Core-shell Morphology Research Articles

Cytocompatible Hyperbranched Polyesters Capable of Altering the Ca2+ Signaling in Neuronal Cells In Vitro.

Synthetic hyperbranched polyesters with potential therapeutic properties were synthesized using the bifunctional polyethylene glycol or PEG with different molecular weights, ca., 4000, 6000, and 20,000 g/mol, and the trifunctional trans-aconitic acid or TAA. During polycondensation, a fixed amount of PEG was allowed to react with varying amounts of TAA (1:1 and 1:3) to control the branching extents. It was found that the synthetic polyesters had a considerable yield and were highly water soluble. Spectroscopic data (Fourier transform infrared and 1H NMR) confirmed the polyester formation; the branching percentages were determined from 1H NMR spectroscopy which varied from 73% to 22% among the synthesized samples. As the molecular weight of PEG was increased, the branching percentage drastically dropped. All polyesters were found to be negatively charged due to the ionization of unreacted -COOH in the branched ends at the working pH (7.4). Both the hydrodynamic size and intrinsic viscosity were found to reduce as the branching extent increased. Among the sets of polyesters, the one with the highest branching percentage (73%) showed the core-shell morphology (evident from field emission scanning electron microscopy and transmission electron microscopy studies). It also exhibited the highest efficiency toward Ca2+ influx in neuronal cells due to the unique morphology and the negatively charged surface. Nevertheless, this particular grade of polyester along with all the other grades was cytocompatible and induced reactive oxygen species generation. Since the maximally branched grade was highly efficient in altering the Ca2+ signaling through stronger influx, it may well be tested for treating neuronal disorders in vivo in future.

Mean-field homogenization of liquid metal elastomer composites: comparative study and exact dilute solution of core–shell inclusion

Liquid metal-elastomer composites (LMECs) have gathered significant attention for their potential applications in various functional stretchable devices, with inclusion sizes ranging from micrometers to nanometers. These composites exhibit exceptional properties, such as high electric permittivity and thermal conductivity, surpassing those of the elastomer matrix, thus enabling a broader range of applications without compromising the material's stretchability. To investigate the diverse effective elastic and functional properties of LMECs, micromechanics-based homogenization method based on Eshelby's inclusion solution are invaluable. However, the extreme contrast in elastic constants among the phases in LMECs, particularly for nanosized inclusions where a considerable amount of stiff metal oxide forms around the inclusions, can lead to critical failure in predicting effective properties if inadequate homogenization approach is employed. In this study, we present multiple mean-field homogenization approaches applicable to LMECs with core-shell morphology, namely: (i) multi-phase, (ii) sequential, (iii) pseudo-grain, and (iv) direct approaches. We compare the accuracy of the models concerning effective elastic, thermal, and dielectric properties, evaluated against numerical homogenization results and compared with reported experimental data. Specifically, we highlight homogenization scheme utilizing exact field solutions of dilute core-shell inclusion, emphasizing the importance of accurately capturing the field in the micromechanics of LMECs. Furthermore, we demonstrate that widely utilized interphase model could not properly resolve the core-shell morphology and thus should be avoided. This comprehensive assessment provides critical insights into the proper homogenization strategies for designing advanced LMECs with precise prediction of effective properties.

Designing tortuous gas diffusion path for hydrogen oxidation reaction and stability of solid oxide fuel cell: An engineered microstructural aspect in anode functional layer

Commercialization of solid oxide fuel cell (SOFC) is restricted due to long term performance degradation. SOFC is activated by diffusion of gasses through porous electrodes to the electrochemical active sites termed as triple phase boundary (TPB). Among all other parameters, tortuosity influences the functionality of TPB and is responsible for gas transport which relates its bulk diffusion and its migration through the porous electrode. The novelty of present research lies in designing of optimum tortuous gas diffusion path for effective hydrogen oxidation reaction through engineered morphology of anode functional layer. The study involves the fabrication of anode for planar SOFC using four configurations. Configuration A and B involves anode monolith synthesized through conventional route [(40 vol % Ni in dispersed-8 mol % Yttria stabilized zirconia (SZ)] and functional core-shell Ni@SZ. Configuration C (trilayer anode, TLA) is designed to have graded matrix with conventional Ni-SZ (fuel inlet side), 28 vol% Ni@SZ acting as active layer and 32 vol % Ni@SZ sandwiched in between. Configuration D consists of Ni@SZ as the active layer onto conventional Ni-SZ support. TLA is found to have minimum tortuosity (τ = 2) with maximum cell endurance for 2000 h (2.06–8.2 %/1000 h@800 °C under load). Ni@SZ with unimodal pore distribution is capable of reducing the activation barrier for charge migration (14 kJmol-1) compared to Ni-SZ (32 kJmol-1) with multimodal pores. This results in higher redox tolerance for Configuration B-D (4–7 % conductivity degradation/20 cycles) compared to Configuration A (27% conductivity degradation/20 cycles). Post mortem analyses of microstructure support the retention of core-shell morphology of Ni@SZ with lower deterioration.

Revealing nanoscale structure and interfaces of protein and polymer condensates via cryo-electron microscopy.

Liquid-liquid phase separation (LLPS) is a ubiquitous demixing phenomenon observed in various molecular solutions, including in polymer and protein solutions. Demixing of solutions results in condensed, phase separated droplets which exhibit a range of liquid-like properties driven by transient intermolecular interactions. Understanding the organization within these condensates is crucial for deciphering their material properties and functions. This study explores the distinct nanoscale networks and interfaces in the condensate samples using a modified cryo-electron microscopy (cryo-EM) method. The method involves initiating condensate formation on electron microscopy grids to limit droplet growth as large droplet sizes are not ideal for cryo-EM imaging. The versatility of this method is demonstrated by imaging three different classes of condensates. We further investigate the condensate structures using cryo-electron tomography which provides 3D reconstructions, uncovering porous internal structures, unique core-shell morphologies, and inhomogeneities within the nanoscale organization of protein condensates. Comparison with dry-state transmission electron microscopy emphasizes the importance of preserving the hydrated structure of condensates for accurate structural analysis. We correlate the internal structure of protein condensates with their amino acid sequences and material properties by performing viscosity measurements that support that more viscous condensates exhibit denser internal assemblies. Our findings contribute to a comprehensive understanding of nanoscale condensate structure and its material properties. Our approach here provides a versatile tool for exploring various phase-separated systems and their nanoscale structures for future studies.

Novel biopolymeric chitosan-urea-based core-shell hydrogel for use in sustainable agriculture

Agricultural sustainability is a major issue in recent times, deficiency of water as well as insufficient fertilizer to the crop is a main reason for it. This work is focused on core-shell hydrogel aiming to overcome the agricultural issues of water as well as deficiency of fertilizer to the plant. The core-shell hydrogel was prepared by incorporating urea in κ-carrageenan to be part of the controlled release mechanism of the core of the hydrogel. Chitosan was used for the shell structure to prepare over the core and cross-linked by the cations of the salts. The prepared hydrogel was termed as Chitosan-κ-carrageenan-Urea (CK-CU). Four different types of hydrogels were prepared with the different compositions named as CK-CU 2, CK-CU 5, CK-CU 7.5 and CK-CU 10 as varying with the ratio of 2 %, 5 %, 7.5 % and 10 % of urea respectively. The core-shell morphology structure was verified with Scanning electron microscopy (SEM) in which the complete coverage of the κ-carrageenan core by a consistent chitosan shell has been verified. Fourier transform infrared spectroscopy (FTIR) was utilized to confirm the composition of the hydrogel. Thermo-gravimetric analysis (TGA) was also performed for checking the thermal endurance of the hydrogel. The release rate of the urea was determined under Ultraviolet Visible spectroscopy. The swelling index, dewatering, and urea release rate of optimized CK-CU 10 hydrogel were found to 121 %, 21.22 %, and 70.4 % respectively. The developed Core-Shell hydrogel exhibits significant promise as a vehicle for fertilizer and as a soil conditioner in agricultural applications especially in arid and semi-arid areas.

Sulfur and nitrogen co-doped Ni/Co carbide 3D polyhedron nanoparticles with hollow core for hybrid supercapacitors

The methodologies for the synthesis of core-shell multilayered morphologies are being intensely explored. Following such scenarios, we report the fabrication of sulfur (S) and nitrogen (N) co-doped nickel/cobalt carbide (S,N@Ni/Co–C) hollow (carbon matrix) polyhedral nanoparticles (PNPs) by facile solvothermal and sulfurization process. The main objective of this research is to study the anomaly behind the structural deformation of the PNPs during the annealing and to propose a relevant method to preserve them by enhancing their abilities. Additionally, the electrochemical properties of the S, N@Ni/Co–C/nickel foam (NF) electrode are optimized and examined, exhibiting a high areal capacity of 563.3 μAh cm−2 and a notable cycling retention of 96 % at 7 mA cm−2 for 5000 cycles in a three-electrode system. Furthermore, the optimized electrode is employed as a positive electrode along with an activated carbon-coated NF as a negative electrode to fabricate a hybrid supercapacitor device which delivers a maximum energy density of 118.9 μAh cm−2 and a maximum power density of 7000 μA cm−2. Finally, it is used as a power source to drive a few real-time electronic devices, especially safety E-bands.

Preparation and characterization of peptide-modified core-shell fibrous substrates with UV-blocking properties for corneal regeneration applications

Effective UV protection is a key aspect of substrates directly exposed to UV radiation. Therefore, in the present study, fibrous substrates of core–shell morphology (PCL-core, PVP-shell) containing peptides based on tryptophan, tyrosine and cysteine (W6, YYC2 and YYC3) were prepared. Spectrophotometric studies showed UV absorption by peptides containing tyrosine and tryptophan in the UVB (up to 80%) and UVA (up to 40%) ranges. Cysteine, in turn, contributed to high antioxidant properties, confirmed by DPPH assay. The presence of peptides contributed to a nonwoven fabric characterized by the ability to absorb UV radiation and prevent the occurrence of oxidative stress (caused by the presence of free radicals). In turn, the increase in the surface zeta potential of the nonwoven after UV irradiation and higher thermal stability (demonstrated by DSC studies) indicated the crosslinking of the PVP layer under UVR, which further contributes to the increased protection of the nonwoven against its effects. In summary, obtained nonwoven exhibited functional similarity to the native cornea, providing a potential solution for enhancing corneal tissue engineering and regenerative medicine applications.

Zn-Al Ferrite/Polypyrrole Nanocomposites: Structure and Dielectric and Magnetic Properties for Microwave Applications.

In this study, Zn-Al ferrite/polypyrrole (PPy) nanocomposites were synthesized and thoroughly characterized to explore their potential for microwave applications. X-ray diffraction analysis confirmed the presence of ZnO, AlFeO3, and Fe2O3 phases, with the crystal size decreasing from 31 nm to 19.6 nm as aluminum content increased. High-resolution transmission electron microscopy (HR-TEM) revealed a distinctive core-shell morphology, where the polypyrrole encapsulates the ZnAlxFe2-xO4 particles. Magnetic measurements showed that decreasing aluminum concentration led to a reduction in both saturation magnetization (Ms) from 75 emu/g to 36 emu/g and remanent magnetization (Mr) from 2.26 emu/g to 2.00 emu/g. Dielectric analysis indicated that both the real (ε') and imaginary (ε″) components of dielectric permittivity decreased with increasing frequency, particularly between 10 and 14 GHz. Furthermore, electrical modulus analysis highlighted the significant impact of aluminum doping on relaxation time (τIP), indicating the presence of interface polarization. Impedance spectroscopy results underscored the dominance of interface polarization at lower frequencies and the presence of strong conduction paths at higher frequencies. These combined magnetic and dielectric loss mechanisms suggest that the Zn-Al ferrite/polypyrrole nanocomposite is a promising candidate for advanced microwave absorption applications.

Effect of deposition potential and KOH concentration on ethanol oxidation reaction with Pd nanoparticles electrodeposited on glassy carbon from reline

Pd nanoparticles (PdNPs) are deposited electrochemically on the glassy carbon electrode surface using PdCl2 dissolved in a deep eutectic solvent composed of choline chloride and urea (reline). The morphology and particle size of the PdNPs are determined from SEM exhibiting a homogeneous distribution with potential deposition depending on particle size. The particles display a core-shell morphology, consisting of Pd(0) as the core and Pd(OH)2 as the shell. The ethanol oxidation reaction, EOR, is evaluated at different KOH concentrations. The electrocatalyst with the highest mass activity is achieved at −750 mV potential deposition and 1 M KOH, exhibiting 3126 ± 606 mAmgPd−1. However, when 0.1 M KOH is used the mass activity decreases to one-third the value obtained at 1 M KOH. Notwithstanding, the mass activity displayed by these PdNPs is superior to that reported for other Pd-based nanoparticles synthesized using more complex, time-consuming and costly methods reported in the literature.

MFe2O4 (M: Cu, Ni)/SnS2magnetic Core-Shell Heterostructure for Photocatalytic H2 Generation and Environmental Remediation

Overgrowing demand for sustainable energy sources and environmental remediation has driven extensive research in the field of photocatalysis. This study presents a hydrothermal synthesis of a novel MFe2O4 (M: Cu, Ni)/SnS2 magnetic core-shell heterostructure. The engineered heterostructure combines the unique properties of MFe2O4 (M: Cu, Ni) magnetic crystal as a core with SnS2 nanosheets as a shell, aiming to exploit type-2 heterojunction properties to improve effects for improved photocatalytic performance. The structural chemistry, phase formation, and crystal orientation of the prepared material are investigated using various analytical techniques, including X-ray diffraction (XRD), transmission electron microscopy (TEM), Raman, and FTIR Spectroscopy. FE-SEM analysis reveals a well-defined core-shell morphology with intimate interfaces between MFe2O4 (M: Cu, Ni) crystals and SnS2 nanosheets. Photocatalytic efficiency is assessed through the industrial dye degradation process. The influence of the heterostructure's structural features on the photocatalytic activity is explored through density function theory, emphasizing the role of the core-shell interface and the magnetic properties of MFe2O4 (M: Cu, Ni) cores. The chemistry between the magnetic core and the shell in the heterostructure is demonstrated to be crucial for optimizing charge carrier dynamics and promoting surface reactions. Photocatalytic H2 generation under artificial simulated sunlight irradiation in the presence of MFe2O4 (M: Cu, Ni)/SnS2 core-shell heterostructure is demonstrated. This study not only presents a novel MFe2O4 (M: Cu, Ni)/SnS2 heterostructure for photocatalytic H2 generation but also provides valuable insights into the intricate relationship between structural chemistry and photocatalytic efficiency. The engineered heterostructure shows promising potential for applications in sustainable energy production and environmental remediation, contributing to the ongoing efforts towards a cleaner and more sustainable future.

Brine treatment using fluidized bed homogeneous crystallization technology for the simultaneous recovery of calcium and magnesium as dolomite-like granules

Fluidized bed homogeneous crystallization (FBHC) technology is an effective method to treat metal-contained wastewater at ambient temperature and pressure. Seawater desalination is common to produce fresh water and concentrated brine. This highly hardness-contained brine decreases the lifetime of membranes by fouling during desalination process. This study recovers calcium and magnesium by carbonate reagent from synthetic brine wastewater to be dolomite-like particles. The greatest total removal is 90.7 % for calcium and 76.0 % for magnesium, with a crystallization ratio of 89.5 % for Ca and 75.7 % for Mg, using a 40 min of hydraulic retention time, 9.5 of effluent pH, 2.0 of molar ratio, and 24 of reflux ratio. The effluent from the fluidized bed reactor (FBR) is aged in a sedimentation tank for 24 h to increase removal efficiency to 99.98 % for Ca and 84.7 % for Mg. XRD, SEM, FTIR, and Raman analysis reveal that particles are composed of CaCO3·H2O and MgCO3·3H2O with a dolomite-like structure and a core-shell morphology. In a real brine wastewater treatment by FBHC system, 86 % of Ca and 74 % of Mg are crystallized, so disposal costs are 75 % less than those for chemical precipitation, a conventional treating method. Therefore, FBHC technology has high potential to treat hardness-contained brine by reclaiming as dolomite-like granules.

Synthesis and characterization of cellulose fibers modified zinc phosphate/hydroxyapatite core-shell as enhanced carrier of cisplatin: Loading, release, and cytotoxicity

The uncontrolled administration of the cisplatin drug (CPTN) resulted in numerous drawbacks. Therefore, effective, affordable, and biocompatible delivery systems were suggested to regulate the loading, release, and therapeutic effect of CPTN. Zinc phosphate/hydroxyapatite hybrid form (ZP/HP) and core-shell nano-rod morphology, as well as its functionalized derivative with cellulose (CF@ZP/HP), were synthesized by the facile dissolution precipitation method followed by mixing with cellulose fibers, respectively. The developed CF@ZP/HP displayed remarkable enhanced CPTN loading properties (418.2 mg/g) as compared to ZP/HP (259.8 mg/g). The CPTN loading behaviors into CF@ZP/HP follow the Langmuir isotherm properties (R2 > 0.98) in addition to the kinetic activities of the pseudo-first-order model (R2 > 0.96). The steric assessment validates the notable increase in the existing loading receptors after the functionalization of ZP/HP with CF from 57.7 mg/g (ZP/HP) to 90.5 mg/g. The functionalization also impacted the capacity of each existing receptor to be able to ensure 5 CPTN molecules. This, in addition to the loading energies (<40 kJ/mol), donates the loading of CPTN by physical multi-molecular processes and in vertical orientation. The CPTN releasing patterns of CF@ZP/HP exhibit slow and controlled properties (95.7 % after 200 h at pH 7.4 and 100 % after 120 h at pH 5.5), but faster than the properties of ZP/HP. The kinetic modeling of the release activities together with the diffusion exponent (>0.45) reflected the release of CPTN according to both erosion and diffusion mechanisms. The loading of CPTN into both ZP/HP and CF@ZP/HP also resulted in a marked enhancement in the anticancer activity of CPTN against human cervical epithelial malignancies (HeLa) (cell viability = 5.6 % (CPTN), 3.2 % (CPTN loaded ZP/HP), and 1.12 % (CPTN loaded CF@ZP/HP)).

MOF-on-MOF-derived FeCo@NC OER&ORR bifunctional electrocatalysts for zinc-air batteries

Zinc-air batteries, as one of the emerging areas of interest in the quest for sustainable energy solutions, are hampered by the intrinsically sluggish kinetics of the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER), and still suffer from the issues of low energy density. Herein, we report a MOF-on-MOF-derived electrocatalyst, FeCo@NC-II, designed to efficiently catalyze both ORR (Ehalf = 0.907 V) and OER (Ej=10 = 1.551 V) within alkaline environments, surpassing esteemed noble metal benchmarks (Pt/C and RuO2). Systematically characterizations and density functional theory (DFT) calculations reveal that the synergistic effect of iron and cobalt bimetallic and the optimized distribution of nitrogen configuration improved the charge distribution of the catalysts, which in turn optimized the adsorption / desorption of oxygenated intermediates accelerating the reaction kinetics. While the unique leaf-like core–shell morphology and excellent pore structure of the FeCo@NC-II catalyst caused the improvement of mass transfer efficiency, electrical conductivity and stability. The core and shell of the precursor constructed through the MOF-on-MOF strategy achieved the effect of 1 + 1 > 2 in mutual cooperation. Further application to zinc-air batteries (ZABs) yielded remarkable power density (212.4 mW/cm2), long cycle (more than 150 h) stability and superior energy density (∼1060 Wh/kg Zn). This work provides a methodology and an idea for the design, synthesis and optimization of advanced bifunctional electrocatalysts.

A novel photothermal-assisted FeNi2S4@Mn0.3C0.7S S-scheme heterojunction for enhanced photo-catalytic hydrogen evolution

In addition to the intrinsic driving force of photocatalysis, the external thermal field from the photothermal effect can provide additional energy to the photo-catalytic system to improve the photo-catalytic hydrogen-evolution (PHE) efficiency. Herein, based on the results of density functional theory, we designed and constructed a hollow core–shell FeNi2S4@Mn0.3Cd0.7S (NFS@MCS) S-scheme heterojunction with a photothermal effect, thereby realising a significant enhancement of the PHE performance due to the thermal effect, S-scheme heterojunction and hollow core–shell morphology. As a light collector and heat source, the hollow NFS could absorb and convert photons into heat, resulting in the increased local temperature of photocatalyst particles. Moreover, the S-scheme charge path at the interface not only improved the carrier separation efficiency but also retained a higher redox potential. All these are favourable to increase the PHE activity. The PHE tests show that 0.5 %-NFS@MCS exhibits the highest PHE rate of 17.11 mmol·g−1·h−1, 7.7 times that of MCS. Moreover, through a combination of theoretical calculation and experimental evidence, the PHE mechanism of the NFS@MCS system is discussed and clarified in-depth.

Revealing Structural Evolution of Nickel Phosphide-Iron Oxide Core-Shell Nanocatalysts in Alkaline Medium for the Oxygen Evolution Reaction.

Metal phosphide-containing materials have emerged as a potential candidate of nonprecious metal-based catalysts for alkaline oxygen evolution reaction (OER). While it is known that metal phosphide undergoes structural evolution, considerable debate persists regarding the effects of dynamics on the surface activation and morphological stability of the catalysts. In this study, we synthesize NiP x -FeO x core-shell nanocatalysts with an amorphous NiP x core designed for enhanced OER activity. Using ex situ X-ray absorption spectroscopy, we elucidate the local structural changes as a function of the cyclic voltammetry cycles. Our studies suggest that the presence of corner-sharing octahedra in the FeO x shell improves structural rigidity through interlayer cross-linking, thereby inhibiting the diffusion of OH-/H2O. Thus, the FeO x shell preserves the amorphous NiP x core from rapid oxidation to Ni3(PO4)2 and Ni(OH)2. On the other hand, the incorporation of Ni from the core into the FeO x shell facilitates absorption of hydroxide ions for OER. As a result, Ni/Fe(OH) x at the surface oxidizes to the active γ-(oxy)hydroxide phase under the applied potentials, promoting OER. This intriguing synergistic behavior holds significance as such a synthetic route involving the FeO x shell can be extended to other systems, enabling manipulation of surface adsorption and diffusion of hydroxide ions. These findings also demonstrate that nanomaterials with core-shell morphologies can be tuned to leverage the strength of each metallic component for improved electrochemical activities.

Anchoring ZnIn2S4 nanosheets on cross-like FeSe2 to construct photothermal-enhanced S-scheme heterojunction for photocatalytic H2 evolution

Rational design of the morphology and heterojunction to accelerate the separation of electron-hole pairs has played an indispensable role in improving the photocatalytic hydrogen evolution. ZnIn2S4 (ZIS) has aroused considerable attention in solar-to-chemical energy conversion due to its remarkable photoelectrical properties and relatively negative energy band, whereas it still suffers from the severe photogenerated carrier recombination and catalyst aggregation. Herein, guided by density functional theory calculations, the constructed FeSe2@ZnIn2S4 (FS@ZIS) heterojunction model has a hydrogen Gibbs free energy closer to zero compared with pure ZIS and FS, which is beneficial for hydrogen adsorption and desorption on the photocatalyst surface. Therefore, a novel cross-like core–shell FS@ZIS Step-scheme (S-scheme) heterojunction was synthesized successfully by in-situ growing ZIS nanosheets on the surface of cross-like FS. The structure with cross-like core–shell morphology not only inhibits the agglomeration of ZIS to increase specific surface area, but also provides a tight interface with S-scheme heterojunction. Moreover, the S-scheme heterojunction with a tight interface can effectively separate electron-hole pairs, leaving photoinduced charges with higher potentials. Furthermore, FS@ZIS-20 possesses exceptional photothermal capabilities, enabling the conversion of optical energy from visible and near infrared light to heat, thereby further enhancing the photocatalysis reaction. As a result, the cross-like core–shell FS@ZIS S-scheme heterojunction exhibits an excellent photocatalytic hydrogen evolution rate (7.640 mmol g−1 h−1), which is 24 times higher than that of pure ZIS (0.319 mmol g−1 h−1) under visible and near infrared light. Furthermore, employing more in-depth density functional theory calculations further investigates the charge transfer pathway of the FS@ZIS S-scheme heterojunction. This work provides insights into the construction of S-scheme heterojunctions with core–shell structure and photothermal effect for photocatalytic evolution hydrogen.

Technical note: Characterization of a single-beam gradient force aerosol optical tweezer for droplet trapping, phase transition monitoring, and morphology studies

Abstract. Single particle analysis is essential for a better understanding of the particle transformation process and to predict its environmental impact. In this study, we developed an aerosol optical tweezer (AOT) Raman spectroscopy system to investigate the phase state and morphology of suspended aerosol droplets in real time. The system comprises four modules: optical trapping, reaction, illumination and imaging, and detection. The optical trapping module utilizes a 532 nm laser and a 100 × oil immersion objective to stably trap aerosol droplets within 30 s. The reaction module allows us to adjust relative humidity (RH) and introduce reaction gases into the droplet levitation chamber, facilitating experiments to study liquid–liquid phase transitions. The illumination and imaging module employs a high-speed camera to monitor the trapped droplets, while the detector module records Raman scattering light. We trapped sodium chloride (NaCl) and 3-methyl glutaric acid (3-MGA) mixed droplets to examine RH-dependent morphology changes. Liquid–liquid phase separation (LLPS) occurred when RH was decreased. Additionally, we introduced ozone and limonene/pinene to generate secondary organic aerosol (SOA) particles in situ, which collided with the trapped droplet and dissolved in it. To determine the trapped droplet's characteristics, we utilized an open-source program based on Mie theory to retrieve diameter and refractive index from the observed whispering gallery modes (WGMs) in Raman spectra. It is found that mixed droplets formed core–shell morphology when RH was decreased, and the RH dependence of the droplets' phase transitions generated by different SOA precursors varied. Our AOT system serves as an essential experimental platform for in situ assessment of morphology and phase state during dynamic atmospheric processes.

Thermoresponsive Core-cross-linked Nanoparticles from HA-b-ELP Diblock Copolymers.

Stabilization against the dilution-dependent disassembly of self-assembled nanoparticles is a requirement for in vivo application. Herein, we propose a simple and biocompatible cross-linking reaction for the stabilization of a series of nanoparticles formed by the self-assembly of amphiphilic HA-b-ELP block copolymers, through the alkylation of methionine residues from the ELP block with diglycidyl ether compounds. The core-cross-linked nanoparticles retain their colloidal properties, with a spherical core-shell morphology, while maintaining thermoresponsive behavior. As such, instead of a reversible disassembly when non-cross-linked, a reversible swelling of nanoparticles' core and increase of hydrodynamic diameter are observed with lowering of the temperature.

Hard template assisted synthesis of iron-cobalt phosphide core-shell for the enhanced electrochemical detection of fenitrothion

Pesticides have an unprecedented concern in food safety as bioaccumulation occurs in the human body and causes various side effects. The electrochemical sensor attracts researchers with quick response, higher accuracy, and ease of carry for on-site detection. Herein, we prepare the hard template-assisted synthesis of Iron-Cobalt Phosphide (FCP) Core-shell for the electrochemical detection of fenitrothion (FN). The core–shell morphology of FCP supports with the enhancement of intrinsic activity, such as excellent mass transfer toward the electrochemical detection of FN with the glassy carbon electrode (GCE). The differential pulse voltammetry (DPV) analysis of FN using FCP/GCE tested with the range of 0.001 to 850 µM of FN, the superior catalytic activity of FCP/GCE achieves the limit of detection (LoD) and sensitivity of 38.1 nM and 1.122 µA µM−1 cm−2 respectively. Moreover, the FN analysis using FCP/GCE tested with the vegetable samples achieves excellent recovery results of FN with the grapes, tomato, corn, and cauliflower samples. The results of the repeatability, reproducibility, and storage stability test of FCP/GCE suggest the excellent practical feasibility of the FCP/GCE sensor.

Peculiarities of Emulsions Stabilized by Stimuli-Responsive Interpenetrating Polymeric Network Microgels.

Emulsions have become a crucial product form in various industries in modern times. Expanding the class of substances used to stabilize emulsions can improve their stability or introduce new properties. Particularly, the use of stimuli-responsive microgels makes it possible to create "smart" emulsions whose stability can be controlled by changing any of the specified stimuli. Thus, finding new ways to stabilize emulsions may broaden their application. In this work, for the first time, we applied microgels based on interpenetrating polymeric networks (IPNs) of poly(N-isopropylacrylamide) (PNIPAM) and poly(acrylic acid) (PAA) as stabilizing agents for "oil-in-water" emulsions. We have demonstrated that emulsions stabilized by such soft particles can remain colloidally stable for an extended period, even after being heated up to 40 °C, which is above the lower critical solution temperature (LCST) of PNIPAM. On the contrary, the emulsions stabilized by PNIPAM homopolymer microgels were broken upon heating. To understand the stabilization mechanism of the emulsions, mesoscopic computer simulations were performed to study the IPN microgels at the liquid-liquid interface. The simulations demonstrated that when the first subnetwork (PNIPAM) collapses, the particle adopts a flattened core-shell morphology with a highly swollen PAA-rich shell and a collapsed PNIPAM-rich core. Unlike its PNIPAM homopolymer counterpart, the IPN microgel maintains its three-dimensional shape, which provides stability to the microgel-based emulsions over a wide range of temperatures. Our combined findings could be useful in developing new approaches to emulsions' storage, biphasic catalysis, and lubrication of mechanisms in various operating and climatic conditions.