Copper Ion Concentration Research Articles

Uncovering mechanism of excessive copper ion-activated depressed-sphalerite under moderate alkaline conditions: A combined experimental and DFT investigation

Currently, extensive research exists on the activation mechanisms of sphalerite, yet there is a notable absence of studies on the mechanisms behind the activation of depressed sphalerite. This paper investigates the mechanism through which moderate or excessive copper ions activate depressed sphalerite under conditions (pH 9–10) of moderate alkalinity, employing a comprehensive approach that includes pure mineral flotation experiments, contact angle measurements, FESEM-EDS, XPS, and density functional theory simulations.The results from pure mineral flotation experiments reveal that, at a copper ion concentration of 1 × 10−4 mol/L, sphalerite, previously depressed by zinc sulfate, is activated by copper ions, achieving a recovery rate of 91.46 % with butyl xanthate as the collector. However, when more cooper ions are added, the recovery of sphalerite decreases. Contact angle measurements and FESEM-EDS data indicate that under conditions of moderate alkalinity, zinc sulfate undergoes hydrolysis to form hydrophilic colloidal substances (hydroxylated zinc) that adhere to the surface of sphalerite, rendering it hydrophilic and thereby depressed. Following the introduction of copper ions, a dense striated material forms on the surface of sphalerite previously inhibited by zinc sulfate, enhancing its hydrophobicity, but if more copper ions were added, the hydrophobicity of activated sphalerite will be weakened. XPS findings further suggest that activated sphalerite by copper is capable of forming polysulfides, which then act on the sphalerite. DFT simulations verify that under moderate alkalinity conditions, copper ions first undergo a hydroxylation reaction in the solution before adsorbing or precipitating on the mineral surface as hydroxylated substances, which subsequently interact with sulfur on the surface of sphalerite. The analysis of the density of states indicates that following the addition of butyl xanthate, the strongest 3p orbital electron peak of the sulfur atom bound to butyl xanthate and the strongest 3d orbital electron peak of zinc are at distinct energy levels, suggesting that the overlap of the electronic density of states is minimal, indicating a weak and unstable interaction between the sulfur and zinc atoms bonded with butyl xanthate. Conversely, the strongest 3p orbital electron peak of the sulfur atom bonded with butyl xanthate overlaps with the strongest 3d orbital electron peak of copper and is positioned near the Fermi level, signifying a strong reactivity and more stable interaction between the sulfur and copper atoms.

Comprehensive study on copper adsorption using an innovative graphene carbonate sand composite adsorbent: Batch, fixed-bed columns, and CFD modeling insights

This study focused on an innovative graphene carbonate sand composite adsorbent, synthesized from carbonated porous sand and sucrose as raw materials, for the removal of copper ions via the adsorption process. The characteristics of this adsorbent are determined through comprehensive experiments and numerical simulations in batch and fixed-bed column conditions, which has not been extensively explored. Extensive experimentation demonstrated a remarkable 100 % removal efficiency under optimal conditions, which included a copper ion concentration of 3 g/L, a contact time of 10 h, and an adsorbent dosage of 35 g/L. The adsorption kinetics and isotherm results exhibited that the Elovich model (R² = 0.998) and the Langmuir model (R² = 0.996 for linear with qm=123.91 mg g-1, and R² = 0.993 for nonlinear fitting) more effectively described the adsorption of copper onto the adsorbent. In the fixed-bed column studies, among the well-known analytical models, the Log-Gompertz model showed better compatibility (R2 = 0.97∼0.99) between breakthrough curves with experimental results for various copper inlet concentrations. Also, numerical results obtained using computational fluid dynamics and mass transfer simulations with the linear driving force model were successfully validated by experimental results, particularly in the initial and transition zones of the breakthrough curve.

Acute copper stress showed toxic effects on the physiological metabolism of Ulva lactuca, a common green macroalgae

The pollution by heavy metals in coastal waters has gradually intensified due to industrial development. In this study, physiological responses of Ulva lactuca, one of the most common green seaweeds with important ecological and economic value in the global intertidal zone, to acute copper stress were investigated. Results showed that an increase in copper ions concentration significantly inhibited photosynthetic activity and inorganic nitrogen utilization by U. lactuca but, increased its respiration. Copper stress limited the activity and gene expression of enzymes related to carbon and nitrogen assimilation of U. lactuca. Under moderate copper stress, U. lactuca had higher soluble carbohydrate and soluble protein contents, whereas under high copper stress, these components decreased sharply. Copper stress increased malonaldehyde content, and relative electrical conductivity in U. lactuca, but changes in antioxidant enzyme activities were not significant and even slightly decreased. Moreover, the contents of 8-hydroxy-deoxyguanosine and polyADP ribose polymerase in U. lactuca increased by high Cu2+ concentration culture, indicating that oxidative damage caused by high Cu2+ level involved its DNA damage and interfered with DNA repair in the alga. Copper stress seemed to be more damaging to the carbon assimilation process of U. lactuca, resulting in weakened resistance to copper stress and lower growth rate. This reflected the threat of coastal high copper stress to intertidal biodiversity. This provided ecological reference for the assessment of offshore heavy metal pollution represented by copper.

Pyrite Depression by Sodium Metabisulfite in Freshwater and Seawater with Copper Activation

Pyrite has natural floatability and thus readily enters valuable mineral flotation concentrates, diluting their quality and decreasing their economic value. Its separation is challenging, depending on process conditions, the presence of activating ions, and water quality, particularly in regions where seawater is used. This study examines the effect of various doses of sodium metabisulfite (SMBS) on pyrite depression in freshwater and seawater under weakly alkaline conditions and with different copper ion concentrations. Without the addition of activators or depressants, pyrite recovery is 40% in freshwater and 60% in seawater, whereas with 10 ppm of SMBS, recoveries drop to 28% and 38%, respectively. The addition of 10 ppm Cu2+ increases recovery by 10% in freshwater and by 20% in seawater. In the presence of 75 ppm of PAX, maximum recovery reached 50% in freshwater and 80% in seawater. These results suggest that cationic bridges formed by seawater ions, combined with CaOH+ activation, play a critical role in pyrite activation, even in the presence of depressants.

One step synthesis of carboxymethyl cellulose/graphene oxide composites for removal of copper ion from aqueous solution

Excessive heavy metal ions in the environment often have an impact on plant growth and human health. In this study, carboxymethyl cellulose/graphene oxide composites (CMC/GO) were prepared by a simple solution blending evaporation method to remove copper ions. The structure of CMC/GO was characterized by Fourier transform infrared spectroscopy, X-ray diffraction, Scanning electron microscope, Brunauer–Emmett–Teller and X-rayphotoelectron spectroscopy. The results showed that the maximum adsorption capacity of the adsorbent CMC/GO reached 26.05 mg/g, when the pH of the solution was 5, the initial concentration of copper ions was 80 mg/L, and the dosage of the adsorbent was 0.4 g. The adsorption of copper ions onto CMC/GO is validated by the pseudo-second-order kinetics model (R = 0.99949), and the adsorption isotherm data was fitted well with the Langmuir isotherm (R = 0.9990). Thermodynamic data showed that the adsorption process of copper ions by composite CMC/GO is a spontaneous endothermic reaction (ΔG < 0, ΔH > 0). Moreover, the adsorbent showed better recyclability and the adsorption efficiency can still reach 85.0 % after 5 adsorption-desorption cycles.

Leaching Thermodynamics of Low-Grade Copper Oxide Ore from [(NH4)2SO4]-NH3-H2O Solution.

This paper describes a highly alkaline low-grade copper oxide ore. Copper can be selectively leached out while other metals are retained. A thermodynamic model of the CuO-(NH4)2SO4-NH3-H2O system was established for the leaching of tenorite (CuO) under conditions of mass and charge conservation. MATLAB's fitting functions, along with the diff and solve functions, were used to calculate the optimal ammonia concentration and total copper ion concentration of tenorite under different ammonium sulfate concentrations. The effects of various ammonia-ammonium salt solutions (ammonium sulfate, ammonium carbonate, ammonium chloride) on the copper leaching rate were investigated. Results show that under the conditions of an ammonia concentration of 1.2 mol/L, an ammonia-ammonium ratio of 2:1, a liquid-solid ratio of 3:1, a temperature of 25 °C, and a leaching time of 4 h, the copper leaching rate from the ammonium sulfate and ammonium chloride solutions reaches 70%, which is slightly higher than that of ammonium carbonate. Therefore, an ammonia-ammonium sulfate system is selected for leaching low-grade copper oxide due to its lower corrosion to equipment compared to the chlorination system. The impact of this study on industrial applications includes the potential to find more sustainable and cost-effective methods for resource recovery. The industry can reduce its dependence on resources and mitigate its environmental impact. Readers engaged in low-grade oxidized copper research will benefit from this study.

Selective fluorescence sensors for Cu2+ and Hg2+ ions using acridinium-polymer complexes

The photophysical properties of two acridinium derivatives, 9-phenyl-10-methylacridinium (Ph-Arc+) and 9-mesityl-10-methyl acridinium (Mes-Acr+) were investigated in aqueous solutions of poly(methacrylic acids) (PMAA) at various pH values with various polymer to dye (R/D) ratios. In acidic conditions, PMAA effectively turned on the emission of both acridinium derivatives. Micromolar concentrations of copper (II) ions can selectively turn off the emission of dye/PMAA mixtures with a linear response range from 0.50 to 10.0 µM and a detection limit as low as 0.38 µM. In near neutral conditions, Mes-Acr+ in PMAA solutions displayed extremely weak emission. However, trace amounts of Hg2+ ions can instantly turn on the emission with a low detection limit of 43.6 nM and a linear range between 1.0 to 10.0 µM. This analytical method is fast, cost-effective, and environmentally friendly, as it is conducted in 100 % aqueous solution with commercial acridinium derivatives and a biocompatible polymer.

Ratiometric Fluorescent Probes for Copper Ion Detection and Cuproptosis Studies

Abstract: This study reviews the latest progress of ratiometric fluorescent probes of copper ions from 2022 till now. As a key trace element in biological systems, copper ions play an important role in a variety of biological processes. However, the abnormal change in copper ion concentration is closely related to a variety of diseases, so the development of highly sensitive and highly selective copper ion detection methods is of great significance for scientific research and clinical diagnosis. In this paper, we first introduced the classification of copper ion fluorescence probes, including molecular sensors based on five-membered azocycles, six-membered azocycles, imide groups (R2C=NR'), oxygen and nitrogen functional groups (such as ethers, aldehydes, ketones, esters, carboxylic acids and hydroxyl groups) and group ⅥA elements. Subsequently, the application of nanosensors in the detection of copper ions is further discussed, especially the nanosensors in which copper is used as a reactant, catalyst or alternative reaction. Finally, the current research status of copper ion fluorescence probes is summarized, and the future development direction is prospected in order to provide reference and inspiration for the design of new high-efficiency copper ion detection tools.

Copper ions-photo dual-crosslinked alginate hydrogel for angiogenesis and osteogenesis.

Early healing of bone defects is still a clinical challenge. Many bone-filling materials have been studied, among which photocrosslinked alginate has received significant attention due to its good biocompatibility and morphological plasticity. Although it has been confirmed that photocrosslinked alginate can be used as an extracellular matrix for 3D cell culture, it lacks osteogenesis-related biological functions. This study constructed a copper ions-photo dual-crosslinked alginate hydrogel scaffold by controlling the copper ion concentration. The scaffolds were shaped by photocrosslinking and then endowed with biological functions by copper ions crosslinking. According to in vitro research, the dual-crosslinked hydrogel increased the compressive strength and favored copper dose-dependent osteoblast differentiation and cell surface adherence of rat bone marrow mesenchymal stem cells and the expression of type I collagen (Col1), runt-related transcription factor 2 (Runx2), osteocalcin (OCN), vascular endothelial growth factor (VEGF). In addition, hydrogel scaffolds were implanted into rat skull defects, and more angiogenesis and osteogenesis could be observed in in vivo studies. The above results show that the copper-photo-crosslinked hydrogel scaffold has excellent osseointegration properties and can potentially promote angiogenesis and early healing of bone defects, providing a reference solution for bone tissue engineering materials.

Injectable Hydrogel-Encapsulating Pickering Emulsion for Overcoming Lenvatinib-Resistant Hepatocellular Carcinoma via Cuproptosis Induction and Stemness Inhibition.

Lenvatinib resistance (LenR) presents a significant challenge in hepatocellular carcinoma (HCC) treatment, leading to high cancer-related mortality rates globally. Unlike traditional chemotherapy resistance mechanisms, LenR in HCC is primarily driven by increased cancer cell stemness. Disulfiram, (DSF), functioning as a Cu ionophore, can coordinate with Cu2+ to overcome LenR in HCC by inhibiting cancer cell stemness and cuproptosis. However, DSF faces challenges due to its poor water solubility, while copper ions present issues related to systemic toxicity during widespread use. To address this, DSF and CuO nanoparticles (NPs) were co-encapsulated to form an oil-in-water Pickering emulsion (DSF@CuO), effectively elevating DSF and copper ion concentrations within the tumor microenvironment (TME). DSF@CuO was then combined with sodium alginate (SA) to form a DSF@CuO-SA solution, which gelatinizes in situ with Ca2+ in the TME to form a DSF@CuO Gel, enhancing Pickering emulsion stability and sustaining DSF and copper ion release. A DSF@CuO Gel exhibits enhanced stability and therapeutic efficacy compared to conventional administration methods. It effectively induces mitochondrial dysfunction and cuproptosis in LenR HCC cells by downregulating DLAT, LIAS, and CDKN2A, while upregulating FDX1. Furthermore, it suppresses cancer stemness pathways through activation of the JNK/p38 MAPK pathway and inhibition of the NF-κB and NOTCH signaling pathways. These findings suggest that DSF@CuO Gels are a promising therapeutic strategy for treating LenR HCC. In vivo and in vitro LenR HCC models demonstrated significant therapeutic efficacy. In conclusion, this novel approach underscores DSF@CuO Gel's potential to overcome LenR in HCC, offering a novel approach to address this clinical challenge.

Influence of Copper on Oleidesulfovibrio alaskensis G20 Biofilm Formation.

Copper is known to have toxic effects on bacterial growth. This study aimed to determine the influence of copper ions on Oleidesulfovibrio alaskensis G20 biofilm formation in a lactate-C medium supplemented with variable copper ion concentrations. OA G20, when grown in media supplemented with high copper ion concentrations of 5, 15, and 30 µM, exhibited inhibited growth in its planktonic state. Conversely, under similar copper concentrations, OA G20 demonstrated enhanced biofilm formation on glass coupons. Microscopic studies revealed that biofilms exposed to copper stress demonstrated a change in cellular morphology and more accumulation of carbohydrates and proteins than controls. Consistent with these findings, sulfur (dsrA, dsrB, sat, aprA) and electron transport (NiFeSe, NiFe, ldh, cyt3) genes, polysaccharide synthesis (poI), and genes involved in stress response (sodB) were significantly upregulated in copper-induced biofilms, while genes (ftsZ, ftsA, ftsQ) related to cellular division were negatively regulated compared to controls. These results indicate that the presence of copper ions triggers alterations in cellular morphology and gene expression levels in OA G20, impacting cell attachment and EPS production. This adaptation, characterized by increased biofilm formation, represents a crucial strategy employed by OA G20 to resist metal ion stress.

Excess copper promotes an increase in the concentration of metabolites in Tridax procumbens L.

The study investigated the effects of cultivating Tridax procumbens in hydroponic conditions with different concentrations of copper ions, aiming to understand the physiological changes and the impact on the biosynthesis of secondary metabolites. The treatments consisted of a completely randomized design, with five increasing concentrations of copper (T0 = 0.235, T1 = 12.5, T2 = 25, T3 = 50, T4 = 100µmol L-1 of Cu), under controlled conditions for 36days. Analysis of bioactive compounds in leaves was performed by HPLC-DAD and ESI-MS. Several phenolic compounds, alkaloids, phytosterols and triterpenoids were identified, demonstrating the plant's metabolic plasticity. The highest dose of copper (100µmol L-1) significantly promoted voacangine, the most predominant compound in the analyses. Notably, 66.7% of the metabolites that showed an increase in concentration, were phenolic compounds. Furthermore, treatments with 12.5 and 25µmol L-1 of copper were identified as promoting the biosynthesis of phytosterols and triterpenoids. These biochemical adaptations can play a fundamental role in the survival and development of plants in environments contaminated by metals, and from this it is possible to determine cultivation techniques that maximize the biosynthesis of the compound of interest.

Inhibitory Effect of Combined Exposure to Copper Ions and Polystyrene Microplastics on the Growth of Skeletonema costatum

As two significant pollutants, the increased concentrations of copper ions and microplastics in coastal waters pose a substantial threat to the health of marine ecosystems. This study explored the individual and combined toxic effects of copper ions and microplastics on the marine diatom Skeletonema costatum. The results indicated that copper ions at a concentration of 0.05 mg/L exerted a negative impact on the growth of S. costatum; however, the influence of microplastics on algal cell growth was more complex: there was no significant inhibition of algal cell growth observed within the first 72 h of cultivation, but a pronounced negative effect on cell growth was noted between 72 and 96 h, with high concentrations (10.00 mg/L) of microplastics even causing a premature stagnation phase in algal cell growth. When both pollutants were present simultaneously, their impact on cell growth was similar to that of the microplastic pollution group, yet the growth condition was better than that of the copper ion pollution group. Through investigation of adsorption rates and toxicity mitigation rates, it was found that the adsorption of copper ions by microplastics was a significant reason for the improved growth condition of algal cells in the mixed pollution group compared to the copper ion pollution group. However, in the later stages of cultivation, the inhibitory effect of microspheres on algal cell growth counteracted their mitigating effect on copper ion toxicity. This study provides a reference for evaluating the impact of microplastics and heavy metals on coastal ecosystem health and for revealing the interactions between different pollutants.

Copper Ion Removal by Adsorption Using Fly Ash-Based Geopolymers: Process Optimization Insights from Taguchi and ANOVA Statistical Methods.

The present study aimed to use geopolymer materials synthesized from different fly ashes, which are promising for the adsorption of copper ions from aqueous solutions. The characterization of fly ashes and prepared adsorbents was performed by energy-dispersive X-ray spectroscopy (EDS) analysis, Brunauer-Emmett-Teller (BET) surface area analysis, and Scanning Electron Microscopy (SEM). Taguchi and ANOVA methods were used to predict the effect of different working parameters on copper ion removal by prepared geopolymers. Based on data obtained by the Taguchi method, it was found that the factor most influencing the adsorption process is the type of adsorbent used, followed by the solution pH, the reaction time, the adsorbent dose, and the initial copper ion concentration. The ANOVA results agree with the Taguchi method. The optimal conditions of the adsorption process were: fly ash C modified by direct activation with 2 M NaOH, at 70 °C for 4 h, solution pH of 5, initial pollutant concentration of 300 mg/L, 40 g/L adsorbent dose, and 120 min of reaction time. Copper ion removal efficiency was determined experimentally under optimal conditions, achieving a value of 99.71%.

Characteristics of the Fatty Acid Composition of the Vacuolar Membrane Lipids Under the Conditions of Stress Induced by Copper Ions

The effect of different concentrations of copper ions (100 and 500 µM) on the fatty acid composition of the vacuolar membrane lipids of beet root tissues (Beta vulgaris L.) was studied. Exposure to 100 μM copper led to an increase in the content of FAs by 57 μg/mg of total lipids as compared to the control. Stearoyl desaturase (SDR) activity decreased from 0.87 in the control to 0.77 at 100 μM copper. Exposure to 500 μM copper caused an increase in the SDR activity up to 0.93, but the proportion of FAs decreased by 50 μg/mg of total lipids compared with 100 μM copper. In addition, there was an increase in the saturation of tonoplast lipids to 44 and 40% at 100 and 500 μM Cu²⁺, respectively. The results suggest that FAs of tonoplast lipids are involved in the stress response mechanisms induced by excessive Cu²⁺ concentrations.

Preparation of Visible Light Responsive SnO2/Cu2O p-n Heterojunction and Its Photocatalytic Degradation of Methylene Blue

In this article, the SnO2/Cu2O p-n heterojunction composite thin films were successfully prepared. XRD, SEM, XPS, UV-Vis DRS, PL and electrochemical tests are adopted to characterize and analyze the structure, composition and photoelectric properties of the SnO2/Cu2O. The influence of the copper ion concentration in the electrolyte solution on the performance of the samples was studied. Methylene blue was considered as the target degradation molecule to evaluate the photocatalytic performance of the prepared samples. The results show that the forbidden band width of the SnO2/Cu2O increases obviously, and the photoluminescence intensity decreases on the contrary. The formation of SnO2/Cu2O p-n heterojunction effectively improves photogenerated carrier separation. The catalytic performance of the photocatalyst was enhanced. Photocatalytic evaluation showed that the degradation rate of SnO2/Cu2O to the methylene blue reached 93.7%.

Nitrogen–silicon Co-doped carbon dots synthesized based on lemon peel for copper (II) detection via a dynamic quenching mechanism

As a metal, copper plays an important role in biological systems. However, excessive intake can lead to toxicity and disease. Therefore, there is a need to establish accurate and sensitive methods to detect and monitor copper levels in food and the environment. Herein, nitrogen-silicon co-doped carbon dots (N,Si-CDs) were synthesized using lemon peel as the biomass precursor by one-step hydrothermal synthesis with the addition of citric acid solution and 3-aminopropyl triethoxysilane (APTES). The prepared N,Si-CDs showed excellent photobleaching resistance, brilliant fluorescence performance and good selectivity. The experiments showed that the fluorescence of N,Si-CDs decreased after the interaction of N,Si-CDs with copper ions. Further studies showed that the decrease in fluorescence intensity of the fluorescent probe due to Cu2+ was dynamic quenching. In addition, the fluorescence intensity of N,Si-CDs showed a good linear relationship with the concentration of copper ions. The linear range was 0.5 μM–250 μM, the R2 was 0.995, and the limit of detection was 0.43 μM. Finally, the method has been successfully applied to the detection of copper ions in the water environment and food, and the recoveries of 99.4%–102.1 % were obtained, which indicated that the method had a promising future.

Investigation of copper-induced intestinal damage and proteome alterations in Takifugu rubripes: Potential health risks and environmental toxicology detection

Copper is one of the predominant water pollutants. Excessive exposure to copper can cause harm to animal health, affecting the central nervous system and causing blood abnormalities. Cuproptosis is a novel form of cell death that differs from previous programmed cell death methods. However, the impact of copper on the intestines remains unclear. Therefore, we investigated the effects of different concentrations of copper exposure on the intestinal proteome of Takifugu rubripes (T. rubripes). Relevant biomarkers were used to detect cuproptosis. We revealed the crosstalk relationship between cuproptosis and self-rescue at different concentrations, and discussed the feasibility of using potential cuproptosis indicators as anti-infection factors. We observed intestinal damage in the three copper exposure groups, especially in T. rubripes treated with 100 and 500 μg/L copper, with shedding and breakage of intestinal villus and fuzzy and loose structure of intestinal mucosa. The presence of copper stress not only causes cuproptosis but also oxidative damage caused by reactive oxygen species (ROS). The results of quantitative proteomics by TMT showed that compared to the 50 and 100 μg/L copper exposure groups, the expression of glutaminase, pyruvate kinase, and skin mucus lectin in the 500 μg/L group was significantly increased. The positive mediators COX5A and CTNNB1, as well as the negative mediators CD4 and FDXR, were found to be differentially expressed. Using the protein expression trends of cuproptosis indicator factors FDX1 and DLAT to indicate the concentration of copper ions in the environment. In addition, we found a new effect of promoting ferroptosis: providing additional copper ions can activate the phenomenon of ferroptosis. Our results expand our understanding of the potential health risks of copper in T. rubripes. At the same time, it is of great significance for the process of copper poisoning and the development of new environmental toxicology detection reagents.

O-215 Copper oxide nanoparticles (CuONPs) impairs mitophagy and promotes DNA methylation to suppress mouse embryonic pluripotency

Abstract Study question Does exposure to copper oxide nanoparticle (CuONPs) have adverse effects on early embryonic development? What is the potential mechanism? Summary answer CuONPs exposure can damage mitophagy and lead to α-KG reduction, resulting DNA hypermethylation, thereby reducing the pluripotency of pre-implantation embryos in mice. What is known already Environmental nanomaterials contamination is a great concern for organisms including human. Exposure to nanomaterials have been associated with fecundity and fertility in couples conceiving via assisted reproduction technology. Among these bio-effects, nanomaterials induced epigenetic changes are of particular interest. Copper oxide nanoparticles (CuONPs) are widely used in a huge range of applications which might pose potential risk to organisms. Recent studies reported that CuONPs exposure resulted in transgenerational toxicity in Caenorhabditis elegans associated with possible epigenetic regulation. However, whether CuONPs exposure affect mammalian embryonic development, and if so the underlying mechanisms, are unclear. Study design, size, duration For the human experiments, we measured the copper ion content in women’s urine, and assessed the expression of pluripotent genes in 3PN embryos treated with CuONPs. For the embryo experiments, we collected zygotes from ICR mice and cultured them in KSOM medium with CuONPs (10 μg/mL) until blastocyst stage. For the cell experiments, we treated mouse embryonic stem cells (mESCs) with CuONPs (2 μg/mL) for four days to detect cell proliferation and pluripotency. Participants/materials, setting, methods The ICP-MS method was used to detect copper ion content in women’s urine. Time–lapse incubator was used to document the developmental potential of embryos. To quantify the metabolites of embryo, we employed metabolomics. Single-cell multiomics sequencing that enables profiling of genome-wide chromatin accessibility, DNA methylation and RNA expression were performed to detect genes expression and epigenetic modification. We used real-time PCR, immunofluorescence, and western blot to measure the expression of pluripotency related genes. Main results and the role of chance In human, we discovered a significant negative relationship between the urine’s copper ion content and clinical pregnancy rate. In embryo experiments, CuONPs exposure has been shown to have adverse effects on embryo developmental potential, resulting morula and blastocyst transformation arrest, as well as reduction in blastocyst rate and live birth rate. Furthermore, CuONPs treatment led to a reduction in blastocyst quality, indicating a decrease in blastocyst cell count, particularly in ICM cells. CuONPs also inhibited the pluripotency of blastocysts and mESCs, showing down-regulated expression of pluripotent genes. Mechanistically, CuONPs aggregated in lysosomes and decreased the mitophagic flux of embryos, which caused damaged mitochondria to accumulate and ultimately caused mitochondrial dysfunction. Notably, in embryos treated with CuONPs, there was a decrease in α-ketoglutarate (α-KG) due to the disruption of the tricarboxylic acid (TCA) cycle. α-KG is an essential cofactor for α-KG dependent dioxygenases such as the ten-eleven translocation (TET) family of DNA demethylase. The lack of α-KG in CuONPs-treated embryos led to DNA hypermethylation, which reduced chromatin accessibility, and suppressed the expression of pluripotent genes like sox2, klf2, and klf4. The poor pluripotency ultimately leads to abnormal embryonic development in CuONPs-treated embryos. Limitations, reasons for caution The molecular mechanism by which CuONPs arrest the development of pre-implantation embryos remains to be determined. In addition, future work should be extended to human embryos to determine whether this mechanism is conserved between mice and humans. Wider implications of the findings The findings of this work indicated the relationship between CuONPs and epigenetic modification. The results will support a more thorough understanding into the biosafety of CuONPs, and offer fresh perspectives on the potential uses of nanomaterials in the field of reproductive medicine in the future. Trial registration number Not Applicable

Disulfiram downregulates ferredoxin 1 to maintain copper homeostasis and inhibit inflammation in cerebral ischemia/reperfusion injury

In the current study, we aimed to investigate whether disulfiram (DSF) exerts a neuroprotective role in cerebral ischemiareperfusion(CI-RI) injury by modulating ferredoxin 1 (FDX1) to regulate copper ion (Cu) levels and inhibiting inflammatoryresponses. To simulate CI-RI, a transient middle cerebral artery occlusion (tMCAO) model in C57/BL6 mice was employed. Mice were administered with or without DSF before and after tMCAO. Changes in infarct volume after tMCAO were observed using TTC staining. Nissl staining and hematoxylin–eosin (he) staining were used to observe the morphological changes of nerve cells at the microscopic level. The inhibitory effect of DSF on initial inflammation was verified by TUNEL assay, apoptosis-related protein detection and iron concentration detection. FDX1 is the main regulatory protein of copper death, and the occurrence of copper death will lead to the increase of HSP70 stress and inflammatory response. Cuproptosis-related proteins and downstream inflammatory factors were detected by western blotting, immunofluorescence staining, and immunohistochemistry. The content of copper ions was detected using a specific kit, while electron microscopy was employed to examine mitochondrial changes. We found that DSF reduced the cerebral infarction volume, regulated the expression of cuproptosis-related proteins, and modulated copper content through down regulation of FDX1 expression. Moreover, DSF inhibited the HSP70/TLR-4/NLRP3 signaling pathway. Collectively, DSF could regulate Cu homeostasis by inhibiting FDX1, acting on the HSP70/TLR4/NLRP3 pathway to alleviate CI/RI. Accordingly, DSF could mitigate inflammatory responses and safeguard mitochondrial integrity, yielding novel therapeutic targets and mechanisms for the clinical management of ischemia–reperfusion injury.