Copper-catalyzed Click Research Articles

Upconversion-Linked Immunoassay for the Diagnosis of Honeybee Disease American Foulbrood

American foulbrood (AFB) caused by the bacterium Paenibacillus larvae is the most destructive disease of the honeybee brood. Therefore, rapid and sensitive detection methods are required to limit spreading of this pathogen, which has a major impact on agriculture and biodiversity. While P. larvae is typically detected by microbial cultivation or polymerase chain reaction, antibody-based detection represents a viable alternative. Here, we prepared an antibody specific for P. larvae and used it for the development of an upconversion-linked immunosorbent assay (ULISA). Photon-upconversion nanoparticles (UCNP) were conjugated to streptavidin via a PEG-linker using copper-catalyzed click chemistry to replace the enzyme label in conventional enzyme-linked immunosorbent assay (ELISA). The ULISA showed low cross-reactivity and provided a limit of detection of 2.9 × 10 <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">3</sup> CFU/mL, representing a 22-fold improvement compared to the ELISA. This level is within the bacterial loads present in honeybee larvae during an AFB infection. The assay was successfully applied to the analysis of spiked samples of bees, larvae, and hive debris.

Your mother was right, washing matters: An alkyne-analog of ibuprofen reveals unwanted reactivity of aromatic compounds with proteins during copper-catalyzed click chemistry

Bioorthogonal chemistry, in particular the copper(I)-catalyzed azide-alkyne cycloaddition (CuAAC), has enabled the robust identification of covalent protein targets of probes and drugs. Ibuprofen is commonly used pain and fever reducer and is sold as an enantiomeric racemate. Interestingly, the stereoisomers can be enzymatically converted through an ibuprofen-CoA thioester intermediate, which might non-specifically react with protein nucleophiles. Here, we use an alkyne-analog of ibuprofen to make two discoveries. First, we find that ibuprofen likely does not result in notable chemical labeling of proteins. However, we secondly find that aromatic compounds can react with proteins during the CuAAC reaction unless they are appropriately washed out of the mixture. This second discovery of false positive labeling has important technical implications for the application of this approach.

Boronic Acid Functionalized Nanosilica for Binding Guest Molecules.

Dendritic fibrous nanosilica (DFNS) has very high surface area and well-defined nanochannels; therefore, it is very useful as supporting material for numerous applications including catalysis, sensing, and bioseparation. Due to the highly restricted space, addition of molecular ligands to DFNS is very challenging. This work studies how ligand conjugation in nanoscale pores in DFNS can be achieved through copper-catalyzed click reaction, using an optional, in situ synthesized, temperature-responsive polymer intermediate. A clickable boronic acid is used as a model to investigate the ligand immobilization and the molecular binding characteristics of the functionalized DFNS. The morphology, composition, nanoscale pores, and specific surface area of the boronic acid functionalized nanosilica were characterized by electron microscopy, thermogravimetric and elemental analysis, Fourier transform infrared spectroscopy, and nitrogen adsorption–desorption measurements. The numbers of boronic acid molecules on the modified DFNS with and without the polymer were determined to be 0.08 and 0.68 mmol of ligand/g of DFNS, respectively. We also studied the binding of small cis-diol molecules in the nanoscale pores of DFNS. The boronic acid modified DFNS with the polymer intermediate exhibits higher binding capacity for Alizarin Red S and nicotinamide adenine dinucleotide than the polymer-free DFNS. The two types of boronic acid modified DFNS can bind small cis-diol molecules in the presence of large glycoproteins, due in large part to the effect of size exclusion provided by the nanochannels in the DFNS.

Solution-Based Alkyne–Azide Coupling on Functionalized Si(001) Prepared under UHV Conditions

Synthesis of organic bi-layers on silicon was realized by a combination of surface functionalization under ultra-high vacuum (UHV) conditions and solution-based click chemistry. The silicon (001) surface was prepared with a high degree of perfection in UHV and functionalized via chemoselective adsorption of ethinyl cyclopropyl cyclooctyne from the gas phase. A second organic layer was then coupled in acetonitrile via the copper-catalyzed alkyne azide click reaction. The samples were directly transferred from UHV via the vapour phase of the solvent into the solution of reactants and back to UHV without contact to ambient conditions. Each reaction step was monitored by means of X-ray photoelectron spectroscopy in UHV; the N 1s spectra clearly indicated the click reaction of the azide group in the two test molecules employed, i.e., methyl-subsituted benzylazide and azide substituted pyrene. In both cases, up to 50 - 60 % of the ethinyl cyclopropyl cyclooctyne molecules on the surface were reacted.

An unprecedented formation of new copper(II) complexes as bioactive materials based on copper-catalyzed click reaction

1,2-cyclohexanedione-bis(p-fluorobenzohydrazone) (L) was synthesized as a bisaroylhydrazone type compound. This molecule was reacted with Cu(NO3)2·3H2O in CH3CN under ambient conditions, and consequently, different types of complexes were obtained: mononuclear copper(II) complexes with the general formula: [Cu(TE)(NO3)2] (1 and 2), and a trinuclear copper(II) complex: [{Cu3(μ3-OH)(T)3(NO3)2}2] (3) (TE: triazole-ester type ligands; T: triazole type ligands). These ligands are formed in situ as intermediates via the oxidation of L by Cu(II) ion on the basis of copper(II)-catalyzed reaction. The prepared compounds were characterized and their structures were determined based on various techniques. On the basis of X-ray crystallography, compounds 1 and 2 are confirmed as mononuclear copper(II) complexes. In each of these complexes, Cu is bound to the 1-N of two triazole-ester type ligands (monodentate ligand), and two binding nitrate ions. The main difference between 1 and 2 is that, in 1, the binding nitrate ions are bound to Cu(II) in a bidentate mode, and thus, the copper(II) ion is 6-fold coordinated in a distorted octahedral coordination environment. In 2, the binding nitrate ions are bound to Cu(II) in a monodentate mode, and hence, the copper(II) ion in this compound is 4-fold coordinated with a distorted square planar coordination environment. On the other hand, the asymmetric unit of 3 contains two independent molecules with identical constitution. The structure of each molecule comprises a {Cu3(μ3-OH)} core held up by three triazole type ligands and two binding nitrate ion. Moreover, the growth inhibitory activity of L, 1, 2 and 3 against some selected bacterial strains was evaluated. Based on this study, the prepared compounds have shown a differentiated growth inhibitory activity with respect to their lipophilic nature and structural features.

Click Conjugation of Boron Dipyrromethene (BODIPY) Fluorophores to EGFR-Targeting Linear and Cyclic Peptides.

Through a simple 1,3-cycloaddition reaction, three BODIPY-peptide conjugates that target the extracellular domain of the epidermal growth factor receptor (EGFR) were prepared and their ability for binding to EGFR was investigated. The peptide ligands K(N3)LARLLT and its cyclic analog cyclo(K(N3)larllt, previously shown to have high affinity for binding to the extracellular domain of EGFR, were conjugated to alkynyl-functionalized BODIPY dyes 1 and 2 via a copper-catalyzed click reaction. This reaction produced conjugates 3, 4, and 5 in high yields (70–82%). In vitro studies using human carcinoma HEp2 cells that overexpress EGFR demonstrated high cellular uptake, particularly for the cyclic peptide conjugate 5, and low cytotoxicity in light (~1 J·cm−2) and darkness. Surface plasmon resonance (SPR) results show binding affinity of the three BODIPY-peptide conjugates for EGFR, particularly for 5 bearing the cyclic peptide. Competitive binding studies using three cell lines with different expressions of EGFR show that 5 binds specifically to EGFR-overexpressing colon cancer cells. Among the three conjugates, 5 bearing the cyclic peptide exhibited the highest affinity for binding to the EGFR protein.

Self-Catalyzed Sensitization of CuO Nanowires via a Solvent-free Click Reaction.

Recent advances in organic surface sensitization of metal oxide nanomaterials focused on two-step approaches with the first step providing a convenient functionalized chemical "hook", such as an alkyne functionality connected to a carboxylic group in prop-2-ynoic acid. The second step then took advantage of copper-catalyzed click chemistry to deliver the desired structure (such as benzyl or perylene) attached to an azide to react with the surface-bound alkyne. The use of this approach on CuO not only resulted in a successful morphology preserving chemical modification but also has demonstrated that surface Cu(I) can be obtained during the process and promote a surface-catalyzed click reaction without additional copper catalyst. Here, it is demonstrated that this surface-catalyzed chemistry can be performed on a surface of the CuO nanomaterial without a solvent, as a "dry click" reaction, as confirmed with spectroscopic and microscopic investigations with X-ray photoelectron spectroscopy, Fourier transform infrared spectroscopy, X-ray diffraction, solid-state nuclear magnetic resonance, and scanning electron microscopy. Computational studies provided instructive information on the interaction between the surface prop-2-yonate and azide functional group to better understand the mechanism of this surface-catalyzed click reaction.

Genetic Code Expansion Enables Site-Specific PEGylation of a Human Growth Hormone Receptor Antagonist through Click Chemistry.

Regulation of human growth hormone (GH) signaling has important applications in the remediation of several diseases including acromegaly and cancer. Growth hormone receptor (GHR) antagonists currently provide the most effective means for suppression of GH signaling. However, these small 22 kDa recombinantly engineered GH analogues exhibit short plasma circulation times. To improve clinical viability, between four and six molecules of 5 kDa poly(ethylene glycol) (PEG) are nonspecifically conjugated to the nine amines of the GHR antagonist designated as B2036 in the FDA-approved therapeutic pegvisomant. PEGylation increases the molecular weight of B2036 and considerably extends its circulation time, but also dramatically reduces its bioactivity, contributing to high dosing requirements and increased cost. As an alternative to nonspecific PEGylation, we report the use of genetic code expansion technology to site-specifically incorporate the unnatural amino acid propargyl tyrosine (pglY) into B2036 with the goal of producing site-specific protein-polymer conjugates. Substitution of tyrosine 35 with pglY yielded a B2036 variant containing an alkyne functional group without compromising bioactivity, as verified by a cellular assay. Subsequent conjugation of 5, 10, and 20 kDa azide-containing PEGs via the copper-catalyzed click reaction yielded high purity, site-specific conjugates with >89% conjugation efficiencies. Site-specific attachment of PEG to B2036 is associated with substantially improved in vitro bioactivity values compared to pegvisomant, with an inverse relationship between polymer size and activity observed. Notably, the B2036-20 kDa PEG conjugate has a molecular weight comparable to pegvisomant, while exhibiting a 12.5 fold improvement in half-maximal inhibitory concentration in GHR-expressing Ba/F3 cells (103.3 nM vs 1289 nM). We expect that this straightforward route to achieve site-specific GHR antagonists will be useful for GH signal regulation.

Synthesis of the Novel AT1 Receptor Tracer [18F]Fluoropyridine-Candesartan via Click Chemistry.

A novel 7-((4-(3-((2-[18F]fluoropyridin-3-yl)oxy)propyl)-1H-1,2,3-triazol-1-yl)methyl)-1H-benzo[d]imidazole derivative of the angiotensin II type-1 receptor (AT1R) blocker candesartan, [18F]fluoropyridine–candesartan, was synthesized via the copper-catalyzed azide–alkyne cycloaddition click reaction between 2-[18F]fluoro-3-(pent-4-yn-1-yloxy)pyridine ([18F]FPyKYNE) and the tetrazole-protected azido-candesartan derivative, followed by acid deprotection. This three-step, two-pot, and two-step purification synthesis was done within 2 h. The use of tris[(1-hydroxypropyl-1H-1,2,3-triazol-4-yl)methyl]amine (THPTA) as a Cu(I) stabilizing agent increased the overall radiochemical yield by 4-fold (10 ± 2%, n = 13) compared to the reaction without THPTA (2.4 ± 0.2%, n = 3; decay-corrected from 18F produced at the end-of-beam). Complete separation of [18F]FPyKYNE from its nitro precursor and [18F]fluoropyridine–candesartan from the deprotected azido-candesartan allowed for high molar activities (>380 GBq/μmol) of the tracer. The use of 0.1% trifluoroacetic acid in water for reformulation and the addition of sodium ascorbate to the final formulation (1.6 ± 0.2 GBq/mL, n = 3) prevented tracer radiolysis with >97% radiochemical purity for a period of up to 10 h after the end-of-synthesis. A significant reduction in the uptake (86 ± 3%, n = 8) of the tracer was observed ex vivo in rats (at 20 min postinjection) in the AT1R-rich kidney cortex following pretreatment with saturating doses of the AT1R antagonist candesartan or losartan. This specific binding to AT1R was confirmed in vitro in the rat renal cortex (autoradiography) by a reduction of 26 ± 5% (n = 12) with losartan coincubation (10 μM). These favorable binding properties support further studies to assess the potential of [18F]fluoropyridine–candesartan as a tracer for the positron emission tomography imaging of renal AT1R.

Boosted molecular mobility during common chemical reactions.

Mobility of reactants and nearby solvent is more rapid than Brownian diffusion during several common chemical reactions when the energy release rate exceeds a threshold. Screening a family of 15 organic chemical reactions, we demonstrate the largest boost for catalyzed bimolecular reactions, click chemistry, ring-opening metathesis polymerization, and Sonogashira coupling. Boosted diffusion is also observed but to lesser extent for the uncatalyzed Diels-Alder reaction, but not for substitution reactions SN1 and SN2 within instrumental resolution. Diffusion coefficient increases as measured by pulsed-field gradient nuclear magnetic resonance, whereas in microfluidics experiments, molecules in reaction gradients migrate "uphill" in the direction of lesser diffusivity. This microscopic consumption of energy by chemical reactions transduced into mechanical motion presents a form of active matter.

Reactions give solvents a kick

Molecular Diffusion During a chemical reaction, the reorganization of solvent molecules not directly in contact with reactants and products is normally viewed as a simple diffusion response. Wang et al. studied molecular diffusion in six common reactions—including the copper-catalyzed click reaction and the Diels-Alder reaction—with pulsed-field gradient nuclear magnetic resonance. They observed a boost in mobility relative to Brownian diffusion that was stronger for the catalyzed reactions that were studied. The mobilities for the click reaction were verified with a microfluidic gradient method. They argue that energy release produces transient translational motion of reacting centers that mechanically perturbs solvent molecules. Science , this issue p. [537][1] [1]: /lookup/doi/10.1126/science.aba8425

Terminal Uridylyl Transferase Mediated Site-Directed Access to Clickable Chromatin Employing CRISPR-dCas9.

Locus-specific interrogation of target genes employing functional probes such as proteins and small molecules is paramount in decoding the molecular basis of gene function and designing tools to modulate its downstream effects. In this context, CRISPR-based gene editing and targeting technologies have proved tremendously useful, as they can be programmed to target any gene of interest by simply changing the sequence of the single guide RNA (sgRNA). Although these technologies are widely utilized in recruiting genetically encoded functional proteins, display of small molecules using CRISPR system is not well developed due to the lack of adequate techniques. Here, we have devised an innovative technology called sgRNA-Click (sgR-CLK) that harnesses the power of bioorthogonal click chemistry for remodeling guide RNA to display synthetic molecules on target genes. sgR-CLK employs a novel posttranscriptional chemoenzymatic labeling platform wherein a terminal uridylyl transferase (TUTase) was repurposed to generate clickable sgRNA of choice by site-specific tailoring of multiple azide-modified nucleotide analogues at the 3' end. The presence of a minimally invasive azide handle assured that the sgRNAs are indeed functional. Notably, an azide-tailed sgRNA targeting the telomeric repeat served as a Trojan horse on the CRISPR-dCas9 system to guide synthetic tags (biotin) site-specifically on chromatin employing copper-catalyzed or strain-promoted click reactions. Taken together, sgR-CLK presents a significant advancement on the utility of bioorthogonal chemistry, TUTase, and the CRISPR toolbox, which could offer a simplified solution for site-directed display of small molecule probes and diagnostic tools on target genes.

Ligand-assisted click reaction for the synthesis of new hybrid compounds based on 1,2,3-triazoles and 5,5-diphenylimidazolidine-2,4-dione and evaluation of their antibacterial activities

The new hybrid compounds based on 1,2,3-triazoles and 5,5-diphenylimidazolidine-2,4-dione were successfully synthesized by copper-catalyzed click reaction in the presence of water-soluble ligand, sodium 4-amino-5-hydroxy-7-sulfonaphthalene-2-sulfonate and copper salt. The click reaction of 5,5-diphenyl-3-(prop-2-yn-1-yl)imidazolidine-2,4-dione and 5,5-diphenyl-1,3-di(prop-2-yn-1-yl)imidazolidine-2,4-dione with aryl azides or sodium azide and benzyl chloride in water produced new 1,2,3-triazoles linked-5,5-diphenylimidazolidine-2,4-dione. The 4-amino-5-hydroxy-7-sulfonaphthalene-2-sulfonate was used as ligand, which enhanced the reactions and reduced the quantity of the toxic copper salt. The in vitro antibacterial activities of the all synthesized compounds were screened against the Gram-positive and Gram-negative bacteria, by the use of well diffusion method. The results showed that all compounds were active against both M. luteus and P. aeruginoasa bacteria.

Redox-Active Vertically Aligned Mesoporous Silica Thin Films as Transparent Surfaces for Energy Storage Applications.

Organic-inorganic hybrid membranes, made of a high density of redox active moieties covalently bonded to the internal surfaces of vertically aligned mesoporous silica thin films, are relevant for applications in transparent energy storage devices. This is demonstrated here on the basis of functionalized transparent mesoporous silica thin films prepared on the indium-tin oxide electrode from the combination of an electrochemically induced self-assembly method (to generate azide-functionalized silica) and a copper-catalyzed azide-alkyne click reaction (to derivatize the material with electroactive groups). The very small thickness (105 nm) and the uniformly distributed vertical mesochannels with ultranarrow diameter (2 nm) make the hybrid film a promising substrate that not only achieves a transparency of 82% but also provides large surface area to accommodate a high density of redox active species such as ferrocene. In such rigid and insulating porous membranes, the charge transfer reactions take place through a pure electron-hopping mechanism between adjacent redox sites, which are favored by the ordered and oriented mesostructure containing large amounts of uniformly distributed ferrocene functions in the mesochannels. Their performance results from both high charge transfer rates (electron hopping) and easy mass transport (fast diffusion of counter ions). The most effective system is the ferrocene-functionalized silica film prepared from 40% organosilane, which is able to deliver a capacity of 105 C cm-3 (1.10 mC cm-2) at a current density of 0.4 A cm-3 (with up to 48% capacity retention achieved at a charging time as short as 2.8 s). Such an electrode can be associated to an electrodeposited graphene anode in a solid-state battery-capacitor hybrid device, which can deliver 0.74 mC cm-2 at a potential scan rate of 20 mV s-1. The azide-functionalized mesoporous silica film is actually a versatile platform that can be functionalized with different redox molecules, as shown here for cobaltocenium moieties, which may broaden its application field.

Dendrimer mediated targeted delivery of sinomenine for the treatment of acute neuroinflammation in traumatic brain injury

Traumatic brain injury (TBI) is a significant medical problem with limited treatment options and is one of the main causes of life-long disability. Neuroinflammation orchestrated by activated microglia/macrophages at the site of injury plays a critical role in the onset of many pathological events following TBI, leading to blood brain barrier (BBB) dysfunction, neuronal damage and long term neuronal and behavioral deficits. Current treatment involves intravenous administration of anti-inflammatory drugs which have limited clinical outcomes only when dosed within the early time window after injury. Hence there is an urgent need to develop improved drug delivery systems which have potential to cross impaired BBB, target and deliver drugs selectively to activated microglia/macrophages at the sites of injury, and suppress the detrimental effects of acute inflammation. In this study, we have used Sinomenine (Sino), a potent anti-inflammatory and antioxidant drug conjugated to hydroxyl terminated generation-4 PAMAM dendrimer (D-Sino) as a potential therapy for attenuating early inflammation in TBI. D-Sino conjugates were synthesized using highly robust copper-catalyzed click reaction with high purity. D-Sino conjugates enhanced the intracellular availability of Sino due to their rapid cellular uptake, significantly attenuated early/acute inflammation by suppressing pro-inflammatory cytokines (TNF-α, IL-1β, CCL-3 and IL-6), and reduced oxidative stress (iNOS and NO) in LPS activated murine macrophages (RAW 264.7) by inhibiting NF-κB activation and its nuclear translocation (the root cause for inflammation inception) significantly more as compared to the free drug. Upon systemic administration in a rabbit model of pediatric TBI, D-Sino conjugates specifically targeted activated microglia/macrophages at the site of injury in the brain. Single dose of D-Sino attenuated inflammation in the injured brain areas by suppressing inflammatory cytokines expression whereas free Sino treatment did not demonstrate a significant effect. Together, these results suggest that D-Sino conjugate may open up new avenues for increasing the therapeutic window in the treatment of early inflammation and for improving the efficacy of the drug in TBI. Moreover, this treatment can work in conjunction with current clinical practices such as therapeutic hypothermia and pharmacologically induced coma for many indications associated with TBI, where acute inflammation plays a critical role in disease progression.

Synthesis of regioselective chitosan copolymers with β-cyclodextrin and poly(N-isopropyl acrylamide)

This work aimed to design a synthetic route under mild conditions allowing the main chitosan chain to be grafted with β-cyclodextrin (β-CD) and poly(N-isopropyl acrylamide) (PNIPAm), at C2 and C6 positions, respectively. For this reason, the regioselectivity of proposed reactions is an important factor to be considered. β-CD is an oligosaccharide with a cyclic structure capable of forming inclusion complexes with hydrophobic molecules. Grafting β-CD onto the chitosan backbone by reductive N-alkylation at C2 position was carried out. With this purpose, the previous preparation of β-CD monoaldehyde was required. PNIPAm is a thermosensitive polymer with a transition temperature near 33 °C. To regioselectively anchor poly(N-isopropyl acrylamide) chains onto chitosan at C6 position, it was required to attach at the C6 position of chitosan an alkyl group for the subsequent grafting of PNIPAm-N3 by means of copper-catalyzed azide-alkyne cycloaddition click reaction. To guarantee the regioselectivity of the functionalization of chitosan with a C6 terminal alkyne, its oxyalkylation with glycidyl propargyl ether in a solvent composed of LiOH/KOH/urea was used. The structure of all derivatives was confirmed by FT-IR and 1H-NMR spectroscopy.

Conditional Copper-Catalyzed Azide-Alkyne Cycloaddition by Catalyst Encapsulation.

Supramolecular encapsulation is known to alter chemical properties of guest molecules. We have applied this strategy of molecular encapsulation to temporally control the catalytic activity of a stable copper(I)–carbene catalyst. Encapsulation of the copper(I)–carbene catalyst by the supramolecular host cucurbit[7]uril (CB[7]) resulted in the complete inactivation of a copper‐catalyzed alkyne–azide cycloaddition (CuAAC) reaction. The addition of a chemical signal achieved the near instantaneous activation of the catalyst, by releasing the catalyst from the inhibited CB[7] catalyst complex. To broaden the scope of our on‐demand CuAAC reaction, we demonstrated the protein labeling of vinculin with the copper(I)–carbene catalyst, to inhibit its activity by encapsulation with CB[7] and to initiate labeling at any moment by adding a specific signal molecule. Ultimately, this strategy allows for temporal control over copper‐catalyzed click chemistry, on small molecules as well as protein targets.

Click Inspired Synthesis of Novel Cinchonidine Glycoconjugates as Promising Plasmepsin Inhibitors

Among all the malaria parasites, P. falciparum is the most predominant species which has developed drug resistance against most of the commercial anti-malarial drugs. Thus, finding a new molecule for the inhibition of enzymes of P. falciparum is the pharmacological challenge in present era. Herein, ten novel molecules have been designed with an amalgamation of cinchonidine, carbohydrate moiety and triazole ring by utilizing copper-catalyzed click reaction of cinchonidine-derived azide and clickable glycosyl alkynes. The molecular docking of developed molecules showed promising results for plasmepsin inhibition in the form of effective binding with target proteins.

Chemically labeled toxins or bioactive peptides show a heterogeneous intracellular distribution and low spatial overlap with autofluorescence in bloom-forming cyanobacteria

Harmful algal blooms formed by colony-forming cyanobacteria deteriorate water resources by producing cyanotoxins, which frequently occur at high intracellular concentrations. We aimed to localize toxic microcystins (MCs) and bioactive anabaenopeptins (APs) at the subcellular level under noninvasive conditions. Since both metabolites are synthesized nonribosomally, the relaxed specificity of key enzymes catalyzing substrate activation allowed chemical labeling through a standard copper-catalyzed click chemistry reaction. The genera Planktothrix and Microcystis specifically incorporated unnatural amino acids such as N-propargyloxy-carbonyl-L-lysine or O-propargyl-L-tyrosine, resulting in modified AP or MC peptides carrying the incorporated alkyne moiety. The labeled cells were quantitatively differentiated from the unlabeled control cells. MCs and APs occurred intracellularly as distinct entities showing a cell-wide distribution but a lowered spatial overlap with natural autofluorescence. Using the immunofluorescence technique, colocalization with markers of individual organelles was utilized to relate the distribution of labeled MCs to cellular compartments, e.g., using RbcL and FtsZ (cytosol) and PsbA (thylakoids). The colocalization correlation coefficients calculated pairwise between organelles and autofluorescence were highly positive as opposed to the relatively low positive indices derived from labeled MCs. The lower correlation coefficients imply that only a portion of the labeled MC molecules were related spatially to the organelles in the cell.

Azidated Graphene: Direct Azidation from Monolayers, Click Chemistry, and Bulk Production from Graphite.

The inertness of the graphene basal plane has notably limited its viable chemical modification pathways. We report direct azidation and subsequent click chemistry of the graphene basal plane through the electrochemical oxidation of an aqueous sodium azide solution at the graphene surface. An ∼20% nitrogen-to-carbon ratio is achieved for monolayer graphene under ambient conditions and neutral pH, and the degree of functionalization is tunable through the applied voltage. The functionalized azide groups enable both copper-catalyzed and copper-free alkyne cycloaddition click chemistry, as well as subsequent bioconjugation, and fluorescence microscopy indicates uniform functionalization across the graphene surface. Notably, we find that as the azidation, cycloaddition, and bioconjugation processes substantially shift the graphene doping level, high electrical conductivity and carrier mobility are maintained throughout the different functionalization states. By integrating the electrochemical azidation scheme with electrochemical exfoliation, we further demonstrate one-step bulk production of azidated graphene flakes from graphite. We thus open a new door to the facile preparation of diverse graphene derivatives under ambient conditions.