMs)-contaminated soils using amendments is a cost-effective remediation technique. Therefore, the aim of this study was to evaluate the effectiveness and aging factor of CaO, fly ash (FA), sulfur, and Na2S on the immobilization of Cd, Cu, and Pb in three different contaminated soils under 1-year incubation. The study sites (S) and amendments treatments (T) are termed as S1, S2, and S3 and T1, T2, T3, and T4, respectively. The TCLP-extractable HMs were analyzed in treated soils after 2, 6, and 12 months. The higher concentrations of CaO, FA, and Na2S (T3 and T4) efficiently immobilized the Cd. However, a moderate Cd decrease was noted in sulfur-treated samples with no significant difference in ratios as compared to control in used soils. Likewise, CaO decreased moderately Cu content in used soils with gradual increase in Cu mobility. Similarly, FA, sulfur, and Na2S showed effective immobilization of Cu content with no difference in treatment ratios as compared to control. In addition, CaO, sulfur, and Na2S decreased the significant content of Pb as compared to control. However, FA treatments showed moderate reduction in Pb content with no difference in ratios. The higher concentrations of alkaline amendments should be avoided in the farmland soils as they increase the soil pH and EC of soil ecosystem. The higher ratios of alkaline amendments would be suitable to remediate the abandoned lands/brownfields. The sulfur amendment would be suitable for immobilization of metals in alkaline soils rather than in acidic soils.

Spatiotemporal assessment (quarter century) of pulp mill metal(loid) contaminated sediment to inform remediation decisions

A bleached kraft pulp mill in Nova Scotia has discharged effluent wastewater into Boat Harbour, a former tidal estuary within Pictou Landing First Nation since 1967. Fifty years of effluent discharge into Boat Harbour has created >170,000m3 of unconsolidated sediment, impacted by inorganic and organic contaminants, including metal[loid]s, polycyclic aromatic hydrocarbons (PAHs), dioxins, and furans. This study aimed to characterize metal(loid)-impacted sediments to inform decisions for a $89 million CAD sediment remediation program. The remediation goals are to return this impacted aquatic site to pre-mill tidal conditions. To understand historical sediment characteristics, spatiotemporal variation covering ~quarter century, of metal(loid) sediment concentrations across 103 Boat Harbour samples from 81 stations and four reference locations, were assessed by reviewing secondary data from 1992 to 2015. Metal(loid) sediment concentrations were compared to current Canadian freshwater and marine sediment quality guidelines (SQGs). Seven metal(loid)s, As, Cd, Cr, Cu, Pb, Hg, and Zn, exceeded low effect freshwater and marine SQGs; six, As, Cd, Cr, Pb, Hg, and Zn, exceeded severe effect freshwater SQGs; and four, Cd, Cu, Hg, and Zn, exceeded severe effect marine SQGs. Metal(loid) concentrations varied widely across three distinct temporal periods. Significantly higher Cd, Cu, Pb, Hg, and Zn concentrations were measured between 1998 and 2000, compared to earlier, 1992-1996 and more recent 2003-2015 data. Most samples, 69%, were shallow (0-15cm), leaving deeper horizons under-characterized. Geographic information system (GIS) techniques also revealed inadequate spatial coverage, presenting challenges for remedy decisions regarding vertical and horizontal delineation of contaminants. Review of historical monitoring data revealed that gaps still exist in our understanding of sediment characteristics in Boat Harbour, including spatial, vertical and horizontal, and temporal variation of sediment contamination. To help return Boat Harbour to a tidal estuary, more detailed sampling is required to better characterize these sediments and to establish appropriate reference (background) concentrations to help develop cost-effective remediation approaches for this decades-old problem.

Case studies and evidence-based approaches to addressing urban soil lead contamination

Urban soils in many communities in the United States and internationally have been contaminated by lead (Pb) from past use of lead additives in gasoline, deterioration of exterior paint, emissions from Pb smelters and battery recycling and other industries. Exposure to Pb in soil and related dust is widespread in many inner city areas. Up to 20–40% of urban children in some neighborhoods have blood lead levels (BLLs) equal to or above 5 μg per decilitre, the reference level of health concern by the U.S. Centers for Disease Control. Given the widespread nature of Pb contamination in urban soils it has proven a challenge to reduce exposure. In order to prevent this exposure, an evidence-based approach is required to isolate or remediate the soils and prevent children and adult's ongoing exposure. To date, the majority of community soil Pb remediation efforts have been focused in mining towns or in discrete neighborhoods where Pb smelters have impacted communities. These efforts have usually entailed very expensive dig and dump soil Pb remediation techniques, funded by the point source polluters. Remediating widespread non-point source urban soil contamination using this approach is neither economical nor feasible from a practical standpoint. Despite the need to remediate/isolate urban soils in inner city areas, no deliberate, large scale, cost effective Pb remediation schemes have been implemented to isolate inner city soils impacted from sources other than mines and smelters. However, a city-wide natural experiment of flooding in New Orleans by Hurricane Katrina demonstrated that declines in soil Pb resulted in major BLL reductions. Also a growing body of literature of smaller scale pilot studies and programs does exist regarding low cost efforts to isolate Pb contaminated urban soils. This paper reviews the literature regarding the effectiveness of soil Pb remediation for reducing Pb exposure and BLL in children, and suggests best practices for addressing the epidemics of low-level Pb poisoning occurring in many inner city areas.

Aerobic and anaerobic biosynthesis of nano-selenium for remediation of mercury contaminated soil

Selenium (Se) nanoparticles are often synthesized by anaerobes. However, anaerobic bacteria cannot be directly applied for bioremediation of contaminated top soil which is generally aerobic. In this study, a selenite-reducing bacterium, Citrobacter freundii Y9, demonstrated high selenite reducing power and produced elemental nano-selenium nanoparticles (nano-Se0) under both aerobic and anaerobic conditions. The biogenic nano-Se0 converted 45.8–57.1% and 39.1–48.6% of elemental mercury (Hg0) in the contaminated soil to insoluble mercuric selenide (HgSe) under anaerobic and aerobic conditions, respectively. Addition of sodium dodecyl sulfonate enhanced Hg0 remediation, probably owing to the release of intracellular nano-Se0 from the bacterial cells for Hg fixation. The reaction product after remediation was identified as non-reactive HgSe that was formed by amalgamation of nano-Se0 and Hg0. Biosynthesis of nano-Se0 both aerobically and anaerobically therefore provides a versatile and cost-effective remediation approach for Hg0-contaminated surface and subsurface soils, where the redox potential often changes dramatically.

Biogeotechnical Mitigation of Earthquake-Induced Soil Liquefaction

Three biogeotechnologies currently under development show promise for cost-effective remediation of liquefaction under existing facilities.

Engineering practice of mechanical soil aeration for the remediation of volatile organic compound-contaminated sites in China: Advantages and challenges

In recent years, many industrial enterprises located in the urban centers of China have been relocated owing to the rapid increase in urban development. At the sites abandoned by these enterprises, volatile organic compounds have frequently been detected, sometimes at high concentrations, particularly at sites abandoned by chemical manufacturing enterprises. With the redevelopment of sites and changes in land-use type associated with these sites, substantial amounts of contaminated soils now require remediation. Since China is a developing country, soil remediation warrants the usage of techniques that are suitable for addressing the unique challenges faced in this country. Land shortage is a common problem in China; the large numbers of contaminated sites, tight development schedules, and limited financial resources necessitate the development of cost-effective methods for land reclamation. Mechanical soil aeration is a simple, effective, and low-cost soil remediation technique that is particularly suitable for the remediation of large volatile organic compound-contaminated sites. Its effectiveness has been confirmed by conducting laboratory studies, pilot tests, and full-scale projects. This study reviews current engineering practice and developmental trends of mechanical soil aeration and analyzes the advantages and disadvantages of this technology for application in China as an emerging soil remediation market. The findings of this study might aid technology development in China, as well as assist other developing countries in the assessment and implementation of costeffective hazardous waste site soil remediation programs. Open image in new window

Formation and Geological Sequestration of Uranium Nanoparticles in Deep Granitic Aquifer.

The stimulation of bacterial activities that convert hexavalent uranium, U(VI), to tetravalent uranium, U(IV), appears to be feasible for cost-effective remediation of contaminated aquifers. However, U(VI) reduction typically results in the precipitation of U(IV) particles less than 5 nanometers in diameter, except for environmental conditions enriched with iron. Because these tiny particles are mobile and susceptible to oxidative dissolution after the termination of nutrient injection, in situ bioremediation remains to be impractical. Here we show that U(IV) nanoparticles of coffinite (U(SiO4)1−x(OH)4x) formed in fracture-filling calcium carbonate in a granitic aquifer. In situ U-Pb isotope dating demonstrates that U(IV) nanoparticles have been sequestered in the calcium carbonate for at least 1 million years. As the microbiologically induced precipitation of calcium carbonate in aquifer systems worldwide is extremely common, we anticipate simultaneous stimulation of microbial activities for precipitation reactions of calcium carbonate and U(IV) nanoparticles, which leads to long-term sequestration of uranium and other radionuclides in contaminated aquifers and deep geological repositories.

Simultaneous removal of trichloroethylene and hexavalent chromium by green synthesized agarose-Fe nanoparticles hydrogel

The development of highly efficient, eco-friendly and cost-effective remediation technology to remove mixed contaminants is now in progress. Here, agarose-Fe nanoparticles (NPs) hydrogel were produced via two green steps to remove mixed contaminants, specifically trichloroethylene (TCE) and hexavalent chromium (Cr(VI)). Approx. 84.9% of Cr(VI) and 93.8% of TCE were simultaneously removed over 24h in their co-existing solution, while 94.1% of Cr(VI) and 97.2% of TCE were separately removed by agarose-Fe NPs hydrogel. Scanning Electron Microscopy (SEM) suggested that the macroporosity of agarose-Fe NPs hydrogel facilitated the mass transfer between agarose-Fe NPs hydrogels and mixed contaminants, and that Fe NPs were uniformly immobilized into the hydrogel. X-ray Photoelectron Spectroscopy (XPS) and Fourier Transform Infrared Spectroscopy (FTIR) provided evidence supporting the co-removal mechanism. XPS result indicated that: (1) chemical reduction played a role in the removal of both Cr(VI) and TCE; and (2) iron oxides and Fe(III)–Cr(III) complexes might be formed after reaction. FTIR result showed that some functional groups were involved in the removal process. Moreover, the presence of iron oxides were confirmed by FTIR. Both SEM and XPS results verified that encapsulation could describe such immobilization of Fe NPs using agarose. Finally, the kinetics study supported the removal mechanism. Such encapsulation of Fe NPs via a green strategy is simple, quick, and cost-effective, making in situ remediation of mixed contaminants more favorable.

Remediation of Mud Pumping on a Ballasted Railway Track

Maintenance of ballasted railway tracks is a major cost for railway infrastructure owners. In many developed countries, much of the railway infrastructure is mature and was built for service requirements long since superseded. The increased demands on historic infrastructure can lead to the development or exacerbation of localised trackbed problems that require disproportionate levels of maintenance. Identifying these and applying cost effective remediation has the potential to reduce maintenance spend in the long term. However, it is not always clear what the most cost effective remediation will be. One type of localised maintenance issue is the development of wet beds or wet spots, which can occur where saturated clayey subgrade soils are overloaded and result in the development of mud pumping as trains pass. This leads to the migration of fines into the ballast bed and a deterioration in local track performance. Over time the track overlying the wet bed settles disproportionately more, sleepers become progressively more voided, and train ride quality deteriorates. Maintenance of the wet bed may involve locally digging out and replacing the ballast; however, unless the underlying cause is addressed the problem is likely to recur, requiring repeated localised maintenance interventions. This is costly, reactive and ultimately an ineffective approach to managing the problem. This paper presents a study of a wet bed in the UK, both prior to and after a full track renewal. Transient track deflections during train passage were monitored using sleeper mounted geophones and high speed filming techniques. Loaded track geometry data were obtained from a track recording vehicle. It is shown that local maintenance interventions were generally ineffective, but that a renewal of the top 200mm of the trackbed including placement of a geotextile filter and geogrid appears to have been successful in remediating the problem, at least in the short term.

Arsenic Occurrence, Ecotoxicity and its Potential Remediation

Arsenic levels in water, sediments, and biota of the estuaries and coastal ecosystems have been well documented. Natural and anthropogenic activities such as industrial offshore oil spills and groundwater pollution have increased its levels in natural water systems. This brief review provides a clear view on arsenic occurrence, ecotoxicity and its potential remediation. Both humans and biota were affected from arsenic contamination. The development of substitute materials for arsenic applications in the agricultural and forestry industries and controls of arsenic emissions from the coal industry may be possible strategies to significantly decrease arsenic pollution sources and dissipation rates into the environment. At the same, to develop cost effective green remediation technology for cleaning As in water and soils is essential.

AN OVERVIEW ON OIL CONTAMINATED SAND AND ITS ENGINEERING APPLICATIONS

Oil leakage is considered as one of the significant environmental issue worldwide, which affects the physical and chemical properties of the surrounding sand. A range of remediation methods for oil-contaminated sand was recommended but none are considered to be cost effective especially in developing countries. In order to find an alternative and cost-effective remediation method, the use of oil contaminated sand in engineering and construction has been considered. This paper reviews the main sources of oil contamination, the existing remediation methods and critically analysed several factors that affecting the properties of oil contaminated sand. Emerging applications of oil contaminated sand in engineering and construction are also presented.

A Newly Identified Passive Hyperaccumulator Eucalyptus grandis × E. urophylla under Manganese Stress.

Manganese (Mn) is an essential micronutrient needed for plant growth and development, but can be toxic to plants in excess amounts. However, some plant species have detoxification mechanisms that allow them to accumulate Mn to levels that are normally toxic, a phenomenon known as hyperaccumulation. These species are excellent candidates for developing a cost-effective remediation strategy for Mn-polluted soils. In this study, we identified a new passive Mn-hyperaccumulator Eucalyptus grandis × E. urophylla during a field survey in southern China in July 2010. This hybrid can accumulate as much as 13,549 mg/kg DW Mn in its leaves. Our results from Scanning Electron Microscope (SEM) X-ray microanalysis indicate that Mn is distributed in the entire leaf and stem cross-section, especially in photosynthetic palisade, spongy mesophyll tissue, and stem xylem vessels. Results from size-exclusion chromatography coupled with ICP-MS (Inductively coupled plasma mass spectrometry) lead us to speculate that Mn associates with relatively high molecular weight proteins and low molecular weight organic acids, including tartaric acid, to avoid Mn toxicity. Our results provide experimental evidence that both proteins and organic acids play important roles in Mn detoxification in Eucalyptus grandis × E. urophylla. The key characteristics of Eucalyptus grandis × E. urophylla are an increased Mn translocation facilitated by transpiration through the xylem to the leaves and further distribution throughout the leaf tissues. Moreover, the Mn-speciation profile obtained for the first time in different cellular organelles of Eucalyptus grandis × E. urophylla suggested that different organelles have differential accumulating abilities and unique mechanisms for Mn-detoxification.