Coronal Source Research Articles

RECONNECTION-DRIVEN CORONAL-HOLE JETS WITH GRAVITY AND SOLAR WIND

ABSTRACT Coronal-hole jets occur ubiquitously in the Sun's coronal holes, at EUV and X-ray bright points associated with intrusions of minority magnetic polarity. The embedded-bipole model for these jets posits that they are driven by explosive, fast reconnection between the stressed closed field of the embedded bipole and the open field of the surrounding coronal hole. Previous numerical studies in Cartesian geometry, assuming uniform ambient magnetic field and plasma while neglecting gravity and solar wind, demonstrated that the model is robust and can produce jet-like events in simple configurations. We have extended these investigations by including spherical geometry, gravity, and solar wind in a nonuniform, coronal hole-like ambient atmosphere. Our simulations confirm that the jet is initiated by the onset of a kink-like instability of the internal closed field, which induces a burst of reconnection between the closed and external open field, launching a helical jet. Our new results demonstrate that the jet propagation is sustained through the outer corona, in the form of a traveling nonlinear Alfvén wave front trailed by slower-moving plasma density enhancements that are compressed and accelerated by the wave. This finding agrees well with observations of white-light coronal-hole jets, and can explain microstreams and torsional Alfvén waves detected in situ in the solar wind. We also use our numerical results to deduce scaling relationships between properties of the coronal source region and the characteristics of the resulting jet, which can be tested against observations.

Strong XUV irradiation of the Earth-sized exoplanets orbiting the ultracool dwarf TRAPPIST-1

Abstract We present an XMM–Newton X-ray observation of TRAPPIST-1, which is an ultracool dwarf star recently discovered to host three transiting and temperate Earth-sized planets. We find the star is a relatively strong and variable coronal X-ray source with an X-ray luminosity similar to that of the quiet Sun, despite its much lower bolometric luminosity. We find LX/Lbol = 2–4 × 10−4, with the total XUV emission in the range LXUV/Lbol = 6–9 × 10−4, and XUV irradiation of the planets that is many times stronger than experienced by the present-day Earth. Using a simple energy-limited model, we show that the relatively close-in Earth-sized planets, which span the classical habitable zone of the star, are subjected to sufficient X-ray and EUV irradiation to significantly alter their primary and any secondary atmospheres. Understanding whether this high-energy irradiation makes the planets more or less habitable is a complex question, but our measured fluxes will be an important input to the necessary models of atmospheric evolution.

Diagnostic values of ProSet magnetic resonance coronal source imaging for detecting symptomatic lesion in multiple lumbar foraminal stenosis

ObjectiveThe aim of this study is to evaluate the values of ProSet magnetic resonance coronal source imaging (ProSet MR imaging) as a diagnostic tool for detecting symptomatic lesion in patients with multiple lumbar foraminal stenosis. Patients and methodsFrom January 2011 to June 2015, 46 patients with unilateral and single-level radiculopathy developed from foraminal stenosis were enrolled in the study. These diagnoses were confirmed with transforaminal selective nerve root block (SNRB) and electrophysiological testing, including electromyography and nerve conduction velocity (EMG/NCV) tests. The detection of symptomatic lesion among multiple lumbar foraminal stenosis was done by identification of spinal nerve swelling (NS) and/or running course abnormalities (RCA) observed on ProSet MR imaging. These results were compared with those from transforaminal SNRB testing and conventional MR imaging. Evaluations were performed blinded by two independent examiners. ResultsThe diagnostic accuracy rates of the two examiners were 84.7% and 82.6% with a 0.835 kappa coefficient. NS (80.4%) showed a higher diagnostic accuracy rate compared to RCA (69.6%) for detecting symptomatic lesion. The presence or absence of both NS and RCA has a stronger relationship with symptomatic or non-symptomatic lesion compared to the relationship of either alone (p=0.00). ConclusionProSet MR imaging is a simple and helpful method for providing additional diagnostic accuracy to detect symptomatic lesion in patients with multiple foraminal stenosis. NS representing chemical radiculitis was more reliable diagnostic factor of ProSet MR imaging.

X-ray and microwave emissions from the July 19, 2012 solar flare: Highly accurate observations and kinetic models

The M7.7 solar flare of July 19, 2012, at 05:58 UT was observed with high spatial, temporal, and spectral resolutions in the hard X-ray and optical ranges. The flare occurred at the solar limb, which allowed us to see the relative positions of the coronal and chromospheric X-ray sources and to determine their spectra. To explain the observations of the coronal source and the chromospheric one unocculted by the solar limb, we apply an accurate analytical model for the kinetic behavior of accelerated electrons in a flare. We interpret the chromospheric hard X-ray source in the thick-target approximation with a reverse current and the coronal one in the thin-target approximation. Our estimates of the slopes of the hard X-ray spectra for both sources are consistent with the observations. However, the calculated intensity of the coronal source is lower than the observed one by several times. Allowance for the acceleration of fast electrons in a collapsing magnetic trap has enabled us to remove this contradiction. As a result of our modeling, we have estimated the flux density of the energy transferred by electrons with energies above 15 keV to be ∼5 × 1010 erg cm−2 s−1, which exceeds the values typical of the thick-target model without a reverse current by a factor of ∼5. To independently test the model, we have calculated the microwave spectrum in the range 1–50 GHz that corresponds to the available radio observations.

A global look at X-ray time lags in Seyfert galaxies

X-ray reverberation, where light-travel time delays map out the compact geometry around the inner accretion flow in supermassive black holes, has been discovered in several of the brightest, most variable and well-known Seyfert galaxies. In this work, we expand the study of X-ray reverberation to all Seyfert galaxies in the XMM-Newton archive above a nominal rms variability and exposure level (a total of 43 sources). 50 per cent of source exhibit iron K reverberation, in that the broad iron K emission line responds to rapid variability in the continuum. We also find that on long timescales, the hard band emission lags behind the soft band emission in 85 per cent of sources. This `low-frequency hard lag' is likely associated with the coronal emission, and so this result suggests that most sources with X-ray variability show intrinsic variability from the nuclear region. We update the known iron K lag amplitude vs. black hole mass relation, and find evidence that the height or extent of the coronal source (as inferred by the reverberation time delay) increases with mass accretion rate.

Using the WSA Model to Test the Parker Spiral Approximation for SEP Event Magnetic Connections

In studies of solar energetic ( $E > 10~\mbox{MeV}$ ) particle (SEP) events the Parker spiral (PS) field approximation, based only on the measured 1 AU solar wind (SW) speed $V$ sw, is nearly always used to determine the coronal or photospheric source locations of the 1 AU magnetic fields. There is no objective way to validate that approximation, but here we seek guidelines for optimizing its application. We first review recent SEP studies showing the extensive use of the PS approximation with various assumptions about coronal and photospheric source fields. We then run the Wang–Sheeley–Arge (WSA) model over selected Carrington rotations (CRs) to track both the photospheric and $5~\mbox{R}_{\odot}$ source locations of the forecasted 1 AU SW, allowing us to compare those WSA sources with the PS sources inferred from the WSA $V$ sw forecast. We compile statistics of the longitude differences (WSA–PS) for all the CRs and discuss the limitations of using the WSA model to validate the PS approximation. Over nearly all of each CR the PS and WSA source longitudes agree to within several degrees. The agreement is poor only in the slow–fast SW interaction regions characterized by high-speed events (HSEs), where the longitude differences can reach several tens of degrees. This result implies that SEP studies should limit use of the PS approximation around HSEs and use magnetic field polarities as an additional check of solar source connections.

Emission Measure and Temperature Analysis of the Upper Coronal Source of a Solar Flare

An X-ray coronal source is usually seen above the reconnection site located above flare loops, while a second source appears in between this site and the loops. The first source is called the upper coronal source, the second the loop-top source. Both sources are thought to be related to the outflows from the magnetic reconnection site above the flare loops. Previous observations have shown that the upper coronal source has both a thermal and nonthermal component. In this article, we explore the spatial appearance of the upper coronal source in a solar flare observed by the Reuven Ramaty High Energy Solar Spectroscopic Imager (RHESSI) and the Atmospheric Imaging Assembly onboard the Solar Dynamics Observatory (SDO/AIA) on 8 March 2011. This event occurred at the limb with completely occulted loop footpoints. Both the loop-top and the upper coronal sources are well observed by RHESSI in X-rays. The loop-top source emission covers a wide energy range up to 50 keV, while the upper coronal source emits below 25 keV. The upper coronal source appears later (about two minutes) than the loop-top source, and the RHESSI X-ray spectral analysis shows that both sources have a temperature of 30 MK. This temperature is confirmed by the differential emission measure (DEM) analysis from SDO/AIA data. AIA observations show the counterparts in the ultraviolet (UV), and bidirectional outflows appear between AIA brightenings. The loop-top source seems to be located at the top of a hot and dense loop system, which expands with a speed of $10~\mbox{km}\,\mbox{s}^{-1}$ , while the upper coronal source moves faster upward with a speed of about $32~\mbox{km}\,\mbox{s}^{-1}$ in the same time interval. The analysis of the spatial distribution of the emission measure and temperature indicates that the hot plasma itself or the heating region are possibly moving upward from the lower coronal region where the loop-top source appears. This is the reason that the upper coronal source appears later than the loop-top source.

The orbital phase resolved spectroscopy of X-ray binary 4U 1822−371 with Suzaku

4U 1822−371 is a typical edge-on eclipsing low mass X-ray binary and the prototype of accretion disk coronal sources. We report on the results of a spectral analysis over the energy range 0.5–45 keV observed by Suzaku in 2006. We extract spectra from five orbital phases. The spectra can be equally well described by various previously proposed models: an optically thick model described by a partially covered cutoff power law and an optically thin model described by a blackbody plus a cutoff power law. The optically thick model requires a covering fraction of about 55%, while the optically thin model requires a temperature of the central source of about 0.16 keV. The spectrum in the optically thick model also shows the previously detected cyclotron line feature at ∼30 keV with the same Suzaku observation. This feature confirms the presence of a strong magnetic field. The Fe Kα fluorescent line strengths as well as the detected Fe XXVI strengths are similar to previous Chandra and XMM-Newton detections in our phased spectral analysis; however, we also observe strong Fe XXVI during the eclipse, which indicates a slightly larger central corona.

ChemiX: a Bragg crystal spectrometer for the Interhelioprobe interplanetary mission

Interhelioprobe (IHP), an analogue to the ESA Solar Orbiter, is the prospective Russian space solar observatory intended for in-situ and remote sensing investigations of the Sun and the inner heliosphere from a heliocentric orbit with the perihelion of about 60 solar radii. One of several instruments on board will be the Bragg crystal spectrometer ChemiX which will measure X-ray spectra from solar corona structures. Analysis of the spectra will allow the determination of the elemental composition of plasma in hot coronal sources like flares and active regions. ChemiX is under development at the Wroclaw Solar Physics Division of the Polish Academy of Sciences Space Research Centre in collaboration with an international team (see the co-author list). This paper gives an overview of the ChemiX scientific goals and design preparatory to phase B of the instrument development.

VALIDATION OF THE CORONAL THICK TARGET SOURCE MODEL

ABSTRACT We present detailed 3D modeling of a dense, coronal thick-target X-ray flare using the GX Simulator tool, photospheric magnetic measurements, and microwave imaging and spectroscopy data. The developed model offers a remarkable agreement between the synthesized and observed spectra and images in both X-ray and microwave domains, which validates the entire model. The flaring loop parameters are chosen to reproduce the emission measure, temperature, and the nonthermal electron distribution at low energies derived from the X-ray spectral fit, while the remaining parameters, unconstrained by the X-ray data, are selected such as to match the microwave images and total power spectra. The modeling suggests that the accelerated electrons are trapped in the coronal part of the flaring loop, but away from where the magnetic field is minimal, and, thus, demonstrates that the data are clearly inconsistent with electron magnetic trapping in the weak diffusion regime mediated by the Coulomb collisions. Thus, the modeling supports the interpretation of the coronal thick-target sources as sites of electron acceleration in flares and supplies us with a realistic 3D model with physical parameters of the acceleration region and flaring loop.

MULTITHERMAL REPRESENTATION OF THE KAPPA-DISTRIBUTION OF SOLAR FLARE ELECTRONS AND APPLICATION TO SIMULTANEOUS X-RAY AND EUV OBSERVATIONS

Acceleration of particles and plasma heating is one of the fundamental problems in solar flare physics. An accurate determination of the spectrum of flare-energized electrons over a broad energy range is crucial for our understanding of aspects such as the acceleration mechanism and the total flare energy. Recent years have seen a growing interest in the kappa-distribution as a representation of the total spectrum of flare-accelerated electrons. In this work we present the kappa-distribution as a differential emission measure. This allows for inferring the electron distribution from X-ray observations and EUV observations by simultaneously fitting the proposed function to RHESSI and SDO/AIA data. This yields the spatially integrated electron spectra of a coronal source from less than 0.1 keV up to several tens of keV. The method is applied to a single-loop GOES C4.1 flare. The results show that the total energy can only be determined accurately by combining RHESSI and AIA observations. Simultaneously fitting the proposed representation of the kappa-distribution reduces the electron number density in the analyzed flare by a factor of ∼30 and the total flare energy by a factor of ∼5 compared with the commonly used fitting of RHESSI spectra. The spatially integrated electron spectrum of the investigated flare between 0.043 and 24 keV is consistent with the combination of a low-temperature (∼2 MK) component and a hot (∼11 MK) kappa-like component with spectral index 4, reminiscent of solar wind distributions.

High-temperature differential emission measure and altitude variations in the temperature and density of solar flare coronal X-ray sources

The detailed knowledge of plasma heating and acceleration region properties presents a major observational challenge in solar flare physics. Using the Ramaty High Energy Solar Spectroscopic Imager (RHESSI), the high temperature differential emission measure, DEM(T), and the energy-dependent spatial structure of solar flare coronal sources are studied quantitatively. The altitude of the coronal X-ray source is observed to increase with energy by ~+0.2 arcsec/keV between 10 and 25 keV. Although an isothermal model can fit the thermal X-ray spectrum observed by RHESSI, such a model cannot account for the changes in altitude, and multi-thermal coronal sources are required where the temperature increases with altitude. For the first time, we show how RHESSI imaging information can be used to constrain the DEM(T) of a flaring plasma. We develop a thermal bremsstrahlung X-ray emission model with inhomogeneous temperature and density distributions to simultaneously reproduce: i) DEM(T), ii) altitude as a function of energy, and iii) vertical extent of the flaring coronal source versus energy. We find that the temperature-altitude gradient in the region is ~+0.08 keV/arcsec (~1.3 MK/Mm). Similar altitude-energy trends in other flares suggest that the majority of coronal X-ray sources are multi-thermal and have strong vertical temperature and density gradients with a broad DEM(T).

Solar coronal magnetic fields derived using seismology techniques applied to omnipresent sunspot waves

Sunspots on the surface of the Sun are the observational signatures of intense manifestations of tightly packed magnetic field lines, with near-vertical field strengths exceeding 6,000 G in extreme cases. It is well accepted that both the plasma density and the magnitude of the magnetic field strength decrease rapidly away from the solar surface, making high-cadence coronal measurements through traditional Zeeman and Hanle effects difficult since the observational signatures are fraught with low-amplitude signals that can become swamped with instrumental noise. Magneto-hydrodynamic (MHD) techniques have previously been applied to coronal structures, with single and spatially isolated magnetic field strengths estimated as 9-55 G. A drawback with previous MHD approaches is that they rely on particular wave modes alongside the detectability of harmonic overtones. Here we show, for the first time, how omnipresent magneto-acoustic waves, originating from within the underlying sunspot and propagating radially outwards, allow the spatial variation of the local coronal magnetic field to be mapped with high precision. We find coronal magnetic field strengths of 32 +/- 5 G above the sunspot, which decrease rapidly to values of approximately 1 G over a lateral distance of 7000 km, consistent with previous isolated and unresolved estimations. Our results demonstrate a new, powerful technique that harnesses the omnipresent nature of sunspot oscillations to provide magnetic field mapping capabilities close to a magnetic source in the solar corona.

HOW IMPORTANT ARE ELECTRON BEAMS IN DRIVING CHROMOSPHERIC EVAPORATION IN THE 2014 MARCH 29 FLARE?

We present high spatial resolution observations of chromospheric evaporation in the flare SOL2014-03-29T17:48. Interface Region Imaging Spectrograph (IRIS) observations of the FeXXI 1354.1 A line indicate evaporating plasma at a temperature of 10 MK along the flare ribbon during the flare peak and several minutes into the decay phase with upflow velocities between 30 km s$^{-1}$ and 200 km s$^{-1}$. Hard X-ray (HXR) footpoints were observed by RHESSI for two minutes during the peak of the flare. Their locations coincided with the locations of the upflows in parts of the southern flare ribbon but the HXR footpoint source preceded the observation of upflows in FeXXI by 30-75 seconds. However, in other parts of the southern ribbon and in the northern ribbon the observed upflows were not coincident with a HXR source in time nor space, most prominently during the decay phase. In this case evaporation is likely caused by energy input via a conductive flux that is established between the hot (25 MK) coronal source, which is present during the whole observed time-interval, and the chromosphere. The presented observations suggest that conduction may drive evaporation not only during the decay phase but also during the flare peak. Electron beam heating may only play a role in driving evaporation during the initial phases of the flare.

Particle acceleration in 3D single current sheets formed in the solar corona and heliosphere: PIC approach

Acceleration of protons and electrons in a reconnecting current sheet (RCS) is investigated with the test particle and particle-in-cell (PIC) approaches in a 3D magnetic topology. PIC simulations confirm a spatial separation of electrons and protons with respect to the midplane depending on the guiding field. Simulation reveals that the separation occurs in magnetic topologies with strong guiding fields and lasts as long as the particles are kept dragged into a current sheet. This separation produces a polarisation electric field induced by the plasma feedback to a presence of accelerated particles, which shape can change from symmetric towards the midplane (for weak guiding field) to fully asymmetric (for strong guiding field). Particles are found accelerated at a midplane of any current sheets present in the heliosphere to the energies up to hundred keV for electrons and hundred MeV for protons. The maximum energy gained by particles during their motion inside the current sheet is defined by its magnetic field topology (the ratio of magnetic field components), the side and location from the X-nullpoint, where the particles enter a current sheet. In strong magnetic fields of the solar corona with weaker guiding fields, electrons are found circulating about the midplane to large distances where proton are getting accelerated, creating about the current sheet midplane clouds of high energy electrons, which can be the source of hard X-ray emission in the coronal sources of flares. These electrons are ejected into the same footpoint as protons after the latter reach the energy sufficicent to break from a current sheet. In a weaker magnetic field of the heliosphere the bounced electrons with lower energies cannot reach the midplane turning instead at some distance D before the current sheet midplane by 180 degrees from their initial motion. Also the beams of accelerated transit and bounced particles are found to generate turbulent electric fields in a form of Langmuir waves (electrons) or ion-acoustic waves (protons).

X-RAY PROPERTIES OF LOW-MASS PRE-MAIN SEQUENCE STARS IN THE ORION TRAPEZIUM CLUSTER

The Chandra High Energy Transmission Gratings (HETG) Orion Legacy Project (HOLP) is the first comprehensive set of observations of a very young massive stellar cluster which provides high resolution X-ray spectra of very young stars over a wide mass range (0.7 - 2.3 Msun). In this paper, we focus on the six brightest X-ray sources with T Tauri stellar counterparts which are well-characterized at optical and infra-red wavelengths. All stars show column densities which are substantially smaller than expected from optical extinction indicating that the sources are located on the near side of the cluster with respect to the observer as well as that these stars are embedded in more dusty environments. Stellar X-ray luminosities are well above $10^{31}$ erg/s, in some cases exceeding $10^{32}$ erg/s for a substantial amount of time. The stars during these observations show no flares but are persistently bright. The spectra can be well fit with two temperature plasma components of 10 MK and 40 MK, of which the latter dominates the flux by a ratio 6:1 on average. The total EMs range between 3 - 8$\times10^{54}$ cm$^{-3}$ and are comparable to active coronal sources. Limits on the forbidden to inter-combination line ratios in the He-Like K-shell lines show that we observe a predominantely optically thin plasma with electron densities below $10^{12}$ cm$^{-3}$. Observed abundances compare well with active coronal sources underlying the coronal nature of these sources. The surface flux in this sample of 0.6 to 2.3 Msun classical T Tauri stars shows that coronal activity and possibly coronal loop size increase significantly between ages 0.1 to 10 Myrs.

Direct observation of the energy release site in a solar flare by SDO/AIA, Hinode/EIS, and RHESSI

We present direct evidence for the detection of the main energy release site in a non-eruptive solar flare, SOL2013-11-09T06:38UT. This GOES C2.7 event was characterised by two flaring ribbons and a compact, bright coronal source located between them, which is the focus of our study. We use imaging from SDO/AIA, and imaging spectroscopy from RHESSI to characterise the thermal and non-thermal emission from the coronal source, and EUV spectroscopy from the Hinode/EIS, which scanned the coronal source during the impulsive peak, to analyse Doppler shifts in Fe XII and Fe XXIV emission lines, and determine the source density. The coronal source exhibited an impulsive emission lightcurve in all AIA filters during the impulsive phase. RHESSI hard X-ray images indicate both thermal and non-thermal emission at the coronal source, and its plasma temperature derived from RHESSI imaging spectroscopy shows an impulsive rise, reaching a maximum at 12-13 MK about 10 seconds prior to the hard X-ray peak. High redshifts associated with this bright source indicate downflows of 40-250 km/s at a broad range of temperatures, interpreted as loop shrinkage and/or outflows along the magnetic field. Outflows from the coronal source towards each ribbon are also observed by AIA images at 171, 193, 211, 304 and 1600 A. The electron density of the source obtained from a Fe XIV line pair is $10^{11.50}$ which is collisionally thick to electrons with energy up to 45-65 keV, responsible for the source's non-thermal X-ray emission. We conclude that the bright coronal source is the location of the main release of magnetic energy in this flare, with a geometry consistent with component reconnection between crossing, current-carrying loops. We argue that the energy that can be released via reconnection, based on observational estimates, can plausibly account for the non-thermal energetics of the flare.

Coronal Sources and In Situ Properties of the Solar Winds Sampled by ACE During 1999 – 2008

We identify the coronal sources of the solar winds sampled by the ACE spacecraft during 1999-2008, and examine the in situ solar wind properties as a function of wind sources. The standard two-step mapping technique is adopted to establish the photospheric footpoints of the magnetic flux tubes along which the ACE winds flow. The footpoints are then placed in the context of EIT 284~\AA\ images and photospheric magnetograms, allowing us to categorize the sources into four groups: coronal holes (CHs), active regions (ARs), the quiet Sun (QS), and "Undefined". This practice also enables us to establish the response to solar activity of the fractions occupied by each kind of solar winds, and of their speeds and O$^{7+}$/O$^{6+}$ ratios measured in situ. We find that during the maximum phase, the majority of ACE winds originate from ARs. During the declining phase, CHs and ARs are equally important contributors to the ACE solar winds. The QS contribution increases with decreasing solar activity, and maximizes in the minimum phase when QS appear to be the primary supplier of the ACE winds. With decreasing activity, the winds from all sources tend to become cooler, as represented by the increasingly low O$^{7+}$/O$^{6+}$ ratios. On the other hand, during each activity phase, the AR winds tend to be the slowest and associated with the highest O$^{7+}$/O$^{6+}$ ratios, and the CH winds correspond to the other extreme, with the QS winds lying in between. Applying the same analysis method to the slow winds only, here defined as the winds with speeds lower than 500 km s$^{-1}$, we find basically the same overall behavior, as far as the contributions of individual groups of sources are concerned. This statistical study indicates that QS regions are an important source of the solar wind during the minimum phase.

The Compton hump and variable blue wing in the extreme low-flux NuSTAR observations of 1H0707−495

The narrow-line Seyfert I galaxy, 1H0707−495, has been well observed in the 0.3–10 keV band, revealing a dramatic drop in flux in the iron Kα band, a strong soft excess, and short time-scale reverberation lags associated with these spectral features. In this paper, we present the first results of a deep 250-ks NuSTAR (Nuclear Spectroscopic Telescope Array) observation of 1H0707−495, which includes the first sensitive observations above 10 keV. Even though the NuSTAR observations caught the source in an extreme low-flux state, the Compton hump is still significantly detected. NuSTAR, with its high effective area above 7 keV, clearly detects the drop in flux in the iron Kα band, and by comparing these observations with archival XMM–Newton observations, we find that the energy of this drop increases with increasing flux. We discuss possible explanations for this, the most likely of which is that the drop in flux is the blue wing of the relativistically broadened iron Kα emission line. When the flux is low, the coronal source height is low, thus enhancing the most gravitationally redshifted emission.

Identification of coronal sources of the solar wind from solar images in the EUV spectral range

Methods of localizing coronal sources of the solar wind (SW), such as coronal holes, quasi-stationary fluxes from active regions, and transient sources associated with small-scale active phenomena are considered based on vacuum-ultraviolet (EUV) images of the corona at low solar activity during the initial period of the 24th solar cycle (2010). It is shown that a SW velocity profile can be calculated from the relative areas of coronal holes (CH) at the central part of the disk based on the images in the ranges of 193 and 171 A. The images in the 193 A describe the geometry of large HCs that represent sources of fast SW well. The images in 171 A are a better visualization of small CHs, based on which the profile of a slow SW component was calculated to a high accuracy (up to 65 km/s). According to Hinode/EIS data of October 15, 2010, using the Doppler spectroscopy method at the streamer base over the active region 11112, the source of the outgoing plasma flux with the mean velocity of 17 km/s was localized in the magnetic field region with an intensity of less than 200 Gauss. According to the estimate, the density of the plasma flux from this source is an order of magnitude greater than the value required for explaining the distinction between the calculated and measured profiles of a slow SW velocity. For finding the transient SW component based on small-scale flare activity, SW parameters were analyzed for the periods of flares accompanied by coronal mass ejections (CMEs), and for the periods without flares, according to the data obtained in 2010 from the ACE and GOES satellites and by coronagraphs on the STEREO-A and -B spacecraft. The ion ratios C+6/C+5 and O+7/O+6 and the mean charge of Fe ions for periods with flares were shown to be shifted toward large values, suggesting the presence of a hot SW component associated with flare activity. A noticeable correlation between the maximum charge of Fe ions and the peak power of a flare, previously observed for flares of a higher class, was confirmed. The mean value of the SW flux density during the periods of flares was 30% higher than that in the periods without flares, which is possibly associated also with the growth of fluxes from other sources with an increasing solar activity level. Based on the example of a series of flares of October 13–14, 2010, it was supposed that transient SW fluxes from the weak flares at low solar activity can manifest themselves in the form of interplanetary ICME-transients.